• Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision

  Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12

  • BurdenNot shown unpatentable

    “referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22

  Patent outcomesUS 10,092,918 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 10,092,918
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

  Patent outcomesUS 11,844,921 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,921
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13

  • Expert testimonyPatent owner expert discountedMixed

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32

  Patent outcomesUS 10,583,449 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 10,583,449
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 7–9 and 11 are unpatentable as obvious over Goubet; proposed substitute claim 21 is denied as indefinite.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 5. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “The record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration, as asserted in Petitioner’s overall argument. See Pet. Reply 1–2. Contrary to Petitioner’s argument, in the cited general discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 2 (arguing that “Dr. Micklow’s declaration is premised on understandings of claim scope that are inconsistent with the constructions advanced by both of the parties” (emphasis added)). Instead, we read the cited portions of Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also Pet. Reply 1 (citing Ex. 1046, 112:4–12, 113:13–20, 115:15–18). Next, we turn to each of the four specific claim terms that Petitioner highlights in its further arguments.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 10–11; PO Resp. 5. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Florida Litigation a Joint Claim Construction statement that included stipulated claim constructions and disputed claim constructions for terms in the challenged patent as well as the ’449 patent and the ’918 patent. See Ex. 1018, Exhibit A (Stipulated Claim Constructions), Exhibit B (Disputed Claim Constructions). The parties stipulated to the construction of the terms “fluid dispersion” and “baffle” as recited in the challenged claim. See id., Exhibit A.10 10 When staying the Florida Litigation, the District Court cancelled the scheduled claim construction hearing. See ECF No. 67 (April 8, 2025) (granting joint motion to stay); ECF No. 68 (April 8, 2025) (cancelling the The stipulated construction of “fluid dispersion” merely restates the express definition of “fluid dispersion” from the challenged patent (although the definition is not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 3:8–20. Similarly, the stipulated construction of “baffle” essentially parrots one sentence in the challenged patent (again, not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 7:57–59. To the extent necessary, we determine that the complete record supports the parties’ stipulated constructions of “fluid dispersion” and “baffle,” and we apply those constructions below.” slip op. at 10

  Patent outcomesUS 9,527,094 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 9,527,094
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Oct 5, 2026 · IPR2025-00438 · APJ Lilan Ren · IPR · Final written decision

  Claims 1–5, 7–13, and 16–20 are unpatentable; the Board found the challenged claims unpatentable on the grounds set out in its conclusions and summary table.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s definition of the level of ordinary skill in the art, and Petitioner’s definition appears consistent with the disclosures of the ’466 patent and the prior art of record. Accordingly, we adopt Petitioner’s definition. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). C. Claim Construction” slip op. at 12

  • BurdenUnpatentable

    “Decision under 35 U.S.C. § 318(a) as to the patentability of the challenged claims of the ’466 patent. For the reasons discussed below, we determine Petitioner has established by a preponderance of the evidence that claims 1– 5, 7–13, and 16–20 of the ’466 patent are unpatentable.” slip op. at 2

  Patent outcomesUS 10,569,466 unpatentable
  Nonecites Phillips · KSR · Graham
  Patents in suitUS 10,569,466
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 29, 2026 · IPR2025-00532 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–16 are unpatentable under § 103 over Warren, Warren and Dunn, Calderon and RepRap20208, and Calderon, RepRap20208, and Dunn.

