- Integrated Dna Technologies, Inc. v. Tecan Genomics, Inc.Adverse judgmentPTAB · Aug 11, 2025 · IPR2024-01502 · APJ James A Worth · IPR · Adverse judgment
The Board granted the joint motion for adverse judgment after Patent Owner disclaimed claims 1–3, 5–11, and 14–17, and terminated the inter partes review.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Section 42.73 provides that “[a] party may request judgment against itself at any time during a proceeding. Actions construed to be a request for adverse judgment include: (2) Cancellation or disclaimer of a claim such that the party has no remaining claim in the trial.” 37 C.F.R. § 42.73(b)(2). We agree that adverse judgment and termination are appropriate in view of the disclaimer because no challenged claim remains.” slip op. at 2
NonePatents in suitUS 9,546,399 - Trove Brands, LLC v. Camelbak Products, LLCInstitution deniedPTAB · Jul 8, 2025 · IPR2025-00155 · APJ James A Worth · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1, 3–9, 11–17, or 19 were unpatentable on the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under [35 U.S.C. §] 311 and any response filed under [35 U.S.C. §] 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018).1 For the reasons set forth below, we determine that Petitioner has not demonstrated that there is a reasonable likelihood that at least one of claims 1, 3–9, 11–17, and 19 of the ’187 patent is unpatentable based on the grounds set forth in the Petition, and we do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products. Pet. 19 (citing Ex. 1003 ¶ 29). Petitioner asserts that more work experience may substitute for a lower level of education, and vice versa. Id. Patent Owner admittedly sets forth “a similar, though slightly different, level of ordinary skill”: a bachelor’s degree in mechanical engineering or the equivalent coursework and approximately one year of experience with liquid-containing devices, with more work experience substituting for less education and vice versa. Prelim. Resp. 27 (citing Ex.2001 ¶¶ 60–64). Patent Owner discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision on whether to institute this proceeding. Id. For purposes of this decision, we adopt Petitioner’s proposed level of skill as being consistent with the prior art, although our conclusion on whether to institute would be unchanged under either definition.” slip op. at 10
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“The failure to use the word “means” in a claim element creates a rebuttable presumption that § 112 ¶ 6 does not apply. Williamson v. Citrix Online, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (en banc). The presumption can be overcome and § 112 ¶ 6 will apply if the challenger demonstrates that the claim term fails to “recite[ ] sufficiently definite structure” or else recites “function without reciting sufficient structure for performing that function. “Construing a means-plus-function claim term is a two-step process.” Id. at 1351. “The [tribunal] must first identify the claimed function.” Id. “Then, the [tribunal] must determine what structure, if any, disclosed in the specification corresponds to the claimed function.” Id. There may be multiple claimed functions, each with disclosed corresponding structure. See id. at 1351–52.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We are persuaded by Patent Owner that the term “automatically” in “to automatically disengage the first and second catch structures” means that it is not just the force applied by the user that disengages the first and second catch structures, but also the bias of the mouthpiece that helps to disengage the first and second catch structures. In the first instance, we agree with Patent Owner that the claim itself recites that, upon actuation, the mouthpiece assembly is “release[d]” to “move via its bias from the stowed configuration to the dispensing configuration.” See Ex. 1001, 21:59–64. This meaning is supported by the Specification which states: “In some examples, the mouthpiece assembly is biased toward the dispensing configuration and thus moves automatically under its bias upon release by the user-release mechanism.” Ex. 1001, 1:64–67. We further agree with Patent Owner that the plain and ordinary meaning of “automatic” is that the user operation alone is not responsible for the action. For example, in one dictionary cited by Petitioner, “automatic” is defined as “2: having a self-acting or self-regulating mechanism.” See Ex. 2007, 1.11 The district court construction is consistent therewith. The district court identified two functions, the first of which is the same as that of the ’028 patent, i.e., “Automatically disengaging the first and second catch structures upon actuation of the user release mechanism and thereby releasing the mouthpiece assembly to move via its bias from the stowed configuration to the dispensing configuration.” See Section II.C.1, supra. In discussing that function, the district court states: “While a user may impart force upon user engagement portion 260 to release the mouthpiece, the bias of the mouthpiece towards the dispensing configuration causes the mouthpiece to move automatically, satisfying the requirements of Claim 1.” Ex. 2002, 16. We conclude that the term “automatically” in “adapted to” slip op. at 17
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,684,187 - PTAB · Jun 6, 2025 · IPR2025-00140 · APJ James A Worth · IPR · Institution
