PTAB
Advanced fields
138 decisions · 513msnewest first
  • PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

    Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

    RulingsRemand decision
    • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

      “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

    • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

      “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

    Patent outcomesUS 10,647,861 not shown unpatentable
    § 102 anticipation§ 103 obviousness
    Patents in suitUS 10,647,861
  • PTAB · Oct 7, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Rehearing

    The Board denied Solus’s rehearing request, leaving institution denied for claims 1–8 because the petition did not adequately show motivation to combine Hanafusa and Dobashi.

    RulingsRehearing decision
    • RehearingRehearing, deniedDenied

      “of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents” slip op. at 2

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

      “In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve Dobashi’s RSm values. Dobashi teaches that because RSm “can be adopted as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66–3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66– 3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 4

    § 103 obviousness
    Patents in suitUS 11,346,014
  • PTAB · Oct 7, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Rehearing

    The Board denied rehearing and left in place its denial of institution because Petitioner did not show that claims 1–10 were likely obvious over the asserted combinations.

    RulingsRehearing decision
    • RehearingRehearing, deniedDenied

      “II. STANDARD OF REVIEW When rehearing a decision on institution, we do not review the merits of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors.” Arnold Partnership v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004) (citing In re 1 US 2013/0108922 A1, published May 2, 2013 (Ex. 1004, “Shinozaki”). 2 G. Khatibi, Temperature Dependent Elastic and Thermal Properties of Thin Copper Foils, Copper; Proceedings of the International Conference Copper ’06 (2006) (Ex. 1006, “Khatibi”). 3 Korean Patent Pub. No. 10-2012-0003485, published Jan. 10, 2012 (Ex. 1013; Ex. 1014 (English translation), “Toshio”). 4 US 2013/0108887 A1, published May 2, 2013 (Ex. 1012, “Kim”). 5 Griesi, M.B., Characterization of Electrodeposited Copper Foil Surface Roughness for Accurate Conductor Power Loss Modeling (2014) (Master’s Thesis, University of South Carolina) (Ex. 1015, “Griesi”). rehearing has the burden to show that the decision should be modified. 37 C.F.R. § 42.71(d). Additionally, the request for rehearing “must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply.” Id.” slip op. at 2

    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Not shown unpatentable

      “For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE[6] value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added).” slip op. at 4

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “Petitioner, however, does not adequately explain why a POSITA would have been motivated to modify Kim’s copper foil surface to have a Pc value of 19.2 as reported in Griesi. In particular, neither Petitioner nor Dr. Randall points us to, nor do we discern, any teaching in Griesi that a peak count of 19.2 provides any particular benefits or properties that would have lead a POSITA to modify Kim’s copper foil surface as Petitioner proposes. Instead, Petitioner’s arguments that a POSITA would have been motivated to modify Kim’s copper foil surface with Griesi’s peak count patent itself. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 421 (2007) (stating that the fact finder must be aware “of the distortion caused by hindsight bias and must be cautious of arguments reliant upon ex post reasoning”). It was Petitioner’s burden to establish that the combined teachings Kim and Griesi disclose limitation [1g] as proposed. We are not persuaded that we misapprehended Petitioner’s argument when we determined that Petitioner did not meet that burden.” slip op. at 8

    • BurdenDecided for patent owner

      “It was Petitioner’s burden to establish the Khatibi, alone or in combination with Shinozaki, Toshio, and Kim, discloses limitation [1d]. We concluded that Petitioner failed to meet that burden for the reasons explained in our Decision. We are not persuaded that we overlooked or misapprehended Khatibi’s disclosures, or Petitioner’s evidence and explanation thereof, in doing so.7” slip op. at 5

    § 103 obviousnesscites KSR
    Patents in suitUS 10,811,689
  • PTAB · Apr 25, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–8 were unpatentable under the asserted obviousness grounds.

