• Activision Blizzard, Inc. v. Milestone Entertainment, LLCSome claims unpatentable
  PTAB · Oct 13, 2026 · IPR2025-00710 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1–7, 9, 13, and 16–20 are unpatentable as obvious over Schneier and over Schneier with Okita; claim 8 was not shown unpatentable under either ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “On this record, Petitioner’s proposed level of ordinary skill in the art is not contradicted and is consistent with the technology and descriptions in the ’294 patent and the asserted prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner indicates that “[t]his Petition establishes that the prior art meets each of the claim limitations under any reasonable construction. Thus, no express construction is required.” Pet. 13 (citing Ex. 1003 ¶ 86). In its Response, Patent Owner indicates that no constructions are necessary “because under any reasonable construction of the claim terms, the prior art fails to disclose or suggest the claimed features.” PO Resp. 4–5. Because there is no dispute between the parties as to any particular claim term and because the claims, as a whole, are reasonably clear on their face, no specific claim construction is necessary in this proceeding.” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “rather than 10 credits, does not have a temporal component. Ex. 1008, 63:31–34. Rather, it describes an option for the user or player to obtain a discount at a particular point in time if the player is willing to purchase 20 rather than 10 credits. Id. Petitioner’s citations to this embodiment do not 9. Pet. 31; Pet. Reply 3–7 (citing Ex. 1008, 63:31–34). In this embodiment the $0.30 and $0.50 multipliers are constant, and the user is simply choosing between two existing options at a particular time to potentially take advantage of a $0.20 discount on credits. Comparatively, the $0.30 and $0.50 multipliers are different, but they are not “variable over time,” as required by claim 9. Ex. 1001, 47:38–40.” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “and reliance on Figure 19 do not in any way explain how updating game costs by meter 502 with a new Cost_Table is relevant to a credit multiplier or even a multiplier being varied over time. Ex. 1003 ¶ 155. Considering this evidence, we determine that Petitioner and Mr. Crevelt’s reliance mainly on snippets from Schneier’s “Updating Cost Information protocol” embodiment does not sufficiently explain why or how a person of ordinary skill in the art would have understood updating game cost to encompass varying a multiplier of credits over time. We also note that during his deposition, Mr. Crevelt was given opportunity to clarify his testimony as to Figure 19 and explain the cost updating embodiment in Schneier, and mostly demurred. See Ex. 2004:158:4–182:6. Explaining his reliance on Figure 19, Mr. Crevelt stated: A: And whatever latest price from that updated cost information coming from the central site is -- is variable, it’s variable as time proceed[s]. It’s a – it’s a, much of a complicated section, and -- but the information is in the Schneier patent and shows that it could have -- it should change over time. Id. at 158:23–159:5. Mr. Crevelt further stated that: A: . . . for a metered play where you’re buying so much time or so many credits or so many games on a specific game and when it runs out, then have you to buy more, and that variable can change over time. relates Schneier’s “updated cost,” with the claimed “multiplier” and “variable,” and does not adequately explain how they are equivalent or interconnected. See, e.g., id. at 160:16–23 (Mr. Crevelt testifying that “we can go from the description of figure 19, which starts at basically the top of column 56 in the Schneier patent, and . . . describes this process in detail of how the information is transferred from one place to the other and updated.”). Mr. Crevelt concludes that Schneier’s description is “complicated,” and from Figure 19 asserts the cost somehow includes a credit multiplier that “could” or “should” change over time. Id. at 158:23– 159:5. Overall, this testimony fails to sufficiently explain or point to persuasive evidence in Schneier as to how or why a person of ordinary skill in the art would have understood that the Figure 19 cost updating embodiment discloses a time-variable multiplier as required in claim 8.” slip op. at 20

