• Twitch Interactive, Inc. v. Razdog Holdings LLCAll claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-00308 · APJ Aaron W Moore · IPR · Final written decision

  The Board held claim 1 unpatentable as obvious over Darnell and Kim, and over Dasgupta and Darnell; Judge Moore dissented as to the Dasgupta and Kim ground.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Decided for patent owner

    “2. “Real Time” – The Parties’ Positions In the preliminary phase of this proceeding, the principal claim term” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “1. Rationale to Combine Darnell and Kim Petitioner contends that “Darnell and Kim address similar problems of” slip op. at 35

  • Expert testimonyOther

    “form of storage or minimal time delay, and Patent Owner concedes as much in this proceeding. See, e.g., Ex. 1082, 125:19–22, 126:3–10; Tr. 41:26– 42:14, 53:20–25. Accordingly, the mere fact that Darnell’s system may aggregate content feeds or content items on a server, merge content, store content, and then deliver content to a user interface, does not preclude it from being done in “real time” as that term would be understood by a person of ordinary skill in the art reading the ’654 patent in its entirety.” slip op. at 48

  Patent outcomesUS 10,334,068 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,334,068
• Twitch Interactive, Inc. v. Razdog Holdings LLCAll claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-00307 · APJ Kevin C Trock · IPR · Final written decision

  Claims 1–18 are unpatentable: the majority finds them obvious over the asserted prior-art combinations, including Darnell and Kim and Dasgupta-based combinations.

  RulingsFinal written decision

  • BurdenFwd all claims unpatentableUnpatentable

    “§ 6. This Final Written Decision issues pursuant to 35 U.S.C. § 318(a) (2018) and 37 C.F.R. § 42.73 (2019). For the reasons discussed herein, we determine that Petitioner, Twitch Interactive, Inc., has shown by a preponderance of the evidence that claims 1–18 (the “challenged claims”) of U.S. Patent No. 9,729,658 B2 (Ex. 1001, “the ’658 patent”) are unpatentable. See 35 U.S.C. § 316(e) (2018); 37 C.F.R. § 42.1(d) (2019).” slip op. at 2

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningDecided for petitioner

    “2. “Real Time” – The Parties’ Positions In the preliminary phase of this proceeding, the principal claim term” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “1. Rationale to Combine Darnell and Kim Petitioner contends that “Darnell and Kim address similar problems of” slip op. at 37

  Patent outcomesUS 9,729,658 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,729,658
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Jul 22, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Remand

  On remand, the Board maintained its finding that claims 2 and 17 are unpatentable under §103 over Diekmann and Ma, and Suzuki and Ma.

  RulingsRemand decision

  • RemandDecided for petitioner

    “that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Dependent claims 2 and 17 require an electron transport layer (ETL) that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2

  Patent outcomesUS 11,828,425 unpatentable
  § 103 obviousness
  Patents in suitUS 11,828,425
• Apple Inc. v. Memoryweb, LLCAll claims unpatentable
  PTAB · Jul 8, 2026 · PGR2022-00006 · APJ Jason M Repko · PGR · Remand

  On remand, the Board held claims 1–59 unpatentable: claims 1–6, 8–37, 40–44, and 49–59 over A3UM under §103, and claims 6, 7, 38, and 39 for lack of written description under §112.

  RulingsRemand decision

  • RemandOther

    “On remand, the Board is to determine “[w]hether the alleged inconsistency in [Petitioner’s] treatment of map images compared to other first/second versions of claim elements supports rejecting [Petitioner’s] theory on claim-construction or other merits grounds is a matter for the Board to consider in the first instance on remand, constrained by any relevantly similar now-final findings of fact and conclusions of law in the ’020 PGR and related proceedings” (CAFC Dec. 16). Thus, the two issues on remand are (1) the construction of the second map image and (2) whether A3UM teaches or suggests the claimed “second map image” under that construction.” slip op. at 10

