• Clearwater Paper Corporation v. Graphic Packaging International LLCAll claims unpatentable
  PTAB · Sep 23, 2026 · IPR2025-00878 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–3 and 11 are unpatentable as anticipated by Cleveland and obvious over Nakagawa and over Nakagawa combined with Tanner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have at least a bachelor’s degree in mechanical or chemical engineering, materials science, polymer science, or equivalent coursework, at least a year of experience developing paper-based laminates involving the application of polymer coatings to a substrate, and the appropriate industry familiarity with biodegradability standards and degradability techniques [and] . . . [l]ess work experience may be compensated by a higher level of education, such as a master’s degree, and vice versa. Pet. 16 (citing Ex. 1003 ¶ 50). Clearwater’s definition is uncontested, and we apply that definition here, as it accords with the level of skill reflected in the asserted prior art and the problems addressed in the specification of the ’126 patent. C. Claim Construction” slip op. at 6

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We have reviewed the cited testimony of Clearwater’s expert, including their calculations for arriving at a coat weight in Nakagawa that falls within the claimed range. See Ex. 1003 ¶¶ 132–33. We find that testimony, which is unrebutted, both credible and supported by the evidence of record. Thus, in light of Clearwater’s contentions, the cited portions of Nakagawa, and the unrebutted testimony of Clearwater’s expert, we are persuaded that Nakagawa discloses or otherwise suggests each and every element of claim 1. See Pet. 45–54, 60–64. Clearwater also persuades us that Cleveland discloses the additional subject matter of dependent claims 2, 3, and 11. See Pet. 64–66. Thus, we determine that Clearwater demonstrates that claims 1–3 and 11 are unpatentable as obvious over Nakagawa. F. Ground 3—Obviousness Over Nakagawa and Tanner” slip op. at 17

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner

    “qualifies as prior art under 35 U.S.C. § 102(e)(1) “based on both its provisional and non-provisional filing dates.” Inst. Dec. 4 n.5. We were persuaded by Clearwater’s proof that Cleveland’s provisional (Ex. 1006) is “virtually identical” to Cleveland itself (Ex. 1005) and that the provisional provides written description support for at least claim 1 of Cleveland. See Pet. 18–21 (citing Ex. 1006, 2–6, 9). We were also persuaded by Clearwater’s showing that the provisional provides written support for the subject matter relied upon in Cleveland. Id. at 21–40 (citing Ex. 1006, 1–9). We are still persuaded by Clearwater’s showing. Thus, we see no reason to disturb our earlier finding that Cleveland is prior art to the ’126 patent.” slip op. at 7

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “protectant layers has “a coat weight of from 5 to 30 lbs/3000 ft2.” As noted by Clearwater, Cleveland discloses a total coat weight for layers 14 and 16 as falling within the claimed range. Pet. 32–34 (citing Ex. 1005 ¶ 32). In particular, Cleveland discloses that “the coextruded layer of copolyester (irrespective of which side of the substrate the layer is disposed) is of a total coat weight of between about 10 and about 40 lb/3000 ft2 in any combination of between about 80/20 to 20/80 parts by weight of Ecoflex to Biomax,” of which “a total coat weight of 25 lb/3000 ft2 is preferred.” Ex. 1005 ¶ 32. As disclosed, Cleveland’s total coat weight range of 10–40 lb/3000 ft2 falls almost entirely within the claimed range, and the preferred total coat weight of 25 lb/3000 ft2 falls squarely within the claimed range. Thus, Cleveland satisfies claim elements [1.3.2] and [1.5.2]. See Titanium Metals Corp. v. Banner, 778 F.2d 775, 782 (Fed. Cir. 1985) (“[W]hen, as by a recitation of ranges or otherwise, a claim covers several compositions, the claim is anticipated if one of them is in the prior art.”) (citation omitted). As such, we find that Clearwater adequately demonstrates that Cleveland discloses all the elements of claim 1. 4. Dependent Claims” slip op. at 12

