• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting et al. v. Cao Lighting, Inc.Some claims unpatentable
  PTAB · Sep 28, 2023 · IPR2022-00847 · APJ Brian D Range · IPR · Final written decision

  Claims 21, 22, 25, 26, 28–30, 32–36, 40, 42–44, 47–49, 52, 53, 56–59, 62, 63, 65–68, 71–73, 77, 78, 81, 82, 85, 86, and 88–91 are unpatentable over Begemann, Krames, and Allen; claim 41 is …

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “Patent Owner’s argument is unpersuasive because the Krames declaration addresses the Patent Owner Response and is relevant to the issues at hand. We start with an important observation: claim 21 (the only independent claim at issue) is an apparatus claim; the claim is directed to a “semiconductor light source.” Ex. 1001, 9:52. One requirement of this apparatus is that it comprise “at least one semiconductor chip” (id. at 10:1) where the “at least one semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts.” Id. at EPRC, 1:34–36. As we explain when addressing claim construction, infra, we adopt Patent Owner’s proposed construction of “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as meaning “at least one LED chip is capable of emitting light greater than about 40 milliwatts.” See Section III.D, infra (emphasis added). Because of these recitations, Petitioner bears the burden of establishing that the prior art teaches or suggests a semiconductor chip “capable of emitting light greater than about 40 milliwatts.” As explained herein, we determine that in the Petition, Petitioner met this burden by establishing by a preponderance of the evidence that the Krames reference teaches an LED chip that has this capability. Pet. 54 (quoting Ex. 1008, 10). Notably, claim 21 does not require actual operation of anything at greater than 40 milliwatts because claim 21 is not a method claim. Petitioner never had a burden of establishing a method of running the Krames reference’s LED at this power output within a semiconductor light source.” slip op. at 12

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’961 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 19. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in the art would need to be “familiar with thermal issues.” Ex. 2015, 26:15– 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’961 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 19

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “particularly relevant.” Resp. 14–15. First, Patent Owner argues that “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” means “at least one LED chip is capable of emitting light greater 9 Petitioner states that “Patent Owner thus contends the recited ‘reflective layers’ can include transparent or semi-transparent layers that exhibit some reflectivity (e.g., SiO2) or an interface between two layers (e.g., the buffer and substrate layers) that exhibit differing indices of refraction.” Pet. 20. Patent Owner frames this as being Petitioner’s “novel construction” (Resp. 16), but Petitioner does not expressly endorse this Patent Owner contention. than about 40 milliwatts.” Resp. 14–15. Patent Owner notes that a district court already adopted this construction and notes that the “LED chip” includes LEDs, LED modules, and LED arrays but excludes laser chips, laser modules, and VCSEL chips. Id. (citing Ex. 2003, 15–18). Petitioner argues that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1–2. We adopt Patent Owner’s proposed construction because it is well supported by the record including the District Court’s reasoning. Ex. 2003, 15–18. slip op. at 20

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “It is unnecessary to construe any other claim terms in this Decision because none of the parties’ disputes turn on the meaning of other claim terms. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017).” slip op. at 22