The Board instituted IPR of claims 1–18 on all petitioned challenges, finding a reasonable likelihood that at least claim 1 is obvious over Nakajima and the knowledge of a person of ordinary skill.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under [35 U.S.C. §] 311 and any response filed under [35 U.S.C. §] 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). For the reasons set forth below, we determine that Petitioner has demonstrated that there is a reasonable likelihood that at least one of claims 1–18 of the ’250 patent is unpatentable, and we institute an inter partes review of claims 1–18 based on the grounds set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner asserts that a person of ordinary skill in the art (“POSITA”) would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products. Pet. 15 (citing Ex. 1002 ¶ 25). Petitioner asserts that more work experience may substitute for a lower level of education, and vice versa. Id. Patent Owner admittedly sets forth “a similar, though slightly different, level of ordinary skill”: a bachelor’s degree in mechanical experience with liquid-containing devices, with more work experience substituting for less education and vice versa. Prelim. Resp. 28 (citing Ex. 2001 ¶ 50). Patent Owner discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision on whether to institute this proceeding. Id. For purposes of this decision, we adopt Petitioner’s proposed level of skill as being consistent with the prior art, although our conclusion on whether to institute would be unchanged under either definition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“For purposes of this decision on institution, we adopt the proffered dictionary definition of “mouthpiece” as “a part (as of an instrument) that goes in the mouth or to which the mouth is applied” (see Ex. 2005), and we construe this as an intended use of this component of the apparatus, because this definition is consistent with the plain and ordinary meaning of the term which is a compound of “mouth” and “piece” and also because this definition is consistent with the Specification. For example, the Specification describes the use of the mouthpiece as follows: “In use, the mouthpiece is adapted to be configured to the dispensing configuration by a user placing the mouthpiece in the user’s mouth and biting upon or otherwise compressing the appropriate portions of sidewalls 92 of the mouthpiece.” Ex. 1001, 8:45–49. We note that, although the Specification refers to bite-actuation of the mouthpiece, for example in the field of the disclosure and certain embodiments (e.g., Ex. 1001, 1:25–27), the independent claims do not require bite-actuation. The Specification identifies the mouthpiece as item 72 (which is depicted, for example, in Figure 25, reproduced supra). Ex. 1001, 3:7‒8. 7 Exhibit 2005 appears to be from an online Merriam-Webster dictionary accessed March 13, 2025. Ex. 2005, 4. At this time, there is no argument in the preliminary record that this definition would have been different before the critical date of the patent.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Although the construction of this limitation may be helpful in deciding the issues of unpatentability, we determine that the construction of this term would benefit from further briefing during the trial phase of this proceeding, and we invite the parties to continue to brief this issue. Therefore, we do not provide a preliminary construction of the term at this time.” slip op. at 14
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,851,250 - Trove Brands, LLC v. Camelbak Products, LLCInstitution deniedPTAB · May 7, 2025 · IPR2024-01501 · APJ Linda E Horner · IPR · Institution
The Board denied institution because Trove did not show a reasonable likelihood of proving claims 1, 2, 5, 6, 8, 9, 15, 16, or 21 obvious over the asserted prior art.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Under 35 U.S.C. § 314(a), an inter partes review may not be instituted unless the information presented in the petition and the preliminary response shows “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and the Preliminary Response, and for the reasons explained below, we determine that Petitioner has not shown a reasonable likelihood that it would prevail with respect to at least one of the challenged claims. Thus, we deny the Petition and do not institute an inter partes review of claims 1, 2, 5, 6, 8, 9, 15, 16, and 21 of the ’028 patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner argues that a POSITA would have “a bachelor’s degree in mechanical engineering or the equivalent coursework and approximately one year of experience with liquid-containing devices, with more work experience substituting for less education and vice versa.” Prelim. Resp. 23 (citing Ex. 2001 ¶¶ 56–65). Patent Owner also states that it “discerns no material difference between the definitions provided by the parties for purposes the Board’s decision on whether to institute this proceeding.” Id. We agree that there appears to be no material difference in the parties’ definitions of the level of ordinary skill in the art. For the purposes of this Decision, we apply Petitioner’s definition of the level of ordinary skill in the art. We determine that this definition is consistent with the prior art of record and the skill reflected in the Specification of the ’028 patent, based on our review of the limited record. Moreover, the prior art itself may be sufficient to demonstrate the level of skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not” slip op. at 11
