- Fluidmaster, Inc. v. Danco, Inc.All claims unpatentablePTAB · Mar 11, 2026 · IPR2024-00635 · APJ Meredith C Petravick · IPR · Final written decision
The majority held claims 1–14 unpatentable under §103 over Guoxin, Ho, and the Quick Connection Art; one judge dissented as to claims 8, 9, 12, and 13.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“A person of ordinary skill in the art (“POSITA”) with respect to the subject matter of the ’698 patent at the time of the priority date, March 11, 2004, would have had an undergraduate degree in mechanical engineering, or other technical training in product design or equivalent work experience. This person would also possess at least one year of experience in developing and/or evaluating mechanical aspects of fluid systems. I consider myself a person of ordinary skill in the art under this definition. Ex. 1004 ¶ 28. Patent Owner argues: A POSITA in the field to which the ’698 Patent is directed would have had at least a Bachelor of Science degree in mechanical engineering or a related field or, as a substitute, at least two years of work or research experience in the design or development of toilet products, parts, and accessories. PO Resp. 6. We adopt Patent Owner’s proposed definition of a POSITA, as it is consistent with the ’698 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). However, we see no material difference between the level of skill proposed by Patent Owner and that proposed by Petitioner and Dr. Cameron such that our determinations would be the same under either proposed level of skill.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningDecided for petitioner
“Patent Owner asserts that, because each of the Flow Limitations relate to water flow through the bowl fill valve, these limitations require adjusting the flow rate of water exiting the flow valve. PO Resp. 15–17 (citing Ex. 2013 ¶ 97); See also PO Sur-Reply 7. Petitioner responds that “the claim language of the ’698 Patent discusses adjusting the water flow, not specifically the ‘flow rate.’” Pet. Reply 13. We are not persuaded by Patent Owner, and the conclusory testimony of Mr. Jobin (Ex. 2013 ¶ 97), that because the Flow Limitations “relate” to water flow through the bowl fill valve, that this necessarily means that the flow rate must be adjusted. As Petitioner points out, neither the term “flowrate” nor any similar term appears in any of the Flow Limitations. Thus, the plain language of the Flow Limitations requires that, contrary to Patent Owner’s position, the claim limitation should not be restricted to adjustments to “flow rate.”” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“Petitioner argues that Limitations 8B and 12B are directed to the configuration or structure of the bowl fill valve outlet port. Pet. Reply 2–4. According to Petitioner, because Limitations 8B and 12B do recite an overflow tube, the overflow tube is not separately claimed and is recited solely to define the function of the outlet port on the bowl fill valve. Id. at 3. Petitioner, thus, argues that an overflow tube is not separately claimed as a structural element, and that, to meet Limitations 8B and 12B, it is sufficient to show that the prior art discloses a bowl fill valve with an outlet port that is configured to attach directly to a tube that provides water from the outlet port to an overflow tube. Id. at 4. In contrast, Patent Owner argues that Limitations 8B and 12B separately claim the overflow tube, and that Petitioner must show that the prior art discloses a tube that transfers water from the bowl fill valve outlet port to the toilet tank overflow tube. PO Resp. 10–11; PO Sur-reply 2–3. We disagree with Patent Owner, because claims 8 and 12, on their face, require “bowl fill valve outlet port,” but do not require or recite an “overflow tube” as an element of the claimed “bowl fill valve.” When a structure is claimed as “configured to” perform a particular function, it generally requires a structure that is designed to perform the particular function claimed, i.e., it requires more than the mere capability of performing that function. See Aspex Eyewear, Inc. v. Marchon Eyewear, Inc., 672 F.3d 1335, 1349 (Fed. Cir. 2012) (claim language including the phrase “adapted to” is to be construed consistent with “configured to” language and requires that the structure must be “designed or configured to accomplish the specified objective, not simply that [it] can be made to serve that purpose.”); see also In re Giannelli, 739 F.3d 1375, 1379 (Fed. Cir. 2014). The plain language of Limitations 8B and 12B is clearly directed to the configuration of the bowl fill valve outlet port, in that these limitations recite “a bowl fill valve outlet port configured to.”8 The recited function is “attach directly to a tube that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube is recited as part of the function in a clause identifying the tube to which the bowl fill valve outlet port is configured to attached — “that provides water from the bowl fill valve outlet port to an overflow tube.” The overflow tube, thus, is recited as part of the function defining the required structure of the bowl fill outlet port and is not separately claimed.” slip op. at 16
