- PTAB · Oct 6, 2026 · IPR2025-00530 · APJ Scott C Moore · IPR · Final written decision
Original claims 1–9 were canceled; the non-contingent motion to add substitute claims 10–18 was denied for lack of written-description support, and claim 18 was also indefinite.
RulingsFinal written decision- 112 supportMotion to amend, deniedDenied
“that either the ’303 application or the ’838 provisional contain adequate written description support for the disputed feature of limitation [10.d]. Though the disclosures cited by Patent Owner indicate that a secondary identifier can be used to aid in verification of a UAV, these disclosures also make clear that both first and second identifiers are transmitted by and received from the UAV. See, e.g., Ex. 2002, 4:15–17, 30:24–31:6; Ex. 2003 ¶¶ 14, 66. Patent Owner’s reliance on disclosure characterized as transmitting an identifier from a remote computing system “through the UAV” (Reply 2) is not persuasive. The cited disclosures from the ’303 application and ’838 provisional generally disclose that the identifiers transmitted by a UAV can be “generated remotely,” such as by a “remote computing system.” Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45. But Patent Owner has not identified disclosure indicating that a remote computing system may transmit an identifier to the identification receiver. In the ’303 application and ’838 provisional, only the UAV (which is part of the discrimination system, and thus not “remote”) actually transmits identifiers to the identification receiver. Patent Owner is correct in its assertion that an “aerial system identifier can be generated on-board the aerial system” or “generated remotely . . . at a remote computing system.” Mot. 7 (citing Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45). But even if a UAV’s identifier was at some time in the past generated by a remote computing system, the subsequent transmission of that identifier from the UAV to the identification receiver would not satisfy the plain language of limitation [10.d]. The claim language “receive … a second identifier from a computing system that is remote to the discrimination system” requires the receipt of a transmission of the second identifier from a remote computing system. This claim language limits the source of the received transmission (i.e., where the particular transmission is “receive[d] … from”). Thus, the relevant issue is from where was the recited second identifier received. The relevant is not where the second identifier was originally generated.” slip op. at 12
- Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed
“We determine that the disputed language in limitation [10.d] is not indefinite. There is no recitation in proposed substitute claim 10 that the second identifier is transmitted solely from the identifier transmission system. Thus, the alleged irreconcilable contradiction cited by Petitioner is not recited in the claims. Petitioner’s position appears to rest on the fact that the ’303 application and ’838 provisional do not disclose receiving the second identifier from a remote computing system. See Sur-reply 6 (“To manufacture written description support, [Patent Owner] argues the claim encompasses identifiers routed ‘through the UAV.’”). Though we agree that limitation [10.d] lacks adequate written description support, this defect does not render the claim indefinite because the scope of limitation [10.d] is otherwise reasonably certain based on its plain language. See supra § III.C.4.” slip op. at 18
- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artPriority date, deniedDecided for patent owner
“In contrast, the ’393 provisional never discloses that the described drone defense system may use the identity of a detected drone to develop a particular countermeasure. The disclosed RTSS certainly uses identity information to determine whether a drone is a threat. And if a threat is identified, the RTSS immediately starts “a series of processes … to determine what rule of engagement will be applied on the intruding drone.” Ex. 1006 ¶ 10. The ’393 provisional discloses that the system may select a particular countermeasure based on (i) the particular zone within a protected area within which a drone is located, (ii) “the behavior of the hostile drone,” or (iii) “other instructions.” Id. ¶¶ 9, 10. But the ’393 provisional never discloses that these “other instructions” may include the identity of the drone. The system disclosed in the ’393 provisional uses the identity of a drone to determine whether to activate the countermeasure system. See id. ¶¶ 16–18. But there is no disclosure in the ’393 provisional that the countermeasure system, once activated, uses the identity of the drone to develop the particular countermeasure to be employed. See generally Ex. 1006. Thus, though the Whitmarsh reference itself contains ample written description support for limitation [19e], the earlier-filed ’393 provisional does not. On this record, and having reviewed the ’393 provisional in its entirety, we determine that the ’393 provisional does not “reasonably convey[] to those skilled in the art that the inventor had possession of” the subject matter of limitation [19e] of Whitmarsh’s claim 19 “as of the filing date” of the ’393 provisional. See Ariad, 598 F.3d at 1351.” slip op. at 27
§ 102 anticipation§ 112 disclosurecites NautilusPatents in suitUS 10,249,199 - PTAB · Oct 6, 2026 · IPR2025-00525 · APJ Scott C Moore · IPR · Final written decision
Original claim 21 was canceled; the Board denied substitute claim 22 for new matter and held it obvious under §103 based on six combinations.