    RulingsInstitution decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “experience working on the development of materials or components for electronic devices such as batteries.” Pet. 2. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less work experience, and additional work experience could compensate for less formal education.” Id. Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’014 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

      “customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). in this proceeding.” Pet. 3. Patent Owner contends that “[t]he Board need not construe any term in order to determine that institution should be denied.” Prelim. Resp. 4. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision. See Realtime Data, 912 F.3d at 1375.” slip op. at 8

    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “For these reasons, we are not persuaded that Petitioner sufficiently establishes that a POSITA would have been motivated to modify Hanafusa in light of Dobashi with a reasonable expectation of success as Petitioner contends. Accordingly, we determine that Petitioner fails to demonstrate a reasonable likelihood of prevailing in its assertion that the subject matter of claim 1, and claims 4 and 8 that depend therefrom, would have been obvious over the combined teachings of Hanafusa and Dobashi.” slip op. at 18

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “Petitioner also focuses on Hanafusa’s teaching that all known methods can be used to make a rough surface low-profile, and Dobashi’s teaching that RSm can be used as an indicator for judgment of the surface, to support its contention that a POSITA would have been motivated to apply Dobashi’s RSm to further achieve Hanafusa’s purpose, without explaining how and why that would be the case. In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness and is rough when RSm is small.” Id. at 3:1–3, 6:27–29. Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66– 3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66–3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 14

    Claim construction§ 103 obviousnesscites Phillips · KSR
    Patents in suitUS 11,346,014
  • PTAB · Apr 23, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–10 were unpatentable over either asserted § 103 ground.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2023). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “II. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art (“POSITA”) “would have had at least an undergraduate degree in materials science, chemical engineering, electrical engineering, or related field, or equivalent knowledge, training, or experience, with at least two years of experience working on the development of materials or components for electronic devices such as batteries.” Pet. 4. Petitioner further contends that “[a]dditional education, such as a graduate degree, could compensate for less 7 We refer to the page numbers added by Petitioner to the bottom-center of the page. formal education.” Id. (citing Ex. 1003 ¶ 10). Patent Owner states that, “[f]or purposes of this Preliminary Response, Patent Owner applies Petitioner’s level of skill for a person of ordinary skill in the art.” Prelim. Resp. 4. For purposes of this Decision, we adopt Petitioner’s undisputed proposed definition because it appears to be consistent with the cited prior art and the disclosure of the ’689 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))).” slip op. at 10

    • Expert testimonyPetitioner expert discountedDecided for patent owner

      “We are not persuaded, on this record, that Petitioner adequately establishes that Khatibi discloses a CTE in the claimed range of 16 to 22 µm/(m·°C.). Petitioner’s argument that Khatibi’s reported values meet this claim limitation are based solely on Dr. Randall’s testimony that Khatibi’s measurement method would produce results that would not significantly differ from results determined using the claimed method. See Pet. 16–18 (citing Ex. 1003 ¶¶ 56–60). Dr. Randall’s testimony, however, is largely conclusory and unsupported by adequate explanation and/or objective evidence. For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added). to little weight. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 12 at 5 (PTAB Feb. 10, 2023) (finding that “the Board was correct in giving little weight to Petitioner’s expert because the expert declaration merely offered conclusory assertions without underlying factual support”); Upjohn Co. v. Mova Pharm. Corp., 225 F.3d 1306, 1311 (Fed. Cir. 2000) (“Lack of factual support for expert opinion to factual determinations, however, may render the testimony of little probative value in a validity determination.” (quoting Ashland Oil, Inc. v. Delta Resins and Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985))); see also In re Ethicon, Inc., 844 F.3d 1344, 1348, 1352 (Fed. Cir. 2017) (concluding that the Board properly gave “little weight” to conclusory expert testimony of objective indicia). Because Petitioner offers Dr. Randall’s testimony to supply a limitation missing from the prior art, namely, the CTE measurement method, and we give Dr. Randall’s unsupported and conclusory testimony little weight, we are not persuaded that Petitioner establishes a reasonable likelihood of showing that Khatibi discloses limitation [1d].” slip op. at 17

