- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Samsara Inc. v. Motive Technologies, Inc.No claims unpatentablePTAB · Jul 29, 2026 · IPR2025-00574 · APJ Daniel J Galligan · IPR · Final written decision
Claims 1–7 were not shown unpatentable because the asserted combinations did not establish the claimed video overlay and transmission for manual review.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner that Petitioner’s contentions in this ground do not cure the issues for limitations 1D and 1E. Petitioner’s contentions in this ground involve combining Khan and Ali’s teachings of identifying a horizon line and lane lines with Choe. For example, Petitioner argues that “[u]sing predictive models for Choe’s lane and horizon prediction would have combined known elements according to known methods to yield predictable results” and that “[i]mplementing these known mathematical models in Choe’s calibration system, according to their known functions, would have yielded predictable results.” Pet. 39. Petitioner further argues that “[u]sing predictive models for Choe’s lane and horizon prediction would have used a known technique (predictive models) to improve similar devices in the same way” and that “[u]sing predictive models for Choe’s lane and horizon prediction would have also applied a known technique (predictive models) to a known device (a manual annotator device) ready for improvement.” Pet. 40. Petitioner’s proposed combination, therefore, still relies on Choe’s teachings of transmitting an overlaid image to an annotator device. We note that Petitioner asserts that, “[o]nce Khan in view of Ali identifies the horizon and lane lines, it overlays the horizon line and/or lane lines on the video, as shown in the screenshots below.” Pet. 41–42. Although Petitioner mentions Khan and Ali’s teachings with respect to video here, Petitioner does not adequately explain how the teaching of an overlaid video would be combined with Choe’s single image annotator teachings. As discussed above, Choe discloses transmitting a single overlaid image to the annotator” slip op. at 23
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Thus, Petitioner has not provided sufficient evidence and argument to explain how the additional teachings of Khan and Ali teach limitations 1D and 1E in combination with Choe. Petitioner, therefore, has not demonstrated unpatentability of claims 1–5 by a preponderance of the evidence. F. Obviousness over Choe and Workman (Claims 1–4) Petitioner asserts that claims 1–4 would have been obvious over the combined teachings of Choe and Workman. Pet. 47–52; Pet. Reply 26–30. Petitioner asserts that, “if [Patent Owner] alleges that Choe does not explicitly disclose which predictive models it uses or whether it uses predictive models to identify the horizon line, a [person of ordinary skill in the art] would have searched for references that use predictive models and how such models were used,” which “would have led to Workman, which discloses predictive models to identify the horizon line.” Pet. 47. According to Petitioner, “[u]sing Workman’s predictive model to identify the horizon line would also have merely been combining known elements ([convolutional neural networks (CNNs)] and annotation for camera calibration) according to known methods to yield predictable results and used known techniques (CNNs) to improve similar devices in the same way.” Pet. 48–49. Thus, Petitioner relies on Workman to teach a predictive model to identify a horizon line. See Pet. 47–49. Choe with respect to limitations 1D and 1E. Indeed, Workman involves horizon line estimation in single images. See Ex. 1011, 10 (§ 5) (“We introduced Horizon Lines in the Wild (HLW), a new dataset for single image horizon line estimation, to address the limitations of existing horizon line detection datasets.”). Petitioner, therefore, has not demonstrated unpatentability of claims 1–4 by a preponderance of the evidence.” slip op. at 24
- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner criticizes Petitioner’s proposed level of ordinary skill for not requiring “any training or experience in ‘automotive systems,’ precisely what the ’580 [p]atent relates to.” PO Resp. 7. According to Patent Owner, a person of ordinary skill in the art would have had “a training and/or experience in design of software for camera/sensor systems in the automotive industry.” PO Resp. 8–9 (citing Ex. 2003 ¶ 35).” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We need not construe expressly any claim terms to decide the issues before us. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 6
Patent outcomesUS 11,875,580 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,875,580 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Digital Global Systems, Inc. v. Deepsig, Inc.Some claims unpatentablePTAB · Mar 6, 2026 · IPR2024-01358 · APJ William V Saindon · IPR · Final written decision