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“1. Petitioner’s Contentions Petitioner contends that the combination of Guoxin, Ho, and the Quick Connection Art teaches all of the limitations of claims 1–14 and provides a mapping showing where each claim limitation is found in the prior art. Pet. 21–59. We have reviewed the Petition’s mapping and determine that the Petition sufficiently shows that each limitation of claims 1–14 is disclosed by the combination of Guoxin, Ho, and the Quick Connection Art. Further, we have reviewed Petitioner’s rationale for combining the prior art and determine that the Petition sufficiently shows that it would have been obvious to a POSITA to combine Guoxin, Ho, and the Quick Connection Art.” slip op. at 23
Patent outcomesUS 10,934,698 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,934,698 - Tommy John, Inc. v. Pakage Apparel, Inc.All claims unpatentablePTAB · Feb 12, 2026 · IPR2024-01163 · APJ Robert J Silverman · IPR · Final written decision
The Board held claims 1–13, 15, and 16 unpatentable as obvious under § 103 over the identified combinations of Kitsch, Brocks, and Carrillo.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Accordingly, for purposes of this Decision, we adopt Petitioner’s” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“21; 4:1:13–22. Accordingly, Kitsch and Brocks have similar goals, with respect to formation of a secure pouch for containing the genitals, for which each reference discloses a distinct technical solution. Thus, a POSITA would have regarded the application of Brocks’ familiar and effective gathering technique to Kitsch’s side panels as a viable approach for improving a supportive pouch, and would have expected such combination of teachings to achieve the structural benefit used in Brocks. See Pet. 25–27 (citing, inter alia, Ex. 1005 ¶¶ 68–72). In other words, a POSITA would have had a reasonable expectation that the combination of Kitsch and Brocks, as discussed above, would result in what is recited in limitation 1[g].” slip op. at 44
Patent outcomesUS 10,834,974 unpatentable§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,834,974 - Mobileye Global, Inc. / ZF Active Safety And Electronics US LLC v. Facet Technology Corp.Some claims unpatentablePTAB · Jan 23, 2026 · IPR2025-00749 · APJ Sean P O’Hanlon · IPR · Final written decision
Claims 1–4 and 8–13 are unpatentable as obvious over Gallagher and Schofield; claims 5–7 and 14–16 were not shown unpatentable on the asserted combinations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“skilled artisan would have, with Petitioner contending four years and Patent Owner contending two years. Patent Owner’s witness, Dr. Papanikolopoulos, does not provide an explanation for his opinion or support his definition of the level of ordinary skill with citations to evidence. See Ex. 2023 ¶ 57 (“In my opinion, [Petitioner’s definition] is an excessive level of ordinary skill in the art, and I believe instead [an ordinarily skilled artisan] would more likely have two years of experience rather than four years.”). On the other hand, Petitioner’s witness, Dr. Thorpe, does provide an explanation for his opinion, explaining that his assertion that four years of experience is required is based on the state of the art, typical undergraduate curricula, and his supervision of doctoral students. Ex. 1030 ¶ 21. Based on the arguments presented and the cited references, we find Petitioner’s definition of the level of ordinary skill reasonable and for purposes of this Decision, adopt it as our own. We note that we would reach the same conclusions under either proposed standard.