• CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentable
  PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

  Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

    “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

  Patent outcomesUS 10,647,861 not shown unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 10,647,861
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 25, 2025 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–3 were not shown unpatentable under any of five § 103 grounds because Petitioner failed to establish sufficient motivation to modify or combine the prior art.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “A petition must identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3) Here, Petitioner merely provides general assertions about multiple references, without clearly identifying how, or why a POSITA would have been motivated, to modify the processes disclosed in those references to arrive at the claimed invention. Thus, the Petition does not state with particularity that Saxler’s particular technique for etching is to be used instead of Beach’s etching step when substituting Beach’s self-aligned process for Saxler’s two mask process. Nor does the Petitioner provide a sufficient reason, absent hindsight, why a POSITA would have been motivated to combine the references to result in a process that forms Saxler’s Modified Figure 1A. Thus, for these additional reasons, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Saxler, Beach, and Shenoy.” slip op. at 34

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Both parties agree that the differences between the definitions do not impact the analysis. Resp. 11; Reply 2. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. We also note that our Decision would be the same under either parties’ definition.” slip op. at 13

  • Expert testimonyOther

    “Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “remove the recess in Saxler Figure 1A to arrive at the allegedly enhancement mode transistor of Modified Figure 1A. Contrary to Petitioner’s assertions in its Reply and at the hearing, the Petition makes no argument that a POSITA would have removed the recess from Saxler Figure 1A to realize the benefits of an enhancement mode transistor. See Reply 4–5; Pet. 24–68. Rather, the Petition merely asserts that a POSITA would have understood that the gate recess of Figure 1A is optional without providing any persuasive reason why a POSITA would have removed the gate recess but retained the sloped sidewalls of Figure 1A. Pet. 25, 40, 45. For example, Petitioner asserts that Saxler’s gate contact may be “recessed or non-recessed” and that when the gate recess shown in Figure 1A is not utilized, Saxler would have the structure of Saxler Modified Figure 1A. Pet. 25 (citing Ex. 1003 ¶ 81; Ex. 1007 ¶ 52, 66); see also Pet. 40, 45 (citing Ex. 1007 ¶ 52). Neither of these paragraphs provide sufficient motivation to a POSITA to remove the gate recess from Saxler Figure 1A. Saxler paragraph 52 states: Exemplary devices according to some embodiments of the present invention are schematically illustrated in FIGS. 1A through 6. Thus, while embodiments of the present invention are described herein with reference to a recessed gate structure or a non-recessed gate structure, other embodiments of the present invention may include or not include a gate recess. Accordingly, embodiments of the present invention should not be construed as limited to the particular exemplary embodiments described herein but may include any suitable structure having a cap layer and/or passivation layer as described herein. Ex. 1007 ¶ 52. Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

  Patent outcomesUS 9,748,347 not shown unpatentable
  § 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,748,347
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.

  RulingsFinal written decision

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

    “During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13

  • ExcludeDenied

    “III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47

  Patent outcomesUS 8,404,508 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,404,508
• Intel Corporation v. Besang Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

  The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Micron Technology, Inc. / Micron Semiconductor Products, Inc. et al. v. Besang Inc.No claims unpatentable
  PTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40

  • Expert testimonyPatent owner expert creditedOther

    “We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Apple Inc. v. Fintiv, Inc.No claims unpatentable
  PTAB · May 23, 2024 · IPR2023-00398 · APJ George R Hoskins · IPR · Final written decision

  Claims 1–22 were not shown unpatentable as obvious over Dill, Vadhri, and Akashika because Dill was not shown to disclose the claimed Integration Tier Limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We adopt Petitioner’s undisputed formulation of ordinary skill in the art as set forth above, because we are satisfied this formulation generally comports with the level of skill necessary to understand and implement the teachings of the ’196 patent and the asserted prior art. We do not adopt Patent Owner’s annotation to Petitioner’s formulation as requiring knowledge of “mobile wallets” specifically, because we determine knowledge of “mobile payment systems and techniques” per Petitioner’s formulation is tied sufficiently to the claims of the ’196 patent to reflect the level of ordinary skill in the pertinent art. At the same time, even if we were to include knowledge of “mobile wallets” in our formulation, it would not materially change our Decision as set forth below. That is, we would still determine Petitioner has not shown by a preponderance of the evidence that Dill discloses the Integration Tier Limitation.” slip op. at 10