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A person of ordinary skill in the art in 2011 would have had (1) at least a bachelor’s degree in computer science, computer engineering, or electrical engineering, and (2) at least one year of experience designing graphical user interfaces for applications such as photo management systems. Pet. 12 (citing Ex. 1003 ¶¶ 44–46). In the Institution Decision and Final Written Decision, we applied Petitioner’s proposed definition. Inst. Dec. 12; FWD 30–31. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art. PO Resp. 7. We continue to find that the skill level identified by Petitioner (Pet. 12) is consistent with the record. Thus, we use the same definition here that we used in the Institution Decision and Final Written Decision.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “c. Analysis We agree with Petitioner that the “second map image” should be construed as the map image in the second person view. Reply 5. Under Petitioner’s proposed construction, the terms “first” and “second” identify which person view that the map image is within. Id. The map image’s connection to the person view is important to how the user interacts with the interface because selecting the map image in one view does something different than selecting the map image in another, as recited in claims 14 and 46.” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “Here, we disagree with Patent Owner’s argument because it is based on the premise that the second map image is different from the first in a way that is not reflected in the claims. See Section II.C.3 supra. Even if “the claims consistently use the terms ‘first’ and ‘second’ to refer to separate and distinct elements,” A3UM’s first and second map images are separate and distinct elements for at least the reason they are included in separate and distinct views in the interface. See Pet. 63; Reply 5. As discussed in Section II.C.3, the second map image is the map image in the second person view. Here, Petitioner sufficiently shows that A3UM provides the same functionality for each person, including displaying the person in the Faces view with their name within A3UM’s overall user interface. See Pet. 62 (citing Ex. 1003, ¶215; Ex. 1005, 418–420). Patent Owner does not dispute this. See PO Resp.; Sur-reply. For the same reasons why A3UM teaches the “first map image” with respect to a first person view recited in claims 1 and 31, Petitioner has shown that A3UM also teaches the “second map image” in the second person view. See FWD 53–56. In sum, Patent Owner’s arguments are unpersuasive because they are based on an incorrect claim construction, and Petitioner has shown that claims 13 and 45 are unpatentable. 5. Claims 14–16 and 46–48 Apart from the arguments analyzed above, Patent Owner does not present separate arguments directed to the subject matter of claims 14–16 burden to show that the challenged claims are unpatentable. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015). We have reviewed Petitioner’s arguments and evidence submitted in connection with the remaining limitations and find them persuasive as they are consistent with and supported by the evidence of record. See Pet. 63–64. Thus, Petitioner has shown that claims 14–16 and 46–48 are unpatentable over A3UM.” slip op. at 14

  Patent outcomesUS 11,017,020 unpatentable
  Claim construction§ 103 obviousness§ 112 disclosure
  Patents in suitUS 11,017,020
• AT&T Services, Inc. / Cellco Partnership D/B/A Verizon Wireless et al. v. Pegasus Wireless Innovation LLCAll claims unpatentable
  PTAB · Jun 2, 2026 · IPR2025-00083 · APJ Kristen L Droesch · IPR · Final written decision

  Claims 1–9 are unpatentable as obvious over Takeda and Yan; the Board found the alternative Marinier, Yan, and R1-1711853 ground insufficient.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had “a bachelor’s degree in electrical engineering, computer engineering, or a related discipline, knowledge of the relevant 3GPP standards” and “at least 2 years of experience working in a field involving wireless communications.” Pet. 10 (citing Ex. 1002 ¶¶ 38–40). According to Petitioner, a “person with a different degree but with additional relevant experience could still qualify if the additional experience compensates for the different educational background.” Id. Petitioner also asserts a “person with less than 2 years of experience working in a field involving wireless communications could still qualify if the person has additional education that compensate[s] for their lesser experience.” Id. Patent Owner does not dispute Petitioner’s proposed level of skill. See generally PO Resp. We find that “at least” in Petitioner’s formulation of the level of skill in the art is vague and open-ended. Otherwise, we adopt Petitioner’s formulation of the level of ordinary skill in the art, because it appears consistent with the ’463 Patent Specification and the prior art of record.” slip op. at 8