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“as a means-plus-function limitation under 35 U.S.C. § 112, sixth paragraph, because “mechanism” is a nonce word for performing the claimed function without reciting structure for performing that function, and a POSITA would not have understood the term to have “a sufficiently definite meaning as the name for a structure that performs the claimed function.” Pet. 16–17 (citing Ex. 1003 ¶ 39). For claim 1, Petitioner identifies two distinct structures described in the ’028 patent that correspond to the claimed “user release mechanism” for performing the claimed functions. Id. at 34. Specifically, Petitioner asserts that the ’028 patent describes a first embodiment in which the corresponding structure includes sliding member 238, and its component parts. Id. at 34– 35 (citing Ex. 1001, 12:50–13:25, 13:29–33). In the second embodiment, the corresponding structure includes user engagement portion 260 on rigid collar 170. Id. at 35–36 (citing Ex. 1001, 13:40–54). Petitioner does not separately address the structure corresponding to the “user release mechanism” as recited in claim 21. Id. at 53‒54 (relying on the same arguments presented for unpatentability of claim 1). court issued a claim construction order in the parallel litigation construing the term “user release mechanism” as a means-plus-function limitation under § 112, sixth paragraph. Prelim. Resp. 23 (citing Ex. 2002, 12–15). The district court ruled that the corresponding structure for claim 1 includes “[s]liding member 238, including its component parts,” or “[u]ser engagement portion 260.” Ex. 2002, 15. For claim 21, the district court ruled that the corresponding structure includes “[s]liding member 238, including its component parts” or “[u]ser engagement pad 240, planar portion 242, tabs 244, collar engagement portion 254, depression 256.” Id. at 17. Patent Owner indicates that, “[f]or purposes of this proceeding only,” it does not dispute that the claimed user release mechanisms are means-plusfunction limitations, and it does not dispute the corresponding structure identified by Petitioner, even though the district court did not specifically identify engagement portion 260 as corresponding structure for claim 21. Prelim. Resp. 25 (citing Ex. 2002, 15–19). Although Patent Owner does not dispute Petitioner’s proposed interpretation of the “user release mechanism,” because claim interpretation is a matter of law and the dispositive issue in this Decision turns on the interpretation of this claim limitation, we address it in this Decision. We agree with the parties that the “user release mechanism” elements recited in claims 1 and 21 are means-plus-function limitations governed by § 112, sixth paragraph. See 35 U.S.C. § 112 ¶ 6 (“An element in a claim for a combination may be expressed as a means or step for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof.”). “means,” it uses the nonce word “mechanism” without reciting structure for performing the functions recited in the claims. See Williamson v. CitrixOnline, LLC, 792 F.3d 1339, 1350 (Fed. Cir. 2015) (“Generic terms such as ‘mechanism,’ ‘element,’ ‘device,’ and other nonce words that reflect nothing more than verbal constructs may be used in a claim in a manner that is tantamount to using the word “means” because they ‘typically do not connote sufficiently definite structure’ and therefore may invoke § 112, para. 6.”).” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“[U]nder § 112, ¶ 6 equivalence, functional identity is required” and “[s]tructural equivalence under § 112, ¶ 6 is met only if the differences are insubstantial, that is, if the assertedly equivalent structure performs the claimed function in substantially the same way to achieve substantially the same result as the corresponding structure described in the specification.” (citing Chiuminatta Concrete Concepts, Inc. v. Cardinal Indus., Inc., 145 F.3d 1303, 1308 (Fed. Cir. 1998)). Here, Petitioner states that Kiyota’s lock release buttons 40 “perform the claimed function in the same way to achieve the same result” as the ’028 patent’s sliding member 238, and its component parts (Pet. 37) without providing sufficient supporting explanation or evidence. Petitioner explains only that the two structures operate in “substantially the same way” by a user pressing an element that that slides towards the mouthpiece assembly to disengage the catch structures. Id. at 37–38 (citing Ex. 1003 ¶ 89). The Petition does not discuss any of the differences between Kiyota’s structure and the ’028 patent’s structure or provide an explanation of why these differences are insubstantial. Indeed, as Patent Owner persuasively explains, there are notable differences in the “way” the two structures perform the claimed function and the “result” they achieve. See Prelim. Resp. 39–40 (discussing the ’028 patent’s one-finger operation and indirect catch disengagement, versus Kiyota’s two-finger operation and direct catch disengagement). Moreover, the analysis in Dr. Vallee’s declaration substantially parallels the discussion in the Petition and does not provide any additional explanation or evidence to show that the differences between the “way” the two structures operate or the “result” they achieve are insubstantial. Compare Ex. 1003 ¶¶ 85–91, with Pet. 34–38. For these reasons, Petitioner fails to show sufficiently that Kiyota discloses an equivalent structure to the structure described in the ’028 patent corresponding to the “user release mechanism” recited in claim 1. Accordingly, Petitioner has not met its burden to show a reasonable likelihood that claim 1 is unpatentable as obvious over Kiyota. slip op. at 23
Claim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,782,028 - Catalyst Orthoscience Inc. v. Shoulder Innovations, Inc.Institution deniedPTAB · Apr 24, 2025 · PGR2025-00001 · APJ James A Tartal · PGR · Institution
The Board denied institution of post-grant review of claims 1–22, exercising its discretion under § 324(a) based on the Fintiv factors.
