• Yealink (USA) Network Technology Co., Ltd. / Yealink Network Technology Co., Ltd. v. Barco NVNo claims unpatentable
  PTAB · Oct 5, 2026 · IPR2025-00598 · APJ David C Mckone · IPR · Final written decision

  Claims 1–31 were not shown unpatentable under either § 103 ground because the asserted combinations did not teach required claim limitations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedOther

    “admissions by Patent Owner in litigation, contends that a person of ordinary skill in the art would have had “a Master of Science (M.S.) degree in electrical engineering or computer science, and five years of work experience in a related field” and that “[a]dditional educational experience could substitute for some of the work experience.” Pet. 5 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art (Petition, 5) at this time.” PO Resp. 6. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is uncontested and is consistent with the technology described in the ’347 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “In the Preliminary Response, “Patent Owner accept[ed] the Petition’s claim construction.” Prelim. Resp. 6. However, in the Patent Owner Response, Patent Owner argues that “the claims of the ’347 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Based on the complete record, we do not find it necessary to provide express claim constructions of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Beel actually discloses the following: [0321] On the peripheral device 32 the video packets are received at the corresponding plug and play port, e.g. the USB port 11, read by the Human Interface Driver (HID) interface handler 13, unpacked to remove HID protocol headers in an unpacker 20 and then transmitted to the communications network by a transmitter 21. The network can be wireless for example WiFi or LiFi network. [0322] Having been routed over a communications network to the base unit 33, the incoming stream is read from the communications interface such as a WiFi access point 22, unpacked in an unpacker 25, decoded in a decoder 26 and then inserted into a suitable composition such as an OpenGL based composition in the compositor 29 for display on a central display device. Ex. 1005 ¶¶ 321–322 (emphasis added to portions quoted by Petitioner). Patent Owner notes that “[t]he Petition mistakenly cites to ¶ 322 of Beel but quotes ¶ 321.” PO Resp. 20 n.3. However, it appears that Petitioner has grafted together a portion of paragraph 321 that introduces peripheral device 32 with a portion of paragraph 322, which discusses features of base unit 33. However, this grafting has been done in such a way as to convey (incorrectly) that peripheral device 32, not base unit 33, includes unpacker 25, decoder 26, and compositor 29 that process the first processed video data received by the first peripheral device to generate second video data. Dr. Almeroth’s testimony, which copies Petitioner’s incorrectly altered quotation to paragraph 322 of Beel, is unreliable as to this claim limitation and is entitled to no weight.4 Thus, Petitioner has no expert testimony on which to rely for this claim limitation.” slip op. at 19

  • Strike new argumentNew argument disregardedDecided for patent owner

    “5 At the oral argument, when challenged on its reliance on paragraph 322, Petitioner argued that paragraph 321 of Beel teaches this limitation. Tr. 22:26–23:24. Petitioner did not make this argument in the Petition and, instead, raised it for the first time during oral argument; thus, it will not be considered. See Dell Inc. v. Acceleron, LLC, 884 F.3d 1364, 1369 (Fed. Cir. 2018) (“Unless it chose to exercise its waiver authority under 37 C.F.R. § 42.5(b), the Board was obligated to dismiss Dell’s untimely argument given that the untimely argument in this case was raised for the first time during oral argument.”). Even if we were to consider this new argument, it would not be persuasive. As Patent Owner observes (PO Resp. 20), any processing performed by peripheral device 32 in paragraph 321 is on data received from the processing device and destined for the base station via the network, rather than data flowing in the direction of the first processed video data of claim 1.” slip op. at 22

  Patent outcomesUS 11,966,347 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,966,347
• Inari Agriculture, Inc. v. Corteva Agriscience LLCNo claims unpatentable
  PTAB · Nov 18, 2025 · IPR2024-01014 · APJ Zhenyu Yang · IPR · Final written decision

  Petitioner did not show claims 1–8 unpatentable because they are entitled to the 2004 priority date, making Barbour unavailable as prior art.

  RulingsFinal written decision

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Entitled to earlier dateDecided for patent owner

    “For a claim to a biological material, the enablement requirement of § 112, first paragraph, does not require such assured access to a microorganism deposit as of the filing date; what is required is assurance of access (to the microorganism culture by the public upon issuance of a patent on the application) prior to or during the pendency of the application, so that, upon issuance of a U. S. patent on the application, the public will, in fact, receive something in return for the patent grant. Feldman, 517 F.2d at 1355. Patent Owner has persuaded us that such exception not only applies to a deposit, but also extends to a biological material known and readily available. See 52 Fed. Reg. 34080, 34081. In this case, it is undisputed that TC1507 germplasm was known and readily available to the public by Barbour’s publication date in 2006 (Pet. 49–53), years before the 2014 issuance date of the ’378 patent (Ex. 1001, code 45). Thus, based on the record developed through trial, we agree with Patent Owner that the 2004 application satisfies the enablement requirement as of its application date in 2004. PO Resp. 16–18 (citing 52 Fed. Reg. 34080, 34081). As a result, the challenged claims are entitled to the 2004 priority date and, thus, Barbour does not qualify as prior art.” slip op. at 15