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached

    “Petitioner asserts that elements 1[b] and 1[c] constitute a mean-plus- function limitation under 35 U.S.C. § 112(f) and Patent Owner disputes Petitioner’s assertion. See Pet. 5–7; PO Resp. 11–13. As demonstrated below, there is no dispute as to whether the prior art teaches limitations 1[b] and 1[c] under Petitioner’s claim construction. Therefore, we need not address whether 35 U.S.C. § 112 (f) applies. “The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “We do not agree with Patent Owner’s arguments disputing Petitioner’s backward compatibility rationale for combining the teachings of Yan and Takeda. Patent Owner’s arguments are misplaced because they are premised incorrectly on Takeda’s teachings being limited to 5G NR (i.e., standalone 5G NR), and the proposed combination requiring “mixing standards and behaviors.” To the contrary, Petitioner explicitly asserts that “Takeda states that its teachings are applicable to both 4G and 5G”––i.e., non-standalone 5G. Pet. 14 (citing Ex. 1007 ¶ 239). Likewise, instead of mixing 5G and 4G standards and behaviors as argued by Patent Owner, Petitioner merely proposes retaining Yan’s 4G method of allocating UL channel resources sets with Takeda’s teaching of 5G NR BWPs. See Pet. 14–15. We credit Dr. Roy’s testimony that a person of ordinary skill in the art would have been motivated to modify Takeda’s teachings with Yan’s teachings to provide Takeda with backwards network capability because it is supported by the cited evidence of record. See Ex. 1002 ¶¶ 105, 106 (citing Ex. 1007 ¶ 239; Ex. 1031, 1, 3; Ex. 1033, 5:23–31; Ex. 1034, 10; Ex. 1035, 1, 5; Ex. 1037, 31). Moreover, as pointed out by Petitioner, Dr. Shimony’s deposition testimony regarding the usefulness of backward compatibility and the importance of a non-standalone UE having the ability to communicate over both 4G and 5G standards supports Dr. Roy’s testimony, yet undermines Patent Owner’s arguments. See Ex. 1050, 178:16–182:16; Pet. Reply 14–15. Based on the entire record developed during trial, we are persuaded by a preponderance of the evidence that Petitioner provides sufficient articulated reasoning with rational underpinning to support the conclusion that it would have been obvious to a person of ordinary skill in the art to modify Takeda’s teachings with Yan’s teachings to provide Takeda with backwards network compatibility.10 See Pet. 13–15; KSR, 550 U.S. at 418.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “We credit Dr. Roy’s testimony that a person of ordinary skill in the art would have been motivated to modify Takeda’s teachings with Yan’s teachings to provide Takeda with backwards network capability because it is supported by the cited evidence of record. See Ex. 1002 ¶¶ 105, 106 (citing Ex. 1007 ¶ 239; Ex. 1031, 1, 3; Ex. 1033, 5:23–31; Ex. 1034, 10; Ex. 1035, 1, 5; Ex. 1037, 31). Moreover, as pointed out by Petitioner, Dr. Shimony’s deposition testimony regarding the usefulness of backward compatibility and the importance of a non-standalone UE having the ability to communicate over both 4G and 5G standards supports Dr. Roy’s testimony, yet undermines Patent Owner’s arguments. See Ex. 1050, 178:16–182:16; Pet. Reply 14–15. Based on the entire record developed during trial, we are persuaded by a preponderance of the evidence that Petitioner provides sufficient articulated reasoning with rational underpinning to support the conclusion that it would have been obvious to a person of ordinary skill in the art to modify Takeda’s teachings with Yan’s teachings to provide Takeda with backwards network compatibility.10 See Pet. 13–15; KSR, 550 U.S. at 418.” slip op. at 15

  Patent outcomesUS 10,638,463 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,638,463
• Tableau Software, LLC v. Icharts LLCAll claims unpatentable
  PTAB · May 7, 2026 · IPR2024-01387 · APJ Iftikhar Ahmed · IPR · Final written decision

  Claims 1–16 are unpatentable under the instituted obviousness grounds, including Becerra, the QlikView Manuals, and combinations with other references.

