• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Intel Corporation v. Advanced Cluster Systems, Inc.All claims unpatentable
  PTAB · Sep 23, 2026 · IPR2025-00915 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1–30 are unpatentable: claims 1–3, 5–16, and 18–30 as obvious over Menon, Trefethen, RS6000, and MPIref; claims 4 and 17 over those references plus POEref.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundTeaching away not foundDecided for petitioner

    “Ex. 1163 ¶ 37 (citing Ex. 1003 ¶ 71; Ex. 1005, 1–3). We credit Dr. Bajaj’s testimony which is unrebutted and supported by the record. We, thus, agree with Dr. Bajaj’s reasoning which is based on Menon. We further agree with Dr. Bajaj’s conclusion that Menon does not teach away from the combination with Trefethen. Id. ¶ 75. Menon’s description of building on and enhancing the teachings of Trefethen—the earlier work of the same research group at Cornell—by adding MEX routines to achieve high-performance parallel computing and extensibility for MATLAB, demonstrates a classic motivation for a POSITA to combine. RS6000 is specifically referenced in Menon-Trefethen and adds operational details of the parallel operating platform that teach a POSITA how to implement the MultiMATLAB system with a reasonable expectation of success. Considering Menon as a whole, these facts are inconsistent with Patent Owner’s teaching away arguments. For these reasons, Patent Owner’s teaching away argument is unavailing. Motivation to Combine Conclusion We have reviewed Petitioner’s evidence and contentions which we” slip op. at 42

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “For the foregoing reasons, Petitioner establishes by a preponderance” slip op. at 79

  Patent outcomesUS 11,563,621 unpatentable
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,563,621
• ARM Ltd v. Daedalus Prime LLCAll claims unpatentable
  PTAB · Sep 9, 2026 · IPR2025-00207 · APJ Gregg I Anderson · IPR · Final written decision

  Claims 1–7, 11–14, and 16–19 are unpatentable as obvious over the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have (1) at least a bachelor’s degree in electrical engineering, computer engineering, physics, or a similar field, and (2) approximately two years of industry or academic experience in a field related to microelectronic architecture design, including experience with cache management in multicore systems-on-a-chip (SoCs). (Ex-1003 ¶¶50-51.) More related education would compensate for fewer years of work experience (and vice versa). (Ex-1003 ¶¶50-51.) Pet. 4–5. This definition was adopted in the Institution Decision. Inst. Dec. 13. Patent Owner does not dispute the finding. PO Resp. 5–6. For the purpose of our Decision, we maintain the finding made in the Institution Decision.” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “1. “a single caching agent” (claim 1) We note a construction issue from the ’1344 IPR where we construed a “single caching agent,” which is recited in claim 1 here. ’1344 IPR Final Decision, 16–18. We concluded that a “‘single caching agent’ means ‘one caching agent for the processor, which may be formed from distributed portions.’” Id. at 18. We adopted that construction in our Institution Decision in this case. Inst. Dec. 15.” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “2. Remaining claim terms Independent claims 11 and 16 include different language as to “caching agent.” Claim 11 recites “a caching agent.” Ex. 1001, 8:18. Claim 16 similarly recites “a first caching agent.” Id. at 8:47–48. Neither claims 11 or 16 includes claim 1’s recitation of “distributed portions. The “caching agent” limitations of claims 11 and 16, are not at issue. Accordingly, no construction is necessary.” slip op. at 18

  • PTAB / AIA Trials › §315(e) estoppelEstoppel appliesDecided for petitioner

    “(1) the issue is identical to one decided in the first action; (2) the issue was actually litigated in the first action; (3) resolution of the issue was essential to a final judgment in the first action; and (4) plaintiff had a full and fair opportunity to litigate the issue in the first action. Pet. Br. 2. Further, Petitioner alleges the ’1344 Final Decision was not appealed by Patent Owner and is therefore a basis for issue preclusion. Id. (citing Power Integrations, Inc. v. Semiconductor Components Indus., LLC, 926 F.3d 1306, 1311–12 (Fed. Cir. 2019)).” slip op. at 19

