- Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Oct 5, 2026 · IPR2025-00438 · APJ Lilan Ren · IPR · Final written decision
Claims 1–5, 7–13, and 16–20 are unpatentable; the Board found the challenged claims unpatentable on the grounds set out in its conclusions and summary table.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s definition of the level of ordinary skill in the art, and Petitioner’s definition appears consistent with the disclosures of the ’466 patent and the prior art of record. Accordingly, we adopt Petitioner’s definition. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). C. Claim Construction” slip op. at 12
- BurdenUnpatentable
“Decision under 35 U.S.C. § 318(a) as to the patentability of the challenged claims of the ’466 patent. For the reasons discussed below, we determine Petitioner has established by a preponderance of the evidence that claims 1– 5, 7–13, and 16–20 of the ’466 patent are unpatentable.” slip op. at 2
Patent outcomesUS 10,569,466 unpatentableNonecites Phillips · KSR · GrahamPatents in suitUS 10,569,466 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 29, 2026 · IPR2025-00532 · APJ Hyun J Jung · IPR · Final written decision
Claims 1–16 are unpatentable under § 103 over Warren, Warren and Dunn, Calderon and RepRap20208, and Calderon, RepRap20208, and Dunn.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“of ordinary skill in the art would have made the proposed combination in the manner asserted with a reasonable expectation of success. Weighing our underlying factual determinations, a preponderance of the evidence persuades us that claim 7 of the ’381 patent is unpatentable over Calderon, RepRap20208, and Dunn. Arctic Cat, 876 F.3d at 1361.” slip op. at 108
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“involves a case-by-case inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public.” In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). Whether a document qualifies as a printed publication is a legal conclusion based on underlying factual determinations. Medtronic, Inc. v. Barry, 891 F.3d 1368, 1380 (Fed. Cir. 2018). slip op. at 69
Patent outcomesUS 10,556,381 unpatentable§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,556,381 - Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Google LLC v. Escapex IP LLCAll claims unpatentablePTAB · Mar 30, 2026 · IPR2025-00337 · APJ Justin T Arbes · IPR · Final written decision
Claims 1–24 are unpatentable under § 103: claims 1–3, 5–6, 13–15, 17–18 over Fuloria and Andler; the remaining claims over combinations adding WO ’100, Bartholomew, Kirk, or Cheung.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“a person of ordinary skill in the art would have had “a bachelor’s degree in computer science or a similar field and three years of professional computer programming experience, including experience with networked media and databases, where additional education can substitute for experience or vice versa.” Pet. 20 (citing Ex. 1002 ¶¶ 27–31). In the Decision on Institution, Inst. 7–8. Patent Owner adopts Petitioner’s proposed definition “because it comports with the technology and claims of the ’687 [p]atent as well as the asserted prior art.” PO Resp. 4; Tr. 36:4–18. Based on the full record developed during trial, including our review of the ’687 patent and the types of problems and solutions described in the ’687 patent and cited prior art, we maintain the previously adopted definition of the level of ordinary skill in the art and apply it for purposes of this Decision.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner
“37 C.F.R. § 42.100(b). Petitioner argues that the term “engagement” in independent claims 1, 11–13, 23, and 24 is defined in the Specification of the ’687 patent and should be interpreted to mean “an indication that a user should be distinguished with respect to the content over another user.” Pet. 11 (citing Ex. 1001, col. 5, ll. 53–55; Ex. 1002 ¶ 41). Patent Owner agrees that the Specification “defines” the term in that manner. PO Resp. 13. The Board did not interpret any terms in the Decision on Institution. Dec. on Inst. 9. We agree with the parties’ proposed interpretation of “engagement” and apply it for purposes of this Decision, based on the Specification’s disclosure that “[a] user engagement with content refers to an indication that a user should be distinguished with” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“No other terms require express interpretation to determine whether Petitioner has met its burden to prove unpatentability of the challenged claims. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“Because we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy,’ we need not construe [a particular claim limitation] where the construction is not ‘material to the . . . dispute.’” (emphasis added) (citation omitted)).” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
