PTAB
Advanced fields
35 decisions · 565msnewest first
  • PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

    Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

    RulingsRemand decision
    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

      “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

    • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

      “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

    Patent outcomesUS 10,647,861 not shown unpatentable
    § 102 anticipation§ 103 obviousness
    Patents in suitUS 10,647,861
  • PTAB · Jul 21, 2025 · IPR2021-01150 · APJ Stacey G White · IPR · Remand

    On remand, the Board held that Petitioner had not shown claims 1–18 unpatentable under § 103 over Paxton, Sutton, and Ivershen because the combination did not teach or motivate transmission responsive to correlation.

    RulingsRemand decision
    • RemandOther

      “the Final Written Decision for “not clearly explaining its holding or rationale regarding motivation to combine and whether the proposed combination teaches the final limitation of claim 1: transmitting an indication of the first host responsive to the correlating.” Palo Alto Networks, 122 F.4th at 1384. In the opinion, the Federal Circuit explained that the Final Written Decision “never made a clear finding on whether a person of ordinary skill in the art would have been motivated to modify Paxton by adding Sutton’s step of transmitting a notification of malicious activity after Paxton’s correlation step,” as proposed by Petitioner. Id. at 1385. The Federal Circuit stated that the Board “failed to explain why a person of ordinary skill in the art would not have been motivated to modify Paxton to provide the recited notification as taught by Sutton in response to the correlation disclosed in Paxton.” Id. The Federal Circuit concluded that “[b]y reading Paxton and Sutton in isolation, the Board erred,” and that we vacate and remand for the Board to clarify and explain its holding on whether a person of ordinary skill in the art would have been motivated to transmit the identity of the first host (e.g., to an administrator) as taught by Sutton, responsive to the correlating disclosed by Paxton to improve network security.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “the alleged invention of the ’903 patent “had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field, and approximately 2–3 years of experience in the design or development of telecommunication systems, or the equivalent.” Pet. 13 (citing Ex. 1003 ¶¶ 18–20). Petitioner further notes that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. Patent Owner’s proposed level of ordinary skill is similar, with Patent Owner contending that the ordinary skilled artisan “would be someone with a bachelor’s degree in computer science, electrical engineering, or related field, and either (1) two or more years of industry experience and/or (2) an advanced degree in computer science or related field.” PO Resp. 12–13 (citing Ex. 2019 ¶¶ 27– 31). Similar to Petitioner, Patent Owner also states that a person of ordinary skill in the art “may have additional industry experience in lieu of a formal degree.” Id. at 13.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “After review of the current record, we conclude that no express claim construction is necessary for the purposes of this Decision. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”).” slip op. at 12

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

      “responsive to the correlation, we are not persuaded that one of ordinary skill in the art would have been motivated to combine the teachings of these references in the manner advocated by Petitioner. Petitioner contends that this combination would only involve “[t]he application of known techniques (e.g., Sutton’s implementation of rules and data to define security policies, disallowed websites, etc.) to improve similar devices (e.g., servers, gateways, firewalls, etc. in Sutton’s and Paxton’s systems) to provide predictable results in the same way (e.g., to provide packet-filtering functions preventing communications with potentially malicious hosts).” Id. at 22–23.” slip op. at 25

    Patent outcomesUS 10,530,903 not shown unpatentable
    Claim construction§ 103 obviousnesscites Graham
    Patents in suitUS 10,530,903
  • PTAB · Apr 30, 2025 · IPR2024-00114 · APJ Jon M Jurgovan · IPR · Final written decision

    Claims 1–8 were not shown unpatentable because DiPerna964 and Strack do not teach or suggest the panic button readying itself to perform the claimed functions.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