  Patent outcomesUS 8,984,228 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,984,228
• Intel Corporation v. Advanced Cluster Systems, Inc.All claims unpatentable
  PTAB · Sep 1, 2026 · IPR2025-00914 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious over Menon, Trefethen, RS6000, and POEref.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us that reflects the knowledge and We adopt the Petition’s formulation of the level of ordinary skill in the art, which is consistent with the ’679 patent, the prior art of record, and the testimony of both experts.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The Petition relies on the ordinary and customary meaning of the claim terms consistent with the Phillips standard. Pet. 12–13 (citing 37 C.F.R. § 42.100(b)). The Petition also addresses the construction of “peer-to-peer architecture” recited in independent claim 1 of the ’679 patent, a limitation we need not construe to resolve the parties’ dispute in this proceeding. Id. at 13; see, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Owner relies on the ordinary and customary meaning of the claim terms consistent with the Phillips standard without further analysis. Resp. 7.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “RS6000 with Menon, namely because RS6000 provides an overview of the IBM SP2 multiprocessor and Menon teaches the use of “IBM SP2, a modern high performance distributed memory multiprocessor” used in the MultiMATLAB system. Id. at 24–25 (citing Ex. 1003 ¶¶ 142–145; Ex. 1005, 5–6, 14; Ex. 1007, 1, 11). The Petition also explains why POEref pertains to the field of cluster computing in a parallel operating environment. Id. at 26 (citing Ex.1008, 11 (“PE Software is designed to run on an … RS/6000 network cluster”)); (further citing Ex. 1001, 1:14–15; Ex. 1003 ¶¶ 146–149). The Petition contends that a POSITA would have been motivated to combine the teachings of POEref with Menon “because Menon suggests the combination by teaching that MultiMATLAB uses ‘POE, IBM's Parallel Operating Environment.’” Id. at 26–27 (citing Ex. 1005, 6); (further citing Ex. 1003 ¶¶ 150–153; Ex. 1005, 14; Ex. 1008, 11, 46). We agree with Petitioner’s analysis. We find the Petition’s argument and evidence of a motivation to combine the asserted prior art references in the manner claimed to be compelling, persuasive, consistent with the disclosures in the references, which include internal cross-references to each other, and supported by the expert testimony of Dr. Bajaj.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). Patent Owner argues that Menon teaches away from a combination with Trefethen because “Menon expressly states that Trefethen’s first-generation architecture is inadequate for the objectives that motivated the newer design.” Resp. 35–37. The evidence does not support Patent Owner’s position. First, Patent Owner’s teaching away argument is inconsistent with the strong evidence of a motivation to combine Menon and Trefethen discussed above. Second, Patent Owner’s teaching away argument is contrary to the evidence of record for the reasons given in Petitioner’s Reply. Reply 13–15 (e.g., “Menon explicitly cites Trefethen and explains that Menon builds on the teachings of Trefethen.”) (citing Pet. 22; Ex. 1003 ¶ 70; Ex. 1005, 1–3; Ex. 1163 ¶¶ 47–53). We are further persuaded by Dr. Bajaj’s reply testimony: the “MultiMATLAB teachings in Trefethen. In fact, Menon describes enhancing the system of Trefethen. For example, Menon describes a list of “goals” already achieved by MultiMATLAB and then states that the architecture has been “redesigned to achieve two further goals.” One of these two “further goals” is “extensibility,” which Menon achieves by its description of adding “MEX routines” to the system of Trefethen. Far from showing an “incompatibility” between Menon and Trefethen as the POR argues, Menon’s addition of the “MEX routines” to MultiMATLAB shows that such a modification was within the capabilities of a POSITA, because the authors of the Menon paper actually implemented the modification. Ex. 1163 ¶ 49 (citing Ex. 1005, 1–3). Dr. Bajaj’s testimony is unrebutted, credible, and supported by the record. We agree with Dr. Bajaj’s reasoning, which is based on direct quotes in Menon. We further agree with Dr. Bajaj’s conclusion that Menon does not teach away from the combination with Trefethen. Id. ¶¶ 50–52. Menon’s description of building on and enhancing the teachings of Trefethen—the earlier work of the same research group at Cornell—by adding MEX routines to achieve high-performance parallel computing and extensibility for MATLAB, demonstrates a classic motivation for a POSITA to combine the teachings of Menon and Trefethen. RS6000 and POEref are specifically referenced in Menon-Trefethen and add operational details of the parallel operating platform that teach a POSITA how to implement the MultiMATLAB system with a reasonable expectation of success. Such facts are inconsistent with Patent Owner’s teaching away and lack of motivation arguments.” slip op. at 24