RulingsFinal written decision- 112 supportMotion to amend, deniedDenied
“First, Patent Owner has not shown possession of the disputed feature of a “radio communication module [that] is configured to utilize a secure identifier, the secure identifier comprising a specified excitation.” In the ’406 application, the term “excitation” is used exclusively to refer to a light beam signal. See Ex. 2015, 7:8–13, 9:8–10, 23:9.2 The ’406 application discloses that an identification box on an aircraft may include both an RF module and a separate light sensor. See Ex. 2015, 7:3–11. But nowhere does the ’406 application describe receiving a light beam (e.g., an excitation) with the RF module of the identification box (as opposed to the light sensor), so as to provide support for proposed substitute claim 22’s recitation of a “radio communication module” configured to utilize “a secure identifier . . . comprising a specified excitation.” We disagree with Patent Owner that it suffices that one of ordinary skill in the art “would recognize that these disclosures are equally applicable to the RF-only embodiments” (Reply 5). “It is not sufficient for purposes of the written description requirement . . . that the disclosure, when combined with the knowledge in the art, would lead one to speculate as to modifications that the inventor might have envisioned, but failed to disclose.” Lockwood v. Am. Airlines, Inc., 107 F.3d 1565, 1572 (Fed. Cir. 1997). On this record, and having reviewed the ’959 Patent, the ’153 provisional, and the ’406 application, we find no evidence in those documents that the named inventor was in possession of the concept of a radio communications module “configured to utilize a secure identifier” where “the secure identifier compris[es] a specified excitation.” Second, setting aside the “radio communication module” in proposed substitute claim 22, Patent Owner also has not shown that the named inventor was in possession of the feature of a “secure identifier comprising a specified excitation.” Patent Owner’s argument that the ’406 application describes a light beam directed to a particular aircraft (see Reply 4–5) is 2 The same is true of the ’153 provisional. See Ex. 2016 ¶¶ 29, 34. unavailing. The fact that the properties of a particular light beam indicate that the light beam is intended for a particular aircraft does not demonstrate that the light beam is a “secure identifier,” as we have construed that term. Patent Owner has not identified any disclosure in the ’406 application of a “secure identifier” comprising a light beam, let alone that such light beam can be utilized by a “radio communication module.” The only references to “secure” identifiers in the ’406 application describe radio frequency signals. See Ex. 2015, 2:4–6, 15:21–17:12.3 Having reviewed the ’959 Patent, the ’153 provisional, and the ’406 application, we find no evidence in those documents that the named inventor was in possession of the concept of a “secure identifier comprising a specified excitation.”” slip op. at 15
- ScopeDecided for patent owner
“not impermissibly broaden the scope of the claims of the ’959 Patent. As Patent Owner suggests, there were no limitations in original claim 21 on the type of radio signal the radio communication module could receive, and so it follows that proposed substitute claim 22 does not now encompass receiving a broader set of radio signals. We see no basis for Petitioner’s argument that the past tense verb “received” limited original claim 21 to “signals of a compatible ‘type’ and ‘range.’” Opp. 7. Moreover, the claim language (with the proposed deletion shown double brackets) provides that “the radio communication module is configured to receive a [[received]] radio signal.” Any radio signal that the radio communications module receives would necessarily be a “received” radio