• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• R.J. Reynolds Vapor Company v. Healthier Choices Management Corp.All claims unpatentable
  PTAB · Mar 9, 2026 · IPR2024-01458 · APJ Kristina M Kalan · IPR · Final written decision

  Claims 1, 7, 8, and 11 are unpatentable as obvious over Lee-based combinations; the Gilbert-based grounds did not establish unpatentability.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Pet. 15 (citing Ex. 1003 ¶ 18). Petitioner further argues a “POSA would have been familiar with electrically powered cigarettes and their components and underlying technologies or similar components and technologies.” Id. “For the purposes of this Response,” Patent Owner “does not dispute Petitioner’s proposed level of skill in the art.” Resp. 17. On this complete record, we adopt Petitioner’s unopposed definition because it appears consistent with the’788 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (holding that the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner states that “Petitioner and [Petitioner’s declarant] Mr. Kodama interpret the meaning of the claims based on [Patent Owner’s] construction of the claims by its allegations of infringement in the ongoing litigation.” Resp. 18. Patent Owner further states that for “the purposes of this response,” it “agrees on how the claims are to be construed.” Id. Upon review of the record, we determine that no claim terms require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “the combination of proposed references would operate. As shown in Petitioner’s proposed modification, the Gilbert bulb would have been modified to fit the Lee device. Pet. 57 (annotated Figure); Ex. 1003 ¶ 123 (stating that the combination would work “by merely replacing [Lee’s] heating element (133) with this bulb heater inside of the vaporization unit (14)” and the “bulb heater could be connected to [Lee’s] electric circuit board (111) and battery assembly (11) in a very similar fashion to the nichrome wire heater represented in Lee”); Reply 29–30 (explaining Petitioner’s annotated figure wherein “the fiber rod is not encapsulated inside the bulb”); Ex. 1026 ¶¶ 29–30 (clarifying how the fiber in Petitioner’s proposed combination from its annotated Figure in the Petition extends to, and makes contact with, the outside of the bulb, putting the fluid into direct contact with the bulb; explaining various simple ways a POSA would understand to accomplish this). We credit Petitioner’s proposal and Mr. Kodama’s testimony in this regard. Therefore, we agree that Lee would not have to be “significantly modified or reimagined” as alleged by Patent Owner, nor would the inclusion of a bulb in the Lee device “render Lee inoperable” in view of the modifications to the Gilbert bulb included in Lee, as proposed by Petitioner. Resp. 30–31.” slip op. at 25

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “art would not have combined Lee and Gilbert or Levin, particularly with respect to element [1d], we are persuaded by Petitioner’s arguments that one of ordinary skill in the art would have been motivated to make the combination with a reasonable expectation of success. Petitioner states that the motivation to make the combination would have come from issues “with e-cigarettes at the time, such as metallic taste issues or inhalation risks associated with the use of a metal wire heating element,” and would have explored “heat conducting materials that could vaporize the nicotine liquid without making direct contact with the heating wire.” Pet. 57 (citing Ex. 1003 ¶ 117 (discussing the metallic flavor “dry hit” problem)); see also Reply 18–19. Additionally, Petitioner argues that one of ordinary skill in the art would have implemented “a heating element within a glass bulb to increase the life of the heating element and prevent failure of a device.” Id. at 57–58 (citing Ex. 1009 ¶ 4; Ex. 1003 ¶ 119), 59 (a “POSA would have been motivated to implement a heating element within a glass bulb like that described in Levin for all of the reasons described above” in connection with Gilbert). Petitioner depicts one example of how its proposed combination would incorporate the Gilbert bulb into the Lee device. Pet. 57 (citing Ex. 1003 ¶ 118)). Petitioner additionally relies on Levin’s disclosure that using a bulb will “allow for a consistent and reliable heat source” and “achieve a desired operating temperature when compared to conventional devices.” Id. at 59 (citing Ex. 1009 ¶¶ 56, 49). Mr. Kodama also notes the age and ubiquity of bulb heaters, credibly testifying that “a POSA would have been motivated to implement a bulb heater in the Lee device, and, due at least to the ubiquitous nature of such heaters, the implementation of such a heater would have been well within the knowledge and skill of a POSA.” Pet. 59; Reply 20; Ex. 1003 ¶¶ 39–48, 123. Petitioner also provides sufficient explanation as to “how” and “why” the combination of proposed references would operate. As shown in Petitioner’s proposed modification, the Gilbert bulb would have been modified to fit the Lee device. Pet. 57 (annotated Figure); Ex. 1003 ¶ 123 (stating that the combination would work “by merely replacing [Lee’s] heating element (133) with this bulb heater inside of the vaporization unit (14)” and the “bulb heater could be connected to [Lee’s] electric circuit board (111) and battery assembly (11) in a very similar fashion to the nichrome wire heater represented in Lee”); Reply 29–30 (explaining Petitioner’s annotated figure wherein “the fiber rod is not encapsulated inside the bulb”); Ex. 1026 ¶¶ 29–30 (clarifying how the fiber in Petitioner’s proposed combination from its annotated Figure in the Petition extends to, and makes contact with, the outside of the bulb, putting the fluid into direct contact with the bulb; explaining various simple ways a POSA would understand to accomplish this). We credit Petitioner’s proposal and Mr. Kodama’s testimony in this regard. Therefore, we agree that Lee would not have to be “significantly modified or reimagined” as alleged by Patent Owner, nor would the inclusion of a bulb in the Lee device “render Lee inoperable” in view of the modifications to the Gilbert bulb included in Lee, as proposed by Petitioner. Resp. 30–31.” slip op. at 24