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for patent owner

    “In this case, it is undisputed that TC1507 germplasm was known and readily available to the public by Barbour’s publication date in 2006 (Pet. 49–53), years before the 2014 issuance date of the ’378 patent (Ex. 1001, code 45). Thus, based on the record developed through trial, we agree with Patent Owner that the 2004 application satisfies the enablement requirement as of its application date in 2004. PO Resp. 16–18 (citing 52 Fed. Reg. 34080, 34081). As a result, the challenged claims are entitled to the 2004 priority date and, thus, Barbour does not qualify as prior art. Because all of Petitioner’s challenges rely on Barbour (Pet. 6), all those challenges fail.” slip op. at 15

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artNot shown unpatentable

    “In this case, it is undisputed that TC1507 germplasm was known and readily available to the public by Barbour’s publication date in 2006 (Pet. 49–53), years before the 2014 issuance date of the ’378 patent (Ex. 1001, code 45). Thus, based on the record developed through trial, we agree with Patent Owner that the 2004 application satisfies the enablement requirement as of its application date in 2004. PO Resp. 16–18 (citing 52 Fed. Reg. 34080, 34081). As a result, the challenged claims are entitled to the 2004 priority date and, thus, Barbour does not qualify as prior art. Because all of Petitioner’s challenges rely on Barbour (Pet. 6), all those challenges fail.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “would understand that the term “‘flanked by’ permits overlap between the expression cassette and the DNA sequence it is flanked by.” Pet. 24–26. Patent Owner does not propose any claim construction. PO Resp. 6–7. On this record and for purposes of this Decision, we see no need to expressly construe any claim term.” slip op. at 9

  Patent outcomesUS 8,901,378 not shown unpatentable
  Claim construction§ 102 anticipation§ 112 disclosurecites Phillips
  Patents in suitUS 8,901,378
• CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentable
  PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

  Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

    “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

  Patent outcomesUS 10,647,861 not shown unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 10,647,861
• BTL Industries, Inc. v. Inmode Ltd.No claims unpatentable
  PTAB · Oct 1, 2025 · IPR2024-00703 · APJ Meredith C Petravick · IPR · Final written decision

  Claims 1–58 were not shown unpatentable: the Edwards, Ingle, and Mosher combination fails to establish key limitations, and Ollivier was not shown to be a prior art printed publication.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We apply Patent Owner’s proposed definition, as it appears consistent with the field of the ’511 patent and the prior art and is consistent with testimony of Dr. Poulos and the cross-examination testimony of Dr. Berenholz. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself); Ex. 2001 ¶¶ 35–39; Ex. 2005, 55:5–17, 57:17–58:19. In our view, however, Petitioner’s proposed definition is not so different that our decision would change if we were to apply Petitioner’s proposed definition.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Patent Owner’s argument are persuasive. We agree with Patent Owner that a plain reading of the wherein clause requires the treating to begin at the introitus and extend at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. This construction is consistent with the ’511 patent’s Specification, which states: In typical embodiments, the length of the energy delivery element is about 1 to about 3 cm in length, in other embodiments it may be as long as about 4 cm. This is a length well adapted to treating the lower aspects of the vagina, wherein treatment by the method comprises contacting the vaginal epithelium in a region that extends from the introitus inward to a position about 3 to 4 cm inward from the introitus. In some embodiments of the invention, the method can b[e] practiced with a single row of parallel contract sites immediately inside the introitus. In other embodiments, the method may include deeper rows, or rows that overlap an initial row, while keeping the contact sites within the lower portion of the vagina. Ex. 1001, 3:28–40 (emphasis added); see also id. at 14:47–57. The ’511 patent Specification also states: “the portion of the vagina to be treated is a region between the introitus and a position located no further than about 3 to about 4 cm inward from the introitus.” Id. at 11:48–51 (emphasis added). Given the plain language of claim 1, consistent with the ’511 patent’s Specification, we construe “heating a portion of the vagina extending from the introitus inwardly to a location from 1 cm to 3.5 cm in from the introitus” to require heating a portion of the vagina beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus.” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Patent Owner’s arguments is persuasive. The cited portion of Mosher does not explicitly state the location of the treatment area. Ex. 1006 ¶ 74. In it Reply, Petitioner additionally points to paragraph 54 of Mosher, which states: “Preferably, the location of the treatment volume of endopelvic fascia will be disposed along a length of the urethra between the bladder neck and the external meatus so as to avoid injuring nerves.” Pet. Reply 14 (quoting Ex. 1006 ¶ 54). Petitioner argues that “[t]reating the vaginal wall adjacent to the mid-urethral region is within the claimed region of ‘from 1 cm to 3.5 cm in from the introitus.’” Pet. Reply 14–16. This, however, does not teach the claimed area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. The Petition fails to show that either Edwards or Mosher discloses heating a portion of the vagina beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. In its Reply, Petitioner argues that it would have been obvious to modify Edwards to treat the area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. See, e.g., Pet. Reply 2–4, 16–17 (citing Pet. 35). The Petition’s argument is unpersuasive because it is conclusory and does not adequately address Edwards’s use of a speculum. Pet. 35. The Petition includes no” slip op. at 26