Claims 1–3, 7–11, 15–19, 23, and 24 are unpatentable as obvious; claims 4–6, 12–14, and 20–22 were not shown unpatentable because the prior art did not teach the claimed received-signal feedback and transmitter-model update.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that: Persons of ordinary skill in the art (“POSITA”) would have a bachelor’s degree in electrical engineering, computer engineering, or an equivalent degree and at least two years of experience working with of radio communication systems and machine learning. Additional work or research experience can substitute for less or different education, and vice-versa. Pet. 3–4 (citing Ex. 1003 ¶¶ 33–34). Patent Owner does not appear to challenge this level of skill. We use Petitioner’s definition for purposes of this Decision because it appears consistent with the level of skill reflected in the prior art and ’704 patent.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“parameters “associated with the base station.” PO Resp. 31–32. In particular, Patent Owner argues that a transmitter “implemented in a base station” is not “associated with the base station.” Id. at 31. Petitioner argues that Patent Owner offers no reason to believe that a transmitter “implemented in a base station” is not “associated with the base station.” Pet. Reply 4–5; see also id. at 3–6 (entire argument). A plain reading of a “model associated with a base station” would encompass a model that operates in a base station. We do not see anything in the ’704 specification that would indicate “associated with” has any special meaning, or has a meaning contrary to our understanding of the plain meaning. We do not see the word “associated” outside the claims, whereas we see the word “implement” throughout the specification, generally in reference to an actual use of a model (consistent with our plain reading). See, e.g., Ex. 1001, 5:35–39, 6:3–17, 10:55–11:3 (discussing “implementations” where the model or some other feature of the system is used in a particular way). Accordingly, we construe a model “implemented in a base station” to be “associated with the base station.”” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“scenarios” (see PO Resp. 16–21), Patent Owner argues that “Jüschke does not disclose any association of the weight or bias parameters, . . . to any deployment scenario, and . . . base station” (id. at 19). For the reasons explained in our claim construction section above, we construe “deployment scenarios” to include “inline mode” models located within a base station, according to the list of deployment scenarios set out in the ’704 patent. See Ex. 1001, 2:38–65. The in-line deployment scenario depicted in Figure 6A of the ’704 patent bears a striking resemblance to the arrangement depicted in Figure 1 of Jüschke. In both figures, the analog radio signal is fed directly into the model and then the model directly outputs the signal to the amplifier. Compare Ex. 1001, Fig. 6A, with Ex. 1005, Fig. 1. As construed, the “deployment scenarios” represent the physical configurations of the device in which the model is found, such as “in-line.” Petitioner shows by a preponderance of the evidence that Jüschke’s similar in-line configuration is a “deployment scenario” as claimed because it teaches an inline model for a cellular system transmitter (i.e., base station). Pet. 26–29 (citing, e.g., Ex. 1005, Fig. 1, ¶¶ 6, 59; Ex. 1003 ¶¶ 146–147); see also Ex. 1001, 2:37–41 (stating that “[t]he particular deployment scenario[] may be . . . sending a radio transmission from a cellular base station that includes the . . . model . . . in an inline mode”).” slip op. at 26
- BurdenNot shown unpatentable
“Based on our claim construction analysis of claim 4, above, we agree with Patent Owner that claim 4 requires an actually transmitted signal and an update of the transmitter’s model. This claim construction eliminates Petitioner’s position regarding Holt teaching a modeled signal. See, e.g., Pet. Reply 17–23. We then turn to Petitioner’s argument that Holt teaches updating a model using an actually transmitted signal. See Pet. 59–60. There, Petitioner relies on a disclosure in Holt of an “actual communication channel 302 used to train the channel model 208.” Ex. 1006, 18:1–2. This is depicted in Figure 6 of Holt, in connection with a “fourth loss function” which is used to “train the decoder model.” Id. at 18:42–48; see generally id. at 17:58–18:51 (describing Figure 6). Whether training the channel model or the decoder model, Holt here does not disclose using the actual communication channel to train the encoder, i.e., transmitter. In sum, we find that Petitioner has not shown by a preponderance of the evidence that the prior art describes the claimed step of “obtaining a received radio signal,” and even if it did, Petitioner has not shown by a preponderance of the evidence that the prior art describes the claimed step of “updating the value of the model parameters” in the manner required by claim 4. Claims 12 and 20 are nearly identical to claim 4, and Petitioner’s ground fails for similar reasons. See Pet. 76. Claims 5, 6, 13, 14, 21 and 22 depend from claims 4, 12, and 20, and Petitioner’s ground fails for similar reasons as those claims. See id. at 77–80.” slip op. at 31
