• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Adobe Inc. v. Jonathan E. JaffeNo claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01352 · APJ Bach V Hoang · IPR · Final written decision

  Claims 1–6 were not shown unpatentable under any asserted §103 ground because the references did not teach monitoring the physical coupling between the sensor and memory.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The Institution Decision adopted and applied Petitioner’s proposed level of ordinary skill because Petitioner’s “definition generally comports with the level of skill necessary to understand and implement the teachings” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “The parties present various claim construction arguments, disputing the meaning of three limitations recited in claim 1: “a sensor, which is tightly coupled to said memory”; “monitoring the integrity of the tight coupling between said memory and said sensor”; and “based on.” See Pet. 9–14; PO Resp. 5–12; Pet. Reply 4–9; PO Sur-reply 4–11. For purposes of this Decision, we do not need to discuss the construction of “based on.” See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). As explained below, this Decision turns on whether Glass or Rieger discloses limitation [1c] reciting “monitoring the integrity of the tight coupling between said memory and said sensor.” Ex. 1001, 20:65–66; see infra §§ II.C.2, II.E.1, II.F. That limitation recites an element which overlaps with the earlier-recited limitation “a sensor, which is tightly coupled to said memory.” To reach our decision, we need only provide a limited discussion of two of the parties’ claim construction arguments. Our analysis follows.” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “said integrity is compromised, then also providing an indication of said compromised integrity.” Ex. 1001, 20:65–21:2. Although Petitioner points out that the limitation does not expressly recite “‘specifically’ monitoring the tight coupling” (Pet. Reply 8), the structure of the clause suggests that the tight coupling is specifically monitored. At a high level, the limitation is straightforward in its recitation that the integrity being monitored is “of the tight coupling” (Ex. 1001, 20:65–66 (emphasis added)), plainly suggesting that the tight coupling is specifically monitored. More granularly, breaking the relevant clause down to its grammatical parts, the clause recites a gerund (“monitoring”) acting on a direct object (“the integrity”) which is modified by a prepositional phrase (“of the tight coupling”). Notably, the object of the preposition (“of”) is “the tight coupling.” Altogether, this reads that the integrity being monitored is specifically of the tight coupling. Also, the claim recites that “if said integrity is compromised, then also providing an indication of said compromised integrity.” Therefore, from the claim language we know that the “integrity” of the tight coupling is something that may be “compromised,” which is consistent with Patent Owner’s proposed construction of determining whether the physical coupling has been “accessed or disturbed.” Petitioner’s interpretation effectively inserts additional language into the limitation such that the limitation includes monitoring the integrity of a device containing or surrounding the tight coupling, such as a camera (or camera housing), e.g., “monitoring the integrity of a camera that includes the tight coupling.” But, because the plain reading and the structure of the limitation reads that it is specifically the tight coupling’s integrity—not another physical structure, like a camera—which is being monitored, a monitored is not consistent with the language of the claim. See PO Resp. 9 (arguing that “Petitioner’s construction is improper because the claim language explicitly requires monitoring the physical coupling between the memory and the sensor as opposed to some third structure” (emphasis omitted)).” slip op. at 17

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “package 50 does not specifically monitor the integrity of the coupling between Glass’s sensor and the memory and, instead, argues that Glass detects tampering of all “the components and interconnections contained in that packaging,” e.g., control logic 44, cropper 46, compressor 47, MUX 45, code generator 48, and the various interconnections between those components. See Pet. Reply 16; Ex. 1005, 5:13–41. As explained above, we construe “monitoring the integrity of the tight coupling between said memory and said sensor” to mean determining whether the physical 7 Petitioner does not assert that a person of ordinary skill in the art would have been motivated to modify Glass’s device in any way; Petitioner solely argues that Glass teaches limitation [1c], based on Petitioner’s proposed claim construction. See Pet. 30–32 (“Glass discloses this limitation.”); Pet. Reply 16–17 (“Glass and Rieger disclose the ‘monitoring’ step.”). disturbed, which specifically requires monitoring the physical coupling between the sensor and the memory. See supra § II.C.2. As we agree with Patent Owner that this limitation requires monitoring the physical coupling between the sensor and the memory, monitoring Glass’s tamper resistant package 50 does not teach or disclose “monitoring the integrity of the tight coupling between said memory and said sensor.” Accordingly, we determine that Petitioner fails to show that Glass teaches or suggests [1c] monitoring the integrity of the tight coupling between said memory and said sensor when said at least one internal and unique parameter is generated, and, if said integrity is compromised, then also providing an indication of said compromised integrity, as required by claim 1. Consequently, we determine that Petitioner has not shown, by a preponderance of the evidence, that the subject matter of claim 1 would have been obvious over Glass.8” slip op. at 30

