PTAB
Advanced fields
510 decisions · 447msnewest first
  • PTAB · Oct 5, 2026 · IPR2025-00438 · APJ Lilan Ren · IPR · Final written decision

    Claims 1–5, 7–13, and 16–20 are unpatentable; the Board found the challenged claims unpatentable on the grounds set out in its conclusions and summary table.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner’s definition of the level of ordinary skill in the art, and Petitioner’s definition appears consistent with the disclosures of the ’466 patent and the prior art of record. Accordingly, we adopt Petitioner’s definition. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). C. Claim Construction” slip op. at 12

    • BurdenUnpatentable

      “Decision under 35 U.S.C. § 318(a) as to the patentability of the challenged claims of the ’466 patent. For the reasons discussed below, we determine Petitioner has established by a preponderance of the evidence that claims 1– 5, 7–13, and 16–20 of the ’466 patent are unpatentable.” slip op. at 2

    Patent outcomesUS 10,569,466 unpatentable
    Nonecites Phillips · KSR · Graham
    Patents in suitUS 10,569,466
  • PTAB · Sep 29, 2026 · IPR2025-00532 · APJ Hyun J Jung · IPR · Final written decision

    Claims 1–16 are unpatentable under § 103 over Warren, Warren and Dunn, Calderon and RepRap20208, and Calderon, RepRap20208, and Dunn.

    RulingsFinal written decision
    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

      “of ordinary skill in the art would have made the proposed combination in the manner asserted with a reasonable expectation of success. Weighing our underlying factual determinations, a preponderance of the evidence persuades us that claim 7 of the ’381 patent is unpatentable over Calderon, RepRap20208, and Dunn. Arctic Cat, 876 F.3d at 1361.” slip op. at 108

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

      “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). Whether a document qualifies as a printed publication is a legal conclusion based on underlying factual determinations. Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). slip op. at 69

    Patent outcomesUS 10,556,381 unpatentable
    § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,556,381
  • PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

    Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

      “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

    • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

      “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

    Patent outcomesUS 11,886,774 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,886,774
  • PTAB · Sep 28, 2026 · IPR2025-00531 · APJ Hyun J Jung · IPR · Final written decision

    Claims 1–11 and 13–15 are unpatentable over the stated obviousness grounds; claim 12 was not shown unpatentable.

    RulingsFinal written decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

      “Petitioner filed a Petition (Paper 2, “Pet.”) requesting institution of an inter partes review of claims 1–15 of the ’698 patent. Discretionary denial of institution was determined to be not appropriate in this proceeding, and the proceeding was referred to the Board. Paper 10. Pursuant to 35 U.S.C. § 314, we instituted an inter partes review of claims 1–15 of the ’698 patent on all presented challenges. Paper 11 (“Inst. Dec.”), 15.” slip op. at 2

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

      “Decision is issued pursuant to 35 U.S.C. § 318(a) and 37 C.F.R. § 42.73 (2025). For the reasons that follow, we determine that Shenzhen Tuozhu Technology Co., Ltd. (“Petitioner”) has shown by a preponderance of the evidence that claims 1–11 and 13–15, but not claim 12, of U.S. Patent No. 9,168,698 B2 (Ex. 1001, “the ’698 patent”) are unpatentable.” slip op. at 2

    Patent outcomesUS 9,168,698 mixed
    § 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,168,698
  • PTAB · Aug 3, 2026 · IPR2025-00283 · APJ Lilan Ren · IPR · Final written decision

    The Board cancelled claim 11 and granted substitute claims 14–16, finding Petitioner had not shown those claims unpatentable on any asserted ground.

    RulingsFinal written decision
    • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted

      “must determine whether the motion to amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4. In that regard, Patent Owner bears the burden of persuasion to show that: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent or introduce new subject matter;” slip op. at 9