Patent outcomesUS 11,018,704 mixedClaim construction§ 103 obviousnessPatents in suitUS 11,018,704 - Kia Corp. / Toyota Motor Corp. v. Emerging Automotive LLCSome claims unpatentablePTAB · Jan 26, 2026 · IPR2024-01167 · APJ Georgianna W Braden · IPR · Final written decision
Claims 1–5 and 7–21 are unpatentable over Kleve-based grounds; claim 6 was not shown unpatentable because the record did not support obviousness of key sharing.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Here, Petitioner asserts a person of ordinary skill in the art would have “had at least a four-year undergraduate degree in electrical engineering, automotive engineering, or a closely related field and at least two years of experience in the field of access control systems, vehicle electronics, and/or cryptography.” Pet. 8–9 (citing Ex. 1004 ¶ 85). Dr. Almeroth supports Petitioner’s position and further testifies that “[a]dditional education could substitute for professional experience and vice versa.” Ex. 1004 ¶ 85. Patent Owner does not assert a different level of skill in the art at the time of the alleged invention and appears to apply Petitioner’s proposed level of skill. See PO Resp. Patent Owner’s declarant, Dr. Malek, explicitly adopts Dr. Almeroth’s level of skill in the art but states that his opinions would be applicable under any reasonable definition for an ordinarily skilled artisan at the critical time. See Ex. 2021 ¶ 38. For the purposes of this Decision, we too adopt Petitioner’s level of ordinary skill in the art because it appears consistent with the problems addressed in the ’659 patent and the prior art of record.” slip op. at 12
- Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed
“We do not agree with Patent Owner’s argument that Dr. Almeroth’s declaration testimony contradicts Kleve. See PO Resp. 27–29. Rather, as discussed previously, we find that Kleve’s vehicle owner can set a restriction, such as the rental start period, prior to step 214 in Kleve’s Figure 2 and that such restrictions can be associated with the e-key. We also do not agree with Patent Owner’s argument that (1) Dr. Almeroth’s declaration testimony contradicts his deposition testimony or that (2) Dr. Almeroth “admitted his testimony was wrong.” See PO Sur-Reply 7 (citing PO Resp. 47–48 (citing Ex. 2022, 27:5–10, 27:21–28:1; Ex. 2021 ¶ 96)). In a particular embodiment to which Dr. Almeroth was citing, he noted that the e-key is always generated after the rental agreement. See Ex. 2022, 26:14– 20. Then the following exchange occurs: Q. So you use typically and always. So always does not refer to all of the embodiments of Kleve, is that fair? A. I think a person of skill in the art could read Kleve and understand that there are probably multiple ways in which the flow of actions among the parties could occur. And I think thinking about a real world scenario, in most cases you have an agreement before you would generate an eKey, but maybe, maybe not. I don’t -- I don’t know that the real world is necessarily cut and dry. So reading -- a person reading Kleve would understand it’s describing embodiments where it’s scenario, but I don’t know that it would necessarily be a hard and fast rule in every embodiment or in the understanding a person of skill in the art would have. Id. at 28:3–20. There is nothing in the deposition testimony by Dr. Almeroth that appears inconsistent with his declaration testimony nor does there appear to be the kind of admission touted by Patent Owner. Instead, it is Dr. Malek who takes an overly narrow view of Kleve that appears inconsistent with Kleve’s disclosure when read as a whole. See, e.g., Ex. 2021 ¶¶ 82–88. Therefore, we do not credit or agree with Dr. Malek’s testimony that Kleve fails to teach the concept of a virtual key created with the agreed-upon rental period as a restriction. See id. ¶ 57. Thus, based on the entire trial record, we find that Petitioner has” slip op. at 33
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“After review of the arguments and evidence, we agree with Petitioner’s position. Specifically, we agree that (1) both Kleve and Hatton are directed to use of electronic key systems for vehicles (see Ex. 1005 ¶¶ 7– 9, 39, 63; Ex. 1008, 1:48–52, 1:61–2:2, 5:25–34) and (2) encrypted communications would have been understood to be effective in preventing unauthorized access to the vehicle, something that is taught explicitly by Hatton (see Ex. 1008, 9:50–63). Given these disclosures by Kleve and Hatton, we find that a person of ordinary skill in the art would have had a at the challenged claims. Accordingly, we find that a person of ordinary skill in the art at the critical time would have had a reason to combine the teachings of Kleve with that of Hatton.” slip op. at 36
