- Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - PTAB · Jan 14, 2026 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Remand
On remand, the Board reinstituted review of all challenged claims on all grounds after finding Petitioner sufficiently explained its differing claim-construction positions.
RulingsRemand decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Id. The Director neither addressed the merits of Petitioner’s challenges nor found that our prior consideration of those merits was faulty. Accordingly, we understand that we need not reconsider our conclusion that Petitioner had demonstrated a reasonable likelihood of proving that claims 1, 2, 7–9, 11, 12, and 20–24 were unpatentable or that the merits of patentability set forth in the Petition warranted institution of inter partes review.” slip op. at 5
- BurdenDecided for petitioner
“The question before us, therefore, is whether the Petitioner’s proffered explanation that it has proposed a different claim interpretation before the Board because the District Court may decline to adopt the narrower claim interpretations it advocates there is sufficient. We find that Petitioner’s explanation is sufficient because it follows the Director’s exemplary logic. Whether a district court has already or might in the future decline to adopt constructions that a petitioner proposes in related district court litigation merely reflects the timing of when a dispute over claim interpretation will be resolved. The Director and Patent Owner both recognize that, to resolve the dispute over claim interpretation that exists here, a decision-maker must determine “a single claim construction that best captures the true meaning of the patent claim.” Remand 4; PO Remand Br. 3. Based on the record presented by the parties to date in this proceeding, no dispute exists that the disputed claim terms mean what Patent Owner says they mean in the Litigation. Accordingly, we find that, at this stage of the proceeding, it is undisputed that Patent Owner’s interpretations of the claim terms represent the “single claim construction that best captures the true meaning of the patent claim.”8 Under that claim interpretation, we” slip op. at 8
NonePatents in suitUS 11,835,421 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision
Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20
Patent outcomesUS 10,015,413 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,015,413 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.
RulingsFinal written decision- BurdenFwd all claims patentableNot shown unpatentable
“4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18
- Skill levelSkill level petitioner adoptedOther
“A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentablePTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand
Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.
RulingsRemand decision- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable
“We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20
- Expert testimonyPetitioner expert discountedPatent owner expert creditedOther
“witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38
Patent outcomesUS 10,647,861 not shown unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 10,647,861 - PTAB · Oct 9, 2025 · IPR2025-00847 · APJ Brian D Range · IPR · Institution
Instituted IPR on claims 1–11 because Petitioners showed a reasonable likelihood of proving at least one challenged claim unpatentable across the asserted grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The following findings of fact and conclusions of law are not final, but are made for the sole purpose of determining whether Petitioners meet the threshold for initiating review. Any final decision shall be based on the full trial record, including any response timely filed by Patent Owner. Any arguments not raised by Patent Owner in a timely-filed response may be deemed waived. For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We hereby institute an inter partes review as to claims 1–11 of the ’847 patent based upon Petitioners’ asserted grounds of unpatentability.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“would have had a master’s degree in electrical engineering, physics, chemistry, materials science, or a related field and three years of work experience in semiconductor manufacturing, such as, for example, in integrated circuit device (or transistor) design and/or manufacturing,” and “[a]dditional relevant education could substitute for professional experience, and significant work experience or training could substitute for formal education.” Pet. 11 (citing Ex. 1003 ¶ 38). Patent Owner does not dispute the level of ordinary skill in the art. See generally Prelim. Resp. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’847 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner does not propose any claim constructions, except to explain that the claim 7 limitation “the spacer further comprises an offset spacer, positioned between the gate and the spacer,” is “satisfied if one layer (an ‘offset spacer’) of the claimed ‘spacer’ lies between another layer of the ‘spacer’ and the gate.” Pet. 11. Patent Owner does not dispute Petitioner’s assertions or offer any claim constructions. See generally Prelim. Resp. Because resolution of Petitioner’s proposed construction is unnecessary to our analyses for purposes of this decision, we do not address the proposal here. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We do not discern a need to construe any other claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC, 912 F.3d at 1375.” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Instituted
