• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00728 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–7, 9, 10, 15–18, and 20–24 are unpatentable as obvious over Schaffer with Hartley or Eller; claims 1–3, 5, 6, 9, 15–18, and 21–24 are also obvious over Hartley and Eller.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Petitioner’s proposed POSA definition lacks specificity. That definition, if interpreted generically, could mean that a person may qualify as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2033 ¶ 61. We find that a POSA would also have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:16–54 (background of the invention). Such devices include, but are not limited to, hemostasis valves and catheters for testimony of the parties’ experts, the POSA need not have had first-hand experience designing hemostasis valves. See, e.g., Ex. 1037 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing” hemostasis valves or aspiration catheters is not necessary, but “general experience with vascular devices and procedures” is required). Further, as Dr. Zalesky testified, the POSA’s experience related to developing such devices “could be as simple as bench testing and looking at clinical data.” Id. at 74:5–75:1. Lastly, a POSA would have understood such devices’ design requirements as determined by the needs of the physician, patient, and procedure, which understanding may be informed by work experience or study. Ex. 2030, 24:5–21.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed

    “above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 28

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner

    “Patent Owner cites intrinsic evidence in support of its interpretation, which include claim 1’s recitation of an “active tensioning mechanism” comprising the filament and the Specification’s description of a filament that can be both “loosened” and “tightened.” PO Resp. 14–17 (citing, e.g., Ex. 1001, 9:36–37, 9:53–56 (teaching “the filament 150 is tightened” when the actuator buttons are released and “the filament 150 is loosened” when the buttons are pressed to open the valve)); see also Ex. 2025, 1288 (defining “tension” as to “tighten to a desired or appropriate degree”). These descriptions from the patent are more consistent with the view that the filament is characteristically flexible, not rigid. 10 We reached the same conclusion, based on substantially the same records, in the Institution Decision and the Final Written Decisions in the 1157, 156, and 289 IPRs. Inst. Dec. 14–18; Ex. 1042, 14–24; Ex. 1048, 16–23; Ex. 1049, 14–17 (noting the parties’ agreement at oral hearing that there was no additional argument or evidence about whether a filament requires flexibility that was not already addressed in related matters). After we construed the “filament” term to require flexibility at institution, Petitioner provided no further argument or evidence on this issue in its authorized trial briefing or at oral hearing. See generally Pet. Reply. embodiments (where the filament forms one or more loops like depicted and described in Figures 6–7) require a flexible structure. See, e.g., Ex. 2032, 15–16 (explaining that the device would not work to constrict the tubular sidewall and lumen (analogous to the elongate member defining a lumen of the claims here) if the filament forming the loop(s) was inflexible); Ex. 1001, Figs. 6–7 (filament 150, with sub-filaments 150-A and 150-B). Although flexibility of the filament in the patent’s “bight” embodiments (e.g., as shown in Figures 8 and 9) is less clear, there is a dearth of evidence from Petitioner—either intrinsic or extrinsic to the patent—showing why a POSA would have understood the bights as embracing rigid structures. See Ex. 1001, Figs. 8–9. Moreover, as admitted by Petitioner’s expert, that a filament may be made from various materials described in the patent (e.g., synthetics or metals) does not, absent more information, lead to a conclusion that a filament is “rigid.” Ex. 2030, 125:2–126:4 (testifying “the relative stiffness or rigidity is not clear from those . . . materials without knowing much more information”).” slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We find that Petitioner has not shown, by a preponderance of the evidence, that Schaffer anticipates claim 1 or any of the other challenged claims, each of which requires at least one “filament.” We are unpersuaded above (supra Section III.C), a filament requires flexibility, Petitioner has not demonstrated that Schaffer describes that feature in its valves. Instead, Patent Owner persuades us that Schaffer describes “rigid U-shaped actuating members—not a ‘filament.’” PO Resp. 23–24.13 We find Dr. Zalesky’s interpretation of Schaffer more credible than Mr. Thornton’s on the question of whether a POSA would have regarded Schaffer’s actuating members as being substantially rigid structures. Ex. 2033 ¶¶ 91–100 (testifying, inter alia, that a POSA would have understood from Schaffer’s disclosure about making the actuator and actuating members from machining pre-existing amounts of metals and/or plastics, and further explaining that flexible parts would deform and be difficult to machine through conventional techniques); Ex. 1005 ¶¶ 81–82. Mr. Thornton testifies that Schaffer’s disclosed manufacturing techniques for the actuator/actuating members are only examples and “a person of ordinary skill in the art could have simply purchased pre-made [and flexible] flat wire or plastic tapes or ribbons.” Ex. 1003 ¶ 79. Such testimony invokes, at best, obviousness-based reasoning. This does not establish that Schaffer alone describes a filament sufficient to anticipate the claims. Trintec Indus., Inc. v. Top-U.S.A. Corp., 295 F.3d 1292, 1296 (Fed.” slip op. at 27