signal. Thus, deleting the redundant word “received” does not enlarge the scope of this claim limitation. We also are not persuaded by Petitioner’s suggestion that removing the term “received” broadens original claim 21 by deleting a requirement that the radio signal have already been previously received by the claimed device. See Sur-reply 9. Original claim 21 simply recited, using redundant language, that “the radio communication module is configured to receive a received radio signal.” Ex. 1001, 18:5–7. The most natural reading of this language is that the phrase “received radio signal” is just a description of a radio signal that is received by the recited radio communications module. Petitioner has cited no persuasive evidence that one of ordinary skill in the art would have counterintuitively interpreted this language to impose an additional requirement that the “received radio signal” must have been received twice—a first time by some other component of the device, and a second time by the recited radio communication module. Accordingly, we determine that the proposed amendment does not improperly broaden claim scope.” slip op. at 10
- Disclosure Requirements (§112) › Definiteness (Nautilus)IndefiniteNot shown unpatentable
“572 U.S. 898 (2014). See Memorandum: Approach to Indefiniteness Under 35 U.S.C. § 112 in AIA Post-Grant Proceedings (Jan. 6, 2021).4 Under Nautilus, a claim is indefinite if fails to “inform those skilled in the art about the scope of the invention with reasonable certainty.” 572 U.S. at 910. We agree with Patent Owner that neither of the identified terms are indefinite. Regarding the term “low-altitude aircraft,” we determine the Specification provides a sufficient basis for understanding the scope and meaning of this term with reasonable certainty. The U.S. Court of Appeals for Federal Circuit has explained that, when a term of degree is recited in a claim, it is necessary “to determine whether the patent’s specification provides some standard for measuring that degree.” See Seattle Box Co. v. Indus. Crating & Packing, Inc., 731 F.2d 818, 826 (Fed. Cir. 1984); see also Datamize, LLC v. Plumtree Software, Inc., 417 F.3d 1342, 1350 (Fed. Cir. 2005) (“Some objective standard must be provided in order to allow the public to determine the scope of the claimed invention.”). Here, the Specification describes the related art as including “small UASs (e.g., aircrafts up to 25 pounds flying up to 500 ft of the low altitude airspace).” Ex. 1001, 1:50–52. One of ordinary skill in the art would understand from the Specification that the cited disclosure provides an objective standard for determining the scope of a low-altitude aircraft as one that is designed to fly up to a maximum altitude of about 500 feet.” slip op. at 20
- Skill levelSkill level petitioner adoptedDecided for petitioner
“In our Institution Decision, we adopted Petitioner’s proposal that one of ordinary skill in the art would have had the following qualifications: [E]ither (1) a Bachelor of Science in Mechanical Engineering, Electrical Engineering, Aerospace engineering, or an equivalent field, as well as at least 2 years of academic or industry experience in the aerospace, avionics, telecommunications, or electronic device manufacturing industry, or (2) at least four years of industry experience in any of the above industries. Paper 13, 5 (citing Pet. 21). Patent Owner has not disputed this formulation; thus, we adopt it for purposes of this Decision. See Paper 13, 10–11 n. 8.” slip op. at 23
§ 103 obviousness§ 112 disclosurecites Graham · NautilusPatents in suitUS 10,713,959 - PTAB · May 24, 2024 · IPR2023-00861 · APJ Christopher M Kaiser · IPR · Remand
The Board denied institution because Petitioner did not show a reasonable likelihood that any challenged claim was unpatentable under any asserted ground.