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner. Petitioner’s argument appears to be purely hindsight analysis based on the teachings of the ’659 patent and the limitations of challenged claim 6 because there is insufficient evidence or teachings in the cited prior art to suggest the sharing of virtual keys. Petitioner’s argument that having “rental microbusiness” implemented as a “smart phone application” that enables sharing virtual keys is insufficient to show obviousness, because, as noted by Patent Owner, certain embodiments in Kleve appear to discourage or even hinder the sharing of virtual keys. These embodiments require the use of credentials associated with the virtual key, where the credentials can be “facial recognition, voice print recognition, matrix barcode (ex. two-dimensional code), code word or phrase for speech recognition, temporary mobile web login IDs and password, or other types service.” See Ex. 1005 ¶ 37. Dr. Almeroth testifies that multiple people could be authorized on the same vehicle if they collectively rent a vehicle and that a person of ordinary skill in the art would “have been motivated to enable each user to share the virtual key with other authorized users associated with the same rental request.” Ex. 1004 ¶ 55. But given Kleve’s disclosure that the system handles key generation and distribution (Ex. 1005 ¶ 39), the evidence does not show that a person of ordinary skill in the art would have wanted to give this control to each authorized user who has received an e-key. “It is impermissible to use the claimed invention as an instruction manual or ‘template’ to piece together the teachings of the prior art so that the claimed invention is rendered obvious.” Fritch, 972 F.2d 1260, 1266 (Fed. Cir. 1992) (citing In re Gorman, 933 F.2d 982, 987 (Fed. Cir. 1991)). Kleve’s teachings undermine Petitioner’s position, and do not support a finding of obviousness. Accordingly, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Kleve alone or in combination with Hatton would have rendered dependent claim 6 obvious to a person of ordinary skill in the art at the critical time.” slip op. at 39
Patent outcomesUS 11,738,659 mixed§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,738,659 - PTAB · Jan 14, 2026 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Remand
On remand, the Board reinstituted review of all challenged claims on all grounds after finding Petitioner sufficiently explained its differing claim-construction positions.
RulingsRemand decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Id. The Director neither addressed the merits of Petitioner’s challenges nor found that our prior consideration of those merits was faulty. Accordingly, we understand that we need not reconsider our conclusion that Petitioner had demonstrated a reasonable likelihood of proving that claims 1, 2, 7–9, 11, 12, and 20–24 were unpatentable or that the merits of patentability set forth in the Petition warranted institution of inter partes review.” slip op. at 5
- BurdenDecided for petitioner
“The question before us, therefore, is whether the Petitioner’s proffered explanation that it has proposed a different claim interpretation before the Board because the District Court may decline to adopt the narrower claim interpretations it advocates there is sufficient. We find that Petitioner’s explanation is sufficient because it follows the Director’s exemplary logic. Whether a district court has already or might in the future decline to adopt constructions that a petitioner proposes in related district court litigation merely reflects the timing of when a dispute over claim interpretation will be resolved. The Director and Patent Owner both recognize that, to resolve the dispute over claim interpretation that exists here, a decision-maker must determine “a single claim construction that best captures the true meaning of the patent claim.” Remand 4; PO Remand Br. 3. Based on the record presented by the parties to date in this proceeding, no dispute exists that the disputed claim terms mean what Patent Owner says they mean in the Litigation. Accordingly, we find that, at this stage of the proceeding, it is undisputed that Patent Owner’s interpretations of the claim terms represent the “single claim construction that best captures the true meaning of the patent claim.”8 Under that claim interpretation, we” slip op. at 8
NonePatents in suitUS 11,835,421 - PTAB · Dec 19, 2025 · IPR2025-01110 · APJ Kristen L Droesch · IPR · Institution