  Patent outcomesUS 6,757,828 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 6,757,828
• Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentable
  PTAB · Jan 16, 2026 · IPR2022-00518 · APJ Jeffrey S Smith · IPR · Remand

  Claims 1–4 and 6 are unpatentable under §103 because the prior-art combinations teach limitations 1(c) and 1(g) under the proper construction of “style.”

  RulingsRemand decision

  • RemandOther

    “As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 9

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We agree with Petitioner. As discussed above, the plain meaning of an “image object” read in light of the Specification encompasses data that defines an image, such as each of the 12 different pocket watch images of Lemay Web. Ex. 1004, 89–90. Therefore, the HTML file of Lemay Web, which specifies attributes including width, height, pause value, and repeat value of the pocket watch image objects, is “capable of being applied to more than one” image object, such as each of the 12 different pocket watch image objects described by Lemay Web. Id.” slip op. at 11

  • Strike new argumentNew argument consideredDecided for petitioner

    “We agree with Petitioner. The Board and Petitioner understood the meaning of “or” in the phrase “one or more objects” in Patent Owner’s proposed construction of style as meaning that “a style . . . can be associated with just one object.” Dec. 22; see Reply 4–5. The Federal Circuit “ultimately conclude[d] that Express Mobile’s proposed construction, with ‘or’ properly interpreted,” means “that the claimed ‘style’ must be capable of being applied to both one and more than one ‘object,’” and “remand[ed] for further proceedings in view of the correct claim construction.” Remand Opinion 13. In doing so, the Federal Circuit stated that “[i]t may be that under the correct claim construction, the Board finds that Lemay Web teaches the claimed ‘style’; however, that is still an open fact question for the Board to decide in the first instance.” Id. at n.6. Given that the Federal Circuit has ordered the Board to determine whether the prior art teaches the claimed “style” under the proper construction, we find that Petitioner’s arguments on this issue are timely.” slip op. at 6

  Patent outcomesUS 7,594,168 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 7,594,168
• Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentable
  PTAB · Jan 16, 2026 · IPR2022-00597 · APJ Jeffrey S Smith · IPR · Remand

  Claims 1–4 and 6 are unpatentable under §103 over both listed prior art combinations; Lemay Web teaches the claimed style under the Federal Circuit’s construction.

  RulingsRemand decision

  • RemandOther

    “As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We agree with Petitioner. As discussed above, the plain meaning of an “image object” read in light of the Specification encompasses data that defines an image, such as each of the 12 different pocket watch images of Lemay Web. Ex. 1004, 89–90. Therefore, the HTML file of Lemay Web, which specifies attributes including width, height, pause value, and repeat value of the pocket watch image objects, is “capable of being applied to more than one” image object, such as each of the 12 different pocket watch image objects described by Lemay Web. Id.” slip op. at 11

  • Strike new argumentNew argument consideredDecided for petitioner

    “We agree with Petitioner. The Board and Petitioner understood the meaning of “or” in the phrase “one or more objects” in Patent Owner’s proposed construction of style as meaning that “a style . . . can be associated with just one object.” Dec. 22; see Reply 4–5. The Federal Circuit “ultimately conclude[d] that Express Mobile’s proposed construction, with ‘or’ properly interpreted,” means “that the claimed ‘style’ must be capable of being applied to both one and more than one ‘object,’” and “remand[ed] for further proceedings in view of the correct claim construction.” Remand Opinion 13. In doing so, the Federal Circuit stated that “[i]t may be that under the correct claim construction, the Board finds that Lemay Web teaches the claimed ‘style’; however, that is still an open fact question for the Board to decide in the first instance.” Id. at n.6. Given that the Federal Circuit has ordered the Board to determine whether the prior art teaches the claimed “style” under the proper construction, we find that Petitioner’s arguments on this issue are timely.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “Contrary to Patent Owner’s contention, the Specification discloses, “Data that defines text button, image, paragraph, or other parent objects . . . can be stored in two-dimensional arrays (by web page and by object number).” Ex. 1001, 22:11–13 (emphasis added). The Specification further discloses that “objects . . . include colors, fonts, images, audio clips, video clips, text areas, URLs and thread objects.” Id. at 2:16–17 (emphasis added); see id. at 8:40. We highlight that the Specification’s use of “object” is consistent with a definition of “object” in the computing art at the time of the invention, which is “(2) A passive entity that contains or receives data; for example, bytes, blocks, clocks fields, files . . . .” George McDaniel, IBM Dictionary of Computing, McGraw-Hill, Inc. 1994, p. 471 (Ex. 3001). Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 8