  RulingsFinal written decision

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “of ordinary skill in the art would have made the proposed combination in the manner asserted with a reasonable expectation of success. Weighing our underlying factual determinations, a preponderance of the evidence persuades us that claim 7 of the ’381 patent is unpatentable over Calderon, RepRap20208, and Dunn. Arctic Cat, 876 F.3d at 1361.” slip op. at 108

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). Whether a document qualifies as a printed publication is a legal conclusion based on underlying factual determinations. Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). slip op. at 69

  Patent outcomesUS 10,556,381 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,556,381
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.Some claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00531 · APJ Hyun J Jung · IPR · Final written decision

  Claims 1–11 and 13–15 are unpatentable over the stated obviousness grounds; claim 12 was not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Petitioner filed a Petition (Paper 2, “Pet.”) requesting institution of an inter partes review of claims 1–15 of the ’698 patent. Discretionary denial of institution was determined to be not appropriate in this proceeding, and the proceeding was referred to the Board. Paper 10. Pursuant to 35 U.S.C. § 314, we instituted an inter partes review of claims 1–15 of the ’698 patent on all presented challenges. Paper 11 (“Inst. Dec.”), 15.” slip op. at 2

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Decision is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73 (2025). For the reasons that follow, we determine that Shenzhen Tuozhu Technology Co., Ltd. (“Petitioner”) has shown by a preponderance of the evidence that claims 1–11 and 13–15, but not claim 12, of U.S. Patent No. 9,168,698 B2 (Ex. 1001, “the ’698 patent”) are unpatentable.” slip op. at 2

  Patent outcomesUS 9,168,698 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,168,698
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · Jul 13, 2026 · IPR2025-00153 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry 1 US 2009/0313034 A1, pub. Dec. 17, 2009 (Ex. 1004, “Ferro”). 2 EP 1,920,968 A1, pub. May 14, 2008 (Ex. 1005, “Oyobe”). 3 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 4 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 5 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 6 US 6,662,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). experience or technical training may offset less formal education, while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2 (citing Ex. 1003 ¶¶ 14–15). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill.” PO Resp. 17. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’987 patent and the prior art. B. Claim Interpretation” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “1. “dynamic attribute of an electric charge provider” In the Petition, Tesla proposes that we construe “dynamic attribute of an electric charge provider,” as recited in every independent claim, to mean “a changing or otherwise fluctuating cost (or price) of electricity for purchase from an electric charge provider.” Pet. 4–5. Charge Fusion responds that Tesla improperly narrows the meaning of this claim limitation. PO Resp. 15 (arguing this claim term “is not just limited to ‘changing or otherwise fluctuating cost (or price)’ as alleged by the Petition” (emphasis added)). Although we consider Tesla’s proposed construction to identify an exemplary “dynamic attribute of an electric charge provider,” we see no need to limit the meaning of this limitation as proposed by Tesla. Indeed, Tesla agrees. See Pet. Reply. 