PTAB
Advanced fields
1,175 decisions · 500msnewest first
  • Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
    PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

    Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

    RulingsFinal written decision
    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

      “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

    • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

      “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

    Patent outcomesUS 11,998,854 mixed
    Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
    Patents in suitUS 11,998,854
  • Medivis, Inc. v. Novarad Corp.Some claims unpatentable
    PTAB · Oct 1, 2026 · IPR2023-00042 · APJ Scott Raevsky · IPR · Remand

    Claims 1–6, 11, and 20 are unpatentable as obvious over Doo and Amira; claims 12–19 were not shown unpatentable because the asserted tissue properties were not shown in Amira.

    RulingsRemand decision
    • RemandOther

      “Federal Circuit. The court issued its decision in Medivis, Inc. v. Novarad Corp., No. 2024-1794, 2026 WL 587294 (Fed. Cir. Mar. 3, 2026) (“Medivis”) (Paper 40),1 affirming-in-part, reversing-in-part, and remanding our Final Written Decision (Paper 35) for further proceedings. In its opinion, the Federal Circuit reversed our “determination of no motivation to combine Doo and Amira” and remanded for further proceedings to evaluate whether claims 1–6 and 11–20 (“the Remanded Claims”) of U.S. Patent No. 11,004,271 B2 (“the ’271 patent,” Ex. 1001) are unpatentable in view of Petitioner’s obviousness challenge over Doo and Amira. Medivis, slip op. at 9–10. We have jurisdiction under 35 U.S.C. § 6(b). We issue this Final Written Decision on Remand pursuant to 35 U.S.C. §§ 144, 318 and 37 C.F.R. § 42.73 in an inter partes review involving Medivis, Inc. (“Petitioner”) and Novarad Corp. (“Patent Owner”). For the reasons discussed below, after considering the entirety of the record in light of the Federal Circuit’s directives in Medivis, we hold that Petitioner has demonstrated, by a preponderance of the evidence, that claims 1–6, 11, and 20 are unpatentable; however, Petitioner has not demonstrated, by a preponderance of the evidence, that claims 12–19 are unpatentable.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “We adopt Petitioner’s proposed level of skill, except that we excise part of Petitioner’s definition to produce the following modified version: 4 Throughout this decision, we eliminate the parties’ italicization of reference names from quotations without noting “emphasis omitted.” 5 Doo, WO 2015/164402 A1, published October 29, 2015 (Ex. 1008). 6 Excerpt of Amira 5 User’s Guide, title through Chapter 2 (Visual Imaging 2009) (Ex. 1005). engineering, or a related field with several years of experience in the design, development, and study of augmented reality devices and . . . familiarity with conventional medical imaging data and visualization of data for medical procedures . . . . Our edit removes the alternative of “working with a team including someone with such familiarity” because one’s role in a team may be tangential to their personal experience with medical imaging. Regardless, had we adopted Petitioner’s original definition, our decision would not have changed.” slip op. at 6

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “We agree with Petitioner that the term “3D slices” has no apparent connection to the phrase “direct volume rendering.” Patent Owner’s argument appears to be that DVR “requires an image of the entire anatomical volume that is neither feature-specific nor segmented, [which] would seemingly require that all inner layers be displayed.” Reply 4; see Sur-reply 6–10 (not disputing Petitioner’s characterization). But, as Petitioner notes, the specification directly undermines this by teaching “display [of] a slice of the 3D data instead of a volume of the 3D data.” See Reply 4 n.2 (quoting Ex. 1001, 5:34–35). In other words, to the extent DVR would depict an image of the entire anatomical volume, displaying 3D slices “instead of a volume of the 3D data” implies the opposite of DVR. Even if “3D slices” somehow implied DVR, Patent Owner’s position is still untenable. Claim 1 does not recite “3D slices.” Instead, claim 1 recites “3D data” and “inner layers.” Ex. 1001, 18:54–65. Patent Owner fails to clarify the relationship between “slices,” “3D data,” and “layers,” and its expert even admits that slices and layers are two different things. See PO Resp. 13; Ex. 1022, 32:7–16 (agreeing that the words “slice” and “layer” are not “synonyms”), cited in Reply 4. We also agree with Petitioner that dependent claim 3 distinguishes slices and layers by reciting “slices of the projected inner layer.” Reply 4 (quoting Ex. 1001, 19:3–10). Thus, even if 3D slices somehow implied DVR, the language of claim 1 does not support limiting the claim this way.” slip op. at 12

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

      “The determination of whether a document was publicly accessible “involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). For instance, courts routinely rely on the Wayback Machine to determine when a reference was first made available to the public. Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021) (“District courts have taken judicial notice of the contents of webpages available through the Wayback Machine ‘as facts that can be accurately and readily determined from sources whose accuracy cannot reasonably be questioned.’”). We disagree with Patent Owner’s argument that “Medivis cannot rely on additional prior art”—Exhibits 1023 and 1024—“that was submitted after its Petition to carry its burden without leave from the Board.” Sur-reply 4. As Patent Owner did not file a motion to exclude these exhibits, we decline Patent Owner’s invitation to disregard them. We also find Petitioner’s Reply argument proper because it directly responds to Patent Owner’s contention that Petitioner did not prove the public accessibility of Amira. See Chamberlain Grp., Inc. v. One World Techs., Inc., 944 F.3d, 919, 925 on issues previously raised.”). Petitioner’s Reply argument appropriately elaborates on the Petition’s contention that Amira was publicly accessible. Patent Owner also does not dispute the substance of Petitioner’s evidence. For example, Patent Owner does not address the substance of Mr. Frank-White’s declaration. We find that this evidence, including Mr. Frank- White’s declaration testimony, persuasively supports the public availability of Amira as of the date shown in the Wayback Machine URL. See Ex. 1024.” slip op. at 22