“a. Claim 1 Petitioner contends that claim 1 is anticipated by Lan or, alternatively, obvious in view of Lan. Pet. 18–26. Petitioner explains how Lan teaches or suggests each recitation of claim 1, and Petitioner’s position is supported by adequate evidence for institution. Id. (citing, e.g., Ex. 1003 ¶¶ 100–125). Petitioner, for example, persuasively compares the structure of Figure 12 of Lan to each limitation of claim 1. Id. Patent Owner does not dispute Petitioner’s contentions except to argue that Lan (and the Petition’s other asserted references) “Do Not Mention, Describe, or Concern ‘Raised Epitaxial Layers.’” Prelim. Resp. 22–24. Patent Owner does not persuasively undermine Petitioner’s position.” slip op. at 13
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,745,847 - PTAB · Oct 6, 2025 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Institution
The Board instituted IPR of claims 1–10, 12, 13, 19, and 20 on all petition grounds after finding a reasonable likelihood that claim 1 was obvious over Douglas and Mark.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“A claim is unpatentable under § 103 “if the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious before the effective filing date of the claimed invention to a person having ordinary skill in the art to which the claimed invention pertains.” 35 U.S.C. § 103; see KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). When a ground in a petition is based on a combination of references, we consider “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)).” slip op. at 8
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3 (citing Ex. 1003 ¶¶ 19–21); Prelim. Resp. 9. The parties’ proposed levels of ordinary skill are substantially similar. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposal for this decision. Only Petitioner’s proposed level is supported by testimonial evidence on the preliminary record, and it appears to be consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Therefore, we adopt Petitioner’s proposal for this decision.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“CLAIM CONSTRUCTION B. In an IPR, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. 282(b).” 37 C.F.R. § 42.100(b). This generally includes “construing the claim in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” Id. The ordinary and customary meaning of a claim term “is its meaning to the ordinary artisan after reading the entire patent,” and “as of the effective filing date of the patent application.” Phillips, 415 F.3d at 1313, 1321. Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; Prelim. Resp. 9. However, the parties’ positions depend on interpreting the claim language in a particular way, and we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“At this stage, we find Petitioner’s arguments persuasive and disagree with Patent Owner. Patent Owner appears to equate a “fabrication profile” with a toolpath description, but nothing in the plain language of claim 1 supports that narrow interpretation. The ’774 patent describes a “fabrication profile” broadly and states that the profile can simply “include the dictionary [of configuration information],” or be “used to determine which machineready representation is available or suitable for a target printer.” Ex. 1001, 23:49–52. The preliminary evidence suggests that Douglas’s “operational parameters” would count as a “fabrication profile” because it is “the basis for generation of a machine-ready representation of the three-dimensional model that is executable on the target printer.” Id. at 23:37–39; see infra Section III.C.8. We also disagree that Petitioner’s argument is impermissible hindsight, because it is based on the disclosures in Douglas and Mark, and Petitioner has articulated a sufficiently persuasive reason to combine those references without referring to the ’774 patent itself. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”). Finally, Petitioner appears to rely on Mark for providing a particular example of a fabrication profile, not to replace Douglas’s overall system in which the 3D printer can receive “operational parameters” rather than just G-code. See Pet. 8–10, 17–23; see also Ex. 1005 ¶ 41 (the print queue, which stores tool instructions, may be maintained locally on printers 204 or on print servers 208); see In re Mouttet, 686 F.3d 1322, 1332 (Fed. Cir. 2012) (“[A] determination of obviousness based on teachings from multiple references does not require an actual, physical substitution of elements.” (citing In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc))).” slip op. at 19
Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - PTAB · Oct 3, 2025 · IPR2025-00680 · APJ Karl D Easthom · IPR · Institution
