• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Apple Inc. v. Resonant Systems, Inc.Some claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00806 · APJ Norman H Beamer · IPR · Final written decision

  Claims 1–8, 15–17, and 20 are unpatentable under § 103; claims 14 and 19 were not shown unpatentable because the proposed paramagnetic flux paths in Wakuda lacked adequate support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 33. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 3. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’830 patent specification.” slip op. at 11

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claims 1, 19, and 20 include means plus function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 3–7; PO Resp. 6–14. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claims 1, 19, and 20 are means plus function limitations. Pet. 3–7; PO Resp. 6–14. Construing a means plus function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 12

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for petitioner

    “Therefore, the specification clearly links the function of “control[ing] supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” at least to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.11 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs to the switch; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law 11 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:17–20. that limits the structure to that necessary to perform the claimed function. 12 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “to include the ability disclosed in Ramsay to allow a user to customize and store parameters associated with haptic effects, such as creating “haptic track files” that specify variations in the amplitude and frequency of the effect over time to achieve a desired effect. Pet. 46–47 (citing Ex. 1006 ¶¶ 15, 25– 28, 37; Ex. 1003 ¶¶ 192–193). Petitioner argues that this combination would have been motivated by the desire to expand the functionalities of haptic devices to allow end users to create and customize haptic effects, to provide a fuller haptic experience, and to be able to store haptic effects to save processing power compared to real-time generated effects. Id. at 47–49 (citing Ex. 1006 ¶¶ 14–15, 30, 47, 53–57; Ex. 1003 ¶¶ 194–196). Petitioner argues that this making combination would have had a reasonable expectation of success given that both references deal with linear actuators, both disclose storing frequency and amplitude values, and the combination involves routine knowledge of software techniques. Id. at 49–50 (citing Ex. 1004, 2:3–9; Ex. 1006 ¶¶ 17, 26–28; Ex. 1003 ¶¶ 197–198). Petitioner further argues that it would have been obvious to use the H-bridge switch of Rossi as part of the Gregorio actuator drive circuit 16 in the asserted Gregorio-Ramsay combination to periodically switch the polarity of drive signals to electric coil 28 of Gregorio, and thus oscillate magnet 27, under the control of a signal from processor 12 of Gregorio. Pet. 56 (citing Ex. 1003 ¶ 211). Petitioner argues that this combination would have been motivated because Gregorio does not disclose implementation details and therefore one of ordinary skill would have looked toward teachings like Rossi to fill in those details, and that an H-bridge switch was a well-known example circuit for implementing a change in “current flow direction/polarity” for “push” and “pull” actions in a system, and was a simple, cost-effective, and reliable circuit design. Id. at 56–58 (citing Ex. 1020, Abstr., Figs. 4, 6, 1:65–3:54; Ex. 1003 ¶¶ 212–217). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques through routine circuit design considerations and software instructions for generating the control signal. Id. at 58 (citing Ex. 1003 ¶ 218). Petitioner further argues that it would have been obvious to modify the Gregorio-Ramsay-Rossi combination, using the control algorithm disclosed in Aldrich, to replace the monitoring technique of Gregorio with that of Aldrich to maintain a resonance frequency by incrementing or decrementing the drive frequency. Pet. 58–59 (citing Ex. 1004, 4:22–28, 4:42–48; Ex. 1021, 2; Ex. 1003 ¶ 219). Petitioner’s expert provides implementation details of Aldrich, including that the Aldrich hill-climb technique would use a Boolean value to indicate whether the frequency was being increased, with local variables set to default values, and use integer values when processing sensor signals. Id. at 59–60 (citing Ex. 1021, 2; Ex. 1003 ¶¶ 220–222). Petitioner argues that these modifications would have been motivated to improve the Gregorio system using the Aldrich feedback algorithm for targeting a resonant frequency, given that the Gregorio approach had shortcomings that required a monitoring period with reduced haptic feedback, receiving weak EMF signals. Id. at 61–62 (citing Ex. 2004, 3:65–5:55, 5:63–65; Ex. 1021, 1–3; Ex. 1003 ¶¶ 223–227). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques for improvement to yield predictable results, readily implemented via software executed by the microprocessor. Id. at 62–63 (citing Ex. 2004, 2:44–50; Ex. 1021, 2; Ex. 1003 ¶ 229). Patent Owner does not address Petitioner’s arguments regarding the” slip op. at 27