      “After review of the ’404 patent’s description, we find no disclosure that pressing the panic button together with another button causes the panic button to ready itself to perform functions (1) and (2) as recited in limitation 1[d]. The closest descriptions we find to limitation 1[d] are that the safety switch readies the panic button to contact 911 (Ex. 1001, 6:59–62), that the panic button may be activated by pressing the panic button with another button (id., 3:59–67, and that the panic button may start a speech recognition process that can trigger the device (id., 7:61–62). Consequently, claim 1 is itself the best source for determining what the claim language means. We determine that the ordinary and customary meaning of the “ready itself” feature of claim 1 is that the panic button “prepares itself to be triggered to perform the panic button functions (1) and (2).” Since the intrinsic evidence is sufficiently clear to discern the meaning of the “ready itself” limitation, we do not resort to extrinsic evidence. See Phillips, 415 F.3d at 1317 (explaining that extrinsic evidence is less significant than intrinsic evidence); Seabed Geosolutions (US) Inc. v. Magseis FF LLC, 8 F.4th 1285, 1287 (Fed. Cir. 2021) (Court of Appeals gives primacy to intrinsic evidence and resorts to extrinsic evidence only if consistent with intrinsic evidence); Sequoia Tech., LLC v. Dell, Inc., 66 F.4th 1317, 1324 (Fed. Cir. 2023) (Court of Appeals stating that its “decision rests solely on the intrinsic evidence”).” slip op. at 9

    • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner

      “Thus, the ’353 application describes that moving the safety switch into position readies the panic button to contact 911, which is not the same as the panic button being activated to ready itself to perform functions (1) and (2) required by claim 1 of the ’404 patent. Patent Owner’s reliance on disclosures elsewhere in the ’353 application is unavailing. PO Resp. 5–8 (citing Ex. 1006, 15, 17, 19–21, 23, 25); PO Sur-Reply 2–3 (citing Ex. 1006, 15, 17, 19–20, 24–25)). For example, while the ’353 application does mention voice activation with a codeword and activation by depressing of the panic button together with another button (see, e.g., Ex. 1006, 17, 21, 24–25), it does not mention that depressing the panic button together with another button causes the panic button to ready itself to perform recited functions (1) and (2). The application explains that “[t]he [panic] button can send a signal to a controller inside the device to activate [the code word activation] process” and “[t]he [panic] button can start the speech recognition process in one embodiment, to trigger the device.” Ex. 1006, 25. But that describes readying the device for activation by the code word, not readying the button to perform the recited functions. The ’353 application also mentions the word “ready” in relation to using a self-defense mechanism such as pepper spray, which does not appear to be related the readying of the panic button recited in claim 1. Ex. 1006, 15, 19–20. Petitioner has thus met its burden to demonstrate that claims 1–8 of the ’404 patent lack written description support for a panic button adapted to “ready itself” to perform the recited functions because the limitation is not present in the ’353 application to which the ’404 patent claims priority.3 Pet. 8–10. The burden of production thus shifted to Patent Owner to demonstrate that the ’353 application has written description support for limitation 1[d], which it has not done on this record. PO Resp. 5–8; PO Sur-Reply 2–3.” slip op. at 15

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “DiPerna964 discloses a separate “safety” switch that readies the panic button to contact 911 upon being pressed (Ex. 1028 ¶ 41), but there is no mention of pressing the panic button together with another button to cause the panic button to “ready itself” to perform panic button functions (1) dialing a public or private network for an emergency purpose and (2) activating the transmitting unit, as limitations 1[d] and 1[e] require. DiPerna964 mentions pressing two buttons together to activate the panic button (see, e.g., Ex. 1028 ¶¶ 17, 23–25, 27), but not to “ready itself” to perform recited functions (1) and (2). Petitioner relies on Strack’s triggering the collection of audio, video, and location data for transmission to a remote location as equivalent to a panic button readying itself to, when activated, perform the panic button functions (1) dialing a public or private network for an emergency purpose and (2) activating the transmitting unit. Pet. 15–17 (citing Ex. 1002 ¶¶ 76–88). We do not agree with Petitioner’s contention because Petitioner fails to explain how Strack’s button press that collects and then transmits audio, video, and location data would ready the panic button to perform recited functions (1) and (2). It appears that Strack’s button press readies the device, not the button, to perform the functions. As neither DiPerna964 nor Strack nor their combination teach or suggest limitations 1[d] and 1[e], we determine it is unnecessary to proceed further with the obviousness analysis. PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1194 (Fed. Cir. 2014) (citing Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1164 (Fed.Cir.2006) (stating that we consider motivation to combine and reasonable expectation of success only “if all the elements of an invention are found in a combination of prior art references”)).” slip op. at 21

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner does not dispute Petitioner’s proposed level of skill in the art, which appears consistent with the educational level, technology, problems and solutions identified in the ’404 patent and prior art references asserted by Petitioner. Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (the applied prior art may reflect an appropriate level of skill). Accordingly, we apply Petitioner’s proposed level in this Decision.” slip op. at 18

    Patent outcomesUS 11,265,404 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 11,265,404
  • PTAB · Mar 25, 2025 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Final written decision

    Claims 1–3 were not shown unpatentable under any of five § 103 grounds because Petitioner failed to establish sufficient motivation to modify or combine the prior art.