  Patent outcomesUS 8,637,126 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips
  Patents in suitUS 8,637,126
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Sep 2, 2026 · PGR2025-00021 · APJ Kimberly Mcgraw · PGR · Final written decision

  Claims 1, 3–7, and 12–20 are unpatentable: the Board found the asserted Kim, Kim–Yang, Lee, and Lee–Haller obviousness grounds proved, but not Lee–Park.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(e.g., an advanced degree may substitute for professional experience).” Pet. 21 (citing Ex. 1003 ¶¶ 36–37). Petitioner further contends that a “POSITA would also have been aware of and generally knowledgeable about 3D memory’s structure, its component parts, and how it operates.” Id. Patent Owner does not dispute Petitioner’s definition of a POSITA. PO Resp. 9. Based on our review of the complete record, we adopt Petitioner’s uncontested definition of a POSITA.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “The plain language of claim element [1.A] recites “wherein the first material layer is disposed over a first portion of the second material layer;” and claim element [1.B] recites “a landing pad disposed over a second portion of the second material layer.” Thus, the plain language of the claim merely recites that the first material layer is disposed over a first potion of the second material layer and the landing pad is disposed over a second portion of the second material layer. The plain language does not define what constitutes the first or second portions of the second material layer or define the first or second portions of the material layer by what is disposed above the layers. We agree with Petitioner that the term “portion” has a straightforward plain and ordinary meaning: a “part” of a larger whole. Pet. 5 (citing Ex. 1077, 406 (defining “portion” as “a part of a whole”)). The ’838 patent itself repeatedly uses the term “portion” this way. Ex. 1001, 5:40–43 (discussing both “an upper portion” and “lower portion” of a “staircase”), 5:66–6:1 (referencing “a portion of a top surface of a layer”); see also 4:39– 40, 7:15–17, 8:20–33, 8:34–65, 11:60–64, 12:38–59. Thus, we understand that the first and second portions of the second material layer are portions of (i.e., a part of the whole) second material layer. Neither the claims nor the Specification define what can constitute a first portion or a second portion of a second material layer.” slip op. at 11

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Dr. Giapis, argues Petitioner’s proposed modification of Lee requires a POSITA to (1) start with an oxide-based insulating layer 22 as shown in Figure 5B of Lee, (2) introduce an oxidant gas into the adjacent openings, and (3) oxidize a surface that is already oxide-based to form a curved surface. PO Resp. 78–81. Patent Owner provides credible evidence supporting its argument that a POSITA would not have been motivated to make these changes to Lee, as they are technically infeasible. Id. at 79 (citing Ex. 2019 ¶¶ 191–208). Dr. Giapis credibly explains that in Park’s process, an oxygen gas would be used to oxidize the silicon nitride or polysilicon, but “introducing such an oxidant into the openings of Lee’s structure above will not promote further oxidation to the existing oxide the relevant region . . . so nothing remains to be oxidized.” Ex. 2019 ¶¶ 192–193. We credit Dr. Giapis testimony that “[i]t is not possible to further oxidize a solid oxide material with oxygen gas as in Park. That is why Park’s thermal oxidation process is performed on silicon nitride or polysilicon, which are not oxides to begin with but they can be oxidized to form silicon dioxide.” Id. ¶ 193 (citing Ex. 2028 (Plummer) at 345–350). According to Dr. Giapis, a POSITA would have understood this and not expected the combination of Lee and Park to achieve any change in shape or any rounding in Lee’s Figure 5B. Ex. 2019 ¶ 193.” slip op. at 60