RulingsInstitution decision- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivInstitution denied
“1. whether the court granted a stay or evidence exists that one may be granted if a proceeding is instituted; 2. proximity of the court’s trial date to the Board’s projected statutory deadline for a final written decision; 3. investment in the parallel proceeding by the court and the parties; 4. overlap between issues raised in the petition and in the parallel proceeding; 5. whether the petitioner and the defendant in the parallel proceeding are the same party; and 6. other circumstances that impact the Board’s exercise of discretion, including the merits. Fintiv 5−6. We consider these factors to assess “whether efficiency, fairness, and the merits support the exercise of authority to deny institution in view of an earlier trial date in the parallel proceeding.” Id. at 6. In” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“parties, we do not find the merits to be particularly strong on the current record. For example, limitation [1-4] recites, in part, “a locking nut having . . . an external thread on an outside surface of the locking nut.” Ex. 1001, 9:46–47. In alleging obviousness based in part on Orphanos, Petitioner equates the claimed “locking nut” to Orphanos’s collet 230 in a first embodiment of Orphanos, or Orphanos’s collet portion 1052 in a second embodiment of Orphanos. Pet. 37–38. Petitioner acknowledges that the collet and collet portion do not have external threads, but rather are designed to have a snap-fit engagement with the inner sidewall of the baseplate’s central throughbore. Id. at 38. Petitioner argues that modifying the collet and collet portion to have external threads would have been obvious to the skilled artisan in view of Orphanos’s teachings and the knowledge of a person having ordinary skill in the art. Pet. 38–42 (arguing, inter alia, that it would have been “a substitution of a known part for a known problem” and “obvious as a matter of design choice”). Petitioner does not allege that replacing the snap-fit coupling with external threads would either: (1) result in any advantages; or (2) preserve any of Orphanos’s stated benefits of its snap-fit arrangement. See Pet. 34–37. That Petitioner describes no advantages to making its proposed modification potentially undermines Petitioner’s case that the skilled artisan would have done so. Cf. Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit . . . should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another. Instead, the benefits, both lost and gained, should be weighed against one another.”).” slip op. at 16
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITANot reached
“Petitioner’s arguments regarding the central post and locking nut include an implicit claim construction argument that these components need not be separate structures. Pet. 74, 76–81. Patent Owner, on the other hand, would have us interpret the claim to require that they be separate structures. Patent Owner raises credible evidence to support its theory. Specifically, Patent Owner directs us to the language of claim 1, which separately recites “a central screw” and “a locking nut.” Prelim. Resp. 51; see Ex. 1001, 9:44–53. Patent Owner further contends, in view of the claim language, that the claimed central post and locking nut are separate and distinct components. According to Patent Owner, however, Lefebvre’s main head and anchor rod portions are parts of a single monolithic anchoring screw. Prelim. Resp. 53–58. Where a claim lists elements separately, there is a rebuttable presumption that these elements have separate and distinct physical structures. See Google LLC v. EcoFactor, Inc., 92 F.4th 1049, 1058 (Fed. Cir. 2024) (citing Powell v. Home Depot U.S.A., Inc., 663 F.3d 1221, 1231–1232 (Fed. Cir. 2011)). The presumption may be rebutted by the intrinsic record. Id. At this stage, however, Petitioner does not address that claim 1 appears to separately recite a central post and a locking nut, and does not direct us to any portion of the intrinsic record that might rebut the presumption that these elements are, therefore, separate and distinct structures. See Pet. 73–77. Petitioner also argues that the claim terms “baseplate central channel” and “central channel . . . configured to interface with the baseplate” are indefinite. Pet. 95–102. Patent Owner argues that the plain and ordinary meaning of the terms is clear and that Petitioner “had no problem” arguing how the asserted art purportedly rendered the claims obvious. Prelim. Resp. 69–77.” slip op. at 17
- Disclosure Requirements (§112) › Definiteness (Nautilus)Not reached
“Petitioner also argues that the claim terms “baseplate central channel” and “central channel . . . configured to interface with the baseplate” are indefinite. Pet. 95–102. Patent Owner argues that the plain and ordinary meaning of the terms is clear and that Petitioner “had no problem” arguing how the asserted art purportedly rendered the claims obvious. Prelim. Resp. 69–77. In sum, even if Petitioner’s contentions show it is more likely than not that at least one of the claims challenged in the Petition is unpatentable, we find Patent Owner’s arguments identify credible weaknesses in Petitioner’s contentions. Accordingly, we find that that the sixth Fintiv factor is neutral and does not weigh against discretionary denial.” slip op. at 18