  Patent outcomesUS 6,465,961 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 6,465,961
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.Some claims unpatentable
  PTAB · May 5, 2023 · IPR2022-00098 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 3, and 4 are unpatentable as obvious over the stated combinations; claim 2 was not shown unpatentable because the driver was not shown configured to receive the rectifier’s forward voltages.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that a person of ordinary skill in the art would have had experience in LED devices. For this reason, we apply Patent Owner’s proposed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record. However, if we were to apply Petitioner’s proposed level of skill, our Decision would not be affected.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Upon review of the entire record, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “Dr. Ducharme’s testimony that “the spacing of the chips in Zhang would not likely be so close as to create overheating issues” (Ex. 2002 ¶ 111) is unsupported by any disclosure of the actual spacing of Zhang’s chips. Consequently, his testimony that there would be no overheating concerns in Zhang due to the spacing of the chips is entitled to little, if any, weight. Dr. Ducharme further testifies that the components of Zhang’s driver “could easily increase the temperature of the LED 19 chips on the circuit board, which can cause LEDs to generate less illumination, burn out and otherwise adversely affect their performance.” Ex. 2002 ¶ 126. Dr. Ducharme further testifies that “[i]t is well-known that excessive operational temperatures can reduce the illumination provided by the LEDs, can decrease the operational lifetime of the LEDs, and if the temperature is sufficiently high, it can cause LED junction failure and a burnt-out LED.” Id. We agree with this testimony, which as discussed below, is consistent with Salam. Dr. Ducharme’s testimony concerning overheating issues caused by the driver components contradicts Patent Owner’s ’s contention that there would not be “an overheating issue with Zhang’s LED exit sign circuit in Figure 2.1.” PO Resp. 30. Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106). Patent Owner next contends it would be extremely burdensome and costly to modify Zhang to add a heat sink layer because “each of the multiple chips mounted and epoxied to Zhang’s circuit board in the exit sign would have to be modified.” PO Resp. 30 (citing Ex. 2002 ¶ 112). Dr. Ducharme’s testimony repeats the Patent Owner Response verbatim and is entitled to little, if any, weight. Ex. 2002 ¶ 112. Nonetheless, this contention is unavailing because it is based on Patent Owner’s bodily incorporation of Zhang and Salam. Patent Owner next contends that a person of ordinary skill in the art” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106).” slip op. at 27

  Patent outcomesUS 10,517,149 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,517,149
• Home Depot USA, Inc. v. Lynk Labs, Inc.Some claims unpatentable
  PTAB · May 5, 2023 · IPR2022-00023 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1 and 4 are unpatentable over the stated § 103 combinations; Petitioner did not show claim 2 unpatentable because it did not explain how the LED array’s forward voltage is received by the driver.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “degree in electrical engineering, or similar technical field, with two years of experience in the field of design and/or development of light-emitting diodes (LEDs) and circuits in the context of lighting control systems.” Pet. 11–12 (citing Ex. 1002 ¶ 34). Petitioner further contends that “[a]n increase in experience could compensate for less education.” Id. at 12. Patent Owner proposes the same level of skill in the art. See PO Resp. 6. We apply the parties’ undisputed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record.” slip op. at 8

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We credit Dr. Lebby’s testimony over Dr. Ducharme for the following reasons. First, in Deese, power cable 28 is inserted into an opening in rubber housing 21. Ex. 1008, Fig. 2A. [R]ubber housing 21 forms a water-tight seal around the power cable 28.” Id. at 4:63–65. Dr. Ducharme does not explain why Hochstein’s protruding heat sink shell could not similarly be inserted through rubber housing 21 with a water-tight seal. Further, Dr. Lebby relies on the similarity between the structures of Deese and Hochstein. Hochstein uses gasket 45 and weather seal 48 to seal housing 10 with electrical lead 49 and heat sink shell 38 extending therethrough. Ex. 1010, 5: 39–40, 5:63:65, Fig. 8.” slip op. at 47

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionOther

    “Our analysis starts with the claim language. Claim 1 recites “a driver, wherein the driver includes at least one transistor and at least one capacitor” and “the driver is configured to receive an AC voltage from a mains power source and provide a voltage and current to the at least one LED circuit.” Ex. 1001, 23:16–17, 26:22–24. Dr. Ducharme testifies that power is determined by multiplying voltage and current. Ex. 2008 ¶ 63. The language of claim 1, thus, supports Patent Owner’s construction which is also consistent with the dictionary definition offered by Petitioner which also defines “driver” as [a] program, circuit or device used to power or control other programs, circuits or devices.” Ex. 1007, 4 (emphasis added). The Specification provides “the driver providing an AC voltage and current to one or more LED circuits.” Ex. 1001, 3:65–67. Thus, the Specification also provides support for Patent Owner’s construction. For the foregoing reasons, we apply Patent Owner’s proposed construction of “driver” because it is consistent with the language of claim 1 and the description of driver in the Specification. We note that the adjective “LED” prior to circuits or devices in Patent Owner’s construction is not necessary because that it essentially repeats limitation 1.e.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITADecided for petitioner