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “Patent Owner, however, with persuasive supporting testimony from Dr. Giapis, argues Petitioner’s proposed modification of Lee requires a POSITA to (1) start with an oxide-based insulating layer 22 as shown in Figure 5B of Lee, (2) introduce an oxidant gas into the adjacent openings, and (3) oxidize a surface that is already oxide-based to form a curved surface. PO Resp. 78–81. Patent Owner provides credible evidence supporting its argument that a POSITA would not have been motivated to make these changes to Lee, as they are technically infeasible. Id. at 79 (citing Ex. 2019 ¶¶ 191–208). Dr. Giapis credibly explains that in Park’s process, an oxygen gas would be used to oxidize the silicon nitride or polysilicon, but “introducing such an oxidant into the openings of Lee’s structure above will not promote further oxidation to the existing oxide the relevant region . . . so nothing remains to be oxidized.” Ex. 2019 ¶¶ 192–193. We credit Dr. Giapis testimony that “[i]t is not possible to further oxidize a solid oxide material with oxygen gas as in Park. That is why Park’s thermal oxidation process is performed on silicon nitride or polysilicon, which are not oxides to begin with but they can be oxidized to form silicon dioxide.” Id. ¶ 193 (citing Ex. 2028 (Plummer) at 345–350). According to Dr. Giapis, a POSITA would have understood this and not expected the combination of Lee and Park to achieve any change in shape or any rounding in Lee’s Figure 5B. Ex. 2019 ¶ 193.” slip op. at 60

  Patent outcomesUS 12,010,838 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 12,010,838
• Micron Technology, Inc. v. Yangtze Memory Technologies Co., Ltd.No claims unpatentable
  PTAB · Jul 21, 2026 · IPR2025-00190 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1, 3–11, 13, and 14 were not shown unpatentable because Dong did not disclose the claimed vertical wordline arrangement, and the proposed 3D NAND combination lacked support for motivation and reasonable expectation of success.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “understanding that the claim term “from bottom to top” refers to the vertical arrangement of word lines in the memory portions from bottom to top and not from source end to drain end, as asserted by Petitioner. Inst. Dec. 17. In other words, the claim terms describing the first and second portions having word lines “from top to bottom” refer to the relative vertical location of the word lines within the memory portions and not to location of the word lines relative to the source or drain. Our construction is based on the plain and ordinary meaning of the express language of the independent claims, which states that the second memory portion is formed either above or below the first memory portion. The forming of one memory portion above or below another portion establishes a top and bottom in relation to those portions. For example, claim 5 is directed to a “program method of memory” that requires a second portion formed above the first portion. A second memory portion that is formed above a first memory portion is on top relative to the first portion. Similarly, claims 1 and 1 and 11, which recite a memory having a second portion formed below a first portion, establish that the second portion is on the bottom relative to the first portion. Thus, the claim language itself establishes the vertical locations of the memory portions relative to each other (e.g., a second memory portion that is above the first portion is on top, relative to the first portion). It follows that claim terms referring to the top and bottom of word lines within the memory portions also refer to relative vertical locations of the word lines within the memory portions. Thus, we understand the plain and ordinary meaning of claim” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “In our Decision, we treated the preambles of claims 5 and 11 as limiting, noting that these preambles provide antecedent basis for the word line limitations recited in the body of their respective claim. Dec. 14–15, 8. Neither party disputes that the preambles of claims 5 and 11 are limiting. See PO Resp. 34–35 (agreeing that the preambles are limiting); see generally Reply 1–6 (not disputing that the preambles are limiting). We maintain our construction of the preambles in this Decision.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “we consider the level of ordinary skill at the time of filing. 35 U.S.C. § 103; see also Graham, 383 U.S. at 17 (discussing pre-AIA obviousness). Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had a had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) NAND memory devices (including issues relating to the operation, e.g., programming, of said devices), or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience). Pet. 22 (citing Ex. 1004 ¶¶ 40–42). Petitioner also asserts that a POSITA would have been aware of and generally knowledgeable about NAND memory’s structure and fabrication, its component parts, how it operates, and how it is controlled. Id. at 22–23 (citing Ex. 1004 ¶ 41). In the Institution Decision, we adopted the assessment offered by Petitioner, which Patent Owner did not contest. Inst. Dec. 13. Following institution, Patent Owner stated it does not dispute Petitioner’s definition of a POSITA. PO Resp. 9 (citing Khatri Dec. ¶¶ 42–47). Because Petitioner’s definition of the level of skill in the art appears consistent with the ’941 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Expert testimonyPatent owner expert creditedOther