  Patent outcomesUS 7,594,168 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 7,594,168
• Albany International Corp. v. Voith Patent GmbHInstituted
  PTAB · Dec 12, 2025 · IPR2025-01116 · APJ Christopher M Kaiser · IPR · Institution

  The Board instituted IPR of claims 1–15 on all asserted grounds, finding a reasonable likelihood that claim 1 would have been obvious over Sudre, Lee, and Penven.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “determine whether to institute an inter partes review under 35 U.S.C. § 314 and 37 C.F.R. § 42.4(a). Inter partes review may not be instituted unless “the information presented in the petition filed under [35 U.S.C.] section 311 and any response filed under [35 U.S.C.] section 313 shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). “When instituting inter partes review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.” 37 C.F.R. § 42.108(a) (2023). In other words, a decision to institute under § 314 may not institute on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018). In addition, if the Board institutes trial, it will “institute . . . on all grounds in the petition.” PTAB Consolidated Trial Practice Guide, 5–6 (Nov. 2019)1 (“CTPG”); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yes-” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had at least (1) a Bachelor’s Degree (or higher) in material science, materials engineering, mechanical engineering, textile engineering, or a related field, and (2) a minimum of two years of working experience in textiles engineering, fibers and textiles manufacturing, or a related field.” Pet. 4 (citing Ex. 1003 ¶¶ 21–22). Petitioner also argues that “[a]dditional education could substitute for professional experience, and vice versa.” Id. On the present record, Patent Owner does not contest Petitioner’s proposed level of ordinary skill. Prelim. Resp. 25–26. For purposes of this Decision, we adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’566 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Both parties argue that no claim terms require express construction at this stage of the proceeding. Pet. 3; Prelim. Resp. 26. On the present record, we agree. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent the parties’ arguments regarding unpatentability do address claim construction issues, we address these issues below.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “articulated a reason why a person of ordinary skill in the art would have combined the teachings of Sudre, Lee, and Penven. Prelim. Resp. 60–63. In particular, Patent Owner argues that a person of ordinary skill in the art “would not have been motivated to look into Penven to modify the teachings of Lee because Lee and Penven disclose substantially different structures.” Id. at 60–61. This argument does not address Petitioner’s proposed reason to combine, which looks to Lee and Penven each to modify Sudre, not to Penven to modify Lee. See Pet. 79–81. In addition, “[c]ombining the teachings of references does not involve an ability to combine their specific structures.” In re Nievelt, 482 F.2d 965, 968 (CCPA 1973). In other words, “[t]he test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference . . . . Rather, the test is what the combined teachings of the references would have suggested to those of ordinary skill in the art.” In re Keller, 642 F.2d 413, 425–26 (CCPA 1981). Petitioner provides “some articulated reasoning with some rational underpinning” to combine the teachings of Sudre with those of Lee and Penven. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007). In particular, Petitioner directs us to Sudre’s teaching of “a method for manufacturing PMC,” to Sudre’s lack of teaching of “specific parameters, such as warp thread size and spacing” to satisfy the “particular requirements” of its fabric. Pet. 79 (citing Ex. 1003 ¶¶ 248–250; Ex. 1004, 1:2–5, 6:14–17). As Petitioner points out, id. at 79–80, Lee and Penven provided yarn diameters and loop diameters that were conventional, and there is evidence of record that a person of ordinary skill in the art would have used these conventional diameters in constructing Sudre’s paper machine clothing. Ex. 1003 ¶¶ 258–261, 263–266; Ex. 1006, 3:64–66.” slip op. at 14

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,261,566
• Valve Corporation v. Ironburg Inventions Ltd.All claims unpatentable
  PTAB · Dec 2, 2025 · IPR2017-00858 · APJ Mitchell G Weatherly · IPR · Remand

  On remand, the Board held claims 18, 19, 21, 26, and 29 unpatentable as obvious over Burns and LaCelle; collateral estoppel also rendered those claims unpatentable.