    “We begin with the claim language itself which is “the package is a heat sinking reflective material.” Ex. 1001, 23:18–19 (emphasis added). In its analysis, Patent Owner parses “heat sinking reflective material” out of context by omitting the italicized language “the package is” preceding “heat sinking reflective material.” PO Resp. 29. The deposition testimony of Dr. Lebby and Dr. Ducharme’s declaration testimony cited by Patent Owner are also out of context. The Specification of the ’149 patent defines “package” as an integrated unit that “in certain applications may preferably include a heat sink, a reflective material, a lens for directing light, phosphor nano-crystals or light changing or enhancing substances.” Ex. 1001, 5:30–33. Because heat sink and reflective material are listed separately in the Specification, this disclosure suggests that, at least in certain embodiments, a package with a heat sink separate from a reflective material would fall within the scope of limitation 1.c. This is further confirmed by comparing the packages illustrated in Figures 25 and 26 of the ’149 patent which are reproduced above. Figure 25 is described as illustrating “heat sinking material 198 . . . integrated into the package 30.” Id. at 17:34–35. Figure 26 is described as illustrating reflector 202 “integrated into the package 30 for optimized light dispersion.” Id. at 17:47–49. As can be seen from a visual comparison of Figures 25 and 26, reflector 202 is separate from heat sinking material 198. Given the disclosure in the ’149 patent of a package with a heat sink” slip op. at 15

  Patent outcomesUS 10,517,149 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,517,149
• Nanya Technology Corporation / Nanya Technology Corporation, U.S.A. et al. v. Monterey Research, LLCSome claims unpatentable
  PTAB · Jun 2, 2022 · IPR2021-00170 · APJ Brian D Range · IPR · Final written decision

  Claim 1 is unpatentable as obvious over McClure in view of Merritt, Issa, or Kawasumi; Petitioner did not prove claims 2 and 3 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A. Person of Ordinary Skill in the Art Petitioner argues that a person of ordinary skill in the art would have been a technical person having “a Bachelor’s degree in electrical engineering, computer engineering, applied physics, or a related field, and approximately two years of experience working in the design, development, and/or testing of memory circuits, related hardware design, or the equivalent, with additional education substituting for experience and vice versa.” Pet. 11. For purposes of this inter partes review, Patent Owner adopts Petitioner’s definition. Resp. 13. Based on the totality of the record including the ’429 patent specification, cited references, and expert testimony, we find that Petitioner’s definition for a person of skill in the art is appropriate.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “amplifiers “by the strobe reset generator instead [of] by the strobe global word line (gwlstrobe) 52”). The Figure 1 apparatus, at the location of the purple oval, merely conveys a strobe signal (gwlstrbuf 20) on a line without substantially changing that signal. Id. Fig. 1. The Figure 2 apparatus, however, illustrates main amp strobe 60 generating output signal 88 by delaying the gwlstrbuf signal output by buffer 58. Id. at 4:6–9, Fig. 2. Given the context of the ’429 patent specification, we decline to construe “main amplifier strobe” in a manner that would fail to distinguish Figure 2’s main amplifier strobe from Figure 1’s unlabeled strobe-carrying line (identified with a purple oval above). See id. (identifying main amp strobe 60 as a “main amplifier strobe circuit 60”). If Figure 2’s identification of a “main amplifier strobe 60” is to be distinguishable from Figure 1’s lack of any identified main amplifier strobe 60, the main amplifier strobe has to be more than just a mere strobe signal or line that carries a strobe signal. The ’429 patent specification explains that “first main amplifier strobe circuit 60 delays the rising edge of the output of the buffer 58” to “ensure[] that the local amplifiers 82, 84, 86 stay on until the main amplifier 108 is on.” Id. at 4:6–9. While we decline to import this exact functionality from the specification into claim 1’s “main amplifier strobe,” based on the discussion above, the main amplifier strobe must affect the transmitted signal and it must affect the signal consistent with the word “strobe.” See Phillips, 415 F.3d at 1323 (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 13