  Patent outcomesUS 12,021,679 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 12,021,679
• Intel Corporation v. Advanced Cluster Systems, Inc.All claims unpatentable
  PTAB · Aug 26, 2026 · IPR2025-00913 · APJ Brian P Murphy · IPR · Final written decision

  Claims 1–30 are unpatentable: claims 1–25, 27–28, and 30 as obvious over Menon, Trefethen, RS6000, and POEref; claims 26 and 29 over those references plus MPIref.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citing Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). “These factors are not exhaustive but are merely a guide to determining the level of ordinary skill in the art.” Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). There is uncontested evidence in the record before us that reflects the knowledge and experience of a POSITA. We adopt the Petition’s formulation of the level of ordinary skill in the art, which is consistent with the ’034 patent, the prior art of record, and the testimony of both experts.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “processor,” “multi-core” processor, or “singular ‘hardware processor’ that ‘comprises’ (or ‘with’) multiple ‘processing cores’” as Patent Owner contends. Resp. 11–12, 21; see also Ex. 1163 ¶ 22 (“The claim does not recite ‘single chip,’ ‘single package,’ ‘single die,’ or ‘single multi-core microprocessor.’”). Nor do the claims recite a plurality of processing cores “within” a single-chip package or read as “multi-core within a processor” as argued by Patent Owner. Resp. 12–14; Sur-Reply 2; see Reply 6 (citing Ex. 1163 ¶ 23 (“Thus, the phrase ‘with a plurality of processing cores’ identifies the required processing resources associated with the hardware processor; it does not import a packaging limitation.”)). The claims do recite a hardware processor “with” a plurality of processing cores; a critical distinction even Patent Owner reads as open-ended, i.e., as a hardware processor that “comprises” a plurality of processing cores. See Resp. 11 (“the claims require a singular ‘hardware processor’ that ‘comprises’ (or ‘with’) multiple ‘processing cores’”). Consequently, the claim language does not support Patent Owner’s proposed construction of “a . . . hardware processor with a plurality of processing cores” as a single multi-core processor. cores it contains” in reliance on a parsed description in the ’034 patent specification: The specification explains: “Each processor can contain one or more processor cores that are capable of single-threaded execution. Processor cores are generally independent microprocessors, but more than one can be included in a single-chip package.” Id. at 1212 (partially quoting Ex. 1001, 5:11–16); Sur-Reply 2. The quoted description does not support Patent Owner’s contention that the claimed “a . . . hardware processor with a plurality of processing cores” must be limited to a “single multi-core processor” that “locates multiple cores within a ‘single-chip package,’” i.e. limited to a single multi-core microprocessor such as “a Core 2 Duo is one processor package with two cores.” Resp. 12– 13, 21 (citing Ex. 1001, 7:15–25). The description quoted above from column 5, moreover, describes a “processor” that “can contain one or more processor cores” each of which can be an independent microprocessor. Reply 2–3 (citing Ex. 1001, 5:11–16; Ex. 1163 ¶¶ 10–14). As Petitioner emphasizes, the specification distinguishes a “processor” from a “microprocessor” and describes a “processor” that “can be one or more general purpose single-core or multi-core microprocessors,” rather than limiting a “processor” to a single multi-core microprocessor. Reply 3–5 (citing Ex. 1001, 7:14–36, Fig. 1; Ex. 1163 ¶¶ 15–18).” slip op. at 13