Claim construction§ 103 obviousness§ 112 disclosureDiscretionary denialPatents in suitUS 12,023,254 - PTAB · Apr 21, 2025 · IPR2024-01504 · APJ James A Worth · IPR · Institution
The Board instituted IPR on claims 1–4, 6, 7, 9, and 10 on all petitioned grounds, finding a reasonable likelihood that claim 1 is obvious over Iafrate and Kivioja.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“On this preliminary record, we agree with Patent Owner that Petitioner’s asserted level of ordinary skill in the art is higher than warranted when Petitioner argues that a person of ordinary skill “further would have had specific experience with implementing and designing library preparation methods.” Pet. 21–22. However, we disagree with Patent Owner that a POSA only need to “have had experience with DNA sequencing methods” (Prelim. Resp. 8) because an artisan with experience with only pre-NGS sequencing methods would not qualify as a person of ordinary skill. Instead, for purposes of this Decision, we find a person of ordinary skill would have had a Ph.D. in the field of chemistry, molecular biology, or biochemistry. Alternatively, a POSA would have had a B.S. or M.S. degree with three to five years of experience working in any of those fields. The person of ordinary skill would have had experience with NGS sequencing methods and a working knowledge of how those methods functioned. This definition of a person of ordinary skill is consistent with the skill level reflected in the disclosures of the ’357 patent and prior art. We further note that neither aspect of the dispute over the skill level affects our decision to institute review.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“1. “indexing site” Petitioner argues that the ’357 patent defines “indexing site” as a sample index, specifically, “a nucleic acid sequence that acts as an index for multiple polynucleotide samples, thus allowing for the samples to be pooled together into a single sequencing run, which is known as multiplexing.” Pet. 23 (citing Ex. 1004, 4:40–44). Patent Owner does not disagree other than to argue that no claim requires construction. The ’357 patent states: An indexing site is a nucleic acid sequence that acts as an index for multiple polynucleotide samples, thus allowing for the samples to be pooled together into a single sequencing run, which is known as multiplexing. provide a definition for “indexing site,” and we construe the term in accordance therewith.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“3. “identifying sequence reads with identical identifier and target sequences as duplicates” Although the parties do not request construction of this limitation, we note that the parties may wish to address the construction of this limitation after institution. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (claims are construed only to the extent necessary the term “duplicates” means that the sequences are identical. We observe that the ’357 patent states: “A duplicate sequencing read can be a sequencing read with the same identifier site and target sequence as another sequencing read in the population of sequencing reads.” Ex. 1004, 4:12–15. The claim does not use the exact wording as the Specification.4” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“4. “comprising” The parties may address the meaning of the transitional phrase “comprising” and whether the prior art meets the claim if the prior art discloses a method of identifying as duplicates those sequence reads with identical labels and target fragments and, in addition also identifies other sequence reads as duplicates, including sequence reads with some mutations resulting from PCR or SBS error. See Ex. 1079 ¶ 117. On this preliminary record, we construe “comprising” as an open-ended transition that is not limited to the listed steps. See Vivid Techs., Inc., 200 F.3d at 811.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · GrahamPatents in suitUS 11,098,357 - Yita LLC / Jinrong (SH) Automotive Accessory Industrial Development Co. Ltd. v. Macneil IP LLCAll claims unpatentablePTAB · Jun 6, 2024 · IPR2023-00173 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1–6 are unpatentable as obvious: claims 1–2 over Stanesic, Rothkop, and Cicotte; claims 3–6 over that combination with Lee, Fisker, Gruenwald, or Fu, respectively.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would” slip op. at 12
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer not foundDecided for petitioner
“tray is “deeply concave” but fails to direct us to any part of the Specification using the term “deeply concave” let alone a clearly stated definition of “deeply concave” in the context of a vehicle floor tray. The response to office action, cited by Patent Owner, refers to the tray as concave not deeply concave and thus, does not support Patent Owner’s proposed construction. Ex. 2097, 11. For these reasons, to the extent that Patent Owner relies on the prosecution history as a disclaimer of the full scope of claims, we find that the cited response to the office action does not constitute “a clear and unmistakable disclaimer of claim scope.” Uship, 714 F. 3d at 1315.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“As explained below in our conclusion on motivation to combine, we” slip op. at 56