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “Petitioner argues that a person having ordinary skill in the art would have modified McClure’s memory core “such that each sense amplifier 602 is coupled to a pair of global read data lines as taught by Winograd, Merritt, Issa, and Kawasumi.” Pet. 66. The preponderance of the evidence supports this position at least as to Merritt, Issa, and Kawasumi. Petitioner’s declarant, Dr. Chmelar, states that a person of skill in the art would have modified McClure to “reduce power consumption, circuit areas, and/or readaccess time because the plurality of global data bus drivers 606 . . . could be eliminated.” Ex. 1003 ¶ 215. Dr. Chmelar’s testimony on this point is credible and well-supported by the evidence. As explained above, Merritt, Issa, and Kawasumi all teach local amplifiers coupled to global read data lines, and a person of skill in the art would have recognized the advantages of the global read data line configuration by studying those references. Petitioner’s position is further supported by the ’429 patent which admits that a structure of local amplifiers connected to global read data lines was known prior art. In particular, Figure 1 of the ’429 patent illustrates “conventional solution” prior art having local amplifiers 22, 24, and 26 connected to global read data lines 38 and 40. Ex. 1001, Fig. 1, 1:26–48 (“The local amplifiers 22, 24, 26 then drive the gdrd (global read data) lines 38, 40.”); see also Pet 8–9 (mapping claim elements to Figure 1). Patent Owner argues that Petitioner does not establish reason to combine the references’ teachings. Resp. 60–62. We disagree for the reasons explained above. The record as a whole, even if the ’429 patent’s disclosure were not considered, supports by a preponderance of the evidence that connecting local amplifiers to global read data lines was a well-known configuration. See supra 27–32. Connecting McClure’s local amplifiers to global read data lines is no more than use of a known method to yield predictable results. KSR Int'l Co. v. Teleflex Inc., 550 U.S. 398, 401 (2007). Patent Owner also argues that Kawasumi criticizes its Figure 1 prior art “for its arrangement of having multiple amplifiers connected to global data lines.” Resp. 61–63; see also Ex. 2001 ¶ 176 (Patent Owner’s declarant Dr. Hassoum stating that Kawasumi says the Figure 1 arrangement is problematic). Patent Owner does not, however, persuasively dispute that use of main amplifiers with global read data lines was a known configuration or that implementation of such a configuration would have been within the abilities of a person of ordinary skill in the art. Reply 28–29. Instead, Kawasumi, for example, teaches that its arrangement of local sense amplifiers 1 providing data to the data bus 2 is a workable configuration. Ex. 1010, 1:49–63. Although Kawasumi teaches that this configuration may” slip op. at 32

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Petitioner argues that a person having ordinary skill in the art would have modified McClure’s memory core “such that each sense amplifier 602 is coupled to a pair of global read data lines as taught by Winograd, Merritt, Issa, and Kawasumi.” Pet. 66. The preponderance of the evidence supports this position at least as to Merritt, Issa, and Kawasumi. Petitioner’s declarant, Dr. Chmelar, states that a person of skill in the art would have modified McClure to “reduce power consumption, circuit areas, and/or readaccess time because the plurality of global data bus drivers 606 . . . could be eliminated.” Ex. 1003 ¶ 215. Dr. Chmelar’s testimony on this point is credible and well-supported by the evidence. As explained above, Merritt, Issa, and Kawasumi all teach local amplifiers coupled to global read data lines, and a person of skill in the art would have recognized the advantages of the global read data line configuration by studying those references. Petitioner’s position is further supported by the ’429 patent which admits that a structure of local amplifiers connected to global read data lines was known prior art. In particular, Figure 1 of the ’429 patent illustrates “conventional solution” prior art having local amplifiers 22, 24, and 26 connected to global read data lines 38 and 40. Ex. 1001, Fig. 1, 1:26–48 (“The local amplifiers 22, 24, 26 then drive the gdrd (global read data) lines 38, 40.”); see also Pet 8–9 (mapping claim elements to Figure 1). Patent Owner argues that Petitioner does not establish reason to combine the references’ teachings. Resp. 60–62. We disagree for the reasons explained above. The record as a whole, even if the ’429 patent’s disclosure were not considered, supports by a preponderance of the evidence that connecting local amplifiers to global read data lines was a well-known configuration. See supra 27–32. Connecting McClure’s local amplifiers to global read data lines is no more than use of a known method to yield predictable results. KSR Int'l Co. v. Teleflex Inc., 550 U.S. 398, 401 (2007).” slip op. at 32