  Patent outcomesUS 11,844,921 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,921
• Ajinomoto Co., Inc. v. Abtis Co., Ltd.No claims unpatentable
  PTAB · Aug 3, 2026 · IPR2025-00283 · APJ Lilan Ren · IPR · Final written decision

  The Board cancelled claim 11 and granted substitute claims 14–16, finding Petitioner had not shown those claims unpatentable on any asserted ground.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, grantedGranted

    “must determine whether the motion to amend meets the statutory and regulatory requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4. In that regard, Patent Owner bears the burden of persuasion to show that: (1) the amendment proposes a reasonable number of substitute claims; (2) the amendment responds to a ground of unpatentability involved in the trial; (3) the amendment does not seek to enlarge the scope of the claims of the patent or introduce new subject matter;” slip op. at 9

  • ExcludeMotion to exclude, deniedDenied

    “In this case, Patent Owner’s expert “Dr. Zhou signed the second declaration, stood behind its contents, and was available for cross-examination.” Paper 35, 4. Petitioner does not dispute this statement. Paper 39, 1. Petitioner does not identify any specific undue prejudice caused by Exhibit 2008. For example, Petitioner argues that “the failure to impress upon a witness that a statement is under oath goes to the heart of its reliability as evidence” and that “as the Board has recognized, hearsay is inherently unreliable” without specifying what statement in Exhibit 2008 lacks reliability. Paper 39, 4. Because Petitioner does not provide specific evidence of undue prejudice, we find Petitioner has suffered no such undue prejudice in this case. See Liquidia, 2021 WL 4860773 at *25. We therefore deny Petitioner’s Motion to Exclude on the basis of lack of authenticity. With regard to the assertion that Exhibit 2008 is hearsay, Petitioner objects to the exhibit because the testimony is based “on other informal and unpublished documents that are hearsay under FRE 802.” Paper 29, 1. Petitioner does not specify what such “informal and unpublished documents” are. See id. Federal Rule of Evidence 703 expressly states, “[a]n expert may base an opinion on fact or data in the case that the expert has been made aware of or personally observed.” The facts or data “need not be deny Petitioner’s Motion to Exclude on the basis of hearsay.” slip op. at 50

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateNot shown unpatentable

    “Petitioner’s argument is unpersuasive. Paragraph 59 of the ’503 application describes formula 8-1 but does not support Petitioner’s argument that other unknown formulas may be included in the recited modified heavy chains. Ex. 2003 ¶ 59. Petitioner’s hypothesis that the recited heavy chains may (or may not) encompass unknown formulas is also inapposite to the written description inquiry before us — that is, whether the inventor was in possession of the subject matter recited in claims 14–16 based on the disclosure including formulas 8-1, 8-2, and 8-3. See PowerOasis, 522 F.3d at 1306.” slip op. at 14

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)EnabledNot shown unpatentable

