• Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision

  Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12

  • BurdenNot shown unpatentable

    “referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22

  Patent outcomesUS 10,092,918 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 10,092,918
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

  Patent outcomesUS 11,844,921 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,921
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00706 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 1, 4, and 7–10 are unpatentable as obvious over Goubet and anticipated by Gao; proposed substitute claims 20 and 21 are denied as indefinite and lacking written-description support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 6. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionOther

    “Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). At first glance, the language of the limitation at issue—which, again, recites “the compressed air and the operative fluid mix together in said mixing chamber to form the fluid dispersion”—would seem to require the “fluid dispersion” (under the stipulated construction) to be fully formed in the “mixing chamber.” In other words, the language of the limitation alone would seem to support Patent Owner’s proposed construction for the “form the fluid dispersion” limitation. But the claim construction analysis does not end with consideration of the claim language alone. Next, we turn to the Specification. The Federal Circuit has said that the specification “is the single best guide to the meaning of a disputed term.” Phillips, 415 F.3d at 1315 (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). Here, the discussion in the Specification of precisely the same language as in the limitation at issue strongly supports that “to form a fluid dispersion” in the limitation at issue requires only initial mixing of the compressed air and operative fluid in the mixing chamber, with further “formation” of the ”fluid dispersion” occurring downstream of the mixing chamber: More importantly, the “predetermined amount” of compressed air and the “preselected amount” of the operable fluid are initially mixed together in the mixing chamber 226 to form a fluid dispersion. The diffusion chamber 112" is further structured to facilitate the formation of a plurality of substantially uniform droplets, as defined hereinabove, in the fluid dispersion prior to discharge from the diffusion chamber 112" through discharge port 132. Ex. 1001, 10:62–11:2 (emphasis added) (discussing Figure 6), quoted, in part, at Pet. Reply 6–710; see also Ex. 1001, 5:64–6:4 (same language, except without double primes, in a discussion of Figures 1 and 2). To be sure, certain passages in the Specification could be read to indicate that a “fluid dispersion” must be fully formed in the “mixing chamber.” See, e.g., Ex. 1001, 6:11–12 (“More in particular, the suppression chamber 232 receives the fluid dispersion from the mixing chamber 226.”); see also id. at 7:22–33, 11:39–52 (both implying that a “fluid dispersion” is formed in the mixing chamber). But the passage block quoted directly above (and the similar one bridging columns 5 and 6) more directly addresses the issue at hand—i.e., the scope of “form the fluid dispersion”—by using the same” slip op. at 13

  • Expert testimonyPatent owner expert discountedMixed

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1. Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “To satisfy its burden of proving obviousness, a petitioner cannot employ mere conclusory statements. The petitioner must instead articulate specific reasoning, based on evidence of record, to support the legal conclusion of obviousness.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016); TriVascular, Inc. v. Samuels, 812 F.3d 1056, 1066 (Fed. Cir. 2016) (“Although the KSR test is flexible, the Board ‘must still be careful not to allow hindsight reconstruction of references . . . without any explanation as to how or why the references would be combined to produce the claimed invention.’”) (citation omitted). Based on the complete record, we agree with Patent Owner that “Petitioner’s asserted motivation boils down to the conclusory statement that given Goubet and Kaiser, ‘it was well known in the field at the time of the invention that droplets of greater uniformity result in uniform droplet evaporation.’” PO Resp. 31 (quoting Pet. 59). We agree with Patent Owner that Petitioner’s discussion of the alleged reasons to combine (Pet. 59) is insufficient to support the proposed combination here. See Magnum Oil, 829 F.3d at 1380. Specifically, we are not persuaded that Kaiser’s teachings—which relate to combustion (Ex. 1014 at 43)—would have led one of ordinary skill in the art to the proposed modifications, which would allegedly “improve the smoothness (i.e., less harsh) of the aroma generated as the oil droplets evaporate in the surrounding airspace.” See Pet. 59 (emphasis added); White Pet. Decl. ¶ 251 (same); see PO Resp. 32 (“Rather, Dr. White merely describes the ability to achieve the effect as in the claimed patent, not why a [person of ordinary skill in the art] would look to the field of electrospray injection and combustion in mesoscale power-generation systems, using high-voltage electric fields to generate charged fuel droplets for controlled combustion in catalytic micro-combustors when considering atomization for scents.”). For these reasons, we determine, in light of the complete record, that Petitioner has not shown by a preponderance of the evidence that one of ordinary skill in the art at the time of the invention would have had reason to combine Goubet and Kaiser, as proposed. slip op. at 32