  RulingsFinal written decision

  • ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part

    “why it is trustworthy and how it archives dates by which the webpages were accessible, as this is an information resource on which librarians reasonably rely. See FED. R. EVID. 703. We agree with Petitioner that Dr. Hall-Ellis does have personal knowledge of the facts stated in the remaining testimony (e.g., what she actually downloaded from websites), and that FEDERAL RULE OF EVIDENCE 602 is inapplicable to her testimony offered as an expert. See Pet. Opp. 5–6 (citing Ex. 1030 ¶¶ 26, 29–32, 35, 37–39). We find her testimony to be relevant to the issues presented and specifically to whether the QlikView documents were publicly accessible. We also find no danger that the testimony would confuse the issues or mislead the Board or present unfair prejudice to Patent Owner. Accordingly, we deny Patent Owner’s Motion as to the remaining portion of Dr. Hall-Ellis’s declaration.” slip op. at 92

  • Strike new argumentNew argument disregardedGranted

    “FURTHER ORDERED that Petitioner’s Motion to Strike portions of Patent Owner’s Reply on its Motion to Exclude (Paper 32) is granted; and” slip op. at 102

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “1. Motivation to Combine Becerra and Couckuyt Petitioner argues that a person of ordinary skill in the art would have been motivated to combine the teachings of Becerra and Couckuyt because such a person would have recognized that Couckuyt discloses useful techniques of assigning data to Becerra’s charts, including assigning data to each axis. Pet. 34 (citing Ex. 1005 ¶¶ 19, 52, Fig. 5; Ex. 1003 ¶ 224). Petitioner contends that Couckuyt discloses associating data from a “spreadsheet document” with a chart, such as a “bar graph.” Id. at 35 (citing Ex. 1006, 6:1–37; Figs. 3a, 3c). below. Petitioner’s annotations to Figure 4 identify “Drop Zones” in red and “Data Fields” in Blue. Id. at 36. Petitioner contends Couckuyt discloses a “drag-and-drop user interface (DDUI) . . . associated with a data source, such as the two-dimensional data source 300,” and Figure 4 illustrates the DDUI permitting “value data fields and the characteristic data fields . . . to be dragged and dropped into drop zones.” Id. at 35–36 (citing Ex. 1006, 7:10–13). Petitioner contends that a “primary benefit of the charting DDUI is that the user can quickly change the data that is being presented in the chart,” and using Couckuyt’s techniques, a user can “quickly change the data” and see the desired effects. Id. at 36 (citing Ex. 1006, 1:18–19; Ex. 1003 ¶ 228). Petitioner contends that when Becerra’s control panel includes multiple charts, Couckuyt’s techniques would allow dragging-anddropping data from a data source to multiple charts, and would simplify the process of assigning data to multiple control panel components. Id. at 36–37 skill in the art would have also had a reasonable expectation of success combining Becerra with Couckuyt because the combination would amount to nothing more than incorporating Couckuyt’s well-known drag-and-drop techniques into Becerra’s system. Id. at 37 (citing Ex. 1003 ¶¶ 229–231). Patent Owner responds that Couckuyt focuses on selecting a data icon that corresponds to dragging and dropping data fields, not dragging and dropping data, while Becerra teaches that selecting various data ranges from the spreadsheet is desirable. PO Resp. 36–37 (citing Ex. 1004 7:48–52; Ex. 2001 ¶ 146). According to Patent Owner, a person of ordinary skill in the art would not have been motivated to merely select data fields that do not limit the selected data in any way. Id. Patent Owner further argues Becerra’s method of binding components to a spreadsheet range and extracting formulas from a spreadsheet teaches away from the multiple chart generation scheme of Couckuyt that uses drag and dropping of data fields. Id. at 37. According to Patent Owner, Couckuyt is directed to the need for a charting DDUI that can generate multiple charts at the same time and such a need does not exist in Becerra which in turn is focused on creating a control panel that is an interactive graphics simulation. Id. (citing Ex. 1004, 1:66–67, 2:5–8; Ex. 1005 ¶ 11; Ex. 2001 ¶ 148). Based on our review of the complete record, we determine that” slip op. at 31

