- Gettattle, Inc. v. Afterwords, Inc.All claims unpatentablePTAB · Oct 5, 2026 · IPR2025-00677 · APJ Ryan H Flax · IPR · Final written decision
Claims 1–7, 10, 13, 16, 18, and 19 are unpatentable as anticipated by Douglas and Ganesh; the revised contingent motion to amend is denied.
RulingsFinal written decision- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“record before us, we conclude that Petitioner proves by a preponderance of the evidence that each challenged claim of the ’811 patent is anticipated by Douglas and by Ganesh. Accordingly, we find that claims 1–7, 10, 13, 16, 18, and 19 of the ’811 patent are unpatentable. Moreover, we find that Patent Owner’s Revised Contingent Motion to Amend adds new matter in every proposed substitute claim, and, therefore, the motion is denied.” slip op. at 80
- 112 supportMotion to amend, deniedDenied
“Because the RMTA does not meet the foundational statutory and regulatory requirements, we decline to reach Petitioner’s arguments as to the asserted unpatentability of the proposed substitute claims. C. CONCLUSION ON REVISED MOTION TO AMEND Because the RMTA does not meet foundational statutory and regulatory requirements for a motion to amend, it is denied.” slip op. at 80
Patent outcomesUS 10,430,811 unpatentable§ 102 anticipationcites PhillipsPatents in suitUS 10,430,811 - Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Altria Client Services LLC v. Yiwu Jingangke Trading Co., Ltd.Adverse judgmentPTAB · Oct 1, 2026 · PGR2026-00035 · APJ Robert L Kinder · PGR · Adverse judgment
The Board entered adverse judgment against Patent Owner for abandoning the contest and canceled the sole challenged claim.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Pursuant to our rules, “[a]ctions construed to be a request for adverse judgment include . . . [a]bandonment of the contest.” 37 C.F.R. § 42.73(b)(4). Our prior order warned that a failure to respond would be construed as an abandonment of the contest under 37 C.F.R. § 42.73(b)(4), and that entry of judgment adverse to Patent Owner and cancellation of the challenged claim may follow. Show Cause Order, 2. Because Patent Owner did not respond by the September 15, 2026, deadline and has not entered an appearance in this proceeding, we determine that Patent Owner has abandoned the contest. Under these circumstances, we enter judgment adverse to the Patent Owner and cancel the challenged design claim.” slip op. at 2
None - Tesla, Inc. v. Intellectual Ventures II LLCNo claims unpatentablePTAB · Aug 20, 2026 · IPR2025-00343 · APJ Scott A Daniels · IPR · Final written decision
Claims 1–6 and 8–13 were not shown unpatentable because Petitioner did not establish a reason to combine Bucknell’s multiplexing techniques with Eckert.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“Patent Owner does not expressly dispute Petitioner’s definition of a person of ordinary skill in the art. See generally PO Resp. On this record, Petitioner’s proposed level of ordinary skill in the art is not disputed and is consistent with our review and understanding of the technology and descriptions in the ’138 patent and the asserted prior art references. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 12
- Prior constructionPrior construction adoptedDecided for petitioner
“1. a subset of radio bearers Petitioner points out that in IPR2022-01127 the Board “preliminarily determined that a subset of the plurality of radio bearers” means “less than all of the plurality of radio bearers.” Pet 12 (citing Ex. 1019, 18–19). Petitioner explains that, in the present proceeding, it has applied “the prior art in accordance with that construction; however, in view of the asserted grounds, no claim term requires express construction to find the Challenged Claims unpatentable.” Id. (citing Nidec 868 F.3d 1017). Patent Owner neither disputes the prior construction of “a subset of radio bearers,” nor offers additional constructions. See generally PO Resp. To the extent necessary, and in accordance with our prior determination, we construe “a subset of the plurality of radio bearers” to mean “less than all of the plurality of radio bearers.”” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed
“bears pointing out that the specification of the ’138 patent appears to explain what “a single allocation” means: If there are multiple QoS requirements within a single 3GPP PDP context, a single physical allocation of radio resources may be made to the UE. In this manner, a single PDP context implies a single CCTrCh. This single physical allocation of radio resources provided to a UE is shared amongst a number of services, in proportion to their respective QoS requirements, for example in proportion to the signalled weight values (Stier). Ex. 1001, 9:36–43 (emphasis added). Petitioner’s expert, Dr. Ding, explains that the “abbreviation CCTrCh was understood in the art to refer to a transport channel known as the Coded Composite Transport Channel.” Ex. 1003 ¶ 88. Dr. Ding testifies that Eckert teaches selecting data for uplink within a determined TTI and scheduling the uplink transmission on a transport channel, E-DCH, where scheduling of the E-DCH in a UE is controlled by a base station. Eckert, [0012] (“[A] new dedicated transport channel called Enhanced Dedicated Channel (E-DCH) has been introduced for this purpose. The fundamental characteristics of this new transport channel include . . . scheduling controlled by the base station, also called NodeB in UMTS…” Id. ¶ 90. In addition to Eckert disclosing a single transport channel E-DCH, Petitioner argues that Eckert discloses using a “finite quantum of physical resources” where “[t]he ’138 patent disclosure parallels Eckert, with both the E-DCH and CCTrCH transport channels relating to a UMTS uplink, employing spreading codes in code division multiple access (CDMA), and Reply 6 (citing Ex. 1005, ¶¶ 3, 8, 15, 23; Ex. 1071 ¶¶ 17–20; Ex. 1011 ¶¶ 6, 51). We do not need to specifically interpret this claim phrase because there is no actual dispute as to the meaning of the claim language itself and because, ultimately, the construction of this phrase plays no part in our Decision.” slip op. at 15
- BurdenNot shown unpatentable
“D. Ground 1: Claims 1–4 and 8–11 – Alleged Obviousness over Eckert in view of Bucknell and Lohr-1 On the complete record now before us, Petitioner has not established a preponderance of evidence that claims 1–4 and 8–11 would have been obvious over Eckert, Bucknell, and Lohr-1. For the reasons explained below we determine that Petitioner has failed to show why a person of ordinary skill in the art would have modified Eckert in view of Bucknell in the manner claimed. We focus our analysis below on claim 1, and more specifically on those limitations for which the combination of Eckert and Bucknell is asserted. 1. Limitations [1.0]–[1.2] and the combination of Eckert and Bucknell The combination of Eckert and Bucknell is essential to each of Petitioner’s asserted grounds in this proceeding. Pet. 13. At the outset, we address this issue because our determination that Petitioner has failed to show why a person of ordinary skill in the art would have combined Eckert and Bucknell is dispositive as to all grounds.” slip op. at 20
Patent outcomesUS 10,292,138 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,292,138 - Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00226 · APJ Matthew S Meyers · IPR · Final written decision
Claims 1–5, 7, and 9 are unpatentable under §103 over Moskowitz and Steffee; the Board did not reach the Moskowitz-only ground and rejected the Hess ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical or metals and materials engineering), and at least five years of experience consisting of (a) designing, developing, evaluating and/or using spine devices, (b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and (c) biomechanical and functional loading of orthopedic implants. Pet. 17 (citing Ex. 1002 ¶ 49). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 49). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 9. Based on the full record, we determine that Petitioner’s undisputed proposed level of skill is reasonable and consistent with the ’385 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“1. “channel” Throughout the challenged claims, “channel” appears together with “curved” in the term “curved channel.” For example, claim 1 recites “the fusion member comprising a first curved channel and a second curved channel,” “a first anchoring member configured to insert through the first curved channel,” and “second anchoring member configured to insert through the second curved channel.” Ex. 1001, 26:58–59, 26:60–61, 26:65– 66. Prior to institution, Petitioner asserted that one of ordinary skill in the art would “understand the claim term ‘channel’ to refer to a passage through which something moves or is conveyed.” Pet. 18 (citing Ex. 1002 ¶ 54). And, for purposes of our Decision on Institution, we adopted Petitioner’s proposed construction as being “consistent with the intrinsic record.” Institution Dec. 10. the ’385 [p]atent is readily understood by a POSA in context without needing explicit construction” and the plain and ordinary meaning should apply. PO Resp. 9–10. According to Patent Owner, the ’385 patent “consistently uses ‘channel’ to refer to a pathway within the fusion member through which an