PTAB
Advanced fields
363 decisions · 390msnewest first
  • PTAB · Oct 14, 2026 · IPR2022-00817 · APJ Zhenyu Yang · IPR · Remand

    On remand, the Board found Travers ’075 did not enable RCR amplification followed by SMRT sequencing and held claims 1–30 not shown unpatentable under the asserted obviousness grounds.

    RulingsRemand decision
    • RemandOther

      “B. Scope on Remand On remand, we are bound by the terms of the Federal Circuit’s mandate. Intell. Pixels Ltd. v. Sony Interactive Ent. LLC, 181 F.4th 1216, 1220 (Fed. Cir. 2026) (“An administrative agency is bound by the mandate of a reviewing court much as a lower court is bound by the mandate of a higher court.”). According to the Federal Circuit, on appeal, Patent Owner “UW argues that ‘Travers ’075 does not enable the sequencing of an RCR concatemer using PacBio’s SMRT sequencing,’ and therefore because paragraph 122 is not enabled, it cannot be relied on for disclosing amplification followed by sequencing.” Paper 50, 14. Because “[t]he Board did not reach this issue,” the Federal Circuit “remand[ed] the case for consideration of this issue by the Board in the first instance.” Id. Thus, consistent with the court’s mandate, we must decide “whether Travers ’075 enabled RCR amplification followed by SMRT sequencing.” Id. at 8.” slip op. at 4

    • BurdenNot shown unpatentable

      “A prior art reference is presumed to be enabled. Amgen, Inc. v. Hoechst Marion Roussel, Inc., 314 F.3d 1313, 1355 (Fed. Cir. 2003) (holding that “a presumption arises that both the claimed and unclaimed disclosures in a prior art patent are enabled”); In re Antor Media Corp., 689 F.3d 1282, 1288 (Fed. Cir. 2012) (extending the presumption to prior art printed publications). A patent owner, however, may present persuasive evidence that the relevant disclosures of a prior art are not enabled and therefore are not pertinent prior art. Amgen, 314 F.3d at 1355; In re Antor Media, 689 F.3d at 1289 (discussing the applicant’s burden to submit rebuttal evidence of nonenablement during prosecution); Apple Inc. v. Corephotonics, Ltd., 861 Fed. App’x. 443, 450 (Fed. Cir. 2021) (“[R]egardless of the forum, prior art patents and publications enjoy a presumption of enablement, and the patentee/applicant has the burden to prove nonenablement for such prior art.”). “[T]here is no absolute requirement for a relied-upon reference to be self-enabling in the § 103 context, so long as the overall evidence of what was known at the time of invention establishes that a skilled artisan could have made and used the claimed invention.” Raytheon Techs. Corp. v. Gen. Elec. Co., 993 F.3d 1374, 1376–77 (Fed. Cir. 2021). But, “if an obviousness case is based on a non-self-enabled reference, and no other prior art reference or evidence would have enabled a skilled artisan to make the claimed invention, then the invention cannot be said to have been obvious.” Id. at 1377.” slip op. at 15

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

      “The Federal Circuit stated that “the elements of the challenged claim are expressly taught by Travers ’075. Travers ’075 discloses performing RCR amplification followed by SMRT sequencing in a single embodiment.” Paper 50, 14. As a result, “no finding regarding a motivation to combine to arrive at those claimed elements is required.” Id. at 9. In addition, it was error to require Petitioner to show that a skilled artisan “would have had a reasonable expectation of success in performing RCR replication of SMRTbell templates followed by SMRT sequencing.” Id. at 13. “Unless remanded by [an appellate] court, all issues within the scope of the appealed judgment are deemed incorporated within the mandate and thus are precluded from further adjudication.” Engel Indus., Inc. v. Lockformer Co., 166 F.3d 1379, 1383 (Fed. Cir. 1999). Therefore, the only issue for us to decide is “whether Travers ’075 enabled RCR amplification followed by SMRT sequencing.” Paper 50, 8.” slip op. at 14