  • Expert testimonyNot reached

    “We need not resolve the parties’ dispute as to whether Dr. Houh qualifies as an ordinarily skilled artisan. Even assuming that Dr. Houh possesses, at a minimum, ordinary skill in the art—as we have done in this Decision—we determine Petitioner still fails to show that any of the challenged claims are unpatentable.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “The Integration Tier Limitation requires no further construction for purposes of this proceeding. See Pet. Reply 7 (“[N]o specific construction is required.”). The claim clearly specifies that the claimed “web services communication mechanisms” must serve as an interface between the integration tier and (1) the claimed mobile wallet application and, separately, (2) “a plurality of different device types over a plurality of different communication channels.” For purposes of this Decision, we assume that this interface may be direct or indirect. See id. at 6 (asserting that “communication channels that interface, even indirectly, with the ‘web services communication mechanisms’ still interface with the ‘web services communication mechanisms’”).” slip op. at 28

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “However, we find that of those four channels (1)–(4), only the first channel (1) is associated with web interface 137 such that it qualifies as a “communication channel,” as required by claim 1. There is no indication in the Dill disclosures cited by Petitioner that any of the other three channels (2)–(4) are associated with web interface 137. For example, Figure 9 of Dill includes a double-headed arrow to illustrate communication between web interface 137 and transfer options module 145, but Figure 9 does not include any arrows to illustrate communication between web interface 137 and any one or more of IVR interface 136, other interfaces 138, agent system 135, or mobile network 115. See Ex. 1005, Fig. 9. In other words, Petitioner fails to show Dill teaches web interface 137 interfaces with any devices over any of channels (2)–(4), as would be required by Petitioner’s mapping. In the Petition, Petitioner never clearly (or persuasively) addresses this requirement of the claim. Petitioner does contend that transfer options module 145 is coupled to various devices via interfaces 136–138 and exchanges transaction information (see Pet. 25–26; see also Pet. Reply 10– 11), but that contention misses the mark. The salient question is whether Dill’s web interface 137 (i.e., the claimed “web services communication mechanisms”) interfaces with the different device types over the channels, not whether transfer options module 145 (i.e., the claimed “integration tier”) does so.” slip op. at 30

  Patent outcomesUS 10,438,196 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,438,196
• Apple Inc. v. Fintiv, Inc.No claims unpatentable
  PTAB · May 23, 2024 · IPR2023-00399 · APJ Juliet Mitchell Dirba · IPR · Final written decision

  Claims 1–22 were not shown unpatentable under § 103 over Dill, Vadhri, and Akashika because Dill did not teach or render obvious the hardware SIM card and integration tier limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Institution Decision, we determined that a person of ordinary skill in the art would have had “a bachelor’s degree in electrical engineering, computer science, or equivalent training, and approximately two years of work experience in software development with a basic knowledge of accounting” and “working knowledge of mobile payment systems and techniques,” as Petitioner proposes. Inst. Dec. 9 (quoting Pet. 3–4). We stated that “this definition generally comports with the level of skill necessary to understand and implement the teachings of the ’488 patent and the asserted prior art.” Id. (citing Ex. 1003 ¶ 22; Ex. 2001 ¶ 35).” slip op. at 10

  • Expert testimonyPetitioner expert discountedMixed

    “In addition, Petitioner’s reliance on Dr. Houh’s testimony (see Pet. 23–24) is unavailing. Although Dr. Houh agrees with the arguments in the Petition and includes quotes from the cited portions of Dill and Bykov (see Ex. 1002 ¶¶ 95–97), he provides no additional analysis or explanation beyond what was provided in the Petition. As a result, his testimony suffers the same deficiencies as the Petition. Also, we do not credit his conclusion that Dill includes the requisite disclosure (see id. ¶ 97) because he fails to provide sufficient supporting explanation or evidence (see 37 C.F.R. § 42.65(a)). Finally, we note that Petitioner misrepresents Dr. Shamos’s testimony by stating that Dr. Shamos “agrees that if a mobile device executes a mobile wallet over a cellular network, the mobile device has a SIM card for the mobile wallet.” Pet. Reply 22 (emphasis added) (citing Ex. 1022, 29:4–7, 40:9–10). In the cited testimony, Dr. Shamos agrees that mobile devices have SIM cards, but he does not address where a mobile wallet application would be installed. Ex. 1022, 29:4–7, 40:9–10. Thus, contrary to Petitioner’s argument, we determine that Dr. Shamos’s testimony does not support Petitioner’s position.” slip op. at 27

