PTAB
Advanced fields
34 decisions · 430msnewest first
  • PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

    The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

      “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

    • BurdenNot shown unpatentable

      “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

    • Obviousness (§103) › Analogous artAnalogous artOther

      “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

    Patent outcomesUS 9,421,713 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,421,713
  • Adobe Inc. v. Jonathan E. JaffeNo claims unpatentable
    PTAB · Mar 4, 2026 · IPR2024-01352 · APJ Bach V Hoang · IPR · Final written decision

    Claims 1–6 were not shown unpatentable under any asserted §103 ground because the references did not teach monitoring the physical coupling between the sensor and memory.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “The Institution Decision adopted and applied Petitioner’s proposed level of ordinary skill because Petitioner’s “definition generally comports with the level of skill necessary to understand and implement the teachings” slip op. at 11

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

      “The parties present various claim construction arguments, disputing the meaning of three limitations recited in claim 1: “a sensor, which is tightly coupled to said memory”; “monitoring the integrity of the tight coupling between said memory and said sensor”; and “based on.” See Pet. 9–14; PO Resp. 5–12; Pet. Reply 4–9; PO Sur-reply 4–11. For purposes of this Decision, we do not need to discuss the construction of “based on.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). As explained below, this Decision turns on whether Glass or Rieger discloses limitation [1c] reciting “monitoring the integrity of the tight coupling between said memory and said sensor.” Ex. 1001, 20:65–66; see infra §§ II.C.2, II.E.1, II.F. That limitation recites an element which overlaps with the earlier-recited limitation “a sensor, which is tightly coupled to said memory.” To reach our decision, we need only provide a limited discussion of two of the parties’ claim construction arguments. Our analysis follows.” slip op. at 13

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “said integrity is compromised, then also providing an indication of said compromised integrity.” Ex. 1001, 20:65–21:2. Although Petitioner points out that the limitation does not expressly recite “‘specifically’ monitoring the tight coupling” (Pet. Reply 8), the structure of the clause suggests that the tight coupling is specifically monitored. At a high level, the limitation is straightforward in its recitation that the integrity being monitored is “of the tight coupling” (Ex. 1001, 20:65–66 (emphasis added)), plainly suggesting that the tight coupling is specifically monitored. More granularly, breaking the relevant clause down to its grammatical parts, the clause recites a gerund (“monitoring”) acting on a direct object (“the integrity”) which is modified by a prepositional phrase (“of the tight coupling”). Notably, the object of the preposition (“of”) is “the tight coupling.” Altogether, this reads that the integrity being monitored is specifically of the tight coupling. Also, the claim recites that “if said integrity is compromised, then also providing an indication of said compromised integrity.” Therefore, from the claim language we know that the “integrity” of the tight coupling is something that may be “compromised,” which is consistent with Patent Owner’s proposed construction of determining whether the physical coupling has been “accessed or disturbed.” Petitioner’s interpretation effectively inserts additional language into the limitation such that the limitation includes monitoring the integrity of a device containing or surrounding the tight coupling, such as a camera (or camera housing), e.g., “monitoring the integrity of a camera that includes the tight coupling.” But, because the plain reading and the structure of the limitation reads that it is specifically the tight coupling’s integrity—not another physical structure, like a camera—which is being monitored, a monitored is not consistent with the language of the claim. See PO Resp. 9 (arguing that “Petitioner’s construction is improper because the claim language explicitly requires monitoring the physical coupling between the memory and the sensor as opposed to some third structure” (emphasis omitted)).” slip op. at 17

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “package 50 does not specifically monitor the integrity of the coupling between Glass’s sensor and the memory and, instead, argues that Glass detects tampering of all “the components and interconnections contained in that packaging,” e.g., control logic 44, cropper 46, compressor 47, MUX 45, code generator 48, and the various interconnections between those components. See Pet. Reply 16; Ex. 1005, 5:13–41. As explained above, we construe “monitoring the integrity of the tight coupling between said memory and said sensor” to mean determining whether the physical 7 Petitioner does not assert that a person of ordinary skill in the art would have been motivated to modify Glass’s device in any way; Petitioner solely argues that Glass teaches limitation [1c], based on Petitioner’s proposed claim construction. See Pet. 30–32 (“Glass discloses this limitation.”); Pet. Reply 16–17 (“Glass and Rieger disclose the ‘monitoring’ step.”). disturbed, which specifically requires monitoring the physical coupling between the sensor and the memory. See supra § II.C.2. As we agree with Patent Owner that this limitation requires monitoring the physical coupling between the sensor and the memory, monitoring Glass’s tamper resistant package 50 does not teach or disclose “monitoring the integrity of the tight coupling between said memory and said sensor.” Accordingly, we determine that Petitioner fails to show that Glass teaches or suggests [1c] monitoring the integrity of the tight coupling between said memory and said sensor when said at least one internal and unique parameter is generated, and, if said integrity is compromised, then also providing an indication of said compromised integrity, as required by claim 1. Consequently, we determine that Petitioner has not shown, by a preponderance of the evidence, that the subject matter of claim 1 would have been obvious over Glass.8” slip op. at 30