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “2. Whether QlikView Manuals Qualify as Prior Art Petitioner argues that “the QlikView Manuals describe a well-known system and are printed publications available to the public at least by July 8, 2008.” Pet. 7–9. Petitioner offers ample evidence to demonstrate the QlikView Manuals were publicly accessible by July 8, 2008. See id. (citing Ex. 1008; Ex. 1009; Ex. 1014–1023; Ex. 1003 ¶ 129–140; Ex. 1030;11 Ex. 1068 ¶¶ 4–7; Ex. 1032; Ex. 1033). Petitioner contends in 2008, QlikView was a well-known software product sold by QlikTech International AB (“QlikTech”). Id. at 8 (citing Ex. 1003 ¶ 129; Ex. 1030 ¶ 23; Ex. 1068 ¶¶ 4–7). Petitioner asserts that QlikTech announced that QlikView version 8.50 was scheduled for release on June 30, 2008, and QlikTech’s website added the “QlikView 8.50” hyperlink by July 8, 2008. Id. (citing Ex. 1003 ¶¶ 129–131; Ex. 1022, 1; Ex. 1068 ¶ 7). Petitioner contends that, as of July 8, 2008, a person of ordinary skill in the art would have understood that they could view the QlikView Manuals in the installation package. Id. (citing Exs. 1014–1017; Ex. 1003 ¶¶ 131–132; Ex. 1068 ¶ 7). Petitioner further contends that the QlikView Manuals were also available on QlikTech’s website as of this 11 As discussed below (see infra § IV.A), we grant Patent Owner’s Motion to Exclude as to certain portions of Exhibit 1030 and do not give them any weight. However, we deny Patent Owner’s Motion as to the remaining portions of Dr. Hall-Ellis’s testimony as well as Ms. Lofton’s testimony and various other exhibits proffered by Petitioner to show public accessibility of the QlikView manuals as of July 8, 2008. QlikView 8.50 was published on July 8, 2008. Id. at 8–9 (citing Exs. 1008, 1009, 1017, 1059, 1060; Ex. 1030 ¶¶ 29, 37). In its Patent Owner Response, Patent Owner does not contest that the QlikView Manuals were published and publicly available by July 8, 2008. PO Resp. 50 n.2 (noting only that Patent Owner intends to move to exclude evidence Petitioner relies on to establish the publication date for QlikView Manuals); Tr. 45:3–19. We are persuaded that Petitioner has shown by a preponderance of the evidence that the QlikView Manuals were publicly available as of July 8, 2008.12” slip op. at 50

  Patent outcomesUS 8,271,892 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,271,892
• Snap Inc. v. You Map Inc.All claims unpatentable
  PTAB · May 4, 2026 · IPR2022-00568 · APJ Jason M Repko · IPR · Remand

  Claims 1–20 remain unpatentable; the contingent motion to amend is denied because the proposed substitute claims would have been obvious over Feldman and Jackson in view of ordinary skill.

  RulingsRemand decision

  • RemandDecided for patent owner

    “challenge fails even if Petitioner’s summary of the references were correct because Petitioner did not present a sufficient reason to modify Feldman to include a current zoom level in its search request. FWD 56. The Federal Circuit vacated this finding specifically and contemplated that there would be a “consideration of obviousness” on remand. CAFC Dec. 10–11. That consideration requires more than determining whether any one reference teaches a current zoom level and a search, generally. See FWD 56 (quoting MTA Reply 10). Here, Petitioner’s challenge is based on modifying the Feldman-Jackson combination. So the Board must determine on remand whether the Feldman-Jackson combination in view of knowledge of a POSA meets the claim limitations at issue. We also disagree to the extent that Petitioner argues that the Board is precluded from considering additional arguments on the relevant issues on remand. The Board’s preliminary guidance on the Motion to Amend stated that Petitioner’s obviousness rationale was based on convenience and this reason was not sufficiently supported: reference lacks a sufficient explanation of why one of ordinary skill in the art would have added the zoom levels in the prior art to Feldman. See id. At most, Petitioner argues that it would be convenient to “specify the area the user desires to search for content” in this way. Id. at 14. But, on this record, Petitioner has not sufficiently explained why it would be convenient to do so in Feldman. See id. Nor has Petitioner sufficiently explained how or why the prior-art features confer this convenience. See id. MTA PG, 13. Because the Board’s conclusion turned on the lack of sufficient explanation, the briefing that followed was limited to Petitioner’s obviousness rationale. See, e.g., MTA Reply 9–12, MTA Sur-reply 1–12. Under these specific circumstances, we determine that it would be procedurally fair to fully consider the arguments on remand about whether the cited prior art teaches or suggests the limitations recited in the substitute claims. And, as discussed above, the Federal Circuit has directed the Board to consider obviousness. CAFC Dec. 10–11.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not contest Petitioner’s proposed level of ordinary skill in the art. See PO Resp.; Sur-reply. Patent Owner’s expert, Dr. Shamos, and provides substantially the same expression of the level of ordinary skill in the art. Ex, 2003 ¶¶ 30–31; see FWD 6–7. In this Decision, we apply Petitioner’s proposed definition.” slip op. at 6