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“As a general rule, unless the steps of a method claim actually recite an order, the steps are not ordinarily construed to require one.” Mformation Techs., Inc. v. Rsch. in Motion Ltd., 764 F.3d 1392, 1398 (Fed. Cir. 2014) (citation modified). “However, a claim requires an ordering of steps when the claim language, as a matter of logic or grammar, requires that the steps be performed in the order written, or the specification directly or implicitly requires an order of steps.” Id. (cleaned up). “[O]rdinarily in process claims steps taken concurrently are the equivalent of steps taken successively.” In re White, 39 F.2d 974, 975 (CCPA 1930); see also Cybersettle, 243 F. App’x. at 609 (finding “the step of calculating the differences between demands and offers can occur concurrently with the [next enumerated step of] receipt of multiple demands and offers” and “the testing step of ‘determining whether any of the differences fall within the predetermined settlement range’ may occur concurrently with the receipt and comparison of the bids” (citation modified)). This is especially true here, given that the recitations at issue are functional language in an apparatus (system) claim. We further agree with Petitioner that the ’328 patent discloses such concurrent performance of these steps: Either concurrent with or subsequent to the identification of road signs 30 and generation of asset management database 24, the computer processor 22 evaluates that portion 32 of each video frame or image that depicts a road sign 30 to determine a set of color values 40, 42 for each of a plurality of colors on the road sign 32. A retroreflectivity value is generated for each color portion 34, 36 on each frame of the tagged videostream 20 containing the road sign 30 that represents a different color value 40, 42. slip op. at 13
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Petitioner is correct to the extent that it need not show that “the features of [Schofield] may be bodily incorporated into the structure of [Gallagher],” but Petitioner must prove that “a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention.” Allied Erecting, 825 F.3d at 1381. For claim 9, Petitioner proposes to modify Gallagher’s system to use “Schofield’s determination of a light source’s location within a field of view” in Gallagher’s system. Pet. 23. Thus, Petitioner’s combination does not require the combination of Gallagher’s and Schofield’s sensors into a single system, and Patent Owner’s “sensor fusion” argument is inapposite. See Tr. 48:8–49:6 (Patent Owner’s counsel confirming that the problem of “sensor fusion” stems from combining disparate sensors in a single system). As noted above, Schofield teaches considering the relative location of the light source in determining whether the light source is from headlights or taillights (that is, an object of interest). See Ex. 1006, 9:26–35. We are persuaded that an ordinarily skilled artisan would be motivated to use this teaching in Gallagher’s device to help distinguish between road markers that are arranged side-by-side and have a reasonable expectation of success in doing so. See Ex. 1005 ¶ 40; Ex. 1003 ¶¶ 77 (“[An ordinarily skilled artisan] would have seen Schofield’s determination of a light source’s location within the field of view as advantageous because it would have allowed Gallagher’s computer to associate the measured reflectance level with the appropriate road marker.”), 79 (“[I]mplementing this determination would have required [an ordinarily skilled artisan] to implement only conventional techniques of image processing (identifying a location of a particular pixel within an array), which was well known by [an ordinarily skilled artisan], to predictably yield the result of the location within a field of view indicating an intensity value associated with a road marker. Given that Schofield and Gallagher disclose similar types of arrays, this combination would have merely required the use of Schofield’s known technique to improve Gallagher’s similar device in the same way.”).” slip op. at 30
- Obviousness (§103) › Analogous artNon analogous artNot shown unpatentable
“A reference qualifies as prior art for a determination under § 103 when it is analogous to the claimed invention. In re Clay, 966 F.2d 656, 658 (Fed. Cir. 1992). Two separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed, and (2) if the reference is not within the field of the inventor’s endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (citing In re Deminski, 796 F.2d 436, 442 (Fed. Cir. 1986)).” slip op. at 49
Patent outcomesUS 9,671,328 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,671,328 - Provisur Technologies, Inc. v. Weber Food Technology GmbHAll claims unpatentablePTAB · May 28, 2025 · IPR2024-00235 · APJ Carl M Defranco · IPR · Final written decision