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “for the term “hardware SIM card” because the important points are undisputed. In particular, the parties agree that a “hardware SIM card” is a SIM card implemented in hardware rather than software. See Pet. Reply 9 (citing Ex. 1021 ¶ 36); Tr. 40:25–41:2 (Patent Owner’s counsel explaining that the language in its proposed construction was “to differentiate it from a software SIM card”); see also PO Resp. 16, 19 (asserting that the term refers to a specific type of hardware, namely a “chip” or a “smart card”) (citing Ex. 2003 ¶¶ 32–33). The parties also agree that an ordinarily skilled artisan would have known that a “SIM card” is a component in a mobile device involved in identifying and authenticating a user to a mobile network. See Tr. 30:23–31:3 (Petitioner’s counsel stating “a SIM card, just as known in the art . . . would allow the user to be able to access the mobile network” 10 Each page in Exhibit 2021 includes at least two page numbers. For clarity, we refer to the page number of the exhibit (shown in the bottom right corner), and we have adjusted Patent Owner’s citation accordingly. given “the user’s identification information on it”), 39:24–40:2 (Patent Owner’s counsel stating that “I think everyone is in agreement that the critical aspect of what makes a SIM card a SIM card is that it can authenticate a mobile device to a wireless network”). The evidence supports the parties’ understanding. The word “SIM” is an acronym for “subscriber identity module” (see, e.g., Ex. 1001, 6:58–67; Ex. 2021, 5), and the record shows that a SIM is a specific component in a mobile device that is involved in identifying and authenticating a user to a mobile network (see Ex. 2003 ¶¶ 30–31; see also e.g., Ex. 2021, 7 (stating that a SIM’s “primary function” is “to authenticate the subscriber to the network”); Ex. 2025, 3 (describing the SIM)).11 Consequently, we determine that an ordinarily skilled artisan would have understood a “hardware SIM card” to be a hardware component in a mobile device that is involved in identifying and authenticating a user to a mobile network. We do not need to further construe the term, or determine whether the additional requirements proposed by Patent Owner are appropriate, because Petitioner fails to show that the prior art teaches or suggests the claimed “hardware SIM card,” as explained below. See infra § II.D.2.a (analyzing the parties’ substantive contentions).” slip op. at 13

  • BurdenNot shown unpatentable

    “Petitioner has not shown, by a preponderance of the evidence, that Dill discloses “a mobile wallet application installed on a hardware SIM card,” as required by element 1.3B. See Pet. 23–24. In particular, even assuming that Dill teaches installing a mobile wallet application somewhere on a mobile device (see Pet. 23),14 Dill does not teach installing it on a hardware SIM card,15 as specifically required by the claim. Petitioner relies upon paragraph 106 of Dill (see Pet. 23), but that paragraph does not disclose this claim limitation (see Ex. 1005 ¶ 106). In relevant part, that paragraph of Dill simply states: 14 Patent Owner disagrees with this premise, arguing that Dill does not disclose a mobile device that includes a mobile wallet application. See PO Resp. 52–56. We need not resolve that dispute because, even assuming Petitioner’s premise (as we have done in this Decision), Petitioner still fails to show that the claims are unpatentable. 15 As noted above, a “hardware SIM card” is a hardware component in a mobile device that is involved in identifying and authenticating a user to a mobile network. See supra § II.C.1 (addressing meaning of term). It should also be appreciated that the methods described above may be performed by hardware components or may be embodied in sequences of machine-executable instructions, which may be used to cause a machine such as a general-purpose or special-purpose processor or logic circuits programmed with the instructions to perform the methods. These machine-executable instructions may be stored on one or more machine readable mediums, such as CD-ROMs or other type of optical disks, floppy diskettes, ROMs, RAMs, EPROMs, EEPROMs, magnetic or optical cards, flash memory, or other types of machine-readable mediums suitable for storing electronic instructions. Alternatively, the methods may be performed by a combination of hardware and software. Ex. 1005 ¶ 106 (emphases added). This teaches storing instructions on “other types of machine-readable mediums,” but it fails to teach storing instructions on a hardware SIM card, much less storing Dill’s mobile wallet application there. In short, Dill is silent with respect to this issue, and silence is not disclosure. Notably, Petitioner does not contend (or show) that a mobile wallet application installed on a mobile device would necessarily be installed on a hardware SIM card. See Pet. 23–24; Ex. 1003 ¶¶ 95–97. Indeed, the record indicates that a mobile wallet application installed on a mobile device could instead be installed on a different component. See, e.g., Ex. 1001, 7:1–3, 9:33–35 (identifying device memory as alternate component); Ex. 2021, 5 (describing SIM as the “smaller of two computer chips inside a GSM mobile handset”); cf. Pet. Reply 9 (distinguishing between hardware SIM cards and software ones). Thus, Petitioner fails to show that this claim limitation is inherent in Dill. See PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1196 (Fed. Cir. 2014) (explaining that inherency requires a showing that “the limitation at issue necessarily must be present”).” slip op. at 22