    Patent outcomesUS 6,757,828 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 6,757,828
  • PTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision

    Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for petitioner

      “On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

      “Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14

    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29

    Patent outcomesUS 9,023,203 not shown unpatentable
    Claim construction§ 103 obviousnesscites Graham
    Patents in suitUS 9,023,203
  • PTAB · Apr 22, 2024 · IPR2023-00074 · APJ Sheridan K Snedden · IPR · Final written decision

    Claims 1, 2, 5–8, 11, and 15 were not shown unpatentable because the cited May references did not sufficiently disclose or guide a skilled artisan to the claimed LCR fragments.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner does not dispute Petitioner’s description of the level of ordinary skill in the art. See PO Resp. Because Petitioner’s uncontested definition of one of ordinary skill in the art is reasonable and consistent with the ’061 patent and the prior art of record, we adopt Petitioner’s definition for purposes of this Decision.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Petitioner states that “that no term of the ’061 patent requires construction to resolve the challenges in this Petition.” Pet. 25 (citing Ex. 1002 ¶¶ 50–51) (footnote omitted). Patent Owner does not argue for any express claim constructions. See PO Resp. Based upon our review of the current record, we determine that no claim terms require express construction for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, construed, “and only to the extent necessary to resolve the controversy.”).” slip op. at 8

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference not prior artNot shown unpatentable

      “represents the inventors’ own work, and thus the May Thesis is not prior art to the ’061 patent. PO Resp. 14–15. The May Thesis is authored by Chad May, who is a listed inventor of the ’061 patent. Id.; Ex. 1004, 3; Ex. 1001, code (75). Thus, the May Thesis represents the work of one of the ’061 inventors and is therefore ineligible as prior art under 35 U.S.C. § 102(a) based on the July 1, 2002 priority date. See, e.g., In re Katz, 687 F.2d 450, 454–455 (CCPA 1982) (a prior publication by inventors or a subset of the inventors does not qualify as prior art under 102(a)). With respect to 35 U.S.C. § 102(b), we find that the May Thesis is ineligible as prior art, even assuming that the Challenged Claims are not entitled to receive benefit of an earlier filing date. Petitioner provides evidence that the May Thesis was publicly available as of November 26, 2001. Pet. 17 (citing Ex. 1036 ¶¶ 1–26; Ex. 1002 ¶ 60). Patent Owner does not dispute that evidence. Based on the undisputed November 26, 2001 public availability date, the May Thesis represents a disclosure less than one year before the asserted effective filing date, i.e., July 1, 2002. Based on that timing and because the disclosure was made by the inventor, the May Thesis is not available as prior art to the Challenged Claims under 35 U.S.C. §102(b).” slip op. at 11

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureNot shown unpatentableInherency not foundNot shown unpatentable

