• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• BMW Of North America, LLC v. Foras Technologies Ltd.No claims unpatentable
  PTAB · Mar 5, 2026 · IPR2024-01347 · APJ Russell E Cass · IPR · Final written decision

  Claims 1–27 were not shown unpatentable because the asserted combinations did not teach switching the boot-processor role to a spare processor.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art The level of skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). “This reference point prevents . . . factfinders from using their own insight or, worse yet, hindsight, to gauge obviousness.” Id.” slip op. at 17

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “processor” to the spare processor, we determine that the claim is describing this transfer of identification of “boot processor,” which is required when transferring a boot processor’s functions to a spare because of the “problems [that] arise in attempting to idle (or eject) the boot processor.” Id. at 6:25– 27. This is confirmed by the language of limitation [1d], stating that the switching of the role of boot processor involves “changing a system identifier of the spare processor to that of the boot processor.” Thus, the firmware and operating system exchange this information identifying the boot processor, which is described in the specification as a device tree. See, e.g., id. at 13:21–35. The ’302 patent makes clear that accurate identification of which processor is the boot processor remains critical during runtime. See, e.g., id. at 6:25–27. Thus, Patent Owner is correct in requiring the system to have a way to identify the boot processor and to transfer this identification during runtime. However, as made clear in the embodiments described in the ’302 patent discussed above, this identification is for runtime purposes to accommodate runtime problems, not for booting purposes. Although Patent Owner may be correct that a function of the boot processor is to boot the system (PO Sur-reply 5), the problem identified in the ’302 patent is a problem relating to the runtime reassignment of the boot processor identity, to address a runtime need to identify the boot processor. See, e.g., Ex. 1001, 11:6–9. Accordingly, based on our analysis of the claims and specification, we determine that “switching the role of boot processor to a spare processor without shutting down the system’s operating system” means causing the system to identify the spare processor as the boot processor (e.g., in a device tree), which then causes the spare processor to appear as the boot processor to the system during runtime. Ex. 1001, 6:25–41, 11:4–18 (describing why boot processors are treated differently even after the boot process has completed); compare id. at 9:65–11:3 (process for recovering from loss of lockstep of a non-boot processor without using a spare), with id. at 11:4–43 (process for recovering from loss of lockstep of a boot processor using a spare because boot processors, during runtime, need special treatment); see also 14:66–15:21 (emphasizing that spares are only needed for recovering boot processors). We construe switching a “role of boot processor” to mean transferring an identification in the system of which processor is the boot processor. This construction comports with the embodiments described in the specification. We do not adopt an additional requirement that this procedure also requires designating which processor will boot the system in the next reboot, which is not disclosed in the specification.” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “may swap processors that are failing, and perform the necessary bookkeeping to keep the operating system informed as to how to address the processors available, nothing in the Petition persuasively explains whether this generic processor swapping switches the boot processor role. As we explained in our claim construction section, the term “boot processor” is not merely a label of convenience to describe the processor that happened to have earlier booted the system. The role of boot processor is specifically switched to the spare; it is a piece of information tracked by the system. As we explain below, Petitioner does not adequately address the transfer of this information to make the system aware of which processor has the boot processor role. Petitioner asserts that “the BSP flag” of the IA-32 system is used to “determine whether a processor is the boot processor.” Pet. 17–18. Petitioner here is relying on a register used in IA-32 processors to identify whether or not they are the boot processor. This register is used during booting so that only the boot processor boots the system. See, e.g., Ex. 1008, 238–40, 710. This register does not appear to serve any further role, and Petitioner offers no persuasive evidence or argument that the processor register flag is exposed or copied to the operating system or APIC table. Petitioner’s proposed combination does not involve updating this register, nor does Petitioner explain how, even if the register were updated, it would meet the “switching” a “role of boot processor” in limitation [1d].” slip op. at 32