  Patent outcomesUS 10,825,294 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,825,294
• Activision Blizzard, Inc. v. Milestone Entertainment, LLCSome claims unpatentable
  PTAB · Oct 13, 2026 · IPR2025-00709 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1, 2, 4, 6, 8, 10, 14–18, 21–23, 25, 27, and 29 are unpatentable as obvious over Schneier and over Schneier with Okita; claim 9 was not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner states it “does not dispute Petitioners’ proposed level of skill, and under any level of skill a POSITA would not understand the asserted Grounds to raise any unpatentability issue.” PO Resp. 4. Patent Owner states further that “this [Patent Owner Response] and supporting declarations apply Petitioner’s proposed level of skill.” Id. On this record, Petitioner’s proposed level of ordinary skill in the art is not contradicted and is consistent with the technology and descriptions in the ’635 patent and the asserted prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner indicated in the Petition that “[t]his Petition establishes that the prior art meets each of the claim limitations under any reasonable construction.[] Thus, no express construction is required.” Pet. 12–13 (citing Ex. 1003 ¶ 85). In its Response, Patent Owner indicates that no constructions are necessary “because under any reasonable construction of the claim terms, the prior art fails to disclose or suggest the claimed features.” PO Resp. 4–5. Because there is no dispute between the parties as to any particular claim term and because the claims, as a whole, are reasonably clear on their face, no specific claim construction is necessary in this proceeding.” slip op. at 8

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “We also note that during his deposition, Mr. Crevelt was given opportunity to clarify his testimony as to Figure 19 and explain the cost updating embodiment in Schneier, and mostly demurred. See Ex. 2004, 158:4–182:6. Explaining his reliance on Figure 19, Mr. Crevelt stated: A: And whatever latest price from that updated cost information coming from the central site is -- is variable, it’s variable as time proceed[s]. It’s a – it’s a, much of a complicated section, and -- but the information is in the Schneier patent and shows that it could have -- it should change over time. Id. at 158:23–159:5. Mr. Crevelt further stated that: A: . . . for a metered play where you’re buying so much time or so many credits or so many games on a specific game and when it runs out, then have you to buy more, and that variable can change over time. Id. at 161:2–6. These explanations are unpersuasive because the testimony relates Schneier’s “updated cost,” with the claimed “multiplier” and “variable,” and does not adequately explain how they are equivalent or interconnected. See, e.g., id. at 160:16–23 (Mr. Crevelt testifying that “we can go from the description of figure 19, which starts at basically the top of column 56 in the Schneier patent, and . . . describes this process in detail of how the information is transferred from one place to the other and updated.”). Mr. Crevelt concludes that Schneier’s description is “complicated,” and from Figure 19 asserts the cost somehow includes a credit multiplier that “could” or “should” change over time. Id. at 158:23– 159:5. Overall, this testimony fails to sufficiently explain or point to in the art would have understood that the Figure 19 cost updating embodiment discloses a time-variable multiplier as required in claim 9.” slip op. at 21

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Discount Credit Pricing Structure The $0.20 discount described by Schneier for purchasing 20 credits, rather than 10 credits, does not have a temporal component. Ex. 1008, 63:31–34. Rather, it describes an option for the user or player to obtain a discount at a particular point in time if the player is willing to purchase 20 rather than 10 credits. Id. Petitioner’s citations to this embodiment do not address the idea of a time component, i.e., “over time,” as required by claim 9. Pet. 31; Pet. Reply 3–7 (citing Ex. 1008, 63:31–34). In this embodiment the $0.30 and $0.50 multipliers are constant, and the user is simply choosing between two existing options at a particular time to potentially take advantage of a $0.20 discount on credits. Comparatively, the $0.30 and $0.50 multipliers are different, but they are not “variable over time,” as required by claim 9. Ex. 1001, 47:38–40.” slip op. at 18

  Patent outcomesUS 10,650,635 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,650,635
• Axon Enterprise, Inc. / Dedrone Holdings, Inc. v. Airspace Defense, Inc.Other
  PTAB · Oct 6, 2026 · IPR2025-00530 · APJ Scott C Moore · IPR · Final written decision

  Original claims 1–9 were canceled; the non-contingent motion to add substitute claims 10–18 was denied for lack of written-description support, and claim 18 was also indefinite.