    • ExcludeMotion to exclude, deniedDenied

      “In this case, Patent Owner’s expert “Dr. Zhou signed the second declaration, stood behind its contents, and was available for cross-examination.” Paper 35, 4. Petitioner does not dispute this statement. Paper 39, 1. Petitioner does not identify any specific undue prejudice caused by Exhibit 2008. For example, Petitioner argues that “the failure to impress upon a witness that a statement is under oath goes to the heart of its reliability as evidence” and that “as the Board has recognized, hearsay is inherently unreliable” without specifying what statement in Exhibit 2008 lacks reliability. Paper 39, 4. Because Petitioner does not provide specific evidence of undue prejudice, we find Petitioner has suffered no such undue prejudice in this case. See Liquidia, 2021 WL 4860773 at *25. We therefore deny Petitioner’s Motion to Exclude on the basis of lack of authenticity. With regard to the assertion that Exhibit 2008 is hearsay, Petitioner objects to the exhibit because the testimony is based “on other informal and unpublished documents that are hearsay under FRE 802.” Paper 29, 1. Petitioner does not specify what such “informal and unpublished documents” are. See id. Federal Rule of Evidence 703 expressly states, “[a]n expert may base an opinion on fact or data in the case that the expert has been made aware of or personally observed.” The facts or data “need not be deny Petitioner’s Motion to Exclude on the basis of hearsay.” slip op. at 50

    • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable

      “Petitioner’s argument is unpersuasive. Paragraph 59 of the ’503 application describes formula 8-1 but does not support Petitioner’s argument that other unknown formulas may be included in the recited modified heavy chains. Ex. 2003 ¶ 59. Petitioner’s hypothesis that the recited heavy chains may (or may not) encompass unknown formulas is also inapposite to the written description inquiry before us — that is, whether the inventor was in possession of the subject matter recited in claims 14–16 based on the disclosure including formulas 8-1, 8-2, and 8-3. See PowerOasis, 522 F.3d at 1306.” slip op. at 14

    • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)EnabledNot shown unpatentable

      “These arguments in the Sur-Reply are unpersuasive to show a lack of enablement first and foremost because the arguments do not specifically provide evidence showing that any purported experimentation is undue. See Sur-Reply 2–8 (asserting, but without providing evidence under any specific Wands factors, that the examples and guidance in the specification do not extend to the broad scope of all antibodies); see Wands, 858 F.2d at 737. We again emphasize that the analysis of undue experimentation does not necessarily require every Wands factor to be explicitly addressed but the analysis must be based on “weighing many factual considerations” depending on the nature of the invention and underlying art. Cephalon, Inc. v. Watson Pharms., Inc., 707 F.3d 1330, 1336 (Fed. Cir. 2013). The assertion that the claim scope is broad alone does not suffice to show a lack of enablement based on the record before us. Moreover, as we note supra, Petitioner’s claim scope argument is based on the false premise that the scope of claims 14–16 is as broad as the claim term “antibody” without taking into account all other claim elements. For example, Petitioner does not disagree with Patent Owner’s statement that “[t]he ’675 Patent’s specification discloses the structural modification site, the chemistry used to modify that residue, and working examples demonstrating the modification” (Reply 2), but asserts only that “[t]he disclosure of SSFI that only binds to IgG1 Fc domains (SEQ ID NO:1) is . . . . inconsistent with the expansive scope of the claims.” Sur-Reply 5. Petitioner’s argument that the claims encompass proteins that lack a lysine reside at a 248 position improperly excludes from the claim language the “lysine residue at 248 position . . . [as] determined by the EU numbering system” that claims 14–16 require. As Dr. Zhou testifies, “each proposed lysine residue at position 248 (EU numbering) is covalently modified with a specific attachment with a terminal bio-orthogonal click-chemistry functional group. The specification describes targeted transfer of a chemical functional group to lysine 248” and when claims 14–16 are considered in their entirety, which includes all claim elements, “[a] POSA would understand the claim itself to limit the modified antibodies to those with lysine at position 248.” Ex. 2004 ¶ 48; Ex. 2008 ¶ 47. We also note that Patent Owner states “a POSA would understand that the phrase ‘one or more modified heavy chain’ encompasses antibodies within typical DAR distributions (i.e., fractional numbers) rather than requiring a distinct process for producing antibodies bearing modified heavy chains in exact integers.” Reply 2–3. Moreover, Patent Owner states that PepTalk Presentation demonstrates that “a POSA would understand antibody conjugation products to exist as mixtures rather than discrete whole number species” because PepTalk Presentation “presents DAR values as non-integer measurements, i.e. DARs of 1.8 and 1.9 reflecting such distributions.” Id. at 3 (citing Ex. 1007, 28). According to Patent Owner, “preparations having an average DAR of approximately 1.8 (commonly referred to in practice as ‘DAR2’) may reflect typical reaction distributions in which some antibodies contain two modified heavy chains while others contain fewer.” Id. at 3 (citing Ex. 2008 ¶ 46). Petitioner does not rebut these statements. See Sur-Reply 2–8. Based on the foregoing, the evidence before us does not show any” slip op. at 27

