• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.

  RulingsFinal written decision

  • BurdenFwd all claims patentableNot shown unpatentable

    “4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18

  • Skill levelSkill level petitioner adoptedOther

    “A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Apple Inc. v. Resonant Systems, Inc.Some claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00806 · APJ Norman H Beamer · IPR · Final written decision

  Claims 1–8, 15–17, and 20 are unpatentable under § 103; claims 14 and 19 were not shown unpatentable because the proposed paramagnetic flux paths in Wakuda lacked adequate support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 33. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 3. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’830 patent specification.” slip op. at 11

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claims 1, 19, and 20 include means plus function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 3–7; PO Resp. 6–14. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claims 1, 19, and 20 are means plus function limitations. Pet. 3–7; PO Resp. 6–14. Construing a means plus function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 12

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for petitioner

    “Therefore, the specification clearly links the function of “control[ing] supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” at least to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.11 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs to the switch; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law 11 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:17–20. that limits the structure to that necessary to perform the claimed function. 12 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “to include the ability disclosed in Ramsay to allow a user to customize and store parameters associated with haptic effects, such as creating “haptic track files” that specify variations in the amplitude and frequency of the effect over time to achieve a desired effect. Pet. 46–47 (citing Ex. 1006 ¶¶ 15, 25– 28, 37; Ex. 1003 ¶¶ 192–193). Petitioner argues that this combination would have been motivated by the desire to expand the functionalities of haptic devices to allow end users to create and customize haptic effects, to provide a fuller haptic experience, and to be able to store haptic effects to save processing power compared to real-time generated effects. Id. at 47–49 (citing Ex. 1006 ¶¶ 14–15, 30, 47, 53–57; Ex. 1003 ¶¶ 194–196). Petitioner argues that this making combination would have had a reasonable expectation of success given that both references deal with linear actuators, both disclose storing frequency and amplitude values, and the combination involves routine knowledge of software techniques. Id. at 49–50 (citing Ex. 1004, 2:3–9; Ex. 1006 ¶¶ 17, 26–28; Ex. 1003 ¶¶ 197–198). Petitioner further argues that it would have been obvious to use the H-bridge switch of Rossi as part of the Gregorio actuator drive circuit 16 in the asserted Gregorio-Ramsay combination to periodically switch the polarity of drive signals to electric coil 28 of Gregorio, and thus oscillate magnet 27, under the control of a signal from processor 12 of Gregorio. Pet. 56 (citing Ex. 1003 ¶ 211). Petitioner argues that this combination would have been motivated because Gregorio does not disclose implementation details and therefore one of ordinary skill would have looked toward teachings like Rossi to fill in those details, and that an H-bridge switch was a well-known example circuit for implementing a change in “current flow direction/polarity” for “push” and “pull” actions in a system, and was a simple, cost-effective, and reliable circuit design. Id. at 56–58 (citing Ex. 1020, Abstr., Figs. 4, 6, 1:65–3:54; Ex. 1003 ¶¶ 212–217). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques through routine circuit design considerations and software instructions for generating the control signal. Id. at 58 (citing Ex. 1003 ¶ 218). Petitioner further argues that it would have been obvious to modify the Gregorio-Ramsay-Rossi combination, using the control algorithm disclosed in Aldrich, to replace the monitoring technique of Gregorio with that of Aldrich to maintain a resonance frequency by incrementing or decrementing the drive frequency. Pet. 58–59 (citing Ex. 1004, 4:22–28, 4:42–48; Ex. 1021, 2; Ex. 1003 ¶ 219). Petitioner’s expert provides implementation details of Aldrich, including that the Aldrich hill-climb technique would use a Boolean value to indicate whether the frequency was being increased, with local variables set to default values, and use integer values when processing sensor signals. Id. at 59–60 (citing Ex. 1021, 2; Ex. 1003 ¶¶ 220–222). Petitioner argues that these modifications would have been motivated to improve the Gregorio system using the Aldrich feedback algorithm for targeting a resonant frequency, given that the Gregorio approach had shortcomings that required a monitoring period with reduced haptic feedback, receiving weak EMF signals. Id. at 61–62 (citing Ex. 2004, 3:65–5:55, 5:63–65; Ex. 1021, 1–3; Ex. 1003 ¶¶ 223–227). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques for improvement to yield predictable results, readily implemented via software executed by the microprocessor. Id. at 62–63 (citing Ex. 2004, 2:44–50; Ex. 1021, 2; Ex. 1003 ¶ 229). Patent Owner does not address Petitioner’s arguments regarding the” slip op. at 27

  Patent outcomesUS 9,941,830 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,941,830
• Apple Inc. v. Resonant Systems, Inc.All claims unpatentable
  PTAB · Oct 9, 2025 · IPR2025-00680 · APJ Karl D Easthom · IPR · Final written decision

  Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionTerm construed board ownMixed