  Patent outcomesUS 9,538,788 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,538,788
• Hanwha Solutions Corporation v. Maxeon Solar Pte. Ltd.No claims unpatentable
  PTAB · Feb 24, 2026 · IPR2024-01198 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 10–20 were not shown unpatentable because Petitioner did not establish the claimed metal impurities or a reason to combine Istratov’s gettering process with the cited solar-cell references.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “These disclosures, taken together, indicate that “metal impurities” are undesirable, and, accordingly, the term “metal impurities” is not meant to include intentionally added dopants. The undesirability of “metal impurities” is also demonstrated by the Specification’s instruction that “contaminants and/or impurities” are used interchangeably throughout. Ex. 1001, 5:8–9. In that regard, “iron, nickel, and/or chromium, among others” are the only exemplary metal impurities and/or metal contaminants identified in the Specification. Id. at 4:65–5:1 (“In an embodiment, the silicon substrate 202 can have contaminants and/or impurities 220, for example metal contaminants and/or metal impurities, such as iron, nickel and/or chromium, among others); 5:35–39 (“In an embodiment, the heating can include gettering contaminants, e.g., metal impurities and/or metal contaminants, from the substrate to the emitter region. In an example, the metal impurities and/or metal contaminants can be iron, nickel, and/or contaminants 520, e.g. metal impurities and/or contaminants, can be located in the second emitter region 512 . . . the metal impurities 520 can be iron, nickel and/or chromium, among others.”). And metal impurities and metal contaminants are both described as gettering from the silicon substrate to the emitter region. See id. at 5:5–9 (“A gettering process can be used to trap the metal impurities 220 in the emitter regions 212, reducing recombination within the silicon substrate 202 and improving overall cell lifetime.”); 5:35– 40 (“In an embodiment, the heating can include gettering contaminants, e.g. metal impurities and/or metal contaminant[s], from the substrate to the emitter region. In an example, the metal impurities and/or metal contaminants can be iron, nickel and/or chromium among others.”); 6:5–8 (“In an embodiment, the heating can getter 232 contaminants 220 from, or nearby, the surface 204 of the silicon substrate 202 and/or from within the silicon substrate 202 to the emitter region 212.”) Accordingly, the Specification conveys that “metal impurities” are metal contaminants that are detrimental to the electrical conduction of solar cells.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “Petitioner fails to sufficiently demonstrate by a preponderance of the evidence that a POSITA would have been motivated to look to Istratov’s gettering process to improve Choi’s solar cell. Although Petitioner argues that a POSITA would have been motivated to look to Istratov’s gettering process upon identifying detrimental levels of metal impurities in Choi’s substrate, neither Petitioner nor Dr. Holman levels of metal impurities in Choi’s substrate, what level of metal impurities would be “detrimental,” or what detriment the metal impurities would cause. In that regard, Petitioner does not direct us to, nor do we discern, any teachings in Choi regarding the presence of metal impurities in the silicon substrate, let alone iron and/or copper impurities such as those described in Istratov.” slip op. at 24

  • ExcludeMotion to exclude, deniedDenied

    “We agree with Petitioner. As the Board indicated in Chicago Mercantile Exchange, whether a document qualifies as a printed publication requires a legal determination based upon evidence and “the issue of whether there is sufficient evidence in the record . . . should be presented in the patent owner response—not a motion to exclude.” Chicago Mercantile Exchange, Paper 35 at 52. Although addressing the admissibility of evidence (authenticity or hearsay) underlying the factual determinations of whether Exhibits 1018, 1034, and 1120 may be the subject of a motion to exclude, Patent Owner’s arguments in the Motion address whether there is sufficient evidence to establish that these exhibits are prior art, not the general admissibility of the documents. See Mot. 3–6; Chicago Mercantile Exchange, Paper 35 at 52. be excluded. These exhibits, for the most part, are offered to support Dr. Holman’s testimony regarding the background of the technology (Ex. 1003 ¶¶ 42, 43, 45–52, 56, 57 (citing Ex. 1018), 55, 67 (citing Ex. 1034)) or what the ordinarily skilled artisan would have understood (Pet. Reply 11 (citing Ex. 1120); Ex. 1089 ¶¶ 46–48, 56, 59, 60, 69 (citing Ex. 1120)). Furthermore, Exhibit 1018 was authored by Dr. Holman, and is identified in the curriculum vitae appended to Dr. Holman’s declaration in support of the Petition. Ex. 1003, 224 (App’x. A). Accordingly, we deny Patent Owner’s motion to exclude” slip op. at 32