    Patent outcomesUS 11,004,271 mixed
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips
    Patents in suitUS 11,004,271
  • PTAB · Oct 1, 2026 · PGR2026-00035 · APJ Robert L Kinder · PGR · Adverse judgment

    The Board entered adverse judgment against Patent Owner for abandoning the contest and canceled the sole challenged claim.

    RulingsAdverse judgment
    • Adverse judgmentAdverse judgmentGranted

      “Pursuant to our rules, “[a]ctions construed to be a request for adverse judgment include . . . [a]bandonment of the contest.” 37 C.F.R. § 42.73(b)(4). Our prior order warned that a failure to respond would be construed as an abandonment of the contest under 37 C.F.R. § 42.73(b)(4), and that entry of judgment adverse to Patent Owner and cancellation of the challenged claim may follow. Show Cause Order, 2. Because Patent Owner did not respond by the September 15, 2026, deadline and has not entered an appearance in this proceeding, we determine that Patent Owner has abandoned the contest. Under these circumstances, we enter judgment adverse to the Patent Owner and cancel the challenged design claim.” slip op. at 2

    None
  • PTAB · Jun 11, 2026 · IPR2025-00232 · APJ Miriam L Quinn · IPR · Final written decision

    The Board held that Petitioner did not prove any challenged claims of the ’207 patent unpatentable under the Strub, Woo, Nagai, and Gleissner obviousness ground.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

      “in these respects. The preambles of claims 17 and 59 recite the “audio device wearable by a user for storing locally generated audio.” There is neither mention of “multi-track” audio in the claim, nor is the audio device limited to capturing a single source of sound, such as a single performer. Accordingly, we are not persuaded that the ’443 and ’207 patent claims support the limited scope that Patent Owner urges for the term “locally generated audio.” None of Patent Owner’s citations to the specification define or require that the “locally generated audio” correspond to audio generated only by a single performer. See, e.g., 230 IPR, Ex. 1001, 8:59−62 (stating that the local audio input device “may be worn by the performer and connects to local audio device 102 at local audio input device port 314”). Patent Owner’s argument that the specification “teaches a single creator/performer per local audio device” is well-taken, but the teachings do not indicate the intent to exclude other sounds from being captured at the local audio device (or indicate how the device would prevent the capture of other sounds, such that the audio would be “isolated” as Patent Owner contends). See 230 Sur-Reply 10 (citing 230 IPR, Ex. 1001, 4:28−32, 10:29−34, and Insituform Techs., Inc. v. Cat Contr., Inc., 99 F.3d 1098, 1105 (Fed. Cir. 1996) (“[C]laim 1 refers to ‘a cup’ and ‘the cup’ repeatedly, suggesting that only one cup is involved . . . . [N]either the specification nor the drawings disclose the use of more than one cup.”)). For instance, the specification describes that the “independent track of audio is received from one of the performer’s local audio device 102.” 230 IPR, Ex. 1001, 10:33−34. Thus, in this description the audio track corresponds to the audio captured by a particular audio device—which was worn by the performer— but does not limit that captured audio to only sounds made by the performer. As to the “local audio data” term, Patent Owner argues that “audio data” means “mono or stereo audio files created from independent, isolated locally generated audio files, such files suitable for creation of a multi-track audio file.” 230 PO Resp. 9−10 (citing Ex. 2140 ¶¶ 131, 134). This argument is unsupported by the claim language or specification. The claim does not require the creation of audio files, much less a “multi-track audio file.” The specification describes storing audio files in memory without the specificity that Patent Owner urges we adopt. See 230 IPR, Ex. 1001, 13:1−14. Accordingly, we are not persuaded by Patent Owner’s proposed construction of “local audio data.” Rather, we understand “audio data” to have a plain and ordinary meaning, such as the one given to the term by the District Court in the underlying litigation. 230 IPR, Ex. 1037, 10. We adopt the District Court’s construction of “audio data” to mean “data comprising audio signals in digital form.” Id. This finds support in the specification as the audio is described as being converted into digital audio and stored in a file. See 230 IPR, Ex. 1001, 13:1−14. Our conclusion is consistent with the plain and ordinary meaning of the term as that would be understood by a person of ordinary skill in the art, and we see no reason to deviate from the conclusions of the District Court on this point.” slip op. at 20