    Patent outcomesUS 11,896,675 not shown unpatentable
    § 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
    Patents in suitUS 11,896,675
  • PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

    The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

      “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

    • BurdenNot shown unpatentable

      “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

    • Obviousness (§103) › Analogous artAnalogous artOther

      “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

    Patent outcomesUS 9,421,713 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,421,713
  • PTAB · Jun 9, 2026 · IPR2025-00311 · APJ Christopher M Kaiser · IPR · Final written decision

    Claims 1, 3–11, and 17–22 are unpatentable as obvious over grounds using Mazumder and Mori; grounds relying on Henke fail because Henke is not analogous art.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printers including remote control of rapid fabrication systems.” Pet. 6 (citing Ex. 1003 ¶¶ 40–42). Petitioner also argues that “[a]dditional years of experience could substitute for an advanced-level degree (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Electrical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” PO Resp. 11–12. Neither party explains why the outcome of this case would be affected by the adoption of either of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “There is also evidence that supports Petitioner’s proposed construction, under which a user interface may display both the image and the projection if it displays them at different times. This evidence includes statements in the specification that describe displaying an image “instead” of “a rendering of a three-dimensional model” and that describe displaying a “video image and/or model projection” rather than merely a video image and a model projection. Ex. 1001, 22:43–53, 24:52–55, Figs. 5, 7. It also includes arguments in the prosecution history distinguishing Taminger on the basis of failure of disclose any display of both an image and a projection at all, rather than on the basis of failure to disclose simultaneous display of both visualizations. Ex. 1002, 160, 161. Based on our review of all the probative evidence, we find that the preponderance of the evidence supports Petitioner’s view, so we construe the challenged claims as not requiring simultaneous display of the image and the projection.” slip op. at 15

    • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

      “With the problem solved by the ’324 patent defined as monitoring automated three-dimensional fabrication processes, we find that Mori is at least reasonably pertinent to the problem. Mori discloses “[a] machining status monitoring apparatus.” Ex. 1005, code (57), ¶ 43. That apparatus uses “actual CCD cameras . . . to image the workpiece.” Id. ¶ 49. It also has a “virtual image generating section” with “virtual CCD cameras” having “view points” that “match the view points of the actual CCD cameras.” Id. ¶¶ 59, 61, 62. This disclosure relates quite closely to monitoring an automated three-dimensional fabrication process and thus is at least reasonably pertinent to solving that problem. d) Conclusion For the reasons discussed above, Mori is both in the same field as the ’324 patent and at least reasonably pertinent to the problem solved by the ’324 patent. Accordingly, it is analogous art to the ’324 patent.” slip op. at 21

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

      “Regarding combining the teachings of Mazumder with those of Mori, the evidence of record shows that the print head of Mazumder’s three-dimensional printer could obscure portions of the actual camera’s view of the object being printed and that displaying Mori’s virtual image of the object in addition to Mazumder’s actual image of the object “would have allowed the user to of the remote computer to monitor the progress of the object even when the actual view of the object is partially or totally obscured.” Ex. 1003 ¶ 86. c) Conclusion Regarding Claim 1 For the reasons discussed above, the preponderance of the evidence shows that claim 1 would have been obvious over the combination of Mazumder and Mori.” slip op. at 26

    Patent outcomesUS 8,562,324 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 8,562,324
  • PTAB · Jun 3, 2026 · IPR2025-00257 · APJ Lilan Ren · IPR · Final written decision

    Claims 1–15 are unpatentable because Petitioner proved by a preponderance of the evidence that the asserted § 103 grounds render them unpatentable.