anchoring member traverses” and “explicitly states that channels may have different shapes and sizes and need not have a constant diameter, indicating the patentee did not intend to narrow the term beyond its common understanding.” Id. Petitioner replies noting that Patent Owner’s understanding “is substantively identical to Petitioner’s construction (‘a passage through which something moves or is conveyed’), specifically applied to an anchoring member.” Pet. Reply 6 (Pet. 18; PO Resp. 9–10). Thus, Petitioner concludes that “[t]he parties thus agree with the Board’s construction.” Id. Based on the full record, we agree with Petitioner that the parties’ positions on the meaning of the term “channel” are “substantively identical.” Because we see no difference between the parties’ position on the meaning of “channel,” we continue to adopt Petitioner’s proposed construction as it is consistent with the plain language of the claims and Specification. See Pet. 18 (citing Ex. 1001, 9:42–44, 9:53–55, 10:63–66, 11:47–63, 14:25–31, 14:65–67, 16:32–35, 22:51–57, 24:55–67) (The Specification uniformly refers to a “channel” as “a passage through which something (e.g., an anchoring member) traverses.”).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“between the spinous processes in order to decompress the spinal canal, and thus, “relieve pressure on the spinal cord and nerves by increasing the area of the spinal canal.” Ex. 1006, 1:32–34, 1:50–52, 2:1–6. In contrast, the ’385 patent identifies that “the goal is to achieve solid bony fusion between the involved endplates and eliminate the symptoms caused by motion and associated degenerative and other reactive changes between these unstable vertebral segments.” Ex. 1001, 1:53–57. Thus, Hess’s disclosed implant is designed to distract and stabilize the spinous processes, not to promote solid bony fusion between adjacent vertebral bodies. Consequently, we agree with Patent Owner that “converting Hess for intervertebral fusion would require eliminating its core dynamic stabilization functionality—directly contradicting Hess’s stated design objectives.” PO Resp. 42 (citing Ex. 1006, 2:5–26, 7:43–45). We also are not persuaded that Petitioner adequately explains why a person of ordinary skill would have modified Hess’s implant in the manner proposed. Petitioner contends that only “minimal modifications” to Hess’s shell dimension and shape would be required for intervertebral use. Pet. 61–67; Ex. 1002 ¶¶ 122–128. However, simply modifying the shape and size of Hess’s shell does not, without more, support a motivation to redesign Hess’s device from a posterior interspinous implant engaging spinous processes to an interbody implant positioned between vertebral bodies and anchored into vertebral bodies. Here, Hess discloses that modifying its dimensions serves to “preserv[e] mobility and alignment.” Ex. 1006, 7:5–7. Conversely, the ’385 patent’s fusion implant serves to limit mobility between vertebrae by achieving “solid bony fusion between the fusion member and the adjacent vertebral bodies.” Ex. 1001, 24:67–25:3. spinal fusion procedures” (id. at 6:49–52), we do not find that statement, without more, to disclose or suggest reconfiguring Hess’s interspinous implant as an “a fusion member configured to position between first and second vertebral bodies,” as required by limitation [1.1]. At most, Hess’s “adjunct to” statement suggests that the interspinous implant may be used in connection with, or in support of, a fusion procedure. It does not explain how or why Hess’s implant would be redesigned for placement between two adjacent vertebral bodies, nor does it teach that Hess’s locking wings would be reoriented or adapted to anchor into vertebral bodies rather than spinous processes. On this point, Mr. Culbert states that “[t]he only changes required to modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success.” slip op. at 17
- Expert testimonyPetitioner expert discountedDecided for patent owner
“modify Hess for use as an intervertebral implant would be to modify the dimensions of Hess’s shell, which was ‘dimensioned and configured for placement between the spinous processes’” (Ex. 1002 ¶ 126 (citing Ex. 1006, 7:3–4)), but Mr. Culbert does not explain how Hess’s locking wings and guide tracks would be reoriented or adapted to function as anchoring members that are inserted into adjacent vertebral bodies rather as opposed to spinous processes. Instead, Mr. Culbert simply states that “Hess’s locking wings would engage and at least partially penetrate the superior and inferior adjacent vertebrae” (emphasis added) (Ex. 1002 ¶ 135) without explaining how or why one of ordinary skill in the art would