  Patent outcomesUS 11,251,315 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,251,315
• Hanwha Solutions Corporation v. Maxeon Solar Pte. Ltd.Some claims unpatentable
  PTAB · Feb 24, 2026 · IPR2024-01203 · APJ Avelyn M Ross · IPR · Final written decision

  Claims 1–11 are unpatentable as obvious; claim 12 was not shown unpatentable because the evidence did not establish that Froitzheim’s silver contact was formed over silicon dioxide.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art would have had (i) an advanced degree in electrical engineering, mechanical engineering, applied physics, chemistry, materials science, or a related discipline and (ii) at least one year of experience 7 Neither Petitioner nor Patent Owner raises issues of objective indicia of nonobviousness. designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Alternatively, a POSITA [i.e., a person of ordinary skill in the art] would have had (i) a bachelor’s degree in the aforementioned disciplines and (ii) at least two years of experience designing, developing, or researching the design and/or manufacture of solar cells or related technologies. Less work experience may be compensated by a higher level of education, and vice versa.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction We construe claim terms according to the standard set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–17 (Fed. Cir. 2005) (en banc); 37 C.F.R. § 42.100(b). Under Phillips, we give claim terms “their ordinary and customary meaning.” Phillips, 415 F.3d at 1312. “[T]he ordinary and customary meaning of a claim term is the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Id. at 1313. “Importantly, the person of ordinary skill in the art is deemed to read the claim term not only in the context of the particular claim in which the disputed term appears, but in the context of the entire patent, including the specification.” Id.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We are persuaded that Petitioner has shown a reasonable expectation of success in the combination of Froitzheim and Gan. Petitioner explains that the combination of Froitzheim and Gan simply replaces one emitter, i.e., Froitzheim’s diffused emitter, with the polysilicon emitter of Gan. Pet. 36. According to Petitioner, a person of ordinary skill in the art would have also readily understood how to replace a diffused emitter with a polysilicon emitter and oxide layer [and] would have understood that instead of diffusing boron into the substrate’s back side as taught by Froitzheim, a [person of ordinary skill in the art] would instead follow the manufacturing technique taught by Gan. Pet. 37 (citing Ex. 1005, 246). Petitioner explains that the Gan processes are well-known and routine, and Dr. Holman states that “modifying Froitzheim in view of Gan simply involves using Gan’s known technique of a polysilicon emitter and oxide layer with Froitzheim’s known solar cell to improve Froitzheim’s solar cell in a similar way.” Pet. 37 (citing Ex. 1003 ¶ 144). For example, Petitioner directs our attention to “multiple instances” in which oxide layers and polysilicon emitters have been implemented successfully in the art. Pet. 37 (citing Ex. 1005, 246; Ex. 1006 ¶ 22; Ex. 1046, Abstr., 1121; Ex. 1003 ¶ 145). Furthermore, Gan’s statement that “cell performance can be improved if the diffused-emitter is replaced with the polysilicon emitter” and “polysilicon emitters with low J0 and ρc can be obtained with a very small fraction of interfacial oxide breakup” indicate a reasonable expectation of success. Ex. 1005, 245, 249. Gan also states that “polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells.” Ex. 1005, 249. Thus, we are persuaded that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Froitzheim and Gan.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We are not persuaded the record evidence rises to the level of a teaching away. “A reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). And “teaching away” requires more than the mere expression of a general preference.” Galderma Labs., L.P., v. Tolmar, Inc., 737 F.3d 731, 738 (Fed. Cir. 2013). Notably, our reviewing court has determined that a reference can distinguish prior art in order to show the novelty of an invention without teaching away from combining the prior art with the invention disclosed in the reference. See Ricoh Co. v. Quanta Computer Inc., 550 F.3d 1325, 1332 (Fed. Cir. 2008). Here, Li prefers a “heterogeneous PN junction” and states that “a PN junction is prepared by a low-temperature deposition method, which avoids a conventional diffusion process at 800–1000°C. Such high-temperature process will cause more defects or contamination in silicon material, which will affect the improvement of cell efficiency.” Ex. 1008, 4. But, Li’s preference for lower temperature diffusion processes does not amount to a teaching away from the broader disclosure. In fact, Li acknowledges that “[t]he silicon thin film can be prepared by any deposition method,” including conventional processes at higher temperatures. Ex. 1008, 4 (emphasis added). And, while Patent Owner asserts that “[d]eposition methods are not relevant to the parties’ dispute, which is over deposition temperature” (Sur-reply 17), the deposition method employed includes its deposition temperature. See Ex. 1008, 4 (Li describing “conventional” diffusion processes at temperatures of 800–1000° C). Thus, just because Li teaches one way of depositing its silicon thin film using a low-temperature deposition method does not mean that Li teaches away from high-temperature processes. Li’s teachings do not discredit or discourage high-temperature processes in a manner that may be said to teach away.” slip op. at 51

