• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• BMW Of North America, LLC v. Foras Technologies Ltd.No claims unpatentable
  PTAB · Mar 5, 2026 · IPR2024-01347 · APJ Russell E Cass · IPR · Final written decision

  Claims 1–27 were not shown unpatentable because the asserted combinations did not teach switching the boot-processor role to a spare processor.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art The level of skill in the art is “a prism or lens” through which we view the prior art and the claimed invention. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). “This reference point prevents . . . factfinders from using their own insight or, worse yet, hindsight, to gauge obviousness.” Id.” slip op. at 17

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “processor” to the spare processor, we determine that the claim is describing this transfer of identification of “boot processor,” which is required when transferring a boot processor’s functions to a spare because of the “problems [that] arise in attempting to idle (or eject) the boot processor.” Id. at 6:25– 27. This is confirmed by the language of limitation [1d], stating that the switching of the role of boot processor involves “changing a system identifier of the spare processor to that of the boot processor.” Thus, the firmware and operating system exchange this information identifying the boot processor, which is described in the specification as a device tree. See, e.g., id. at 13:21–35. The ’302 patent makes clear that accurate identification of which processor is the boot processor remains critical during runtime. See, e.g., id. at 6:25–27. Thus, Patent Owner is correct in requiring the system to have a way to identify the boot processor and to transfer this identification during runtime. However, as made clear in the embodiments described in the ’302 patent discussed above, this identification is for runtime purposes to accommodate runtime problems, not for booting purposes. Although Patent Owner may be correct that a function of the boot processor is to boot the system (PO Sur-reply 5), the problem identified in the ’302 patent is a problem relating to the runtime reassignment of the boot processor identity, to address a runtime need to identify the boot processor. See, e.g., Ex. 1001, 11:6–9. Accordingly, based on our analysis of the claims and specification, we determine that “switching the role of boot processor to a spare processor without shutting down the system’s operating system” means causing the system to identify the spare processor as the boot processor (e.g., in a device tree), which then causes the spare processor to appear as the boot processor to the system during runtime. Ex. 1001, 6:25–41, 11:4–18 (describing why boot processors are treated differently even after the boot process has completed); compare id. at 9:65–11:3 (process for recovering from loss of lockstep of a non-boot processor without using a spare), with id. at 11:4–43 (process for recovering from loss of lockstep of a boot processor using a spare because boot processors, during runtime, need special treatment); see also 14:66–15:21 (emphasizing that spares are only needed for recovering boot processors). We construe switching a “role of boot processor” to mean transferring an identification in the system of which processor is the boot processor. This construction comports with the embodiments described in the specification. We do not adopt an additional requirement that this procedure also requires designating which processor will boot the system in the next reboot, which is not disclosed in the specification.” slip op. at 24

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “may swap processors that are failing, and perform the necessary bookkeeping to keep the operating system informed as to how to address the processors available, nothing in the Petition persuasively explains whether this generic processor swapping switches the boot processor role. As we explained in our claim construction section, the term “boot processor” is not merely a label of convenience to describe the processor that happened to have earlier booted the system. The role of boot processor is specifically switched to the spare; it is a piece of information tracked by the system. As we explain below, Petitioner does not adequately address the transfer of this information to make the system aware of which processor has the boot processor role. Petitioner asserts that “the BSP flag” of the IA-32 system is used to “determine whether a processor is the boot processor.” Pet. 17–18. Petitioner here is relying on a register used in IA-32 processors to identify whether or not they are the boot processor. This register is used during booting so that only the boot processor boots the system. See, e.g., Ex. 1008, 238–40, 710. This register does not appear to serve any further role, and Petitioner offers no persuasive evidence or argument that the processor register flag is exposed or copied to the operating system or APIC table. Petitioner’s proposed combination does not involve updating this register, nor does Petitioner explain how, even if the register were updated, it would meet the “switching” a “role of boot processor” in limitation [1d].” slip op. at 32