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“argument that Fu is not analogous art. PO Resp. 51. Dr. Kurfess first testifies that an ordinarily skilled artisan “never would have looked to Fu, or anything related to those fields, let alone micro-devices such as hearing aid shells to solve problems related to the automotive industry.” Ex. 2023 ¶ 144. Dr. Kurfess then testifies that “Fu is a disclosure for a hearing aid shell . . . and a [person of ordinary skill in the art] . . . would not consider the art of medical devices when trying to solve problems with vehicle floor mats.” Id. ¶ 188. Lastly, Dr. Kurfess testifies that “I completely disagree with Mr. Perreault’s conclusion that ‘a [person of ordinary skill in the art]” slip op. at 97
Patent outcomesUS 9,138,917 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,138,917 - Yita LLC / Jinrong (SH) Automotive Accessory Industrial Development Co. Ltd. v. Macneil IP LLCAll claims unpatentablePTAB · Jun 6, 2024 · IPR2023-00172 · APJ Arthur M Peslak · IPR · Final written decision
Claims 1–6 are unpatentable as obvious over the stated combinations of Stanesic, Rothkop, and the respective additional references.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would have had a bachelor’s degree in mechanical engineering, industrial design, or a closely related field, or equivalent formal training, education, or practical experience in a field relating to product design, CAD, or manufacturing.” Pet. 13 (citing Ex. 1003 ¶¶ 27–28). Petitioner further contends that the person of ordinary skill in the art “would also have a minimum of three to five years of experience in plastics engineering, CAD, manufacturing, plastic product design, or a related industry,” but that “a higher level of training or practical experience might make up for less education, and vice-versa.” Id. Patent Owner contends that a person of ordinary skill in the art would have “a Bachelor of Science in mechanical engineering, industrial design, or a closely related field, or equivalent formal training education or practical experience in a field relating to product design, CAD, or manufacturing.” PO Resp. 9. Patent Owner further contends that such an ordinarily skilled artisan “would also have two or more years of manufacturing/industrial experience in the automotive aftermarket art.” Id. Petitioner replies that its “level of skill is more appropriate given the claims’ focus on three-dimensional scanning and modeling (which apply to many industries).” Pet. Reply 9 (citing Ex. 1001, claim 1; Ex. 1055 ¶¶ 7– 13). According to Petitioner, however, “the claims would have been obvious even under [Patent Owner]’s proposed skill level.” Id. (citing Ex. 1055 ¶ 13). Petitioner refers to Dr. Kurfess’s declaration testimony as admitting that three-dimensional scanning and modeling are pertinent to the ’655 patent. Id. at 10 (citing Ex. 2023 ¶ 18). In the Sur-reply, Patent Owner contends that Petitioner’s definition of” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable
“[A] conclusion of obviousness requires a reasonable expectation of success.” Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1365 (Fed. Cir. 2016) (citing KSR, 550 U.S. at 421). Further, “the ‘predictable result’ discussed in KSR refers not only to the expectation that prior art elements are capable of being physically combined, but also that the combination would have worked for its intended purpose.” DePuy Spine, 567 F.3d at 1326 (citations omitted). “Obviousness does not require absolute predictability of success . . . all that is required is a reasonable expectation of success.” In re O’Farrell, 853 F.2d 894, 903–904 (Fed. Cir. 1988) (citations omitted). With these principles in mind, we evaluate the parties’ respective contentions. Patent Owner’s argument that there is no reasonable expectation of success in the proposed combination revolve around the scanning of a vehicle footwell. The ’655 patent describes that “points on the vehicle foot well for which the floor tray is to be manufactured are digitally measured and captured. Preferably this step uses a coordinate measuring machine (CMM).” Ex. 1001, 16:41–44. Further, the “FARO® Arm has been efficacious in obtaining these data using a contact method.” Id. at 16:47–48. The company manufacturing the FARO Arm was “[f]ounded in 1982 to provide portable CMMs in the medical industry” and “transitioned to the worldwide industrial market in 1993.” Ex. 1003 ¶ 49. Patent Owner does slip op. at 49
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“argument that Fu is not analogous art. PO Resp. 51. Dr. Kurfess first testifies that an ordinarily skilled artisan “never would have looked to Fu, or anything related to those fields, let alone micro-devices such as hearing aid shells to solve problems related to the automotive industry.” Ex. 2023 ¶ 144. Dr. Kurfess then testifies that “Fu is a disclosure for a hearing aid shell . . . and a [person of ordinary skill in the art] . . . would not consider the art of medical devices when trying to solve problems with vehicle floor mats.” Id. ¶ 188. Lastly, Dr. Kurfess testifies that “I completely disagree with Mr. Perreault’s conclusion that ‘a [person of ordinary skill in the art] would have been motivated to turn to Fu as an effective way to implement Stanesic’s reservoir’” and “[c]ommon sense dictates that a prior art disclosure for a custom hearing-aid would not inform a [person of ordinary” slip op. at 98