  RulingsRemand decision

  • Skill levelSkill level board ownDecided for petitioner

    “understanding of a person of ordinary skill in the art at the time of the invention. Graham, 383 U.S. at 17. Valve contends that the ordinarily skilled artisan would have: a bachelor’s degree in an industrial design or engineering field, and approximately two years of relevant experience, for example. Alternatively, the same or an equivalent level of skill in the art could be obtained by end users or hobbyists who have substantial experience modifying or creating customized game controllers that include features to better suit their needs, even without any college education. Pet. 10 (citing Ex. 1009 ¶ 11). Ironburg, without expressly defining the level of ordinary skill, contends that a college degree of the type identified by Valve is not required. See Supp. PO Resp. 4–6. Ironburg notes that the level of ordinary skill is “relatively low” and the technology involved “is simple and straightforward.” Id. at 4 (citing Ex. 2016 ¶ 21). Ironburg’s contentions regarding the level of ordinary skill are consistent with Valve’s position, id. at 6, which we apply in our analysis. D. Whether Claims 18, 19, 21, 26, and 29 Are “Patentably Distinct” from” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “Ex. 1001, 10:65–11:3. In IPR2016-00948, in which we addressed similar claim limitations in a related patent, U.S. Patent 8,641,525 (Ex. 1038, the “’525 patent”),12 we found that “thickness” as used in claims such as claims 18 and 19 refers to “the dimension of the elongate member perpendicular to 12 Claims 10 and 11 of the ’525 patent contain the limitations directed to the thickness of the elongate member that substantially parallel the limitations introduced in claims 18 and 19 respectively. Compare Ex. 1038, 5:13–16, with Ex. 1001, 10:65–11:3. the surface of the elongate member (i.e., also the direction of displacement when the user activates the control function).” Ex. 1058, 10–11; Ex. 1055, 13; Ex. 1056. We interpret “thickness” the same way in this proceeding.13” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “2. Whether the Combined Teachings of Burns and LaCelle Describe All Elements of Claims 18, 19, 21, 26, and 29 Valve argues that it is “undisputed that all elements of base claim 1 are taught by the combination of Burns in view of LaCelle.” Valve Remand Br. 21 (citing Pet. 33–38; Ex. 1009 ¶¶ 23–25, 27–29). Ironburg disagrees, responding that “neither Burns nor LaCelle discloses the first control with an elongate member having a second surface arranged to be non-parallel with the back, outer surface of case.” Ironburg Remand Br. 20. Ironburg’s argument appears to rest on the issue of whether LaCelle describes its underside items as a control. We have already found that LaCelle’s underside items are controls as explained above. However, even if LaCelle did not disclose that its underside items were controls, Valve relies upon Burns as describing this aspect of claim 1. Valve Supp. Reply 9–10. Either way, Valve persuades us that the Burns and LaCelle, when combined as Valve suggests, teach every element of claim 1. In Parts II.D.1–4 above, we have also analyzed the parties’ arguments and supporting evidence on the issues of whether Burns describes the limitations introduced in each of claims 18, 19, 21, 26, and 29. For the reasons expressed above, Valve persuades us that Burns and LaCelle, when combined as Valve suggests, teach every element of dependent claims 18, 19, 21, 26, and 29. We have already concluded that Valve has proven that an ordinarily skilled artisan would have been motivated to combine teachings of Burns and LaCelle to arrive at the invention of claim 1, and those motivations also suffice for dependent claims 18, 19, 21, 26, and 29, all of which introduce limitations that we find to be described by Burns. Accordingly, we find that Valve has proven by a preponderance of evidence that the combined teachings of Burns and LaCelle render claims 18, 19, 21, 26, and 29 unpatentable as obvious.” slip op. at 25