    “These arguments in the Sur-Reply are unpersuasive to show a lack of enablement first and foremost because the arguments do not specifically provide evidence showing that any purported experimentation is undue. See Sur-Reply 2–8 (asserting, but without providing evidence under any specific Wands factors, that the examples and guidance in the specification do not extend to the broad scope of all antibodies); see Wands, 858 F.2d at 737. We again emphasize that the analysis of undue experimentation does not necessarily require every Wands factor to be explicitly addressed but the analysis must be based on “weighing many factual considerations” depending on the nature of the invention and underlying art. Cephalon, Inc. v. Watson Pharms., Inc., 707 F.3d 1330, 1336 (Fed. Cir. 2013). The assertion that the claim scope is broad alone does not suffice to show a lack of enablement based on the record before us. Moreover, as we note supra, Petitioner’s claim scope argument is based on the false premise that the scope of claims 14–16 is as broad as the claim term “antibody” without taking into account all other claim elements. For example, Petitioner does not disagree with Patent Owner’s statement that “[t]he ’675 Patent’s specification discloses the structural modification site, the chemistry used to modify that residue, and working examples demonstrating the modification” (Reply 2), but asserts only that “[t]he disclosure of SSFI that only binds to IgG1 Fc domains (SEQ ID NO:1) is . . . . inconsistent with the expansive scope of the claims.” Sur-Reply 5. Petitioner’s argument that the claims encompass proteins that lack a lysine reside at a 248 position improperly excludes from the claim language the “lysine residue at 248 position . . . [as] determined by the EU numbering system” that claims 14–16 require. As Dr. Zhou testifies, “each proposed lysine residue at position 248 (EU numbering) is covalently modified with a specific attachment with a terminal bio-orthogonal click-chemistry functional group. The specification describes targeted transfer of a chemical functional group to lysine 248” and when claims 14–16 are considered in their entirety, which includes all claim elements, “[a] POSA would understand the claim itself to limit the modified antibodies to those with lysine at position 248.” Ex. 2004 ¶ 48; Ex. 2008 ¶ 47. We also note that Patent Owner states “a POSA would understand that the phrase ‘one or more modified heavy chain’ encompasses antibodies within typical DAR distributions (i.e., fractional numbers) rather than requiring a distinct process for producing antibodies bearing modified heavy chains in exact integers.” Reply 2–3. Moreover, Patent Owner states that PepTalk Presentation demonstrates that “a POSA would understand antibody conjugation products to exist as mixtures rather than discrete whole number species” because PepTalk Presentation “presents DAR values as non-integer measurements, i.e. DARs of 1.8 and 1.9 reflecting such distributions.” Id. at 3 (citing Ex. 1007, 28). According to Patent Owner, “preparations having an average DAR of approximately 1.8 (commonly referred to in practice as ‘DAR2’) may reflect typical reaction distributions in which some antibodies contain two modified heavy chains while others contain fewer.” Id. at 3 (citing Ex. 2008 ¶ 46). Petitioner does not rebut these statements. See Sur-Reply 2–8. Based on the foregoing, the evidence before us does not show any” slip op. at 27

  Patent outcomesUS 11,896,675 not shown unpatentable
  § 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 11,896,675
• Merck Sharp & Dohme LLC v. Halozyme, Inc.All claims unpatentable
  PTAB · Jun 24, 2026 · PGR2025-00009 · APJ Susan L C Mitchell · PGR · Final written decision

  Claims 1, 2, 6–14, and 16–29 are unpatentable based on written description, enablement, and obviousness grounds.

  RulingsFinal written decision

  • Director reviewDirector review, deniedDenied

    “Following institution, Patent Owner filed a Director Review Request (Paper 33), and Petitioner filed an Authorized Response (Paper 37), and the then-Acting Director issued a denial of the Director Review Request. Paper 40.” slip op. at 3

  • Additional discoveryAdditional discovery, deniedDenied

    “(Paper 46, “PO Resp.”), Petitioner filed a Reply to Patent Owner’s Response (Paper 71, “Pet. Reply”), and Patent Owner filed a Sur-reply (Paper 84, “PO Sur-reply”). Patent Owner filed a motion for additional discovery (Paper 62), Petitioner opposed the Motion for Discovery (Paper 63), and the Board denied the Motion for Discovery (Paper 77).” slip op. at 3

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “II. ANALYSIS A. Level of Ordinary Skill in the Art We consider the grounds of unpatentability in view of the” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “description itself. To the extent the experts disagree on this point, we credit the testimony of Petitioner’s experts over that of Patent Owner’s. For these reasons, we find that a preponderance of the evidence of record better supports a finding that in the 2011–2012 timeframe, it would have been unpredictable to identify which multiple mutants retained hyaluronidase activity, even with the single substitution data provided by the ’035 patent.” slip op. at 53