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “polymerase-template complexes in the same ZMW.” Id. (citing Ex. 1035, 39). Citing the Larrea Declaration, Petitioner contends that loading of multiple templates “is easily mitigated.” Id. at 18 (citing Ex. 1033 ¶ 19; Ex. 1035, 39). We are not persuaded by this argument either. Dr. Larrea testifies that one of the two methods to “easily mitigate[]” loading multiple templates into a single ZMW is “bioinformatically trimming the read to only the high-quality region (HQR).” Ex. 1033 ¶ 19. Dr. Larrea, however, provides no support for this testimony. In fact, he does not even explain what a “high-quality region (HQR)” is. We, thus, accord little weight to this testimony. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 (August 24, 2022) (precedential) (holding “conclusory and unsupported” declaration testimony is entitled to little weight).” slip op. at 26

    Patent outcomesUS 10,760,127 not shown unpatentable
    § 103 obviousness
    Patents in suitUS 10,760,127
  • PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

    Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for patent owner

      “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

    • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

      “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

      “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

    Patent outcomesUS 11,844,921 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 11,844,921
  • PTAB · Aug 13, 2026 · IPR2025-01531 · APJ Zhenyu Yang · IPR · Final written decision

    Claims 1, 3–6, and 8–14 are unpatentable as obvious; claims 2, 7, and 15 were not shown unpatentable because the prior art did not establish the claimed drug sequence.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner states that, for purposes of this proceeding, it does not dispute Petitioner’s proposed definition of a POSA. PO Resp. 8. Based on the entirety of the trial record, we adopt Petitioner’s proposed definition of a POSA’s skill level because it is consistent with the skill level reflected in the disclosures of the ’552 patent and prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “We decline to discount Dr. Oberstein’s opinion based on the alleged conflict of interest and bias. Dr. Oberstein testified that the consulting fees he receives from Patent Owner reflect a small fraction of his income. Ex. 1210, 402:21–403:9. We also agree with Patent Owner that an oncologist prescribing an FDA-approved regimen does not evince bias. See Sur-reply 23; see also Ex. 1206, 49 (showing NALIRIFOX is a category 1, NCCN-preferred first-line therapy for metastatic pancreatic cancer), 69 (explaining category 1 is based upon high-level evidence). Petitioner also contends that Dr. Oberstein “offers conclusory opinions,” “fails to properly apply the law, continues to look at each reference in isolation, refuses to acknowledge logical suggestions in the art, and imports new limitations into the claims.” Reply 3–4. We evaluate each piece of evidence, including Dr. Oberstein’s opinion, as it relates to our substantive patentability analysis, and accord it proper weight.” slip op. at 9

    • ExcludeMotion to exclude, deniedDenied

      “Petitioner, as the moving party, bears the burden of proving that the material sought to be excluded is inadmissible under the Federal Rules of Evidence. See 37 C.F.R. §§ 42.20(c), 42.62(a); see also Trial Practice Guide (“TPG”)15 § II.K (“A motion to exclude must explain why the evidence is not admissible.”). For the reasons explained below, we deny Petitioner’s Motion.” slip op. at 17

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

      “only on a ground that could be raised under section 102 or 103 and only on the basis of prior art consisting of patents or printed publications.” 35 U.S.C. § 311(b). Whether a reference qualifies as a “printed publication” involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is publicly accessible upon a satisfactory showing that such document has been disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence can locate it. Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350–51 (Fed. Cir. 2008). Conroy was published on May 12, 2011. Ex. 1003, 1. Conroy refers to Conroy Protocol (Ex. 1004), stating that “[t]he protocol, including the statistical analysis plan, is available with the full text of this article at NEMJ.org.” Ex. 1003, 3. When questioned whether he has “any reason to believe that the protocol would not have been provided on NEJM.org with this text when it was published,” Dr. Oberstein testified that “if they say they provided it, then I think they probably provided it.” Ex. 1210, 165:20–166:2. 17 Alternatively, to the extent necessary, under the circumstances of this case, we waive the requirement of § 42.63(b). See 37.C.F.R. § 42.5(b). In addition, Dr. Ratain testified that “most top journals require that the protocol be submitted at the time of initial submission, and it’s always published alongside any major paper.” Ex. 2073, 42:2–5. According to Dr. Ratain, “[c]ertainly, New England Journal of Medicine does that.” Id. at 42:6–7. We credit the testimony from both Dr. Oberstein and Dr. Ratain on this issue. Accordingly, we find Exhibit 1004 was publicly accessible at the same time Conroy was published. slip op. at 28