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “In its Reply, Petitioner argues that it would have been obvious to modify Edwards to treat the area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. See, e.g., Pet. Reply 2–4, 16–17 (citing Pet. 35). The Petition’s argument is unpersuasive because it is conclusory and does not adequately address Edwards’s use of a speculum. Pet. 35. The Petition includes no persuasive explanation as to why it would have been obvious to modify Edwards to use the treatment blade without the speculum. See Pet. 22–24, 35–36. We determine that Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 1 is unpatentable over Edwards, Ingle, and Mosher.” slip op. at 26

  Patent outcomesUS 8,961,511 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,961,511
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 25, 2025 · IPR2023-01382 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–3 were not shown unpatentable under any of five § 103 grounds because Petitioner failed to establish sufficient motivation to modify or combine the prior art.

  RulingsFinal written decision

  • BurdenNot shown unpatentable

    “A petition must identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim.” 35 U.S.C. § 312(a)(3) Here, Petitioner merely provides general assertions about multiple references, without clearly identifying how, or why a POSITA would have been motivated, to modify the processes disclosed in those references to arrive at the claimed invention. Thus, the Petition does not state with particularity that Saxler’s particular technique for etching is to be used instead of Beach’s etching step when substituting Beach’s self-aligned process for Saxler’s two mask process. Nor does the Petitioner provide a sufficient reason, absent hindsight, why a POSITA would have been motivated to combine the references to result in a process that forms Saxler’s Modified Figure 1A. Thus, for these additional reasons, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Saxler, Beach, and Shenoy.” slip op. at 34

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Both parties agree that the differences between the definitions do not impact the analysis. Resp. 11; Reply 2. In light of the record before us, and for purposes of this Decision, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’347 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand and implement the teachings of the ’347 patent and the prior art. We also note that our Decision would be the same under either parties’ definition.” slip op. at 13

  • Expert testimonyOther

    “Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “remove the recess in Saxler Figure 1A to arrive at the allegedly enhancement mode transistor of Modified Figure 1A. Contrary to Petitioner’s assertions in its Reply and at the hearing, the Petition makes no argument that a POSITA would have removed the recess from Saxler Figure 1A to realize the benefits of an enhancement mode transistor. See Reply 4–5; Pet. 24–68. Rather, the Petition merely asserts that a POSITA would have understood that the gate recess of Figure 1A is optional without providing any persuasive reason why a POSITA would have removed the gate recess but retained the sloped sidewalls of Figure 1A. Pet. 25, 40, 45. For example, Petitioner asserts that Saxler’s gate contact may be “recessed or non-recessed” and that when the gate recess shown in Figure 1A is not utilized, Saxler would have the structure of Saxler Modified Figure 1A. Pet. 25 (citing Ex. 1003 ¶ 81; Ex. 1007 ¶ 52, 66); see also Pet. 40, 45 (citing Ex. 1007 ¶ 52). Neither of these paragraphs provide sufficient motivation to a POSITA to remove the gate recess from Saxler Figure 1A. Saxler paragraph 52 states: Exemplary devices according to some embodiments of the present invention are schematically illustrated in FIGS. 1A through 6. Thus, while embodiments of the present invention are described herein with reference to a recessed gate structure or a non-recessed gate structure, other embodiments of the present invention may include or not include a gate recess. Accordingly, embodiments of the present invention should not be construed as limited to the particular exemplary embodiments described herein but may include any suitable structure having a cap layer and/or passivation layer as described herein. Ex. 1007 ¶ 52. Petitioner’s expert, Dr. Shealy states that he understands paragraph 52 to mean that it is “fair game to pull the recess out of any of those figures [Figures 1A through 6].” Ex. 2004, 39:12–21. Dr. Shealy, however, also clarifies that “[a]s I said before, I think you could take all the embodiments and bring in which ones you want, depending on what you’re trying to accomplish.” Ex. 2004, 40:24–41:1. During the hearing, Petitioner admitted that Dr. Shealy’s “statement to modify the reference depending on what you're trying to accomplish” means that “a POSITA may modify with reason to do so. A POSITA would have removed Saxler’s recess to obtain the benefits of enhancement-mode.” Tr. 19:19–25. Again, the Petition does not provide a reason why a POSITA would have removed Saxler’s gate recess.” slip op. at 28

  Patent outcomesUS 9,748,347 not shown unpatentable
  § 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,748,347
• Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationNo claims unpatentable
  PTAB · Mar 18, 2025 · IPR2023-01383 · APJ Kimberly Mcgraw · IPR · Final written decision

  Claims 1–5 were not shown unpatentable because Petitioner did not sufficiently establish a reason to modify the asserted prior art.