  • ExcludeOther

    “The USPTO has established Rules for objecting to and challenging evidence. 37 C.F.R. § 42.64. This process sets various timeframes and permits briefing and curative actions, all of which are designed to crystallize 5 We follow the parties’ convention of citing to the later-added “Page X of Y” pagination rather than the native pagination. the issues and ensure a full and fair opportunity for the parties to be heard. See id. In this instance, Patent Owner’s evidentiary arguments regarding Exhibits 1008 and 1028 are untimely. Accordingly, we will not exclude Exhibits 1008 or 1028 on the basis of their authenticity, admissibility, or for any reason that should have been raised under the proper procedures. See, e.g., PO Resp. 7–8; PO Sur-reply 7–8; see also Pet. Reply 11 (asserting that “Patent Owner has not filed any objection to or a motion to exclude these references”). We consider Petitioner’s citations to these documents in our prior art analysis below. Notwithstanding, as is clear from our patentability analysis below, Exhibits 1008 and 1028 do not serve to demonstrate the unpatentability of any claim.” slip op. at 26

  Patent outcomesUS 7,624,302 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,624,302
• BMW Of North America, LLC v. Foras Technologies Ltd.No claims unpatentable
  PTAB · Mar 5, 2026 · IPR2024-01346 · APJ Russell E Cass · IPR · Final written decision

  Claims 1–30 were not shown unpatentable because the prior-art combinations did not establish transfer of the role of boot processor during system runtime.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for patent owner

    “Patent Owner asserts that: A person of ordinary skill in the art in the field of the ’781 patent would have been a person with at least a bachelor’s degree in Electrical Engineering, Computer Engineering, or equivalent, and at least two years of prior work experience with computer architecture, including experience relating to fault tolerant computer architecture, as of the earliest priority date of the ’781 patent—October 25, 2004. If a person did not have a bachelor’s degree, additional relevant and practical experience with fault tolerant computer systems could provide an acceptable substitute. Likewise, further education beyond a bachelor’s degree could compensate for a deficiency in practical experience. See EX2004, Declaration of Nigel A. Jones (“Jones”), ¶ 26. PO Resp. 3. Patent Owner further notes that its position is “similar, but not identical to, Petitioner’s [position]” but that “the analysis [of the claims] is identical for both proposed determinations.” Id. We agree that our analysis would not differ based on choosing one proposed level of skill over the other, but as the losing party, we select Petitioner’s proposed level of skill.” slip op. at 20

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Accordingly, based on our analysis of the claims and specification, we determine that “logic . . . for transferring, during system runtime, the role of boot processor” means logic that causes the system to identify the spare processor as the boot processor (e.g., in a device tree) which then causes the spare processor to appear as the boot processor to the system during runtime. Ex. 1001, 5:39–55, 10:43–67 (describing why boot processors are treated differently even after the boot process has completed); compare id. at 9:37– 10:42 (process for recovering from loss of lockstep of a non-boot processor without using a spare), with id. at 10:43–11:42 (process for recovering from loss of lockstep of a boot processor using a spare because boot processors, during runtime, need special treatment); see also 15:21–42 (emphasizing that spares are only needed for recovering boot processors). We construe transferring a “role of boot processor” to mean transferring an identification in the system of which processor is the boot processor. This construction comports with the embodiments described in the specification. We do not adopt an additional requirement that this procedure also requires designating which processor will boot the system in the next reboot, which is not disclosed in the specification.” slip op. at 26

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Based on the clear support in the specification for the above interpretation, we see no need to resort to extrinsic evidence. Seabed Geosolutions (US) Inc. v. Magseis FF LLC, 8 F.4th 1285, 1287 (Fed. Cir. 2021) (“If the meaning of a claim term is clear from the intrinsic evidence, there is no reason to resort to extrinsic evidence.”) (citing Profectus Tech. LLC v. Huawei Techs. Co., 823 F.3d 1375, 1380 (Fed. Cir. 2016) (“Extrinsic evidence may not be used ‘to contradict claim meaning that is unambiguous in light of the intrinsic evidence.’” (quoting Phillips, 415 F.3d at 1324)). In general, the cited portions of testimony from the declarants from both parties in the briefs do little more than point to the portions of the ’781 patent described above or argue about what a boot processor does during booting. See, e.g., Pet. Reply 2–8. The specification makes clear that it is focused on the role of boot processor during runtime because of problems encountered during runtime; it is not focused on the boot processor during booting. Ex. 1001, 5:39–55, 10:43–67. Thus, the testimony about what a boot processor does during booting, or that the primary function of the boot processor is to boot, is not particularly pertinent, and does not undo the unambiguous discussion in the ’781 patent.” slip op. at 27