  Patent outcomesUS 9,941,830 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,941,830
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting et al. v. Cao Lighting, Inc.Some claims unpatentable
  PTAB · Sep 28, 2023 · IPR2022-00847 · APJ Brian D Range · IPR · Final written decision

  Claims 21, 22, 25, 26, 28–30, 32–36, 40, 42–44, 47–49, 52, 53, 56–59, 62, 63, 65–68, 71–73, 77, 78, 81, 82, 85, 86, and 88–91 are unpatentable over Begemann, Krames, and Allen; claim 41 is …

  RulingsFinal written decision

  • ExcludeMotion to exclude, deniedDenied

    “Patent Owner’s argument is unpersuasive because the Krames declaration addresses the Patent Owner Response and is relevant to the issues at hand. We start with an important observation: claim 21 (the only independent claim at issue) is an apparatus claim; the claim is directed to a “semiconductor light source.” Ex. 1001, 9:52. One requirement of this apparatus is that it comprise “at least one semiconductor chip” (id. at 10:1) where the “at least one semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts.” Id. at EPRC, 1:34–36. As we explain when addressing claim construction, infra, we adopt Patent Owner’s proposed construction of “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as meaning “at least one LED chip is capable of emitting light greater than about 40 milliwatts.” See Section III.D, infra (emphasis added). Because of these recitations, Petitioner bears the burden of establishing that the prior art teaches or suggests a semiconductor chip “capable of emitting light greater than about 40 milliwatts.” As explained herein, we determine that in the Petition, Petitioner met this burden by establishing by a preponderance of the evidence that the Krames reference teaches an LED chip that has this capability. Pet. 54 (quoting Ex. 1008, 10). Notably, claim 21 does not require actual operation of anything at greater than 40 milliwatts because claim 21 is not a method claim. Petitioner never had a burden of establishing a method of running the Krames reference’s LED at this power output within a semiconductor light source.” slip op. at 12

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’961 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 19. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in the art would need to be “familiar with thermal issues.” Ex. 2015, 26:15– 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’961 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 19

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “particularly relevant.” Resp. 14–15. First, Patent Owner argues that “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” means “at least one LED chip is capable of emitting light greater 9 Petitioner states that “Patent Owner thus contends the recited ‘reflective layers’ can include transparent or semi-transparent layers that exhibit some reflectivity (e.g., SiO2) or an interface between two layers (e.g., the buffer and substrate layers) that exhibit differing indices of refraction.” Pet. 20. Patent Owner frames this as being Petitioner’s “novel construction” (Resp. 16), but Petitioner does not expressly endorse this Patent Owner contention. than about 40 milliwatts.” Resp. 14–15. Patent Owner notes that a district court already adopted this construction and notes that the “LED chip” includes LEDs, LED modules, and LED arrays but excludes laser chips, laser modules, and VCSEL chips. Id. (citing Ex. 2003, 15–18). Petitioner argues that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1–2. We adopt Patent Owner’s proposed construction because it is well supported by the record including the District Court’s reasoning. Ex. 2003, 15–18. slip op. at 20

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “It is unnecessary to construe any other claim terms in this Decision because none of the parties’ disputes turn on the meaning of other claim terms. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017).” slip op. at 22