  RulingsFinal written decision

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We disagree with Petitioner’s argument because it fails to address Dr. Schubert’s academic and other experience with GaN transistors. Dr. Schubert is currently a tenured full professor in the Department of Electrical Computer, and Systems Engineering at Rensselaer Polytechnic Institute and was previously a tenured full professor in the Department of Electrical and Computer Engineering at Boston University. Ex. 2001, 129. Additionally, Dr. Schubert was the director of Boston University’s Semiconductor Devices Research Laboratory. Ex. 2001, 129. Dr. Schubert persuasively explains that his general expertise is in the field of electrical engineering and applied physics, including semiconductors, processing, and devices and his specific expertise is in the field of semiconductor materials (such as GaN), semiconductor devices, semiconductor integrated circuits, ohmic contacts, Schottky contacts, HEMTs, and optoelectronic devices such as light-emitting diodes (LEDs). Ex. 2001 ¶ 11, App’x A pp.129–137. His experience includes “the design, growth, fabrication, and testing of semiconductor devices as well as the employment of these devices in a variety of applications” and he is “familiar with both the design of such transistors [HEMTs] and the manufacturing processes used for FETs. Ex. 2001 ¶ 11, App’x A, pp. 129–137. He is an author or co-author of numerous text books and articles, and co-inventor of numerous patents, including those dealing with HEMT transistors and GaN devices. Ex. 2001 ¶ 13, App’x A, pp. 129–137. Petitioner fails to present any persuasive argument or evidence that Dr. Schubert’s extensive education and experience regarding GaN transistors is insufficient or lacking such that his testimony should be given little weight. Finally, we disagree with Petitioner’s additional argument that that its expert’s testimony (Dr. Shealy) should be given more weight than Patent Owner’s expert’s testimony (Dr. Schubert) because “[u]nlike Dr. Schubert, Dr. Shealy is one of the pioneer scientists in the field of GaN transistors.” Reply 34 (stating that Dr. Shealy’s research lab built the first GaN HEMT device on silicon in 1999 and citing Ex. 2002, 87:19–238). Obviousness is determined through the lens of a “person of ordinary skill in the art,” not through the lens of a person with extraordinary skill or a pioneer in the field. Given Dr. Schubert’s extensive relevant education and experience, Petitioner does not persuasively explain why Dr. Shealy’s testimony on any specific topic, or his testimony in general, should be given more weight than Dr. Schubert’s.” slip op. at 16

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “understanding of a person of ordinary skill in the art (sometimes abbreviated herein as “POSITA”). Graham, , 383 U.S. at 17–18. Petitioner argued that a person of ordinary skill in the art would have had a “at least a four-year degree in electrical engineering, chemical engineering, physics, or material science or a closely related field and at least two years of experience in semiconductor device design or fabrication, including the processing of semiconductor materials, analysis of device operation, or the development of new device topologies. Additional education could substitute for professional experience and vice versa.” Pet. 11 (citing Ex 1003 ¶ 69). Patent Owner did not dispute this proposed definition prior to institution. See generally Prelim. Resp. In our Decision on Institution, we adopted Petitioner’s proposal. After institution, Patent Owner asserted a slightly different definition of a POSITA, namely someone who “would have possessed at least a four-year degree in electrical engineering, physics, material science, or a closely related field, and three years of professional work experience in the epitaxial growth, design, and fabrication of semiconductor electronic devices, including those of GaN.” Resp. 17. Relevant graduate education could substitute for the professional work experience. Id. Upon review of the full record, we see no reason to modify, and we thus maintain, the definition of a POSITA applied in our Decision on Institution. We also determine that our decision would be the same under either of the parties’ proposed definitions.” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Not reached

    “During the proceeding, the parties also dispute the proper construction of “etching away the doped GaN layer, except a portion of the doped GaN layer beneath the gate contact” as recited in step [1e4] and provided briefing on this issue. Papers 35, 36, 37, 38. Because, as explained below, our determination rests upon Petitioner’s failure to show a sufficient reason to modify the asserted art, which is not dependent upon any particular claim construction, we need not, and do not, address these claim construction issues. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy).” slip op. at 13

  • ExcludeDenied

    “III. PETITIONER’S MOTION TO EXCLUDE EXHIBIT 2008 Petitioner filed a Motion to Exclude (Paper 25, “Mot.”) Exhibit 2008, which is a hearing transcript from the parallel ITC investigation. Mot. 1. Because we do not rely upon Exhibit 2008 in our Decision, we dismiss Petitioner’s motion as moot.” slip op. at 47

  Patent outcomesUS 8,404,508 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,404,508
• Hesai Technology Co., Ltd. v. Ouster, Inc.No claims unpatentable
  PTAB · Mar 13, 2025 · IPR2023-01422 · APJ Jon M Jurgovan · IPR · Final written decision