  • ExcludeOther

    “The USPTO has established Rules for objecting to and challenging evidence. 37 C.F.R. § 42.64. This process sets various timeframes and permits briefing and curative actions, all of which are designed to crystallize 5 We follow the parties’ convention of citing to the later-added “Page X of Y” pagination rather than the native pagination. the issues and ensure a full and fair opportunity for the parties to be heard. See id. In this instance, Patent Owner’s evidentiary arguments regarding Exhibits 1008 and 1028 are untimely. Accordingly, we will not exclude Exhibits 1008 or 1028 on the basis of their authenticity, admissibility, or for any reason that should have been raised under the proper procedures. See, e.g., PO Resp. 7–8; PO Sur-reply 7–8; see also Pet. Reply 11 (asserting that “Patent Owner has not filed any objection to or a motion to exclude these references”). We consider Petitioner’s citations to these documents in our prior art analysis below. Notwithstanding, as is clear from our patentability analysis below, Exhibits 1008 and 1028 do not serve to demonstrate the unpatentability of any claim.” slip op. at 26

  Patent outcomesUS 7,624,302 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,624,302
• BMW Of North America, LLC v. Foras Technologies Ltd.No claims unpatentable
  PTAB · Mar 5, 2026 · IPR2024-01346 · APJ Russell E Cass · IPR · Final written decision

  Claims 1–30 were not shown unpatentable because the prior-art combinations did not establish transfer of the role of boot processor during system runtime.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for patent owner

    “Patent Owner asserts that: A person of ordinary skill in the art in the field of the ’781 patent would have been a person with at least a bachelor’s degree in Electrical Engineering, Computer Engineering, or equivalent, and at least two years of prior work experience with computer architecture, including experience relating to fault tolerant computer architecture, as of the earliest priority date of the ’781 patent—October 25, 2004. If a person did not have a bachelor’s degree, additional relevant and practical experience with fault tolerant computer systems could provide an acceptable substitute. Likewise, further education beyond a bachelor’s degree could compensate for a deficiency in practical experience. See EX2004, Declaration of Nigel A. Jones (“Jones”), ¶ 26. PO Resp. 3. Patent Owner further notes that its position is “similar, but not identical to, Petitioner’s [position]” but that “the analysis [of the claims] is identical for both proposed determinations.” Id. We agree that our analysis would not differ based on choosing one proposed level of skill over the other, but as the losing party, we select Petitioner’s proposed level of skill.” slip op. at 20

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Accordingly, based on our analysis of the claims and specification, we determine that “logic . . . for transferring, during system runtime, the role of boot processor” means logic that causes the system to identify the spare processor as the boot processor (e.g., in a device tree) which then causes the spare processor to appear as the boot processor to the system during runtime. Ex. 1001, 5:39–55, 10:43–67 (describing why boot processors are treated differently even after the boot process has completed); compare id. at 9:37– 10:42 (process for recovering from loss of lockstep of a non-boot processor without using a spare), with id. at 10:43–11:42 (process for recovering from loss of lockstep of a boot processor using a spare because boot processors, during runtime, need special treatment); see also 15:21–42 (emphasizing that spares are only needed for recovering boot processors). We construe transferring a “role of boot processor” to mean transferring an identification in the system of which processor is the boot processor. This construction comports with the embodiments described in the specification. We do not adopt an additional requirement that this procedure also requires designating which processor will boot the system in the next reboot, which is not disclosed in the specification.” slip op. at 26