  Patent outcomesUS 9,208,488 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,208,488
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.No claims unpatentable
  PTAB · May 25, 2023 · IPR2022-00101 · APJ Scott Raevsky · IPR · Final written decision

  Claims 1–7, 11, 12, and 14 were not shown unpatentable: the asserted obviousness combinations failed to establish required LED voltage matching or a clear, workable combination.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We are persuaded that Patent Owner’s proposal is more consistent with the problems and solutions in the ’583 patent and prior art of record. We agree that Petitioner’s proposal is overbroad in that it encompasses artisans without LED circuit design experience (“and two or more years of experience with LED devices and/or related circuit design . . .” (emphasis added)). Patent Owner’s definition, in contrast, requires “two or more years of experience with LED devices and related LED circuit design.” We therefore adopt Patent Owner’s definition of the level of skill, but we note that the outcome here would not have changed had we adopted Petitioner’s level of skill.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “preliminarily agreed with Patent Owner that “substrate” may mean “a surface where ‘LEDs, capacitors and/or resistors are formed or mounted.’” Pet. 7; Dec. 19 (quoting Prelim. Resp. 22). We instructed the parties to address the meaning of “substrate” more fully at trial. Dec. 19–20 n.13. Post-institution, the parties propose the following competing constructions for the term “substrate”:” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “(2) Our analysis We agree with Patent Owner. Patent Owner’s plain reading of limitation 1(c) is correct, and under this reading, the combination of Shackle and Birrell fails to disclose or suggest limitation 1(c). Limitation 1(c) states in part: “at least one LED circuit having any number of LEDs . . . needed to approximately match the forward voltage drop of a first input voltage to the LED driver.” Ex. 1001, 27:22–25 (emphasis added). We have omitted the language “connected in series or series parallel” to highlight the grammatical relationship between the noun phrase “any number of LEDs” and the verb phrase “needed to approximately match.” The plain reading of this limitation is that the at least one LED circuit has any number of LEDs needed to approximately match the forward voltage drop of the LED driver input. Petitioner’s reading, that “the at least one LED circuit,” rather than “any number of LEDs,” must approximately match the forward voltage drop of the LED driver input, is strained and not grammatically plausible. See Reply 1–3. Petitioner does not assert there is an express disclaimer or disavowal in the specification that supports its position; Petitioner instead relies on examples disclosed in the specification to support its faulty interpretation of limitation 1(c). See Reply 2–3. These arguments are unpersuasive. It is axiomatic that we must not “limit[] the claimed invention to preferred embodiments or specific examples in the specification.” Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1346–47 (Fed. Cir. 2015). Not only that, but Petitioner’s citations to the specification better support Patent Owner’s position. In Petitioner’s view, the specification requires other non- LED components to be combined with one or more LEDs to “appropriately match the voltage.” Reply 2. The main example Petitioner relies on describes 38 LEDs having a total voltage drop of 114 V in a circuit with a bridge rectifier having a 6 V voltage drop. Id. at 2–3 (citing Ex. 1001, 16:64–17:7). Yet the 114 V voltage drop of the LEDs alone “approximately matches” the input voltage of 120 V, without the contribution of the bridge rectifier (6 V). Id. Indeed, 114 V out of 120 V is a 95% match. Thus, this example supports Patent Owner’s view that it is the voltage drop of the LEDs themselves, not the LED circuit as a whole, that must approximately match the LED driver input. See Sur-reply 6–7.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combination. The first is that the proposed combination is not at all clear. Although Petitioner need not propose a bodily incorporation of different embodiments, Petitioner must provide a “reasoned analysis” explaining what the combination is. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018); In re Keller, 642 F.2d 413, 425 (CCPA 1981); see also Kinetic Concepts, Inc. v. Smith & Nephew, Inc., 688 F.3d 1342, 1368 (Fed. Cir. 2012) (“We must be careful not to allow hindsight reconstruction of references to reach the claimed invention without any explanation as to how or why the references would be combined to produce the claimed invention.”) (citation omitted). But the Petition never explains how or where Piepgras’s glass substrate would be combined with Piepgras’s alleged flexible substrate, the rope light of Figure 31. At most, Petitioner suggests incorporating the illumination device 500 of Figure 42 in the rope light of Figure 31. Pet. 48 (“Piepgras provides for configurations where a reflective platform (reflective substrate) mounts lighting system 500 in a manner applicable generally to the inventions of Piepgras . . ., and thus including the rope lighting application discussed above.”). As for the glass substrate, Petitioner merely states that “a POSITA would have found it predictable to configure the Shackle-Piepgras device to implement a flexible substrate mounted to the glass substrate, wherein at least one of the plurality of LED packages is mounted to the flexible substrate.” Id. (citing Ex. 1002 ¶ 150). This vague statement just parrots the claim language and does not explain anything about how the glass substrate would be included in the combination.” slip op. at 28