  • BurdenDecided for patent owner

    “whether they are the boot processor or not (Ex. 1008, 238, 710), Petitioner does not explain how such information is exposed to the BIOS or operating system, nor how it is changed during runtime, after its purpose has been fulfilled. In sum, even if Petitioner’s proposed combination swaps the spare processor for the processor that booted the system, Petitioner’s proposed combination does not appear to transfer the role of boot processor to the spare processor. At best, Petitioner’s proposed combination transfers the tasks of one processor to another. See Ex. 1005 ¶¶ 15 (Fox describing its disclosure as “updat[ing] the ‘active’ processor list” and “[re-]allocat[ing] the threads that were running on the failing processor”), 46 (transferring “processes (instructions, threads, etc.) initially allocated to the failing processor” to the spare processor)). Of the art of record, we are only aware of the ’781 patent transferring a designation of which processor is the boot processor during the swap to a spare processor. See, e.g., Ex. 1001, 10:43– 55, 11:10–12, 16:19–21, 17:51–55; claims 1, 9, 16, 25. In conclusion, we find that Petitioner has not shown, by a preponderance of the evidence, how the prior art teaches “transferring” a “role of boot processor” as required by limitation 1[c].” slip op. at 40

  Patent outcomesUS 7,627,781 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,627,781
• Cisco Systems, Inc. v. Lionra Technologies LimitedAll claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01281 · APJ Steven M Amundson · IPR · Final written decision

  Claims 1–3, 5–10, 12–15, and 17–21 are unpatentable as obvious over Cornett, Paatela, and Nelson; claim 8 is also unpatentable with Russell.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “been motivated to combine the teachings of Cornett, Paatela, Nelson, and Russell in the way Petitioner proposes and would have had a reasonable expectation of success. See supra §§ III.E.2(a)–(b). Hence, Petitioner has shown by a preponderance of the evidence that claim 8 is unpatentable under § 103(a) because the claim would have been obvious over Cornett, Paatela, Nelson, and Russell.” slip op. at 122

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art” slip op. at 13

  Patent outcomesUS 7,738,471 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,738,471
• Apple Inc. v. Smith Interface Technologies, LLCNo claims unpatentable
  PTAB · Feb 24, 2026 · IPR2024-01256 · APJ Miriam L Quinn · IPR · Final written decision

  Claims 1–6, 10–14, 16, and 17 were not shown unpatentable because Ahn and Chaudhri did not teach or suggest the claimed movement of an object during the gesture.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “interface objects and, more specifically, the display of user interfaces on applications, in accordance with contacts on the touch-sensitive surface of a display. Ex. 1001, (54), Abstr. Consistent with the scope of the ’727 patent, we find that the level of skill in the art is reflected in a person having a bachelor’s degree in computer science, computer engineering, electrical engineering, human-computer interaction, or a comparable field and at least two years of professional experience working with graphical user interfaces, human-computer interfaces, or equivalents.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Because there is no dispute as to the scope and meaning of these terms, and for consistency with the Decision on Institution, we apply the meaning of the terms “blur” and “distance magnitude” as stated above where applicable. However, we note that our determination does not hinge on the meaning of these terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (only those terms that are in controversy need be construed, and only to the extent necessary to resolve the controversy) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “it was “known to utilize ‘cues’ to help the user know what gesture to utilize and whether they are correctly performing the gesture (e.g., graphics such as movable images that help the user visualize the correct gesture and how to complete it successfully).” Pet. 40 (citing Ex. 1005, Abstract, ¶¶ 54, 62, 73). This sentence does not cure the deficiency noted above regarding Petitioner’s reliance on Ahn’s graphic shadow moving with a gesture. Chaudhri is relied on for the proposition that, Ahn’s graphic shadow is “[i]ndeed” a movable image known to give a user a visual cue. Id. But no such “cue” is provided in Ahn by the graphical shadow alone, because there is no movement of that object. The Petition does not present argument that a Chaudhri object is the movable object or how any of Chaudhri’s teachings of movable objects would have suggested to modify Ahn “to thereby move” the graphical shadow.” slip op. at 18