    • Prior constructionPrior construction adoptedDecided for petitioner

      “data” means “mono or stereo audio files created from independent, isolated locally generated audio files, such files suitable for creation of a multi-track audio file.” 230 PO Resp. 9−10 (citing Ex. 2140 ¶¶ 131, 134). This argument is unsupported by the claim language or specification. The claim does not require the creation of audio files, much less a “multi-track audio file.” The specification describes storing audio files in memory without the specificity that Patent Owner urges we adopt. See 230 IPR, Ex. 1001, 13:1−14. Accordingly, we are not persuaded by Patent Owner’s proposed construction of “local audio data.” Rather, we understand “audio data” to have a plain and ordinary meaning, such as the one given to the term by the District Court in the underlying litigation. 230 IPR, Ex. 1037, 10. We adopt the District Court’s construction of “audio data” to mean “data comprising audio signals in digital form.” Id. This finds support in the specification as the audio is described as being converted into digital audio and stored in a file. See 230 IPR, Ex. 1001, 13:1−14. Our conclusion is consistent with the plain and ordinary meaning of the term as that would be understood by a person of ordinary skill in the art, and we see no reason to deviate from the conclusions of the District Court on this point.” slip op. at 21

    • Obviousness (§103) › Objective indicia / secondary considerations › Skepticism / industry praiseObjective indicia with nexusDecided for patent owner

      “1. Industry Praise: Academy and Emmy Awards Patent Owner argues that it “revolutionized [the] industry with the” slip op. at 97

    • Obviousness (§103) › Objective indicia / secondary considerations › Long-felt need / failure of othersDecided for patent owner

      “2. Long-Felt Need Patent Owner further proffers the testimony of two witnesses as” slip op. at 104

    Patent outcomesUS 10,276,207 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · Graham
    Patents in suitUS 10,276,207
  • PTAB · Jun 11, 2026 · IPR2025-00230 · APJ Miriam L Quinn · IPR · Final written decision

    The Board determined that Petitioner had not shown any challenged claims of the ’443 or ’207 patents unpatentable, including under the asserted obviousness grounds.

    RulingsFinal written decision
    • Expert testimonySkill level petitioner adoptedOther

      “E. Level of Ordinary Skill in the Art Based on the argument and evidence presented in the Petition and Patent Owner’s preliminary response, we determined, as stated in our Decision on Institution, that “a person of ordinary skill in the art would have had a Bachelor’s degree in electrical engineering and two or more years of experience working with audio and wireless communications systems.” 230 Dec. on Inst. 16; 232 Dec. on Inst. 22−23. Patent Owner reiterates its position that a person of ordinary skill the art would have had “a bachelor’s degree in electrical engineering or a related subject and two to five years’ experience working with multi-track audio and wireless communications systems in the professional performance industry.” 230 IPR, PO Resp. 6−7 (emphasis added) (identical passage in 232 PO Resp. 8). Thus, the dispute centers on whether the level or ordinary skill includes specific work experience with multi-track audio in the professional performance industry. We do not agree that this specific work experience is necessary to the level of ordinary skill in the instant proceedings. In determining whether an invention would have been obvious at the time it was made, we consider the level of ordinary skill in the pertinent art at the time of the invention. Graham v. John Deere, 383 U.S. 1, 17−18 (1966). “The importance of resolving the level of ordinary skill in the art lies in the necessity of maintaining objectivity in the obviousness inquiry.” Ryko Mfg. Co. v. Nu‑Star, Inc., 950 F.2d 714, 718 (Fed. Cir. 1991). The “person of ordinary skill in the art” is a hypothetical construct, from whose vantage point obviousness is assessed. In re Rouffet, 149 F.3d 1350, 1357 (Fed. Cir. 1998). In determining the level or ordinary skill, we may consider various factors including “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC, 57 F.3d 1573, 1579, (Fed. Cir. 1995) (quoting Custom Accessories, Inc. v. Jeffrey-Allan Indus., Inc., 807 F.2d 955, 962 (Fed. Cir. 1986)). Patent Owner’s proposed specificity of work with multi-track audio in a professional performance industry is not supported by the record. First, Patent Owner submits conclusory declaration testimony of James DeFilippis—repeating verbatim, and without any supported reasoning, Patent Owner’s proposed level of ordinary skill. Ex. 2140 ¶ 15. As such, the testimony is not persuasive. Second, Patent Owner’s additional declaration testimony of Jack” slip op. at 12

    • Prior constructionPrior construction adoptedDecided for petitioner

      “data” means “mono or stereo audio files created from independent, isolated locally generated audio files, such files suitable for creation of a multi-track audio file.” 230 PO Resp. 9−10 (citing Ex. 2140 ¶¶ 131, 134). This argument is unsupported by the claim language or specification. The claim does not require the creation of audio files, much less a “multi-track audio file.” The specification describes storing audio files in memory without the specificity that Patent Owner urges we adopt. See 230 IPR, Ex. 1001, 13:1−14. Accordingly, we are not persuaded by Patent Owner’s proposed construction of “local audio data.” Rather, we understand “audio data” to have a plain and ordinary meaning, such as the one given to the term by the District Court in the underlying litigation. 230 IPR, Ex. 1037, 10. We adopt the District Court’s construction of “audio data” to mean “data comprising audio signals in digital form.” Id. This finds support in the specification as the audio is described as being converted into digital audio and stored in a file. See 230 IPR, Ex. 1001, 13:1−14. Our conclusion is consistent with the plain and ordinary meaning of the term as that would be understood by a person of ordinary skill in the art, and we see no reason to deviate from the conclusions of the District Court on this point.” slip op. at 21