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “second surfaces of the electrolytic copper foil ranges from 3 to 92.” Ex. 1001, 13:62–63. Petitioner contends that “Kim teaches that the electrolytic copper foil (e.g., untreated or treated copper foil) having Rz less than 2 µm is advantageous toward battery efficiency and performance,” and, similarly, Griesi describes the use of untreated electrolytic copper foil with an Rz value less than 2 µm in printed circuit boards that are compatible with secondary batteries. Pet. 58–59 (citing Ex. 1012, claim 2, ¶¶ 13, 25, 27; Ex. 1003 ¶ 157). In particular, Petitioner notes that Griesi’s Figure 3.16 describes an “Rz value of 1.2 µm.” Id. at 59 (citing Ex. 1015, 53–54; Ex. 1003 ¶ 158). Petitioner asserts that “Dr. Randall explains that a POSITA would have also recognized another surface roughness-related parameter, Rpc, in Griesi as a potentially useful parameter that can be optimized to further enhance uniformity or generally improve Kim’s copper foil surface, for example, to prevent wrinkles or achieve other advantageous effects.” Id. (citing Ex. 1003 ¶ 159). Although Dr. Randall demonstrates that Griesi’s Pc (or Rpc) value is 19.2 over a 4 mm sampling length (Ex. 1003 ¶ 155), Petitioner does not contend that Griesi addresses this value, or indicates any benefit that might be derived from its use. Instead, Griesi’s Pc value appears to be an incidental finding, which is not discussed or analyzed in the reference. See incidental, unexamined finding would lead a POSITA to import Griesi’s Pc value into Kim’s copper foil, absent a hindsight desire to reconstruct the claimed invention. As such, Petitioner’s arguments with respect to Kim and Griesi are not persuasive. See Cheese Sys. Inc. v. Tetra Pak Cheese and Powder Sys., Inc., 725 F.3d 1341, 1352 (Fed. Cir. 2013) (“Obviousness cannot be based on the hindsight combination of components selectively culled from the prior art to fit the parameters of the patented invention.” (internal quotations marks omitted)). Thus, we are not persuaded, on this record, that the combined disclosures of Kim and Griesi teach all of the elements of limitation [1g].” slip op. at 23

    § 103 obviousnesscites Phillips
    Patents in suitUS 10,811,689
  • PTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution

    The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied

      “whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2

    • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

      “Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15

    • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached

      “Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9

    § 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
    Patents in suitUS 10,480,090
  • PTAB · Mar 25, 2025 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Final written decision

    Claims 1–3 were not shown unpatentable under any of five § 103 grounds because Petitioner failed to establish sufficient motivation to modify or combine the prior art.

    RulingsFinal written decision
    • BurdenNot shown unpatentable

      “A petition must identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3) Here, Petitioner merely provides general assertions about multiple references, without clearly identifying how, or why a POSITA would have been motivated, to modify the processes disclosed in those references to arrive at the claimed invention. Thus, the Petition does not state with particularity that Saxler’s particular technique for etching is to be used instead of Beach’s etching step when substituting Beach’s self-aligned process for Saxler’s two mask process. Nor does the Petitioner provide a sufficient reason, absent hindsight, why a POSITA would have been motivated to combine the references to result in a process that forms Saxler’s Modified Figure 1A. Thus, for these additional reasons, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Saxler, Beach, and Shenoy.” slip op. at 34

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Both parties agree that the differences between the definitions do not impact the analysis. Resp. 11; Reply 2. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. We also note that our Decision would be the same under either parties’ definition.” slip op. at 13