  Patent outcomesUS 6,465,961 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 6,465,961
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.Some claims unpatentable
  PTAB · May 5, 2023 · IPR2022-00098 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 3, and 4 are unpatentable as obvious over the stated combinations; claim 2 was not shown unpatentable because the driver was not shown configured to receive the rectifier’s forward voltages.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that a person of ordinary skill in the art would have had experience in LED devices. For this reason, we apply Patent Owner’s proposed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record. However, if we were to apply Petitioner’s proposed level of skill, our Decision would not be affected.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Upon review of the entire record, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “Dr. Ducharme’s testimony that “the spacing of the chips in Zhang would not likely be so close as to create overheating issues” (Ex. 2002 ¶ 111) is unsupported by any disclosure of the actual spacing of Zhang’s chips. Consequently, his testimony that there would be no overheating concerns in Zhang due to the spacing of the chips is entitled to little, if any, weight. Dr. Ducharme further testifies that the components of Zhang’s driver “could easily increase the temperature of the LED 19 chips on the circuit board, which can cause LEDs to generate less illumination, burn out and otherwise adversely affect their performance.” Ex. 2002 ¶ 126. Dr. Ducharme further testifies that “[i]t is well-known that excessive operational temperatures can reduce the illumination provided by the LEDs, can decrease the operational lifetime of the LEDs, and if the temperature is sufficiently high, it can cause LED junction failure and a burnt-out LED.” Id. We agree with this testimony, which as discussed below, is consistent with Salam. Dr. Ducharme’s testimony concerning overheating issues caused by the driver components contradicts Patent Owner’s ’s contention that there would not be “an overheating issue with Zhang’s LED exit sign circuit in Figure 2.1.” PO Resp. 30. Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106). Patent Owner next contends it would be extremely burdensome and costly to modify Zhang to add a heat sink layer because “each of the multiple chips mounted and epoxied to Zhang’s circuit board in the exit sign would have to be modified.” PO Resp. 30 (citing Ex. 2002 ¶ 112). Dr. Ducharme’s testimony repeats the Patent Owner Response verbatim and is entitled to little, if any, weight. Ex. 2002 ¶ 112. Nonetheless, this contention is unavailing because it is based on Patent Owner’s bodily incorporation of Zhang and Salam. Patent Owner next contends that a person of ordinary skill in the art” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106).” slip op. at 27

  Patent outcomesUS 10,517,149 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,517,149
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCSome claims unpatentable
  PTAB · Dec 6, 2022 · IPR2021-00856 · APJ Ryan H Flax · IPR · Final written decision

  Claims 1–15 are unpatentable over the asserted §103 grounds; claims 17–23 were not shown unpatentable.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “persuasive and credit Dr. Kang’s testimony that Freedman’s ablating laser is incompatible with laser surgery on the lens or lens capsule during cataract surgery. Ex. 2087 ¶¶ 49–51, 79–82. This is because the ablating laser cannot pass through the cornea to reach the lens without destroying the cornea in the process. Id. ¶¶ 79, 82. In contrast, lasers used to cut internal tissues of the eye use laser photodisruption. Id. ¶ 80. Accordingly, we find that one of ordinary skill in the art would not have used Freedman’s system to perform surgery on the lens or lens capsule, as asserted by Petitioner.” slip op. at 76

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “exhibit provides no context or rationale for the award and, as discussed above, the Catalys product is composed of many components and systems not specifically covered by the challenged claims. Ex. 2043, 3. Patent Owner points also to a report dated June 28, 2012, as evidencing that this award was for the specific features of the Catalys product claimed, but this evidence lacks any identification of the author and the portion identifying features of the product appears to merely be listing features thereof rather identifying than any reason for the award. Ex. 2040. Additionally, the evidence of praise cited by Patent Owner is not specific to the subject matter of claim 1 (and its dependent claims) of the ’724 patent, but general praise for the FLACS system and laser-guided femtosecond laser procedures. See Ex. 2035; Ex. 2037; Ex. 2044; Ex. 2051. For these reasons, we are not persuaded by Patent Owner’s arguments or evidence on industry praise.” slip op. at 51

  Patent outcomesUS 8,500,724 mixed
  § 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,500,724
• Fujifilm Corporation v. Sony CorporationSome claims unpatentable
  PTAB · Nov 7, 2018 · IPR2017-01268 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 15 and 17 are unpatentable as anticipated by Ishikawa; the petitioner did not show claims 1–11, 16, and 18–20 unpatentable over Aonuma or Aonuma and Abe.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) at the time of the ’774 patent would have had “a bachelor’s degree in materials science, electrical engineering, mechanical engineering, chemistry, or a closely related field, and at least five years of experience” in industry or academic research relating to magnetic tape, or “a master’s degree or higher” in the same fields and at least three years of experience relating to magnetic tape. Pet. 13 (citing Ex. 1003 ¶ 65; Ex. 1018 ¶ 60). Patent Owner does not dispute Petitioner’s assessment in its Response, and Dr. Talke agrees that it “is reasonable.” Ex. 2026 ¶¶ 25–26. Petitioner’s assessment appears consistent with the level of ordinary skill in the art at the time of the invention as reflected in the prior art in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Accordingly, we adopt Petitioner’s assessment of the level of ordinary skill in the art.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “the broadest reasonable construction, claim terms are presumed to have their ordinary and customary meaning as understood by a person of ordinary skill in the art in the context of the entire patent disclosure. In re Translogic Tech., Inc., 504 F.3d 1249, 1257 (Fed. Cir. 2007). Only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For the purposes of the Decision on Institution, we determined that, based on the record at that time, no claim term required express construction (Dec. on Inst. 7), and we see no reason to modify that determination in light of the record developed during trial. C.” slip op. at 9