  The Board held claims 1–2, 4–9, 11–14, 16–17, and 19–25 not shown unpatentable over the asserted obviousness grounds, principally because the combinations lacked claimed limitations.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “Considering the applicable factors in light of the parties’ contentions, we adopt the following level of ordinary skill in the art, which we apply in this Decision: A person of ordinary skill in the art would have had an undergraduate degree in mechanical or electrical engineering and two to three years of work experience with electro-optical and electro-mechanical devices or systems, relevant to light ranging systems. Less work experience would have been compensated by a higher level of education or vice versa. The work experience would have included at least one year relevant to light ranging systems including LIDAR with a rotor-stator structure. We determine that this level of skill is consistent with the problems and solutions identified in the ’515 patent and the prior art. See, e.g., Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001); Ex. 1001, 1:30–3:48; Ex. 1004 ¶¶ 3–10; Ex. 1005, 1:1–2:31; Ex. 1006, 1:1–2:60; Ex. 1007, 1. We also determine that the proposed level of skill is reflective of the education and experience a person of ordinary skill would have had. Ex. 1003 ¶¶ 39–41; Ex. 2004 ¶¶ 67–68.” slip op. at 19

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “We determine that the claimed “stator circuit board” and “stator assembly” are separate and distinct elements in claims 1 and 14 because they are set forth as separate elements in these claims. See Ex. 1001, 48:27–29, 48:37–42, 50:8–10. Similarly, claim 22 recites “a stator circuit board assembly” that includes as subcomponents “a first circuit board,” “a second circuit board,” and a “stator assembly” which are separate and distinct subelements. Id. at 51:49–59. “Where a claim lists elements separately, ‘the clear implication of the claim language is that those elements are ‘distinct component[s]’ of the invention.” Becton, Dickinson and Co. v. Tyco Healthcare Gr., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (citing Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996)). This construction is confirmed by the ’515 patent’s specification. For example, the specification states that stator assembly 644 is affixed to circuit board 622, and, consistent with this statement, Figures 6A and 6D show them as separate elements joined together. Ex. 1001, 28:28–31, 30:16–24. Contrary to Petitioner’s contention, the specification’s stating that the stator elements are “built onto” or “integrated on” circuit boards (or assemblies containing them) does not mean that the stator assembly and circuit board are the same thing. Pet. Reply 1 (citing Ex. 1001, 4:19–22, 4:28–31). Rather, the specification describes the stator elements as part of the stator assembly which is coupled to a circuit board, as follows: VII. Integrated Electric Motor According to certain embodiments, an electric rotary motor can be integrated directly onto the circuit boards. The motor can have a "pancake" or "axial" design having a planar rotor assembly on a rotor board that opposes a planar stator assembly on an opposing stator board. The stator and rotor assemblies of the electric motor can be integrated onto the boards of the rotary actuator 608, i.e., the elements of the electric motor are one of many components on the surface of the printed circuit boards and thus a separate motor module is not required for LIDAR system 600. For example, referring back to FIG. 6D, stator assembly 644 can include an annular arrangement of multiple stator elements 644(i), e.g., vertically oriented solenoids (having their longitudinal axes perpendicular to the surface of the board) that are affixed (e.g., using an adhesive) to a board of the lower circuit board assembly 620 (e.g., board 622) or to a soft magnetic core that is then affixed to the lower circuit board assembly 620. Ex. 1001, 30:16–22. Thus, the ’515 patent’s specification expressly states that the stator elements of the stator assembly can be affixed to a printed circuit board, and thus the stator assembly is not the same thing as the board. Other parts of the specification are consistent with this view. See, e.g., id. at 4:54–57, 5:14–18, 6:50–53, 16:22–25.” slip op. at 23

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We have construed claim 1’s limitation 1(g) to require “stator circuit board” and “stator assembly” that are separate and distinct elements. See § III.C.1, supra. Johnson discloses coil windings that are formed by patterning interleaved structures in a multi-layered printed circuit board (PCB) forming the stator platform 330, and interconnecting them in groups with vias filled with conductive material. Ex. 1005, 11:66–13:57. Figs. 3C–3D; Ex. 2004 ¶¶ 138–139. We agree with Patent Owner that a POSITA would have considered the coil windings to be subcomponents of Johnson’s stator platform 330, which do not define a separate and distinct “stator assembly . . . coupled to a stator circuit board.” Ex. 2004 ¶ 139. In other words, the “printed” conductive tracks and traces would have been considered part of the PCB, not something separate. Id. Although Petitioner contends that Johnson discloses other embodiments in which a stator assembly is comprised of wires wound around a magnetic core (Pet. Reply 14–15 (citing Ex. 1005, 3:30–39, 4:56– 5:7; Ex. 1050 ¶ 30)), Petitioner does not show that Johnson discloses that those embodiments are coupled to a stator circuit board as recited in claim 1’s limitation 1(g). Petitioner did not rely on Pacala, Pardhan, nor Zhang to cover the deficiencies of Johnson. Accordingly, for the above reasons, we determine that Petitioner has” slip op. at 41