  • Strike new argumentNew argument disregardedDecided for patent owner

    “the theory that Ahn’s graphic shadow moves. Reply 3−4. Petitioner interprets the sentences in Ahn we have analyzed above in conjunction with testimony of Dr. Terveen to argue that temporal descriptions in Ahn make it obvious for a person of ordinary skill in the art to drag in the right direction while continuing to press the graphic 1800. Id. (citing Exs. 1004 ¶¶ 117−119, Ex. 1023 ¶ 10). The Petition, however, relies on an Ahn disclosing a moving graphic shadow according to the embodiment of Figure 18(a), as described in paragraph 118. Petitioner now changes its theory of how Ahn’s graphic shadow would move according to paragraph 119, i.e., that although the graphic shadow is merely pressed (in the embodiment shown in Figure 18(b)) it would also be dragged while pressed. Reply 3. Not only is this a shift from the theory Petitioner presents in the Petition, it is not persuasive. As Patent Owner argues, and we agree, there is no cogent explanation for modifying the graphic shadow embodiment of Figure 18(b), especially in light of Ahn’s disclosure that the graphic shadow disappears when pressed and the menu list is displayed as emerging. Sur-reply 2−3. In other words, Petitioner’s new argument does not account for Ahn’s teaching that the objective of the graphic shadow is merely to notify the user of the start of the gesture, and once that start of the gesture is detected (the press on the graphic shadow), paragraph 119 informs us that there is no longer a need for the graphic shadow—it disappears from the display. Ex. 1004 ¶ 119. The Petition does not offer any argument for a theory in which the gesture of paragraph 119 (the press, not a touch and drag operation) results in graphic 1800 disappearing, while also moving during the disappearance. We are mindful that “[i]t is impermissible within the framework of section 103 to pick and choose from any one reference only so much of it as will support a given position to the exclusion of other parts necessary to the full appreciation of what such reference fairly suggests to one skilled in the art.” Bausch & Lomb, Inc. v. Barnes-Hind / Hydrocurve, Inc., 796 F.2d 443, 448 (Fed. Cir. 1986)). Consequently, we determine that Petitioner’s argument in Reply belatedly relying on the different embodiment of paragraph 119 is improper new argument, and that even if considered it is not persuasive.” slip op. at 20

  Patent outcomesUS 11,740,727 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,740,727
• Thermaltake Technology Co., Ltd. / Thermaltake Inc. v. Chien-Hao ChenAll claims unpatentable
  PTAB · Feb 17, 2026 · IPR2024-01230 · APJ Andreas Baltatzis · IPR · Final written decision

  Claims 1–5 are unpatentable; substitute claims 6 and 7 are unpatentable, and the Revised Motion to Amend is denied.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “our Institution Decision comports with the qualifications a person would have needed to understand and implement the teachings of the ’336 patent and the prior art of record. Inst. Dec. 15. Accordingly, we adopt the level of skill discussed in our Institution Decision. C.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Pharms. Inc. v. Amino Chemicals Ltd., 715 F.3d 1363, 1374 (Fed. Cir. 2013)). Accordingly, Patent Owner applies a different definition of “side,” in claim 1’s recitation of “an illumination area on at least two sides of the fan at top of the body,” to that definition used to understand “side[s] of the body,” discussed above. Specifically, Patent Owner argues that Petitioner’s dictionary definition of “side,” including “an area next to something” applies to “an illumination area on at least two sides of the fan at the top of the body.” See id. at 8–9.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Hasegawa, and Huang teaches or suggests the limitations of claim 3, and that one skilled in the art would have been motivated to combine those teachings with a reasonable expectation of success. See Ex. 1004 ¶¶ 136– 140; Ex. 1008, 8:4–15, 3:20–29. Accordingly, we determine that claim 3 would have been obvious over Lai and Huang, or Lai, Hasegawa, and Huang. F.” slip op. at 50