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “art because they pertain to the same “field of cluster computing” as the ’034 patent and “are reasonably pertinent to the problem of the ’034 patent, namely, executing a single program on multiple nodes.” Pet. 22 (citing Ex. 1001, 1:14–15; Ex. 1003, ¶¶ 65–69; Ex. 1005, 2; Ex. 1006, Abstract). The Petition emphasizes that Menon expressly cites and builds on the MultiMATLAB system taught by Trefethen. Id. (citing Ex. 1003 ¶ 71; Ex. 1005, 1–2). The Petition contends that: combination of prior art elements according to known methods (executing MATLAB code on a multiprocessor system) to yield the predictable result discussed in both papers: the MultiMATLAB system executing MATLAB in parallel to perform mathematical calculations. Id. at 22–23 (citing Ex. 1003 ¶ 70; Ex. 1005, Abstract; Ex. 1006, 2–7). The Petition further contends that a POSITA would have found it predictable to combine Trefethen with Menon with a reasonable expectation of success “because researchers had a strong desire to parallelize MATLAB.” Id. at 23–24 (citing Ex. 1003 ¶ 73; Ex. 1005, 2; Ex. 1006, 11–12.)” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “A POSITA would have had an especially strong reason to read these references together because they address the same project, the same MATLAB-based parallel-computing problem, and the same MultiMATLAB command environment. Menon expressly identifies Trefethen’s MultiMATLAB work and then describes a redesigned architecture that preserves the same user-level objective––parallel MATLAB computations—while improving implementation details and extensibility. A POSITA therefore would not view the references as mutually exclusive alternatives. Rather, a POSITA would understand Trefethen as teaching specific MultiMATLAB commands and examples, including Eval, Send, Recv, and the architecture was implemented and improved in a later version. Ex. 1163 ¶¶ 71–72 (emphases added). We find the above reasoning persuasive and adopt it as our own. Petitioner and Dr. Bajaj demonstrate a sound technical motivation for a POSITA—someone having a bachelor’s degree in computer science, computer engineering, or electrical engineering and two years of experience working in the field of cluster computing or parallel processing—to combine Menon and Trefethen: to improve MATLAB’s operational performance and extensibility in a parallel operating environment. Menon builds on Trefethen to improve and extend the parallel processing capabilities of MultiMATLAB: “This system will enable users to access high-performance parallel routines from within the MATLAB environment, to extend the environment with new parallel routines, and to use these routines to develop parallel applications with the MATLAB language.” Ex. 1005 Abstract. Menon is intended to be read in conjunction with Trefethen, as would be expected from two references generated by the same research group at the same university addressed to the same technical subject matter about a year apart. Ex. 1005, 1; Ex. 1006, Ex. 1086 ¶¶ 65, 101, 102. The very first citation in Menon is to Trefethen. Ex. 1005, 2, 16.” slip op. at 30

  Patent outcomesUS 11,570,034 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,570,034
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Google LLC v. Brodti Inc.All claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00472 · APJ Stephen E Belisle · IPR · Final written decision

