• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

  Patent outcomesUS 8,562,324 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,562,324
• Shenzhen Tuozhu Technology Co. Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Jun 3, 2026 · IPR2025-00257 · APJ Lilan Ren · IPR · Final written decision

  Claims 1–15 are unpatentable because Petitioner proved by a preponderance of the evidence that the asserted § 103 grounds render them unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “proceeding, we determine Petitioner has proven by a preponderance of the evidence that each of claims 1–15 of the ’660 patent is unpatentable.” slip op. at 85

  Patent outcomesUS 9,592,660 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,592,660
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · May 13, 2026 · IPR2025-00032 · APJ Mitchell G Weatherly · IPR · Final written decision

  Claims 1–29 are unpatentable as obvious under §103 based on the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Petitioner submits that the ordinarily skilled artisan would have at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 30–32). Patent Owner “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For the purposes of our analysis below, we apply Petitioner’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’338 patent and the prior art.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that “amount of charge” reflects no express limitation on the manner of expressing the “amount” or the “charge.” And the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user may specify an “amount of 3 As recited in independent claims 10, 19, and 28 charge.” For example, the Specification describes that a user may specify an amount of charge by specifying a desired travel distance as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Ex. 1001, 19:49–57 (emphasis added). Therefore, “amount of charge” may also refer to a desired mileage or range. Figure 7 further demonstrates that a user may select “amount of charge” in terms of a “percent” or a “range” as shown in Petitioner’s annotated version of the pertinent portion of that figure as shown below.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree with Patent Owner. First, Patent Owner’s reliance on Wonderland as announcing a rule having broad effect is misplaced. Patent Owner contends that the “Federal Circuit has confirmed that where the primary reference already includes the function of the secondary reference, an allegation to incorporate that function into the primary reference is improper hindsight and no motivation to combine exists.” Id. at 29 (citing Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 988 F.Supp. 2d 479, 498–99 (W.D. Pa. 2013), aff'd, 644 F. App'x 1011 (Fed. Cir. 2016); citing Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed.Cir.2012))). Patent Owner’s citation to Wonderland does not support the proposition for which it is cited, namely that the Federal Circuit has “confirmed” that incorporating a function from a secondary reference into a primary reference is “improper hindsight” that precludes a motivation to combine teachings from the primary and secondary references. In Wonderland, the district court denied an accused infringer’s motion for summary judgment of invalidity, in part, due to its finding that genuine issues of material fact existed for the issue of whether sufficient motivation to combine prior art existed. Wonderland, 988 F. Supp. 2d at 511. The Wonderland decision does not constitute a final ruling on that issue, and the Federal Circuit’s summary affirmance of the final ruling by the district court does not address the issue or reflect how the issue was resolved at trial. Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Second, Petitioner also correctly points out that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2003, 54:8–55:9. Ferro also describes manual options for initiating charging, Ex. 1003¶ 146 (citing Ex. 1004 ¶ 109), and that an ordinarily skilled artisan would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without the user having to leave the vehicle, Ex. 1003 ¶¶ 151, 152. Accordingly, we find that Petitioner has established that an ordinarily skilled artisan would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “The test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference. . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” MCM Portfolio LLC v. Hewlett-Packard Co., 812 F.3d 1284, 1294 (Fed. Cir. 2015). Patent Owner’s argument fails to account for the level of skill and creativity of an ordinarily skilled artisan, who would have possessed a bachelor’s degree in engineering and could have easily accounted for the differences in scale depicted by Letendre’s and Donnelly’s controls. Ex. 1003 ¶¶ 247–249. Accordingly, we find that Petitioner’s showing on the motivation to combine teachings of Ferro, Donnelly, and Letendre to arrive at limitation 1h is persuasive. slip op. at 30

  Patent outcomesUS 11,563,338 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,563,338
• SAP America, Inc. v. Cyandia, Inc.All claims unpatentable
  PTAB · Mar 13, 2026 · IPR2024-01433 · APJ Jeffrey S Smith · IPR · Final written decision