  Patent outcomesUS 8,222,516 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,222,516
• Allstate Insurance Company v. Atos, LLCSome claims unpatentable
  PTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand

  Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”

  RulingsRemand decision

  • RemandOther

    “was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35

  Patent outcomesUS 9,846,174 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,846,174
• Canadian Solar Inc. v. Maxeon Solar Pte. Ltd.Some claims unpatentable
  PTAB · Jan 12, 2026 · IPR2024-01039 · APJ Kristina M Kalan · IPR · Final written decision

  Claims 9–11 are unpatentable as obvious; claim 12 was not shown unpatentable because Froitzheim does not disclose silver contacts formed over silicon dioxide.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In the Institution Decision, we adopted the assessment offered by Petitioner. Inst. Dec. 7–8. Because Petitioner’s definition of the level of skill in the art is consistent with the ’516 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “C. Claim Construction We construe each claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record and the arguments raised by the parties, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We are convinced Petitioner has shown that a person of ordinary skill in the art would have had a reason to combine the subject matter of Froitzheim and Gan for the reasons expressed by Petitioner (Pet. 42–48) and discussed above (see supra). Patent Owner’s arguments in response are not persuasive. Though Gan’s teachings are directed to silicon concentrator solar cells, the ordinarily skilled artisan would have understood Gan also refers to silicon solar cells in general. Compare Ex. 1007, 249 (stating “[t]he data in Fig. 6 are quite useful for silicon solar cells” and “cell efficiency is obtained for a backside contact solar cell”), with id. (explaining that “polysilicon emitters with these qualities can be quite useful for silicon concentrator solar cells”). Dr. Banerjee testifies that “the Skilled Artisan would interpret Gan as recommending the feature for solar cells in general” and “that its polysilicon emitter with interfacial oxide feature is beneficial for solar cell efficiency in general.” Ex. 1003 ¶ 146; Ex. 2023, 93:10–15. Furthermore, Dr. Ruby testified that when designing solar cells, he reviews published works in the field and would not necessarily limit his review to the type of solar cell being developed. Ex. 1066, 48:4–51:16. Q So you would agree that if you're developing a 1-Sun solar cell, it might be worthwhile to look at publications regarding concentrator solar cells? * * * THE WITNESS: Well, it would be advisable or suggest -- you know, it would certainly be worth -- worth looking at, although not all of the methods for creating solar cells -- concentrator cells are required for producing 1-Sun cells. So some things would be of use and many things would not. Ex. 1066, 51:7–16. That Dr. Banerjee and Dr. Ruby each testify that a person of ordinary skill in the art would have had reason to consult the teachings of both concentrator and non-concentrator solar cells—in fact describing such consideration as “advisable,” “suggest[ed],” and “worth looking at”—when designing a solar cell is dispositive of this issue. We acknowledge Dr. Ruby’s testimony that consideration of broader teachings may hinge on a specific application for the solar cells. Ex. 1066, 51:7–16. But the combination proposed here by Petitioner, which substitutes one known emitter for another, that is, a polysilicon emitter for a diffused emitter, to improve efficiency of solar cell performance, has been shown to have general applicability regardless of solar cell type. Ex. 1003 ¶¶ 142–148 (citing Ex. 1006, Abstr., ¶¶ 1, 9; Ex. 1007, 245, 248, 249; Ex. 1014; Ex. 1039); Ex. 1067 ¶¶ 21–28; Ex. 2023, 32:2–11. Accordingly, we are persuaded that Petitioner has shown that the” slip op. at 25

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “The standard for demonstrating teaching away is, as Petitioner notes, high. “A reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the [inventor].” In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994). Under that standard, Patent Owner’s “teaching away” argument is unavailing. The permitted temperatures in Froitzheim include a range of 900°C-1200°C, which expresses a permitted range, rather than a discouragement or divergence from that range, and the Froitzheim range clearly encompasses the temperatures used by Gan. A reference will also “teach away” if it suggests that the developments flowing from its disclosures are “unlikely to produce the objective of the applicant’s invention,” which is not the case here. See, e.g., Syntex (U.S.A.) LLC v. Apotex, Inc., 407 F.3d 1371, 1380 (Fed. Cir. 2005). The record demonstrates that Gan’s teachings are consistent with Froitzheim’s and, in the proposed combination, likely to produce the desired objective. Pet. Reply 13. In sum, the evidence of record here does not support a conclusion that Froitzheim criticizes or discredits the use of the lower temperatures in its expressly stated range, or that an ordinarily skilled artisan would have been discouraged from considering the full range of Froitzheim’s identified temperatures. Nor does it support a conclusion that Gan’s temperature, which is within Froitzheim’s range of temperatures, amounts to a criticizing, discrediting, or discouraging that would constitute a teaching away.” slip op. at 28