  Patent outcomesUS 10,583,449 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 10,583,449
• Aroma360, LLC v. Air Esscentials, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00705 · APJ Eric C Jeschke · IPR · Final written decision

  Claims 7–9 and 11 are unpatentable as obvious over Goubet; proposed substitute claim 21 is denied as indefinite.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Response, Patent Owner states that it “does not dispute” the definition of one of ordinary skill in the art proposed by Petitioner, but Patent Owner “reserves the right to address [the definition] should new issues materialize.” PO Resp. 5. Patent Owner did not address this issue in the Sur-reply. As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “The record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration, as asserted in Petitioner’s overall argument. See Pet. Reply 1–2. Contrary to Petitioner’s argument, in the cited general discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 2 (arguing that “Dr. Micklow’s declaration is premised on understandings of claim scope that are inconsistent with the constructions advanced by both of the parties” (emphasis added)). Instead, we read the cited portions of Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also Pet. Reply 1 (citing Ex. 1046, 112:4–12, 113:13–20, 115:15–18). Next, we turn to each of the four specific claim terms that Petitioner highlights in its further arguments.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “B. Claim Construction In inter partes reviews, the Board interprets claim language using the same claim construction standard that would be used in a civil action under 35 U.S.C. § 282(b), as described in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). See 37 C.F.R. § 42.100(b). Under that standard, we generally give claim terms their ordinary and customary meaning, as would be understood by a person of ordinary skill in the art at the time of the invention, in light of the language of the claims, the specification, and the prosecution history. See Phillips, 415 F.3d at 1313–14. Although extrinsic evidence, when available, may also be useful when construing claim terms under this standard, extrinsic evidence should be considered in the context of the intrinsic evidence. See id. at 1317–19. Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 10–11; PO Resp. 5. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “Florida Litigation a Joint Claim Construction statement that included stipulated claim constructions and disputed claim constructions for terms in the challenged patent as well as the ’449 patent and the ’918 patent. See Ex. 1018, Exhibit A (Stipulated Claim Constructions), Exhibit B (Disputed Claim Constructions). The parties stipulated to the construction of the terms “fluid dispersion” and “baffle” as recited in the challenged claim. See id., Exhibit A.10 10 When staying the Florida Litigation, the District Court cancelled the scheduled claim construction hearing. See ECF No. 67 (April 8, 2025) (granting joint motion to stay); ECF No. 68 (April 8, 2025) (cancelling the The stipulated construction of “fluid dispersion” merely restates the express definition of “fluid dispersion” from the challenged patent (although the definition is not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 3:8–20. Similarly, the stipulated construction of “baffle” essentially parrots one sentence in the challenged patent (again, not cited or discussed in the parties’ filing). Compare Ex. 1018, Exhibit A, with Ex. 1001, 7:57–59. To the extent necessary, we determine that the complete record supports the parties’ stipulated constructions of “fluid dispersion” and “baffle,” and we apply those constructions below.” slip op. at 10

  Patent outcomesUS 9,527,094 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · Nautilus
  Patents in suitUS 9,527,094
• Netflix, Inc. v. Divx, LLCAll claims unpatentable
  PTAB · Sep 21, 2026 · IPR2020-00558 · APJ Kevin F Turner · IPR · Remand

  Claims 1–24 are unpatentable as obvious over Chen, Lindahl, and Hurst because the combination teaches the claim limitations and has motivation to combine and a reasonable expectation of success.

  RulingsRemand decision

  • RemandOther

    “On February 13, 2026, the Federal Circuit issued a decision in the appeal vacating the Second Final Decision as to all challenged claims and remanding for further proceedings. Netflix II, 7. The Federal Circuit reversed the Board’s claim construction, vacated the Board’s decision, and remanded for further proceedings consistent with the claim construction the 6 The First Final Decision also addressed Petitioner’s Motion to Exclude (Paper 42), where we granted-in-part, denied-in-part, and dismissed-in-part that Motion. See 1st Final Dec. 28–37. Our determinations on that Motion were a part of Petitioner’s appeal to the Federal Circuit. See Paper 52. As the Federal Circuit did not address this aspect of the First Final Written Decision, we determine our conclusions with respect to that Motion remain undisturbed. Federal Circuit adopted. Id. The Federal Circuit issued its mandate on March 23, 2026.” slip op. at 4