  Patent outcomesUS 12,123,035 unpatentable
  § 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 12,123,035
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00289 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–15 are unpatentable: claims 1–15 under Grounds 2 and 3, and claim 10 under Ground 4; Ground 1 did not establish unpatentability.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We have construed the “filament” term in multiple related proceedings and agreed with Patent Owner that the claimed filament requires flexibility. See Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. Specifically, we determined that the evidence supports Patent Owner’s position that “a POSA would have understood the plain and ordinary meaning of the claimed ‘filament’ as a flexible length of material (e.g., one or more string(s), wire(s), tape(s)).” See, e.g., Ex. 1050, 23. We maintain that construction in this Decision for the reasons given by Patent Owner (see PO Resp. 24–32; PO Sur-reply 6–8), we disagree with Petitioner’s argument to the contrary (Pet. Reply 27–31), and we incorporate our analysis concerning the meaning of the filament term from the related proceedings identified above, which applies equally here.13 Ex. 1050 (Final Written Decision in 156 IPR); IPR2024-01157, Paper 35 (Final Written Decision) at 15–24. The parties agreed at the oral hearing that there is no additional argument or evidence 13 Although the ’005 patent is not directly related to the patents at issue in the 1157 and 156 IPRs, the ’519 Application that the ’005 patent purports to incorporate for providing all relevant disclosures about the filament term is a parent application to the challenged patents in the 1157 and 156 IPRs (see supra n.3). SightSound Techs., LLC v. Apple Inc., 809 F.3d 1307, 1316 (Fed. Cir. 2015) (“Where multiple patents derive from the same parent application and share many common terms, we must interpret the claims consistently across all asserted patents.”) (internal quotation marks omitted). We also construed the filament term consistently in other ongoing proceedings on related patents. See, e.g., Ex. 1045 (Institution Decision in the 728 IPR), 12–18; Ex. 1046 (Institution Decision in the 989 IPR), 13–21. already addressed in those related matters. Tr. 6:13–23, 23:19–26.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends that the person of ordinary skill in the art (“POSA”) in August 2018 “would have had an undergraduate degree in mechanical engineering or a related engineering discipline and 2–4 years of catheter design experience.” Pet. 17 (citing Ex. 1003 ¶ 35). Although Patent Owner states that it “disagrees” with Petitioner’s POSA definition, Patent Owner nevertheless applies that definition in this case. PO Resp. 32–33; see Tr. 22:23–23:5 (Patent Owner is “not disputing” Petitioner’s definition, asserting the definition “doesn’t make any difference in this case”).” slip op. at 13

  • Expert testimonyPatent owner expert creditedPetitioner expert creditedMixed

    “We credit Dr. Zalesky’s interpretation of Schaffer on whether the POSA would have understood Schaffer as describing rigid actuating members. Dr. Zalesky testifies, for example, that a POSA would have understood from Schaffer’s disclosures about the actuating members being “machined” from metal or plastic, that such actuating members would be rigid. Ex. 2026 ¶ 101 (explaining “machining is a manufacturing process in which the desired part . . . is created using the controlled removal of bulk material” to produce a “rigid material”); Ex. 1005 ¶ 82 (“The actuating member 55 and the actuating button 261 is machined from aluminum” and “[i]n another example, the actuating member 55 and the actuating button 261 are machined from plastic”); Ex. 2026 ¶¶ 102–103 (testifying the disclosed valve assembly technique in Schaffer (Ex. 1005 ¶ 83) also indicates that “rigid” actuating members are used). Mr. Thornton opines (without citation to any persuasive supporting disclosure) that a POSA “would have understood that Schaffer’s U-shaped actuating members would have preferably been formed from a thin, flexible material.” Ex. 1003 ¶ 113. But, at deposition, Mr. Thornton conceded that machined plastics and aluminum, like disclosed in Schaffer, are rigid. Ex. 2005, 168:2–6 (“Q. And you said that plastic that would be machined would be rigid, correct? A. I think that’s a fair statement.”). Although Mr. Thornton opines that Schaffer’s actuating members would “preferably”” slip op. at 29

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableUnpatentableMixed

    “For the reasons above, Petitioner has not established that the claimed “filament” is disclosed in the combination of Garrison and Schaffer and, thus, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Garrison and Schaffer. Petitioner’s challenge to independent claim 10 (and the claims that depend from claim 1 and claim 10) fails for similar reasons. Each of the challenged claims requires a “filament” and, given our construction of that term and our findings above that Schaffer does not teach or suggest the claimed filament, Petitioner has not proved by a preponderance of the” slip op. at 31

  Patent outcomesUS 11,554,005 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,554,005
• Imperative Care, Inc. v. Inari Medical, Inc.All claims unpatentable
  PTAB · Jan 16, 2026 · IPR2024-01157 · APJ Timothy G Majors · IPR · Final written decision

  Claims 1–9 are unpatentable: the Board found them obvious over Schaffer with Hartley or Eller, though Schaffer alone did not anticipate and Hartley with Eller did not show claims 1–3, 5, 6, and 9.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “background for the POSA, but we agree with Patent Owner that Petitioner’s proposed POSA definition lacks some specificity concerning the POSA’s work experience. That definition, if interpreted generically, could mean that a person qualifies as a POSA if they had, for example, a B.S. in mechanical engineering and only two years of experience designing any type of product in any field. That is too broad. We find that a POSA would have had the agreed-upon educational credentials—an undergraduate degree in mechanical engineering or a related engineering discipline. Ex. 1003 ¶ 35; Ex. 2008 ¶ 68. We also find that a POSA would have had 2–4 years of design or engineering experience related to products in the field of the invention, which involves endovascular devices and the surgical procedures that use such devices. Ex. 1001, 1:21–57 (background of the invention). Such devices include, but are not necessarily limited to, hemostasis valves and catheters for minimally-invasive vascular surgeries. Id. And, consistent with the testimony of the parties’ experts, the POSA need not have had firsthand experience designing hemostasis valves. See, e.g., Ex. 1015 (Zalesky Tr.), 72:11–73:7 (testifying direct experience “designing”” slip op. at 13