  Patent outcomesUS 8,222,516 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,222,516
• Canadian Solar Inc. v. Maxeon Solar Pte. Ltd.No claims unpatentable
  PTAB · Jan 12, 2026 · IPR2024-01038 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 10–16 and 19 were not shown unpatentable because Petitioner did not establish a motivation to combine the cited references to meet the claimed dopant concentration.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Artisan”) would have had “an advanced degree involving the discipline of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field,” or “a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field.” Pet. 5–6 (citing Ex. 1003 ¶ 47); 1194IPR Pet. 11 (citing Ex. 1100 ¶ 47). Patent Owner states that it “accepts the level of ordinary skill in the art that is proposed in the Petition.” PO Resp. 11. In the Institution Decisions, we adopted the assessment offered by Petitioner. 1038IPR Dec. 5–6; 1194IPR Dec. 8. Because Petitioner’s definition of the level of skill in the art is consistent with the ’315 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “B. Claim Construction We construe each claim “in accordance with the ordinary and customary meaning of such claim as understood by one of ordinary skill in the art and the prosecution history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under this standard, claim terms are generally given their plain and ordinary meaning as would have been understood by a person of ordinary skill in the art at the time of the invention and in the context of the entire patent disclosure. Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). Only those terms in controversy need to be construed, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). Based on our review of the complete trial record, we determine that it is not necessary to expressly construe any claim terms to resolve the parties’ dispute. Realtime Data, 912 F.3d at 1375.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Petitioner fails to sufficiently demonstrate that the combination of Li and King, Swanson-352, or Marvin teaches “a portion of the silicon substrate has a dopant concentration of approximately less than or equal to 2x1018 cm-3” as recited in claim 10 because Petitioner fails to establish by a preponderance of the evidence that a Skilled Artisan would have been motivated to look to the dopant concentrations in King, Swanson-352, or Marvin to determine the concentration of dopants for use in Li’s silicon substrate.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Our rules provide that a petitioner must include “[a] full statement of the reasons for the relief requested, including a detailed explanation of the significance of the evidence including material facts, and the governing laws, rules, and precedent.” 37 C.F.R. § 42.22(a). Our rules also state that “[a] reply may only respond to arguments raised in the corresponding . . . patent owner response.” Id. § 42.23(b). “‘Respond,’ in the context of 37 C.F.R. § 42.23(b), does not mean proceed in a new direction with a new approach as compared to the positions taken in a prior filing.” PTAB Consolidated Trial Practice Guide, 74 (Dec. 2025) (“CTPG”). Our Trial argument in reply that it could have presented earlier, e.g., to make out a prima facie case of unpatentability.” Id. at 73; see also id. at 74 (“Examples of indications that a new issue has been raised in a reply include new evidence necessary to make out a prima facie case for the patentability or unpatentability of an original or proposed substitute claim, such as newly raised rationale to combine the prior art references that was not expressed in the petition.”). In the Petition, Petitioner argues that a Skilled Artisan would have been motivated to combine Li’s back contact cell with the front portion doping concentration disclosed in King, Swanson-352, or Marvin, because Li, King, Swanson-352, and Marvin are analogous art. Pet. 30–32. Petitioner also points to Li’s acknowledgement that techniques for increasing efficiency are generally desired because efficiency is an important characteristic of a solar cell. Id. at 32. As Patent Owner notes, however, the Petition does not include the phrase “finite number” or “obvious to try.” PO Sur-reply 20. Petitioner’s “obvious to try” argument is a newly raised rationale to combine the prior art references necessary to make out a prima facie case of unpatentability. See CTPG 74. Accordingly, we do not consider Petitioner’s untimely new argument.” slip op. at 21

  Patent outcomesUS 11,251,315 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 11,251,315
• Clearcorrect Operating, LLC v. Align Technology Inc.Institution denied
  PTAB · Oct 23, 2025 · IPR2025-00814 · APJ Kevin F Turner · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood of prevailing on any challenged claim over the asserted obviousness combination.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “if the differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains. 35 U.S.C. § 103(a); see also KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved based on underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) any objective indicia of nonobviousness.7 Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966). An obviousness determination requires finding a reason to combine accompanied by a reasonable expectation of achieving what is claimed in the challenged patent. See Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). “[A]ny need or problem known in the field of endeavor at the time of invention and addressed by the patent can provide a reason for combining the elements in the manner claimed.” KSR, 550 U.S. at 419–20.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away foundMotivation not foundNot shown unpatentable