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “person of ordinary skill in the art at the time of the invention (“POSITA”) would have had “a bachelor’s degree in mechanical engineering, electrical engineering, computer science, or a similar field with at least two years of experience in video streaming and media security or . . . a master’s degree in mechanical engineering, electrical engineering, computer science, or a similar field with a specialization in video streaming and media security.” Pet. 14–15 (citing Ex. 1003 ¶¶ 65–67). Patent Owner does not refute Petitioner’s assessment and appears to apply such a level of skill in its arguments against combining Chen, Lindahl, and Hurst to teach or suggest the elements of the challenged claims. See generally PO Resp. As such, we continue to adopt and apply Petitioner’s unopposed position as to the level of ordinary skill in the art for purposes of this decision. See Inst. Dec. 6; 1st Final Dec. 6; 2nd Final Dec. 10.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “In response, we conclude that the most natural reading of limitation [l] results from examination of the entire limitation: “locating encryption information that identifies encrypted portions of frames of video within the requested portions of the selected stream of protected video.” Ex. 1001, 27:54–57. The “within” most naturally connotes where the encrypted portions of frames of video occur, as opposed to determining where the encryption information may be located. Patent Owner’s interpretation is not wrong, i.e., the limitation could be read as Patent Owner suggests, leading to a narrower construction, but we are not persuaded that the construction of limitation [l] must be so limited, on the basis of the words themselves. We continue to reject Patent Owner’s interpretation that limitation [l] requires locating encryption information within the requested portions of the selected stream of protected video. See Inst. Dec. 27–30; 1st Final Dec. 8. Although it is apparent that encryption information can be found within the requested portions, we are not persuaded that the claim language or ’588 Patent implicitly or explicitly requires such a relationship. Likewise, although embodiments disclosed in the Specification of the ’588 Patent are consistent with Patent Owner’s more restrictive construction, the Specification also is consistent with the more grammatically correct construction as well. Thus, we construe limitation [l] as requiring that the encrypted portions of frames of video be within the requested portions of the selected stream of protected video, but we do not construe limitation [l] as requiring that the encryption information be within the requested portions of the selected stream of protected video.” slip op. at 15

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “We are persuaded that the Petition demonstrates that one of ordinary skill in the art would have had a motivation to combine Chen, Lindahl, and Hurst, as asserted by Petitioner. As the Federal Circuit found, the Petition pointed to and relied upon the portions in Chen describing pre-Chen art, without scalability or FEC features that were part of what Chen describes as aspects of its own inventive system. Netflix I, slip op. at 9–10 (citing Pet. 17–19, 69–70). We agree with Petitioner that “Chen-924 teaches several embodiments that adaptively stream alternative representations of a video using partially encrypted container files.” Pet. 20 (citing Ex. 1010, 14:41–15:60). We determine that Chen-924 provides support for the rationale provided in the Petition, and that one of ordinary skill in the art would have been motivated to combine Chen and Lindahl in view of the disclosure of Chen-924. As discussed above, the Petition does not rely solely on privacy concerns and improvements to efficiency as its motivation to combine the references. See Pet. 18–19 (specifying piracy concerns, improvements to the efficiency of adaptive streaming, optimization of the balance between bitrate and bandwidth, and improvements to the end-user experience with fast startup and seek). With respect to whether one of ordinary skill in the art would have” slip op. at 30

  Patent outcomesUS 10,225,588 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,225,588
• Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentable
  PTAB · Sep 3, 2026 · IPR2025-00673 · APJ Michael R Zecher · IPR · Final written decision

  Claims 1–7 are unpatentable as obvious over the combined teachings of the asserted references, including Shin and Aoyama and Shimomura and Iwase.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsOther

    “1 SoundClear also filed a Contingent Motion to Amend that proposed to replace originally challenged claim 5 of the ’675 patent with proposed substitute claim 8. Paper 21. We, however, granted SoundClear’s request to withdraw its Contingent Motion to Amend and, as a result, the Contingent Motion to Amend will no longer be considered in this proceeding. Paper 30.” slip op. at 2