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Patent Owner’s arguments are persuasive. Johnson, Pardhan, and Zhang all disclose transformer coils positioned inside of the rotor/stator elements of the motor. Specifically, Johnson’s Figure 3B shows a transformer coil 310b positioned inside rotor elements (magnets 320, 322, 324, 326), and Figure 3C shows the corresponding transformer coil (unnumbered) inside of the stator coils defined by conductive structures. Ex. 1005, 11:51–60, 13:26–40. Similarly, Pardhan shows in Figure 7B a transformer 740a, 740b positioned inside of rotor/stator elements 738a, 738b, and suggests that a smaller rotary transformer is desirable. Ex. 1006, 20:64–21:13. Likewise, Zhang’s Figures 2 and 3 show an electrical power transmission unit including first coupling coil (5) and second coupling coil (unnumbered) positioned inside of motor coil (2). Ex. 1007, 4–5. Against the teachings of Johnson, Pardhan, and Zhang, Petitioner argues that putting the transformer coils outside of the stator coils would have been an obvious design choice. Pet. 50–51, 54–55. However, as Patent Owner noted, “merely stating that a particular placement of an element is a design choice does not make it obvious.” PO Resp. 50 (citing Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1067–70, 1069 n.4 (Fed. Cir. 2018); Ex. 2004 ¶ 186). That Johnson, Pardhan, and Zhang all disclose the transformer coils inside of the rotor/stator elements of the motor suggests that there were good reasons for doing this in their configurations. Zhang expressly teaches that one such reason is to avoid interference with power transmission.15 Ex. 1007, 3. Thus, according to Zhang, moving transformer coils outside of the rotor/stator elements in Petitioner’s combination would undesirably interfere with power transmission such that a POSITA would not have pursued the combination. Accordingly, we find that claim 22’s limitation 22(h) is missing from the combination of Pacala, Johnson, Pardhan, and Zhang.” slip op. at 53

  Patent outcomesUS 11,287,515 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,287,515
• Intel Corporation v. Besang Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

  The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Micron Technology, Inc. / Micron Semiconductor Products, Inc. et al. v. Besang Inc.No claims unpatentable
  PTAB · Nov 13, 2024 · IPR2023-00900 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 13–17 were not shown unpatentable: Lee-based grounds fail on the stackable add-on layer limitation, and Watanabe-based grounds fail on nonvolatile memory, enablement, or motivation to combine.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “meaning in the art. See Irdeto Access, Inc. v. Echostar Satellite Corp., 383 F.3d 1295, 1300 (Fed. Cir. 2004) (stating that, absent an accepted meaning in the art, “we construe a claim term only as broadly as provided for by the patent itself”). Thus, we must attempt to discern the meaning of this term from the claim language itself and from the remainder of the intrinsic record. See Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate.” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we construe “stackable add-on layer” to not include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. See Pet. 52 (asserting that in Lee “the layers of the array are directly deposited on the layers of each underlying level, and the array is deposited on the interlayer insulating layer formed over a substrate”); see also id. at 70 (“Lee discloses forming vertical memory devices through layer-by-layer sequential deposition on the substrate . . . .”). Therefore, Petitioner does not show that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Claims 14 and 15 Claims 14 and 15 depend from claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments for these claims do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 54–59. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14 and 15 would have been obvious in view of Lee alone. E. Claims 16 and 17 over Lee and Endoh Petitioner contends the subject matter of claims 16 and 17 would have been obvious over the combined disclosures of Lee and Endoh. Pet. 59–69. Petitioner’s arguments with respect to these claims, however, do not remedy the deficiencies noted above with respect to Lee and its monolithic, sequentially deposited memory array. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 16 and 17 would have been obvious over Lee and Endoh.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “combined Lee and Watanabe to achieve improved integration density. Pet. 71. Petitioner concedes, however, that the benefits of Lee’s design related to 3-D integration and improved integration density would be obtained if Lee’s memory structures are formed using either Lee’s monolithic construction method or Watanabe’s alternative stacking method. Pet. Reply 13–14 (citing Ex. 1041 ¶ 34). Thus, we are not persuaded that improved integration density provides a sufficient rationale for Petitioner’s combination of Lee’s memory device and Watanabe’s stacking method. Petitioner argues that Watanabe’s stacking method “improves the accuracy of the wiring” because the wiring is made “for each planar member.” Pet. 72 (citing Ex. 1005, 6:1–3). Watanabe also states that its disclosed methods provide “a low interconnection wire resistance.” Ex. 1005, 6:20–23. Petitioner does not, however, explain sufficiently how Watanabe’s stacking method would improve Lee’s device. For example, Petitioner does not address whether the alleged wiring benefit already existed in Lee’s monolithic array or explain how this benefit would also apply to Lee’s particular memory array, which differs in construction and elements from Watanabe’s device. This diminishes Petitioner’s benefits-based motivation to combine arguments. In general, a petitioner need not demonstrate that a particular alternate method would improve a prior art device in order to show a motivation to combine. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023); see Pet. Reply 20 (citing Intel). But here, Petitioner affirmatively invokes improvement of Lee’s device as a reason for the combination, and we must evaluate Petitioner’s contention. Moreover, any relative lack of improvement or benefits must be weighed against any problems the alternative method would introduce. See Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 795–96 (Fed. Cir. 2021) (noting that simultaneous advantages and disadvantages to a proposed combination must be analyzed to determine whether the disadvantages “outweighed any reason to combine”). Here, as discussed above in more detail with respect to the ground based on Watanabe, the evidence shows that one of ordinary skill in the art would have expected Watanabe’s bonding temperature of 900– 1000° C to damage the electronic devices in an underlying substrate. Ex. 2029 ¶¶ 75–76; Ex. 2028, 123:13–124:7; Ex. 2027, 715. The expected damage to Lee’s device, when balanced against the limited evidence of a benefit to the combination,7 outweighs the reason to combine Lee and Watanabe set forth in the Petition. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious over Lee and Watanabe. 2. Analysis – Claims 14 and 15 Claims 14 and 15 both depend directly from independent claim 13. Ex. 1001, 12:35–42. Petitioner’s arguments with respect to claims 14 and 15 do not remedy the deficiencies noted above with respect to independent claim 13. Pet. 73. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that these claims would have been obvious over Lee and Watanabe.” slip op. at 40