    RulingsFinal written decision
    • BurdenNot shown unpatentable

      “A petition must identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3) Here, Petitioner merely provides general assertions about multiple references, without clearly identifying how, or why a POSITA would have been motivated, to modify the processes disclosed in those references to arrive at the claimed invention. Thus, the Petition does not state with particularity that Saxler’s particular technique for etching is to be used instead of Beach’s etching step when substituting Beach’s self-aligned process for Saxler’s two mask process. Nor does the Petitioner provide a sufficient reason, absent hindsight, why a POSITA would have been motivated to combine the references to result in a process that forms Saxler’s Modified Figure 1A. Thus, for these additional reasons, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Saxler, Beach, and Shenoy.” slip op. at 34

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Both parties agree that the differences between the definitions do not impact the analysis. Resp. 11; Reply 2. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. We also note that our Decision would be the same under either parties’ definition.” slip op. at 13

    • Expert testimonyOther

      “Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “remove the recess in Saxler Figure 1A to arrive at the allegedly enhancement mode transistor of Modified Figure 1A. Contrary to Petitioner’s assertions in its Reply and at the hearing, the Petition makes no argument that a POSITA would have removed the recess from Saxler Figure 1A to realize the benefits of an enhancement mode transistor. See Reply 4–5; Pet. 24–68. Rather, the Petition merely asserts that a POSITA would have understood that the gate recess of Figure 1A is optional without providing any persuasive reason why a POSITA would have removed the gate recess but retained the sloped sidewalls of Figure 1A. Pet. 25, 40, 45. For example, Petitioner asserts that Saxler’s gate contact may be “recessed or non-recessed” and that when the gate recess shown in Figure 1A is not utilized, Saxler would have the structure of Saxler Modified Figure 1A. Pet. 25 (citing Ex. 1003 ¶ 81; Ex. 1007 ¶ 52, 66); see also Pet. 40, 45 (citing Ex. 1007 ¶ 52). Neither of these paragraphs provide sufficient motivation to a POSITA to remove the gate recess from Saxler Figure 1A. Saxler paragraph 52 states: Exemplary devices according to some embodiments of the present invention are schematically illustrated in FIGS. 1A through 6. Thus, while embodiments of the present invention are described herein with reference to a recessed gate structure or a non-recessed gate structure, other embodiments of the present invention may include or not include a gate recess. Accordingly, embodiments of the present invention should not be construed as limited to the particular exemplary embodiments described herein but may include any suitable structure having a cap layer and/or passivation layer as described herein. Ex. 1007 ¶ 52. Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

    Patent outcomesUS 9,748,347 not shown unpatentable
    § 103 obviousnesscites Phillips · KSR
    Patents in suitUS 9,748,347
  • PTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision

    Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.

    RulingsFinal written decision
    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

      “During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13

    • ExcludeDenied

      “III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47

    Patent outcomesUS 8,404,508 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR
    Patents in suitUS 8,404,508
  • PTAB · Mar 13, 2025 · IPR2023-01422 · APJ Jon M Jurgovan · IPR · Final written decision

    The Board held claims 1–2, 4–9, 11–14, 16–17, and 19–25 not shown unpatentable over the asserted obviousness grounds, principally because the combinations lacked claimed limitations.

    RulingsFinal written decision
    • Skill levelSkill level board ownDecided for patent owner

      “Considering the applicable factors in light of the parties’ contentions, we adopt the following level of ordinary skill in the art, which we apply in this Decision: A person of ordinary skill in the art would have had an undergraduate degree in mechanical or electrical engineering and two to three years of work experience with electro-optical and electro-mechanical devices or systems, relevant to light ranging systems. Less work experience would have been compensated by a higher level of education or vice versa. The work experience would have included at least one year relevant to light ranging systems including LIDAR with a rotor-stator structure. We determine that this level of skill is consistent with the problems and solutions identified in the ’515 patent and the prior art. See, e.g., Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001); Ex. 1001, 1:30–3:48; Ex. 1004 ¶¶ 3–10; Ex. 1005, 1:1–2:31; Ex. 1006, 1:1–2:60; Ex. 1007, 1. We also determine that the proposed level of skill is reflective of the education and experience a person of ordinary skill would have had. Ex. 1003 ¶¶ 39–41; Ex. 2004 ¶¶ 67–68.” slip op. at 19