  • Skill levelOther

    “2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMotivation not foundMixed

    “combination because (1) configuring Shin’s processor 120 accordingly “would have been trivial, involving straightforward changes to enhance the processor’s approach to simplifying and abbreviating its output”; and (2) this approach was well-known as evidenced by Ha’s disclosure of replacing “team meeting” and “date” with “schedules” based on the user’s environment.6 Id. at 27–28 (first quoting Ex. 1011 ¶ 97, then quoting Ex. 1011 ¶ 98) (citing Ex. 1002 ¶ 102; Ex. 1011, Fig. 7).” slip op. at 33

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “4. Dr. Stern’s Testimony is Reliable In its Patent Owner Response, SoundClear contends that “Dr. Stern’s” slip op. at 125

  Patent outcomesUS 11,244,675 unpatentable
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,244,675
• Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-00565 · APJ Michael R Zecher · IPR · Final written decision

  Claims 1–5 are unpatentable because Amazon showed they are anticipated by Shin; the Board did not reach Amazon’s contingent obviousness ground over Shin.

  RulingsFinal written decision

  • BurdenOther

    “Written Decision under 35 U.S.C. § 318(a) as to the patentability of claims 1–5 of the ’337 patent. For the reasons we identify below, we hold that Amazon has demonstrated by a preponderance of the evidence that these claims are unpatentable.” slip op. at 2

  • Skill levelOther

    “2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

  Patent outcomesUS 11,069,337 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,069,337
• Cambridge Industries USA, Inc. / Accelight Technologies, Inc. v. Applied Optoelectronics, Inc.No claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-01570 · APJ Monica S Ullagaddi · IPR · Final written decision

  The majority held claims 1–19 not shown unpatentable: Wang did not anticipate claims 1–10, and Wang with Xiong did not render claims 11–19 obvious.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent is self-explanatory and would have been recognized by a [person of ordinary skill in the art] as having plain and ordinary meanings.” Pet. 10. “Petitioner submits that no special constructions are required” because “the claim terms appear understandable in the context of the disclosure provided by the specification of the ’690 Patent.” Id. (citing Ex. 1003 ¶ 58). Patent Owner “agrees that the claim terms should be given their plain and ordinary meaning as understood by a [person of ordinary skill in the art].” PO Resp. 10. After reviewing the arguments and evidence before us, we determine that we do not need to expressly construe any claim term to resolve any controversy in the proceeding. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • BurdenNot shown unpatentable

    “Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner sufficiently establishes that claim 1 is unpatentable under 35 U.S.C. § 102 as anticipated by Wang by a preponderance of the evidence.” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12

  Patent outcomesUS 10,788,690 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,788,690
• Cambridge Industries USA, Inc. / Accelight Technologies, Inc. v. Applied Optoelectronics, Inc.No claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-00437 · APJ Monica S Ullagaddi · IPR · Final written decision

  The majority held claims 1–19 not unpatentable: Wang did not establish anticipation of claims 1–10, and Wang with Xiong did not establish obviousness of claims 11–19.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard.” slip op. at 12

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Wang discloses that “the isolator 100 is bonded to the substrate by means of an adhesive” in which “[t]he adhesive is not only used to fix the isolator 100 to the substrate, but also fills a gap between the isolator 100 and the substrate to improve the installation accuracy of the isolator 100.” Ex. 1006 ¶ 41 (emphasis added). Petitioner does not explain how filling in a gap between the isolator 100 and a substrate necessarily results in “each of the plurality of optical isolators [being] disposed substantially in parallel relative to each other,” as recited in claim 1. The cited portion in paragraph 43 references Figures 5 and 6, which depict Embodiment 1 of Wang and are reproduced below. Figures 5 and 6 of Wang depict isolators 100, base 311, and baffles 312. Although paragraph 44 of Wang states that “[t]he substrate includes a base 311, and baffles 312 and isolators 100 sequentially disposed on the base 311,” Petitioner does not sufficiently persuade us how Wang’s disclosure “sequentially disposed” isolators necessarily discloses that the isolators are “disposed substantially in parallel relative to each other” as recited in independent claim 1. Ex. 1006 ¶ 44. Although the cited portion in Figure 6 of Wang apparently shows a possibly parallel arrangement of Petitioner cites to Dr. Kirk’s Declaration, but Dr. Kirk does not opine on why cited portions of Wang necessarily disclose or depict the claimed “disposed substantially in parallel relative to each other” requirement. Ex. 1003 ¶¶ 73, 74; Ex. 1006 ¶¶ 41, 43, Figs. 6, 8, 10. At best, Dr. Kirk testifies that “a POSITA would have understood that Wang anticipates Claim 1.” Ex. 1003 ¶ 75. Also relevant to our analysis is that this is an anticipation ground and Petitioner is required to show that the reference discloses not only the elements of the claimed invention, but also discloses those elements as arranged in the claim. Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1371 (Fed. Cir. 2008). Although our Institution Decision concluded that Petitioner had demonstrated a reasonable likelihood of prevailing with respect to its anticipation challenge to independent claim 1 applying Wang (Inst. Dec. 6), at this stage of the proceeding we are required to evaluate Petitioner’s challenges under a higher standard, the preponderance of evidence standard. For the foregoing reasons, we are not persuaded that Petitioner” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “challenge set forth in the Petition by citing the background of the ’690 patent and Dr. Willner’s deposition testimony and characterizing the same as “admissions” of Patent Owner in Petitioner’s Reply, such “evidence” did not form the basis of Appellant’s original position set forth in the Petition.6 Petitioner’s arguments that all of the components recited in claim 11 “were known in the prior art” or that Dr. Willner admitted the same are unpersuasive at least because the Petition did not set forth this position. Contrary to Petitioner’s arguments during the oral hearing, the Petition does not present challenges based on “Applicant Admitted Prior Art.” See generally Pet.” slip op. at 23