Claims 1–6, 8, 10, and 14–16 are unpatentable as anticipated by Young and obvious over Young and Norrie; the Johnson and Belk ground was not reached.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Provisur proposes that one of ordinary skill in the art would have had: (1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field); or (2) at least seven years of experience working as an engineer (or similar role) on food processing and/or packaging systems (or in a similar field). Pet. 12. Weber does not contest Provisur’s framing of the level of ordinary skill in the art. See generally PO Resp. There being no dispute, we adopt Provisur’s definition of the level of skill in the art.” slip op. at 5
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Provisur construes the claim terms “according to their plain and ordinary meanings as understood by a [person of ordinary skill in the art] in view of the specification and prosecution history” and posits that “[n]o terms require an explicit construction to resolve the unpatentability controversy between the parties here.” Pet. 13. Weber appears to agree, stating in the related district court action that “most of [its] patent claims are plain and ordinary . . . [t]hey’re not difficult or complex claims or claim terms.” Ex. 3 US 5,514,032, issued May 7, 1996 (Ex. 1004, “Young”). 4 US 4,979,269, issued Dec. 25, 1990 (Ex. 1005, “Norrie”). 5 US 6,929,540 B2, issued Aug. 16, 2005 (Ex. 1006, “Johnson”). 6 US 6,198,834 B1, issued Mar. 6, 2001 (Ex. 1007, “Belk”). 1028, 5. This being the case, we do not find the need to expressly construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (confirming that the Board need not construe claim terms where their construction is not material to the dispute).” slip op. at 5
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable
“without first determining how much fat existed to begin with, i.e., prior to the side of meat being trimmed. But, as Provisur correctly notes, Weber ignores what one skilled in the art reasonably would have understood from reading Young’s disclosure as a whole. See Pet. 30–36 (citing Ex. 1003 ¶¶ 104–106, 109–112); Pet. Reply 2–12. When that is done, one skilled in the art would have understood that a necessary premise of Young’s determination of the thickness of fat to remain on the loin is knowing the thickness of the fat to begin with, which Young’s imaging system 190 and imaging processing routine 240 determine by first analyzing a series of “fat/lean separation lines” and “edge lines” in the side of meat being trimmed. Pet. 30–32 (citing Ex. 1004, 17:34–62, 18:33–56, 22:53–24:38, Figs. 2, 13); Pet. Reply 3–7 (citing portions of same evidence). More specifically, as described in Young (and articulated by Provisur), the side of meat is placed fat side down on a product support, i.e., platen 20. See Ex. 1004, 7:16–21, Figs. 1, 2. Using several cameras—top plan camera 196, end view camera 197, and fat line camera 198—Young’s imaging system 190 acquires multiple images of the side of meat from various angles and under various lighting conditions to “provide image data regarding each side of [meat].” See id. at 17:34–18:56. That image data is then used by Young’s image processing routine 240 to generate a series of demarcation lines on the side of meat, including: (1) fat/lean separation lines (representing the interface between the loin meat and the fat layer along top, side, and end views of the meat product; and (2) edge lines (representing lines along the outer surface of the meat product). See id. at 22:53–23:67, Figs. 10, 13 (Blocks 242, 246, 250, 254). In addition, “a plurality of points (preferably 20) are generated for each of the fat/lean separation and edge lines using known pattern matching routines.” Id. at 23:28–30, Fig. 13 (Blocks 244, 248, 252, 256); see also id. at 23:61–63 (essentially same). The fat/lean separation and edge lines (and points therein) generated by Young’s image processing routine 240 are then used to calculate certain dimensions and characteristics of the side of meat, such as height, length, and width. Id. at 24:10–22, Fig. 13 (Block 258). As Provisur’s expert credibly testifies, one skilled in the art would have understood that the dimension from the fat/lean separation line to the edge line along the outer surface represents the thickness of fat cover on the side of meat, i.e., before the fat is trimmed. See Ex. 1003 ¶ 106. Insofar as how that dimension is used, Young states that controller 172 uses “dynamic (real time) image data” of the fat/lean separation and edge lines “to dynamically modify the cutting profile of the loin knife assembly 100 so that the assembly follows a fixed distance from the separation line to provide the optimum fat cover for the loin.” Ex. 1004, 