      “summarized above, we determine that the May Article fails to disclose the restriction sites surrounding the BstXI and SnaBI HS2-, BamHI and HindIII HS3-, or BamHI and BanII HS4-spanning nucleotide fragments, as required by the challenged claims. According to Petitioner, that limitation is inherently disclosed by the May Article’s description of the lengths of the HS2, HS3, and HS4 fragments in the TNS9 vector and its depiction of those fragments on a map of the LCR. Pet. 28. To support its inherency argument, Petitioner relies on knowledge in the art, i.e., the availability of the entire map of the LCR region, and the availability of restriction enzymes, including BstX1, SnaBI, BamHI, HindIII, and BanII. Id. at 39–40 (citing Kennametal, 780 F.3d at 1381–83). Based on that combined information, Petitioner contends that a POSA would “have been able to map all of the possible restriction sites in the regions flanking the cores of HS2, HS3, and HS4.” Id. Petitioner asserts further that “[g]iven the May Article’s disclosure regarding the size and location of TNS9’s HS2, HS3, and HS4 fragments, a POSA would have placed these fragments onto the restrictionsite map of the LCR” that was available at the time, and would have identified only six possible combinations of restriction enzyme fragments, including the one recited in claim 1. Id. Upon closer inspection, however, we appreciate from the testimony of Petitioner’s declarant, Dr. Bungert, that the process involved in arriving at those six possible combinations is predicated on numerous assumptions guiding a number of exacting steps to be performed in order to achieve the the claimed LCR fragment would have involved the steps of (a) placing fragments that are the disclosed size of the HS2, HS3, and HS4 fragments from the TNS9 vector in the May Article onto the known restriction-site map of the LCR; (b) comparing those fragments to the “‘drawn to scale’ map” in the May Article; and then (c) identifying various fragments and determining which ones are consistent with the May Article’s description and match up with the fragments on the May Article’s drawn to scale map. Ex. 1002 ¶¶ 143–156. To identify the fragments consistent with the May Article’s description, it was necessary for Dr. Bungert to use certain assumptions that exclude unfavorable enzymes, such as using a range of ± 20 bp in order to identify fragments with lengths that are within 20 bp of the fragments reported in the May Article. Id. In view of the number of assumptions and steps required to get from what is disclosed in the May Article to arrive at the alleged “six possible LCRs (i.e., combination of HS2, HS3, and HS4 fragments based on the TNS9 LCR disclosed in the May Article)—including the LCR recited in claim 1,” Ex. 1002 ¶ 156, we do not find that Petitioner has demonstrated that fragments having the restriction sites recited in claim 1 would have been “at once envisaged” by a skilled artisan as argued by Petitioner. Pet. 39–40.” slip op. at 16

    Patent outcomesUS 8,058,061 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 8,058,061
  • PTAB · Apr 22, 2024 · IPR2023-00070 · APJ Sheridan K Snedden · IPR · Final written decision

    Claims 1, 10, 19, and 22 were not shown unpatentable because the May Thesis was not prior art and the May Article and May Abstract did not establish the claimed LCR fragments.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner does not dispute Petitioner’s description of the level of ordinary skill in the art. See PO Resp. Because Petitioner’s uncontested definition of one of ordinary skill in the art is reasonable and consistent with the ’179 patent and the prior art of record, we adopt Petitioner’s definition for purposes of this Decision.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Based upon our review of the current record, we determine that no claim terms require express construction for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (Only those terms that are in controversy need be construed, “and only to the extent necessary to resolve the controversy.”).” slip op. at 8

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable

      “the ’179 patent. Id.; Ex. 1004, 3; Ex. 1001, code (75). Thus, the May Thesis represents the work of one of the ’179 inventors and is therefore ineligible as prior art under 35 U.S.C. § 102(a) for challenged claims 1, 19, and 22. See, e.g., In re Katz, 687 F.2d 450, 454–455 (CCPA 1982) (a prior publication by inventors or a subset of the inventors does not qualify as prior art under 102(a)). With respect to 35 U.S.C. § 102(b), we find that the May Thesis is ineligible as prior art, even assuming that claims 1, 19, and 22 are not entitled to receive benefit of an earlier filing date. Petitioner provides evidence that the May Thesis was publicly available as of November 26, 2001. Pet. 17 (citing Ex. 1036 ¶¶ 1–26; Ex. 1002 ¶ 60). Patent Owner does not dispute that evidence. Based on the undisputed November 26, 2001 public availability date, the May Thesis represents a disclosure less than one year before the asserted effective filing date, i.e., the July 1, 2002, for claims 1, 19, and 22 challenged with this reference. Based on that timing and because the disclosure was made by the inventor, the May Thesis is not available as prior art to challenged claims 1, 19, and 22 under 35 U.S.C. §102(b). Petitioner has not established that the May Thesis is prior art to claims” slip op. at 11

    • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

      “summarized above, we determine that the May Article fails to disclose the restriction sites surrounding the BstXI and SnaBI HS2-, BamHI and HindIII HS3-, or BamHI and BanII HS4-spanning nucleotide fragments, as required by the challenged claims. According to Petitioner, that limitation is inherently disclosed by the May Article’s description of the lengths of the HS2, HS3, and HS4 fragments in the TNS9 vector and its depiction of those fragments on a map of the LCR. Pet. 28. To support its inherency argument, Petitioner relies on knowledge in the art, i.e., the availability of the entire map of the LCR region, and the availability of restriction enzymes, including BstX1, SnaBI, BamHI, HindIII, and BanII. Id. at 30–31 (citing Kennametal, 780 F.3d at 1381–83). Based on that combined information, Petitioner contends that a POSA would “have been able to map all of the possible restriction sites in the regions flanking the cores of HS2, HS3, and HS4.” Id. Petitioner asserts further that “[g]iven the May Article’s disclosure regarding the size and location of [TNS9’s] HS2, HS3, and HS4 fragments, a POSA would have placed these fragments onto the restrictionsite map of the LCR” that was available at the time, and would have identified only six possible combinations of restriction enzyme fragments, including the one recited in claim 1. Id. Upon closer inspection, however, we appreciate from the testimony of Petitioner’s declarant, Dr. Bungert, that the process involved in arriving at those six possible combinations is predicated on numerous assumptions guiding a number of exacting steps to be performed in order to achieve the claimed LCR fragment. According to Dr. Bungert, the process for making the claimed LCR fragment would have involved the steps of (a) placing fragments that are the disclosed size of the HS2, HS3, and HS4 fragments from the TNS9 vector in the May Article onto the known restriction-site map of the LCR; (b) comparing those fragments to the “‘drawn to scale’ map” in the May Article; and then (c) identifying various fragments and determining which ones are consistent with the May Article’s description and match up with the fragments on the May Article’s drawn to scale map. Ex. 1002 ¶¶ 112–117. To identify the fragments consistent with the May Article’s description, it was necessary for Dr. Bungert to use certain assumptions that exclude unfavorable enzymes such as using a range of ± 20 bp in order to identify fragments with lengths that are within 20 bp of the fragments reported in the May Article. Id. In view of the number of assumptions and steps required to get from what is disclosed in the May Article to arrive at the alleged “six possible LCRs (i.e., combination of HS2, HS3, and HS4 fragments based on the TNS9 LCR disclosed in the May Article)—including the LCR recited in claim 1,” Ex. 1002 ¶ 117, we do not find that Petitioner has demonstrated that fragments having the restriction sites recited in claim 1 would have been “at once envisage[d]” by a skilled artisan as argued by Petitioner. Pet. 30–31.” slip op. at 16

    Patent outcomesUS 7,541,179 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 7,541,179
  • PTAB · Apr 4, 2024 · IPR2022-01496 · APJ Mitchell G Weatherly · IPR · Final written decision

    Claims 1–21 were not shown unpatentable under either §103 ground because the cited combinations failed to teach required claim limitations.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “including mobile device applications.” Pet. 8 (quoting Ex. 1003 ¶ 20). Petitioner also contends that “[m]ore education can supplement practical experience and vice versa.” Id. Patent Owner adds that a POSA could also have a bachelor’s degree in computer science, but otherwise agrees with Petitioner’s definition of a POSA. PO Resp. 16 (citing Ex. 2004 ¶¶ 74–78). We apply Petitioner’s proposed level of skill in the art, but, add that the person of ordinary skill in the art could also have a bachelor’s degree in computer science because that is consistent with the problems addressed in the ’187 patent and the prior art. Our Decision, however, would not be affected if we adopted Petitioner’s level of skill in the art. D. Claims 1–21: Obviousness in View of Poole and Hammad” slip op. at 9

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “We credit Dr. Long’s uncontroverted testimony on the topic of “authentication,” which he supports with citations to objective evidence. Ex. 2004 ¶¶ 26–31 (citing Ex. 2020, 594, 595, 626, 627, 632, 633, 636). He describes the three types of user authentication as being based upon what a user “knows,” “has,” or “is.” Ex. 2004 ¶ 28 (citing Ex. 2020, 627). He testifies that authentication based on what a user “knows” involves entering a user name and password or answering security questions. Id. ¶ 29 (citing Ex. 2020, 632–633). He further explains that the second type of authentication based on a user providing something that they “have,” involves the user providing, for example, “a key to a door” or an “ATM card.” Id. ¶ 30 (citing Ex. 2020, 633). Regarding the last way of authentication, Dr. Long testifies that the third method, providing something that the user “is,” such as a user’s biometric characteristic like a fingerprint or image of a face. Id. ¶ 31 (citing Ex. 2020, 636).” slip op. at 23