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

      “We determine that the claimed “stator circuit board” and “stator assembly” are separate and distinct elements in claims 1 and 14 because they are set forth as separate elements in these claims. See Ex. 1001, 48:27–29, 48:37–42, 50:8–10. Similarly, claim 22 recites “a stator circuit board assembly” that includes as subcomponents “a first circuit board,” “a second circuit board,” and a “stator assembly” which are separate and distinct subelements. Id. at 51:49–59. “Where a claim lists elements separately, ‘the clear implication of the claim language is that those elements are ‘distinct component[s]’ of the invention.” Becton, Dickinson and Co. v. Tyco Healthcare Gr., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (citing Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996)). This construction is confirmed by the ’515 patent’s specification. For example, the specification states that stator assembly 644 is affixed to circuit board 622, and, consistent with this statement, Figures 6A and 6D show them as separate elements joined together. Ex. 1001, 28:28–31, 30:16–24. Contrary to Petitioner’s contention, the specification’s stating that the stator elements are “built onto” or “integrated on” circuit boards (or assemblies containing them) does not mean that the stator assembly and circuit board are the same thing. Pet. Reply 1 (citing Ex. 1001, 4:19–22, 4:28–31). Rather, the specification describes the stator elements as part of the stator assembly which is coupled to a circuit board, as follows: VII. Integrated Electric Motor According to certain embodiments, an electric rotary motor can be integrated directly onto the circuit boards. The motor can have a "pancake" or "axial" design having a planar rotor assembly on a rotor board that opposes a planar stator assembly on an opposing stator board. The stator and rotor assemblies of the electric motor can be integrated onto the boards of the rotary actuator 608, i.e., the elements of the electric motor are one of many components on the surface of the printed circuit boards and thus a separate motor module is not required for LIDAR system 600. For example, referring back to FIG. 6D, stator assembly 644 can include an annular arrangement of multiple stator elements 644(i), e.g., vertically oriented solenoids (having their longitudinal axes perpendicular to the surface of the board) that are affixed (e.g., using an adhesive) to a board of the lower circuit board assembly 620 (e.g., board 622) or to a soft magnetic core that is then affixed to the lower circuit board assembly 620. Ex. 1001, 30:16–22. Thus, the ’515 patent’s specification expressly states that the stator elements of the stator assembly can be affixed to a printed circuit board, and thus the stator assembly is not the same thing as the board. Other parts of the specification are consistent with this view. See, e.g., id. at 4:54–57, 5:14–18, 6:50–53, 16:22–25.” slip op. at 23

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “We have construed claim 1’s limitation 1(g) to require “stator circuit board” and “stator assembly” that are separate and distinct elements. See § III.C.1, supra. Johnson discloses coil windings that are formed by patterning interleaved structures in a multi-layered printed circuit board (PCB) forming the stator platform 330, and interconnecting them in groups with vias filled with conductive material. Ex. 1005, 11:66–13:57. Figs. 3C–3D; Ex. 2004 ¶¶ 138–139. We agree with Patent Owner that a POSITA would have considered the coil windings to be subcomponents of Johnson’s stator platform 330, which do not define a separate and distinct “stator assembly . . . coupled to a stator circuit board.” Ex. 2004 ¶ 139. In other words, the “printed” conductive tracks and traces would have been considered part of the PCB, not something separate. Id. Although Petitioner contends that Johnson discloses other embodiments in which a stator assembly is comprised of wires wound around a magnetic core (Pet. Reply 14–15 (citing Ex. 1005, 3:30–39, 4:56– 5:7; Ex. 1050 ¶ 30)), Petitioner does not show that Johnson discloses that those embodiments are coupled to a stator circuit board as recited in claim 1’s limitation 1(g). Petitioner did not rely on Pacala, Pardhan, nor Zhang to cover the deficiencies of Johnson. Accordingly, for the above reasons, we determine that Petitioner has” slip op. at 41