  • Expert testimonyPetitioner expert creditedOther

    “Schaffer’s valve to include a single flexible string or wire that replaces the two U-shaped actuating members would have been seen by the POSA as potentially advantageous—giving further reason for the POSA to have made that change. Pet. 35–36. We credit Mr. Thornton’s testimony that a POSA would have understood that Schaffer’s U-shaped actuating members may into the lumen. Ex. 1003 ¶ 81. On the other hand, a POSA would have recognized that a single flexible string or wire that is looped completely around the exterior of the seal module/lumen would provide more uniform constriction and compression around the outer diameter of some commonlyused tools and including tools with diverse shapes and sizes. Ex. 1003 ¶¶ 80–88, 93–100. We observed this same reason for modifying the art at institution and, after considering the full trial record, our view has not changed. Inst. Dec. 37 (preliminarily finding that a POSA would have considered Hartley’s string or Eller’s wire “as providing expected benefits insofar as such a filament may more precisely and uniformly constrict a lumen against inserted tools of different sizes and shapes”). Patent Owner’s expert, Dr. Zalesky, does not disagree that a flexible string or wire would have carried this advantage. Ex. 2008 ¶ 75 (testifying a “filament changes shape dynamically, allowing for better adaptability to the contours of the valve lumen as it is constricted”);21 Ex. 1015 (Zalesky Tr.), 86:19–87:4 (testifying that POSAs in 2017 would have recognized that the “cinching” effect provided by a filament would have been more effective for large-bore catheters based on “simple mechanical engineering and physics”). And, at the oral hearing, Patent Owner agreed that using Hartley’s string in Schaffer would help eliminate potential fluid gaps; but Patent Owner qualified its answer that such a benefit would allegedly only have arisen if “the highly-compliant” seal member material in Schaffer was removed,” slip op. at 53

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “that issue, after considering the full record developed through trial, we agree with Patent Owner that a “filament” as claimed is flexible. On balance, the evidence supports Patent Owner’s interpretation. Patent Owner cites the claim language, including the recitation that “the filament circumferentially constricts the lumen to create a seal,” which Dr. Zalesky opines a POSA would have understood as implying a flexible structure. PO Resp. 25–26; Ex. 2008 ¶¶ 71–76 (testifying, inter alia, that “[t]o ‘circumferentially constrict,’ the filament must be flexible and extend circumferentially about the lumen” such that “the filament will adapt to the shape of the lumen as the lumen is constricted and thus ‘circumferentially constrict’ the lumen as recited in Claim 1”).12 The Specification also describes the filament as being selectively “tightened” and “loosened” about the elongate member. Ex. 1001, 9:37–40, 9:55–59 (teaching “the filament 150 is tightened” when the actuator is released and “the filament 150 is loosened” when the actuator is pressed to open the valve)). Dr. Zalesky opines that a POSA would have understood the patent’s description of” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “challenge fails on this record whether the clearer prosecution drawings in Exhibit 1008 are considered in the analysis of anticipation by Schaffer, or not. Whether those prosecution drawings are considered “extrinsic evidence” to Schaffer (as argued by Patent Owner) or publicly-available “intrinsic evidence” with respect to Schaffer (as Petitioner argues) does not change our Decision on Ground 1. Opp. 10–11; Mot. Reply, 3–5. Patent Owner’s motion is, therefore, moot as to Ground 1.” slip op. at 72

  Patent outcomesUS 11,697,011 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,697,011
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Oct 7, 2025 · IPR2024-01462 · APJ Jo-Anne M Kokoski · IPR · Rehearing