    “tripping” as “any motion of a tooth in any direction other than directly toward the desired final position.” Ex. 1004, 4:12–13. Chishti-511 teaches minimizing round-tripping (“teeth are moved in the quickest fashion with the least amount of round-tripping”), but acknowledges that “[r]ound-tripping is sometimes necessary to allow teeth to move past each other.” Id. at 4:9–15. In an attempt to counter Patent Owner’s teaching away arguments, Petitioner relies heavily on Chishti-511’s statement that “[r]ound[-]tripping is sometimes necessary.” See Pet. 29–30; see also Ex. 1003 ¶ 83 (Dr. Yadav relying on Chishti-511). This reliance is unavailing, because as noted above, Chishti-511 defines “round-tripping” more broadly than is claimed here. Indeed, in the ’444 IPR, the Board stated that “the ‘round tripping’ described in Chishti ’511 is something different than the ‘round tripping’ required by the ’444 patent.”10 Ex. 1008, 16. Despite being aware of this prior finding 10 In the ’444 IPR, the Board employed the same construction of “round-tripping” that we use here. Compare Ex. 1008, 6, with Section II.C supra. (see Pet. 6), Petitioner here fails to address the difference between Chishti- 511’s round-tripping and the claimed round-tripping. That is, Petitioner places great weight on Chishti-511’s statement that “round-tripping is sometimes necessary,” but has not established that Chishti-511 contemplates round-tripping as claimed, as opposed to some other, different movement pattern encompassed by Chishti-511’s broader statement about round-tripping.” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “discussion of “need[ing] collision-free treatment paths,” skilled artisans would have turned to Becker. Pet. 23–24 (citing Ex. 1004, 4:15–22). But on this record, and especially in view of the teachings away from round-tripping, Petitioner does not demonstrate a reasonable likelihood that a skilled artisan would have combined Becker’s movement pattern with the Chishti systems and Sachdeva. In particular, the Petition and supporting materials lack sufficient argument and evidence for us to conclude that a person of ordinary skill in the art would have had reason to apply Becker’s movement pattern in the context of an aligner treatment. Becker is a textbook relating to the orthodontic treatment of impacted teeth. Ex. 1006, 1 (Title). Patent Owner correctly states that “Becker is a different orthodontic treatment modality compared to the Chishti references,” using “braces and numerous brackets, wires, and rubber bands, with the wire-and-bracket systems being attached directly and permanently to the teeth.” Prelim. Resp. 21–22; see also supra Section II.D.4. “Becker involves traditional orthodontic practice: manual, by-eye adjustment of its archwires, elastic thread, and palatal wires by a treating orthodontist in repeated office visits.” Prelim. Resp. 22. Chishti-511, in contrast, uses “treatment planning software” to “pre-stag[e] a series of tooth positions from which a sequence of appliances can be manufactured.” Id. On this record, we agree with Patent Owner that “Becker at best shows that round-tripping was an option in limited circumstances involving wire-and-bracket treatment.” See Prelim. Resp. 3. Petitioner does not direct us to any persuasive evidence that using aligners to effect Becker’s tooth transposition “would be appropriate or even possible.” Id. at 22. As Patent Owner correctly notes, Petitioner does not point to any teaching in Becker regarding aligner treatment or corresponding treatment planning software. Id. at 23. Nor are we directed to any portions of Chishti-511, Chishti-876, or Sachdeva that mention using aligners to transpose teeth. These omissions are important because “[i]n contrast to treatment with braces, in which wires are manually adjusted by the orthodontist to move teeth reactively, aligner treatment involves treatment planning in which a detailed path of teeth is calculated in advance.” Id. at 4. Given these differences, Petitioner has not persuasively explained why Becker’s tooth movement pattern and mechanism would have been of interest to a skilled artisan who was” slip op. at 25

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “as of the August 30, 2006 claimed priority date would have been part of an interdisciplinary team. This team would have included a member with an advanced degree related to dentistry (e.g., BDS, MDS, DDS, DMD) with experience in orthodontics, including 1–3 years of orthodontic training or equivalent experience, and experience using clear aligners. The team may have also included members with a degree in a technical area related to software, graphics, computers, or a related discipline. This technical team member would have had 1–3 years of software development experience. For all team members, more education could substitute for experience and vice versa. Pet. 7–8 (citing Ex. 1003 ¶¶ 23–24; Ex. 1017 ¶¶ 23–25; Ex. 1029; Ex. 1030). At this stage, Patent Owner does not dispute Petitioner’s proposal or offer an alternative proposal. See generally Prelim. Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 8