    Patent outcomesUS 11,344,552 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,344,552
  • PTAB · Aug 13, 2026 · IPR2025-00505 · APJ Zhenyu Yang · IPR · Final written decision

    Claims 1, 3–6, and 8–14 are unpatentable as obvious over the first § 103 combination; claims 2, 7, and 15 were not shown unpatentable because the art did not support the claimed drug sequence.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner asserts that [t]he person of ordinary skill in the art (POSA) would have been an M.D. and/or Pharm. D who would have completed training in medical oncology, particularly in the field of gastrointestinal (GI) cancers, or a Ph.D. in clinical pharmacology, pharmaceutical sciences, pharmaceutics, and/or drug delivery, also particularly in the field of GI cancers, or their equivalents, along with at least 1-2 years of post-doctoral experience. Pet. 26 (citing Ex. 1002 ¶¶ 44–46). Patent Owner states that, for purposes of this proceeding, it does not dispute Petitioner’s proposed definition of a POSA. PO Resp. 8. Based on the entirety of the trial record, we adopt Petitioner’s proposed definition of a POSA’s skill level because it is consistent with the skill level reflected in the disclosures of the ’552 patent and prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 9

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “We decline to discount Dr. Oberstein’s opinion based on the alleged conflict of interest and bias. Dr. Oberstein testified that the consulting fees he receives from Patent Owner reflect a small fraction of his income. Ex. 1210, 402:21–403:9. We also agree with Patent Owner that an oncologist prescribing an FDA-approved regimen does not evince bias. See Sur-reply 23; see also Ex. 1206, 49 (showing NALIRIFOX is a category 1, NCCN-preferred first-line therapy for metastatic pancreatic cancer), 69 (explaining category 1 is based upon high-level evidence). Petitioner also contends that Dr. Oberstein “offers conclusory opinions,” “fails to properly apply the law, continues to look at each reference in isolation, refuses to acknowledge logical suggestions in the art, and imports new limitations into the claims.” Reply 3–4. We evaluate each piece of evidence, including Dr. Oberstein’s opinion, as it relates to our substantive patentability analysis, and accord it proper weight.” slip op. at 9

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

      “In the DI, the Board stated that the ordinary understanding of a claim reciting a “method of treating metastatic adenocarcinoma of the pancreas” that comprises “administering an antineoplastic therapy to the patient” in order “to treat the metastatic adenocarcinoma of the pancreas” is that the “treatment” would have more than a de minimis therapeutic benefit or efficacy for the patient being treated. DI 14. We, however, rejected the notion that the claims “would require some particular degree of clinical efficacy” because “the level of clinical efficacy is not a claim limitation.” Id.” slip op. at 12

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

      “The parties, however, disagree over whether each recited dose must be the starting dose. Petitioner argues that “claim 1 requires that the method of treatment is a first-line therapy, but does not require that the claimed doses be used as a starting dose.” Paper 51, 1. In contrast, Patent Owner argues that “[t]he specification describes that the recited dose of each drug is a ‘starting’ or ‘initial’ dose.” Paper 50, 2 (citing Ex. 1001, 13:38–45, 30:5–7). For purposes of this Decision, we do not need to resolve this dispute. See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (stating that claim terms need only be construed to the extent necessary to resolve the controversy). As explained below, we agree with Petitioner that, even if claim 1 recites the starting dose for each drug, Petitioner has shown, by a preponderance of the evidence, that the prior art teaches each dose and a POSA would have had a reason to start with the recited doses. See infra Section II.G.3; Paper 51, 3 n.2. Because we find that the prior art teaches or suggests the claimed subject matter even under Patent Owner’s proposed narrower claim interpretation, we need not further construe the disputed claim language.” slip op. at 16

    Patent outcomesUS 11,344,552 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,344,552
  • PTAB · Aug 4, 2026 · IPR2025-00249 · APJ Michael J Fitzpatrick · IPR · Final written decision

    Claims 1 and 4–8 are unpatentable: claims 1 and 4–6 as obvious over Huang2 and Kuo, and claims 7–8 as anticipated by Huang2; claims 2–3 were not shown unpatentable.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for patent owner

      “(“POSITA”) “would be a Ph.D. student with a minimum of two years of experience in their faculty advisor’s laboratory” and would have an understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 20– 21 (citing Ex. 1003 § II.C7). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