7 (arguing only that this claim limitation “at least includes” such an example). And Charge Fusion does not contend otherwise. See PO Resp 15 (arguing only that this limitation “is not just limited to” cost fluctuations). As such, we see no need to further construe this claim limitation. 2. “determine . . . a charging schedule for the vehicle” Limitation 1[g] recites “determine, based at least on the one or more charging preferences and at least one current value of a dynamic attribute of an electric charge provider, a charging schedule for the vehicle.” Independent claim 8, 15, and 22 recite a materially identical limitation. Tesla submits that this limitation should not be construed as a means-plus- function limitation under 35 U.S.C. § 112(6). See Pet. 5. Charge Fusion agrees that “nothing in the claim invokes [§] 112(6).” PO Resp. 16. As such, we discern no dispute regarding the meaning of this claim limitation.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:53–15:8 (emphases added). The Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:3–8. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:49–57 (emphasis added). More specifically, annotated Figure 7 of the ’987 patent, reproduced below, demonstrates how a user may select “amount of charge” in terms of a desired mileage range 720 or a percentage level 718. See Pet. Reply 2. As shown in red, annotated Figure 7 illustrates that a user selects “desired charge level 720” on “vehicle charge indicator 714” by moving a slider to a value specified in “miles” (e.g., 110 miles). The Specification, after discussing selecting a desired charge percent level 718, explains: The user may also or alternatively view and/or change the desired charge range level 720. An estimate of how far the vehicle can travel on a given charge amount (which may be a general average and/or may be computed based on a specific itinerary and/or past driving habits) can be determined, for example, and utilized to express the desired charge level in terms of distance capable of being traveled. In such a manner, for example, a user may determine a desired distance to travel (e.g., how far it is from home to work or vice versa) and may set the desired charge range level 720 to match the desired distance. Ex. 1001, 14:65–15:8. Thus, the Specification confirms that “amount of charge” may be expressed in terms of a desired mileage as well as a desired percentage level.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree. Charge Fusion’s reliance on Wonderland is misplaced and does not support the proposition for which it is cited. In Wonderland, the district court denied the accused infringer’s motion for summary judgment of invalidity, in part, because genuine issues of material fact existed as to whether there was sufficient motivation to combine the prior art. Wonderland, 988 F. Supp. 2d at 511. As such, the district court’s Wonderland decision does not constitute a final ruling on the motivation to combine issue, and the Federal Circuit’s summary affirmance of the district court’s ruling neither addresses the issue nor reflects how the issue was resolved at trial. See Wonderland NurseryGoods Co. v. Thorley Indus., LLC, 644 F. App’x 1011 (Fed. Cir. 2016). Moreover, contrary to Charge Fusion’s assertion, Tesla correctly notes that although Ferro refers to wireless charging, it provides no implementation details. Ex. 1004 ¶ 36; Ex. 2006, 54:8–55:9. Nonetheless, Ferro does describe manual options for initiating charging, and Tesla’s expert credibly testifies that one of ordinary skill in the art would have been motivated to apply Oyobe’s vehicle sensor to allow a user to initiate Ferro’s charging methods more easily without having to leave the vehicle. See Ex. 1003 ¶¶ 146, 151, 152 (citing Ex. 1004 ¶ 109). Accordingly, we find that Tesla establishes that one of ordinary skill in the art would have been motivated to incorporate Oyobe’s use of a sensor to establish presence of a vehicle near a charging station into Ferro’s system.” slip op. at 17