    “We disagree and find that Dong’s Figure 5a does not depict wordlines in a physical vertical orientation, but rather depicts voltage diagrams. We agree with Patent Owner’s argument, supported by persuasive testimony by Dr. Khatri, that a POSITA would have understood that Dong’s voltage charts (e.g., Fig. 5a) simply represent which voltages are applied to which word lines and do not depict the physical orientation of the wordlines. See, e.g., Ex. 2028 ¶ 171 (citing Ex. 1005 ¶ 20; Ex. 1009 ¶¶ 52–54). As Dr. Khatri explains, Dong Figures 5a–5h depict different examples of self-boosting modes showing voltages applied differently to the wordlines and are not intended to depict the physical orientation of these word lines. Ex. 2028 ¶ 171; see also Sur-reply 11–12 (citing Ex. 1005 ¶¶ 47, 65, 63–67; Ex. 2028 ¶¶ 177–186). We agree with Dr. Kahtri’s persuasive testimony that a POSITA would understand that Figures 5a–5h are illustrated vertically, but do not represent the actual physical arrangement of the word lines in memory, which are shown to be horizontal in Dong’s Figure 4. See, e.g., Ex. 2028 ¶ 172 (citing Ex. 1005 ¶¶ 20, 45, 47, 87).” slip op. at 24

  Patent outcomesUS 11,568,941 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,568,941
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jul 20, 2026 · IPR2025-00228 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–18 are unpatentable: claims 1, 2, 4, 5, and 9–18 as obvious over Kim; claims 1–18 over Kim and Fang; claims 1–15 over Han and Fang; and claims 17–18 over Han, Fang, and Chen.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 26 (citing Ex. 1003 ¶42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does not dispute this assessment. PO Resp. 7–8. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’276 patent and the prior art of record.” slip op. at 6

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Dr. Campbell has a Ph.D. in physics, supplying the advanced degree that Petitioner’s definition of a person having ordinary skill in the art accepts as a replacement for some experience. Ex. 2006 ¶ 2. Dr. Campbell has significant experience in semiconductor technology, including in process technologies for submicron CMOS, years of research in semiconductor processing, materials, and device structures, and authored “[t]he leading textbook on semiconductor technology.” Id. ¶¶ 2–4. Dr. Campbell qualifies as a person of ordinary skill in the art under the parties’ agreed definition.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner proposed that the terms “exposing portions” and “etching the exposed portions” require two different steps performed in that order. PO Resp. 7–10. Petitioner does not contest this characterization. Pet. Reply 1– 2. Patent Owner also proposes that this requires the exposure step not to perform any etching of the newly exposed layer. PO Resp. 10–12 (citing Ex. 1001, 10:2–5, 10:15–17 (stating that the etch-stop layer “protects the underlying structure until all the VIA openings 640 are formed” and that it “[t]he essence of an etch-stop layer dictates that contact-hole etching stops or slows down upon contact, i.e., exposing without penetrating it.” Pet. Reply 11. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “described in earlier embodiments would not be consistent with Kim’s statement that previously described elements are “omitted” in the Figures 17A to 22B section “for concise description.” As admitted by Patent Owner, it would be a “reasonable inference” that materials described in a first embodiment for a particular hypothetical layer L would also be used for that layer L in later embodiments absent an express statement to the contrary “because you have just omitted that sort of duplicative description.” Tr. 37:9–38:12. Kim’s Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4–15 embodiments. Thus, it would similarly be a “reasonable inference” that aspects of the stack structure would be understood to apply to the same stack in the embodiments of Figures 17A–22B, which rely upon, in unaltered form, the earlier-described elements of the stack. stack on bottom, they “replace” and “exclude” any prior description of a gate-stack-on-top. PO Resp. 18–19 (citing Ex. 2019 ¶¶ 40–41; Ex. 1005 ¶¶ 185–187 (describing the etch-stop layer as covering the sacrificial layers only at their end portions)). However, as admitted by Patent Owner, all of Kim’s Figures show only a gate-stack-on-bottom structure. Tr. 41:6–7 (“For the first embodiment, it is true that figures show the gate stack on bottom.”). The fact that Kim’s Figures 17A–22B, which add etch-stop and barrier layers to the gate stack, are shown only as gate stack on bottom is merely consistent with the uniform use of gate-stack-on-bottom in Kim’s Figures, which show the layer-by-layer construction of its device. Like Figures 4–15, Figures 17A–22B exemplify rather than limit the description of the previously described memory stack, and do not exclude the gate-stack-onbottom description of the memory stack. Kim can be used for all it realistically teaches, including descriptions in its disclosure that are not represented by specific Figures. See In re Chapman, 357 F.2d 418, 424 (C.C.P.A. 1966) (stating that a reference “is not limited to the disclosures in its specific illustrative examples.”). Accordingly, the record supports Petitioner’s assertion that Kim’s teaching of a gate-stack-on-top alternative for the memory stack would be understood by a POSITA as a memory stack option applicable to its other embodiments having that same memory stack.” slip op. at 11