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “However, none of the cited material within Poole (¶¶ 32, 48, 88, 94) supports Petitioner’s contention. Poole’s ¶ 32 describes sensors 214 having a “sensor identifier” that “may be used by . . . customer device 220 . . . to identify and/or locate sensor 214,” but wholly fails to describe scanning a machine-readable element to decode location information. Ex. 1006 ¶ 32. Poole’s ¶ 48 explains: information contained in signals transmitted by sensors 214 may include a Bluetooth identifier, Bluetooth profile, sensor identifier, and/or sensor position. The sensor identifier of each sensor 214 may be stored in association with a known position of sensor 214 in memory 306, storage medium 308, and/or database 314. Customer device 220 may retrieve a position or sensor identifier of sensor 214 located near customer device 220 based on the stored information. Id. ¶ 48. This paragraph similarly fails to describe that customer device 220 scans a barcode to decode location information, but instead describes device 220 receiving a wireless signal from sensor 214 used to obtain the position of the sensor from a database. Id. Barcodes are not discussed at all in Poole’s ¶ 48. Id.” slip op. at 17

    Patent outcomesUS 10,368,187 not shown unpatentable
    § 103 obviousnesscites Phillips · Graham
    Patents in suitUS 10,368,187
  • PTAB · Apr 3, 2024 · IPR2022-01509 · APJ Arthur M Peslak · IPR · Final written decision

    Claims 1–19 were not shown unpatentable over Poole and Hammad because the combination did not teach the claimed machine-readable element, and Poole did not teach the claimed scanning and decoding.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for petitioner

      “priority date would have had a ‘bachelor’s degree in electrical engineering (or equivalent subject) together with one to two years of experience in research, design, development, and/or testing of location-based systems including mobile device applications,’” also noting that “[m]ore education can supplement practical experience and vice versa.” Pet. 7 (citing Ex. 1003 ¶ 20). Patent Owner adds that a person of ordinary skill in the art “could also have a bachelor’s degree in computer science, but otherwise agrees with Petitioner’s definition.” PO Resp. 15 (citing Ex. 2004 ¶¶ 54–58). We apply Petitioner’s proposed level of skill in the art, but, add that the person of ordinary skill in the art could also have a bachelor’s degree in computer science because that is consistent with the problems addressed in the ’188 patent and the prior art. Our Decision, however, would not be affected if we adopted Petitioner’s level of skill in the art.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “Neither party proposes a specific construction for any claim term. Pet. 8–9; PO Resp. 17. Based on our review of the record, we determine it is not necessary to construe expressly any claim term for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “Based on the disclosure of Poole and Hammad, we find that Petitioner’s argument that an ordinarily skilled artisan “would have understood that the QR code generated and displayed by Hammad would perform the same function as the barcode taught by Poole” (Pet. 16) is not supported by the evidence of record. Poole does not teach that a user can initiate a purchase transaction by scanning Poole’s barcode. Poole discloses that a bar code on sensor 214 can be scanned to identify the sensor and that a 5 Petitioner states: “[t]o the extent that Poole does not expressly disclose a ‘machine readable element generator . . .’, Hammad does.” Pet. 13. To the extent that this statement can be construed as an argument that Poole alone satisfies limitation 1[d], Petitioner does not direct us to any disclosure that Poole teaches “a machine-readable element generator.” See Pet. 11–13. Petitioner relies on Poole’s disclosure in paragraph 94 of “scanning a bar code.” Id. at 12. Poole’s paragraph 94 does not address how the barcode is generated. Ex. 1006 ¶ 94. Consequently, we determine that Petitioner has not met its burden to show that Poole alone teaches “a machine-readable element generator” as recited in limitation 1[d]. bar code on a merchandise item is scanned to identify the merchandise item as part of the store inventory management process. Ex. 1006 ¶¶ 94, 97. Petitioner, thus, does not persuade us that Hammad’s use of a QR code to initiate a purchase transaction is functionally equivalent to the use of Poole’s barcode.” slip op. at 26

    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “Mr. Williams provides testimony that cites to the same evidence as the Petition and similarly concludes that Hammad’s QR code performs the same function as the barcode taught by Poole. Ex. 1003 ¶¶ 103–105. Because we find that Poole and Hammad themselves fail to support this conclusion, his testimony is unsupported and thus entitled to little, if any, weight. Additionally, he testifies that Poole’s mobile application scans the bar code. Id. ¶ 118. His testimony that Poole’s mobile application scans the barcode, like the Petition, relies on paragraphs 32 and 94 of Poole. Although Poole describes its customer device 220 wirelessly receiving “a coordinate position” of sensor 214, Poole does not describe its customer device 220 receiving location information by scanning a barcode. Ex. 1006 ¶ 32. When Poole does describe using a barcode to convey sensor identifiers including location information for the sensor, it does so in the context of its description of inventory management, but not in connection with the customer’s use of customer device 220. Id. ¶¶ 94, 95. Consequently, Mr. Williams’s testimony on this point is entitled to little, if any, weight because it is not supported by paragraphs 32 and 94 of Poole.” slip op. at 27