The Board instituted IPR on claims 1–16, finding a reasonable likelihood they are obvious over Kim and over Chu and Choi.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted unless it is determined that “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable 1 Deputy Director Stewart was recused in this matter. claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine, based on the record before us, there is a reasonable likelihood Petitioner would prevail in showing at least one of the challenged claims is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a Bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and at least 3 years of experience in the research, design or development of wireless communication devices, systems, and/or networks, or the equivalent, as of the Critical Date,” and that “[i]ncreased educational experience can make up for less work experience, and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 26–28). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art, except as to the date that pertains to such skill level. Prelim. Resp. 4–5. Namely, Patent Owner asserts that “Petitioner is incorrect” that “the ’171 Patent is entitled to an effective date of no earlier than January 22, 2021.” Id. at 5. For the purpose of institution, we adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’171 Patent Specification and the asserted prior art, except that we delete the qualifier “at least” to eliminate vagueness as to the amount of required experience.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“claim construction standard as that applied in federal courts in a civil action under 35 U.S.C. § 282(b), which is generally referred to as the Phillips standard. See 37 C.F.R. § 42.100(b); Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). Under the Phillips standard, “words of a claim ‘are generally given their ordinary and customary meaning.’” Phillips, 415 F.3d at 1312. “Petitioner submits that no formal claim constructions are necessary.” Pet. 1–2. Similarly, “Patent Owner does not contend that any formal claim construction is necessary” at this stage of the proceeding. Prelim. Resp. 5. For the purpose of institution, we need not explicitly construe any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Corp. Techs., Inc. v. Microsoft Corp., 627 F.3d 859, 870–71 (Fed. Cir. 2010). For a claim in a later-filed application to be entitled to the filing date of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must [] convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.”), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). On the record before us, we do not agree that the ’171 Patent is entitled to a filing date earlier than Jan. 11, 2021. In particular, we do not agree that PCT ’199 describes the invention in enough detail such that a person of ordinary skill in the art could conclude that the inventor was in possession of the invention as of the March 4, 2016 filing date. The disclosures of PCT ’199 cited by Patent Owner to show written description support show: (1) transmission packets for multi-user uplink data, which includes padding such that multi-user upstream data transfers from each resource terminate at the same time (see Ex. 1012 ¶¶ 17–21); (2) performing padding on a trigger frame that triggers multi-user simultaneous transmission, where the trigger frame includes AID information of the performing preset padding before the FCS field of the trigger frame according to one embodiment (see Ex. 1012 ¶ 136, Fig. 20); and (4) inserting redundant AID information prior to the FCS field of the trigger frame, according to another embodiment (see Ex. 1012 ¶ 136, Fig. 20). PCT ’199 does not describe the invention in enough detail to enable a person of ordinary skill in the art to conclude that the inventor possessed a frame for allocating resource for uplink (UL) multi-user (MU) transmission to one or more terminals that includes the AID field set to a value related to a first padding field, when the padding field is included in the frame. In particular, we discern no disclosure that conveys that the inventor possessed the following: (1) an AID field for the MU UL resource allocation frame is set to a value, (2) that the AID field is set to a value related to the padding field, and (3) that the AID field is set to a value related to the padding field, and conditioned on the inclusion of the AID field in the frame. Moreover, to the extent that Patent Owner’s assertions are premised on the PCT ’199’s disclosure of a preset padding being performed before the FCS field of the trigger frame and the disclosure of inserting redundant AID information prior to the FCS field of the trigger frame, we note that these disclosures are directed to two embodiments. See Ex. 1012 ¶ 136, Fig. 20. PCT ’199 does not provide any suggestion that the two embodiments are used together, or that the redundant AID information of one embodiment can serve as a preset padding of the other embodiment.” slip op. at 16
Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 11,716,171 - PTAB · Dec 19, 2025 · IPR2025-01111 · APJ Kristen L Droesch · IPR · Institution