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Based on the clear support in the specification for the above interpretation, we see no need to resort to extrinsic evidence. Seabed Geosolutions (US) Inc. v. Magseis FF LLC, 8 F.4th 1285, 1287 (Fed. Cir. 2021) (“If the meaning of a claim term is clear from the intrinsic evidence, there is no reason to resort to extrinsic evidence.”) (citing Profectus Tech. LLC v. Huawei Techs. Co., 823 F.3d 1375, 1380 (Fed. Cir. 2016) (“Extrinsic evidence may not be used ‘to contradict claim meaning that is unambiguous in light of the intrinsic evidence.’” (quoting Phillips, 415 F.3d at 1324)). In general, the cited portions of testimony from the declarants from both parties in the briefs do little more than point to the portions of the ’781 patent described above or argue about what a boot processor does during booting. See, e.g., Pet. Reply 2–8. The specification makes clear that it is focused on the role of boot processor during runtime because of problems encountered during runtime; it is not focused on the boot processor during booting. Ex. 1001, 5:39–55, 10:43–67. Thus, the testimony about what a boot processor does during booting, or that the primary function of the boot processor is to boot, is not particularly pertinent, and does not undo the unambiguous discussion in the ’781 patent.” slip op. at 27

  • BurdenDecided for patent owner

    “whether they are the boot processor or not (Ex. 1008, 238, 710), Petitioner does not explain how such information is exposed to the BIOS or operating system, nor how it is changed during runtime, after its purpose has been fulfilled. In sum, even if Petitioner’s proposed combination swaps the spare processor for the processor that booted the system, Petitioner’s proposed combination does not appear to transfer the role of boot processor to the spare processor. At best, Petitioner’s proposed combination transfers the tasks of one processor to another. See Ex. 1005 ¶¶ 15 (Fox describing its disclosure as “updat[ing] the ‘active’ processor list” and “[re-]allocat[ing] the threads that were running on the failing processor”), 46 (transferring “processes (instructions, threads, etc.) initially allocated to the failing processor” to the spare processor)). Of the art of record, we are only aware of the ’781 patent transferring a designation of which processor is the boot processor during the swap to a spare processor. See, e.g., Ex. 1001, 10:43– 55, 11:10–12, 16:19–21, 17:51–55; claims 1, 9, 16, 25. In conclusion, we find that Petitioner has not shown, by a preponderance of the evidence, how the prior art teaches “transferring” a “role of boot processor” as required by limitation 1[c].” slip op. at 40

  Patent outcomesUS 7,627,781 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,627,781
• Qualcomm Incorporated v. Cobblestone Wireless, LLCSome claims unpatentable
  PTAB · Mar 5, 2026 · IPR2024-01336 · APJ Russell E Cass · IPR · Final written decision

  Claims 1–4, 6–9, 24, and 25 are unpatentable; claims 10, 13, 14, 17, and 21–23 were not shown unpatentable, principally due to missing limitations or insufficient motivation to combine.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “information” should be given its plain and ordinary meaning as “data,” and that Patent Owner’s narrower construction of “first information” and “second information” lacks sufficient support in the intrinsic record. We agree with Petitioner that the ’802 patent Specification defines “information” as data when it uses the phrase “information (i.e., data).” See Ex. 1001, 5:60–62 (“Information (i.e., data) to be transmitted may be received in a baseband digital system 250, such as a wireless digital baseband processor.” (emphasis added)), 11:30–32 (“In this example, the signals 911 and 912 carry the same information (data).” (emphasis added)). As the Federal Circuit has explained, a “specification’s use of ‘i.e.’ signals an intent to define the word to which it refers.” Edwards Lifesciences LLC v. Cook Inc., 582 F.3d 1322, 1334 (Fed. Cir. 2009). slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “argument based on Fernandez alone, we find that Petitioner has not provided a sufficient evidentiary basis to support a motivation to remove the amplification from each of Fernandez’s signal generators 10A-10E and add a single power amplifier instead. See Pet. 76–77 Ex. 1003 ¶ 235. Petitioner’s only rationale for this modification to Fernandez is that “[a] single amplifier has several advantages compared to multiple amplifiers, including lower complexity, a single (vs. multiple) potential point of failure, and lower cost,” and that one of ordinary skill “would have found a single amplifier to be a simple matter of design preference.” Pet. 76–77. Dr. Almeroth simply repeats these cursory allegations without providing any further explanation or evidentiary support. Ex. 1003 ¶ 235. Moreover, Dr. Cooklev provides credible testimony that replacing Fernandez’s amplification in signal generators 10A–10E with a single amplifier would not necessarily have the advantages that Petitioner suggests. See Ex. 2013 ¶¶ 99, 104–105. For example, Dr. Cooklev testifies that a single amplifier would need to have a wider bandwidth than the multiple amplifiers used in Fernandez, which could cause potential stability issues. Id. ¶ 105. According to Dr. Cooklev, this wider bandwidth would require more circuit elements, and thus would not provide the reduction in space usage and power consumption that Petitioner asserts. Id. According to Dr. Cooklev, Montojo also points to several “substantial, and potentially impractical, drawbacks” of using a single amplifier for multiple signal generators, including power constraints imposed by spectral emission requirements and on-board battery capacity. Id. ¶ 104 (citing Ex. 1006 ¶¶ 7– 8). In light of this testimony, which we find credible, Petitioner has failed to provide sufficient explanation or evidence to support its assertion that one of ordinary skill would have found it obvious to replace the multiple amplifiers in Fernandez’s signal generators with a single amplifier.” slip op. at 65