      “At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:28–29. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”). Importantly, the Specification does not treat the existence of minor peaks as prerequisites for the existence of major peaks. Indeed, the Specification does not discuss “minor peaks” at all. See generally Ex. 1001. Likewise, none of the claims of the ’227 patent, whether challenged or unchallenged, recites “minor peaks” or any additional peaks beyond the disputed “major peaks.” Id. at 23:30–24:42. Nor does the Specification include an example of FFT analysis results in which the average of the peaks therein is calculated and those higher than the average are identified as major peaks.8” slip op. at 9

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMixed

      “Petitioner has the better position. Huang2 teaches crosslinking and provides a reason for doing so (stability). In particular, Huang2 states: “To better mimic skin ECM, electrospun collagen fibers have been fabricated, however, the rapid degradation and poor mechanical properties determine that either crosslinking or combination with other materials is necessary to obtain a stable scaffold.” Ex. 1005, 1791 (emphasis added). It is true that, in describing work actually carried out, Huang2 states that blending with PCL was performed and does not mention crosslinking. See id. at 1792 (“Nanofibrous matrices of PCL and Collagen at a weight ratio of 3:1 were fabricated using electrospinning as previously described.”). However, the prior art – here, Huang2 – is not limited to that which it describes having created. See In re Mills, 470 F.2d 649, 651 (C.C.P.A. 1972) (“a reference is not limited to the disclosure of specific working examples”); see also In re Lemelson, 397 F.2d 1006, 1009 (CCPA 1968) (“The use of patents as references is not limited to what the patentees describe as their own inventions or to the problems with which they are concerned. They are part of the literature of the art, relevant for all they contain.”); In re Fritch, 972 F.2d 1260, 1264 (Fed. Cir. 1992) (“It is well settled that a prior art reference is relevant for all that it teaches to those of ordinary skill in the art.”). Huang2 teaches two stabilization methods when using collagen in scaffolds. Huang2 states that one or the other “is necessary to obtain a stable scaffold” (when using collagen), but it does not preclude or teach away from using Patent Owner-cited testimony of Dr. Mikos is not as definitive as Patent Owner suggests; Dr. Mikos’s testimony is that a person of ordinary skill in the art “typically would not have done both.” Ex. 2015 ¶64 (emphasis added). The bottom line is that Huang2 teaches the person of ordinary skill in the art two ways to stabilize scaffolds/matrices comprised of collagen, provides a reason for doing so (stability), and does not teach away from using both. We are persuaded that a “scaffold comprising crosslinked fibers comprising collagen” would have been obvious in view of the cited teachings of Huang2.” slip op. at 33

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “We are not persuaded by Appellant’s citations to either reference. As discussed above, Petitioner’s Ground 1 is premised on a person of ordinary skill in the art altering the native flat sheet structure of Huang2 by rolling it into a jelly-roll structure as taught by Kuo. See Pet. 41 (Beginning its claim 2 arguments with the following: “Claim 1 is obvious for the reasons expressed above in § X.A., supra, which are incorporated herein.”); see also Pet. Reply 17 (“[B]ased on the explicit teaching of Kuo, a POSA would have been motivated to take the electrospun flat scaffold made by the techniques of Huang2, seed it with the desired cells, and roll it to treat a tendon and ligament.” (emphasis added)). Indeed, the paragraphs of Kuo that Petitioner cites for disclosing “scaffold sheets,” explicitly describe rolling them into jelly-roll like structures. See Ex. 1018 ¶7 (stating that “the sheet is spirally contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct”), ¶22 (describing a method comprising “forming a tissue construct by contacting a scaffold sheet of fibrous material with a cell; and rolling the scaffold sheet in a jelly-roll like manner to form a spirally wound tissue construct” and implanting it in a patient). Petitioner fails to argue that that “one or more elongated sheets” recited in claim 2 would encompass the rolled structure of its proposed modification. Nor does Petitioner articulate a claim construction argument that could support such an argument. Petitioner has failed to prove, by a preponderance of the evidence, that claim 2 would have been obvious over Huang2 and Kuo.” slip op. at 42

    Patent outcomesUS 11,318,227 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman · KSR
    Patents in suitUS 11,318,227
  • PTAB · Aug 4, 2026 · IPR2025-00248 · APJ Michael J Fitzpatrick · IPR · Final written decision