    “supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.10 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs configured to operate a switch or other circuit; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law that limits the structure to that necessary to 10 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:7–10. perform the claimed function. 11 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “The record, including testimony by Dr. Hannaford (Ex. 1003; Ex. 1049), supports Petitioner’s rationale, and shows that one of ordinary skill would have been motivated to combine Gregorio, Ramsay, and Wakuda in the manner proposed. Patent Owner does not address Petitioner’s showing for combining these references with any particularity. See generally PO Resp. We discuss below Patent Owner’s argument that Petitioner’s showing as to limitation 2.f based on the combination of Gregorio and Ramsay is conclusory.” slip op. at 34

  Patent outcomesUS 8,860,337 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,860,337
• Apple Inc. v. Resonant Systems, Inc.All claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00807 · APJ Karl D Easthom · IPR · Final written decision

  Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.

  RulingsFinal written decision

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claim 2 includes means-plus- function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 2–6; PO Resp. 7–15. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionDecided for petitioner

    “1. Construction of “Driving Component” Petitioner contends that the claimed function of “driving component” is “drives the moveable component to oscillate within the housing.” Pet. 5; Ex. 2002, 2. Petitioner asserts that the corresponding structure is a coil of conductive wire 420” (Figures 4A–4G); “coil 514” (Figures 5A–5B); “coil 626” (Figure 6); “electromagnet” (Figures 10-11); “additional coils 1202 and 1204” (Figure 12); “coils 1302 and 1304” (Figure 13); “driving coils 1412 and 1414” (Figure 14); “coil 1510” (Figures 15–17); “stator coils” (Figures 24A-25). Pet. 5–6 (citing Ex. 1001, 5:2–34, 5:54–59, 6:32–35, 9:11–52, 9:64–10:22, 14:59); Ex. 2002, 2.). Patent Owner states that it “does not believe that the phrase involving a ‘driving component’ needs to be construed in order to resolve any issue in this proceeding.” PO Resp. 7. Patent Owner agreed to the above construction in the Apple Litigation, and the court adopted this construction. Ex. 2002, 2. The record supports Petitioner’s position and we adopt it.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that a person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “In contrast to Petitioner’s showing, at the passage cited by Patent Owner, Dr. Goossen, Patent Owner’s expert, does not provide a basis for his opinion that “the combined system of Gregorio-Ramsay-Rossi-Aldrich does not teach the claimed output to the power supply.” Ex. 2009 ¶ 156; PO Resp. 21 (citing Ex. 2009 ¶ 156). To the extent Dr. Goossen addresses the issue, like Patent Owner, Dr. Goossen concedes that “a POSITA would recognize in the [annotated drawing of Gregorio supplied by Petitioner] that a power supply is required that is not shown.” Ex. 2009 ¶ 116. And also like Patent Owner, Dr. Goossen concludes that Petitioner’s rationale that an “unshown power supply receives a signal from the processor is a sweeping conclusion that does not follow.” Id. For the reasons discussed above in connection with Patent Owner’s parallel arguments, this testimony is conclusory and unsupported. Primarily, it does not adequately address Petitioner’s showing and Dr. Hannaford’s testimony, discussed above, which relies on Gregorio’s statement that “[p]rocessor 12 outputs the control signals to drive circuit 26 which includes electronic components and circuitry used to supply LRA 18 with the required electrical current and voltage to cause the desired haptic effects.” Ex. 1004, 2:36–39 (emphases added). Dr. Goossen and Patent Owner also do not address the initial finding in the Institution Decision that “[t]he ’337 patent does not disclose any detail or structure for the controllable power supply, indicating that such a controllable power supply was well-known.” Inst. Dec. 30 (citing Ex. 1001, 6:33–35 (“The power supply 612 receives a control input 624 from the CPU to control the current supplied to the H-bridge switch for transfer to the coil 626.”)).16 And while Dr. Goossen contends that Dr. Hannaford’s reliance on Ramsay to further suggest control of the power supply is conclusory because “Dr. Hannaford’s statement about ‘the current provided from a power supply to the driving component’ has nothing to do with Ramsay’s disclosure,’” Dr. Goossen addresses Ramsay and Gregorio in isolation, without adequately addressing the combination, specifically where Gregorio teaches or suggests controlling a power supply in order to provide desired LRA amplitude and frequency haptic effects, which is in line with Ramsay’s teaching of user-customizable parameters to control amplitude and frequency for the same purpose. See Ex. 2009 ¶ 126; Pet. 53–54 (summarized above). Therefore, the Petition shows persuasively that Gregorio’s processor controls Gregorio’s power supply to provide power to its haptic unit or that such power supply control would have been obvious in view of Ramsay in order to allow a user to control the desired haptic effect.” slip op. at 41

  Patent outcomesUS 8,860,337 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,860,337
• Apple Inc. v. Geoscope Technologies Pte. Ltd.All claims unpatentable
  PTAB · May 28, 2025 · IPR2024-00255 · APJ Annette R Reimers · IPR · Final written decision