  Patent outcomesUS 7,158,429 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 7,158,429
• Renesas Electronics Corporation / Renesas Electronics America, Inc. v. Lone Star Silicon Innovations, LLCSome claims unpatentable
  PTAB · Mar 25, 2019 · IPR2017-01869 · APJ Elizabeth M Roesel · IPR · Final written decision

  Claims 1, 4–6, 9, and 10 are unpatentable as obvious over Igarashi and Tanaka (1999); claims 2 and 7 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “For purposes of our Institution Decision, we accepted the definition of a POSA provided by Dr. Bottoms. Dec. 10–11 (citing Ex. 2001 ¶ 31). Dr. Bottoms provides a “clarification” of the Board’s description, testifying that “[t]he specific industry experience would require process design experience—which is experience beyond managing fabrication equipment.” Ex. 2011 ¶ 36. Dr. Bottoms’ clarification is consistent with the level of skill reflected by the ’330 patent, which discloses process design options for making a low dielectric constant silicon nitride etch stop. Ex. 1001, 5:66-6:24. Dr. Neikirk testifies that, under Dr. Bottoms’ definition, a POSA has a higher degree of skill than under Dr. Neikirk’s definition, and the Board’s adoption of Dr. Bottoms’ definition would not change his opinions regarding obviousness. Ex. 1028 ¶ 14. We find there is little difference between the declarants’ definitions of a POSA, and the outcome of our patentability determinations would be the same, regardless of which definition we accept. For the sake of clarity, we adopt Dr. Bottoms’ definition of a POSA, including the recent clarification. Ex. 2011 ¶¶ 35, 36. We also rely on the cited prior art references as reflecting the level of ordinary skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedOther

    “After reviewing the qualifications of Dr. Neikirk and Dr. Bottoms, as set forth in each witness’s declaration and curriculum vitae, we find that each of these declarants has sufficient education and experience related to the subject matter of the ’330 patent to testify regarding the perspective of a POSA at the time of the invention. Ex. 1011 ¶¶ 2, 3; Ex. 1012; Ex. 2002; Ex. 2011 ¶¶ 8–20. See Trial Practice Guide Update, 83 Fed. Reg. 39,989 (Aug. 13, 2018), available at https://go.usa.gov/xU7GP (“TPG Update”), 3 (“A person may not need to be a person of ordinary skill in the art in order to testify as an expert under Rule 702, but rather must be ‘qualified in the pertinent art.’” (quoting Sundance, Inc. v. DeMonte Fabricating Ltd., 550 F.3d 1356, 1363–64 (Fed. Cir. 2008))). D.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “In the Institution Decision, we determined that it was not necessary to resolve the parties’ claim construction dispute. Dec. 9–10. Neither party challenges that determination. Petitioner contends that the asserted grounds of unpatentability apply under either party’s construction for the phrase “etch stop layer of silicon nitride.” Pet. 25 n.3. Patent Owner argues that this phrase is not limited to a layer of pure silicon nitride and allows for the presence of dopants and/or impurities. PO Resp. 8–10. Patent Owner does not, however, rely on its proposed claim construction for any patentability argument. In fact, Patent Owner acknowledges that the silicon nitride materials disclosed in the Low-K References satisfy Patent Owner’s proposed construction. PO Resp. 10. Under these circumstances, we agree with Petitioner that we do not need to resolve the parties’ claim construction dispute. Pet. Reply 2. Accordingly, consistent with the Institution Decision, we determine that we do not need to provide an express construction for any claim term for purposes of resolving the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). B.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “copper interconnects need silicon nitride films as an etch stop, but that such films have a high dielectric constant, which causes an undesirable increase in the effective dielectric constant of the interconnect structure and increased parasitic capacitance, as compared with aluminum interconnects. Ex. 1021, 829-1, 829-2; see Pet. 18; Ex. 1011 ¶¶ 92, 93. As Petitioner correctly points out (Pet. 53–54), Tanaka (1999) cites Igarashi as an example of a copper interconnect system that is degraded by parasitic capacitance due to the high permittivity (dielectric constant) of silicon nitride etch stop films. Ex. 1017, 47-1 n.1. Tanaka (1999) discloses a low dielectric constant silicon nitride etch stop film as a solution to the problem of parasitic capacitance in copper damascene interconnect structures, such as Igarashi’s. Id. at 47-1, 47-2 (“New low-k SiN film, with a permittivity of 5.4 . . . should be the solution to realize Cu damascene interconnects . . . .”). Consistent with these express disclosures, Dr. Neikirk persuasively testifies that “Igarashi identifies a need for a low-k dielectric etch stop layer” and “Tanaka (1999) meets this need.” Ex. 1011 ¶ 94; see Pet. 18 (citing Ex. 1011, § VIII.C., which contains paragraph 94 of Dr. Neikirk’s testimony). Accordingly, we find Petitioner has shown by a preponderance of the evidence that a POSA would have been motivated to use the low dielectric constant silicon nitride etch stop film of Tanaka (1999) as the etch stop layer in the interconnect system of Igarashi. Patent Owner disputes whether Petitioner has established a reasonable expectation of success for the combination of Tanaka (1999)’s low dielectric constant silicon nitride etch stop film and Igarashi’s interconnect structure. PO Resp. 65. Although the Petition does not expressly discuss whether one of ordinary skill in the art would have had a reasonable expectation of success in combining Tanaka and Igarashi to arrive at the claimed invention, Petitioner shows a very close relationship between the teachings of Tanaka (1999) and Igarashi. Pet. 12–13, 17–18, 53–62. As discussed above and argued by Petitioner, Tanaka (1999): (1) cites Igarashi as an example of a copper interconnect system that suffers from parasitic capacitance due to the high dielectric constant of silicon nitride etch stop films, and (2) discloses a low dielectric constant silicon nitride etch stop film as a solution to the parasitic capacitance problem exemplified by Igarashi. Pet. 13, 18, 53–54; Ex. 1011 ¶¶ 74–79, 88–94; Ex. 1017, 47-1 & n.1; Ex. 1021, 829-1, 829-2. Petitioner establishes a reasonable expectation of success for the combination of Tanaka (1999) and Igarashi by demonstrating a strong correlation between the problem discussed by Igarashi—the high dielectric constant of silicon nitride films when used as etch stops for copper interconnects—and the solution disclosed by Tanaka (1999)—a low dielectric constant silicon nitride film for use as an etch stop layer in copper damascene interconnect structures. In re Inland Steel Co., 265 F.3d 1354, 1364 (Fed. Cir. 2001) (“[T]he strength of the correlation between the references gives rise to a reasonable expectation of success from combining them.”).” slip op. at 27

  Patent outcomesUS 6,388,330 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 6,388,330
• Fujifilm Corporation v. Sony CorporationSome claims unpatentable
  PTAB · Nov 7, 2018 · IPR2017-01268 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 15 and 17 are unpatentable as anticipated by Ishikawa; the petitioner did not show claims 1–11, 16, and 18–20 unpatentable over Aonuma or Aonuma and Abe.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) at the time of the ’774 patent would have had “a bachelor’s degree in materials science, electrical engineering, mechanical engineering, chemistry, or a closely related field, and at least five years of experience” in industry or academic research relating to magnetic tape, or “a master’s degree or higher” in the same fields and at least three years of experience relating to magnetic tape. Pet. 13 (citing Ex. 1003 ¶ 65; Ex. 1018 ¶ 60). Patent Owner does not dispute Petitioner’s assessment in its Response, and Dr. Talke agrees that it “is reasonable.” Ex. 2026 ¶¶ 25–26. Petitioner’s assessment appears consistent with the level of ordinary skill in the art at the time of the invention as reflected in the prior art in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Accordingly, we adopt Petitioner’s assessment of the level of ordinary skill in the art.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “the broadest reasonable construction, claim terms are presumed to have their ordinary and customary meaning as understood by a person of ordinary skill in the art in the context of the entire patent disclosure. In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For the purposes of the Decision on Institution, we determined that, based on the record at that time, no claim term required express construction (Dec. on Inst. 7), and we see no reason to modify that determination in light of the record developed during trial. C.” slip op. at 9