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “On the first issue, we find that LaCelle’s underside items would have been understood by an ordinarily skilled artisan as a “control.” LaCelle describes the article illustrated in all its figures as a “game controller.” Ex. 1005, code (57). Dr. Rempel testifies that even if an ordinarily skilled artisan “were not 100% certain that the identified features on the back of the . . . LaCelle . . . controller[] are functional controls, their location and appearance certainly suggests functional back controls to one of ordinary skill in the art (even if another interpretation were also possible).” Ex. 1019 ¶ 12. The Federal Circuit has instructed us that we erred by failing to consider Dr. Rempel’s testimony supporting Valve’s Supplement Reply. Valve II, at 16. Dr. Rempel’s testimony is consistent with the manner in which LaCelle graphically depicts the items on the underside of its game controller, and we credit that testimony as being persuasive. Additionally, as we explain below, we do not find that Valve must prove that LaCelle describes its underside items as a control to support its position that an ordinarily skilled artisan would have been motivated to apply the curved shape of LaCelle’s underside items to the surface of Burns’s elongate members. On the second issue, we find that LaCelle undisputedly describes its items on the underside of the controller as being curved. On the third issue, the probative value of Valve’s Supplemental Reply argument and supporting evidence, the Federal Circuit held that we ignored important testimony establishing that an ordinarily skilled artisan “‘would have combined LaCelle and Burns’ and ‘would recognize that the predictable result of the combination — a back paddle having an end that is curved like that of LaCelle — could have better coupling with the user’s finger.’” Id., at 17–18 (quoting Ex. 1019 ¶ 39 with added emphasis). The Federal Circuit also refocused our obviousness inquiry on “whether a person of ordinary skill in the art would have been motivated to combine Burns and LaCelle, not whether the combination would with absolute certainty result in the desired outcome.” Id. at 18. Dr. Rempel’s testimony cited by the Federal Circuit establishes that an ordinarily skilled artisan would have been motivated to apply the curved shape of LaCelle’s underside items to Burns’s elongate members. Our original Remand Decision failed to consider that testimony, and the Federal Circuit has identified that failure as error. Valve II, at 17. The argument proffered by Ironburg to rebut Dr. Rempel’s testimony is not supported by evidence. See Ironburg Remand Br. 23–24 (citing our Remand Decision but failing to cite evidence in support of Ironburg’s proffered argument).” slip op. at 24

  Patent outcomesUS 9,289,688 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 9,289,688
• Google LLC v. Sandpiper CDN, LLCInstituted
  PTAB · Nov 28, 2025 · IPR2025-00969 · APJ Michael T Cygan · IPR · Institution

  The Board instituted IPR on claims 1, 2, 22–24, and 26–46 over all asserted grounds, finding a reasonable likelihood that claim 1 is obvious over Kenner.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. See 35 U.S.C. § 314 (2018); 37 C.F.R. § 42.4(a) (2023). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons given below, on this record, Petitioner has established a reasonable likelihood that it would prevail in showing the unpatentability of at least one of challenged claims 1, 2, 22–24, and 26–46 of the ’903 patent. Accordingly, we institute an inter partes review of the ’903 patent.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had at least a bachelor’s degree in computer science, electrical engineering, or a related field, and at least two years of work or research experience in the field of content delivery management or networks,” and that “[w]ork experience can substitute for formal education and additional formal education can substitute for work experience.” Pet. 5 (citing Ex. 1003 ¶ 47). Patent Owner does not provide any such assessment in its Preliminary Response. Prelim. Resp. 26. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’903 patent and the prior art of record.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes any express claim construction at this stage of the proceeding. Pet. 5; Prelim. Resp. 26. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successInstituted

    “On the current record, we are persuaded by Petitioner that Kenner’s video ID is associated with a shared repeater server. As noted by Patent Owner, Kenner’s video ID includes content coordinate data that may “match with the regional IMs [repeater servers] that have subscribed to that type of file.” Prelim. Resp. 35 (citing Ex. 1005, 36:20–30). Kenner describes that content coordinate data is maintained on a database of each IM, which includes the Internet address of all other connected IMs and content coordinate data describing the type of files stored by the SRUs of each IM. Ex. 1005, 41:1–6. That content coordinate data, stored in each video ID and each IM, teaches the claimed association of alias with repeater server. Because the content coordinate data directs the PIM to the repeater server(s) having that particular data, Kenner’s user does not always access the same repeater server, and Patent Owner’s argument is unavailing.” slip op. at 12

  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,478,903
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Google LLC v. Sandpiper CDN, LLCInstituted
  PTAB · Nov 25, 2025 · IPR2025-00860 · APJ Sheila F Mcshane · IPR · Institution