    Claims 1–3 and 5–12 are unpatentable as anticipated by Huang2; claim 4 is unpatentable as obvious over Huang2 and Kumbar. Lee grounds failed.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “understanding of “electrospinning fibers, including for tissue engineering, tissue engineering techniques, and using/performing FFT analysis.” Pet. 18– 19 (citing Ex. 1003 § II.C5). Patent Owner does not dispute Petitioner’s proposal but specifies the set of disciplines within which the Ph.D. would have been earned, namely “bioengineering, chemical engineering, mechanical engineering, or a related engineering discipline.” PO Resp. 5–6. We adopt and apply Petitioner’s proposal as clarified by Patent Owner regarding the Ph.D. discipline.” slip op. at 7

    • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

      “A patentee “may choose to be his own lexicographer and use terms in a manner other than their ordinary meaning, as long as the special definition of the term is clearly stated in the patent specification or file history.” Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (citing Hoechst Celanese Corp. v. BP Chemicals Ltd., 78 F.3d 1575, 1578 (Fed. Cir. 1996)); see Markman v. Westview Instruments, Inc., 52 F.3d 967, 980 (Fed. Cir. 1995) (en banc) (“[A]ny special definition given to a word must be clearly defined in the specification.”), aff'd, 517 U.S. 370 (1996); CCS Fitness, Inc. v. Brunswick Corp., 288 F.3d 1359, 1366 (Fed. Cir. 2002). “[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.” Bell Atlantic Network Services, Inc. v. Covad Communications Group, Inc., 262 F.3d 1258, 1268 (Fed. Cir. 2001). Among the criteria to consider in whether the patentee acted as a lexicographer to define a claim term include (a) whether the patent specification included the statement in question under a section for marks, (c) whether the sentence uses the term “refer to,” which generally “conveys an intent for [that sentence] to be definitional,” and (d) whether there are other non-limiting terms (e.g., “for example,” or “include”) that contradict a definitional intent. Alnylam Pharms., Inc. v. Moderna, Inc., 138 F.4th 1326, 1333 (Fed. Cir. 2025) (alteration in original). At the outset, we agree with Patent Owner that the Specification purports to define “major peaks” in the following sentence: “The ‘major peaks’ herein refer to peaks higher than the average of the peaks in the result.” Ex. 1001, 13:6–7. We determine that this language satisfies at least two of the criteria set forth in Alnylam. Specifically, the sentence at issue sets out “major peaks” in quotation marks, and then uses the term “refers to” to explain what qualifies as major peaks. That is not the end of the inquiry, however, as we find there is still some ambiguity as to whether the patentee intended to define “major peaks” so as to require so-called “minor peaks” in the claimed invention. See Bell Atlantic, 262 F.3d at 1268 (“[T]he intrinsic evidence must ‘clearly set forth’ or ‘clearly redefine’ a claim term so as to put one reasonably skilled in the art on notice that the patentee intended to so redefine the claim term.”).” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “As discussed above, we agree with Patent Owner that the sentence it cites from the Specification of the ’223 patent bears sufficient hallmarks of lexicography. However, the Specification nonetheless lacks any indication that so-called “minor peaks” are a necessary component of the claimed invention. “Although it is firmly settled that an applicant may act as a 9 Figure 8B does not contain “major peaks” despite clearly depicting two “peaks higher than the average of the [three or possibly four] peaks in the result” because none of the peaks is a reflection of fiber alignment. 10 After presenting claim construction arguments based on Ayres 2008, Patent Owner confusingly states: “Finally, whether Ayres-2008 supports [Patent Owner’s] construction is irrelevant.” PO Sur-Reply 5 (emphasis added). definition that is contrary to the ordinary meaning of a claim term unless it communicates a deliberate and clear preference for this alternative definition.” Kumar v. Ovonic Battery Co., 351 F.3d 1364, 1368 (Fed. Cir. 2003). There is no indication that the patentee sought to require “minor peaks” within the scope of the claimed invention. Nor are we persuaded that a person of ordinary skill in the art would readily understand the scope of the term “major peaks” to require non-major peaks. We interpret the Specification’s statement that “‘major peaks’ herein refer to peaks higher than the average of the peaks in the result” (Ex. 1001, 13:6–7) to be teaching a person of ordinary skill in the art how to identify or discern “major peaks,” which indicate a principal axis of alignment, from any non-major peaks, which would be caused by something else. We conclude that a person of ordinary skill in the art would consider “major peaks” as used in the ’223 patent as referring to peaks that reflect the sole axis or primary axis of fiber alignment. See, e.g., id. at code (54) (“ALIGNED FIBER AND METHOD OF USE THEREOF”), code (57) (“A scaffold comprising an aligned fiber.”), 1:6–7 (“The invention relates to an aligned fiber and method of use thereof.”), 1:11–12 (“The invention relates to a scaffold comprising an aligned fiber.”), 13:16–17 (“Alignment of the fibers in the scaffold may be measured by a fast Fourier transform (FFT) analysis.”). This would certainly include peaks materially higher than the average of the peaks in the result, but it would not be limited to situations involving peaks of different heights or require so-called minor peaks. Based on the totality of the evidence before us, we do not construe the claims to require non-major peaks.” slip op. at 16