The Board instituted IPR on claims 1–18, finding a reasonable likelihood they are unpatentable over Kim and over Chu in combination with Choi.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“An inter partes review may not be instituted unless it is determined that “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable 1 Deputy Director Stewart was recused in this matter. claims challenged in the petition.” 35 U.S.C. § 314(a). For the reasons provided below, we determine, based on the record before us, there is a reasonable likelihood Petitioner would prevail in showing at least one of the challenged claims is unpatentable.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a Bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and at least 3 years of experience in the research, design or development of wireless communication devices, systems, and/or networks, or the equivalent, as of the Critical Date,” and that “[i]ncreased educational experience can make up for less work experience, and vice versa.” Pet. 2 (citing Ex. 1003 ¶¶ 26–28). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art, except as to the date that pertains to such skill level. Prelim. Resp. 4. Namely, Patent Owner asserts that “Petitioner is incorrect” that “the ’186 Patent is entitled to an effective date of no earlier than April 8, 2019.” Id. at 4–5. For the purpose of institution, we adopt Petitioner’s definition of a person of ordinary skill in the art because it is consistent with the level of skill reflected by the ’186 Patent Specification and the asserted prior art, except that we delete the qualifier “at least” to eliminate vagueness as to the amount of required experience.” slip op. at 10
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“of an earlier application, the earlier application must provide written description support for the claimed subject matter. Anascape, Ltd. v. Nintendo of Am. Inc., 601 F.3d 1333, 1337 (Fed. Cir. 2010). To satisfy the written description requirement, “a prior application itself must describe an invention, and do so in sufficient detail that one skilled in the art can clearly conclude that the inventor invented the claimed invention as of the filing date sought.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997); see also VasCath v. Mahurkar, 935 F.2d 1555, 1563–64 (Fed. Cir. 1991) (“[T]he applicant must [] convey with reasonable clarity to those skilled in the art that, as of the filing date sought, he or she was in possession of the invention . . . now claimed.”), Ariad Pharm. Inc. v. Eli Lilly & Co., 598 F.3d 1336, 1352 (Fed. Cir. 2010) (en banc) (“[I]t is the specification itself that must demonstrate possession.”). On the record before us, we do not agree that the ’186 Patent is entitled to a filing date earlier than April 8, 2019. In particular, we do not agree that PCT ’199 describes the invention in enough detail such that a person of ordinary skill in the art could conclude that the inventor was in possession of the invention as of the March 4, 2016 filing date. The disclosures of PCT ’199 cited by Patent Owner to show written description support, show: (1) transmission packets for multi-user uplink data, which includes padding such that multi-user upstream data transfers from each resource terminate at the same time (see Ex. 1012 ¶¶ 17–21); (2) performing padding on a trigger frame that triggers multi-user simultaneous transmission, where the trigger frame includes AID information of the stations assigned to each channel (see Ex. 1012 ¶¶ 134–135, Fig. 20); (3) performing preset padding before the FCS field of the trigger frame inserting redundant AID information prior to the FCS field of the trigger frame, according to another embodiment (see Ex. 1012 ¶ 136, Fig. 20). PCT ’199 does not describe the invention in enough detail to enable a person of ordinary skill in the art to conclude that the inventor possessed a trigger frame indicating uplink transmission for one or more terminals that includes an AID field used to identify whether the trigger frame includes a padding field, and the trigger frame including the padding field when the AID field is set to a specific value. In particular, we discern no disclosure that conveys that the inventor possessed the following: (1) a trigger frame indicating uplink transmission to one or more terminals and including an AID field used to identify whether the trigger frame includes a padding field; (2) the AID field for the trigger frame is set to a specific value, and (3) that trigger frame includes the padding field when the AID field is set to a specific value. Moreover, to the extent that Patent Owner’s assertions are premised on the PCT ’199’s disclosure of a preset padding being performed before the FCS field of the trigger frame and the disclosure of inserting redundant AID information prior to the FCS field of the trigger frame, we note that these disclosures are directed to two embodiments. See Ex. 1012 ¶ 136, Fig. 20. PCT ’199 does not provide any suggestion that the two embodiments are used together, or that the redundant AID information of one embodiment can serve as a preset padding of the other embodiment. On the record before us, we also do not agree that KR ’754 describes the invention in enough detail such that a person of ordinary skill in the art could conclude that the inventor was in possession of the invention as of the March 17, 2015 filing date of KR ’754. The disclosures of KR ’754 cited by Patent Owner to show written description support show: (1) multiplexed terminals over respective channels, (see Ex. 1008 ¶¶ 65–66, Fig. 10); (2) differing the number of AID values