have made the modification with a reasonable expectation of success. Hess’s disclosure that its shell may have shape variations to match adjacent bone (Ex. 1006, 7:7–13) also does not adequately explain why a person of ordinary skill would have had a reason to redesign Hess’s device for a different intervertebral environment, or why such a redesign would and “anchoring members,” i.e., locking wings. And, to the extent Hess discloses matching the shell to “the profile of the adjacent bone when deployed” (Ex. 1006, 7:11–13), Hess never suggests adapting the shell for placement between two adjacent vertebral bodies or for use as a fusion cage, it discloses that the “shell 12 is dimensioned and configured for placement between the spinous processes of symptomatic disc levels” (id. at 7:2–4). Thus, we agree with Patent Owner that the proposed modification “minimizes the structural differences and conflicting functional objectives inherent in modifying a device intended for the posterior elements of the spine for use in the anterior load-bearing column” (emphasis omitted). PO Resp. 41. For the reasons discussed above, we determine that Petitioner’s reliance on Mr. Culbert’s testimony amounts to more than just providing a motivation to modify Hess. Here, it amounts to relying on expert testimony to supply a missing limitation. As such, Petitioner’s arguments are not persuasive to demonstrate that the prior art teaches the limitations of the claim by a preponderance of the evidence. See Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 16 (PTAB Aug. 24, 2022) (precedential) (explaining that relying on expert testimony “is particularly problematic in cases where, like here, expert testimony is offered not simply to provide a motivation to combine prior-art teachings, but rather to supply a limitation missing from the prior art.”).” slip op. at 18
Patent outcomesUS 8,460,385 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,460,385 - Globus Medical, Inc. v. Spinelogik, Inc.All claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00225 · APJ Matthew S Meyers · IPR · Final written decision
Claims 1–6, 11, 12, and 15–17 are unpatentable: claims 1–4, 6, 11, 12, 15, and 17 over Blain; claims 5 and 16 over Blain, Bray, and Steffee.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that one of ordinary skill in the art would have had a bachelor’s or equivalent degree in mechanical engineering or a related discipline (e.g., biomedical engineering, metals and materials engineering), and at least five years of experience with a) designing, developing, evaluating and/or using spine devices, b) anatomy, physiology and biology of soft and calcified tissues including bone healing and fusion, and c) biomechanical and functional loading of orthopedic implants. Pet. 18–19 (citing Ex. 1002 ¶¶ 77–78). Petitioner also asserts that “[m]ore education can supplement practical experience and vice versa.” Id. (citing Ex. 1002 ¶ 78). “Patent Owner does not dispute the proffered definition for a POSA.” PO Resp. 10. proposed level of skill is reasonable and consistent with the ’805 patent and the asserted prior art. Thus, for these reasons, we adopt Petitioner’s level of skill in the art.” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for petitioner
“Based on the full record, we determine that “housing,” as it appears in the context of the term “delivery housing” is a component that is a part of the delivery mechanism (see Ex. 1001, 11:27–31) and that simply contains and guides another component during delivery. See Ex. 1001, 13:25–27, 21:30–50. Thus, we apply the ordinary meaning of “housing,” as it appears in the context of the term “delivery housing,” and address in the context of “delivery housing,” as recited by claims 2 and 4.” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“understanding of plain and ordinary meaning as set forth in the litigation.” Pet. Reply 13 (citing Ex. 1022, 2 (“channel . . . [that] has a curved path”)). Thus, Petitioner concludes that the parties agree on construction of “curved channel.” Id. at 13–14.10 9 Although the parties refer to “curved” alone or to a “curved channel,” we understand the parties to be referring to a “channel of the fusion member [that] is curved,” as recited in claims 5 and 16. 10 At oral argument, the parties confirmed that there was no dispute as to the meaning of “curved channel.” See Tr. 15:12–14 (Petitioner stating that “the term “curved channel” appears consistent with the plain language of the claims and Specification. Thus, we adopt the parties’ agreed-upon construction and construe a channel that is “curved” to mean a channel following a curved trajectory.” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“We have considered Petitioner’s arguments and evidence, and Patent Owner’s counterarguments and find, on the complete trial record, that Petitioner demonstrates, by a preponderance of the evidence, that Blain discloses “a fusion member for positioning between two vertebral bodies, the fusion member having a first plurality of channels, each channel of the first plurality of channels having an opening on a same side of the fusion member,” as recited by limitation 1.1. At the outset, we find Patent Owner fails to establish that any of the alleged differences between Blain’s “apertures and the ’805 [p]atent’s internal channel geometry” relate to any particular recitation in argued limitation 1.1. Although we acknowledge that claims 5 and 16 each requires curved trajectories (see, e.g., claim 5 reciting “each channel of the fusion member is curved”), limitation 1.1 does not recite such a feature. As Petitioner correctly notes, “[n]othing in the claim requires a special ‘internal channel geometry,’ ‘shaped block,[’] ‘curved tubular channels,’ non ‘straight-through’ apertures, or ‘flexible’ anchors.” Pet. Reply 14 (footnote omitted). See In re Self, 671 F.2d 1344, 1348 (CCPA 1982) (rejecting arguments “not based on limitations appearing in the claims”). Therefore, after reviewing the arguments and evidence, we determine that Petitioner has shown by a preponderance of the evidence that Blain discloses the subject matter of limitation 1.1.” slip op. at 19
Patent outcomesUS 9,730,805 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,730,805 - Mediatek Inc. v. Parkervision, Inc.All claims unpatentablePTAB · May 22, 2026 · IPR2024-00796 · APJ Iftikhar Ahmed · IPR · Final written decision
Claims 1–20 are unpatentable as obvious over Nevo and Avitabile, Young and Estabrook, and Young, Estabrook-1988, and Estabrook-1989.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“Network LLC, 929 F.3d 1350, 1357 (Fed. Cir. 2019). On its face, the language “energy transfer signal” does not specify any restrictions on the type of system in which it is utilized, nor its characteristics. In the context of claims 1 and 11, the “energy transfer signal” is the basis on which the “switch” operates, so as to “sub-sample and transfer energy from a first electromagnetic (EM) signal.” Ex. 1001, 50:63–65, 51:56–58. Accordingly, based on the claim language, the term “energy transfer signal” need only be a signal for operating a switch to sub-sample and transfer energy from an electromagnetic signal. That is its plain and ordinary meaning.” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“’686 patent broadly includes knowledge and experience as to RF circuit design. See supra § III.B. Petitioner contends that “Nevo’s transceivers [102a/102b] are for Bluetooth and IEEE 802.11,” and that a person of ordinary skill in the art would have understood that both protocols “required down-conversion in their receivers to obtain a baseband signal.” Id. at 35 (citing Ex. 1004, 4:45–50; Ex. 1002 ¶ 118). Nevo’s disclosure would have motivated a person of ordinary skill in the art to look to Avitabile, which provides the circuit level detail for down-converters. See Ex. 1006, Abstract. Avitabile specifically provides circuitry for down-conversion in the s-band frequency range, which is in the range of Bluetooth and IEEE 802.11 (2.4 GHz). Id. at Abstract, Figs. 6, 7. Accordingly, we determine a person of ordinary skill in the art would have been motivated to look to down-converters in the range of frequency needed, and would have been motivated to combine Avitabile’s teachings with those of Nevo, with a reasonable expectation of success.” slip op. at 55
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
Patent outcomesUS 7,483,686 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,483,686 - Penumbra, Inc. v. Rapidpulse, Inc.No claims unpatentablePTAB · Feb 17, 2026 · IPR2024-01261 · APJ Jamie T Wisz · IPR · Final written decision
Claims 1–20 were not shown unpatentable because the asserted combinations did not teach the claimed predetermined cycle for controlling distal fluid flow.