Patent outcomesUS 10,474,687 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,474,687 - Valve Corporation v. Immersion CorporationAll claims unpatentablePTAB · Mar 23, 2026 · IPR2024-00582 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–6, 14–16, and 19 are unpatentable based on anticipation by or obviousness over Pratt, and obviousness over Pratt–Ku, Ku, or Ku–Jiang.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that formal education could substitute for practical experience, and vice versa. Pet. 6, PO Resp. 18. The parties’ proposed levels of ordinary skill appear to be substantially similar, supported by testimonial evidence, and consistent with the asserted prior art and the types of problems and solutions identified in the ’738 patent. See, e.g., Ex. 1001, 1:6–61. Although we discern no difference in the outcome of this decision from choosing one over the other, we adopt Petitioner’s proposed level of skill for this decision. The outcome of our decision would be the same under Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We find insufficient support in the specification or prosecution history to narrow the term “haptic effect” to only one that has not been modified or combined with another haptic effect. The ’738 patent still refers to combined or modified haptic effects as a “haptic effect.” Ex. 1001, 11:35–38 (“a haptic effect may further be modified or combined with another haptic effect” and “the haptic effect can include one or more haptic effects”). We also find no support for importing into the construction of “haptic effect” the ’738 patent’s example in which a haptic effect can be “based on the proximity signal and the touch sensor signal.” That is already an explicit claim limitation. Id. at 14:19–20 (“generate a haptic output signal based at least in part on the first [proximity] and second [touch] sensor signals”). Including that limitation as part of the construction of “haptic effect” would render the limitation superfluous. See Apple, Inc. v. Ameranth, Inc., 842 F.3d 1229, 1237 (Fed. Cir. 2016) (“The Board was correct to not include in its construction of ‘menu’ features of menus that are expressly recited in the claims . . . . Construing a claim term to include features of that term already recited in the claims would make those expressly recited features redundant.”). We also disagree with Patent Owner that the ’738 patent’s references to haptic effects modified or combined with other haptic effects are unclaimed embodiments. The ’738 patent discloses that a proximity-based haptic effect may be combined with a touch-based haptic effect, such as when “a particular haptic effect associated with a particular control on a user interface element [is] further . . . modified or combined with another haptic effect based on the proximity sensor signal,” or when “the haptic effect [to be output by the processor] . . . include[s] a haptic effect meant to confirm ‘pushing’ on a virtual button.” Ex. 1001, 11:32–40. These examples are consistent with the claim language and we find no credible evidence in the record that these embodiments are intended to be excluded from the claimed invention. Thus, we agree with Petitioner that it would be incorrect to construe the term “haptic effect” to include the extraneous limitations Patent Owner proposes. We also agree with Petitioner that a person of ordinary skill in the art reading the ’738 patent disclosure would have understood that a combined or modified haptic effect is still a haptic effect.” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“To show anticipation under § 102, a petitioner must locate every element in a claim, arranged as recited in the claim, in a single prior art reference. See Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008). The limitations may be present in the reference “either explicitly or inherently.” In re Schreiber, 128 F.3d 1473, 1477 (Fed. Cir. 1997). In making this determination, we consider the reference “together with the knowledge of one of ordinary skill in the pertinent art.” In re Paulsen, 30 F.3d 1475, 1480 (Fed. Cir. 1994) (citing In re Samour, 571 F.2d 559, 562 (CCPA 1978)).” slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“We find Petitioner’s arguments persuasive and disagree with