  Claims 1–7, 10, 11, 13, 18, 19, 23, 29, 35, and 36 are unpatentable as obvious over the PCT Publication and Austin-Lane.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner asserts that a person of ordinary skill in the art at the time of filing “would have had a Bachelor’s degree in electrical engineering, computer science, or the like, and/or four or more years of experience in server-based applications” and that “[a]dditional experience may make up for a lack of education and vice versa.” PO Resp. 9. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the challenged patent and prior art, we adopt it and use “skilled artisans” to refer to people with such skill at the time the invention was filed. We do not perceive a substantive distinction between the parties’ definitions, but note that Petitioner’s definition provides more detail about the capabilities of skilled artisans. Also, the level of ordinary skill in the art can be evidenced by the references cited, and we find it commensurate with the cited references in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995); In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “device indicated by the session data” encompasses “determining a notification method based on” session data indicating the current state of the external device, where the current state of the device encompasses an online state as well as an offline state. See Pet. 53–54; Tr. 55:3–10 (The Board: “Are there any other states of an external device other than online or offline?” Patent Owner: “As far as I know, Your Honor, those are the only two[.]”), Tr. 65:24–66:1 (The Board: “When the claim says current state, they mean it’s online or offline?” Petitioner: “Correct.”), Tr. 20:23–21:8. The specification is consistent with the plain language of the claim in disclosing two examples of the claimed “current state,” namely, online and offline. Ex. 1101, 21:1–4. The specification discloses that the notification manager “queries session manager 456 to determine the user’s connectedness.” Id. at 21:6–8. The specification discloses that if the user is “online, notify by, for example, the user’s active session. If offline, notify by, for example, a txt [sic] message, call the user’s landline, call a friend of the user, and the like.” Id. at 21:1–4, 23:28–31.” slip op. at 13

  • Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner

    “Patent Owner’s expert witness, Dr. Goodrich, show written description support for providing a notification to an active external device, Patent Owner has not cited any portion of the 2009 Parent, nor any portion of the testimony of Dr. Goodrich, to show that the 2009 Parent provides written description support for determining a notification method by which to provide an alert to an external device based on the current state of the external device as offline. We highlight that Paragraphs 130 and 131 of the 2011 CIP Application disclose offline notification preferences for determining a notification method by which to provide an alert to an external device based on the current state of the external device as offline. Ex. 1110 ¶¶ 130–131. Specifically, paragraphs 130 and 131 describe that: the notification manager of the eventing and alerting subsystem 452 queries the configuration server 454 for the user's notification preferences and correlates these notification preferences with session manager 456 to determine the best notification method. That is, the notification manager queries the configuration server 454 and determines, for example, that the user has certain online notification preferences and certain offline notification preferences. If online, notify by, for example, the user's active session. If offline, notify by, for example, a txt message. . . . The notification manager of the eventing and alerting subsystem 452 then queries session manager 456 to determine the user's connectedness. Id. That is, if the user’s connectedness, or “current state” of the claimed external device, is offline, and the user’s offline notification preferences are “notify by txt message,” the notification manager will determine that the notification method for the external device having a current state of offline is by txt message. See id. Thus, the 2011 CIP Application describes a notification manager that queries a session manager to determine whether an external device is offline, and if the external device is offline, determines a notification method for providing an alert on the external device based on the current status of the external device as offline and the user’s offline notification preferences. Although we find this written description support for the determining limitation in the 2011 CIP Application, we do not find this written description support in the 2009 Parent.” slip op. at 25

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “As to the “determining a notification method” limitation (1.10), Petitioner asserts that Austin-Lane teaches determining: (1) the user device(s) to send the notification to (e.g., phone, PDA, notebook computer, desktop computer); (2) the communication protocol to use to send the notification, i.e., how to send the notification (e.g., SMTP (for email), SMS (for texts), HTTP (for web browsers)); and (3) the type of alert to provide, i.e., how to present the notification, (e.g., text, an icon, a pop-up window, a video, an email, an audible or tactile alarm), based on the current state of the at least one external device indicated by the session data (“presence information”), which may include whether and on which device(s) the user is online and/or whether and on which applications the user has an active session. Id. at 53 (internal citations omitted) (citing Ex. 1105 ¶¶ 4, 5, 29, 32, 33, 39, 46, 48, 61, 79, Fig. 1). We highlight that paragraph 61 of Austin-Lane discloses that: The type preferences 650 may include preferences for various notification types. . . . [A]uction alert #1 660 defines the following delivery precedence 663: (1) a web browser (if the user is online), (2) an IM client (if the user is online), (3) a mobile phone #1, (4) a PDA, (5) a mobile phone #2, (6) a pager, and (7) an email inbox. Ex. 1105 ¶ 61; see id. ¶¶ 74–77 (Describing that one of several notification methods for delivering an alert to a user’s device is determined based on the current state of the user’s device as online or offline). Thus, Austin-Lane describes determining a notification method by which to provide an alert on an external device based on the current state of the external device as online as well as offline.” slip op. at 29