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “argument based on Fernandez alone, we find that Petitioner has not provided a sufficient evidentiary basis to support a motivation to remove the amplification from each of Fernandez’s signal generators 10A-10E and add a single power amplifier instead. See Pet. 76–77 Ex. 1003 ¶ 235. Petitioner’s only rationale for this modification to Fernandez is that “[a] single amplifier has several advantages compared to multiple amplifiers, including lower complexity, a single (vs. multiple) potential point of failure, and lower cost,” and that one of ordinary skill “would have found a single amplifier to be a simple matter of design preference.” Pet. 76–77. Dr. Almeroth simply repeats these cursory allegations without providing any further explanation or evidentiary support. Ex. 1003 ¶ 235. Moreover, Dr. Cooklev provides credible testimony that replacing Fernandez’s amplification in signal generators 10A–10E with a single amplifier would not necessarily have the advantages that Petitioner suggests. See Ex. 2013 ¶¶ 99, 104–105. For example, Dr. Cooklev testifies that a single amplifier would need to have a wider bandwidth than the multiple amplifiers used in Fernandez, which could cause potential stability issues. Id. ¶ 105. According to Dr. Cooklev, this wider bandwidth would require more circuit elements, and thus would not provide the reduction in space usage and power consumption that Petitioner asserts. Id. According to Dr. Cooklev, Montojo also points to several “substantial, and potentially impractical, drawbacks” of using a single amplifier for multiple signal generators, including power constraints imposed by spectral emission requirements and on-board battery capacity. Id. ¶ 104 (citing Ex. 1006 ¶¶ 7– 8). In light of this testimony, which we find credible, Petitioner has failed to provide sufficient explanation or evidence to support its assertion that one of ordinary skill would have found it obvious to replace the multiple amplifiers in Fernandez’s signal generators with a single amplifier.” slip op. at 65