    • ExcludeMotion to exclude, deniedDenied

      “irrelevant under Federal Rules of Evidence 401–403. Patent Owner asserts that Petitioner has failed to establish that these documents reflect the understanding of a person of ordinary skill in the art, or that they are consumer-oriented documents, but not technical references or sources for understanding the meaning of claim terms. 230 IPR, Paper 64, 3−4. According to Patent Owner, these exhibits lack a “technical foundation” that establishes the technical meaning of a claim term. Id. We do not agree with Patent Owner as it conflates relevance with sufficiency of evidence to prove a contention on claim construction. Dictionary definitions are often useful when determining a claim term’s plain and ordinary meaning in the context of the specification, and as such are relevant when claim terms are disputed. Phillips, 415 F.3d at 1312. Furthermore, the evidence of record shows testimony as to whether the “Sweetwater” glossary entry for “body pack” would be relevant to the meaning of the term in the “world of wireless performance.” 230 IPR, Paper 67, 4 (citing Ex. 1073 ¶ 42). Patent Owner’s objections are overruled as to relevance.” slip op. at 116

    • BurdenFwd all claims patentableNot shown unpatentable

      “after a full and fair hearing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that any of the challenged claims are unpatentable.” slip op. at 125

    Patent outcomesUS 7,711,443 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · Graham
    Patents in suitUS 7,711,443
  • PTAB · May 22, 2026 · IPR2024-00796 · APJ Iftikhar Ahmed · IPR · Final written decision

    Claims 1–20 are unpatentable as obvious over Nevo and Avitabile, Young and Estabrook, and Young, Estabrook-1988, and Estabrook-1989.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

      “Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). On its face, the language “energy transfer signal” does not specify any restrictions on the type of system in which it is utilized, nor its characteristics. In the context of claims 1 and 11, the “energy transfer signal” is the basis on which the “switch” operates, so as to “sub-sample and transfer energy from a first electromagnetic (EM) signal.” Ex. 1001, 50:63–65, 51:56–58. Accordingly, based on the claim language, the term “energy transfer signal” need only be a signal for operating a switch to sub-sample and transfer energy from an electromagnetic signal. That is its plain and ordinary meaning.” slip op. at 15

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

      “’686 patent broadly includes knowledge and experience as to RF circuit design. See supra § III.B. Petitioner contends that “Nevo’s transceivers [102a/102b] are for Bluetooth and IEEE 802.11,” and that a person of ordinary skill in the art would have understood that both protocols “required down-conversion in their receivers to obtain a baseband signal.” Id. at 35 (citing Ex. 1004, 4:45–50; Ex. 1002 ¶ 118). Nevo’s disclosure would have motivated a person of ordinary skill in the art to look to Avitabile, which provides the circuit level detail for down-converters. See Ex. 1006, Abstract. Avitabile specifically provides circuitry for down-conversion in the s-band frequency range, which is in the range of Bluetooth and IEEE 802.11 (2.4 GHz). Id. at Abstract, Figs. 6, 7. Accordingly, we determine a person of ordinary skill in the art would have been motivated to look to down-converters in the range of frequency needed, and would have been motivated to combine Avitabile’s teachings with those of Nevo, with a reasonable expectation of success.” slip op. at 55

    • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
    Patent outcomesUS 7,483,686 unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 7,483,686
  • PTAB · Mar 4, 2026 · IPR2024-01223 · APJ Garth D Baer · IPR · Final written decision

    Claims 34–37 and 40–46 were not shown unpatentable because Suzuki’s organic barrier layer was not shown to meet the agreed construction of “planarization layer.”

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for patent owner

      “layer of material that planarizes such that the propagation of defects from one layer to another layer can be interrupted and the topography of the underlying layer and/or structure is not reproduced.” PO Resp. 10. According to Patent Owner, we should adopt this construction because the parties agreed to it in a related district court proceeding and it is supported by the intrinsic evidence. Id. at 10–14. Petitioner does not dispute this 1 Japanese Published Application No. H09-245964, Pub. Sep. 19, 1997 (Ex. 1010, “Kijima”) (English translation). 2 US 6,198,217, Pub. Mar. 6, 2001 (Ex. 1012, “Suzuki”). 3 US 6,087,196, Pub. July 11, 2000 (Ex. 1013, “Sturm”). 4 WO 2001/08242, Pub. Feb. 1, 2001 (Ex. 1016, “Duthaler”). 5 Japanese Published Application No. H10-41069, Pub. Feb. 13, 1998 (Ex. 1014, “Fujimori”) (English translation). construction. Paper 33, 6:17–8:1; see Pet. Reply 5. We adopt the parties’ agreed-to construction.” slip op. at 4