    Patent outcomesUS 10,368,188 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,368,188
  • PTAB · Nov 13, 2023 · IPR2022-00998 · APJ Ulrike W Jenks · IPR · Final written decision

    Claims 1–13 were not shown unpatentable under the asserted obviousness grounds; Patent Owner’s motion to strike Exhibit 1038 was granted.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “We are not persuaded by Petitioner’s contention that we should disregard Dr. Naumovski’s testimony because she may have taken a leave of absence from work for a couple of years. The record supports that Dr. Naumovski not only meets the requirements of the person of ordinary skill in the art, but also appears to have relevant knowledge with respect to Gynostemma pentaphylum (“GP”) saponins. See Ex. 2015 (Appendix A). related field, and at least two years of experience using techniques for extraction and characterization of plant-based materials.” PO Resp. 11 (citing Ex. 2015 ¶ 74). Because there are more than 400 species of plants that contain saponins, Patent Owner disagrees that a person of ordinary skill in the art would be familiar with the structure and utility of saponins. Id. The level of skill in the art is a reference point for gauging what would have been obvious based on the reference disclosures. See Okajima, 261 F.3d at 1355. In other words, the lens of the level of ordinary skill in the art does not change a prior art’s disclosure, though it may change one’s understanding of what is disclosed. Patent Owner, however, does not explain how its definition provides a reference point that would meaningfully alter the Petition’s assertions of obviousness. For purposes of this decision, we analyze the asserted prior art with respect to the level of skill set forth by Petitioner, but there would be no difference in the outcome of this Decision if we were to apply the level of skill in the art set forth by Patent Owner. C.” slip op. at 13

    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “during the full trial, we determine that Petitioner has not shown by a preponderance of the evidence that applying the methods of Kim 460 to the G. pentaphyllum starting material of Razmovski necessarily results in the damulin levels as claimed. We agree with Dr. Naumovski’s explanation that the use of an impure damulin B standard containing a double peak renders the results as shown in Exhibit 1013 unreliable. Ex. 2015 ¶¶ 141–143, 162–173; see Ex. 2007. Dr. Naumovski further explains that the use of an impure standard would require the application of a correction factor, but this correction factor would need to be reassessed as the purity of the standard decreases over time. See Ex. 2015 ¶ 166. As Dr. Naumovski explains that applying a correction factor to the linear regression would result in a shallower slope. Ex. 2015 ¶ 165 (citing 2006, 71:12–73:5; 99:2–9). “Reducing the calibration curve slope increases the amount of damulin B calculated from the experimental extracts.” Ex. 2015 ¶ 165. However, in the Experimental Report-1 the same correction factor for the damulin B standard was used to” slip op. at 41

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

      “Petitioner requests construction of the terms “an effective amount for improving or treating the metabolic syndrome,” which is found in claims 11–13, as meaning “an amount that produces any measurable amount of improvement in the metabolic syndrome” (Pet. 13–15 (citing Ex. 1003 ¶ 91)) and “[a] pharmaceutical composition for improving and treating a metabolic syndrome, comprising at least one of at least 0.7% damulin A and at least 0.5% damulin B . . . and a pharmacologically acceptable carrier or excipient,” which is found in claim 8, as meaning “a pharmaceutical composition that includes an extract with 0.7% and 0.5% of damulin A and damulin B[, respectively,] along with a carrier or excipient” (id. at 15–16 (citing Ex. 1002, 64–65, 251–52, 280; Ex. 1001, 12:15–67, Table 2)). Patent Owner argues that “constructions are not necessary.” PO Resp. 11–12. We agree with Patent Owner and determine that it is not necessary for purposes of this Decision to construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (only terms” slip op. at 15