  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,456,217
• Clearcorrect Operating, LLC v. Align Technology Inc.Institution denied
  PTAB · Oct 23, 2025 · IPR2025-00815 · APJ Cynthia M Hardman · IPR · Institution

  The Board denied institution because ClearCorrect did not show a reasonable likelihood that claims 1–24 would have been obvious over Chishti-511, Chishti-876, Sachdeva, and Becker.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied

    “3. Analysis In view of the arguments and cited evidence, we find on this record that Petitioner has not demonstrated a reasonable likelihood of showing that a person of ordinary skill in the art would have been motivated to combine Becker’s round-tripping with the teachings of the Chishti patents and Sachdeva.” slip op. at 20

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “At this stage, Patent Owner does not dispute Petitioner’s proposal or offer an alternative proposal. See generally Prelim. Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Neither party indicates that any other claim term requires express construction. Only claim terms in controversy need be construed. Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”). For purposes of this Decision, we determine that no other claim term requires construction.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITA

    “Court for the Western District of Texas (see supra Section I.B), they jointly adopted the definition of “round-tripping” set forth in the ’879 patent Specification. Pet. 9; Prelim. Resp. 8; Ex. 1013, 8. The ’879 patent Specification defines “round-tripping” as moving a first tooth out of the path of a second tooth, and once the second tooth has moved sufficiently, moving the first tooth back to its previous position before proceeding to a desired final position of that first tooth. See Ex. 1001, 13:9–13. We adopt this agreed-upon construction for purposes of this Decision.” slip op. at 9

  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,524,879
• CQV Co., Ltd. v. Merck Patent GmbHNo claims unpatentable
  PTAB · Oct 14, 2025 · PGR2021-00054 · APJ Kristina M Kalan · PGR · Remand

  Claims 1–22 were not shown unpatentable because Sample C was not proven publicly available as prior art, and the original decision found the remaining grounds insufficient.

  RulingsRemand decision

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication not establishedNot shown unpatentable

    “We agree with Patent Owner that Petitioner’s evidence in Kuntz (Ex. 1026), the Annual Report (Ex. 1028), Masuko (Ex. 1029), and Pfaff (Ex. 1034) is insufficient to show that Xirallic® Sample C was available to the public before the effective filing date of the ’861 patent. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26. Kuntz, the Annual Report, Masuko, and Pfaff may support a finding that the Xirallic® line of products was available to the public, but these documents do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public. We also agree with Patent Owner that the Technical Data Sheets (Exs. 1005–1010), Certificates of Analysis (Exs. 1011–1017), and Material Safety Data Sheet (Ex. 1025) are insufficient to show that Xirallic® Sample C was available to the public. Petitioner has not asserted, nor do we find, that any of these documents refer to or describe the lot of Xirallic® from which Sample C was taken. See Final Dec. 26–27. Regardless of how the Technical Data Sheets were used in the Opposition against the European counterpart of the ’861 patent (Exs. 1040, 1041) and during the prosecution of the application from which the ’861 patent issued (Ex. 1003, 102–104), the Technical Data Sheets do not refer to or describe the lot of Xirallic® from which Sample C was taken. Moreover, as noted by Patent Owner, the Technical Data Sheets (Exs. 1005–1010) indicate that they are “preliminary” and Petitioner has not provided any evidence that the Technical Data Sheets were ever issued to the public, as opposed to just issued internally. See PO Resp. 18–19. We also find persuasive Patent Owner’s argument that the Technical Data Sheets are preliminary because other, later-dated technical data sheets (Exs. 2012, 2013) lack the “preliminary” label and list characteristics that are different from those in Exhibits 1005–1010. See PO Resp. 19 (comparing, e.g., Ex. 1009 and Ex. 2013; Ex. 1005 and Ex. 2012). The Technical Data Sheets may support a finding that the Xirallic® products they describe existed as of the dates on the documents, but they do not support a finding that the lot of Xirallic® from which Sample C was taken was available to the public.” slip op. at 20