  • Expert testimonyPatent owner expert creditedOther

    “We credit the testimony of Dr. Przybylski that one of ordinary skill in the art would have understood that Watanabe’s stacked structure would be severely impacted if bonded at a temperature above 900° C, as disclosed in Watanabe. Ex. 2029 ¶¶ 76–77. Dr. Przybylski’s opinion is supported by Dr. Lee’s testimony (Ex. 2028, 123:13–124:7, 125:6–126:7), as well as Watanabe (Ex. 1005, 6:6–14) and Batude (Ex. 2027, 715). As further discussed below, we find that Petitioner has not rebutted Patent Owner’s showing of nonenablement, and Patent Owner has carried its burden to demonstrate that Watanabe was not enabled for bonding temperatures of 900–1000° C, as of the 2004 filing date of the ’702 patent.” slip op. at 32

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Duration Media LLC v. Rich Media Club LLCNo claims unpatentable
  PTAB · Aug 19, 2024 · IPR2023-00953 · APJ Michael J Fitzpatrick · IPR · Final written decision

  Claims 1–10 were not proven unpatentable under either §103 ground because the evidence did not show the claimed viewability determination.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We find Patent Owner’s argument persuasive. Indeed, it is unclear how Petitioner’s proposal accounts for the types of problems encountered in the art or prior art solutions to those problems. See Daiichi Sankyo, 501 F.3d at 1256 (identifying these factors, among others, as “a guide to determining the level of ordinary skill in the art”). Nor does Petitioner, in its Reply, address, let alone rebut, Patent Owner’s arguments that a person of ordinary skill in the art would have had some experience and/or knowledge in internet advertising. See generally Pet. Reply. Patent Owner proposes that a “person of ordinary skill in the art would have a bachelor’s degree in computer science or a similar major involving computer programming (or at least four years of practical computer programming experience) and at least two years of experience (in or out of college) in the field of internet advertising.” PO Resp. 12 (citing Ex. 2045 ¶54). We agree that a person of ordinary skill in the art would have some experience in internet advertising, although we fail to see why one year would not be enough to familiarize sufficiently a computer scientist and/or programmer with the types of problems encountered in the art or prior art solutions to those problems. Based on the competing proposals, arguments, and evidence before us, we adopt and apply the following level of skill in assessing Petitioner’s challenges to the patentability of the claims of the ’329 patent: a person that would have had a bachelor’s degree in computer science, computer engineering, or electrical (or similar) engineering with about three years of experience being in the field of internet advertising.” slip op. at 10

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Patents / published applications (effective date, provisional support)Reference not prior artDecided for patent owner

    “Petitioner’s resurrected argument is based on a fundamental misunderstanding of § 311(b). Section 311(b) provides: “A petitioner in an inter partes review may request to cancel as unpatentable 1 or more claims of a patent only on a ground that could be raised under section 102 or 103 and only on the basis of prior art consisting of patents or printed cancel the claims of the ’329 patent on the basis of Badros, Harkins, and Krassner. Pet. 11. Petitioner did not base its request, in whole or in part, on the Krassner publication. Id. Krassner clearly is a patent. It issued on August 13, 2019, far too late to be § 102(b) prior art. Even if we assume Krassner is also a “printed publication” withing the meaning of § 311(b), the same date would apply: August 13, 2019. Petitioner has not presented any evidence that the document that is Krassner was published prior to when it issued on August 13, 2019. That another document (the Krassner publication), which published much earlier, may contain the same or similar disclosure is not relevant to when Krassner was patented or published. In sum, Krassner is not prior art under 35 U.S.C. § 102(b). b) Whether Krassner is Prior Art Under 35 U.S.C. § 102(e) Although Krassner is not prior under 35 U.S.C.§ 102(b), we” slip op. at 13