    • Expert testimonyOther

      “Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

      “remove the recess in Saxler Figure 1A to arrive at the allegedly enhancement mode transistor of Modified Figure 1A. Contrary to Petitioner’s assertions in its Reply and at the hearing, the Petition makes no argument that a POSITA would have removed the recess from Saxler Figure 1A to realize the benefits of an enhancement mode transistor. See Reply 4–5; Pet. 24–68. Rather, the Petition merely asserts that a POSITA would have understood that the gate recess of Figure 1A is optional without providing any persuasive reason why a POSITA would have removed the gate recess but retained the sloped sidewalls of Figure 1A. Pet. 25, 40, 45. For example, Petitioner asserts that Saxler’s gate contact may be “recessed or non-recessed” and that when the gate recess shown in Figure 1A is not utilized, Saxler would have the structure of Saxler Modified Figure 1A. Pet. 25 (citing Ex. 1003 ¶ 81; Ex. 1007 ¶ 52, 66); see also Pet. 40, 45 (citing Ex. 1007 ¶ 52). Neither of these paragraphs provide sufficient motivation to a POSITA to remove the gate recess from Saxler Figure 1A. Saxler paragraph 52 states: Exemplary devices according to some embodiments of the present invention are schematically illustrated in FIGS. 1A through 6. Thus, while embodiments of the present invention are described herein with reference to a recessed gate structure or a non-recessed gate structure, other embodiments of the present invention may include or not include a gate recess. Accordingly, embodiments of the present invention should not be construed as limited to the particular exemplary embodiments described herein but may include any suitable structure having a cap layer and/or passivation layer as described herein. Ex. 1007 ¶ 52. Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

    Patent outcomesUS 9,748,347 not shown unpatentable
    § 103 obviousnesscites Phillips · KSR
    Patents in suitUS 9,748,347
  • PTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision

    Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.

    RulingsFinal written decision
    • Expert testimonyPatent owner expert creditedDecided for patent owner

      “We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

      “During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13

    • ExcludeDenied

      “III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47

    Patent outcomesUS 8,404,508 not shown unpatentable
    Claim construction§ 103 obviousnesscites Phillips · KSR
    Patents in suitUS 8,404,508
  • PTAB · Mar 4, 2025 · IPR2024-01180 · APJ Scott B Howard · IPR · Institution

    The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–16 were unpatentable, chiefly because Rao did not teach blocking network access.

    RulingsInstitution decision
    • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

      “determine whether to institute an inter partes review. 35 U.S.C. § 314 (2024); 37 C.F.R. § 42.4(a) (2024). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a). For the reasons set forth below, upon considering the briefing and the evidence of record, we determine that the information presented in the Petition does not establish a reasonable likelihood that Petitioner will prevail with respect to at least one of the challenged claims. Accordingly, we do not institute inter partes review.” slip op. at 2

    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner argues that a person having ordinary skill in the art “would have (1) held at least a bachelor’s degree in computer science, electrical engineering, or a related field, and (2) had three to five years of experience with networking, power consumption of networked computing devices, and/or wireless digital communications systems.” Pet. 4 (citing Ex. 1003 ¶¶ 24–26). Petitioner further argues that “[m]ore related education would compensate for fewer years of work experience (and vice versa).” Id. (citing Ex. 1003 at ¶¶ 24–26). Patent Owner “does not challenge the Petition’s proposed definition.” Prelim. Resp. 8. For purposes of this Decision, we adopt Petitioner’s formulation of a person having ordinary skill in the art, which is not disputed and consistent with the invention claimed in the ’076 patent.” slip op. at 10

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

      “Patent Owner argues that the term “disallow[]” should be given the same construction the parties agreed upon during the district court proceeding. Prelim. Resp. 9. For the purposes of this Decision, we need not expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 11

    • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

      “However, Petitioner does not sufficiently explain where Rao teaches “allow[ing] or disallow[ing]” as recited in claim 1. See Pet. 13–18, 25–30. To the extent Petitioner and Dr. Bims cite to Rao, they reference paragraphs 191 through 193, which discuss how Rao’s filter 322 is used to implement prioritization. See Pet. 15; Ex. 1003 ¶ 65. More specifically, those paragraphs recite using prioritization to place the network packets in different queues based on their priority. See Ex. 1005 ¶¶ 191–193. We see nothing in Rao that teaches or suggest that the network packets would be disallowed, as opposed to simply delayed, based on priority. Id. And, as Patent Owner argues, this finding is consistent with factual findings made by a different panel considering the teachings of Rao in an inter partes review of a related patent. See Prelim. Resp. 16–18 (citing Samsung Elecs. Co v. Headwater Research LLC, IPR2023-01361, Paper 8 (PTAB Mar. 29, 2024) (Decision Denying Institution)). Even if one reads the Petition as arguing that a person having ordinary skill would have modified Rao to include Araujo’s blocking—which we do not—we would not be sufficiently persuaded by that argument. Although Petitioner explains why a person having ordinary skill in the art would want to consider power usage along with whether the application is in the foreground or background, Petitioner does not explain why a person having ordinary skill in the art would have changed prioritization to blocking. See Pet. 13–18. Indeed, such a modification appears to be one that would render Rao “inoperable for its intended purpose.” In re Gordon, 733 F.2d 900, 902 (Fed. Cir. 1984).” slip op. at 18

    Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
    Patents in suitUS 9,198,076
  • PTAB · Feb 19, 2025 · IPR2024-00666 · APJ Stacey G White · IPR · Final written decision

    Claims 1–4 and 6–23 were not shown unpatentable because the asserted combinations did not establish the required determination that access occurred during a predetermined period.

    RulingsFinal written decision
    • Skill levelSkill level petitioner adoptedDecided for petitioner

      “Petitioner asserts that a person of ordinary skill in the art “would have possessed a bachelor’s degree in electrical engineering or computer science, and two years of work experience in the field of network-based computer systems, such as systems for sending and receiving information over local networks and wide area networks (such as the Internet or World Wide Web).” Pet. 5 (citing Ex. 1002 ¶¶ 10–14). Patent Owner does not challenge Petitioner’s description of the level of ordinary skill in the art. See Ex. 2001 ¶ 26 (adopting Petitioner’s proposed level of skill in the art for the purposes of this proceeding). We are persuaded that Petitioner’s description is consistent with the prior art and patent specification. Accordingly, we adopt Petitioner’s description.” slip op. at 8

    • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

      “Petitioner “does not believe claim construction is necessary at this time.” Pet. 7. “Patent Owner does not contend that any terms in the challenged claims require express construction for purposes of evaluating the Petition’s invalidity grounds.” PO Resp. 7. We determine that no claim terms require express construction for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 9

    • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference is prior artDecided for petitioner

      “date of Provisional Application No. 60/858,204 (Ex. 1004, “’204 Provisional”), and is prior art to the ’878 Patent under pre-AIA 35 U.S.C. § 102(e). Pet. 9. Petitioner asserts that the ’204 Provisional provides support for the disclosure of Baig and provides § 112 support for at least one claim in Baig. Id. Petitioner asserts that there are no material differences between Baig and the ’204 Provisional. Id. at 10 (citing Ex. 1002 ¶ 43 (citing Ex. 1005 (redline comparison of Ex. 1003 and Ex. 1004))). Petitioner further contends that the ’204 Provisional includes 17 claims that are identical to the claims in Baig, and, therefore, provides written description support for the corresponding claims in Baig. Id. Petitioner also asserts the ’204 Provisional provides enablement. Id. Patent Owner has not challenged the status of Baig as prior art. See PO Resp. Based on our review of the complete record, we find that Petitioner has shown sufficiently that Baig is entitled to the earlier effective filing date of the ’204 Provisional Application.” slip op. at 12

    • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

      “Patent Owner that the plain language of the claim requires there to be a determination that devices accessed the LAN during the predetermined period of time. The claim language recites that the determining of limitation (a) (which recites the determination of an association between the identifiers) is done using the stored association-detection information (which is alleged to be the cookies and session table of the cited art) “to determine” that the mobile devices have separately accessed the internet through a LAN “during a predetermined period of time.” See Ex. 1001, 24:29–49. Thus, we read this language to require that a determination be made that the required access occurred during a predetermined period of time. This reading of the claim language is accord with the opinion expressed by Petitioner’s expert, Mr. Schmandt, at his deposition.” slip op. at 17

    Patent outcomesUS 10,715,878 not shown unpatentable
    Claim construction§ 102 anticipation§ 103 obviousnesscites Graham
    Patents in suitUS 10,715,878
Page 1 of 14
← Previous12345…Next →

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.