    RulingsFinal written decision
    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

      “proceeding, we determine Petitioner has proven by a preponderance of the evidence that each of claims 1–15 of the ’660 patent is unpatentable.” slip op. at 85

    Patent outcomesUS 9,592,660 unpatentable
    § 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,592,660
  • PTAB · Mar 23, 2026 · IPR2024-00582 · APJ Christopher L Ogden · IPR · Final written decision

    Claims 1–6, 14–16, and 19 are unpatentable based on anticipation by or obviousness over Pratt, and obviousness over Pratt–Ku, Ku, or Ku–Jiang.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “The parties agree that formal education could substitute for practical experience, and vice versa. Pet. 6, PO Resp. 18. The parties’ proposed levels of ordinary skill appear to be substantially similar, supported by testimonial evidence, and consistent with the asserted prior art and the types of problems and solutions identified in the ’738 patent. See, e.g., Ex. 1001, 1:6–61. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposed level of skill for this decision. The outcome of our decision would be the same under Patent Owner’s proposal.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “We find insufficient support in the specification or prosecution history to narrow the term “haptic effect” to only one that has not been modified or combined with another haptic effect. The ’738 patent still refers to combined or modified haptic effects as a “haptic effect.” Ex. 1001, 11:35–38 (“a haptic effect may further be modified or combined with another haptic effect” and “the haptic effect can include one or more haptic effects”). We also find no support for importing into the construction of “haptic effect” the ’738 patent’s example in which a haptic effect can be “based on the proximity signal and the touch sensor signal.” That is already an explicit claim limitation. Id. at 14:19–20 (“generate a haptic output signal based at least in part on the first [proximity] and second [touch] sensor signals”). Including that limitation as part of the construction of “haptic effect” would render the limitation superfluous. See Apple, Inc. v. Ameranth, Inc., 842 F.3d 1229, 1237 (Fed. Cir. 2016) (“The Board was correct to not include in its construction of ‘menu’ features of menus that are expressly recited in the claims . . . . Construing a claim term to include features of that term already recited in the claims would make those expressly recited features redundant.”). We also disagree with Patent Owner that the ’738 patent’s references to haptic effects modified or combined with other haptic effects are unclaimed embodiments. The ’738 patent discloses that a proximity-based haptic effect may be combined with a touch-based haptic effect, such as when “a particular haptic effect associated with a particular control on a user interface element [is] further . . . modified or combined with another haptic effect based on the proximity sensor signal,” or when “the haptic effect [to be output by the processor] . . . include[s] a haptic effect meant to confirm ‘pushing’ on a virtual button.” Ex. 1001, 11:32–40. These examples are consistent with the claim language and we find no credible evidence in the record that these embodiments are intended to be excluded from the claimed invention. Thus, we agree with Petitioner that it would be incorrect to construe the term “haptic effect” to include the extraneous limitations Patent Owner proposes. We also agree with Petitioner that a person of ordinary skill in the art reading the ’738 patent disclosure would have understood that a combined or modified haptic effect is still a haptic effect.” slip op. at 11

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

      “To show anticipation under § 102, a petitioner must locate every element in a claim, arranged as recited in the claim, in a single prior art reference. See Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). The limitations may be present in the reference “either explicitly or inherently.” In re Schreiber, 128 F.3d 1473, 1477 (Fed. Cir. 1997). In making this determination, we consider the reference “together with the knowledge of one of ordinary skill in the pertinent art.” In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1994) (citing In re Samour, 571 F.2d 559, 562 (CCPA 1978)).” slip op. at 13

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

      “We find Petitioner’s arguments persuasive and disagree with Patent Owner’s arguments to the contrary. Ku discloses summing two overlapping vibration signals, one “based at least in part on” data from a proximity sensor and another “based at least in part on” data from a touch sensor. Ex. 1008, Fig. 12 (items 705, 710, and 715). The summed signal 715 is the basis for generating what the user would perceive as a single haptic effect. See Ex. 1004 ¶ 210–212. This meets limitation 1F. We agree with Petitioner’s argument as to why there would have been a motivation to modify Pratt to include Ku’s teachings. Petitioner’s argument is not merely that Pratt was ready for improvement; Petitioner persuasively argues that a person of ordinary skill in the art would have had reason to add Ku’s method for confirming that the user has touched the intended icon to Pratt’s system. Both Pratt and Ku already disclose using both proximity and touch data in generating a haptic effect, and based on the evidence of record, we are of the view that combining the two teachings would not have been uniquely challenging or otherwise beyond the level of ordinary skill in the art. See Leapfrog Enters., Inc. v. Fisher-Price, Inc., 485 F.3d 1157, 1162 (Fed. Cir. 2007) (“Leapfrog presents no evidence that the inclusion of a reader in [electronic children's toys] was uniquely challenging or difficult to one of ordinary skill in the art.” (citing KSR, 550 U.S. at 419–420))” slip op. at 32