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedOther

    “We find credible and agree with Dr. Cooklev’s testimony that the predistortion signals from tables 17-1 and 17-2 “are cancelled out by Suzuki’s amplifier” 28. Ex. 2013 ¶ 50. Dr. Cooklev supports his opinion by referring to paragraph 1 of Suzuki, which states that Suzuki’s invention is directed to “a multi-band lookup table type predistorter” (such as the one implemented using lookup tables 17-1 and 17-2 in Figure 6) that “compensates for a distortion of a power amplifier.” Ex. 2013 ¶ 54; Ex. 1004 ¶ 1. Dr. Cooklev’s opinion is also supported by paragraph 3 of Suzuki, which explains that a conventional digital predistorter uses a lookup table “for linearizing non-linear characteristics of an amplifier.” Ex. 1004 ¶ 3; Ex. 2013 ¶ 54. Dr. Cooklev further supports his opinion by relying on Suzuki’s disclosure in paragraph 46 that power amplifier 28 is “subject to distortion compensation” by the predistorter, and that distortion components in the signal output by the amplifier are canceled by “distortion compensation data [that] are read out from the lookup tables 17-1 and 17-2 and provided to the adders 13-1 and 13-2, respectively.” Ex. 1004 ¶ 46; Ex. 2013 ¶ 54. And, Dr. Cooklev’s opinion is supported by Suzuki’s disclosure in paragraph 47 that the distortion compensation added by adders 13-1 and 13-2 add the distortion compensation data from lookup tables 17-1 and 17-2 “to perform distortion compensation (addition of predistortion)” to “signals to be transmitted.” Ex. 1004 ¶ 47; Ex. 2013 ¶ 54. Petitioner agrees that the distortion compensation data from lookup tables 17-1 and 17-2 “are added to the respective frequency band from” input signal ST “in order to predistort the output signal, which is then transmitted,” and does not dispute that the distortion compensation data from lookup tables 17-1 and 17-2 is ultimately cancelled out by the distortion created by amplifier 28. Pet. Reply 8. In light of the above evidence, we agree with Patent Owner that Suzuki’s distortion components from lookup tables 17-1 and 17-2 in Figure 6 (which Petitioner relies on for the first and second digital signals in limitations 10a and 10b) are cancelled out by the distortion created by power amplifier 28 before the signal is ultimately transmitted. We agree with Petitioner that these first and second digital signals include data in the form of distortion compensation data. However, because these signals are cancelled by the distortion from amplifier 28 before transmission, the data from these signals is never transmitted. Thus, the first and second digital signals identified by Petitioner (the distortion compensation data from lookup tables 17-1 and 17-2) do not comprise data “to be transmitted,” as limitations 10a and 10b require.” slip op. at 35

  Patent outcomesUS 7,924,802 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,924,802
• Cisco Systems, Inc. v. Lionra Technologies LimitedAll claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01281 · APJ Steven M Amundson · IPR · Final written decision

  Claims 1–3, 5–10, 12–15, and 17–21 are unpatentable as obvious over Cornett, Paatela, and Nelson; claim 8 is also unpatentable with Russell.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “been motivated to combine the teachings of Cornett, Paatela, Nelson, and Russell in the way Petitioner proposes and would have had a reasonable expectation of success. See supra §§ III.E.2(a)–(b). Hence, Petitioner has shown by a preponderance of the evidence that claim 8 is unpatentable under § 103(a) because the claim would have been obvious over Cornett, Paatela, Nelson, and Russell.” slip op. at 122

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art Factors pertinent to determining the level of ordinary skill in the art” slip op. at 13

  Patent outcomesUS 7,738,471 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,738,471
• Charter Communications, Inc. v. Iarnach Technologies Ltd.Some claims unpatentable
  PTAB · Feb 19, 2026 · IPR2024-01287 · APJ Russell E Cass · IPR · Final written decision

  Claim 5 is unpatentable over Bernstein alone or with Tsuge; claims 1–3 and 6–11 were not shown unpatentable because the asserted grounds fail to teach required limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that an ordinarily skilled artisan at the time of the alleged invention “would have at least a bachelor’s degree in electrical engineering, computer science or comparable degree or 2–3 years industry experience designing and/or maintaining back-end networking equipment.” Pet. 11. In the Preliminary Response, Patent Owner stated that it “does not contest Petitioner’s recitation of the level of skill in the art, because even under Petitioner’s proposed level of skill,” Petitioner “has failed to demonstrate a reasonable likelihood of success.” Prelim. Resp. 17. In the Institution Decision, we adopted Petitioner’s proposed definition of a person of ordinary skill in the art, finding that it was consistent with the ’982 patent and the asserted prior art. Inst. Dec. 14 (citing Okajima, 261 F.3d at 1355).” slip op. at 14