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend, deniedDenied

    “In sum, Petitioner has shown that replacing Feldman’s radius with Badger’s zoom level meets all the limitations of the claim considered in the context of the Feldman-Jackson combination. Also, the evidence shows a motivation to modify the radius in Feldman’s search request to instead be based on the zoom-level parameter disclosed in Badger. See Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380–81 (Fed. Cir. 2023) (“There is a motivation to combine when a known technique ‘has been used to improve one device, and a person of ordinary skill in the art would recognize that it would improve similar devices in the same way,’ . . . using the ‘prior art elements according to their established functions.’”) (citing KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 417 (2007)). substitute claim 21 is unpatentable over Feldman, Jackson, and knowledge of one of ordinary skill in the art. See Koninklijke Philips N.V. v. Google LLC, 948 F.3d 1330, 1337 (Fed. Cir. 2020) (“[U]nder 35 U.S.C. § 103, the obviousness inquiry turns not only on the prior art, but whether ‘the differences between the claimed invention and the prior art are such that the claimed invention as a whole would have been obvious . . . to a person having ordinary skill in the art to which the claimed invention pertains.’”).” slip op. at 19

  • Strike new argumentNew argument consideredDecided for patent owner

    “precluded from considering additional arguments on the relevant issues on remand. The Board’s preliminary guidance on the Motion to Amend stated that Petitioner’s obviousness rationale was based on convenience and this reason was not sufficiently supported: reference lacks a sufficient explanation of why one of ordinary skill in the art would have added the zoom levels in the prior art to Feldman. See id. At most, Petitioner argues that it would be convenient to “specify the area the user desires to search for content” in this way. Id. at 14. But, on this record, Petitioner has not sufficiently explained why it would be convenient to do so in Feldman. See id. Nor has Petitioner sufficiently explained how or why the prior-art features confer this convenience. See id. MTA PG, 13. Because the Board’s conclusion turned on the lack of sufficient explanation, the briefing that followed was limited to Petitioner’s obviousness rationale. See, e.g., MTA Reply 9–12, MTA Sur-reply 1–12. Under these specific circumstances, we determine that it would be procedurally fair to fully consider the arguments on remand about whether the cited prior art teaches or suggests the limitations recited in the substitute claims. And, as discussed above, the Federal Circuit has directed the Board to consider obviousness. CAFC Dec. 10–11.” slip op. at 11

  Patent outcomesUS 10,616,727 unpatentable
  § 103 obviousnesscites KSR
  Patents in suitUS 10,616,727
• Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentable
  PTAB · Apr 15, 2026 · IPR2025-00187 · APJ Debra L Dennett · IPR · Final written decision

  Claims 1–17 are unpatentable under § 103, principally because Chang in view of Jin renders them obvious; the Jin/Feldmann grounds were not shown.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art would have been someone with an advanced degree involving the disciplines of electrical engineering, applied physics, chemistry, or materials science, and at least two years of experience designing, developing, or researching in the field. Alternatively, that person would have had a bachelor’s degree in electrical engineering, applied physics, or materials science, and at least three years of experience designing, developing, or researching in the field. Pet. 4 (citing Ex. 1003 ¶ 49).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard. Without an apparent reason to modify the teachings of Jin and Feldmann to” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