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

      “Petitioner argues that, for the aligned sample, a major peak occurs at about 90° as identified by Petitioner’s annotation (red arrow). Pet. 30–31. As support, Petitioner directs us to Huang2’s explicit description of what the peak indicates, namely that “[t]he narrow peak of the normalized intensity values in anisotropic [aligned] matrices (Figure 1C) indicated that PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 31 (alterations in original) (quoting Ex. 1005, 1794). Patent Owner disputes that the illustrated peak is a major peak solely based on the lack of any lesser peaks. See PO Resp. 13 (“[T]he height of the sole peak is identical to—not higher than—the average height of the peaks in the result.”). As discussed above, however, we do not construe “major peaks” as requiring the existence of non-major peaks. We find that the illustrated peak in the Aniso plot of the FFT analysis results (Figure 1C) is a major peak within the meaning of the claim. The evidence in support of this finding is overwhelming. First, the term “Aniso” as used in Huang2 refers to fibers “with alignment.” Ex. 1005, 1792. Huang2 describes fabricating such matrices of aligned fibers with electrospinning, the same method used to impart alignment in the ’223 patent. Id. at 1791–92. Huang2 visually confirms that the fibers in fact are aligned via scanning electron microscopy. Id. at Fig. 1B. Further, Huang2 explicitly states that the peak illustrated in the Aniso plot of the FFT analysis results (Figure 1C) is caused by the fact that the “PCL/Coll nanofibers aligned along a single axis (Fig. 1B).” Id. at 1794. This is precisely what electrospinning may yield aligned fibers and images of aligned fibers will yield FFT results with major peaks. Ex. 1001, 2:18–19, 4:46–60, 13:16–26. Additionally, Huang2 itself considers the peak illustrated in the Aniso plot of the FFT analysis to be significant, stating: “In contrast [to the Aniso plot], the lack of a significant peak for the fibers collected on a stationary surface [(i.e., without electrospinning)] demonstrated no preferred fiber orientation in the isotropic matrices” (i.e., the Iso plot). Ex. 1005, 1794. Indeed, the asserted major peak in the Aniso plot shown in Huang2’s Figure 1C is higher than any other data point on the plot. For these reasons, we find the peak to be a major peak.15 Petitioner acknowledges that Figure 1C only reports its results” slip op. at 32

    Patent outcomesUS 10,137,223 unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Markman
    Patents in suitUS 10,137,223
  • PTAB · Jun 9, 2026 · IPR2025-00289 · APJ Timothy G Majors · IPR · Final written decision

    Claims 1–15 are unpatentable: claims 1–15 under Grounds 2 and 3, and claim 10 under Ground 4; Ground 1 did not establish unpatentability.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “We have construed the “filament” term in multiple related proceedings and agreed with Patent Owner that the claimed filament requires flexibility. See Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. Specifically, we determined that the evidence supports Patent Owner’s position that “a POSA would have understood the plain and ordinary meaning of the claimed ‘filament’ as a flexible length of material (e.g., one or more string(s), wire(s), tape(s)).” See, e.g., Ex. 1050, 23. We maintain that construction in this Decision for the reasons given by Patent Owner (see PO Resp. 24–32; PO Sur-reply 6–8), we disagree with Petitioner’s argument to the contrary (Pet. Reply 27–31), and we incorporate our analysis concerning the meaning of the filament term from the related proceedings identified above, which applies equally here.13 Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. The parties agreed at the oral hearing that there is no additional argument or evidence 13 Although the ’005 patent is not directly related to the patents at issue in the 1157 and 156 IPRs, the ’519 Application that the ’005 patent purports to incorporate for providing all relevant disclosures about the filament term is a parent application to the challenged patents in the 1157 and 156 IPRs (see supra n.3). SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.”) (internal quotation marks omitted). We also construed the filament term consistently in other ongoing proceedings on related patents. See, e.g., Ex. 1045 (Institution Decision in the 728 IPR), 12–18; Ex. 1046 (Institution Decision in the 989 IPR), 13–21. already addressed in those related matters. Tr. 6:13–23, 23:19–26.” slip op. at 16