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“Collateral estoppel precludes a party from relitigating an issue when: (1) a prior action presents an identical issue; (2) the prior action actually litigated and adjudged that issue; (3) the judgment in the prior action necessarily required determination of the identical issue; and (4) the prior action featured full representation of the estopped party.” slip op. at 109
Patent outcomesUS 8,899,655 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,899,655 - Painteq, LLC v. Orthocision, Inc.All claims unpatentablePTAB · Dec 1, 2023 · IPR2023-00451 · APJ Michael A Valek · IPR · Final written decision
Claims 1–23 are unpatentable as obvious over Vestgaarden-981, Vestgaarden-818, and Lins, with Paltzer additionally applied to claims 6, 7, and 10–23.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s description of the level of ordinary skill in the art is sufficiently supported by the record. Therefore, we apply that understanding in our analysis herein.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner submits that the parties have submitted joint claim construction in the Florida litigation, and asserts that “[t]he grounds set forth in this [P]etition render the challenged claims obvious under either party’s construction.” Pet. 8 (citing Ex. 1002 ¶ 34; Ex. 1017). Nevertheless, Petitioner urges that “express construction is not necessary.” Id. at 7. We agree that no express construction is required for this decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999).” slip op. at 9
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“We agree with Petitioner. Figures 30, 32A and 32B in the Specification depict a working channel with tangs 180a and 180b. See Ex. 1001, Figs. 30, 32A–B. These figures and all of the related description in the Specification describing a working channel with tangs appear in the Parent (Ex. 1006, Figs. 30, 32A–B, 3:17–21, 6:47–54, 15:25–51), but not in the Grandparent. See also Ex. 1002 ¶¶ 42–43 (explaining the same). Accordingly, the Grandparent application does not provide sufficient written description for the limitations requiring that the working channel have tangs in the independent claims. See Ex. 1001, 42:7 (limitation 1.b.4 “at least one tang on a distal end”), 43:9–11 (limitation 10.b.2 “two bilateral blunt tangs on a distal end”), 44:31–32 (limitation 18.b.2 “plurality of blunt tangs on a distal end”). For this reason, the challenged claims are not entitled to the benefit of the Grandparent’s filing date.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“We find that Petitioner has articulated sufficient reasoning with rational underpinning for combining the asserted references. Vestgaarden- 818 expressly incorporates the teachings of Vestgaarden-981, providing a motivation to use the implant and related tools taught in Vestgaarden-981 in its method for fusing a SI joint. Ex. 1010, 4:10–16. Moreover, we credit Dr. Bovinet’s testimony describing additional reasons for combining Vestgaarden-981’s implant and surgical implants with Vestgaaren-818’s method. Ex. 1002 ¶¶ 67–74. Petitioner’s reasoning for combining Lins’s guidance slots and protrusions is also supported by the evidence of record. Ex. 1002 ¶¶ 77–84. In particular, Dr. Bovinet persuasively testifies that a POSA would have motivated to make this combination because it “enables a surgeon to visually align the guide protrusions on a shaft with the guidance slots of the working channel,” which is “a major improvement” over the flat portion depth stop taught in Vestgaarden-981. Id. ¶ 83; see also id. ¶ 84 (“As someone who has personally performed hundreds of SI joint fusion surgeries, I can attest that the guide protrusions and guidance slots taught in Lins would offer a surgeon a significantly better user experience” as compared to Vestgaarden- 981’s flat portions). Finally, Petitioner has demonstrated that the combination would have produced a “predictable result” and therefore that a (citing Ex. 1002 ¶¶ 76, 85).” slip op. at 21
Patent outcomesUS 11,083,511 unpatentableClaim construction§ 103 obviousness§ 112 disclosurePatents in suitUS 11,083,511 - BTC Corporation v. TG Biotech Co., Ltd.No claims unpatentablePTAB · Nov 13, 2023 · IPR2022-00998 · APJ Ulrike W Jenks · IPR · Final written decision