  Patent outcomesUS 11,101,276 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,101,276
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision

  Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  Patent outcomesUS 11,581,322 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,581,322
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Luxottica Of America, Inc. v. E-Vision Smart Optics, Inc.Adverse judgment
  PTAB · Jun 29, 2026 · IPR2025-01512 · APJ Arthur M Peslak · IPR · Adverse judgment

  The Board granted Patent Owner’s request for adverse judgment, cancelled claims 1–27, and terminated the proceeding.

  RulingsAdverse judgment

  • Adverse judgmentAdverse judgmentGranted

    “A party may request entry of adverse judgment against itself at any time during an inter partes review proceeding. See 37 C.F.R. § 42.73(b). Under these circumstances, entry of judgment adverse to the Patent Owner is appropriate as to claims 1–27 of the ’612 patent. Consequently, we grant Patent Owner's request for adverse judgment.” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
  None
  Patents in suitUS 11,971,612
• Jumio Corporation v. Facetec, Inc.No claims unpatentable
  PTAB · Jun 17, 2026 · IPR2025-00109 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–24 were not shown unpatentable because the petitioner failed to establish motivation to combine the references and failed to show the claimed different-distance image capture.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 11–12. In particular, based on the teachings of the ’910 Patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’910 Patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction We interpret claim terms using “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations — “substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques — are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 13–17; Pet. Reply 16–17. Those motivations might have been suitable had Tanii described techniques to verify three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 13–17, 25–28. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “distance from the user. Derakhshani teaches two different approaches (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 13 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Ex. 1005, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Ex. 1005, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject. Zhang also does not expressly disclose capturing a second image at a second distance. Petitioner acknowledges as much stating “[a]lthough Zhang does not expressly say that the second image is captured at a second distance different from the distance of the first image, this would have been obvious to a POSITA.” Pet. 61 (citing Ex. 1003 ¶ 1046). Because Zhang does not expressly disclose capturing a second image at a second distance, Petitioner once again relies on expert testimony to argue that the multiple images disclosed in Zhang would have been taken at different perspectives resulting from rotating or translating the position of the camera and that taking images at different distances would have enhanced Zhang’s homography-transformation procedure. Pet. 61–62 (citing Ex. 1003 ¶ 1046). From here Petitioner repeats many of the same arguments it made regarding the parallax approach from Derakhshani, except that these arguments are on even weaker footing because Zhang does not mention taking images by translating the position of the camera, nor even that the multiple images taken should be from different perspectives. Each of these assertions are made solely on the basis of Petitioner’s expert testimony, and as such are not persuasive. Pet. 61–62 (citing Ex. 1003 ¶¶ 1046). Petitioner’s argument that Zhang teaches capturing a second image at a second distance simply lacks sufficient support from Zhang’s disclosure.” slip op. at 25