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedOther

    “witnesses. See Elbit Systems of Am., LLC v. Thales Visionix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (citing Trs. of Columbia Univ. v. Illumina, Inc., 620 F. App’x 916, 922 (Fed. Cir. 2015); Inwood Labs., Inc. v. Ives Labs., Inc., 456 U.S. 844, 856 (1982)). We have reviewed the witness testimony in the record and, more particularly, Mr. Choi’s deposition answers regarding Petitioner’s purchase of the lot of Xirallic® from which Sample C came. We find that Mr. Choi’s responses cast doubt on the credibility of his declaration testimony, namely with regard to the public availability of Sample C. Mr. Choi represented that he was involved in the purchase of the lot of Xirallic® from which Sample C was taken. Ex. 2011, 48:1–23. Mr. Choi stated that he instructed Petitioner’s marketing team manager to buy the sample from a distributor of Patent Owner’s products located in Europe. Id. at 48:24–49:4. Mr. Choi stated that he has evidence of the transaction, but refused to reveal the name of the company from which Petitioner purportedly purchased the lot of Xirallic® (id. at 49:5–50:3) and refused to produce an email in his possession that would corroborate his testimony regarding Petitioner’s acquisition of the product (id. at 50:8–16, 51:10–23). Mr. Choi represented that he does not remember how much Petitioner paid for Sample B. Id. at 56:4–5. Mr. Choi admitted that the entity from which Petitioner acquired the lot of Xirallic® from which Sample C was taken is “not currently a Merck distributor” (Ex. 2011, 50:4–7) and was not “a Merck distributor at the time” that “samples B and C were purchased” (id. at 51:25–52:2). According to Mr. Choi, the company is a “former distributor” of Patent Owner’s products. Id. at 52:3–6. Mr. Choi did not know, according to his testimony, when that unnamed entity first obtained the lot of Xirallic® (id. at 52:7–10) and he stated that he did not have personal knowledge of how the entity obtained the lot of Xirallic® (id. at 52:12–19). Instead, Mr. Choi assumed the entity was “able to obtain the sample through the routine course or process” the entity uses “to take samples or get samples.” Id. at 52:12–19. Mr. Choi believed the sample of Xirallic® from which Sample C was taken was sealed when Petitioner received it because samples from dealers are sealed, and he remembered observing that the package was from a dealer. Id. at 52:24– 54:25. However, Mr. Choi admitted that he did not obtain a technical data sheet or certificate of analysis for the lot of Xirallic® from which Samples B and C were taken. Id. at 59:6–11. Mr. Choi also answered questions regarding Petitioner’s purchase of Samples D and H. Ex. 2011, 62:20–66:8, 67:7–9, 73:12–13, 73:17–22. Similar to his testimony regarding Samples B and C, Mr. Choi admitted withholding an email regarding the purchase of the lot of Xirallic® from which Sample D was taken. Id. at 62:20–63:9. Mr. Choi also admitted that he did not know how Akzo USA or Axalta obtained the Xirallic® the companies sold to him, and admitted that Akzo USA was not a distributor of Patent Owner’s products at the time Petitioner purchased the product. Id. at 63:10–66:8, 73:17–22. Mr. Choi also admitted that Petitioner did not pay Akzo USA for the lot of Xirallic® from which Sample D was taken, and did not pay Axalta for the lot of Xirallic® from which Sample H was taken. Id. at 67:7–9, 73:12–13. Although Petitioner presents declaration testimony from Mr. Choi representing that he purchased the lot of Xirallic® from which Samples B and C were taken in October 2011 (Ex. 1004 ¶ 16), Mr. Choi’s declaration testimony lacks corroborating evidence, and his deposition testimony does not support that the product was available to the public, as we found in our Final Written Decision. See Final Dec. 27–28. Notably, Petitioner produced corroborating evidence for Mr. Choi’s acquisition of Samples A, H, and I. See Ex. 1004 ¶¶ 13 (citing Ex. 1047), 18 (citing Exs. 1024, 1025). However, Mr. Choi withheld similar evidence for the Xirallic® lots from which Samples B, C, and D were taken. See Ex. 2011, 50:8–16, 51:10–23, 62:20– 63:9; Final Dec. 28. As Patent Owner argues, there is “no information to determine when a contract was established, that there was consideration for the exchange, that the product was available to be delivered when the alleged transaction took place, or even when the product was delivered. Choi has no memory of what was paid for the product.” Sur-Reply 24–25; see also PO Resp. 13–14; PO Br. Rem. 2–4.” slip op. at 34

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Based on the evidence discussed above, we are not persuaded that Petitioner has shown by a preponderance of the evidence that Sample C was available to the public. Regardless of whether a company avoids wasting shelf life of its products (Ex. 1004 ¶¶ 15–16), there is no persuasive evidence in the record showing that the lot of Xirallic® from which Sample C was taken was released from quality control and then made available to the public by Patent Owner. Mr. Choi’s testimony shows that Petitioner obtained the lot of Xirallic® from which Sample C was taken in an atypical manner (i.e., not from Patent Owner or one of Patent Owner’s current distributors) (Ex. 2011, 49:5–50:7, 50:8–16, 51:10–23, 51:25–52:6, 52:12– 19), and there is no evidence in the record to show that the lot of Xirallic® was intended for sale, rather than for experimental use only or for some other restricted use. Accordingly, we determine Petitioner has not demonstrated by a preponderance of the evidence that Sample C qualifies as prior art against the ’861 patent, and we determine that Petitioner has not shown by a preponderance of the evidence that the ’861 patent is unpatentable over the grounds relying on Sample C.” slip op. at 38

  Patent outcomesUS 10,647,861 not shown unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 10,647,861

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.