18:32–45; see also id. at 17:48–52 (describing “real time processor” for “image processing routines”). Notably, according to Young, the “fixed distance” represents the “desired” thickness of fat that remains on the loin, after trimming, and “sufficiently keeps the loin from drying out, but doesn’t make the loin look too fat,” although “[o]ther fat thicknesses may be desired in the alternative.” Id. at 20:60–66; see also id. at 10:39–42 (“Through control of the knife blade along several axes, assembly 100 preferably produces an optimum separation between loin and belly, with a desired fat covering left on the loin.” (emphases added)). Because the desired thickness of fat cover is what remains on the loin” slip op. at 9
- Strike new argumentNew argument consideredDecided for patent owner
“argument that Weber considers vital to its dispute of Provisur’s showing for the claimed fat thickness determination. During oral hearing, Weber repeatedly argued that Provisur changed theories midstream, i.e., between the time of the petition and the hearing. See Hrg. Tr. 22:18–24:47; see also id. at 31:14–22, 33:8–18, 34:16–20, 49:17–50:15, 54:16–56:25 (repeating same argument). More specifically, according to Weber, Provisur originally relied only on image data from Young’s “top view” camera as processed in “block 246” of Young’s image processing routine 240 when showing how Young meets the claimed fat thickness determination, whereas now Provisur relies on image data from Young’s “end view” cameras as processed in “Block 254.” Compare PO Sur-Reply 3–6 (focusing on Young’s “top view camera” in “block 246”), with Hrg. Tr. 27:4–16 (“[Block] 246, which is what they relied on, is processing images from the top-view camera in Young’s system. It is generating lines from the top-view camera in Young’s system. What they are newly trying to rely on today, for the first time, is Block 254 that is discussed toward the bottom of column 23 in Young, and that analyzes different images from a different camera. It is the end camera. It generates different lines. It demonstrates an end fat/lean line and an end edge line. Prior to today’s hearing, neither Petitioner, nor its expert, had ever discussed Block 254. You will not find a single reference to 254 in their papers, nor have they discussed the end edge line. It is completely new today. It finds absolutely no support in the record.” (emphases added)). We disagree with Weber’s contention. As shown and described in the petition, Provisur relies on more than simply Young’s “top view” camera and “block 246.” See Pet. 29–31. Rather, in its petition, Provisur annotates Young’s Figure 2 to show that image data from all three cameras of “imaging system 190”—“top plan camera 196, end view camera 197, [and] fat line camera 198”—play a role in the determination of fat thickness.8 Id. at 30. Moreover, Provisur cites the entire process depicted in “Figure 13” and described in columns “22:53–24:38” of Young as critical to the determination. Id. at 31. Those cited portions of Young involve not only the analysis of fat/lean and edge lines from “top view” images (block 246), but also the analysis of fat/lean and edge lines from “end view” images (blocks 250 and 254). See Ex. 1004, 23:12–24:13. In other words, Provisur’s showing for the claimed fat thickness determination is based on Young’s collective analysis of all those images. Indeed, Provisur’s expert confirms as much when confronted by Weber on cross-examination— Q. How does [Young] use the other cameras to identify that fat/lean separation line? A. Again, this is a -- this is a three-dimensional product that’s not regular, and all the views basically are needed to be able to describe that complex three-dimensional shape, so that the knife will be able to cut at that -- at that line, offset by whatever desired thickness there is, on that three-dimensional shape. Ex. 2006, 25:15–27:19 (emphasis added). 8 Indeed, contrary to Weber’s assertion, Provisur highlights “fat lean separation camera 198,” not top view camera 196, as most critical to the determination of fat thickness. Pet. 31. In the end, we reject the notion that Provisur changed theories” slip op. at 12
Patent outcomesUS 8,529,321 unpatentableClaim construction§ 102 anticipation§ 103 obviousnessPatents in suitUS 8,529,321 - Innoscience (Zhuhai) Technology Company, Ltd. / Innoscience America, Inc. v. Efficient Power Conversion CorporationAll claims unpatentablePTAB · Mar 25, 2025 · IPR2023-01384 · APJ Jeffrey W Abraham · IPR · Final written decision
Claims 1–7 are unpatentable as obvious over Yoshida and Saxler; the Board did not reach the alternative grounds.