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

      “Obviousness does not require absolute predictability of success . . . all that is required is a reasonable expectation of success.” In re Droge, 695 F.3d 1334, 1338 (Fed. Cir. 2012) (quoting In re Kubin, 561 F.3d 1351, 1360 (Fed. Cir. 2009) (citing In re O’Farrell, 853 F.2d 894, 903–04 (Fed.Cir.1988)); Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359 (Fed. Cir. 2016) (explaining that the expectation of success issue involves a showing of “a reasonable expectation of achieving what is claimed”) (emphasis added). Here, Petitioner relies on Kim 460 to show that heating ginseng, which contains the ginsenosides Rb1, Rb2, Rc, Rd, Rg3, and Rg5, results in a teaches that ginseng with the higher Rg3 and Rg5 content is 50-fold more potent in their vasodilation studies than the non-treated samples. Razmovski teaches that G. pentaphyllum contains over 100 saponins and eight of those saponins are the same as protoparaxadiol-type ginsenosides Rb1, Rc, Rb3, Rd, F2, Rg3, malonyl-Rb1, and malonyl-Rd that are found in P. ginseng. Ex. 1007, 4. Knowing that G. pentaphyllum also contains ginsenosides Rb1, Rb2, Rc, Rd, Rg3, and Rg5, we find Petitioner’s conclusion that heating a G. pentaphyllum extract that contains these ginsenosides would similarly increase the ginsenoside levels of Rg3 and Rg5 is a reasonable inference from the cited references. Based on the teachings in Kim 460, we agree with Petitioner that it would have been reasonable to expect that the same source material, although derived from a different plant, would behave similarly to heat treatment. See Pet. 24. Because G. pentaphyllum is a less expensive starting material, we also agree with Petitioner that there is sufficient motivation to substitute G. pentaphyllum for ginseng in the methods of Kim 460. slip op. at 29

    Patent outcomesUS 8,357,786 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 8,357,786
  • Apple Inc. v. Logantree, LPNo claims unpatentable
    PTAB · Aug 30, 2023 · IPR2022-00037 · APJ Patrick R Scanlon · IPR · Final written decision

    Claims 1–5, 8–11, 20, 25, 30–32, 36, 39–42, 45–51, 61–65, 144, and 147 were not shown unpatentable under the asserted obviousness grounds.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “In the Decision on Institution, we adopted Petitioner’s proposed level of ordinary skill in the art, stating it was “consistent with the evidence of record, including the asserted prior art.” Dec. Inst. 8. In proposing a different level of ordinary skill in the art, Patent Owner does not explain why its proposed skill level is more appropriate.12 PO Resp. 16. In addition, the parties’ proposed definitions are materially similar. 12 Petitioner does not address the level of ordinary skill in the art in its Reply. definition, although our conclusions with respect to obviousness would be the same if we were to apply Patent Owner’s definition.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “We determine that we need not expressly construe “movement sensor” to resolve the parties’ disputes because doing so would have no effect on the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs, 200 F.3d at 803 (Fed. Cir. 1999)). To the extent the parties raise claim construction issues in addressing the asserted grounds, we address such issues below.” slip op. at 12

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “Also, the Petition merely states that “Ono supports instances where the user stops the step-counting mode operation using switch S2 after the processor detects that” the target distance or the target number of steps has been reached and notifies the user by generating an alarm sound. Pet. 53 (emphasis added). In this case, supporting the notion of the user stopping the step-counting mode operation in response to the alarm is not the same as teaching or suggesting the notion to one of ordinary skill in the art. The possibility that a user could stop the step-counting operation in response the alarm is insufficient to render claims 1 and 20 obvious to one of ordinary skill in the art. See In re Facebook, Inc., 743 F. App’x. 998, 1001–02 (Fed Cir. 2018) (deciding that an example in a prior art reference showing that it is possible for image elements to be contiguous is not sufficient to teach a LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”). Petitioner’s reliance on the Hewlett-Packard and Unwired Planet cases (Pet. 56) is unavailing, as the facts in those cases are distinguishable from the facts of the present proceeding. Namely, both of those cases involved prior art references that disclosed operations that satisfied a claimed feature some, but not all, of the time. Hewlett-Packard, 340 F.3d at 1326; Unwired Planet, 841 F.3d at 1002. Here, Ono does not disclose the user stopping the step-counting mode operation in response to the alarm even some of the time. In view of the above, we determine, based on the full record, that the combination of Ono and Hutchings does not disclose limitations [1f] or [20f]. Accordingly, we are not persuaded that Petitioner has met its burden of showing, by a preponderance of the evidence, that independent claims 1 and 20 are unpatentable over the combination of Ono and Hutchings.” slip op. at 28