Claims 1–13 were not shown unpatentable under the asserted obviousness grounds; Patent Owner’s motion to strike Exhibit 1038 was granted.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We are not persuaded by Petitioner’s contention that we should disregard Dr. Naumovski’s testimony because she may have taken a leave of absence from work for a couple of years. The record supports that Dr. Naumovski not only meets the requirements of the person of ordinary skill in the art, but also appears to have relevant knowledge with respect to Gynostemma pentaphylum (“GP”) saponins. See Ex. 2015 (Appendix A). related field, and at least two years of experience using techniques for extraction and characterization of plant-based materials.” PO Resp. 11 (citing Ex. 2015 ¶ 74). Because there are more than 400 species of plants that contain saponins, Patent Owner disagrees that a person of ordinary skill in the art would be familiar with the structure and utility of saponins. Id. The level of skill in the art is a reference point for gauging what would have been obvious based on the reference disclosures. See Okajima, 261 F.3d at 1355. In other words, the lens of the level of ordinary skill in the art does not change a prior art’s disclosure, though it may change one’s understanding of what is disclosed. Patent Owner, however, does not explain how its definition provides a reference point that would meaningfully alter the Petition’s assertions of obviousness. For purposes of this decision, we analyze the asserted prior art with respect to the level of skill set forth by Petitioner, but there would be no difference in the outcome of this Decision if we were to apply the level of skill in the art set forth by Patent Owner. C.” slip op. at 13
- Expert testimonyPatent owner expert creditedDecided for patent owner
“during the full trial, we determine that Petitioner has not shown by a preponderance of the evidence that applying the methods of Kim 460 to the G. pentaphyllum starting material of Razmovski necessarily results in the damulin levels as claimed. We agree with Dr. Naumovski’s explanation that the use of an impure damulin B standard containing a double peak renders the results as shown in Exhibit 1013 unreliable. Ex. 2015 ¶¶ 141–143, 162–173; see Ex. 2007. Dr. Naumovski further explains that the use of an impure standard would require the application of a correction factor, but this correction factor would need to be reassessed as the purity of the standard decreases over time. See Ex. 2015 ¶ 166. As Dr. Naumovski explains that applying a correction factor to the linear regression would result in a shallower slope. Ex. 2015 ¶ 165 (citing 2006, 71:12–73:5; 99:2–9). “Reducing the calibration curve slope increases the amount of damulin B calculated from the experimental extracts.” Ex. 2015 ¶ 165. However, in the Experimental Report-1 the same correction factor for the damulin B standard was used to” slip op. at 41
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Petitioner requests construction of the terms “an effective amount for improving or treating the metabolic syndrome,” which is found in claims 11–13, as meaning “an amount that produces any measurable amount of improvement in the metabolic syndrome” (Pet. 13–15 (citing Ex. 1003 ¶ 91)) and “[a] pharmaceutical composition for improving and treating a metabolic syndrome, comprising at least one of at least 0.7% damulin A and at least 0.5% damulin B . . . and a pharmacologically acceptable carrier or excipient,” which is found in claim 8, as meaning “a pharmaceutical composition that includes an extract with 0.7% and 0.5% of damulin A and damulin B[, respectively,] along with a carrier or excipient” (id. at 15–16 (citing Ex. 1002, 64–65, 251–52, 280; Ex. 1001, 12:15–67, Table 2)). Patent Owner argues that “constructions are not necessary.” PO Resp. 11–12. We agree with Patent Owner and determine that it is not necessary for purposes of this Decision to construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (only terms” slip op. at 15
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“Obviousness does not require absolute predictability of success . . . all that is required is a reasonable expectation of success.” In re Droge, 695 F.3d 1334, 1338 (Fed. Cir. 2012) (quoting In re Kubin, 561 F.3d 1351, 1360 (Fed. Cir. 2009) (citing In re O’Farrell, 853 F.2d 894, 903–04 (Fed.Cir.1988)); Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359 (Fed. Cir. 2016) (explaining that the expectation of success issue involves a showing of “a reasonable expectation of achieving what is claimed”) (emphasis added). Here, Petitioner relies on Kim 460 to show that heating ginseng, which contains the ginsenosides Rb1, Rb2, Rc, Rd, Rg3, and Rg5, results in a teaches that ginseng with the higher Rg3 and Rg5 content is 50-fold more potent in their vasodilation studies than the non-treated samples. Razmovski teaches that G. pentaphyllum contains over 100 saponins and eight of those saponins are the same as protoparaxadiol-type ginsenosides Rb1, Rc, Rb3, Rd, F2, Rg3, malonyl-Rb1, and malonyl-Rd that are found in P. ginseng. Ex. 1007, 4. Knowing that G. pentaphyllum also contains ginsenosides Rb1, Rb2, Rc, Rd, Rg3, and Rg5, we find Petitioner’s conclusion that heating a G. pentaphyllum extract that contains these ginsenosides would similarly increase the ginsenoside levels of Rg3 and Rg5 is a reasonable inference from the cited references. Based on the teachings in Kim 460, we agree with Petitioner that it would have been reasonable to expect that the same source material, although derived from a different plant, would behave similarly to heat treatment. See Pet. 24. Because G. pentaphyllum is a less expensive starting material, we also agree with Petitioner that there is sufficient motivation to substitute G. pentaphyllum for ginseng in the methods of Kim 460. slip op. at 29
Patent outcomesUS 8,357,786 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,357,786
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.