RulingsFinal written decision- Skill levelOther
“In light of the record before us, we determine that we do not need to reach a specific finding regarding the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“In the Institution Decision, we declined to adopt Petitioner’s proposed construction of the “side surfaces” limitation and determined that it was not necessary to further construe this term because “[t]he parties do not dispute that the language ‘side surfaces extending horizontally’ encompasses a gate material with sloped side surfaces as depicted in Figure 5 of the ’335 patent.” Inst. Dec. 11–16 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). We invited the parties to address this limitation further during the course of this trial, but neither party provided additional evidence or argument regarding the “side surfaces” limitation. Inst. Dec. 16; see generally PO Resp.; Reply; Sur-reply. Accordingly, we maintain our determination from the Institution Decision that we do not need to construe the “side surfaces” limitation. Inst. Dec. 15– 16.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“This evidence, particularly the language in the ’335 patent itself, undermines Patent Owner’s argument that “[t]he process for forming gate ledges using separate masks instead of the self-aligned process disclosed in the ’335 patent cannot produce ledges that are ‘substantially symmetric.’” PO Resp. 39 (emphasis added); see also PO Resp. 42–43 (arguing that a gate structure with ledges having substantially equal widths is “not achievable” without using a single photo-mask process). We have considered the evidence presented by Patent Owner and Dr. Schubert in support of Patent Owner’s arguments. PO Resp. 38–43; Ex. 2005 ¶¶ 49–51. We, however, are unable to discern sufficient evidence supporting a conclusion that using separate masks cannot produce ledges that are substantially symmetric, particularly when the ’335 patent suggests otherwise. See Ex. 1001, 4:60– 63 (referring only to the “possibility of misalignment”). Even if, as Patent Owner and Dr. Schubert contend, misalignment “naturally” occurs when using a two-mask process, that does not foreclose the possibility that the” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“It is well settled that “[a] reference does not teach away . . . if it merely expresses a general preference for an alternative invention but does not ‘criticize, discredit or otherwise discourage’ investigation into the invention claimed.” DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed. Cir. 2009) (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Furthermore, “teaching that a composition may be optimal or standard does not criticize, discredit, or otherwise discourage” slip op. at 31
Patent outcomesUS 10,312,335 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,312,335 - Amphenol Corp. v. PPC Broadband, Inc.All claims unpatentablePTAB · Feb 19, 2025 · IPR2023-01363 · APJ Jon B Tornquist · IPR · Final written decision
Claims 1, 2, and 10–13 are unpatentable as obvious over the stated combinations of Holmberg, Battey, Blankenship, and Cowen.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least 1 year of experience related to communication networks or the equivalent.” Pet. 7. Petitioner further contends that “[a]dditional education could substitute for professional experience or significant experience in the field could substitute for formal education.” Id. at 7–8 (citing Ex. 1003 ¶¶ 29–31). Dr. Eldering agrees that one of ordinary skill in the art “would have had at least a bachelor’s degree in electrical engineering, computer engineering, or a related field, and at least one year of experience related to communication networks or the equivalent.” Ex. 2001 ¶ 24. According to Dr. Eldering, “[a] person with less relevant practical experience but with additional experience would also qualify.” Id. Patent Owner contends that” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Although Patent Owner disagrees with Petitioner’s construction, it contends “the Board need not resolve this claim construction dispute because Petitioner’s proposed grounds 1-5 are all insufficient under either construction.” PO Resp. 19. Upon review of the parties’ arguments and the prior art of record, we determine that no claim terms require express construction for purposes of this decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For example, we discuss below in Section III.G why we do not reach the claim construction issue presented by Petitioner.” slip op. at 11
- Expert testimonyPetitioner expert creditedDecided for petitioner