RulingsRemand decision- RemandOther
“Accordingly, the Director instructed us to “determine whether Petitioner has demonstrated that Figure 1 of Godefroy ‘is clear on its face’ or would have reasonably suggested the placement of Godefroy’s sacrificial anode ‘within 10 inches’ of the hot liquid inlet.” Id. at 9. “In making this determination,” the Director instructed us to “consider whether the expert testimony provides sufficient ‘technical detail, explanation, or statements supporting why the expert determines that the feature in question was required or would have been obvious based on the prior art disclosure.’” Id. In addition, although the Director’s decision “is limited to [our] application of Hockerson to the grounds in the Petition involving Godefroy,” the Director instructed us also to “consider what effect, if any, this decision has on the other asserted grounds.” Id. Finally, the Director instructed us to “set forth [our] interpretation” of “the limitation ‘within 10 inches of a hot liquid inlet to the radiator.’” Id. at 8 n.4.” slip op. at 4
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“original decision, the Director’s decision, and the evidence currently of record, we determine that Petitioner has not shown a reasonable likelihood that it will prevail in showing that at least one of the challenged claims is unpatentable. Accordingly, we do not institute an inter partes review of any challenged claim based on any ground asserted in the Petition. IV. ORDER For the reasons given, it is: ORDERED that, pursuant to 35 U.S.C. § 314, the Petition is denied, and no inter partes review is instituted.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“evidence. The challenged claims require that a sacrificial anode be placed within a certain distance—10 inches—of the hot liquid inlet, and, because the inlet has some non-zero size, it might be possible for an anode to be within that distance from some parts, but not from all parts, of the inlet. Accordingly, specifying the center axis of the inlet as the point from which to measure the distance to the anode improves on the plain words of the claim in terms of achieving the claim’s objective of placing the anode within a specified distance of the inlet. Moreover, when discussing the distance from the inlet to the anode, the specification of the ’494 patent uses the language “within 10 inches in any direction of the center axis of the inlet connection.” Ex. 1001, 7:61–64. Thus, the intrinsic evidence supports adopting Petitioner’s claim construction. Petitioner’s declarant, Dr. Medlin, relies on Petitioner’s proposed construction. See, e.g., Ex. 1004 ¶¶ 20 (noting that the construction “within 10 inches of the center axis of [a] hot liquid inlet” “ha[s] been adopted by Petitioner”), 96 (“the sacrificial anodes contained in each of the turbulators 2 would be placed within 10 inches of a center axis of a hot liquid inlet to the radiator of Tomosada”), 144 (“A POSITA would understand from Figure 1 that the sacrificial anode 14 is within 10 inches of a center axis of a hot liquid inlet”), 267 (“These teachings would further motivate a POSITA to located the sacrificial anode 12 within 10 inches of a center axis of the hot liquid inlet.”). This support for Petitioner’s proposed construction provides further reason for us to adopt it. Because it is supported by the intrinsic evidence of record, because Patent Owner proposes no alternative construction, and because Petitioner’s expert supports it, we adopt the construction of “within 10 inches of a hot liquid inlet to the radiator” that Petitioner proposes. Thus, we construe this term as “within 10 inches of the center axis of a hot liquid inlet to the radiator.” In other words, when discussing the distance between a hot liquid inlet and a sacrificial anode, we interpret “hot liquid inlet” as “center axis of the hot liquid inlet.”” slip op. at 5
- BurdenNot shown unpatentable
“Inherency may be relied upon in arguing either anticipation or obviousness. Schering, 339 F.3d at 1377 (applying inherency in an anticipation context); Par Pharma. Inc. v. TWI Pharma., Inc., 773 F.3d 1186, 1195–96 (Fed. Cir. 2014) (applying inherency in an obviousness context). In both cases, however, “[t]he mere fact that a certain thing may result from a given set of circumstances is not sufficient.” Therasense, Inc. v. Becton, Dickinson & Co., 593 F.3d 1325, 1332 (Fed. Cir. 2010). Instead, “the limitation at issue necessarily must be present, or the natural result of the combination of elements expressly disclosed by the prior art.” Par Pharma., 773 F.3d at 1195–96. Here, Petitioner has not shown sufficiently that, in Godefroy, the sacrificial anode necessarily is placed within 10 inches of the center axis of the hot liquid inlet. Dr. Medlin testifies that Figure 1 of Godefroy shows that “an entirety . . . or at least a