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“(1) a person with a B.S. in engineering or an equivalent field, with two-four years of academic or industry experience in aspiration embolectomy and thrombectomy or comparable industry experience who would, where appropriate, work or consult with others, including a physician, to develop embolectomy or thrombectomy devices; or (2) an interventional neurosurgeon with at least three years of experience developing and/or using medical devices in embolectomy or thrombectomy procedures, and who would, where appropriate, work or consult with others, including an engineer, to develop such a medical device. Pet. 11 (citing Ex. 1005 ¶ 48). Petitioner also contends that, “[a] person with less education but more relevant practical experience, or more relevant education but less practical experience, may also meet this standard.” Id. Patent Owner states that for purposes of its PO Response, it “accepts ¶ 44). We adopt Petitioner’s characterization because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’402 patent and the cited prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“specification explicitly includes sensors similar to those in the prior art in support of their argument that the claimed “predetermined cycle” must not exclude the use of such sensors. Pet. Reply 15 (citing Ex. 1001, 32:55–33:7, 40:66–41:5, 44:9–29). We reviewed the portions of the specification cited by Petitioner. We agree with Patent Owner that one excerpt discussing sensor use appears to be directed to triggering the predetermined cycle rather than causing timing changes during the cycle itself (Ex. 1001, 32:55–66) (describing use of a pressure sensor to “determine when the vacuum channel 3 is clogged by a thrombus and automatically perform the unclogging procedures described herein”), while another excerpt discusses a sensor that Petitioner that the ’402 patent discusses the use of sensors to “tune” the system and that such “tuning” can be done statically (setting the cycle timing in advance) or dynamically (adjusting the timing during the cycle itself). See Ex. 1001, 48:19–49:50. Overall, we find that these disclosures involving sensors demonstrate that sensors may be used in various ways in different embodiments. However, none of these disclosures explicitly discuss the use of sensors in conjunction with a “pre-determined cycle.” Therefore, we find that the ’402 patent specification’s discussion of “sensors” are not particularly informative as to the appropriate construction of a “predetermined cycle” and do not outweigh the other explicit disclosures of “predetermined cycle” in the patent. We next turn to the other intrinsic evidence discussed by the parties — the prosecution history. As discussed by Patent Owner, in the Notice of Allowance, the Examiner found that Garrison did not teach or suggest a “predetermined cycle” because Garrison’s controller “changed the cycle of opening and closing the valves based on feedback from sensors.” Ex. 1004, 86. We acknowledge that the patent applicant filed subsequent comments during prosecution in which they stated that they “do[] not concede that the Examiner’s characterizations of the terms of the claims and the prior art are correct.” Id. at 29. However, we agree with Patent Owner that the importance of the Examiner’s statement in the Notice of Allowance does not rely on it being an express disclaimer (a standard which it does not meet). PO Sur-reply 8. We also considered Petitioner’s contention that the Examiner’s interpretation of Garrison may have been in error (PO Resp. 16); however, even if this were true, the Examiner’s statement still provides helpful insight into how the Examiner was interpreting the term sensors to change the opening and closing of valves during a cycle was not a “predetermined cycle.” Id. at 86. In sum, we find that Patent Owner’s proposed construction is consistent with the usage of the term “predetermined cycle” in the ’402 patent specification and prosecution history. Thus, after considering all of the cited evidence, we construe “predetermined cycle” to mean that “the timing of the sequence of valve operations in the cycle is determined beforehand, i.e., fixed, rather than varying based on feedback after operation begins.”” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“2. Other Terms The parties also provided proposed constructions for the limitations of “[limited/limiting] to a positive amount of exit flow” and “control[ling] fluid flow in and out from the distal end of the catheter.” See Pet. 15–16; Pet. Reply 1–8; PO Resp. 22–24; PO Sur-Reply 2–6. However, having evaluated the arguments and evidence before us, we determine that construction of these terms is not necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable
“We agree with Patent Owner that neither Petitioner nor Mr. Brown propose any combination of Yang and Mullins that does not include Mullins’s pressure sensor in order “to control fluid flow in and out from the distal end of the catheter.” Indeed, in addressing the “predetermined cycle” limitation, Mr. Brown contends that Mullins discloses a “cycling controller that ‘varies aspiration pressure according to sensed pressure within the catheter lumen.’” Ex.1005 ¶¶ 131–32 (citing, e.g., Ex.1008, 27:40–28:20 (“[a] novel aspect of this pump system is the incorporation of feedback into the pump algorithm in order to produce more effective pressure cycling”)). This use of a sensor to change pressure during a cycle, is not a “predetermined cycle” under our construction. combinations is its discussion of distal end flow control, not for its sensors.” Pet. Reply 17 (citing Ex. 1035 ¶ 83). However, Petitioner’s obviousness grounds rely on the combination of Yang and Mullins, especially with regard to Mullins’s disclosure of “a controller” in order “to control fluid flow in and out.” As discussed above, Mullins relies on the sensor-feedback approach in order to control flow and we find that Petitioner has not presented persuasive evidence of how the combined disclosures of Yang and Mullins would control flow without using Mullins’s sensor feedback approach. See W.L. Gore & Assocs., Inc. v. Garlock, Inc., 721 F.2d 1540, 1550 (Fed. Cir. 1983) (error to “consider[] … references in less than their entireties, i.e., in disregarding disclosures in [them] … that diverge from and teach away from the invention”). Therefore, we determine that Petitioner has not sufficiently shown that the combination of Yang and Mullins discloses or renders obvious “a controller configured to open and close the vacuum valve and the vent valve in a predetermined cycle to change a level of vacuum at the distal end of the catheter and to control fluid flow in and out from the distal end of the catheter.” Accordingly, having considered the parties’ respective evidence and arguments, we find that Petitioner has not shown by a preponderance of the evidence that claim 1 of the ’402 patent would have been unpatentable as obvious over the combination of Yang and Mullins.” slip op. at 27
Patent outcomesUS 11,406,402 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,406,402 - Alpinestars S.P.A. / Alipinestars USA Inc. v. Dainese S.P.A.Rehearing deniedPTAB · Feb 9, 2026 · IPR2025-00750 · APJ Benjamin D M Wood · IPR · Rehearing
The Board denied rehearing, leaving institution denied because Petitioner did not show a reasonable likelihood of prevailing on claims 1–22 under the challenged obviousness grounds.
RulingsRehearing decision- RehearingRehearing, deniedDenied
“Petitioner misstates the Decision’s reasoning. As is clear from the previous discussion, we determined that Petitioner’s articulated reasons for combining EP’536 with CN’180 lacked a rational underpinning, not because “EP’536 does not relate to ‘air bags,’” but because the means by which EP’536’s device inflates differs fundamentally from that of CN’180’s device. Dec. 17–18. Petitioner did not acknowledge this critical difference in the Petition, and continues not to do so in its Rehearing Request.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“EP’536 with CN’180 lacked a rational underpinning because EP’536’s inflation mechanism differs fundamentally from CN’180’s inflation mechanism. Dec. 17–18. As we stated, whereas CN’180’s fall-protection belt uses an airbag that requires an external source of pressurized air to inflate, EP’536’s garment does not need an external inflation device because “the gas generating agent 18 in each envelope automatically generates gas and inflates the envelopes in response to rising temperatures.” Id. at 18 (citing Ex. 1004 ¶ 15; Ex. 1005 ¶¶ 5, 19). This difference reflects the fundamentally different purposes of the two devices: CN’180’s device is designed to provide “fall protection” to, e.g., “elderly people,” (Ex. 1005 ¶ 1, 3), whereas EP’536’s device provides “adaptive thermal insulation” for, e.g., garments worn by fire fighters. Ex. 1004 ¶¶ 1–3, 250. Because of the different means by which EP’536’s and CN’180’s devices inflate and the different purposes for doing so, we were not persuaded that one of ordinary skill in the art would have combined the references as Petitioner proposed. Dec. 18. We further noted that the modification would not have improved the reusability of EP’536’s device “by having only one mechanism to recharge,” because EP’536’s “gas generating agent does not need any ‘mechanism to recharge.’” Dec. 18. Instead, we noted EP’536’s teaching that its gas generating agent “automatically recombines or condenses in response to a temperature decrease to return the envelopes, and therefore the garment, to its original thickness, at which point the gas generating agent is ready for subsequent reactivation.” Id. (citing Ex. 1004 ¶¶ 139–141). Finally, we determined that replacing EP’536’s envelopes with CN’180’s airbag “would have made EP’536’s invention unsuitable for its intended purpose: providing a protective garment with ‘adaptive thermal insulation.’” Dec. 19. We stated that “Petitioner does not suggest, and we have found nothing in the record to establish, that CN’180’s airbag would provide this feature.” Id. at 20.” slip op. at 3