  Patent outcomesUS 11,631,987 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,631,987
• Tesla, Inc. v. Charge Fusion Technologies, LLCAll claims unpatentable
  PTAB · Jul 13, 2026 · IPR2025-00152 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–17 are unpatentable as obvious: claims 1–4, 6–9, and 11–14 over Sutardja, Donnelly, and Letendre; claims 5, 10, and 15 with Seelig; claims 16 and 17 with Knockeart.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of one of ordinary skill in the art at the time of the invention. Tesla submits that one of ordinary skill in the art would have had at least a bachelor’s degree in electrical or mechanical engineering (or an equivalent field) and at least two years of work experience involving automotive systems, including electric vehicle power management. . . . Additional industry experience or technical training may offset less formal education, 1 US 2008/0136371 A1, pub. Jun. 12, 2008 (Ex. 1011, “Sutardja”). 2 US 7,124,691 B2, iss. Oct. 24, 2006 (Ex. 1006, “Donnelly”). 3 Steven E. Letendre, The V2G Concept: A New Model for Power? PUBLIC UTILITIES FORTNIGHTLY, Feb. 15, 2002, at 16 (Ex. 1007, “Letendre”). 4 US 5,654,621, iss. Aug. 5, 1997 (Ex. 1078, “Seelig”). 5 US 6,622,083 B1, iss. Sep. 16, 2003 (Ex. 1010, “Knockeart”). while advanced degrees or additional formal education may offset lesser levels of industry experience. Pet. 2–3 (citing Ex. 1003 ¶ 29). Charge Fusion “takes no position with respect to Petitioner’s proposed level of ordinary skill in the art.” PO Resp. 9. For purposes of our analysis, we apply Tesla’s proposed level of ordinary skill, which we find to be consistent with the problems addressed in the ’788 patent and the prior art. B. Claim Interpretation” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “shown in Figure 7 of the ’788 patent. Pet. 4–5. Charge Fusion responds that Tesla’s proposed construction should be rejected because it “wrongly import[s] embodiments from the specification.” PO Resp. 14–16. We discern no dispute over the meaning of “unitary vehicle charge indicator” because, contrary to what Charge Fusion argues, Tesla does not contend that this limitation is “required to be limited to” the bar graph embodiment of Figure 7, only that it “at least includes” that embodiment. Compare Pet. 5, with PO Resp. 14–16. Tesla also argues that the “first” and “second” portions of the unitary vehicle charge indicator—which indicate the charged and uncharged capacities of the battery—recite merely “communicative content,” and thus, are “not entitled to any patentable weight” because they are directed to nonfunctional printed matter. Pet. 5–7 (citing various case law). At the same time, however, Tesla maintains that “[r]egardless, Donnelly teaches a bar graph indicating the amount of charge and uncharged capacity.” Pet. Reply 11–12 (citing Pet. 33–34); see also Hrg. Tr. 74:22–25, 75:9–11. For reasons expressed below, we agree that Tesla persuasively demonstrates that the asserted combination teaches the “unitary vehicle charge indicator element” as claimed and construed by Charge Fusion. Accordingly, we need not decide the printed matter issue.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “Initially, we note that, as claimed, there is no express restriction on the manner in which the “amount” or “charge” is specified or otherwise expressed. Indeed, the Specification uses both “desired charge percent level” and “desired charge range level” as alternative ways for a user to specify an “amount of charge.” Ex. 1001, 14:63–15:18 (emphases added). In particular, the Specification defines “desired charge range level” as meaning “a desired distance to travel.” Id. at 15:8–18. Elsewhere, the Specification describes that a user may specify the amount of charge as follows: “the user may indicate a desired charging level (and/or a desired charging level may be automatically calculated) based on a desired distance of travel.” Id. at 19:59–67 (emphasis added).” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “full charge” for the battery, and thus, Tesla fails to explain how the combination of Sutardja with Donnelly’s battery bar graph image “would allow a user to select a specific amount of charge or how this would result in a unitary vehicle charge indicator,” as claimed. PO Resp. 30. According to Charge Fusion, “[l]imiting the single option of ‘full charge’ as described in Sutardja would defeat the purpose of implementing a slider” as taught by Donnelly. Id. (citing Ex. 2008 ¶ 72). We disagree. Charge Fusion’s argument rests on the mistaken premise that Sutardja only contemplates selecting a full amount of charge for the battery and not an amount below a full charge, i.e., a partial charge. But that is not what Sutardja says. More accurately, Sutardja teaches that the user specifies the amount of charge—"The user interface module 108 may comprise a key pad, a display, a microphone, and/or a speaker (all not shown). A user of the vehicle 102-1 may use the user interface module 108 to set charging parameters for charging the battery 14.” Ex. 1011 ¶ 243. Elsewhere, Sutardja teaches that the user may set a “predetermined level” of charge— The charge monitoring module 150 may inform the control module 112 when the battery 14 is charged to a predetermined level (e.g., full charge) that may be indicated in the charging parameters. Subsequently, the charge monitoring module 150 may stop charging the battery 14 by deactivating the converter 156 and the charging module 152. The power meter 24 may measure the amount of power received from the utility company 23 during the charging operation. Id. ¶ 270 (emphases added). Although that passage indicates that a “full charge” is an example of a “predetermined level” of charge, nowhere does it exclude the selection of a lesser amount. Indeed, the passage contemplates the ability to “stop charging the battery,” which indicates that selection of the predetermined level may be less than a full charge. Id. Thus, we are not persuaded by Charge Fusion’s argument to the contrary. Rather, in our view, Tesla demonstrates by a preponderance of the evidence that the Sutardja-Donnelly combination teaches a “unitary vehicle charge indicator” that includes at least “first” and “second” portions and that one of ordinary skill in the art would have had reason to successfully combine their respective teachings in a manner that allows a user to predetermine, i.e., specify, an amount of charge. slip op. at 17

  Patent outcomesUS 11,990,788 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,990,788

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.