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “field of the ’690 Patent would have had at least (1) an undergraduate degree in electrical engineering, computer engineering, computer science, or a comparable field of study and (2) at least two years of experience with optical data communications or a comparable field of work.” Pet. 14 (citing Ex. 1003 ¶ 22). Petitioner also states that “[i]ndividuals having different educational backgrounds and supplemental experience might still be of ordinary skill in the art if such experience compensates for any deficiencies in education relative to the criteria stated above” and “[i]n some cases, additional education might be an acceptable substitute for some experience, or vice versa.” Id. Patent Owner does not dispute Petitioner’s characterization of the level of skill in the art. See e.g., PO Resp. 9. We adopt Petitioner’s unopposed definition of the level of ordinary skill in the art as it appears consistent with the disclosures of the ’690 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  Patent outcomesUS 10,788,690 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,788,690
• Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Final written decision

  Claims 1–5, 7, and 9 are unpatentable under §103 over Moskowitz and Steffee; the Board did not reach the Moskowitz-only ground and rejected the Hess ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical or metals and materials engineering), and at least five years of experience consisting of (a) designing, developing, evaluating and/or using spine devices, (b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and (c) biomechanical and functional loading of orthopedic implants. Pet. 17 (citing Ex. 1002 ¶ 49). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 49). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 9. Based on the full record, we determine that Petitioner’s undisputed proposed level of skill is reasonable and consistent with the ’385 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1. “channel” Throughout the challenged claims, “channel” appears together with “curved” in the term “curved channel.” For example, claim 1 recites “the fusion member comprising a first curved channel and a second curved channel,” “a first anchoring member configured to insert through the first curved channel,” and “second anchoring member configured to insert through the second curved channel.” Ex. 1001, 26:58–59, 26:60–61, 26:65– 66. Prior to institution, Petitioner asserted that one of ordinary skill in the art would “understand the claim term ‘channel’ to refer to a passage through which something moves or is conveyed.” Pet. 18 (citing Ex. 1002 ¶ 54). And, for purposes of our Decision on Institution, we adopted Petitioner’s proposed construction as being “consistent with the intrinsic record.” Institution Dec. 10. the ’385 [p]atent is readily understood by a POSA in context without needing explicit construction” and the plain and ordinary meaning should apply. PO Resp. 9–10. According to Patent Owner, the ’385 patent “consistently uses ‘channel’ to refer to a pathway within the fusion member through which an anchoring member traverses” and “explicitly states that channels may have different shapes and sizes and need not have a constant diameter, indicating the patentee did not intend to narrow the term beyond its common understanding.” Id. Petitioner replies noting that Patent Owner’s understanding “is substantively identical to Petitioner’s construction (‘a passage through which something moves or is conveyed’), specifically applied to an anchoring member.” Pet. Reply 6 (Pet. 18; PO Resp. 9–10). Thus, Petitioner concludes that “[t]he parties thus agree with the Board’s construction.” Id. Based on the full record, we agree with Petitioner that the parties’ positions on the meaning of the term “channel” are “substantively identical.” Because we see no difference between the parties’ position on the meaning of “channel,” we continue to adopt Petitioner’s proposed construction as it is consistent with the plain language of the claims and Specification. See Pet. 18 (citing Ex. 1001, 9:42–44, 9:53–55, 10:63–66, 11:47–63, 14:25–31, 14:65–67, 16:32–35, 22:51–57, 24:55–67) (The Specification uniformly refers to a “channel” as “a passage through which something (e.g., an anchoring member) traverses.