    Patent outcomesUS 11,175,738 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,175,738
  • PTAB · Mar 20, 2026 · IPR2024-00646 · APJ Christopher L Ogden · IPR · Final written decision

    Claims 1–18 are unpatentable under § 103 over Al-Shyoukh, Ivanov, and Stanescu; the Board did not reach the alternative ground.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner’s proposal is most like Petitioner’s alternative proposal which would include a bachelor’s degree and two years of experience. However, Patent Owner does not provide a specific number of years of industry experience and Patent Owner would include mixed-signal IC design as an alternative to analog circuit design. We consider analog circuit design to be most pertinent to the problems and solution discussed in the ’074 patent. See Ex. 1001, 1:15–2:44. In addition, we find credible Petitioner’s argument that an ordinarily skilled artisan with a bachelor’s degree would have had two years of experience, whereas Patent Owner’s proposal does not provide a specific number of years. Thus, we determine that a person of ordinary skill in the art would have had a bachelor’s degree and two years of experience in analog circuit design. Nevertheless, the outcome of our decision would be the same under either of the party’s proposals.” slip op. at 8

    • Prior constructionPrior construction adoptedDecided for petitioner

      “Because neither party has argued that the district-court constructions should be modified or elaborated for this proceeding, and the constructions appear reasonable, we adopt these constructions for this decision. We also take judicial notice of the district court’s Memorandum supporting the claim construction order. Ex. 3001.9” slip op. at 10

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “We agree with Petitioner that “gm boosting” is the only gm enhancement referred to in the ’074 patent, that the ’074 patent uses the terms “gm enhanced” and “gm-boost” synonymously, and that Patent Owner has failed to point to any credible intrinsic evidence of this alleged distinction. Although, “[i]n the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings, CAE Screenplates Inc. v. Heinrich Fiedler GmbH, 224 F.3d 1308, 1317 (Fed. Cir. 2000), in this case there is evidence to the contrary. In particular, the ’074 patent never refers to “gm enhancement” as a function separate from “gm boosting.” Indeed, the transistors (368, 370, and 382) that Patent Owner identifies as performing the function of “gm enhancement” are disclosed as part of a “gm-boost stage.” Ex. 1001, 5:8–24. Patent Owner’s alleged separation of Figure 3B into distinct “gm boosting” and “gm enhancement” is not consistent with the intrinsic evidence and is based on the conclusory testimony of Dr. Taylor. Thus, based on the evidence of record, we disagree with Patent Owner’s proposed construction distinguishing the terms “gm enhanced” and “gm-boost” in claim 1. Rather, we find persuasive Petitioner’s argument that a person of ordinary skill in the art would have regarded these terms to be synonymous. We need not otherwise construe these two terms to resolve the contested issues in this proceeding. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

      “We find Petitioner’s argument persuasive that a person of ordinary skill in the art would have had reason to follow Ivanov’s teachings to include an enable/disable function in Al-Shyoukh’s biasing circuit to limit that circuit’s standby current for reasons of power-efficiency. Pet. 25–26; Ex. 1002 ¶¶ 67–68. The evidence of record also suggests that an enable/disable function was well known in the art and that it would have been within the level of ordinary skill in the art to add such a function to a biasing circuit, taking into consideration any known tradeoffs. Pet. Reply 17–18; Ex. 1002 ¶¶ 60, 67–68; PO Resp. 13–14 (acknowledging that “any [person of ordinary skill in the art” would attest[ that] engineering is full of tradeoffs” and listing some of the known tradeoffs that “a [person of ordinary skill in the art] would need to consider”). We also disagree with Patent Owner’s argument that Al-Shyoukh, Rincon-Mora, or other references teach away from adding an enable/disable function to Al-Shyoukh. Patent Owner has not pointed to anything in the prior art that criticizes, discredits, or otherwise discourages investigation into the claimed invention. Meiresonne v. Google, Inc., 849 F.3d at 1382.” slip op. at 34

    Patent outcomesUS 9,471,074 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,471,074
Page 1 of 51
← Previous12345…Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.