  • Expert testimonyPetitioner expert creditedMixed

    “considerably greater than Ishikawa’s stylus load of 50–300 μN (Ex. 1015 ¶ 45). The Talke Declaration does not address this discrepancy, and Dr. Talke stated during his deposition that reducing the stylus load would reduce scratching of the magnetic tape surface. Ex. 1030, 108:14–19 (“Q: Would reducing the contact pressure for the stylus instrument reduce the scratching of the magnetic tape surface by the stylus? A: Yes, it would, but you have to remember the other problem is the diameter and size of the stylus.”). Moreover, Petitioner provides evidence that it was not uncommon to use stylus-type profilometers to measure the properties of magnetic tape, even after Bhushan was published in 1996. See Reply 6. In particular, Petitioner points to Saliba,6 which describes using a stylus-type profilometer, under identical conditions to those used in Ishikawa, to measure the surface characteristics (including peak-to-valley roughness) of the backcoating of magnetic tape. Ex. 1027, 7:28–40, 57–60. Petitioner further points to Ohno,7 which also describes using “a stylus type 3D profilometer in accordance with JIS B0601” to measure the surface roughness characteristics of magnetic tape. Ex. 1028 ¶ 36; see also Ex. 1015 ¶ 45 (Ishikawa explaining that surface roughness characteristics were measured “in accordance with JIS-B0601-1994”); Ex. 1027, 7:28–39 (Saliba explaining that surface roughness characteristics where measured “in accordance with JIS-B0601-1994”). Accordingly, we are persuaded that the 6 US Patent No. 6,558,774 B1, issued May 6, 2003 (Ex. 1027). 7 U.S. Patent App. Pub. No. US 2005/0175866 A1, published Aug. 11, 2005 (Ex. 1028). evidence establishes that a stylus-type profilometer is a suitable device for measuring the surface characteristics of magnetic tape.” slip op. at 19

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We agree with Petitioner that Ishikawa teaches “peak-to-valley roughness less than about 325 nm” as recited in claim 15. Pet. 24–25; Reply 5–8; Ex. 1003 ¶ 216. In particular, Ishikawa teaches a backcoating layer of a magnetic tape that has a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm.” Ex. 1015 ¶ 44. Ishikawa provides five example embodiments of its magnetic tape, and reports the measurements of a number of characteristics of the backcoat layer for each example, including peak-to-valley roughness Rz. Id. ¶¶ 120–134, Table 1. Ishikawa discloses that peak-to-valley roughness Rz was measured using a stylus-type profilometer under the following conditions: Stylus: diameter: 1.5 to 2.5 μm; curvature: 60º Contact pressure: 50 to 300 μN Cut-off length: 80 μm Sampling length: 80 μm Assessment length: 400 μm Id. ¶¶ 45, 49. The reported peak-to-valley roughness Rz values for the five examples ranged from 58 to 87 nm, as shown in the annotated portion of Ishikawa Table 1 from the Petition, reproduced below: Pet. 24 (citing Ex. 1015, Table 1). The annotated portion of Ishikawa Table 1 shows the results for the measured characteristics of the backcoat layer of Examples 1–5, with the peak-to-valley roughness Rz values highlighted by a red box. Id. Because Ishikawa teaches that the backcoating layer of its magnetic tape should have a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm,” and because Ishikawa presents examples of magnetic tape with backside surfaces having a peak-to-valley roughness of 87 nm or less, Ishikawa discloses “a peak-to-valley roughness less than about 325 nm” as recited in claim 15.” slip op. at 16

  Patent outcomesUS 7,029,774 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,029,774

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.