  Claims 1–20 are unpatentable as obvious under § 103 over Nicholas, Laidlaw, Mayadas, and Error, with Yasnovsky added for claims 7, 8, 16, 17, and 20.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Petitioner’s and Patent Owner’s definitions for the level of ordinary skill in the art are substantially similar. In light of the record before us, we adopt Patent Owner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’898 patent and the prior art of record, we determine that the definition offered by Patent Owner comports with the qualifications a person would have needed to understand and implement the teachings of the ’898 patent and the prior art, particularly experience pertaining to Internet/web interfaces and web-based media. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). Neither party argues, nor do we determine, that the outcome of our Decision depends on which party’s definition is selected.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “includ[e] a server and one or more webpages that may be provided by the server for display in a web browser.” Pet. Reply 5 (citing Ex. 1026 ¶¶ 13–15). Petitioner argues, and we agree, that the Specification strongly supports this construction (requiring a server and webpage(s)) by describing a “website” as synonymous with a server computer system: “The WWW [(World Wide Web)] service allows a server computer system (i.e., Web server or Web site) to send graphical Web pages or screens of information such as the advertising materials to a remote client computer system 10.” Ex. 1001, 3:66–4:2 (emphases added); see id. at Fig. 1 (depicting a service engine and webpages as a web server, i.e., website), 3:15–18 (describing Figure 1 as showing “a server of the website” (emphasis added)); Pet. Reply 5; see Ex. 1026 ¶ 13. Petitioner also submits a supporting (and persuasive) contemporaneous technical dictionary definition of “website,” which highlights the distinction between a lay person’s understanding of the term versus that of the relevant artisan. Pet. Reply 5–6. This definition explains that the “common but technically inaccurate” usage of “website” is to mean “Web page,” but the technically correct usage of “website” is to mean “one or more computers that are associated with a fully qualified domain name and make content available on the Web.” Id. (citing Ex. 1028, 402). Petitioner’s expert, Dr. Crovella, likewise testifies that “[a] website cannot exist without the server or computer that provides its webpages.” Ex. 1026 ¶ 15; see Ex. 1027, 36:8–20 (Patent Owner’s expert, Dr. Myler, agreeing that “it has to be some machine somewhere that’s providing the webpages for the website.”). The limitations of claim 1 also support Petitioner’s position that “website” includes a server and webpage(s). Reply 5. For example, claim 1 recites advertising material for “populat[ing] on one or more websites,” and selected “advertising buy options comprise at least one website of the respective websites.” Ex. 1001, 10:29–51 (emphases added). We find these limitations make the most technical sense where “website” implicates an Internet domain or domain name, such as brodti.com, which itself is a computer system (server) and associated webpage(s) reached via that domain name. This interpretation aligns with testimony of Patent Owner’s expert, Dr. Myler, in which he states that a “website” describes “a group of webpages at a particular domain (e.g., www.espn.com, www.espn.com/nba, www.espn.com/nfl, www.espn.com/nhl).” Ex. 2009 ¶ 68 (emphasis in italics added). In other words, brodti.com and espn.com are two different websites, with each website having one or more webpages (e.g., www.espn.com/nba, www.espn.com/nfl), and such websites include a server giving life to such webpage(s). slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “Patent Owner proffers that placing advertising material “within” web property content means “inserting” an advertisement into particular content. PO Resp. 12. Petitioner responds that “placing . . . within” means what it says, and notes that “[t]he words ‘insert’ or ‘inserting’ appear nowhere in the [Specification].” Pet. Reply 7–8; see id. at 8 (Petitioner arguing that Patent Owner’s expert “admitted that the claim does not specify details regarding how advertising material needs to be placed within web property content.” (citing Ex. 1027, 29:18–24)). Patent Owner replies that the relevant artisan allegedly “would have understood ‘placing . . . within’ to mean ‘inserting into,’” but then submits that whether “placing . . . within” versus “inserting into” is used does not matter because Petitioner allegedly has not demonstrated the obviousness of either. PO Sur-reply 17. As Petitioner observes, “[i]t is unclear if Patent Owner intended any difference in meaning between these two terms.” Pet. Reply 8. Accordingly, based on the complete record before us, we determine that no further construction of this limitation is needed, and “placing A within B” means what it says—“placing A within B.”” slip op. at 20

  • Expert testimonyPetitioner expert creditedOther

    “determining” of impression validity feature of limitation 1[h] by disclosing “a ‘single-pixel’ image technique for determining that an impression is valid,” e.g., by using “cookies.” Pet. 42–45. Petitioner’s expert, Dr. Crovella, testifies that this “single-pixel” impression tracking technique would have been a “well-known” technique to the relevant artisan, and as described by Error, operates as follows: [A] URL link for a single pixel (or transparent) image file is embedded onto a webpage that is delivered to a web browser. The image is not meant to be viewed and will likely not be visible to the user. After the user’s browser receives the webpage, it uses the embedded URL link to request the single-pixel image from a server. The receipt of that request by the server provides an indication that the user’s web browser actually received and presented the web page to the user. Ex. 1002 ¶ 133 (citing Ex. 1007, 1:36–54, 2:6–21); see id. at ¶¶ 132–139. slip op. at 43

  Patent outcomesUS 11,416,898 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,416,898
• Luxottica Of America, Inc. v. E-Vision Smart Optics, Inc.Adverse judgment
  PTAB · Jun 29, 2026 · IPR2025-01512 · APJ Arthur M Peslak · IPR · Adverse judgment

  The Board granted Patent Owner’s request for adverse judgment, cancelled claims 1–27, and terminated the proceeding.

  RulingsAdverse judgment

  • Adverse judgmentAdverse judgmentGranted

    “A party may request entry of adverse judgment against itself at any time during an inter partes review proceeding. See 37 C.F.R. § 42.73(b). Under these circumstances, entry of judgment adverse to the Patent Owner is appropriate as to claims 1–27 of the ’612 patent. Consequently, we grant Patent Owner's request for adverse judgment.” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
  None
  Patents in suitUS 11,971,612

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.