  • Expert testimonyPetitioner expert creditedMixed

    “considerably greater than Ishikawa’s stylus load of 50–300 μN (Ex. 1015 ¶ 45). The Talke Declaration does not address this discrepancy, and Dr. Talke stated during his deposition that reducing the stylus load would reduce scratching of the magnetic tape surface. Ex. 1030, 108:14–19 (“Q: Would reducing the contact pressure for the stylus instrument reduce the scratching of the magnetic tape surface by the stylus? A: Yes, it would, but you have to remember the other problem is the diameter and size of the stylus.”). Moreover, Petitioner provides evidence that it was not uncommon to use stylus-type profilometers to measure the properties of magnetic tape, even after Bhushan was published in 1996. See Reply 6. In particular, Petitioner points to Saliba,6 which describes using a stylus-type profilometer, under identical conditions to those used in Ishikawa, to measure the surface characteristics (including peak-to-valley roughness) of the backcoating of magnetic tape. Ex. 1027, 7:28–40, 57–60. Petitioner further points to Ohno,7 which also describes using “a stylus type 3D profilometer in accordance with JIS B0601” to measure the surface roughness characteristics of magnetic tape. Ex. 1028 ¶ 36; see also Ex. 1015 ¶ 45 (Ishikawa explaining that surface roughness characteristics were measured “in accordance with JIS-B0601-1994”); Ex. 1027, 7:28–39 (Saliba explaining that surface roughness characteristics where measured “in accordance with JIS-B0601-1994”). Accordingly, we are persuaded that the 6 US Patent No. 6,558,774 B1, issued May 6, 2003 (Ex. 1027). 7 U.S. Patent App. Pub. No. US 2005/0175866 A1, published Aug. 11, 2005 (Ex. 1028). evidence establishes that a stylus-type profilometer is a suitable device for measuring the surface characteristics of magnetic tape.” slip op. at 19

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We agree with Petitioner that Ishikawa teaches “peak-to-valley roughness less than about 325 nm” as recited in claim 15. Pet. 24–25; Reply 5–8; Ex. 1003 ¶ 216. In particular, Ishikawa teaches a backcoating layer of a magnetic tape that has a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm.” Ex. 1015 ¶ 44. Ishikawa provides five example embodiments of its magnetic tape, and reports the measurements of a number of characteristics of the backcoat layer for each example, including peak-to-valley roughness Rz. Id. ¶¶ 120–134, Table 1. Ishikawa discloses that peak-to-valley roughness Rz was measured using a stylus-type profilometer under the following conditions: Stylus: diameter: 1.5 to 2.5 μm; curvature: 60º Contact pressure: 50 to 300 μN Cut-off length: 80 μm Sampling length: 80 μm Assessment length: 400 μm Id. ¶¶ 45, 49. The reported peak-to-valley roughness Rz values for the five examples ranged from 58 to 87 nm, as shown in the annotated portion of Ishikawa Table 1 from the Petition, reproduced below: Pet. 24 (citing Ex. 1015, Table 1). The annotated portion of Ishikawa Table 1 shows the results for the measured characteristics of the backcoat layer of Examples 1–5, with the peak-to-valley roughness Rz values highlighted by a red box. Id. Because Ishikawa teaches that the backcoating layer of its magnetic tape should have a peak-to-valley roughness “Rz of 40 to 250 nm, particularly 50 to 200 nm,” and because Ishikawa presents examples of magnetic tape with backside surfaces having a peak-to-valley roughness of 87 nm or less, Ishikawa discloses “a peak-to-valley roughness less than about 325 nm” as recited in claim 15.” slip op. at 16

  Patent outcomesUS 7,029,774 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,029,774
• Dexcom, Inc. v. Waveform Technologies, Inc.Some claims unpatentable
  PTAB · Sep 12, 2018 · IPR2017-01051 · APJ Elizabeth M Roesel · IPR · Final written decision