  Patent outcomesUS 11,874,910 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,874,910
• Jumio Corp. v. Facetec, Inc.No claims unpatentable
  PTAB · Jun 17, 2026 · IPR2025-00108 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 1–24 were not shown unpatentable because the asserted combinations lacked adequate motivation to combine and did not teach capturing images at different distances.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 27–28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 13–14. In particular, based on the teachings of the ’938 patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’938 patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction We interpret claim terms using “the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). Under the principles set forth by the Federal Circuit, the “words of a claim ‘are generally given their ordinary and customary meaning,’” as would be understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “images are three dimensional—let alone a technique that captures two images at different distances, compares the images for certain differences, and verifies three dimensionality based on those differences, as recited by the claim. Instead, Tanii describes a system that “corrects warp in which the perspective is exaggerated when an image is captured with the user’s face at close range.” Ex. 1007, code (57). In particular, Tanii recognizes the physical phenomenon of perspective distortion (fish-eye distortion) where “[i]f the image of the face of a person or the like is captured from a point that is relatively nearby, an image is obtained in which the perspective appears exaggerated,” i.e., the user image is warped or distorted. Id. ¶ 6; see id. ¶ 48, Fig. 4B. Tanii corrects such warped images by enlarging peripheral areas of the user image. Id. ¶¶ 55–56.” slip op. at 17

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “distance from the user. Derakhshani teaches two different approaches: (1) focus-distance approach and (2) parallax approach. Petitioner acknowledges that the focus-distance approach does not expressly disclose capturing a second image at a second distance. Pet. 12 (distinguishing “focus distances” from “actual distances.”). This is because focus-distance, by definition, is not actual distance. Ex. 1005, 16:47–48 (“Focus distance is the distance from a sensor to a point in its field of view that is perfectly in focus.”) In Derakhshani’s focus-distance approach the camera stays the same distance from its subject—only the focus distance changes. Id. at 16:66–17:2 (“By comparing degree of focus for a landmark in images with different focus distances, the distance from the sensor to the landmark may be estimated.”) Derakhshani’s parallax approach also does not expressly disclose capturing a second image at a second distance. In the parallax approach the camera is rotated or slid about the user to create images with different perspectives. Derakhshani, 17:59–64 (“In some implementations, the sensor is moved about the subject during image capture to collect image data from different orientations relative to the subject. For example, a single camera may be rotated or slid slightly or multiple cameras at different positions may be used for image capture.”). Rotating a camera around a user does not change the distance of the camera from the user. At the hearing Petitioner, instead, focused specifically on the use of the word “slid” in Derakhshani as indicating that Derakhshani takes a second image at a second distance. Tr. 16:9–12 (“[Petitioner’s Counsel: . . . Dr. Daft is talking about some of the terms that Derakhshani is using. For example, the term slid and shown in the images, he talks about how slid refers to the different distances between the sensor and the user.”). We determine that it is more likely that the word “slid,” as used in the relevant portion of Derakhshani, further describes the rotation of the camera about the user. Derakhshani indicates as much by describing that both rotating and sliding the camera are examples of how the camera sensor is “moved about the subject during image capture.” Derakhshani, 17:60–61. Thus, sliding the camera does not necessarily disclose moving the camera to a second distance from the subject.” slip op. at 27