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Petitioner argues Suzuki’s organic barrier layer does not reproduce the underlying layer’s/structure’s topography because “Suzuki’s organic barrier layer 20 ‘makes a smooth surface on the relatively irregular surface of the cathode 18.’” Pet. Reply 7 (quoting Ex. 1012, 5:59–67). We disagree. Instead, we agree with Patent Owner that Suzuki’s irregular-surface smoothing describes covering defects, not suppressing the underlying cathode’s topography. PO Sur-reply 5. The smooth-surface passage that Petitioner highlights comes immediately after two sentences describing inevitable “defects,” “pinholes,” and “foreign matter” on the cathode surface and before a sentence describing “ensuring the formation of the layer 22, which is substantially defect-free.” Ex. 1012, 5:52–67. Suzuki’s organic barrier 20 “makes a smooth surface” by covering defects because the defects are the only source of the “irregularity” that Suzuki refers to here. Id. We note Mr. Humphrey’s testimony, which we credit in this regard, that the “defects are created incidentally on the surface of the underlying layer and are generally not considered to be part of the underlying layer’s topography, which is a macroscopic property by design” and that the organic layer is not a planarization layer because it would reproduce the topography of the underlying layer. Ex. 2018 ¶¶ 47–48. Because the parties’ agreed-to construction of “planarization layer” “requires ‘a layer of material that planarizes’ for two distinct functions,” Petitioner’s showing of just one of those functions is insufficient. PO Sur-reply 2.” slip op. at 8

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “G. Level of Skill in the Art Petitioner argues a person of ordinary skill in the art “would have had a bachelor’s degree in Electrical Engineering, Materials Science, or a related field, and at least one year of experience in display technologies” and that “[a]dditional education might compensate for a deficiency in experience, and vice-versa.” Pet. 14–15. Patent Owner does not dispute the level of ordinary skill in the art. We agree with and adopt Petitioner’s proposal as reasonable and consistent with the level of skill reflected in both the prior art and the ’389 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 6

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “which is substantially defect-free.” Ex. 1012, 5:52–67. Suzuki’s organic barrier 20 “makes a smooth surface” by covering defects because the defects are the only source of the “irregularity” that Suzuki refers to here. Id. We note Mr. Humphrey’s testimony, which we credit in this regard, that the “defects are created incidentally on the surface of the underlying layer and are generally not considered to be part of the underlying layer’s topography, which is a macroscopic property by design” and that the organic layer is not a planarization layer because it would reproduce the topography of the underlying layer. Ex. 2018 ¶¶ 47–48. Because the parties’ agreed-to construction of “planarization layer” “requires ‘a layer of material that planarizes’ for two distinct functions,” Petitioner’s showing of just one of those functions is insufficient. PO Sur-reply 2.” slip op. at 9

    Patent outcomesUS 6,949,389 not shown unpatentable
    Claim construction§ 103 obviousness
    Patents in suitUS 6,949,389
  • PTAB · Mar 4, 2026 · IPR2024-01222 · APJ Garth D Baer · IPR · Final written decision

    Claims 34–37 and 40–46 are unpatentable as obvious over the Yamazaki-based and Weaver-based grounds.

    RulingsFinal written decision
    • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner

      “Patent Owner bears the burden of production to establish that its claimed invention is entitled to an earlier priority date for this fact-intensive issue. See In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1375–76 (Fed. Cir. 2016). We agree with Petitioner that the email chain does not support Patent Owner’s conception claim because it “does not discuss depositing a planarization layer, as required by both independent claims.” Pet. Reply 3. Patent Owner asserts that the inventor’s discussion of “PML” (polymer multi-layer) encapsulation in the email chain shows their conception of the claimed planarization layer because the ’389 patent describes that PMLs “‘[t]ypically’ include[e] ‘a planarization layer’ that ‘is provided to give a planar surface’ for deposition of an upper layer,” and “‘address ‘any point defects (i.e. pin holes)’ that might appear in the barrier layer’s surface.” PO Resp. 6 (quoting Ex. 1001, 1:31–37, 1:41–44, 1:56–62). We disagree with Patent Owner for two reasons. First, the challenged patent’s specification does not corroborate that the inventors conceived the claimed planarization before the challenged patent’s priority because it did not exist at the time of the email. Whether the inventors, at the time of filing, considered PMLs to typically include a planarization layer as of the claimed priority date does not support the allegation that they conceived of that same planarization layer more than a year earlier. Moreover, the ’389 patent’s teaching that “[t]ypically, for PML structures, a planarization layer 106 is formed” (Ex. 1001, 1:30–31) shows that the inventors recognized PML structures and planarization layers were distinct because only a subset of PML structures formed planarization layers, even if they do so typically. Thus, the inventor’s discussion of a PML layer in the email chain does not evidence their conception of the claimed planarization layer, as Patent Owner contends. Additionally, even if we were to understand the inventors’ mention of PML encapsulation in the emails, together with the discussion of patterning techniques for an organic layer, as discussing a planarization layer, such discussions are evidence of brainstorming ideas, rather than documenting the path taken with the claimed invention. For instance, the inventors use phrases like “don’t know if this will work,” “these are all just ‘undeveloped’ ideas,” and “looking forward to keep this discussion rolling.” Ex. 2006, 1; see also Ex. 1034, 59:22−59:18. As Petitioner argues, and we agree, these are more theoretical and future-development discussions than an exchange of a definite idea. Pet. Reply 2−3 (citing Hybritech Inc. v. Monoclonal Antibodies, Inc., 802 F.2d 1367, 1376 (Fed. Cir. 1986). For these reasons, we agree with Petitioner that Patent Owner has not” slip op. at 6

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Applicant-admitted prior artDecided for petitioner