  Claims 2, 4, and 6–10 are unpatentable as obvious over Bhattacharya and Zeng, and over Bhattacharya, Zeng, and Spain; claims 1, 3, and 11 were disclaimed.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Second, the key differences between Petitioner’s and Patent Owner’s proposed qualifications for a person of ordinary skill in the art at the time of the invention is that Patent Owner asserts “experience in wireless telecommunications and cellular technology is necessary,” as well as a background in radio frequency communications and/or navigation system technology with two years of industry experience working in the same, would be required. PO Resp. 22–23 (citing Ex. 2018 ¶ 46); see also id. 44– 45. The ’104 patent is directed to locating a wireless mobile device in a geographic region. Ex. 1001, 1:13–20; PO Resp. 44. Bhattacharya is 9 Patent Owner refers to IPR2024-01209, but the correct citation is IPR2023- 01209. See PO Resp. 22. 1005, code (57), ¶¶ 1, 13; PO Resp. 44. Zeng is directed to handoff from one cell to another in a wireless cellular communication system to achieve continuous service. Ex. 1006, 1; PO Resp. 44. Spain is directed to a method for locating the concentration of mobile radio traffic in a coverage area. Ex. 1007, code (54), ¶¶ 1, 11; PO Resp. 44. We find that there is support in the ’104 patent and prior art consistent with Patent Owner’s assertion that the qualifications of a person of skill in the art would include knowledge of radio navigation and mobile communications technology. Accordingly, we adopt Patent Owner’s proposed qualifications for a person of ordinary skill in the art.” slip op. at 8

  • Expert testimonyPetitioner expert creditedMixed

    “In this case, Patent Owner attempts to make much of Dr. Sundaresan’s statement that he had been informed of the qualifications of a person of ordinary skill in the art. See PO Resp. 41–43. Dr. Sundaresan’s testimony, however, set forth this understanding of the requisite level of skill in the art (Ex. 1003 ¶ 8). In his supplemental declaration, Dr. Sundaresan further testifies that: I agreed with this POSITA definition when preparing the Declaration, and I continue to hold the opinion that the POSITA definition is both correct and appropriate based on the disclosures of the ’104 patent and the prior art analyzed in the Declaration. Ex. 1055 ¶ 17. Dr. Sundaresan further testifies that “[i]f I did not agree with the POSITA definition, then it would not have been included in paragraph 8 of the Declaration.” Id. ¶ 18. Dr. Sundaresan’s inclusion of the definition of the level of ordinary skill in his original declaration indicates that he agrees with the definition, as confirmed by his cited subsequent testimony. We note that, even with Patent Owner’s arguments, the record is clear that Patent Owner was on notice of Petitioner’s proposed definition of the level of ordinary skill at the time of the Petition. Pet. 7; cf. Corephotonics, Ltd. v. Apple Inc., 84 F.4th 990, 1006 (Fed. Cir. 2023) (holding that Petitioner is not required to anticipate all arguments in its Petition and allowing consideration of reply where patent owner had sufficient notice of petitioner’s position and adequate opportunity to respond).” slip op. at 14

  • BurdenUnpatentable

    “Based on the evidence presented, Petitioner adequately establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to reach the Bhattacharya-Zeng combination with a reasonable expectation of success.” slip op. at 44

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “explained below, we agree with Petitioner that Patent Owner’s additional requirement of evaluating the calibration data to determine the boundaries of the area represented by a grid point should not be included in the construction of either “grid point” or “non-uniform grid point.” Instead, based on the full record, we discern no reason to alter our prior construction of “grid point” as “a point associated with representative calibration data for an area” and maintain that construction for this Final Written Decision. The construction of “grid point” we adopt is supported by the Specification of the ’104 patent. Namely, the ’104 patent discloses that “[i]n general, a non-uniform grid point (NUG) may represent the signal characteristics and/or calibration data over a given region,” and “NUGs represent an area of collected calibration data.”18 Ex. 1001, 3:50–60. The district court identified the second quoted passage, which is identically recited in the ’104 patent (see Ex. 2018, 3:56–60) as “provid[ing] a clear indication of the meaning of ‘grid point.’” Ex. 2012, 19 (emphasis added). We agree with the district court’s analysis. Although the ’104 patent does not explain how a generic “grid point” might differ from the described “nonuniform grid point,” we do not find this distinction pertinent to construing “grid point” in this case because neither party raises this issue. Also, based on the claim wording “non-uniform grid point,” a “non-uniform grid point” is a type of grid point. See Pet. Reply 3 (explaining why that plain meaning supports Petitioner’s proposed construction). Furthermore, the district court construed “grid point” only, not “non-uniform grid point.” Ex. 2012, 18–20.” slip op. at 27

  Patent outcomesUS 7,561,104 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,561,104

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.