  Patent outcomesUS 11,693,938 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 11,693,938
• Jumio Corporation v. Facetec, Inc.No claims unpatentable
  PTAB · Jun 17, 2026 · IPR2025-00107 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–20 were not determined unpatentable because the petition did not establish motivation to combine the references or that they taught capturing images at different distances.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Patent Owner argues Petitioner’s proffered level of skill is too broad with respect to work experience. PO Resp. 27–28. Patent Owner counters that a person having ordinary skill in the art would have had a Bachelor’s degree in electrical engineering, computer engineering, computer science, physics, or a related field, and two years’ work experience related to biometric security, facial authentication, and three-dimensional computer vision such that they would have had significant academic and/or work experience in both facial biometrics and computer vision. Id. at 28–29. Having considered the full record at trial, we maintain the preliminary finding regarding the level of ordinary skill in the art. See Inst. Dec. 8. In particular, based on the teachings of the ’606 Patent and the asserted prior art, we are persuaded that an ordinarily skilled artisan would have had a work experience related to biometrics, facial authentication, computer vision, and/or optics as at least one of those fields is respectively implicated by the ’606 Patent and the asserted prior at. Moreover, our decision would be the same under either proposed level of skill.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties do not dispute any claim terms or phrases and our decision does not require construing any particular claim terms or phrases, therefore, we do not expressly construe any particular claim term or phrase. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We find that these reasons would not have adequately motivated a person having ordinary skill in the art to combine and modify the references in Petitioner’s asserted manner to reach the claimed features. Petitioner’s motivations—“substitution,” “obvious alternative . . . approaches,” “use of a known technique,” and “complimentary” techniques—are all similarly based on swapping or adding techniques for verifying three dimensionality. See Pet. 12–16; Pet. Reply 6–7. These motivations might have been suitable had Tanii described techniques for verifying three dimensionality, but Petitioner has not shown that Tanii describes any technique to verify three dimensionality. See Pet. 12–16, 19–23. Instead, as discussed above, Tanii describes the existence of the perspective distortion phenomenon and a technique for correcting it. As such, substituting the knowledge that perspective distortion exists and techniques to correct it does not correspond with approaches for verifying three-dimensionality, and so does not adequately motivate Petitioner’s combination. Put another way, because Tanii does not teach an approach for verifying three-dimensionality, Tanii’s techniques cannot be used as a substitute for approaches that do verify three dimensionality simply because Tanii discloses the concept of perspective distortion.” slip op. at 16

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusObjective indicia outweighedDecided for patent owner

    “Patent Owner has demonstrated a nexus by showing that certain objective indicia, discussed below, are the direct result of the unique characteristics of the claimed invention. As discussed above in our summary of the ’606 Patent and reflected in our discussion of Petitioner’s obviousness challenges (see §§ I.F, II.E.1, II.E.2, II.E.3), the unique characteristics of the claim relate to verification of three dimensionality by comparing two images taken at different distances for perspective distortion. Indeed, those features are what distinguish over the prior art. See id. Furthermore, Patent Owner, supported by testimony from its Chief Technology Officer, Mr. Rose, asserts the unique characteristics claimed are reflected in the “3D liveness checks” its ZoOm software product provides because ZoOm “confirms that a user is 3D by comparing images taken at different distances for expected differences in biometric data, such as the presence of appropriate perspective distortion and differences.” PO Resp. 25 (citing Ex. 2059 ¶ 49). Patent Owner’s assertion is further supported by a “FaceTec Software Explanation” stating that its software uses “near & far image data . . . to determine if the expected differences in perspective distortion are present in the image data” and, from that, “decides if there is sufficient evidence in the image data to conclude with a high degree [of] confidence that the image data contains first-generation biometric data captured in real-time from a live, physically present user.” Ex. 2067; see PO Resp. 25–26. As such, the 3D liveness checks provided by Patent Owner’s software are indicative of the unique characteristics of the claimed invention and, as we discuss below, certain objective indicia of nonobviousness have a direct nexus to the 3D liveness checks of its software.” slip op. at 30

  Patent outcomesUS 11,157,606 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,157,606

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.