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “B. Level of Ordinary Skill in the Art Petitioner contends that the person of ordinary skill in the art (“POSA”) in August 2018 “would have had an undergraduate degree in mechanical engineering or a related engineering discipline and 2–4 years of catheter design experience.” Pet. 17 (citing Ex. 1003 ¶ 35). Although Patent Owner states that it “disagrees” with Petitioner’s POSA definition, Patent Owner nevertheless applies that definition in this case. PO Resp. 32–33; see Tr. 22:23–23:5 (Patent Owner is “not disputing” Petitioner’s definition, asserting the definition “doesn’t make any difference in this case”).” slip op. at 13

    • Expert testimonyPatent owner expert creditedPetitioner expert creditedMixed

      “We credit Dr. Zalesky’s interpretation of Schaffer on whether the POSA would have understood Schaffer as describing rigid actuating members. Dr. Zalesky testifies, for example, that a POSA would have understood from Schaffer’s disclosures about the actuating members being “machined” from metal or plastic, that such actuating members would be rigid. Ex. 2026 ¶ 101 (explaining “machining is a manufacturing process in which the desired part . . . is created using the controlled removal of bulk material” to produce a “rigid material”); Ex. 1005 ¶ 82 (“The actuating member 55 and the actuating button 261 is machined from aluminum” and “[i]n another example, the actuating member 55 and the actuating button 261 are machined from plastic”); Ex. 2026 ¶¶ 102–103 (testifying the disclosed valve assembly technique in Schaffer (Ex. 1005 ¶ 83) also indicates that “rigid” actuating members are used). Mr. Thornton opines (without citation to any persuasive supporting disclosure) that a POSA “would have understood that Schaffer’s U-shaped actuating members would have preferably been formed from a thin, flexible material.” Ex. 1003 ¶ 113. But, at deposition, Mr. Thornton conceded that machined plastics and aluminum, like disclosed in Schaffer, are rigid. Ex. 2005, 168:2–6 (“Q. And you said that plastic that would be machined would be rigid, correct? A. I think that’s a fair statement.”). Although Mr. Thornton opines that Schaffer’s actuating members would “preferably”” slip op. at 29

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableUnpatentableMixed

      “For the reasons above, Petitioner has not established that the claimed “filament” is disclosed in the combination of Garrison and Schaffer and, thus, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Garrison and Schaffer. Petitioner’s challenge to independent claim 10 (and the claims that depend from claim 1 and claim 10) fails for similar reasons. Each of the challenged claims requires a “filament” and, given our construction of that term and our findings above that Schaffer does not teach or suggest the claimed filament, Petitioner has not proved by a preponderance of the” slip op. at 31

    Patent outcomesUS 11,554,005 unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 11,554,005
  • PTAB · May 26, 2026 · IPR2025-00425 · APJ Kristina M Kalan · IPR · Remand

    The Board denied institution of IPR2025-00425 because it instituted the earlier-considered IPR2025-00424 challenging the same patent.