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “Petitioner responds that, contrary to Patent Owner’s argument, “Harkins teaches that its invention can be used in web pages.” Pet. Reply 18 (citing Ex. 1004 ¶30). Although Petitioner’s citation is off by one paragraph, Petitioner’s response about what Harkins teaches is correct. See Ex. 1004 ¶29 (“The present invention may be implemented for provision of virtually any type of advertising (e.g., print, radio, television, Internet, billboard, etc.) via any type of advertising medium (e.g., newspaper, magazine, radio broadcast, Web pages, billboards, etc.) without departing from the scope of the present invention.”). We find that Harkins is from the same field based on its express statement that it is applicable to “virtually any type of advertising” and “any type of advertising medium,” including “Web pages.” Ex. 1004 ¶29. Further, even if this were insufficient to place Harkins in the same field as the ’329 patent, we find that Harkins is reasonably pertinent to the particular problems with which the ’329 patent inventors were involved. In sum, we find that Harkins is analogous art to the ’329 patent.” slip op. at 19

  • Strike new argumentNew argument disregardedGranted

    “Paper 60 (“PO Mot. To Exclude”), 9–10.6 Patent Owner is correct in this regard and, thus, we grant Patent Owner’s Motion to Exclude with respect to the testimony in the second Smedley Declaration and the Madansky Declaration opining that Badros teaches the determination limitation. Paper 60, 9–12. Petitioner, in its Opposition to the Motion to Exclude, argues that Patent Owner’s arguments about the “viewability test” were “surprising.” Paper 62, 8. We are not persuaded by Petitioner’s argument. The “viewability test” is a claim limitation. Petitioner should have anticipated that Patent Owner would argue that limitation. See In re Gardner, 449 F. App’x 914, 916 (Fed. Cir. 2011) (“This court has held that when evaluating claims for obviousness under 35 U.S.C. § 103, all the limitations of the claims must be considered and given weight.” (citing Stratoflex, Inc. v. Aeroquip Corp., 713 F.2d 1530 (Fed. Cir. 1983)); Univ. of Strathclyde v. 6 Patent Owner’s Motion to Exclude seeks to exclude, in part or in whole, Exhibits 1020–1022, 1025–1030, and 1034–1040, which were submitted with Petitioner’s Reply, of which Exhibits 1026 and 1027 are the declaration by Dr. Madansky and the second declaration by Dr. Smedley, respectively. Mot. To Exclude. The Motion to Exclude also seeks to exclude “Exhibits” 1017 and 1018, which are not filed or of record in this case but which are referenced in the Reply. Id. For example, Exhibit 1017 is the Krassner publication, which Petitioner unsuccessfully moved to add to the record as supplemental information. See Paper 21, 3 n.1 (expunging the Krassner publication and stating that it “need not -- and indeed may not -- be re-filed under a new exhibit number”). Apart from the portions of Dr. Smedley’s second declaration and Dr. Madansky’s declaration opining that Badros teaches the “determination” limitation, we dismiss the Motion to Exclude as moot. obviousness determination generally requires a finding that “all claimed limitations are disclosed in the prior art’.” (citing PAR Pharm., Inc. v. TWI Pharms., Inc., 773 F.3d 1186, 1194 (Fed. Cir. 2014)). Petitioner argues that “[v]iewability tests were well known for well over a decade prior to the ’329 patent’s priority date.” Reply 9. If that were the case, then Petitioner should have made its argument in the Petition. Section 312(a) of Title 35 is titled “Requirements of Petition,” and it specifies that a petition must identify, among other things, “the evidence that supports the grounds for the challenge to each claim, including . . . (B) affidavits or declarations of supporting evidence and opinions, if the petitioner relies on expert opinions.” 35 U.S.C. § 312(a)(3); see also 37 C.F.R. § 42.104(b)(4)–(5) (“The petition must specify where each element of the claim is found in the prior art patents or printed publications relied upon; and . . . the supporting evidence relied upon to support the challenge.”). Thus, “Petitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Board’s Consolidated Trial Practice Guide, 73 (Nov. 21, 2019).7 Dr. Smedley’s testimony in his second declaration, that “Badros discloses Patent Owner’s ‘viewability test’” (Ex. 1027 ¶11), is clearly evidence to make out a prima facie case of unpatentability. The same is true of Dr. Madansky’s testimony that she agrees with Dr. Smedley in this regard. Ex. 1026 ¶4.” slip op. at 25

  Patent outcomesUS 11,443,329 not shown unpatentable
  § 102 anticipation§ 103 obviousnesscites Graham
  Patents in suitUS 11,443,329

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.