“We find that Holmberg expressly contemplates using its wall box within multi-dwelling units, notes that multi-dwelling wall boxes in the prior art were “typically provided” on every floor, and discloses that the multi-dwelling wall boxes would contain optical couplings for each resident on a given floor. Ex. 1004 ¶¶ 7, 34; Pet. Reply 8–10. In view of these disclosures, we credit the testimony of Dr. Kiaei that one of ordinary skill in the art would have sought to use Holmberg’s wall box in multi-dwelling units and would have seen a need to access the area behind spice tray 230 to connect and disconnect subscribers. Ex. 1003 ¶ 92; Ex. 1033 ¶¶ 7–8. Moreover, even if Holmberg were limited to mid-span locations and distributing drop cables, as opposed to distribution cables for individual subscribers, as asserted by Patent Owner, Patent Owner does not dispute that a technician would still need periodic access to the area behind splice tray 230 in these mid-span devices. Tr. 38:3–39:1 (counsel agreeing that one would need to access the area behind splice tray 230 in Holmberg, albeit in “rare occasions”); Ex. 1003 ¶¶ 90–92; Ex. 1033 ¶¶ 7–8. Thus, whether used in the manner contemplated by Petitioner or Patent Owner, Petitioner persuasively demonstrates that access to the space behind splice tray 230 in Holmberg would be necessary. With access behind splice tray 230 required, Petitioner persuasively demonstrates that one of ordinary skill in the art would have seen a benefit to replacing Holmberg’s fasteners or screws with a hinged connection, such as that disclosed in Battey, to allow easier access to the area behind the splice tray. Pet. 41 (citing Ex. 1005 ¶ 39 (disclosing that a rotatable splice tray or shelf would “provide[] full and convenient access to the splice tray”)). First, Petitioner and Dr. Kiaei persuasively demonstrate that once the fibers of Holmberg are routed from behind splice tray 230 and the distribution cables spooled on this tray, a technician could not reasonably access fiber optic cables stored behind splice tray 230 without releasing or opening splice tray 230. Pet. Reply 14–15 (citing Ex. 1023, 60:20–61:15); Ex. 1033 ¶¶ 31–32. Second, Petitioner persuasively demonstrates that without a hinged connection, the technician would have to either hold the splice tray of Holmberg with one hand while performing the necessary routing and splicing steps, two screws would need to remain in place (essentially replicating a hinge), or the tray would have to be left to dangle, supported only by the routed and spliced fibers. Pet. Reply 19–20.” slip op. at 22
- Strike new argumentNew argument consideredDecided for petitioner
“Allegedly New Arguments on Reply Patent Owner contends that Petitioner’s arguments regarding the benefits of a hinged connection when performing the splicing and routing steps should be dismissed or ignored because they were improperly raised for the first time on reply. Sur-reply 19–20. We disagree. The Petition asserts that one of ordinary skill in the art would have sought to add a hinged connection, such as that disclosed in Battey, in Holmberg and would have seen a benefit to so doing. Pet. 40–44. Petitioner did not change its proposed combination or its stated rationale in its Reply. Rather, in response to Patent Owner’s counter-arguments, Petitioner expands upon the benefits of its proposed combination, i.e., the substitution of a hinged connection in place of fasteners. Pet. Reply 15–21. This is permissible, as a reply may properly expand on or extend previously raised arguments relating to the motivation to make the proposed changes to the prior art. See Rembrandt Diagnostics, LP v. Alere, Inc., 76 F.4th 1376, 1385 (Fed. Cir. 2023) (explaining that the reply arguments properly relied on the same legal ground, the same prior art references, and same legal argument—the motivation to make the proposed changes to the prior art reference).” slip op. at 25
Patent outcomesUS 9,008,483 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 9,008,483 - Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision
Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15
Patent outcomesUS 7,749,641 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - Opticis Co., Ltd. v. Inneos LLCAll claims unpatentablePTAB · Jan 29, 2025 · IPR2023-01256 · APJ Terry J Owens · IPR · Final written decision
Claims 1, 2, 6, 7, and 9 are unpatentable as obvious over Kurita and Lemoff, with the Board declining to reach the remaining grounds.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“We accept the level of ordinary skill in the art stated by Petitioner and agreed with by Patent Owner with the exception of the open-ended language appears consistent with the ’416 patent and the prior art of record.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“describe elements that are not affirmatively recited in the claims, and in view of the “bedrock principle of patent law that the claims of a patent define the invention,” we conclude that none of the unrecited limitations identified by Patent Owner are required by the claims. See Thorner v. Sony Entm’t Am. LLC, 669 F.3d 1362, 1366 (Fed. Cir. 2012) (explaining that the standard for disavowal is “exacting,” and the use of “the present invention” is not necessarily sufficient to meet this standard).