The Board instituted IPR of claims 2 and 3 on all grounds in the Petition and granted Nintendo’s motion to join IPR2024-00807, subject to participation limits.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“II. ANALYSIS A. Institution of Inter Partes Review We instituted an inter partes review in the Apple IPR on all challenged claims and all asserted grounds of unpatentability. Apple IPR, Paper 10 (institution decision); see also Apple IPR, Paper 2 (the “Apple Petition”). Petitioner here challenges the same claims and asserts the same grounds of unpatentability as those on which we instituted the Apple IPR. Compare Pet. 2, with Apple Petition 1; see also Mot. 1 (asserting the instant “Petition is substantively identical to Apple Inc.’s petition (‘Apple Petition’) in the Apple IPR, including that it relies on the same expert declaration,” and asserting “the same grounds presented in the Apple IPR”). As indicated, Petitioner also relies on the same declarant as did the petition in the Apple IPR. Mot. 1; compare Ex. 1003 (Hannaford Declaration), with Apple IPR, Ex. 1003 (same). Because the grounds of unpatentability in the instant Petition are identical to those in the Apple IPR and for the same reasons stated in our Decision to Institute in the Apple IPR, we institute inter partes review in this proceeding on the grounds presented in the Petition. See Apple IPR, Paper 10 (analyzing challenges in the Apple Petition).” slip op. at 7
- PTAB / AIA Trials › Joinder §315(c) / SAS all-or-nothingJoinder, grantedGranted
“We determine that Petitioner has met its burden of showing that joinder is appropriate because, as set forth above, the Petition (1) is substantially identical to the Apple Petition, (2) contains the same grounds based on the same evidence, and (3) relies on the same declaration, the Hannaford Declaration (Ex. 1003). Mot. 1, 4. Petitioner represents that “joinder will not negatively impact the Apple IPR trial schedule” and “expressly consents to the existing trial schedule.” Id. at 10; see also id. at 7 (“Proceeding with a consolidated inter partes review would avoid potential inconsistency, promote efficient review of the same claims for the same patent under the same grounds, and would result in a final written decision without delay.”). Petitioner also represents that as “long as Apple remains in the joined IPR, Nintendo remains in a limited ‘silent understudy’ role that does not actively participate in the IPR.” Id. at 8. The record supports Petitioner. In addition, the final written decision in the Apple IPR is due to issue on or before October 15, 2025, with the Oral Hearing complete and no further briefing due. See IPR 2024-00807, Paper 15 (Oral Hearing Transcript); Paper 18, 2–3. Therefore, as Petitioner argues, joinder by Petitioner will have little or no impact on the trial schedule in the Apple IPR. On the other hand, if the Board denies joinder, Petitioner submits that it “intends to file a separate petition for IPR (‘Second Petition’) that includes grounds in addition to some (or all) of the grounds in the Apple IPR.” Mot. 14.” slip op. at 10
NonePatents in suitUS 8,860,337 - PTAB · Sep 15, 2025 · IPR2025-00632 · APJ Mitchell G Weatherly · IPR · Institution
The Board instituted IPR on all challenged claims and grounds, finding a reasonable likelihood that claims 1, 2, 7–9, 11, 12, and 20–24 are obvious over Yamaguchi-727.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Cerebrum Sensor Technologies, Inc. (“Patent Owner”) timely filed a Preliminary Response. Paper 9 (“Prelim. Resp.”).1 Institution of an inter partes review is authorized by statute when “the information presented in the petition filed under section 311 and any response filed under section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Based on our review of the record, we conclude that Petitioner is reasonably likely to prevail with respect to at least one of the challenged claims.” slip op. at 2
- BurdenInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Petitioner complies with the requirement of identifying “[h]ow the claim language is to be construed” by setting forth proposed interpretations of various claim terms in the table above.7 Both cases cited by Patent Owner relate to an issue presented by a petitioner’s alleged inconsistent handling of whether a claim term is subject to interpretation as a means-plus-function element under 35 U.S.C. § 112(f). Orthopediatrics Corp. v. K2M, Inc., IPR2018-01546, Paper 10 at 11 (PTAB Feb. 14, 2019); 10x Genomics, Inc. v. President and Fellows of Harvard College, IPR2023- 7 Neither party has identified any claim language that might invoke interpretation as a means-plus-function limitation, and we discern no such claim language. Additionally, we do not imply that a petitioner must always propose express interpretations for specific claim language to comply with Rule 42.104(b)(3). Rather, we only note that Petitioner has, by any measure, complied by expressly proposing interpretations for identified claim language.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“We disagree. Positioning module 6 to face a “predetermined direction” is a form of preventing movement that falls within the scope of limitation 1b. Moreover, Yamaguchi-727 uses a method for preventing movement of its module 6 in its housing 20, silicone potting material, that is expressly recognized by the Specification of the ’421 patent when it states: “A common technique used to assist in fixturing the electrical sensor device 40 known within the automotive industry is to fill the internal cavity with a coating material such as a neutral silicone or the like for purposes of retaining placement position.” Ex. 1001, 13:56–60. Although the Specification also asserts that the sensor assemblies disclosed in the 421 patent “do not use or require the use of any such coating or filing agents or materials for any fixturing of the electrical sensor device 40,” id. at 13:61–64, limitation 1b merely requires that the “sensor device . . . is disposed within the internal cavity and attached therein to prevent movement of the device within the internal cavity,” id. at 30:25–27. Absent a persuasive argument to the contrary, we preliminarily conclude that Yamaguchi-727’s use of potting material to hold its module 6 in place within its housing 20 meets the requirements of limitation 1b. Both parties are encouraged to adduce intrinsic evidence relating to the meaning of limitation 1b at trial. For all the reasons set forth above, we find that Petitioner has established a reasonable likelihood of proving the Yamaguchi-727 renders claim 1 unpatentable as obvious. 