  Patent outcomesUS 10,750,583 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,750,583
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCNo claims unpatentable
  PTAB · Dec 12, 2022 · IPR2021-00862 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–24 were not shown unpatentable because Petitioner failed to establish the proposed prior-art combinations and the required motivation to combine with a reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 25; PO Resp. 9–10. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner does not assert that any claim term requires express construction. See Pet. 6 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction because it is not essential to our conclusions on patentability. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “summarized above, we find that the evidence of record does not support a conclusion that it would have been simple, straightforward, or otherwise routine to convert Swinger’s manual HeNe aiming system and Swinger’s surgeon-identification-of-target-tissue step to a computer-controlled, OCT-guided laser system. Even assuming that a person of ordinary skill in the art would have combined the teachings of Swinger and Baikoff to achieve a laser surgical system incorporating an OCT imaging system, that combination still would not have achieved the required “computer system” of the claims and all of its programmed surgical functionality, particularly, using a computer system to construct an anterior capsulotomy cutting region based on the image data. Petitioner relies on the ability of a person of ordinary skill in the art to configure Swinger’s computer control unit with the missing functionality, thus necessitating an electronic conversion of the steps performed using Swinger’s direct visualization method using a HeNe aiming beam to manually identify a surgical treatment region for laser surgery. Ex. 1039, 34:52–57; Ex. 2088 ¶¶ 55–59, 66. That conversion, however, involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and then implement the planned cataract surgery, two technological leaps that the record fails to show were known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and to implement a planned cataract surgery in the lens was commonplace or even considered before the invention.” slip op. at 25

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable

    “The evidence of record demonstrates, however, that modifying an existing corneal surgery system to image and perform surgery on the lens was not the simple task asserted by Petitioner. For example, in a patent application filed in November 2009, Petitioner asserted that due to the different depth ranges for the laser’s focus, “laser systems designed for corneal procedures do not offer solution[s] for the considerable challenges of performing surgery on the lens of the eye.” Ex. 2007, 4:65–67, 5:30–36, code (22). Similarly, in a different patent filed in December 2008, Petitioner outlined the various challenges in developing laser surgery systems for creating incisions in the lens, including the difficulty in focusing a laser beam that propagates through regions of the eye with different optical properties and different curvatures. Ex. 2014, 15:51–16:18, code (22). This patent then states: Because of all the described hard challenges, corneal surgical laser systems are qualitatively simpler than lens surgical lasers. This is well supported by the fact that even though corneal surgical systems were suggested about 40 years ago, none have been adapted successfully for lens surgery to date. Id. at 16:13–18. During prosecution of another patent filed in 2008, and in responses to office actions filed in 2012 and 2013, Petitioner argued that a corneal OCT system “simply will not work” on the lens and that it would not have been obvious to modify such an OCT system to image the lens. Ex. 2015, 898, 1591, 1788. This was because OCT systems designed to image the lens would be required to deliver and scan an imaging beam “to a depth ten times bigger and a depth range ten times bigger” than an OCT system designed to image the cornea. Id. at 1591. According to Petitioner, “it is not obvious” to modify an OCT imaging system to achieve a depth and scanning range that is ten times larger than that disclosed in the art. Id. at 898 (“Increasing a system’s performance by an order of magnitude cannot be regarded as obvious.”), 1590–1591. Petitioner’s arguments presented in its own patents and during their” slip op. at 39