  Claims 1, 4–12, and 15–19 were held unpatentable as obvious over Hagiwara; claims 2, 3, 13, and 14 were not shown unpatentable. The motion to amend was granted in part.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part

    “j. Conclusion Regarding Obviousness Based on Hagiwara (Proposed Substitute Claims) We conclude that Petitioner has shown by a preponderance of the evidence that proposed substitute claims 20, 22, 23, and 26–29 are unpatentable as obvious in view of Hagiwara. We conclude that Petitioner has not shown by a preponderance of the evidence that proposed substitute claims 21, 24 and 25 are unpatentable as obvious in view of Hagiwara. 2. Remaining Grounds of Unpatentability Asserted by Petitioner (Proposed Substitute Claims) In view of our determination that Petitioner has shown by a preponderance of the evidence that proposed substitute claims 20, 22, 23, and 26–29 are unpatentable as obvious in view of Hagiwara, we do not reach Petitioner’s remaining grounds of unpatentability as to these claims. Regarding proposed substitute claims 24 and 25, Petitioner’s contentions regarding the Handbook, Wilson, and Say do not remedy the deficiencies in Petitioner’s contentions regarding Hagiwara, as discussed above. Accordingly, we conclude that a preponderance of the evidence does not show that proposed substitute claims 24 and 25 are unpatentable as obvious based on Hagiwara in view of the Handbook, Wilson, or Say. H.” slip op. at 71

  • ExcludeOther

    “As discussed above, we do not reach the Wilson-Based Grounds with respect to claims 1, 4–12, and 15–19 of the ’574 patent. As for claims 2, 3, 13, and 14, we determine that Petitioner has not shown unpatentability based on the Wilson-Based Grounds, even if Exhibit 1037 and the corresponding portions of Petitioner’s Reply (Paper 37) are not excluded, because Petitioner does not offer Exhibit 1037 to cure the deficiency we noted in Wilson. See Section II.F, supra. For this reason, we dismiss as moot Patent Owner’s motion.” slip op. at 72

  • Expert testimonyPetitioner expert discountedPatent owner expert discountedDecided for patent owner

    “sensor would not have been a motivation to combine Hagiwara’s embodiments” because Hagiwara’s catheter prevents damage to the sensor during insertion and because a sensor with a side sensor window creates a greater risk of damage and vascular injury and reduces exposure to blood, as compared with a sensor with an end sensor window. PO Resp. 20–25. We have considered Patent Owner’s arguments, but, for the reasons discussed above, we are persuaded that Petitioner has established a motivation to combine, notwithstanding the conflicting expert testimony regarding the disadvantages of a side sensor window versus an end sensor window. Neither of the expert opinions on this topic is supported by objective facts or data. Ex. 1006 ¶ 155;13 Ex. 2008 ¶¶ 54–57, 87–95; Ex. 2009, 92:8–97:12. For this reason, we give little or no weight to either side’s expert testimony 13 Dr. Vachon cites “WO 01/13102, Vadgama” (Ex. 1006 ¶ 155), however, this reference was not submitted as an exhibit in this proceeding. on this topic. 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”); Rohm & Haas Co. v. Brotech Corp., 127 F.3d 1089, 1092 (Fed. Cir. 1997) (nothing in the Federal Rules of Evidence or Federal Circuit jurisprudence requires the fact finder to credit unsupported assertions of an expert witness). As discussed above, however, there is no disagreement that a side sensor window was a known alternative to an end sensor window. Ex. 1006 ¶¶ 73, 155; Tr. 43:22–44:3. That undisputed fact, together with Petitioner’s other evidence, is sufficient to establish a motivation to combine.” slip op. at 42

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Level of Ordinary Skill in the Art For purposes of our Institution Decision, we accepted the definition of a person of ordinary skill in the art (“POSITA”) provided by Petitioner’s declarant, Dr. Vachon. Dec. 11 (citing Ex. 1006 ¶ 28). That definition is: a person having a bachelor’s degree or the equivalent training or experience in mechanical engineering, bioengineering, or related field and at least three years of experience relating to biosensor research and development, or a master’s degree or the equivalent training or experience in mechanical engineering, bioengineering, or related field, and at least one year of experience relating to biosensor research and development. Id. Patent (https://www.uspto.gov/sites/default/files/documents/guidance_on_motions_ to_amend_11_2017.pdf); Bosch Automotive Service Solutions, LLC v. Matal, 878 F.3d 1027 (Fed. Cir. 2017); Bosch Automotive Service Solutions, LLC v. Iancu, Order on Petition for Panel Rehearing, No. 2015-1928 (Fed. Cir. Mar. 15, 2018). Owner’s declarant accepts and applies this definition of a POSITA for purposes of his opinions. Ex. 2008 ¶ 30. Neither party’s declarant indicates that any proffered opinion would change depending on the level of ordinary skill in the art. Therefore, consistent with our Institution Decision, we adopt Dr. Vachon’s definition of a POSITA. Ex. 1006 ¶ 28. We also rely on the cited prior art references as reflecting the level of ordinary skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 20