    • BurdenNot shown unpatentable

      “We have determined incorporated Grounds 1, 2, 3A, 3B, and 4, as well as Ground 5A, deficient for the reasons discussed above. Furthermore, to the extent Petitioner contends that any of these combinations somehow adds something to supplement or strengthen the patentability analysis of the incorporated grounds, we note that neither the Petition nor Dr. Kenny provides sufficient particularity to support such a position. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016) (“In an IPR, the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” (citing 35 U.S.C. § 312(a)(3)); see 1359, 1369 (Fed. Cir. 2016) (“It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” (quoting 35 U.S.C. § 312(a)(3))). Accordingly, we are not persuaded on the complete record before us that Petitioner has demonstrated, by a preponderance of the evidence, that: (1) claims 48, 50, and 51 are unpatentable over the combination of Ono, Hutchings, Amano, Conlan, Kaufman, and Hickman (Ground 5B); (2) claims 1–5, 8–11, 20, 25, 30, 31, 36, 39–42, 45–47, 49, and 61–65 are unpatentable over the combination of Ono, Hutchings, Amano, and Conlan (Ground 6A); (3) claims 48, 50, and 51 are unpatentable over the combination of Ono, Hutchings, Amano, Conlan, and Hickman (Ground 6B); (4) claims 1, 3–5, 8–11, 20, 25, 30, 36, 39–42, 61–65, 144, and 147 are unpatentable over the combination of Ono, Hutchings, Amano, and Kaufman (Ground 7); (5) claims 1–5, 8, 10, 20, 25, 30, 31, 39, 41, 42, 45–47, 49, 61–65, 144, and 147 are unpatentable over the combination of Ono, Hutchings, Conlan, and Kaufman (Ground 8A); and (6) claims 48, 50, and 51 are unpatentable over the combination of Ono, Hutchings, Conlan, Kaufman, and Hickman (Ground 8B).” slip op. at 36

    Patent outcomesUS 6,059,576 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 6,059,576
  • PTAB · Jan 26, 2023 · IPR2017-00858 · APJ Mitchell G Weatherly · IPR · Remand

    Claims 18, 19, 21, 26, and 29 were not shown unpatentable as obvious because Valve did not provide a reasoned basis to combine Burns with the design references.

    RulingsRemand decision
    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

      “testimony relating to the combinations of Burns with LaCelle or Knight, it falls short of providing a reasoned basis for modifying Burns. Dr. Rempel merely opines that incorporating the curved shapes of back controls from LaCelle or Knight into Burns would result in a back control that “could have better coupling with the user’s finger than the flat paddles that are otherwise disclosed by Burns.” Ex. 1019 ¶¶ 39–40 (emphasis added). In other words, modifying Burns in view of LaCelle or Knight might improve Burns. Dr. Rempel testified that the modification “could” improve Burns, not that it “would” improve Burns. The possibility of improvement, which also allows that Burns would not be improved, fails to rise to the level of “articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). Accordingly, we find such testimony to be insufficient to demonstrate that an ordinarily skilled artisan would have modified Burns in view of LaCelle or Knight. After considering the parties’ briefing, we conclude that Valve’s arguments and supporting evidence for combining teachings of Burns with each one of the Design References, excluding the untimely evidence submitted with Valve’s Supplemental Reply, are unpersuasive. Neither the Petition nor the evidence cited in the Petition cogently explains what advantage would be provided by the alternative control geometries of Burns and each of the Design References. A petitioner cannot demonstrate obviousness “by mere conclusory statements; instead, there must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006). “To facilitate review, this analysis should be made explicit.” KSR, 550 U.S. at 418 (citing Kahn, 441 F.3d at 988). Here, we find that Valve proffers conclusions without sufficient reasoning or objective evidence to demonstrate a reasonable likelihood of establishing that an ordinarily skilled artisan would have found it obvious to combine the elements from the prior art to arrive at the claimed controllers.” slip op. at 17

    • Expert testimonyPetitioner expert discountedOther

      “this simple and predictable art, and the results would not have been unexpected.” Id. (citing Ex. 1009 ¶¶ 21, 27, 32). Dr. Rempel cites no objective evidence to support this cited testimony, which largely parrots Valve’s brief. Compare id., with Ex. 1009 ¶¶ 21, 27, 32. Dr. Rempel’s testimony is entitled to less weight because it is not supported by underlying facts or data. See 37 CFR § 42.65(a).” slip op. at 15

    • ExcludeMotion to exclude, grantedGranted in part

      “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify “with particularity” the “evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3). “All arguments for the relief requested in a motion must be made in the motion. A reply may only respond to arguments raised in the corresponding opposition or patent owner response.” 37 C.F.R. § 42.23(b). Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016). We find that: (1) Valve proffered new testimony to fill the gaps that we identified in the Institution Decision and (2) presenting such testimony in the reply constitutes untimely new argument and evidence that must have been presented in the Petition.” slip op. at 16

    Patent outcomesUS 9,289,688 not shown unpatentable
    § 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,289,688
Page 1 of 4
← Previous1234Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.