significant portion of the sacrificial anode 14, is within 10 inches of a center axis of the inlet.” Ex. 1004 ¶ 144. But we cannot say that Figure 1 of Godefroy is clear on its face, or reasonably suggests, that this is necessarily the case. There are no dimensions shown on Figure 1, so it is unclear from the figure what the diameter of pipe 12 is. If that diameter is larger than 20 inches, then it simply is untrue that “sacrificial anode 14 is . . . necessarily placed within 10 inches of a center axis of a hot liquid inlet to the radiator,” as Dr. Medlin testifies. Id. ¶ 361. As noted above, neither Petitioner nor Dr. Medlin relies on the hot liquid inlet of Godefroy having any particular diameter, and Godefroy is silent as to the diameter of its inlet. Pet. 69–70; Ex. 1004 ¶¶ 144, 359–361, 381–382, 406–408; Ex. 1008, 1–15. Moreover, as Patent Owner notes, there is a wide range of sizes of radiators, including automobile radiators, available. Prelim. Resp. 3–5; Exs. 2001–2003. In the absence of any testimony or other evidence that tends to show that radiator inlet pipes necessarily have diameters less than 20 inches, Petitioner has not shown sufficiently that the diameter of Godefroy’s inlet pipe is small enough to ensure that any portion of the anode necessarily is within 10 inches of the center axis of the inlet.” slip op. at 11
Claim constructioncites Phillips - PTAB · Oct 1, 2015 · IPR2014-00714 · APJ Kevin W Cherry · IPR · Final written decision
The Board canceled claims 11, 74, and 81 and denied substitute claims 154–156 because they broadened claim scope, lacked written-description support, and were not shown patentable over Mostov.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“A petition for inter partes review must identify “all real parties in interest.” 35 U.S.C. § 312(a)(2). The Office Patent Trial Practice Guide provides guidance regarding factors to consider in determining whether a party is a real party in interest. 77 Fed. Reg. 48,756, 48,759–60 (Aug. 14, 2012). Considerations may include whether a non-party “funds and directs and controls” an IPR petition or proceeding. Id. at 48,760. Additional relevant factors include: the non-party’s relationship with the petitioner; the non-party’s relationship to the petition itself, including the nature or degree of involvement in the filing; and the nature of the entity filing the petition. Id. Generally, a party does not become a “real party-in-interest” merely through association with another party in an unrelated endeavor. Id. A party also is not considered a real party in interest in an inter partes review solely because it is a joint defendant with a petitioner in a patent infringement suit or is part of a joint defense group with a petitioner in the suit. Id. Whether a party who is not a named participant in a given proceeding is a “real party-in-interest” to that proceeding “is a highly fact-dependent question.” Id. at 48,759. There is no “bright line test.” Id. Courts invoke the term “real party-in-interest” to describe relationships and considerations sufficient to justify applying conventional principles of estoppel and preclusion. Id. Here, even assuming this contention is timely, Patent Owner has failed to provide any evidence, besides the mere fact that the other parties are co-defendants in a lawsuit or alleged infringers, to support the contention that Petitioner has failed to name all of the real parties in interest. That one fact, without any further proof of control or involvement by these parties in this proceeding, is insufficient to establish that Petitioner has failed to name” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
“ii. Petitioner’s Expert Patent Owner asks that we “dismiss [Petitioner’s] Expert Declaration and disqualify [Petitioner’s Declarant] for making and using a false writing.” PO Resp. 9. Patent Owner contends that Petitioner’s Declarant falsely claimed that certain patent applications were patents by listing them under the heading “Patents” in his Resume. Id. at 8–9. A Patent Owner Response is not the proper vehicle to seek to exclude testimony. See 37 C.F.R. § 42.64(c). Moreover, even if it were the proper vehicle, we are not persuaded that the alleged “falsehood” that Patent Owner identified—listing patent applications, which are clearly identified as such, under a heading titled “Patents”—is, in any way, misleading. Thus, we decline Patent Owner’s request that we dismiss Dr. Vishwanath’s testimony.3 C. Motion to Amend As discussed above, in the Motion to Amend, Patent Owner requests” slip op. at 12
- Skill levelSkill level petitioner adoptedDecided for petitioner