2. Dependent Claims 2, 7–9, 11, 12, and 20–24 Petitioner identifies the portions of Yamaguchi-727 that teach the limitations introduced in dependent claims 2, 7–9, 11, 12, and 20–24, all of which ultimately depend from claim 1. Pet. 32–40. Patent Owner relies upon its argument that Petitioner’s showing for claim 1 is deficient as the reason why Petitioner’s challenge to dependent claims 2, 7–9, 11, 12, and 20–24 fails. We reject this argument for the reasons stated in Part II.C.1 above. Based on our review of Petitioner’s otherwise uncontested argument and evidence cited in support, we find that Petitioner also establishes a reasonable likelihood of proving that Yamaguchi-727 renders dependent claims 2, 7–9, 11, 12, and 20–24 unpatentable as obvious. D. Remaining Challenges” slip op. at 11
Claim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,835,421 - PTAB · Aug 25, 2025 · IPR2025-00631 · APJ Kevin W Cherry · IPR · Institution
The Board instituted IPR on claims 1–3, 5, 7–9, 11–13, and 15–22 on all five asserted § 103 grounds, finding a reasonable likelihood of success on at least one claim.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“institute an inter partes review. The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted unless “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” The Supreme Court has held that the Board, in a decision to institute under 35 U.S.C. § 314(b), may not institute review on less than all claims challenged in the petition. SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1355–56 (2018). Moreover, in accordance with our rules, “[w]hen instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2020); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-or-no institution choice respecting a petition, embracing all challenges included in the petition”). Applying those standards, and upon considering the Petition, the Preliminary Response, and the evidence of record, we determine the information presented shows a reasonable likelihood that Petitioner would prevail in establishing the unpatentability of at least one of the challenged claims of the ’027 patent. Accordingly, we institute an inter partes review of all challenged claims (i.e., 1–3, 5, 7–9, 11–13, and 15–22) of the ’027 patent, based on the grounds asserted in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art would have “possessed an undergraduate degree in chemistry, polymers, materials science, chemical engineering (or related field) and one to two years of experience with constructing and manufacturing tires, tire patches, tire decals/stickers and/or the like.” Pet. 8 (citing Ex. 1003 ¶¶ 6–11). According to Petitioner, “Additional education could compensate for less practical experience. Conversely, additional practical experience could compensate for less education.” Id. Patent Owner does not provide an alternate definition, but, “Patent Owner does not acquiesce to, and reserves the right to address, [Petitioner’s] definition of a POSA.” Prelim. Resp. 6 n.6. Petitioner’s proposed definition appears to be consistent with the disclosure of the ’027 patent, and we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that the prior art itself may “reflect[] an appropriate level” of ordinary skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Having considered the record, we determine that no express claim construction is necessary for any claim terms. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Instituted
“We disagree with Patent Owner’s contentions that these disclosures indicate that Wilson’s patch would not meet the construction of “barrier material composition.” None of these disclosures even suggests that the base of Wilson’s patch is rigid as Patent Owner suggests. To begin with, the fact that the housing is “more rigid” provides no information about the absolute rigidness of the patch. See Ex. 1009, 9:16–21. As for the disclosure that the patch is contoured (id. at 3:35–67), Patent Owner provides only attorney argument to support its contention that the contour demonstrates that Wilson’s patch must be so rigid that it cannot be meet the claim limitation. In contrast, Petitioner demonstrates that Wilson discloses using the exact same materials described in the challenged patent (see Ex. 1001, 6:33–58 (noting “[e]lastomeric materials useful for forming the intermediate layer 24 include but are not limited to gum rubber, vulcanized natural rubber SBR . . . or comparable materials”); Ex. 1009, 3:49–55 (noting the patch may be constructed from natural rubber (NR), a preferred mixture of chlorobutyl rubber and natural rubber (CR/NR), or a preferred mixture of SBR and natural rubber (SBR/NR)), and provides detailed testimony from its expert to support its contentions (see Ex. 1003 ¶¶ 114–119). On the current record, we find Petitioner’s reasoning and evidence to be persuasive, and find that Petitioner has shown sufficiently that Willson discloses or teaches this limitation.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,124,027
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.