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “Patent Owner’s arguments are persuasive. Johnson, Pardhan, and Zhang all disclose transformer coils positioned inside of the rotor/stator elements of the motor. Specifically, Johnson’s Figure 3B shows a transformer coil 310b positioned inside rotor elements (magnets 320, 322, 324, 326), and Figure 3C shows the corresponding transformer coil (unnumbered) inside of the stator coils defined by conductive structures. Ex. 1005, 11:51–60, 13:26–40. Similarly, Pardhan shows in Figure 7B a transformer 740a, 740b positioned inside of rotor/stator elements 738a, 738b, and suggests that a smaller rotary transformer is desirable. Ex. 1006, 20:64–21:13. Likewise, Zhang’s Figures 2 and 3 show an electrical power transmission unit including first coupling coil (5) and second coupling coil (unnumbered) positioned inside of motor coil (2). Ex. 1007, 4–5. Against the teachings of Johnson, Pardhan, and Zhang, Petitioner argues that putting the transformer coils outside of the stator coils would have been an obvious design choice. Pet. 50–51, 54–55. However, as Patent Owner noted, “merely stating that a particular placement of an element is a design choice does not make it obvious.” PO Resp. 50 (citing Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1067–70, 1069 n.4 (Fed. Cir. 2018); Ex. 2004 ¶ 186). That Johnson, Pardhan, and Zhang all disclose the transformer coils inside of the rotor/stator elements of the motor suggests that there were good reasons for doing this in their configurations. Zhang expressly teaches that one such reason is to avoid interference with power transmission.15 Ex. 1007, 3. Thus, according to Zhang, moving transformer coils outside of the rotor/stator elements in Petitioner’s combination would undesirably interfere with power transmission such that a POSITA would not have pursued the combination. Accordingly, we find that claim 22’s limitation 22(h) is missing from the combination of Pacala, Johnson, Pardhan, and Zhang.” slip op. at 53

    Patent outcomesUS 11,287,515 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 11,287,515
  • Intel Corporation v. Besang Inc.No claims unpatentable
    PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

    The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

    RulingsFinal written decision
    • Skill levelSkill level patent owner adoptedDecided for patent owner

      “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

      “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

    Patent outcomesUS 7,378,702 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 7,378,702
  • PTAB · Dec 10, 2024 · IPR2023-00847 · APJ Sheila F Mcshane · IPR · Final written decision

    Claims 1–5 were not shown unpatentable on any asserted obviousness ground because the evidence did not establish the claimed data-path delay circuit.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for patent owner

      “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision and with the exception of the qualifier “at least” with respect to experience which renders the level of ordinary skill in the art ambiguous and may encompass levels beyond ordinary, we adopt the assessment offered by Petitioner as it is consistent with the ’608 patent and the asserted prior art.” slip op. at 9

    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

      “1[e], together with limitation 1[f], and note that we are not performing claim construction of a specific claim term or phrase per se. Claim 1 of the ’608 patent recites that “each respective buffer circuit including a data path corresponding to each data signal line in the respective set of data/strobe signal lines” [limitation 1[e]] and “wherein the data path corresponding to the each data signal line includes” . . . “a delay circuit configured to delay a signal through the data path by an amount . . . ” [limitation 1[f]]. Ex. 1001, 19:36–55 (emphasis added). The operative issue is the identification of the “data path” that is claimed in claim 1. The claim differentiates between data signal lines and strobe signal lines. Limitation 1[e] identifies that “a data path” corresponds to the data signal line in the set of data/strobe signal lines; that is, it is a data path that is in the data signal line. The data path claimed, therefore, is not in a strobe signal line of the set of data/strobe signal lines. Limitation 1[f] confirms this understanding, reciting “the data path,” (with the antecedent of “a data path” of limitation 1[e]), that corresponds to each data signal line, and which includes a delay circuit that delays a signal through the data path. Patent Owner refers to Figures 3, 4A, and 4B of the ’608 patent, which confirms this understanding of the language of claim 1 in that it provides written description support for the reading of the explicit language of claim 1. See PO Sur-reply 1–2. These figures, as well as their associated descriptions, support that there are different transmission lines (data paths) with a separate signal transmission line for transmitting/receiving data signals and a separate strobe line for transmitting/transmitting strobe signals. See Ex. 1001, 10:31–11:8, 11:20– 45, Figs. 3, 4A–4B, see also id. code (57) (identifying that the “data path” corresponds with the data signal line in the set of data/strobe signal lines).” slip op. at 16