  The Board denied Solus’s rehearing request, leaving institution denied for claims 1–8 because the petition did not adequately show motivation to combine Hanafusa and Dobashi.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “In particular, neither Petitioner nor Dr. Josefowicz adequately explain why a POSITA looking for ways to make Hanafusa’s surface roughness low-profile would look to methods to achieve Dobashi’s RSm values. Dobashi teaches that because RSm “can be adopted as the period of waviness, RSm can also be used as an indicator for judgment of the surface.” Ex. 1005, 2:66–3:1, 6:23–26. Dobashi explains that waviness is “an indicator for determining whether the fine pattern forming performance is good or bad,” and “[t]he surface has small waviness and is smooth when RSm is large, and the surface has large waviness Dobashi also teaches that surface roughness Rzjis is used as a low-profile indicator. Ex. 1005, 2:66–3:1. Dobashi, therefore, teaches that RSm is an indicator of surface waviness, which Dobashi explains is different than surface roughness. Id. at 2:66– 3:3, 6:23–29. Given these teachings in Dobashi, neither Petitioner nor Dr. Josefowicz sufficiently explains how or why a POSITA would have been motivated to implement Dobashi’s RSm values to make Hanafusa’s surface roughness low-profile. See Pet. 10–12; Ex. 1003 ¶¶ 46–52.” slip op. at 4

  § 103 obviousness
  Patents in suitUS 11,346,014
• Solus Advanced Materials Co., Ltd. v. SK Nexilis Co., Ltd.Rehearing denied
  PTAB · Oct 7, 2025 · IPR2024-01461 · APJ Jo-Anne M Kokoski · IPR · Rehearing

  The Board denied rehearing and left in place its denial of institution because Petitioner did not show that claims 1–10 were likely obvious over the asserted combinations.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “II. STANDARD OF REVIEW When rehearing a decision on institution, we do not review the merits of the decision de novo, but instead review the decision for an abuse of discretion. 37 C.F.R. § 42.71(c). An abuse of discretion may be determined “if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors.” Arnold Partnership v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004) (citing In re 1 US 2013/0108922 A1, published May 2, 2013 (Ex. 1004, “Shinozaki”). 2 G. Khatibi, Temperature Dependent Elastic and Thermal Properties of Thin Copper Foils, Copper; Proceedings of the International Conference Copper ’06 (2006) (Ex. 1006, “Khatibi”). 3 Korean Patent Pub. No. 10-2012-0003485, published Jan. 10, 2012 (Ex. 1013; Ex. 1014 (English translation), “Toshio”). 4 US 2013/0108887 A1, published May 2, 2013 (Ex. 1012, “Kim”). 5 Griesi, M.B., Characterization of Electrodeposited Copper Foil Surface Roughness for Accurate Conductor Power Loss Modeling (2014) (Master’s Thesis, University of South Carolina) (Ex. 1015, “Griesi”). rehearing has the burden to show that the decision should be modified. 37 C.F.R. § 42.71(d). Additionally, the request for rehearing “must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed in a motion, an opposition, or a reply.” Id.” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Not shown unpatentable

    “For example, Dr. Randall does not provide adequate explanation or objective evidence to support his opinion that Khatibi’s use of a laser speckle based dilatometer instead of the claimed thermomechanical analyzer “is unlikely to significantly impact the CTE[6] value” because “variations in equipment and a heating speed of 5° C/min would not significantly alter the results.” Ex. 1003 ¶ 58. In particular, Dr. Randall neither explains what constitutes a “significant” impact on CTE, nor provides objective evidence to support his contention that equipment variations and heating differences would not “significantly alter” the resulting measurements. And although Dr. Randall opines that “the heating rate (5°C per minute) is typical for certain devices” such as a thermomechanical analyzer or dilatometer, and “[t]ypically, these devices use temperature ramp rates between 2°C and 20°C per minutes, so the ‘5° C./min’ recited in [1d] is common and should not drastically affect the measurement results,” Dr. Randall fails to point us to any evidence showing that these temperatures are “typical” or that the claimed heating rate is “common.” Id. ¶ 59 (emphases added).” slip op. at 4

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Petitioner, however, does not adequately explain why a POSITA would have been motivated to modify Kim’s copper foil surface to have a Pc value of 19.2 as reported in Griesi. In particular, neither Petitioner nor Dr. Randall points us to, nor do we discern, any teaching in Griesi that a peak count of 19.2 provides any particular benefits or properties that would have lead a POSITA to modify Kim’s copper foil surface as Petitioner proposes. Instead, Petitioner’s arguments that a POSITA would have been motivated to modify Kim’s copper foil surface with Griesi’s peak count patent itself. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 421 (2007) (stating that the fact finder must be aware “of the distortion caused by hindsight bias and must be cautious of arguments reliant upon ex post reasoning”). It was Petitioner’s burden to establish that the combined teachings Kim and Griesi disclose limitation [1g] as proposed. We are not persuaded that we misapprehended Petitioner’s argument when we determined that Petitioner did not meet that burden.” slip op. at 8