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Following the Institution Decision, both parties submitted proposed claim constructions in the district court stating that the preamble is limiting. Ex. 2009, 3–4 (Petitioner’s Preliminary Claim Construction Chart); Ex. 2010, 7 (Patent Owner’s Preliminary Claim Construction Chart). Patent Owner states in the Patent Owner Response that “[t]he parties now agree that the entire preambles of both claims 1 and 6 are limiting.” PO Resp. 17. In its Reply, Petitioner states that “whether the Board finds the phrase ‘service auto-configuration’” in the preamble to be limiting is “immaterial” because it “does not affect the analysis of whether the prior art cited in the petition invalidates [the challenged] claims.” Pet. Reply 5. At the oral hearing, Petitioner acknowledged that it does not dispute that the entire preamble of claims 1 and 6 is limiting. Tr. 20:25–21:17, 23:15–17. Because the parties agreed in district court that the entire preamble of claims 1 and 6 is limiting, and also agree in this proceeding, we find that the preambles of claims 1 and 6 are limiting for purposes of this Decision. We will discuss the meaning of the preamble further in the sections below applying the prior art to the claims. See §§ III.A..4(a), III.A.7, III.C.1(a), III.C.7, infra.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Based on the record before us, and for purposes of this Decision, we do not need to, and do not, construe any other claim terms to resolve the controversy before us. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Based on the full trial record, we find that Petitioner has failed to meet its burden to show that Bernstein recites a “service auto-configuration” method as recited in the preamble of claim 1. As discussed above, the parties agree that the preamble of claim 1, including the “service auto-configuration method” language, is limiting. See § II.B, supra. As we explained in the Institution Decision, the Petition does not set forth a construction of “service auto-configuration method” or explain how the prior art discloses a “service auto-configuration method.” Pet. 11, 24; Inst. Dec. 32. Instead, the Petition merely explains how Bernstein teaches “a DOCSIS Provisioning of EPON (DPoE) system,” without explaining how it teaches a “service auto-configuration method.” Pet. 24 (citing Ex. 1005 ¶ 59). By failing to offer a construction of “service auto-configuration method” or explain how this limitation is met by the prior art, the Petition fails to show by a preponderance of the evidence that the prior art discloses or suggests this limitation.” slip op. at 34

  Patent outcomesUS 9,287,982 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 9,287,982
• Universal Electronics, Inc. / Gemstar Technology (Qinzhou) Co. Ltd. et al. v. ROKU, Inc.All claims unpatentable
  PTAB · Jan 21, 2026 · IPR2022-00818 · APJ Russell E Cass · IPR · Remand

  On remand, the Board held claim 11 unpatentable under §103 over Wouters and Verzulli because Wouters’s fixer saves the combined codeset for reinstallation.

  RulingsRemand decision

  • RemandOther

    “We agree with Petitioner that the above-quoted paragraph of Wouters teaches “combining . . . correct working codes from the scanned remote control code-sets into a new custom configuration code set” using Wouters’s “fixer,” which combines the codes into a custom codeset, gives it a name, such as “user1,” and stores it in a memory (the “RC code set data base”). See Pet. Reply 2; Ex. 1009, 10:18–20. This custom codeset includes a combination of the working codes previously tested and installed by the user. Ex. 1009, 10:18–20. We also find that the above-quoted paragraph of Wouters teaches “installing . . . the combined correct working codes of the new custom configuration code set for use by the remote control.” Specifically, Wouters teaches that, when the remote control’s batteries die, “the user may easily reinstall the chosen code set by choosing ‘user1’ from the proposed list or immediately selecting ‘user1.’” Ex. 1009, 10:20–22 (emphasis added). This reinstallation is of the combined correct working codes of a new custom configuration codeset previously stored and named by the fixer, such as the “user1” codeset. Id. at 10:20–24. We find that Wouters’s “reinstallation” of the chosen code set (e.g., the “user1” codeset) is an “installation” of that codeset. The claim merely recites “installing” the codeset, and does not distinguish between an initial installation and a re-installation, such as after the batteries of the remote control die. Ex. 1001, 10:45. Patent Owner also does not point to anything in the ’875 patent Specification or the other intrinsic evidence that would limit the “installing” in limitation 11[e] to an initial installation, or that would exclude a re-installation after the remote control’s batteries die. Consequently, we find that Wouters’s reinstallation of the codeset after the batteries die is an “install[ation]” as required by limitation 11[e]. We further agree with Petitioner that the Wouters-Verzulli combination discloses that these operations would be performed using a processor and memory, which Patent Owner does not appear to dispute. FWD 52; Pet. 24–27, 37; PO” slip op. at 20