Patent Owner’s arguments to the contrary. Ku discloses summing two overlapping vibration signals, one “based at least in part on” data from a proximity sensor and another “based at least in part on” data from a touch sensor. Ex. 1008, Fig. 12 (items 705, 710, and 715). The summed signal 715 is the basis for generating what the user would perceive as a single haptic effect. See Ex. 1004 ¶ 210–212. This meets limitation 1F. We agree with Petitioner’s argument as to why there would have been a motivation to modify Pratt to include Ku’s teachings. Petitioner’s argument is not merely that Pratt was ready for improvement; Petitioner persuasively argues that a person of ordinary skill in the art would have had reason to add Ku’s method for confirming that the user has touched the intended icon to Pratt’s system. Both Pratt and Ku already disclose using both proximity and touch data in generating a haptic effect, and based on the evidence of record, we are of the view that combining the two teachings would not have been uniquely challenging or otherwise beyond the level of ordinary skill in the art. See Leapfrog Enters., Inc. v. Fisher-Price, Inc., 485 F.3d 1157, 1162 (Fed. Cir. 2007) (“Leapfrog presents no evidence that the inclusion of a reader in [electronic children's toys] was uniquely challenging or difficult to one of ordinary skill in the art.” (citing KSR, 550 U.S. at 419–420))” slip op. at 32
Patent outcomesUS 11,175,738 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,175,738 - Aptiv Services US, LLC v. Microchip Technology, Inc.All claims unpatentablePTAB · Mar 20, 2026 · IPR2024-00646 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–18 are unpatentable under § 103 over Al-Shyoukh, Ivanov, and Stanescu; the Board did not reach the alternative ground.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner’s proposal is most like Petitioner’s alternative proposal which would include a bachelor’s degree and two years of experience. However, Patent Owner does not provide a specific number of years of industry experience and Patent Owner would include mixed-signal IC design as an alternative to analog circuit design. We consider analog circuit design to be most pertinent to the problems and solution discussed in the ’074 patent. See Ex. 1001, 1:15–2:44. In addition, we find credible Petitioner’s argument that an ordinarily skilled artisan with a bachelor’s degree would have had two years of experience, whereas Patent Owner’s proposal does not provide a specific number of years. Thus, we determine that a person of ordinary skill in the art would have had a bachelor’s degree and two years of experience in analog circuit design. Nevertheless, the outcome of our decision would be the same under either of the party’s proposals.” slip op. at 8
- Prior constructionPrior construction adoptedDecided for petitioner
“Because neither party has argued that the district-court constructions should be modified or elaborated for this proceeding, and the constructions appear reasonable, we adopt these constructions for this decision. We also take judicial notice of the district court’s Memorandum supporting the claim construction order. Ex. 3001.9” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We agree with Petitioner that “gm boosting” is the only gm enhancement referred to in the ’074 patent, that the ’074 patent uses the terms “gm enhanced” and “gm-boost” synonymously, and that Patent Owner has failed to point to any credible intrinsic evidence of this alleged distinction. Although, “[i]n the absence of any evidence to the contrary, we must presume that the use of . . . different terms in the claims connotes different meanings, CAE Screenplates Inc. v. Heinrich Fiedler GmbH, 224 F.3d 1308, 1317 (Fed. Cir. 2000), in this case there is evidence to the contrary. In particular, the ’074 patent never refers to “gm enhancement” as a function separate from “gm boosting.” Indeed, the transistors (368, 370, and 382) that Patent Owner identifies as performing the function of “gm enhancement” are disclosed as part of a “gm-boost stage.” Ex. 1001, 5:8–24. Patent Owner’s alleged separation of Figure 3B into distinct “gm boosting” and “gm enhancement” is not consistent with the intrinsic evidence and is based on the conclusory testimony of Dr. Taylor. Thus, based on the evidence of record, we disagree with Patent Owner’s proposed construction distinguishing the terms “gm enhanced” and “gm-boost” in claim 1. Rather, we find persuasive Petitioner’s argument that a person of ordinary skill in the art would have regarded these terms to be synonymous. We need not otherwise construe these two terms to resolve the contested issues in this proceeding. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We find Petitioner’s argument persuasive that a person of ordinary skill in the art would have had reason to follow Ivanov’s teachings to include an enable/disable function in Al-Shyoukh’s biasing circuit to limit that circuit’s standby current for reasons of power-efficiency. Pet. 25–26; Ex. 1002 ¶¶ 67–68. The evidence of record also suggests that an enable/disable function was well known in the art and that it would have been within the level of ordinary skill in the art to add such a function to a biasing circuit, taking into consideration any known tradeoffs. Pet. Reply 17–18; Ex. 1002 ¶¶ 60, 67–68; PO Resp. 13–14 (acknowledging that “any [person of ordinary skill in the art” would attest[ that] engineering is full of tradeoffs” and listing some of the known tradeoffs that “a [person of ordinary skill in the art] would need to consider”). We also disagree with Patent Owner’s argument that Al-Shyoukh, Rincon-Mora, or other references teach away from adding an enable/disable function to Al-Shyoukh. Patent Owner has not pointed to anything in the prior art that criticizes, discredits, or otherwise discourages investigation into the claimed invention. Meiresonne v. Google, Inc., 849 F.3d at 1382.” slip op. at 34
Patent outcomesUS 9,471,074 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,471,074 - Apple Inc. v. S.M.R Innovations Ltd And Y.M.R Tech LtdAll claims unpatentablePTAB · Jan 27, 2026 · IPR2024-01048 · APJ Mary C Hoffman · IPR · Final written decision
Claims 1, 5–8, 10, 11, 13, 15, 16, 18, and 19 are unpatentable as obvious under § 103 over the four stated combinations.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Patent Owner does not contend that the differences between the parties’ formulations would affect our patentability analysis. PO Resp. 2–4. Petitioner does not dispute that Patent Owner’s declarant, Mr. Ginter, who has a bachelor’s degree and years of experience in wireless communication, qualifies as a POSITA. Tr. 43; Ex. 2009 ¶¶ 5–10. Petitioner also concedes that its challenges do not hinge on which formulation we accept. Tr. 43. We agree that our decision would be the same regardless of the differences between the formulations. We adopt Patent Owner’s proposed formulation, which is supported by declaration testimony and generally consistent with the level of skill reflected in the ’648 patent and the prior art of record. Ex. 2009 ¶¶ 21–25; Exs. 1001, 1004–1009.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree. Although claim 1 recites step 1b before step 1d, method steps are not ordinarily construed to require a specific order of performance unless the claims or Specification directly or implicitly require that specific order. See Altiris, Inc. v. Symantec Corp., 318 F.3d 1363, 1369–70 (Fed. Cir. 2003). Here, nothing in the express claim language precludes performing step 1d before step 1b. The claim does not expressly recite signaling the device(s) previously “identified as available.” Nor does the claim otherwise specify that step 1b must precede step 1d. For example, the claim does not contain temporal terms like “then,” “next,” or “further.” Although Patent Owner points out that a term of step 1d (i.e., “the” one more available devices) derives antecedent basis from step 1b, this alone does not require performing step 1b before step 1d. PO Resp. 5, 10; Sur-reply 11. Rather, we agree with Petitioner that step 1d’s reliance on step 1b for antecedent basis only serves to clarify that the steps refer to the same device(s), not to determine the performance order. Reply 4, 5. We also agree with Petitioner that claim 1 inconsistently employs antecedent basis for other claim elements, which undermines Patent Owner’s argument that step 1d’s antecedent basis establishes a specific order. Reply 7 (referring to the recited “media content,” “the media content,” and “a media content”).” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundDecided for petitioner