  • BurdenDecided for patent owner

    “It was Petitioner’s burden to establish the Khatibi, alone or in combination with Shinozaki, Toshio, and Kim, discloses limitation [1d]. We concluded that Petitioner failed to meet that burden for the reasons explained in our Decision. We are not persuaded that we overlooked or misapprehended Khatibi’s disclosures, or Petitioner’s evidence and explanation thereof, in doing so.7” slip op. at 5

  § 103 obviousnesscites KSR
  Patents in suitUS 10,811,689
• Solus Advanced Materials Co, Ltd. v. SK Nexilis Co., Ltd.Institution denied
  PTAB · Apr 22, 2025 · IPR2024-01460 · APJ Jon B Tornquist · IPR · Institution

  The Board denied institution of review of claims 1–11 because the Fintiv factors, including the early trial date and close merits case, favored discretionary denial.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied fintivInstitution denied

    “whether to institute an inter partes review. Applying the standard set forth in 35 U.S.C. § 314(a), we may not institute an inter partes review unless the information presented in the petition “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Institution of inter partes review, however, is discretionary. See Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1367 (Fed. Cir. 2016) (“[T]he PTO is permitted, but never compelled, to institute an IPR proceeding.”). For the reasons stated below, we exercise our discretion not to institute an inter partes review. A. Real Parties-in-Interest” slip op. at 2

  • PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Institution denied fintivDenied

    “Board’s projected statutory deadline to issue a final written decision. Fintiv, Paper 11 at 9. “If the court’s trial date is at or around the same time as the projected statutory deadline . . . the decision whether to institute will likely implicate other factors.” Id. Conversely, “[i]f the court’s trial date is earlier than the projected statutory deadline,” this has generally weighed “in favor of exercising authority to deny institution.” Id.” slip op. at 15

  • PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsNot reached

    “Petition under 35 U.S.C. § 325(d) because the same or substantially the same art and arguments were before the Examiner during prosecution and Petitioner’s has not demonstrated that the Examiner erred in a material manner when allowing the claims. Pet. 17–18. Given our discretionary denial of the Petition in view of the Fintiv factors, we do not address Petitioner’s further arguments with respect to § 325(d).” slip op. at 32

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner applies Petitioner’s recited level of ordinary skill in the art for purposes of its Preliminary Response. Prelim. Resp. 4. Upon review of the parties’ arguments and the prior art of record, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan for purposes of this decision as it appears consistent with the disclosures of the ’090 patent and the prior art of record. C. Claim Construction” slip op. at 9

  § 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 10,480,090
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.

  RulingsFinal written decision

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

    “During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13

  • ExcludeDenied

    “III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47

  Patent outcomesUS 8,404,508 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,404,508
• Omega Liner Company, Inc. v. Buergofol GmbHAll claims unpatentable
  PTAB · Mar 14, 2025 · IPR2023-01372 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1, 3–7, and 10–13 are unpatentable as obvious over Hummel and Schuhmann or Hummel and Nagai; anticipation by Hummel alone was not shown.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner, in the Petition, proposes that a person of ordinary skill in the art “would have at least a bachelor’s degree in Polymer Science and Engineering, Material Science and Engineering, or a related engineering field, combined with at least three years of experience in the formulation, manufacturing, and end-use performance of polymeric film and sheet products.” Pet. 3 (citing Ex. 1003 ¶ 23). Petitioner further states that “[a]lternatively, one skilled in the art could be a person with at least seven years of experience in the formulation, manufacturing, and end-use performance of polymeric film and sheet products, without possessing a bachelor’s degree in a related scientific or engineering discipline.” Id. In the Response, Patent Owner states that it “adopts Petitioner’s description of” the hypothetical person of ordinary skill in the art. Resp. 11 (citing Ex. 2001 ¶ 11). We apply Petitioner’s unopposed definition because it is consistent with disclosures in the ’882 patent, the asserted prior art, and the declaration testimony of Dr. MacLean. See Ex. 1001, code (57) (Abstract), 1:10–2:49 (background of the claimed invention); Ex. 1005, code (57) (Abstract), 1 (description of field and background of Hummel’s” slip op. at 9