“i. Level of Ordinary Skill in the Art Neither party puts forward a succinct definition of the level of ordinary skill in the art. Petitioner’s declarant, however, has put forward a detailed discussion of various references dated before April 20064 (the date Patent Owner now alleges is the priority date) related to subject matter of the ’990 patent. See Ex. 1005 ¶¶ 20–74, 94–99. We have reviewed that discussion and the references cited in those paragraphs. We have found it accurately reflects the teachings of the references. Moreover, we agree with Petitioner’s declarant that the references are analogous to the claimed invention, and, as such, represent the level of skill in the relevant art at the time of the invention. See In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (finding that the Board did not err in concluding that the level of ordinary skill was best determined by the references of record); In re Oelrich, 579 F.2d 86, 91(CCPA 1978) (“[T]he PTO usually must evaluate . . . the level of ordinary skill solely on the cold words of the literature.”); see 4 We accept this date as the priority date only for the sake of argument. also Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“[T]he absence of specific findings on the level of skill in the art does not give rise to reversible error ‘where the prior art itself reflects an appropriate level and a need for testimony is not shown.”’).” slip op. at 13
- ScopeMotion to amend, deniedDenied
“We agree with Petitioner and find, based on the Patent Owner’s own arguments, that these terms improperly broaden the scope of the claims. As Patent Owner explains, the added language is broad enough to include the removed items, and is intended to reflect the entire genus of “monitoring equipment” and “communications devices” that “are capable of communication and capable of receiving signals.” Mot. to Amend 4, 5. Thus, the claim has been broadened to not only include the listed species that have been removed, but anything falling within the claimed genus. Accordingly, we find that this amendment impermissibly broadens the claim. As for the second change in the claim language, we find that Patent Owner has failed to show why removal of the entire passage “wherein, the communication device receives a signal via any of one or more products listed in any of the plurality of product grouping categories,” would not impermissibly broaden the scope of claim 154. The deletion of this limitation necessarily broadens the claim in that limitation’s aspect. See In re Clement, 131 F.3d 1464, 1468 (Fed. Cir. 1997) (“For example, a reissue claim that deletes a limitation or element from the patent claims is broader in that limitation’s aspect.”). Given that Patent Owner has entirely deleted this limitation and Patent Owner bears the burden of showing entitlement to the amendment, it was incumbent on Patent Owner to explain why removing this entire passage from claim 154 would not broaden the scope of the claim. See In re Bennett, 766 F.2d 524, 526 (Fed. Cir. 1985) (en banc) (“[A] claim is broadened if it is broader in any respect than the original claim, even though it may be narrowed in other respects.”).” slip op. at 17
§ 102 anticipation - PTAB · Nov 24, 2014 · PGR2014-00010 · APJ Jon B Tornquist · PGR · Order
The Board granted the parties’ joint motion and terminated PGR2014-00010 without a final decision; it also granted confidential treatment of the settlement agreement.
RulingsOther- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Granted
“Patent Owner’s preliminary response is not yet due. On November 20, 2014, the parties filed a joint motion to terminate the proceeding (Paper 7) and a copy of their written settlement agreement (Ex. 2001). Along with the motion to terminate, the parties also filed a joint motion to treat the settlement agreement as business confidential information and keep it separate from the file of U.S. Patent No. 8,598,219 (“the ’219 patent”) pursuant to 35 U.S.C. § 327(b) and 37 C.F.R § 42.74(c). Paper 8, 1.” slip op. at 2
NonePatents in suitUS 8,598,219 - PTAB · Oct 30, 2014 · IPR2014-01171 · APJ Mitchell G Weatherly · IPR · Order
The Board granted the parties’ joint motion to terminate the proceeding and the request to keep the settlement agreement confidential; no trial had been instituted.
RulingsOther- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Granted
“The parties have requested that this trial proceeding be terminated pursuant to a settlement. On October 28, 2014, we authorized the parties via e-mail to file a joint request to terminate this proceeding and to file the settlement agreement as business confidential information under 37 C.F.R. § 42.74(c). The parties filed their joint motion on October 29, 2014. Paper 15. With their motion to terminate, the parties also filed a copy of a” slip op. at 1
NonePatents in suitUS 7,021,594 - PTAB · Oct 3, 2014 · IPR2014-00162 · APJ Josiah C Cocks · IPR · Order
The Board granted the parties’ joint motion to terminate IPR2014-00162 and terminated the proceeding without a final written decision.