  Patent outcomesUS 8,751,948 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips
  Patents in suitUS 8,751,948
• Adobe Inc. v. Jonathan E. JaffeNo claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01352 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–6 were not shown unpatentable under any asserted §103 ground because the references did not teach monitoring the physical coupling between the sensor and memory.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The Institution Decision adopted and applied Petitioner’s proposed level of ordinary skill because Petitioner’s “definition generally comports with the level of skill necessary to understand and implement the teachings” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “The parties present various claim construction arguments, disputing the meaning of three limitations recited in claim 1: “a sensor, which is tightly coupled to said memory”; “monitoring the integrity of the tight coupling between said memory and said sensor”; and “based on.” See Pet. 9–14; PO Resp. 5–12; Pet. Reply 4–9; PO Sur-reply 4–11. For purposes of this Decision, we do not need to discuss the construction of “based on.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). As explained below, this Decision turns on whether Glass or Rieger discloses limitation [1c] reciting “monitoring the integrity of the tight coupling between said memory and said sensor.” Ex. 1001, 20:65–66; see infra §§ II.C.2, II.E.1, II.F. That limitation recites an element which overlaps with the earlier-recited limitation “a sensor, which is tightly coupled to said memory.” To reach our decision, we need only provide a limited discussion of two of the parties’ claim construction arguments. Our analysis follows.” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “said integrity is compromised, then also providing an indication of said compromised integrity.” Ex. 1001, 20:65–21:2. Although Petitioner points out that the limitation does not expressly recite “‘specifically’ monitoring the tight coupling” (Pet. Reply 8), the structure of the clause suggests that the tight coupling is specifically monitored. At a high level, the limitation is straightforward in its recitation that the integrity being monitored is “of the tight coupling” (Ex. 1001, 20:65–66 (emphasis added)), plainly suggesting that the tight coupling is specifically monitored. More granularly, breaking the relevant clause down to its grammatical parts, the clause recites a gerund (“monitoring”) acting on a direct object (“the integrity”) which is modified by a prepositional phrase (“of the tight coupling”). Notably, the object of the preposition (“of”) is “the tight coupling.” Altogether, this reads that the integrity being monitored is specifically of the tight coupling. Also, the claim recites that “if said integrity is compromised, then also providing an indication of said compromised integrity.” Therefore, from the claim language we know that the “integrity” of the tight coupling is something that may be “compromised,” which is consistent with Patent Owner’s proposed construction of determining whether the physical coupling has been “accessed or disturbed.” Petitioner’s interpretation effectively inserts additional language into the limitation such that the limitation includes monitoring the integrity of a device containing or surrounding the tight coupling, such as a camera (or camera housing), e.g., “monitoring the integrity of a camera that includes the tight coupling.” But, because the plain reading and the structure of the limitation reads that it is specifically the tight coupling’s integrity—not another physical structure, like a camera—which is being monitored, a monitored is not consistent with the language of the claim. See PO Resp. 9 (arguing that “Petitioner’s construction is improper because the claim language explicitly requires monitoring the physical coupling between the memory and the sensor as opposed to some third structure” (emphasis omitted)).” slip op. at 17

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “package 50 does not specifically monitor the integrity of the coupling between Glass’s sensor and the memory and, instead, argues that Glass detects tampering of all “the components and interconnections contained in that packaging,” e.g., control logic 44, cropper 46, compressor 47, MUX 45, code generator 48, and the various interconnections between those components. See Pet. Reply 16; Ex. 1005, 5:13–41. As explained above, we construe “monitoring the integrity of the tight coupling between said memory and said sensor” to mean determining whether the physical 7 Petitioner does not assert that a person of ordinary skill in the art would have been motivated to modify Glass’s device in any way; Petitioner solely argues that Glass teaches limitation [1c], based on Petitioner’s proposed claim construction. See Pet. 30–32 (“Glass discloses this limitation.”); Pet. Reply 16–17 (“Glass and Rieger disclose the ‘monitoring’ step.”). disturbed, which specifically requires monitoring the physical coupling between the sensor and the memory. See supra § II.C.2. As we agree with Patent Owner that this limitation requires monitoring the physical coupling between the sensor and the memory, monitoring Glass’s tamper resistant package 50 does not teach or disclose “monitoring the integrity of the tight coupling between said memory and said sensor.” Accordingly, we determine that Petitioner fails to show that Glass teaches or suggests [1c] monitoring the integrity of the tight coupling between said memory and said sensor when said at least one internal and unique parameter is generated, and, if said integrity is compromised, then also providing an indication of said compromised integrity, as required by claim 1. Consequently, we determine that Petitioner has not shown, by a preponderance of the evidence, that the subject matter of claim 1 would have been obvious over Glass.8” slip op. at 30

  Patent outcomesUS 6,757,828 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 6,757,828

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.