    • PTAB / AIA Trials › §315(e) estoppelEstoppel does not applyDecided for patent owner

      “(1) the issue is identical to one decided in the first action; (2) the issue was actually litigated in the first action; (3) resolution of the issue was essential to a final judgment in the first action; and (4) [the party against whom collateral estoppel is being asserted] had a full and fair opportunity to litigate the issue in the first action. Google LLC, 54 F.4th at 1381 (citing In re Freeman, 30 F.3d 1459, 1465 (Fed. Cir. 1994) (emphasis added)). The issues in this proceeding and those at issue in the -00236 IPR are not identical. The claims of the ’035 patent and the instant ’608 patent are different. Claim 1 of the ’035 patent recites “each respective buffer circuit including data paths for transmitting respective data and strobe signals associated with the first memory operation and logic configured to respond to the module control signals by enabling the data paths,” “wherein the logic is further configured to obtain timing information based on one or more signals . . . to control timing of the respective data and strobe signals on the data paths.” Ex. 1031, 19:35– 45. Claim 1 of the ’035 patent explicitly recites that the data paths have data and strobe signals transmitted on them. That is unlike claim 1 of the ’608 patent at issue here—claim 1 of the ’035 patent does not recite that the “data path” is “corresponding to each data signal line in the respective set of data/strobe signal lines,” as claim 1 of the ’608 patent does.” slip op. at 20

    • Strike new argumentNew argument consideredGranted in part

      “response, but may not raise “in reply, ‘an entirely new theory of prima facie obviousness absent from the petition,’ even if the new theory is responsive to the patent owner’s response or the Board’s institution decision.” Corephotonics, Ltd. v. Apple Inc., 84 F.4th 990, 1008 (Fed. Cir. 2023) (quoting Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017)).” slip op. at 45

    Patent outcomesUS 10,268,608 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 10,268,608
  • PTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision

    Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.

    RulingsFinal written decision
    • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

      “meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40

    • Expert testimonyPatent owner expert creditedOther

      “We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32

    Patent outcomesUS 7,378,702 not shown unpatentable
    Claim construction§ 103 obviousnesscites KSR · Graham
    Patents in suitUS 7,378,702
  • PTAB · Jan 24, 2024 · IPR2022-01210 · APJ Jon M Jurgovan · IPR · Final written decision

    Claims 1–27 were not shown unpatentable because Petitioner did not establish a reason to combine Chung Embodiment 11 or 12 with Sekine.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner’s declarant, Dr. Bentley, testifies that “a [POSITA] around the time of the invention would have had a bachelor’s degree in physics or optics, and at least three years of experience in the field of optical design, or its equivalent experience.” Ex. 2001 ¶ 28. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill. We note, however, that the two proposed levels of ordinary skill are similar and our analysis and conclusions would not change under Patent Owner’s proposed level of ordinary skill.” slip op. at 12

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “construction, “and only to the extent necessary to resolve the controversy.” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); see also Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999). Petitioner does not propose a specific construction for any terms and instead argues that “no claim terms require specific construction to resolve the unpatentability issues presented” in their Petition. Pet. 12. Patent Owner also does not propose any specific constructions in their Response, nor does their declarant, Dr. Bentley. We determine that no explicit constructions are required to resolve the dispute between the parties.” slip op. at 13

    • Exclude

      “G. Motion to Exclude Patent Owner filed a Motion to Exclude the portions of Mr. Aikens declaration testimony present in Exhibit 1003 and Exhibit 1045 relating to or arising from “lens design studies, simulations, or optimizations using Zemax lens design software, or otherwise rely[ing] on undisclosed facts and data.” Paper 45, 1. Because we do not rely on any of this evidence in this decision in a manner adverse to Patent Owner, we dismiss Patent Owner’s Motion to Exclude.” slip op. at 44

    • PTAB / AIA Trials › Motions to amend / substitute claimsNot reached

      “F. Motion to Amend and Revised Motion to Amend As we determine that motivation to combine has not been shown by a preponderance of the evidence, we dismiss the Motion to Amend and Revised Motion to Amend pursuant to 35 U.S.C. § 316(d) because they were contingent upon our finding a claim of the ’519 patent to be unpatentable. MTA 1; Revised MTA 1.” slip op. at 44

    Patent outcomesUS 9,696,519 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,696,519
Page 1 of 4
← Previous1234Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.