RulingsOther- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Granted
“settlement, and may identify independently any question of patentability. 37 C.F.R. § 42.74(a). Generally, however, the Board expects that a proceeding will terminate after the filing of a settlement agreement. See, e.g., Office Patent Trial Practice Guide, 77 Fed. Reg. 48756, 48768 (Aug. 14, 2012). A decision by the Board to institute was entered on May 13, 2014. Paper 11. TAS filed a Patent Owner Response on August 13, 2014. Paper 16. GE has not yet filed any reply. Briefing, thus, has not been completed in this proceeding. As noted above, TAS also has agreed to dismiss the litigation associated with the ’686 patent. Under the circumstances, based on the record before us, the Board determines that it is appropriate to terminate this proceeding without rendering a final written decision. See 37 C.F.R. § 42.72.” slip op. at 3
NonePatents in suitUS 6,470,686 - PTAB · Oct 3, 2014 · IPR2014-00161 · APJ Josiah C Cocks · IPR · Order
The Board granted the parties’ joint motion to terminate IPR2014-00161 without a final written decision and ordered the settlement agreement treated as business confidential.
RulingsOther- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Granted
“settlement, and may identify independently any question of patentability. 37 C.F.R. § 42.74(a). Generally, however, the Board expects that a proceeding will terminate after the filing of a settlement agreement. See, e.g., Office Patent Trial Practice Guide, 77 Fed. Reg. 48756, 48768 (Aug. 14, 2012). A decision by the Board to institute was entered on May 13, 2014. Paper 10. TAS filed a Patent Owner Response on August 13, 2014. Paper 17. GE has not yet filed any reply. Briefing, thus, has not been completed in this proceeding. As noted above, TAS also has agreed to dismiss the litigation associated with the ’065 patent. Under the circumstances, based on the record before us, the Board determines that it is appropriate to terminate this proceeding without rendering a final written decision. See 37 C.F.R. § 42.72.” slip op. at 3
NonePatents in suitUS 6,318,065 - PTAB · Sep 17, 2014 · IPR2014-00315 · APJ Lora M Green · IPR · Order
The Board granted the parties’ joint motion and terminated the proceeding after settlement; the petitioner withdrew its rehearing request.
RulingsOther- RehearingOther
“We note that we denied institution of inter partes review on July 8, 2014. Paper 14. Petitioner, however, filed a Request for Rehearing Pursuant to 37 C.F.R. § 42.71 of our decision not to institute trial, and that Request has not yet been decided. Thus, the possibility that trial may be instituted still remains. Petitioner also withdraws its Request for Rehearing in view of the joint motion to terminate. Based on the facts of this case, it is appropriate to enter judgment.2 Therefore, the joint motion to terminate the proceeding is GRANTED.” slip op. at 2
NonePatents in suitUS 8,318,738 - PTAB · Sep 12, 2014 · IPR2014-00551 · APJ Scott E Kamholz · IPR · Order
The Board granted the parties’ joint motion and terminated the proceeding as to all parties because they settled and the proceeding was at an early stage.
RulingsOther- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Granted
“While the parties may agree to settle their issues related to the involved patent, the Board is not a party to the settlement and may determine independently any question of patentability. 37 C.F.R. § 42.74(a).” slip op. at 2
- Adverse judgmentOther
“In view of the parties’ settlement agreement made in connection with the termination in accordance with 35 U.S.C. § 317(b) and 37 C.F.R. § 42.74(b), we determine that it is appropriate to terminate the involvement of Petitioner. Moreover, we determine that it also is appropriate to terminate the proceeding with respect to Patent Owner, because of the early stage of the proceeding. As a result, it is appropriate to enter judgment in the form of termination. See 37 C.F.R. § 42.2. Accordingly, it is ORDERED that the joint motion to terminate IPR2013-00551 is granted, and this proceeding is hereby terminated as to all parties, including Petitioner Apex Medical Corp. and Patent Owner ResMed Limited; and” slip op. at 3
None
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.