    “On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17

  Patent outcomesUS 10,230,009 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,230,009
• Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentable
  PTAB · Apr 15, 2026 · IPR2025-00917 · APJ Debra L Dennett · IPR · Final written decision

  Claims 1–17 are unpatentable under § 103 over Chang and Jin, alone or with Seo or Watanabe; the Jin and Feldmann grounds were not shown.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable

    “On this complete trial record, we agree with Patent Owner. It is improper to base a conclusion of obviousness upon facts gleaned only through hindsight. “The invention must be viewed not after the blueprint has been drawn by the inventor, but as it would have been perceived in the state of the art that existed at the time the invention was made.” Sensonics, Inc. v. Aerosonic Corp., 81 F.3d 1566, 1570 (Fed. Cir. 1996) (citing Interconnect Planning Corp. v. Feil, 774 F.2d 1132, 1138 (Fed. Cir. 1985)). Therefore, “to establish a prima facie case of obviousness based on a combination of elements disclosed in the prior art, the [Petitioner] must articulate the basis on which it concludes that it would have been obvious to make the claimed invention.” Id. Impermissible hindsight is inferred when the specific understanding or principle within the knowledge of one of ordinary skill in the art that would motivate one (with no knowledge of the claimed invention) to make the proposed combination has not been explained. In re Rouffet, 149 F.3d 1350, 1358 (Fed. Cir. 1998).” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable

    “Patent Owner focuses on Chang’s description in paragraph 76 of a single configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32

  Patent outcomesUS 10,230,009 unpatentable
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,230,009
• Runergy Alabama Inc. / Runergy USA Inc. et al. v. Trina Solar Co., Ltd.All claims unpatentable
  PTAB · Apr 15, 2026 · IPR2025-00006 · APJ Debra L Dennett · IPR · Final written decision

  Claims 1–17 are unpatentable under § 103, principally over Chang and Jin; the Board rejected the Jin and Feldmann combinations for lack of a reason to combine.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In light of the record before us, we adopt Petitioner’s proposal regarding the level of ordinary skill in the art. Based on our review of the ’009 patent and the prior art of record, we determine that the definition offered by Petitioner comports with the qualifications a person would have needed to understand the ’009 patent and the prior art.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner contends that “[n]o claim construction is believed to be necessary to resolve this Petition.” Pet. 24. Patent Owner does not address claim construction. See generally Resp.; Sur-reply. For purposes of this Decision, we need not expressly construe any claim terms. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (holding that “only those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”); see also Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs. in the context of an inter partes review).” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableMotivation not foundNot shown unpatentable