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“art would not have modified Kurita in view of Lemoff because Lemoff positions the signal emitters near the fiber to emulate WDM without the need for an external optical multiplexer or a similar device and discourages using optical wavelength multiplexers for short distances because the complexity of the design is often cost prohibitive (PO Resp. 47–48), Lemoff does not appear to limit the usefulness of the fiber connector to any particular optical signal transmission distance. Petitioner relies upon Lemoff for a suggestion to combine Lemoff’s fiber connector configuration teachings with Kurita’s multiplexer teachings to enable fibers to be plugged Fig. 2) (Pet 29, 31; Reply 17–18). Regarding Patent Owner’s argument that one of ordinary skill in the art would not have combined Lemoff’s receptacle and ferrule with discrete components in Kurita because the fiber would need to be manually fixed and aligned with or without a ferrule and, therefore, would serve no purpose (PO Resp. 48), Lemoff’s fiber connector appears to fix and align the fiber adequately for wavelength division multiplexing without manual fixation or alignment being required (Ex. 1006, 5:65–6:2, Fig. 2; Reply 18). The challenged claims do not require any greater degree of fixing and alignment than that provided by Lemoff’s fiber connector. Regarding Patent Owner argument that Lemoff’s device is not physically combinable with Kurita’s WDM multiplexer due to Lemoff’s device’s small size (PO Resp. 47–48; Reply 17–18), “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference.... Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art” (In re Keller, 642 F.2d 413, 425 (CCPA 1981)). Accordingly, we are not persuaded by Patent Owner’s argument.” slip op. at 26
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“stopped single optical fiber because fixing it in place does not passively align it with the optical components (PO Resp. at 35–37) is not persuasive because fixing Kurita’s fiber (40) in place in accord with Lemoff’s teaching regarding the ferrule (255) inserted until being stopped by the receptacle (260) (Ex. 1006, 5:50–6:15, Fig. 2) would align Kurita’s optical array (20), and lens (30)) (Ex. 1004 Fig. 3) passively in the same manner that Lemoff’s ferrule (255), after being inserted until stopped by the receptacle (260), passively aligns the optical fiber (250) with the optical components (optical imaging element 220 and light emitters within emission apertures 120) (Ex. 1006, 5:50–6:15, Fig. 2; Reply 15–16). Regarding Patent Owner’s argument that the light from each of Kurita’s lasers (11) depicted in Figure 3 cannot pass through a separate focusing lens (30) pie shaped sector because the lasers (11) and collimating lenses (21) are arranged linearly rather than being arranged about a circular axis (PO Resp. at 37–42), we do not agree. Claim 1 requires “focusing means having n separate radial sectors on its surface, and each of said n collimated beams passes through a separate one of said n sectors of said focusing means” (Ex. 1001, 5:34–37), claim 2 requires “four lasers and four collimating lenses are each formed in a two-dimensional, two by two array [centered on the focal axis of lens 30], wherein said focusing means is a single focusing lens, and wherein each radial sector is a pie-shaped quadrant” (id. at 5:41–44), and claim 7 requires “focusing means having four separate quadrants on its surface, and each of said four collimated beams passes through a separate one of said quadrants of said focusing means” (id. at 6:35–38). Kurita meets those claim requirements. Kurita’s two by two array (10A) of lasers (11), collimating lens (21) array (20), and focusing lens (30) are shown in Kurita’s Figure 3 (cropped) as follows: The image is a portion of Kurita’s Figure 3 showing Kurita’s laser array, collimating lens array, and focusing lens (30). Relative to a point at the center of the laser array (10A) or the collimating lens array (20), each laser (11) and each collimating lens (21) is in a separate quadrant that can be a quadrant of a circle (pie-shape) on lens 30 (Reply 12– 13, Ex. 1003 ¶¶ 85–91).” slip op. at 23
Patent outcomesUS 7,198,416 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,198,416 - Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641 - Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentablePTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision
Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21
Patent outcomesUS 7,749,641 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 7,749,641
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.