      “B. Whether Petitioner Relies on Applicant Admitted Prior Art Patent Owner asserts we should “not consider” Yamazaki-based challenges because Petitioner included Applicant Admitted Prior Art (AAPA) in those grounds. See PO Resp. 16 (citing Qualcomm Incorporated v. Apple Inc., 134 F.4th 1355 (Fed. Cir. 2025)) (holding that AAPA may not be part of the basis for an inter partes review). We disagree. As Petitioner notes, it “utilizes the AAPA in the alternative with Ghosh, to show that it was known to manufacture OLED devices in bulk (which [Patent Owner] does not dispute).” Pet. Reply 9. Because “[t]he Petition identifies disclosures in Ghosh that independently demonstrate the same teachings for which the AAPA is cited,” we agree with Petitioner that it does not improperly rely on AAPA for any of its challenges. Id.” slip op. at 8

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

      “C. Whether Yamazaki, Weaver, and Palanisamy Are Printed Publications under 35 U.S.C. § 311(b) Patent Owner asserts that Yamazaki, Weaver, and Palanisamy do not qualify as printed publications under 35 U.S.C. § 311(b) because they only qualify as prior art under § 102(e). PO Resp. 17. According to Patent Owner, “[e]ven though the Federal Circuit has held that such references are ‘printed publications’ under 311(b), to preserve arguments on appeal, Patent Owner submits that such an interpretation is inconsistent with the plain statutory language, the precedent, and non-public accessibility of an unpublished patent application.” Id. We disagree with this argument because the Federal Circuit has rejected it, as Patent Owner acknowledges. See Lynk Labs, Inc. v. Samsung Electronics Co., 2023-2346, Slip. Op. (Fed. Cir. Jan. 14, 2025).” slip op. at 8

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

      “Yamazaki does not involve multiple devices on a substrate” and Ghosh teaches “non-selective deposition of at least the barrier layer.” PO Resp. 31. We disagree with this argument because it attacks Yamazaki and Ghosh individually, rather than the combination of Yamazaki’s selective deposition and Ghosh’s plurality of devices that Petitioner asserts. See In re Keller, 642 F.2d 413, 426 (CCPA 1981). We also disagree with Patent Owner’s criticism that Petitioner fails to explain why skilled artisans would have ignored Ghosh’s non-selective deposition method for barrier layers on multiple devices. PO Resp. 32. This argument attacks a straw man as Petitioner does not propose modifying Ghosh’s method with Yamazaki’s selective deposition. See Pet. 21–23. Rather, Petitioner proposes modifying Yamazaki’s selective deposition method by applying it to Ghosh’s teaching of encapsulating a plurality of OLED devices. Id. Next, Patent Owner asserts that skilled artisans would not have extended Yamazaki’s single-device fabrication/encapsulation method to a plurality of devices on a substrate because doing so would “multiply defects and errors, drop the yield exponentially, and increase the cost.” PO Resp. 34. Patent Owner asserts that precision/defect problems would be particularly acute when using Yamazaki’s inkjet method to print devices’ electro luminescence layers. Id. at 35–36. We disagree. Even if extending Yamazaki’s method to Ghosh’s multiple devices comes at a cost of potential defects, that tradeoff would not undermine Petitioner’s proffered combination given Petitioner’s articulated benefits outline above, including facilitating manufacturing display panels for OLEDs with improved throughput, improved productivity, and reduced manufacturing costs, as compared to fabricating/encapsulating just a single device. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”). It also does not matter that “inkjet printing yielded devices of half the efficiency than spin coating,” as Patent Owner asserts (PO Resp. 35), because Petitioner does not need to show that Yamazaki’s inkjet printing would be the best option for batch fabrication/encapsulation, only that it would was a suitable one from which the prior art did not teach away. See Par Pharm., Inc. v. TWi Pharms., Inc., 773 F. 3d 1186, 1197–98 (Fed. Cir 2014). That is, Petitioner does not need to show that Yamazaki’s inkjet method was an improvement over other known fabrication/encapsulation methods, so long as it was a known fabrication/encapsulation method and skilled artisans would understand that implementing it for a plurality of devices had known advantages over fabricating/encapsulating a single device, which Petitioner identifies. See Pet. 22. We also agree with Dr. Subramanian that skilled artisans would have a reasonable expectation of success in making the proposed combination given similarities between the references (both are directed to encapsulation of an OLED display device with multiple thin-film layers and at least the first encapsulation is selectively deposited) and because “as the ’389 patent admits, in the prior art it was conventional to use batch fabrication to manufacture OLED display devices with thin-film encapsulation.” Ex. 1003 ¶ 86. As Dr. Subramanian explains, a particular advantage of inkjet printing is that it scales well to larger areas and it was known at the time of the ’389 patent that inkjet could be used to print multiple devices on a glass substrate. Ex. 1032 ¶¶ 2, 27–28. Patent Owner’s argument that “Yamazaki’s methods are far from ready for manufacturing” (PO Resp. 34) goes well beyond what is necessary to show that skilled artisans would have had a reasonable expectation of achieving what is claimed. See Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Given Petitioner’s analysis outlined above, we agree with Petitioner that it would have been obvious to skilled artisans to fabricate and encapsulate multiple OLED devices on a substrate using Yamazaki’s ink-jet methods. slip op. at 15

    Patent outcomesUS 6,949,389 unpatentable
    § 102 anticipation§ 103 obviousnesscites KSR
    Patents in suitUS 6,949,389
  • PTAB · Feb 24, 2026 · IPR2024-01256 · APJ Miriam L Quinn · IPR · Final written decision