in the batch acknowledgment (BA) information field when the number of terminals assigned to each channel differs, setting the length of each multiplexed group ACK differently, and, if necessary, aligning the lengths of the multiplexed group ACKs based on the channel with the longest assigned BA information by adding zero padding or repeatedly inserting BA information (see Ex. 1008 ¶¶ 66–70, Fig. 11); and (3) applying the use of the AID field padding and the use of BA padding in a downlink OFDMA trigger process during multi-user downlink transmission to align the length of the trigger when the AP notifies the terminals assigned to each channel by inserting zero padding or repeating AIDs (see Ex. 1008 ¶¶ 71–72, Figs. 11–12). KR ’754 does not describe the invention in enough detail to enable a person of ordinary skill in the art to conclude that the inventor possessed a trigger frame indicating uplink transmission for one or more terminals that includes an AID field used to identify whether the trigger frame includes a padding field, and the trigger frame including the padding field when the AID field is set to a specific value. In particular, we do not discern disclosure in KR ’754 that conveys that the inventor possessed the following: (1) a trigger frame indicating uplink transmission to one or more terminals and including an AID field used to identify whether the trigger frame includes a padding field; (2) the AID field for the trigger frame is set to a specific value, and (3) that trigger frame includes the padding field when the AID field is set to a specific value. We find misplaced Patent Owner’s argument that “KR ’754’s discussion about Figure 10 and Figure 11 would have been understood [by a POSITA] as disclosing a padding method used to improve predictability and consistency trigger frame” (Prelim. Resp. 12) because: (1) it addresses uplink transmissions and not a trigger frame indicating uplink transmission to one or more terminals; (2) it does not address that the padding field is included in the trigger frame when the AID field is set to a specific value; and (3) it is unsupported attorney argument regarding the understanding of a person of ordinary skill in the art. Argument of counsel cannot take the place of objective evidence. See Gemtron Corp. v. Saint-Gobain Corp., 572 F.3d 1371, 1380 (Fed. Cir. 2009). We also find misplaced Patent Owner’s argument that “the padding discussed by KR ’754 regarding its Figure 12 embodiment is not limited to downlink transmission and would have been understood by a POSITA as also being used to schedule uplink ones” (Prelim Resp. 14) because: (1) KR ’754 does not provide any suggestion that the same technique can be used for uplink transmission trigger frames; (2) Patent Owner’s argument does not address that the padding field is included in the trigger frame when the AID field is set to a specific value; and (3) Patent Owner’s argument is unsupported attorney argument regarding the understanding of a person of ordinary skill in the art. See Gemtron, 572 F.3d at 1380. For the foregoing reasons and based on this record, for the purpose of institution, we find that the ’186 Patent is not entitled to an effective filing date earlier than April 8, 2019 and find that Kim is prior art. We note that the limitations at the heart of the written description dispute were added in an amendment filed August 9, 2020. See Ex. 1002, 214–21. In further briefing, the parties should address the respective burdens of production and persuasion for establishing that the ’186 Patent is entitled to an earlier” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We do not agree with Patent Owner’s arguments because they are premised on Choi’s teachings as limited to AIDs transmitted via a control frame broadcast as a TIM element. A prior art “reference must be considered for everything it teaches by way of technology and is not limited to the particular invention it is describing and attempting to protect.” EWP Corp. v. Reliance Universal Inc., 755 F.2d 898, 907 (Fed. Cir. 1985) (emphasis omitted). Chu, Choi, and the testimony of Dr. Ding (Ex. 1003), we are persuaded Petitioner sets forth sufficient articulated reasoning with rational underpinning to support the conclusion that it would have been obvious to a person of ordinary skill in the art to combine Chu’s teachings with Choi’s use of specific AID or ΔAID values as indicators of the end of meaningful data and the beginning of padding that would allow client stations to reliably determine where the useful content of the trigger frame ends and where optional padding begins, with the benefits of improved parsing efficiency, enhanced synchronization, and reduced likelihood of misinterpreting padding as data as padding. See Pet. 46–48 (citing Ex. 1003 ¶¶ 150–156; Ex. 1015 ¶ 93; Ex. 1016 ¶¶ 24, 184), 61–62 (citing Ex. 1003 ¶¶ 157–163, Pet. 45–48); KSR, 550 U.S. at 418.” slip op. at 29
§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 10,911,186
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.