  Patent outcomesUS 7,529,574 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,529,574
• Old Republic General Insurance Group, Inc. / Old Republic Insurance Company et al. v. Intellectual Ventures II LLCSome claims unpatentable
  PTAB · Apr 12, 2017 · IPR2015-01992 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 1, 2, 4–12, 14–24, and 34–48 are unpatentable over the stated grounds; claims 3 and 13 were not shown unpatentable, and claims 25–33 and 49 were disclaimed.

  RulingsFinal written decision

  • Adverse judgmentAdverse judgmentOther

    “On February 8, 2017, Patent Owner informed the Board that it had “disclaimed claims 25–33 and 49” of the ’002 patent, thereby “rendering the institution of claims 25–33 and 49 in the subject inter partes review proceeding moot.” Paper 18, 1; Ex. 2005 (disclaimer of claims 25–33 and 49 pursuant to 37 C.F.R. § 1.321(a)).” slip op. at 2

  • BurdenMixed

    “2. Analysis To anticipate a claim a “prior art reference must disclose each and every feature of the claimed invention, either explicitly or inherently.” Eli Lilly & Co. v. Zenith Goldline Pharm., 471 F.3d 1369, 1375–76 (Fed. Cir. 2006). An inherent disclosure may be found when an asserted prior art reference “necessarily” includes the unstated limitation. Transclean Corp. v. Bridgewood Servs., Inc., 290 F.3d 1364, 1373 (Fed. Cir. 2002).” slip op. at 13

  • ExcludeMotion to exclude, deniedDenied

    “Upon review of Petitioner’s arguments and supporting evidence, we are persuaded that Petitioner has identified where each limitation of independent claim 1 is disclosed in Huang. Claims 11, 34, and 40 contain limitations similar to claim 1, Petitioner provides detailed arguments as to where each limitation of these claims is disclosed in Huang, and Patent Owner does not present any arguments for these claims separate from those 7 At oral argument, Patent Owner asserted that we should not consider Petitioner’s argument that the icons of Huang contain URL information because this argument was presented for the first time in Petitioner’s Reply. Tr. 32:19–35:5. Patent Owner did not file a motion to exclude this evidence, however, or request a sur-reply to address any allegedly new issues raised for the first time in Petitioner’s Reply. Id. at 34:18–23. Nor is it evident why Petitioner’s arguments are not appropriate rebuttal arguments addressing Patent Owner’s proposed construction of “pointer.” Accordingly, we decline to exclude Petitioner’s URL arguments and evidence.” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “be used in conjunction with the mobile interface agent, including “a computer, cable set top box, cellular phone, or other device.” Ex. 1001, 4:44–45. Patent Owner does not explain why the description of a “pointer” in one “context,” i.e., on a computer or PDA, represents a clear and deliberate attempt to define the term in all contexts, such that all pointers must be a “reference” to “a type of menu item” and be “accessible on a computer, PDA, or server.” See In re Paulsen, 30 F.3d at 1480 (noting that an inventor is “free to define the specific terms used to describe his or her invention,” but “this must be done with reasonable clarity, deliberateness, and precision”). The broadest definition of the term “pointer” in the ’002 patent is “a link/shortcut to an item.” Ex. 1001, 10:8–10 (“As discussed above, a pointer is a link/shortcut to an item such as . . . .”); Dec. on Inst. 10. This definition is consistent with the description of “pointers” in the ’002 patent written description and claims. Ex. 1001, 20:4–6 (“wherein the pointers provide links to access the corresponding user specific resources and information.”). Accordingly, we construe “pointer” to mean “a link or shortcut to an item.”” slip op. at 9

  Patent outcomesUS 6,546,002 mixed
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 6,546,002

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.