    Claims 1–6, 10–14, 16, and 17 were not shown unpatentable because Ahn and Chaudhri did not teach or suggest the claimed movement of an object during the gesture.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for patent owner

      “interface objects and, more specifically, the display of user interfaces on applications, in accordance with contacts on the touch-sensitive surface of a display. Ex. 1001, (54), Abstr. Consistent with the scope of the ’727 patent, we find that the level of skill in the art is reflected in a person having a bachelor’s degree in computer science, computer engineering, electrical engineering, human-computer interaction, or a comparable field and at least two years of professional experience working with graphical user interfaces, human-computer interfaces, or equivalents.” slip op. at 6

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Because there is no dispute as to the scope and meaning of these terms, and for consistency with the Decision on Institution, we apply the meaning of the terms “blur” and “distance magnitude” as stated above where applicable. However, we note that our determination does not hinge on the meaning of these terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (only those terms that are in controversy need be construed, and only to the extent necessary to resolve the controversy) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

      “it was “known to utilize ‘cues’ to help the user know what gesture to utilize and whether they are correctly performing the gesture (e.g., graphics such as movable images that help the user visualize the correct gesture and how to complete it successfully).” Pet. 40 (citing Ex. 1005, Abstract, ¶¶ 54, 62, 73). This sentence does not cure the deficiency noted above regarding Petitioner’s reliance on Ahn’s graphic shadow moving with a gesture. Chaudhri is relied on for the proposition that, Ahn’s graphic shadow is “[i]ndeed” a movable image known to give a user a visual cue. Id. But no such “cue” is provided in Ahn by the graphical shadow alone, because there is no movement of that object. The Petition does not present argument that a Chaudhri object is the movable object or how any of Chaudhri’s teachings of movable objects would have suggested to modify Ahn “to thereby move” the graphical shadow.” slip op. at 18

    • Strike new argumentNew argument disregardedDecided for patent owner

      “the theory that Ahn’s graphic shadow moves. Reply 3−4. Petitioner interprets the sentences in Ahn we have analyzed above in conjunction with testimony of Dr. Terveen to argue that temporal descriptions in Ahn make it obvious for a person of ordinary skill in the art to drag in the right direction while continuing to press the graphic 1800. Id. (citing Exs. 1004 ¶¶ 117−119, Ex. 1023 ¶ 10). The Petition, however, relies on an Ahn disclosing a moving graphic shadow according to the embodiment of Figure 18(a), as described in paragraph 118. Petitioner now changes its theory of how Ahn’s graphic shadow would move according to paragraph 119, i.e., that although the graphic shadow is merely pressed (in the embodiment shown in Figure 18(b)) it would also be dragged while pressed. Reply 3. Not only is this a shift from the theory Petitioner presents in the Petition, it is not persuasive. As Patent Owner argues, and we agree, there is no cogent explanation for modifying the graphic shadow embodiment of Figure 18(b), especially in light of Ahn’s disclosure that the graphic shadow disappears when pressed and the menu list is displayed as emerging. Sur-reply 2−3. In other words, Petitioner’s new argument does not account for Ahn’s teaching that the objective of the graphic shadow is merely to notify the user of the start of the gesture, and once that start of the gesture is detected (the press on the graphic shadow), paragraph 119 informs us that there is no longer a need for the graphic shadow—it disappears from the display. Ex. 1004 ¶ 119. The Petition does not offer any argument for a theory in which the gesture of paragraph 119 (the press, not a touch and drag operation) results in graphic 1800 disappearing, while also moving during the disappearance. We are mindful that “[i]t is impermissible within the framework of section 103 to pick and choose from any one reference only so much of it as will support a given position to the exclusion of other parts necessary to the full appreciation of what such reference fairly suggests to one skilled in the art.” Bausch & Lomb, Inc. v. Barnes-Hind / Hydrocurve, Inc., 796 F.2d 443, 448 (Fed. Cir. 1986)). Consequently, we determine that Petitioner’s argument in Reply belatedly relying on the different embodiment of paragraph 119 is improper new argument, and that even if considered it is not persuasive.” slip op. at 20

    Patent outcomesUS 11,740,727 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · Graham
    Patents in suitUS 11,740,727
  • PTAB · Feb 17, 2026 · IPR2024-01261 · APJ Jamie T Wisz · IPR · Final written decision