- Obviousness (§103) › KSR rationalesMotivation not foundNot shown unpatentable
“rationales for combining EP’536 and CN’180. Reh’g Req. 6–7. First, Petitioner asserts that we “improperly rejected Petitioner’s ‘simple substitution’ evidence in view of [the Board’s] incorrect conclusion that EP’536 does not disclose an ‘external source of inflation [EP’536’s dosing aids].’” Id. at 6 (citing Dec. 18–19). This argument is unpersuasive at least because, as we discussed above, EP’536’s dosing aids do not constitute an external source of inflation. Petitioner further argues that we incorrectly evaluated its “obvious to try” rationale because, contrary to our analysis, Petitioner did in fact identify a problem to be solved by its “finite number of solutions”: “simplify[ing] the design and reduc[ing] the number of required inflation mechanisms.” Id. at 6–7. The Petition’s entire “obvious to try” discussion is as follows: [A] POSITA would have found it obvious to try a one-piece airbag 10 with strip-shaped inflation units 12 in the EP’536- CN’180 airbag system because it would have been a selection from a finite number of identified predictable solutions (i.e., using one chamber with connected individual inflation units 12 versus multiple individual envelopes 20). 5 Petitioner also argues that dosing aids are “needed in order to make the disclosed device reusable.” Reh’g Req. 5–6. This is incorrect, as EP’536 conveys that the reusability of the device is a result of the gas generating agent condensing or recombining when temperatures fall. Ex. 1004 ¶¶ 139– 141. Even if it were true, however, it is unclear how it would support Petitioner’s argument. Pet. 16. As is evident, Petitioner did not identify a design need, market pressure, or other problem that would have been addressed by its identified “solutions,” and therefore we were not persuaded by this rationale. Dec. 19. Petitioner’s attempt to cure this deficiency in its Rehearing Request is tardy. We cannot misapprehend or overlook an assertion that Petitioner fails to make in the Petition. It is also insufficient. Petitioner does not provide any evidence of a known design need or market pressure to “simplify [EP’536’s] design” or reduce the number of “required inflation mechanism” it uses.” slip op. at 7
§ 103 obviousnessPatents in suitUS 12,012,065 - Tiktok Inc. v. Ntech Properties, Inc.Some claims unpatentablePTAB · Feb 6, 2026 · IPR2024-01340 · APJ Terrence W Mcmillin · IPR · Final written decision
Claims 1–12 and 14–18 are unpatentable as obvious over Whitehead, alone or with Marcus ’904; claims 13 and 19–24 were not shown unpatentable.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“establishes that the subject matter of independent claim 19 would have been obvious in view of Whitehead. Claim 19 recites “an aggregator having a memory and a processor, the processor adapted for . . . providing an output signal including data indicative of the selection and of user data.” Ex. 1001, 15:51–16:3. As discussed above (Section II.C.2), we construe claim 19 as requiring a signal including both “data indicative of the selection and of user data.” Accordingly, we consider whether Petitioner has shown that Whitehead teaches or suggests that the “aggregator” “provid[e] an output signal including” both “data indicative of the selection and of user data.”” slip op. at 46
- Expert testimonyOther
“Cristofalo’s “user identifiers” represent data about users that Cristofalo’s system uses to “select a specific media object” (advertisements) from received “multi-object programming data.” Cristofalo at ¶ [0048]. For example, a user identifier may indicate that a given user is a Coca-Cola drinker, and when the receiving system receives the multi-object programming data it can select a particular media object out of several possible media objects (e.g., a Pepsi advertisement) to push to the user. Id. This user data exists independently of, and does not relate to, any particular media stream or streams. See Goodrich PO Resp. Decl. at ¶ 135. Petitioner seems to recognize this when tersely referring to “user identifiers” as “data,” not “data relating to a plurality of streams.” Pet. at 71. Accordingly, Cristofalo’s “user identifiers” are not the claimed “data related to the plurality of media streams.” Goodrich PO Resp. Decl. at ¶ 136.” slip op. at 73
Patent outcomesUS 8,145,704 mixed§ 103 obviousnesscites GrahamPatents in suitUS 8,145,704
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.