  • 112 supportMotion to amend, deniedDenied

    “c) Conclusion We conclude that Patent Owner's Revised Motion to Amend adds new” slip op. at 90

  Patent outcomesUS 10,690,336 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,690,336
• Apple Inc. v. Smith Interface Technologies, LLCNo claims unpatentable
  PTAB · Feb 10, 2026 · IPR2024-01119 · APJ Sharon Fenick · IPR · Final written decision

  Claims 1, 2, 27, 37, 58, 60-64, 67-79, 186, 187, 189, 191, 192, 197, 199-204, 208-216, 223, 225, and 230 were not proven unpatentable over the asserted combinations.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “Patent Owner “does not agree with all aspects of Petitioner’s proposed level of ordinary skill” but did not propose an alternative definition. PO Resp. 10–11. Patent Owner’s declarant, Dr. Rosenberg, adopted Dr. Terveen’s definition for the purposes of his declaration. Ex. 2018 ¶¶ 32–33. We again adopt the main portion of Dr. Terveen’s definition, and determine that one of ordinary skill in the art would have had “a bachelor’s degree in computer science, computer engineering, human-computer interaction, or a comparable field and at least two years of professional experience working with graphical user interfaces and applications for computers.” This definition is commensurate with the problems and solutions in the ’754 patent and prior art of record and is supported by declarant testimony.” slip op. at 9

  • BurdenNot shown unpatentable

    “Given our determination of how Ahn consistently describes the “touch and drag” gesture and “dragged” to mean the movement of a finger (or other object external to the touch screen), and in the absence of persuasive evidence in the figures or in other portions of Ahn to support the movement or appearance of a menu during a user input gesture, we determine that the present record does not support a conclusion that Ahn teaches or suggests a menu sliding onto a display or appearing during an input gesture such as a touch and drag gesture, as opposed to being displayed after such a gesture is completed.” slip op. at 27

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Given our determination of how Ahn consistently describes the “touch and drag” gesture and “dragged” to mean the movement of a finger (or other object external to the touch screen), and in the absence of persuasive evidence in the figures or in other portions of Ahn to support the movement or appearance of a menu during a user input gesture, we determine that the present record does not support a conclusion that Ahn teaches or suggests a menu sliding onto a display or appearing during an input gesture such as a touch and drag gesture, as opposed to being displayed after such a gesture is completed.” slip op. at 27

  • Expert testimonyDecided for patent owner

    “Petitioner argues that “even under [this] interpretation of Ahn, the only difference between Ahn and the claims is whether the animation occurs in direct correspondence with a user’s dragging gesture or after the dragging gesture is complete – a straightforward design choice if ever there was one.” Pet. Reply 3–4 (citing Ex. 1024, 99:16–108:20; Ex. 1023 ¶ 12). However, as Patent Owner argues (PO Sur-reply 7–8) this argument is presented in Reply and is an improper shift of theory from the Petition. Nevertheless, were we to consider it, we would not find it compelling; Dr. Terveen’s cited testimony repeats this bare statement and is not supported by any evidence or additional explanation. Ex. 1023 ¶ 12; see 37 CFR § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (Aug. 24, 2022) (precedential) (assigning little weight to opinion testimony that “merely repeats” conclusory statements in a brief, without “cit[ing] any additional supporting evidence or provid[ing] any technical reasoning to support [the declarant’s] statement”).” slip op. at 29

  Patent outcomesUS 10,656,754 not shown unpatentable
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,656,754

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.