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “Additionally, the obviousness inquiry typically requires an analysis of “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006) (requiring “articulated reasoning with some rational underpinning to support the legal conclusion of obviousness”)); see In re Warsaw Orthopedic, Inc., 832 F.3d 1327, 1333 (Fed. Cir. 2016) (citing DyStar Textilfarben GmbH & Co. Deutschland KG v. C.H. Patrick Co., 464 F.3d 1356, 1360 (Fed. Cir. 2006)).” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We agree with Petitioner that the above-quoted paragraph of Wouters teaches “combining . . . correct working codes from the scanned remote control code-sets into a new custom configuration code set” using Wouters’s “fixer,” which combines the codes into a custom codeset, gives it a name, such as “user1,” and stores it in a memory (the “RC code set data base”). See Pet. Reply 2; Ex. 1009, 10:18–20. This custom codeset includes a combination of the working codes previously tested and installed by the user. Ex. 1009, 10:18–20. We also find that the above-quoted paragraph of Wouters teaches “installing . . . the combined correct working codes of the new custom configuration code set for use by the remote control.” Specifically, Wouters teaches that, when the remote control’s batteries die, “the user may easily reinstall the chosen code set by choosing ‘user1’ from the proposed list or immediately selecting ‘user1.’” Ex. 1009, 10:20–22 (emphasis added). This reinstallation is of the combined correct working codes of a new custom configuration codeset previously stored and named by the fixer, such as the “user1” codeset. Id. at 10:20–24. We find that Wouters’s “reinstallation” of the chosen code set (e.g., the “user1” codeset) is an “installation” of that codeset. The claim merely recites “installing” the codeset, and does not distinguish between an initial installation and a re-installation, such as after the batteries of the remote control die. Ex. 1001, 10:45. Patent Owner also does not point to anything in the ’875 patent Specification or the other intrinsic evidence that would limit the “installing” in limitation 11[e] to an initial installation, or that would exclude a re-installation after the remote control’s batteries die. Consequently, we find that Wouters’s reinstallation of the codeset after the batteries die is an “install[ation]” as required by limitation 11[e]. We further agree with Petitioner that the Wouters-Verzulli combination discloses that these operations would be performed using a processor and memory, which Patent Owner does not appear to dispute. FWD 52; Pet. 24–27, 37; PO” slip op. at 20

  • Strike new argumentNew argument consideredDecided for petitioner

    “We also find that Petitioner has not forfeited its argument that Wouters’s fixer and reinstallation functionality satisfies limitation 11[e]. The Petition pointed to Wouters’s “fixer” for limitation 11[e], and cited Dr. Houh’s Declaration specifically identifying and quoting Wouters’s disclosure of reinstallation at page 10, lines 14 through 24. Pet. 35 (quoting Ex. 1009, 10:14–20) (citing Ex. 1002 ¶ 167); Ex. 1003 ¶ 167 (quoting Ex. 1009, 10:14–24). We find that a person of ordinary skill in the art reading the Petition and its cited evidence (including paragraph 167 of Dr. Houh’s first Declaration) would be apprised that Petitioner was relying on the portion of Wouters describing the “fixer” and reinstallation functionality.” slip op. at 23

  Patent outcomesUS 8,378,875 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,378,875

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.