“We disagree. Petitioner met its burden to show that the combination would have been obvious. Zhang teaches a cellular phone (which logically receives cellular calls) and routing media to audio devices on its network. Ex. 1004, 3:25–29. Missing in Zhang is an explicit teaching that its cellular calls (as opposed to other media) are routed. Pasanen explicitly teaches routing cellular calls to networked audio devices. Ex. 1006; 4:20–37. Taken together, routing Zhang’s cellular calls across its network would have been obvious to a POSITA. Patent Owner’s argument that Zhang-Fillebrown’s 802.11 or HomeRF network do not support routing cellular calls discounts Zhang’s teaching that “its network can be built on top of many different kinds of communication media” including but not limited to 802.11 and HomeRF, as well as the “optional HomeRF features” Petitioner claims would sufficient to implement the claimed functionality. Ex. 1001, 4:46–50; Reply 20–22 (citing Ex. 1037 ¶¶ 13–15); Sur-reply 3–6 (arguing that HomeRF’s isochronous mode and DECT protocol are optional and would not have been necessary to practice Zhang’s subject matter). And though Zhang does not discuss transcoding or specific HomeRF features/protocols, which Patent Owner argues are necessary for routing cellular calls across Zhang’s 802.11 or HomeRF network, we agree with Petitioner that the ’648 patent also provides scant technical details as to how its system routes cellular calls over its local network, suggesting that such was well known at the time. Reply 17 (citing, e.g., Ex. 1001 7:9–25).” slip op. at 28
Patent outcomesUS 10,547,648 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,547,648 - Reolink Innovation Inc. / Shenzhen Reolink Technology Co., Ltd. v. Throughtek Co., Ltd.All claims unpatentablePTAB · Jan 23, 2026 · IPR2024-01192 · APJ Michael J Strauss · IPR · Final written decision
Claims 1–10 and 16 are unpatentable as obvious over the asserted combinations of the Lorex Manual or Lorex Video with the identified references.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedDecided for petitioner
“Patent Owner does not dispute any of Petitioner’s contentions as to the effective filing date, stating in agreement with Petitioner’s asserted Effective Filing Date of the Challenged Claims that “[t]he ’916 Patent claims a priority of a provisional application 61/924,240 filed on January 7, 2014.” PO Resp. 8. Given that the parties are in agreement on the January 7, 2014, effective filing date, we similarly use January 7, 2014, as the effective filing date of the challenged claims for purposes of this Decision.” slip op. at 4
- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. Level of Ordinary Skill in the Art Relying on the testimony of Vlad Kardashov, Petitioner proposes that a person of ordinary skill in the art at the time of the invention of the ’916 patent “would have had a bachelor’s degree in electrical engineering and two 7 US 2012/0198040 A1, published August 2, 2012 (Ex. 1011, “Kuo”). 8 The subject ’916 patent claims priority to Kuo as a continuation-in-part of that earlier filed application. Ex. 1001, code (63). 9 Lorex Technology Inc., “How to set up remote access for DVR using - Lorex Stratus Connectivity” (June 18, 2013), available at https://www. youtube.com/watch?v=fMPRi9WFuTM (Ex. 1012, the “Lorex Video”). 10 US 2012/0113265 A1, published May 10, 2012 (Ex. 1013, “Galvin”). years of work experience with network and communication technologies.” Pet. 8 (citing Ex. 1003 ¶¶ 12–14). Patent Owner does not contest Petitioner’s proposal or provide a proposal of its own. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is consistent with the technology described in the ’916 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that “no claim elements need a formal construction for purposes of resolving controversies in this proceeding.” Pet. 9 (citing Ex. 1003 ¶¶ 43–44; Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011), Google Inc. v. Intellectual Ventures II LLC, 701 Fed. Appx. 946, 956 (Fed. Cir. 2017)). Petitioner states “[a]ll claim terms should be construed according to the Phillips standard.” Id. (citing Phillips, 415 F.3d at 1303; 37 C.F.R. § 42.100). Patent Owner presents no proposed claim constructions. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes on the current record. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artPriority date awardedDecided for petitioner
“that Patent Owner fails to demonstrate that the Lorex Manual was based on a disclosure made by the inventor or joint inventor or by another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor. The Lorex Manual is relied on under Ground 1A, exclusively or in the alternative to or in combination with Kim, for all claim elements. Pet. 9– 31. Patent Owner fails to demonstrate that this subject matter was disclosed to Lorex by ThroughTek, much less by one of the inventors of the ’916 Patent.” slip op. at 22
Patent outcomesUS 9,774,916 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,774,916
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.