  The Board instituted review of claims 1–20 on all asserted grounds, finding a reasonable likelihood that the Dilley, Pai, and Wang combination renders the claims obvious.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “partes review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). Under 35 U.S.C. § 314(a), we may not authorize an inter partes review unless the information in the petition and the preliminary response “shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons stated below, we determine that Petitioner has established a reasonable likelihood that it would prevail with respect to at least one claim. We therefore institute inter partes review as to all of the challenged claims of the ’573 patent and all of the asserted grounds of unpatentability in the Petition.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “III. ANALYSIS A. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art: would have had at least a bachelor’s degree in computer science, electrical engineering, or a related field, and at least two years of work or research experience in the field of content delivery management or networks. Work experience can substitute for formal education and additional formal education can substitute for work experience. Pet. 12 (citing Ex. 1006 ¶ 70). Patent Owner asserts that “the Board does not need to resolve the appropriate level of skill for a POSA [person of ordinary skill in the art] for purposes of deciding institution because the Petition fails under any articulation of a POSA.” Prelim Resp. 10. For the purposes of this Decision, we adopt the assessment offered by Petitioner as it is consistent with the ’573 patent and the prior art before us. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner asserts that no claim terms need to be expressly construed by the Board and all terms should be given their ordinary meaning. Pet. 12. Patent Owner agrees that the Phillips standard applies. Prelim. Resp. 10. We determine that we need not expressly construe any claim terms at this juncture. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateEntitled to earlier dateDecided for patent owner

    “We consider the disclosures of the Provisional Application, which refer to cases 1 and 2, in which requests are redirected to an origin server for lower popularity content and to a parent server for medium popularity content at steps 522 and 524 as shown in Figure 5, respectively, wherein the edge server receives a redirect from the popularity service without a “followme” flag. See Ex. 1011 ¶¶ 43, 44. The Provisional Application also discloses that, by comparison, if there is a “follow-me” redirect sent to the edge server, it obtains and caches a resource as shown at step 528 for higher popularity content. Id. ¶ 44. On this record, as Patent Owner asserts, these disclosures are consistent with technical reasons provided in the Provisional Application for instructing the edge server not to cache unpopular resources. See Ex. 1011 ¶¶ 68–69. In light of these disclosures, we preliminarily find support for Dr. Shenoy’s testimony that, even with the words “instruction to not cache” are not literally recited in the Provisional Application, caching and not caching are alternative options that indicate the instruction to the edge server that will be implemented for each option. See Ex. 2014 ¶ 56. Further, these disclosures provide support for Dr. Shenoy’s testimony that the disclosures “reasonably convey to those skilled in the art that Patent Owner had possession of the edge server receiving an instruction to not cache the resource (and instead simply forward the redirect).” Id. In re Johnson states that “it is not true that the factual context out of which the question under § 112 arises is immaterial. Quite the contrary. Here, . . . the ‘written description’ in the [] specification supported the claims in the absence of the limitation, and that specification, having described the whole, necessarily described the part remaining.” See Johnson, 558 F.2d at 1019. This is consistent with M.P.E.P. § 2173.05(i) which states, “[i]f alternative elements are positively recited in the specification, they may be explicitly excluded in the claims.” M.P.E.P. § 2173.05(i). Further, “the failure of the specification to specifically mention a limitation that later appears in the claims is not a fatal one when one skilled in the art would recognize upon reading the specification that the new language reflects what the specification shows has been invented.” All Dental Prodx, LLC v. Advantage Dental Prod., Inc., 309 F.3d 774, 779 (Fed. Cir. 2002). Even though we do not discern that the Provisional Application explicitly discloses an “instruction to not cache,” at least on this preliminary record, and for the purposes of this Decision, there is positive recital of instructions to cache in the Provisional Application and Petitioner has provided sufficient supporting evidence that caching and not caching are alternative options. Further, there is sufficient evidence, in the context of the disclosures of written description support in the Provisional Application, providing support for Dr. Shenoy’s testimony that Patent Owner had possession of an edge server receiving an instruction to not cache the resource. Nonetheless, we invite additional briefing on these issues, including issues relating to alternative options of caching and not caching. On this preliminary record, we find that the ’573 patent has a priority date of April 2, 2008, which predates the earliest possible date on which Newton-471 could be effective as prior art, September 30, 2014 (the date on which the earliest application in the priority chain of Newton-471 was filed). Accordingly, we preliminarily find that Newton-471 is not prior art to the challenged claims. Thus, on the present record, Petitioner has not demonstrated a reasonable likelihood that it would prevail in showing that claims 1–20 are anticipated by Newton-471.” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,924,573

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.