  • ExcludeMotion to exclude, deniedDenied

    “The Board regularly denies as moot motions to exclude evidence that is not relied upon in a final written decision. See, e.g., Foursquare Labs, Inc., v. BoardActive Corp., IPR2023-00919, Paper 29 at 84 (PTAB Nov. 27, 2024); Neurocrine Biosciences, Inc., v. Spruce Biosciences, Inc., PGR2021- 00088, Paper 64 at 12, 20, 21, 23 (PTAB Nov. 26, 2024). Patent Owner does not persuade us that a deviation from this general practice is warranted in this case––the reason given by Patent Owner, involving concerns stemming from appellate review, would apply to all cases. We do not rely on Exhibit 1047–1049, 1051, 1060, 1061, 1070, or 1071 in this decision, therefore, we deny Patent Owner’s Motion to Exclude as moot. B. Petitioner’s Motion to Exclude Exhibit 2001 (Paper 52) Petitioner moves to exclude paragraphs 13–25, 29–40, 42–43, 48–49, 56–61, and 66–75 of Exhibit 2001, which is the declaration of Dr. Brant. Paper 52. In Petitioner’s view, Dr. Brant’s “declaration is replete with inadmissible hearsay, improper legal conclusions, and testimony unsupported by reliable methods or personal knowledge.” Id. at 1. made available for cross-examination pursuant to routine discovery in our forum. Petitioner’s objections otherwise go primarily to the weight that should be accorded to Dr. Brant’s testimony, without raising any persuasive arguments for its exclusion. See generally id. (Petitioner’s arguments). Accordingly, we deny Petitioner’s Motion to Exclude Exhibit 2001. C. Petitioner’s Motion to Exclude Exhibit 2003 (Paper 53) Petitioner moves to exclude certain paragraphs of Exhibit 2003, which is the declaration of Dr. Schleicher, a named co-inventor of the ’882 patent. Paper 53. We do not rely on Dr. Schleicher’s declaration in this decision. Accordingly, we deny Petitioner’s Motion to Exclude Exhibit 2003 as moot. D. Petitioner’s Motion to Exclude Exhibit 2004 (Paper 54) Petitioner moves to exclude paragraphs 6–59 of Exhibit 2004, which is the declaration of Dr. Boutrid, another named co-inventor of the ’882 patent. Paper 54. In Petitioner’s view, Dr. Boutrid’s declaration “is riddled with inadmissible evidence, including hearsay, double hearsay, and testimony lacking personal knowledge. Much of the declaration relies on out-of-court statements from unidentified customers and unidentified UV-curable resin manufacturers, none of whom are identified or made available for examination.” Id. at 1. Much of the testimony about which Petitioner’s objects pertains to customer complaints about Patent Owner’s products, and whether maleic anhydride was included in the curable resin used by the customers, which form no part of this decision. See, e.g., id. at 4–7. We can take account of Petitioner’s objections, including Petitioner’s view that parts of Dr. Boutrid’s testimony are based on impermissible hearsay and unsound the record for appeal. Accordingly, we deny Petitioner’s Motion to Exclude Exhibit 2004.” slip op. at 51

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner relies on a list of optional additives set forth in Hummel––a list that Hummel provides without any guidance as to why any particular additive would have been selected to serve any purpose, specifically in relation to the relevant layer (e). See Ex. 1005, 11:18–26 (relevant disclosure in Hummel). In other words, Hummel’s disclosure does not teach, with anticipatory specificity, a multilayer film in which a migrating compound is selected specifically for addition to layer (e). Although the lack of a specific example is not necessarily fatal to this anticipation ground, we cannot properly find that Hummel anticipates claim 1 absent some disclosure that “clearly and unequivocally” teaches the claimed subject matter “or direct[s] those skilled in the art to the” claimed” slip op. at 29

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “These are attorney arguments, unsupported by evidence, except for a single citation to Schuhmann’s “sticky” products. Id. (citing Ex. 1007, 17). Because that sole citation to evidence is inadequate to support Patent Owner’s arguments about the understanding of an ordinarily skilled artisan, we agree with Petitioner that these conclusory arguments are “baselessly” advanced by Patent Owner. Reply 3. the particular problem with which the inventor is involved.” In re Clay, 966 F.2d 656, 659 (Fed. Cir. 1992). Schuhmann’s release films are “reasonably pertinent” to a problem addressed in the ’882 patent, namely, providing a “release effect against adhesive substances such as resins.” Ex. 1001, 2:56– 57. So too is Hummel, which relates to removal of an inner tubular layer, “after the resin has cured,” without “tearing or seizing” during the process of removal. Ex. 1005, 7, 23. On this record, an ordinarily skilled artisan would have been aware of both references and would have taken account of their combined disclosures.” slip op. at 37

  Patent outcomesUS 9,657,882 unpatentable
  § 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,657,882

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.