    “However, Petitioner proposes to remove the tunnel oxide layer from the edge and offers little explanation of why the skilled artisan would apply Jin’s gap- T isolation region to both of Feldmann’s polysilicon and tunnel oxide layers. As noted above, Petitioner states that the skilled artisan would have included Jin’s gap-T isolation region in order to prevent shorting. Pet. 26. Petitioner’s reasoning is questionable—supported only by the conclusory testimony of Dr. Banerjee. Dr. Banerjee’s testimony offers no more evidentiary support than provided in the Petition. Compare Ex. 1003 ¶ 116 with Pet. 26). Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” See Magnum, 829 F.3d at 1380. We acknowledge Dr. Banerjee’s testimony that the combination of Jin’s gap-T isolation region would prevent shorting and that extending the tunnel oxide layer the edge “could trap impurities and create negative fixed oxide charges, which could then create a p-type inversion in the n-type base substrate, leading to a leakage path to the p-type emitter on the front of the solar cell” (Ex. 1003 ¶ 116 (emphasis added)) but are not convinced by his equivocal testimony. Notably too, neither Jin nor Feldmann discuss issues relating to trapped impurities and Petitioner, as well as Dr. Banerjee, fail to direct our attention to any record evidence to support their contentions. Rather, we are persuaded by Dr. Peckerar’s testimony that as a general rule in semiconductor process technology, a bare silicon surface should not be left unpassivated after processing. Elemental silicon is highly chemically reactive. As such, the bare surface is a “magnet” for defects and contamination. Leaving the tunnel oxide in place across the entire substrate backside would reduce this problem. Ex. 2001 ¶ 142. Dr. Peckerar further explains that a person of ordinary skill in the art would have known how to avoid shorting and leakage. In particular, he testifies that the manner by which charge is transported through a tunnel oxide can be controlled by adjusting manufacturing parameters such as time, temperature, thickness, and ambient impurities. A POSITA would plainly have adjusted these parameters to ensure that the tunnel oxide operates as intended (i.e., minimizes recombinant losses while transporting charge carriers to the backside of the solar cell) while avoiding undesirable leakage current. Because unwanted leakage charge can be avoided via other means during manufacture, there would have been no reason to reduce the physical extent of the tunnel oxide. Ex. 2001 ¶ 152 (referring to Ex. 2001 ¶¶ 149–151). Moreover, Dr. Peckerar testifies that “Dr. Banerjee also appears to be arguing that incorporation of impurities into the oxide will produce a MOSFET-like structure, with the contaminated oxide acting as a MOS gate leading to enhanced leakage,” but, for that to occur, “the source and drain areas would need to be of the same type.” Ex. 2001 ¶ 159. Here however, “the tunnel oxide layer is located between an n-type polysilicon layer and p-type frontside emitter layer” so “[n]o MOSFET-like structure can form because the source and drain are of different types.” Ex. 2001 ¶ 159. Neither Petitioner nor Dr. Banerjee address or dispute this testimony. See generally Reply; Ex. 1037. We credit Dr. Peckerar’s testimony in this regard.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “configuration in which the emitter area and back surface field area are not adjacent to each other, thus eliminating “the necessity of performing an isolation process when the emitter area [] and the back surface field are [] are formed to be adjacent to each other.” Resp. 42 (citing Ex. 1013 ¶ 76). In so doing, Patent Owner side steps Chang’s unambiguous definition that “‘entirely formed’ means that an element such as a layer is formed over an entire surface without an empty area or a non-coverage area, or is formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Ex. 1013 ¶¶ 45, 51, 56, 62 (emphasis added). Chang discloses that a first tunneling layer, a first portion of an emitter area, a second tunneling layer, and a back surface field area may each be “formed over an entire area excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like.” Id. Chang’s definition of “entirely formed” (“excluding pre-designated or inevitably formed regions such as periphery region, isolation region or the like”) implies use of a mask. See Chang ¶ 62; Tr. 15:20–17:11. Dr. Banerjee testifies that the need to electrically isolate the emitter region from the back surface field was well known in the field, and both Chang and Jin teach backside isolation regions. Ex. 1003 ¶¶ 73, 217 (citing Ex. 1023 § 1). Chang also discloses that the emitter area may be formed by thermal diffusion, ion implantation or the like. Ex. 1013 ¶ 98. Petitioner persuasively argues that Chang’s disclosure of thermal diffusion of the emitter layer would result in dopants diffused into not only the top surface of the substrate, but also the exposed lateral surfaces, a problem also noted in Jin. See Pet. 11–12; Reply 6–7; Ex. 1003 ¶ 71; Ex. 1009 ¶¶ 57–58. Jin discloses avoiding shorting of the emitter layer and back surface field layer by edge isolation on the back surface field layer using a mask to create a “gap-T.” Ex. 1009 ¶¶ 57–58, 83. Chang discloses excluding a tunneling layer and a base surface field area from periphery region and isolation region. Ex. 1013 ¶¶ 56, 62. Using a mask, as implied in Chang and explicitly disclosed in Jin, would “pre-designate” and/or “inevitably form” the regions where the tunneling layer and back surface field area are excluded. We credit Dr. Banerjee’s testimony that one of ordinary skill in the art reviewing Chang would therefore understand the importance of implementing the isolation region in Chang’s device, and would therefore be motivated to look to other references, such as Jin (which was assigned to the same original assignee as Chang, LG Electronics, EX1009-Jin, face; EX1013-Chang, face) to understand details regarding Chang’s isolation region.” slip op. at 32

  Patent outcomesUS 10,230,009 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,230,009

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.