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “between the spinous processes in order to decompress the spinal canal, and thus, “relieve pressure on the spinal cord and nerves by increasing the area of the spinal canal.” Ex. 1006, 1:32–34, 1:50–52, 2:1–6. In contrast, the ’385 patent identifies that “the goal is to achieve solid bony fusion between the involved endplates and eliminate the symptoms caused by motion and associated degenerative and other reactive changes between these unstable vertebral segments.” Ex. 1001, 1:53–57. Thus, Hess’s disclosed implant is designed to distract and stabilize the spinous processes, not to promote solid bony fusion between adjacent vertebral bodies. Consequently, we agree with Patent Owner that “converting Hess for intervertebral fusion would require eliminating its core dynamic stabilization functionality—directly contradicting Hess’s stated design objectives.” PO Resp. 42 (citing Ex. 1006, 2:5–26, 7:43–45). We also are not persuaded that Petitioner adequately explains why a person of ordinary skill would have modified Hess’s implant in the manner proposed. Petitioner contends that only “minimal modifications” to Hess’s shell dimension and shape would be required for intervertebral use. Pet. 61–67; Ex. 1002 ¶¶ 122–128. However, simply modifying the shape and size of Hess’s shell does not, without more, support a motivation to redesign Hess’s device from a posterior interspinous implant engaging spinous processes to an interbody implant positioned between vertebral bodies and anchored into vertebral bodies. Here, Hess discloses that modifying its dimensions serves to “preserv[e] mobility and alignment.” Ex. 1006, 7:5–7. Conversely, the ’385 patent’s fusion implant serves to limit mobility between vertebrae by achieving “solid bony fusion between the fusion member and the adjacent vertebral bodies.” Ex. 1001, 24:67–25:3. spinal fusion procedures” (id. at 6:49–52), we do not find that statement, without more, to disclose or suggest reconfiguring Hess’s interspinous implant as an “a fusion member configured to position between first and second vertebral bodies,” as required by limitation [1.1]. At most, Hess’s “adjunct to” statement suggests that the interspinous implant may be used in connection with, or in support of, a fusion procedure. It does not explain how or why Hess’s implant would be redesigned for placement between two adjacent vertebral bodies, nor does it teach that Hess’s locking wings would be reoriented or adapted to anchor into vertebral bodies rather than spinous processes. On this point, Mr. Culbert states that “[t]he only changes required to modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success.” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success. Hess’s disclosure that its shell may have shape variations to match adjacent bone (Ex. 1006, 7:7–13) also does not adequately explain why a person of ordinary skill would have had a reason to redesign Hess’s device for a different intervertebral environment, or why such a redesign would and “anchoring members,” i.e., locking wings. And, to the extent Hess discloses matching the shell to “the profile of the adjacent bone when deployed” (Ex. 1006, 7:11–13), Hess never suggests adapting the shell for placement between two adjacent vertebral bodies or for use as a fusion cage, it discloses that the “shell 12 is dimensioned and configured for placement between the spinous processes of symptomatic disc levels” (id. at 7:2–4). Thus, we agree with Patent Owner that the proposed modification “minimizes the structural differences and conflicting functional objectives inherent in modifying a device intended for the posterior elements of the spine for use in the anterior load-bearing column” (emphasis omitted). PO Resp. 41. For the reasons discussed above, we determine that Petitioner’s reliance on Mr. Culbert’s testimony amounts to more than just providing a motivation to modify Hess. Here, it amounts to relying on expert testimony to supply a missing limitation. As such, Petitioner’s arguments are not persuasive to demonstrate that the prior art teaches the limitations of the claim by a preponderance of the evidence. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 16 (PTAB Aug. 24, 2022) (precedential) (explaining that relying on expert testimony “is particularly problematic in cases where, like here, expert testimony is offered not simply to provide a motivation to combine prior-art teachings, but rather to supply a limitation missing from the prior art.”).” slip op. at 18

  Patent outcomesUS 8,460,385 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,460,385

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.