    RulingsRemand decision
    • RemandOther

      “Request for Director Review. See Paper 35; IPR2025-00424, Paper 35. The request was denied without prejudice and the cases were remanded to the Board to “allow discovery, narrowly tailored to resolve the RPI and privity issues.” Paper 41, 4. Following such discovery, we were instructed to “then determine on the full record whether Petitioners have met their burden of demonstrating that the Petitions are not time-barred under § 315(b), applying the framework set forth in Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242– 44 (Fed. Cir. 2018).” Id. A later-issued Order Supplementing Director Review Decision instructed that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging” the ’225 patent. Paper 64, 3. Concurrently herewith, we issue a decision in IPR2025-00424 finding that Petitioner has met its burden of demonstrating that the Petition in that case is not time-barred under 35 U.S.C. § 315(b).” slip op. at 3

    • Other 314aInstitution denied discretionary otherInstitution denied

      “In connection with the ’225 patent, Petitioner filed two petitions requesting inter partes review: the petition in this proceeding (IPR2025- 00425), and the petition in IPR2025-00424. In this proceeding and in IPR2025-00424, Petitioner filed an Explanation regarding the necessity of multiple petitions. Paper 2; IPR2025-00424, Paper 2. Petitioner requested that, “if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00424 . . . before IPR2025-00425.” Paper 2,” slip op. at 2

    Discretionary denial
    Patents in suitUS 10,589,225
  • PTAB · May 20, 2026 · IPR2025-00423 · APJ Zhenyu Yang · IPR · Institution

    The Board denied institution of IPR challenging claims 1–4 and 6–29 because it instituted the ranked IPR2025-00422 under the Director’s instruction to maintain at most one IPR.

    RulingsInstitution decision
    • Parallel petitionsInstitution denied discretionary otherDenied

      “Paper 34. Birchtech Corp. (“Patent Owner”) filed a Request for Director Review in each case. See Paper 40; IPR2025-00422, Paper 39. The Director denied the request without prejudice in each case and remanded the cases to the Board to “allow discovery, narrowly tailored to resolve the RPI and privity issues.” Paper 49, 4. The Director later issued an Order Supplementing Director Review Decision in each case, instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging” the ’430 patent. Paper 72, 3.” slip op. at 2

    Discretionary denial
    Patents in suitUS 10,668,430
  • PTAB · May 18, 2026 · IPR2025-00278 · APJ David Cotta · IPR · Institution

    The Board denied institution of Berkshire Hathaway Energy Company and PacifiCorp’s petition because it had instituted the earlier-filed IPR2025-00274 challenging the same patent.

    RulingsInstitution decision
    • PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner

      “request from Patent Owner for Director Review, finding that Patent Owner introduced “evidence sufficient to put RPI and privity at issue” and remanding with instructions to “allow discovery, narrowly tailored to resolve the RPI and privity issues” including “at least materials sufficient to clarify the evidence the Board found to be ‘ambiguous’ and to avoid the need for the Board to ‘speculate as to the nature of the redacted material.’” Paper 57 (Decision on Request for Director Review). The Director instructed that after allowing such discovery, we “should then determine on the full record whether Petitioners have met their burden of demonstrating that the Petitions are not time-barred under § 315(b), applying the framework set forth in Worlds Inc. v. Bungie, Inc., 903 F.3d 1237, 1242–44 (Fed. Cir. 2018). Concurrently herewith, we issue a decision in IPR2025- 00278 finding that Petitioner has met its burden of demonstrating that its Petition is not time-barred under 35 U.S.C. § 315(b).” slip op. at 2

    • Other 314aInstitution denied discretionary otherInstitution denied

      “Review Decision instructing that “if the Board determines that Petitioners met their burden to identify all RPIs in the Petitions, then the Board should maintain at most one IPR challenging each of the ’114 patent, the ’517 patent, the ’430 patent, and the ’225 patent.” Paper 79, 3. Together with its Petition in this proceeding and the proceeding in IPR2025-00274, Petitioner filed an Explanation Regarding the Necessity of Multiple Petitions. Paper 2 (“Explanation”); IPR2025-00274, Paper 2. In the Explanation, Petitioner “request[s] that, if the Board uses its discretion to institute the Petitions, the Board consider the merits of IPR2025-00274 . . . before IPR2025-00278.” Explanation, 3. Further to Petitioner’s request, we first considered the merits of IPR2025-00274. For the reasons discussed in our concurrently issued decision in IPR2025-00274, we institute inter partes review on the grounds set forth in the Petition in IPR2025-00274. Further to the Director’s instruction that we “maintain at most one IPR challenging . . . the ’114 patent,” and the Petitioner’s request that we consider the merits of IPR2025-00274 before IPR2025-00278, we deny institution of the Petition in this proceeding.” slip op. at 3

    Discretionary denial
    Patents in suitUS 10,343,114
Page 1 of 37
← Previous12345…Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.