    Claims 1–20 were not shown unpatentable because the asserted combinations did not teach the claimed predetermined cycle for controlling distal fluid flow.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “(1) a person with a B.S. in engineering or an equivalent field, with two-four years of academic or industry experience in aspiration embolectomy and thrombectomy or comparable industry experience who would, where appropriate, work or consult with others, including a physician, to develop embolectomy or thrombectomy devices; or (2) an interventional neurosurgeon with at least three years of experience developing and/or using medical devices in embolectomy or thrombectomy procedures, and who would, where appropriate, work or consult with others, including an engineer, to develop such a medical device. Pet. 11 (citing Ex. 1005 ¶ 48). Petitioner also contends that, “[a] person with less education but more relevant practical experience, or more relevant education but less practical experience, may also meet this standard.” Id. Patent Owner states that for purposes of its PO Response, it “accepts ¶ 44). We adopt Petitioner’s characterization because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’402 patent and the cited prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “specification explicitly includes sensors similar to those in the prior art in support of their argument that the claimed “predetermined cycle” must not exclude the use of such sensors. Pet. Reply 15 (citing Ex. 1001, 32:55–33:7, 40:66–41:5, 44:9–29). We reviewed the portions of the specification cited by Petitioner. We agree with Patent Owner that one excerpt discussing sensor use appears to be directed to triggering the predetermined cycle rather than causing timing changes during the cycle itself (Ex. 1001, 32:55–66) (describing use of a pressure sensor to “determine when the vacuum channel 3 is clogged by a thrombus and automatically perform the unclogging procedures described herein”), while another excerpt discusses a sensor that Petitioner that the ’402 patent discusses the use of sensors to “tune” the system and that such “tuning” can be done statically (setting the cycle timing in advance) or dynamically (adjusting the timing during the cycle itself). See Ex. 1001, 48:19–49:50. Overall, we find that these disclosures involving sensors demonstrate that sensors may be used in various ways in different embodiments. However, none of these disclosures explicitly discuss the use of sensors in conjunction with a “pre-determined cycle.” Therefore, we find that the ’402 patent specification’s discussion of “sensors” are not particularly informative as to the appropriate construction of a “predetermined cycle” and do not outweigh the other explicit disclosures of “predetermined cycle” in the patent. We next turn to the other intrinsic evidence discussed by the parties — the prosecution history. As discussed by Patent Owner, in the Notice of Allowance, the Examiner found that Garrison did not teach or suggest a “predetermined cycle” because Garrison’s controller “changed the cycle of opening and closing the valves based on feedback from sensors.” Ex. 1004, 86. We acknowledge that the patent applicant filed subsequent comments during prosecution in which they stated that they “do[] not concede that the Examiner’s characterizations of the terms of the claims and the prior art are correct.” Id. at 29. However, we agree with Patent Owner that the importance of the Examiner’s statement in the Notice of Allowance does not rely on it being an express disclaimer (a standard which it does not meet). PO Sur-reply 8. We also considered Petitioner’s contention that the Examiner’s interpretation of Garrison may have been in error (PO Resp. 16); however, even if this were true, the Examiner’s statement still provides helpful insight into how the Examiner was interpreting the term sensors to change the opening and closing of valves during a cycle was not a “predetermined cycle.” Id. at 86. In sum, we find that Patent Owner’s proposed construction is consistent with the usage of the term “predetermined cycle” in the ’402 patent specification and prosecution history. Thus, after considering all of the cited evidence, we construe “predetermined cycle” to mean that “the timing of the sequence of valve operations in the cycle is determined beforehand, i.e., fixed, rather than varying based on feedback after operation begins.”” slip op. at 14

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

      “2. Other Terms The parties also provided proposed constructions for the limitations of “[limited/limiting] to a positive amount of exit flow” and “control[ling] fluid flow in and out from the distal end of the catheter.” See Pet. 15–16; Pet. Reply 1–8; PO Resp. 22–24; PO Sur-Reply 2–6. However, having evaluated the arguments and evidence before us, we determine that construction of these terms is not necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

      “We agree with Patent Owner that neither Petitioner nor Mr. Brown propose any combination of Yang and Mullins that does not include Mullins’s pressure sensor in order “to control fluid flow in and out from the distal end of the catheter.” Indeed, in addressing the “predetermined cycle” limitation, Mr. Brown contends that Mullins discloses a “cycling controller that ‘varies aspiration pressure according to sensed pressure within the catheter lumen.’” Ex.1005 ¶¶ 131–32 (citing, e.g., Ex.1008, 27:40–28:20 (“[a] novel aspect of this pump system is the incorporation of feedback into the pump algorithm in order to produce more effective pressure cycling”)). This use of a sensor to change pressure during a cycle, is not a “predetermined cycle” under our construction. combinations is its discussion of distal end flow control, not for its sensors.” Pet. Reply 17 (citing Ex. 1035 ¶ 83). However, Petitioner’s obviousness grounds rely on the combination of Yang and Mullins, especially with regard to Mullins’s disclosure of “a controller” in order “to control fluid flow in and out.” As discussed above, Mullins relies on the sensor-feedback approach in order to control flow and we find that Petitioner has not presented persuasive evidence of how the combined disclosures of Yang and Mullins would control flow without using Mullins’s sensor feedback approach. See W.L. Gore & Assocs., Inc. v. Garlock, Inc., 721 F.2d 1540, 1550 (Fed. Cir. 1983) (error to “consider[] … references in less than their entireties, i.e., in disregarding disclosures in [them] … that diverge from and teach away from the invention”). Therefore, we determine that Petitioner has not sufficiently shown that the combination of Yang and Mullins discloses or renders obvious “a controller configured to open and close the vacuum valve and the vent valve in a predetermined cycle to change a level of vacuum at the distal end of the catheter and to control fluid flow in and out from the distal end of the catheter.” Accordingly, having considered the parties’ respective evidence and arguments, we find that Petitioner has not shown by a preponderance of the evidence that claim 1 of the ’402 patent would have been unpatentable as obvious over the combination of Yang and Mullins.” slip op. at 27

    Patent outcomesUS 11,406,402 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,406,402
Page 1 of 118
← Previous12345…Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.