  Patent outcomesUS 8,709,001 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 8,709,001
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCNo claims unpatentable
  PTAB · Dec 12, 2022 · IPR2021-00858 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–19 were not shown unpatentable because Petitioner failed to establish that the asserted prior-art combinations would have been made with a reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 26; PO Resp. 8–9. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner does not assert that any claim term requires express construction. See Pet. 7 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction because it is not essential to our conclusions on patentability. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “Having considered the parties’ positions and evidence of record, summarized above, we find that the evidence of record does not support a conclusion that it would have been simple, straightforward, or otherwise routine to convert Swinger’s manual HeNe aiming system and Swinger’s surgeon-identification-of-target-tissue step to a computer-controlled, OCTguided laser system. Even assuming that a person of ordinary skill in the art would have combined the teachings of Swinger and Baikoff to achieve a laser surgical system incorporating an OCT imaging system, that combination still would not have achieved the required “control system” of the claims and all of its programmed surgical functionality. Petitioner relies on the ability of a person of ordinary skill in the art to configure Swinger’s computer control unit with the missing functionality, thus necessitating an electronic conversion of the steps performed by a surgeon using Swinger’s direct visualization method using a HeNe aiming beam to manually identify a surgical treatment region for laser surgery. Ex. 1039, 34:52–57; Ex. 2088 ¶¶ 55–59, 66. That conversion, however, involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and then implement the planned cataract surgery, two technological leaps that the record fails to show were known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and to implement a planned cataract surgery in the lens was commonplace or even considered before the invention. We recognize that Petitioner directs us to the testimony of Dr. Izatt who opines that a person of ordinary skill in the art would have found it obvious to, for example, use a controller to determine the claimed scanning pattern. Ex. 1001 ¶ 159; Pet. 32–33; Reply 3–5; see also Ex. 1123 ¶ 31 (“Once the anterior capsule is identified, it is a relatively simple process to determine the location to place the capsulotomy.”). Here, however, we agree with Patent Owner that the Petition and supporting testimony fails to provide the requisite reasoned analysis with sufficient evidence to support Petitioner’s position on obviousness. In particular, absent some evidentiary support beyond Dr. Izatt’s and Dr. Tipperman’s bare opinions that it would have been obvious to program a controller to bridge the gap between the functionality disclosed in Swinger and the required functionality of the challenged claims, we are unwilling to accept this line of reasoning. PO Resp. 27; Sur-Reply 4–7; Ex. 1001 ¶ 159; see also DSS, 885 F.3d at 1374 (Fed. Cir. 2018) (A skilled artisan’s “common sense” or “common knowledge” can potentially “fill in a missing limitation only when ‘the limitation in question was unusually simple and the technology particularly straightforward.’” (emphasis omitted)).” slip op. at 25

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Inter partes review must proceed in accordance with the Petition and the arguments set forth therein. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1356 (2018). “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the ground for the challenge to each claim.’” Intelligent Bio-Systems, Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016). Arguments made in a different document, such as an expert’s declaration, may not be incorporated-by-reference in the Petition. 37 C.F.R. § 42.6(a)(3); see also General Access Solutions, Ltd. v. Sprint Spectrum L.P., 811 F. App’x 654, 658 (Fed. Cir. 2020) (noting that the Board did not abuse its discretion in enforcing its rules under 37 C.F.R. § 42.6(a)(3)) (non-precedential)).” slip op. at 35

  Patent outcomesUS 8,425,497 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 8,425,497

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.