  RulingsFinal written decision

  • 112 supportMotion to amend, deniedDenied

    “that either the ’303 application or the ’838 provisional contain adequate written description support for the disputed feature of limitation [10.d]. Though the disclosures cited by Patent Owner indicate that a secondary identifier can be used to aid in verification of a UAV, these disclosures also make clear that both first and second identifiers are transmitted by and received from the UAV. See, e.g., Ex. 2002, 4:15–17, 30:24–31:6; Ex. 2003 ¶¶ 14, 66. Patent Owner’s reliance on disclosure characterized as transmitting an identifier from a remote computing system “through the UAV” (Reply 2) is not persuasive. The cited disclosures from the ’303 application and ’838 provisional generally disclose that the identifiers transmitted by a UAV can be “generated remotely,” such as by a “remote computing system.” Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45. But Patent Owner has not identified disclosure indicating that a remote computing system may transmit an identifier to the identification receiver. In the ’303 application and ’838 provisional, only the UAV (which is part of the discrimination system, and thus not “remote”) actually transmits identifiers to the identification receiver. Patent Owner is correct in its assertion that an “aerial system identifier can be generated on-board the aerial system” or “generated remotely . . . at a remote computing system.” Mot. 7 (citing Ex. 2002, 14:23–15:2; Ex. 2003 ¶ 45). But even if a UAV’s identifier was at some time in the past generated by a remote computing system, the subsequent transmission of that identifier from the UAV to the identification receiver would not satisfy the plain language of limitation [10.d]. The claim language “receive … a second identifier from a computing system that is remote to the discrimination system” requires the receipt of a transmission of the second identifier from a remote computing system. This claim language limits the source of the received transmission (i.e., where the particular transmission is “receive[d] … from”). Thus, the relevant issue is from where was the recited second identifier received. The relevant is not where the second identifier was originally generated.” slip op. at 12

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “We determine that the disputed language in limitation [10.d] is not indefinite. There is no recitation in proposed substitute claim 10 that the second identifier is transmitted solely from the identifier transmission system. Thus, the alleged irreconcilable contradiction cited by Petitioner is not recited in the claims. Petitioner’s position appears to rest on the fact that the ’303 application and ’838 provisional do not disclose receiving the second identifier from a remote computing system. See Sur-reply 6 (“To manufacture written description support, [Patent Owner] argues the claim encompasses identifiers routed ‘through the UAV.’”). Though we agree that limitation [10.d] lacks adequate written description support, this defect does not render the claim indefinite because the scope of limitation [10.d] is otherwise reasonably certain based on its plain language. See supra § III.C.4.” slip op. at 18

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportReference not prior artPriority date, deniedDecided for patent owner

    “In contrast, the ’393 provisional never discloses that the described drone defense system may use the identity of a detected drone to develop a particular countermeasure. The disclosed RTSS certainly uses identity information to determine whether a drone is a threat. And if a threat is identified, the RTSS immediately starts “a series of processes … to determine what rule of engagement will be applied on the intruding drone.” Ex. 1006 ¶ 10. The ’393 provisional discloses that the system may select a particular countermeasure based on (i) the particular zone within a protected area within which a drone is located, (ii) “the behavior of the hostile drone,” or (iii) “other instructions.” Id. ¶¶ 9, 10. But the ’393 provisional never discloses that these “other instructions” may include the identity of the drone. The system disclosed in the ’393 provisional uses the identity of a drone to determine whether to activate the countermeasure system. See id. ¶¶ 16–18. But there is no disclosure in the ’393 provisional that the countermeasure system, once activated, uses the identity of the drone to develop the particular countermeasure to be employed. See generally Ex. 1006. Thus, though the Whitmarsh reference itself contains ample written description support for limitation [19e], the earlier-filed ’393 provisional does not. On this record, and having reviewed the ’393 provisional in its entirety, we determine that the ’393 provisional does not “reasonably convey[] to those skilled in the art that the inventor had possession of” the subject matter of limitation [19e] of Whitmarsh’s claim 19 “as of the filing date” of the ’393 provisional. See Ariad, 598 F.3d at 1351.” slip op. at 27

  § 102 anticipation§ 112 disclosurecites Nautilus
  Patents in suitUS 10,249,199
• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Apr 29, 2026 · IPR2024-01493 · APJ John D Hamann · IPR · Final written decision

  Claims 1, 3, 5, 7–11, 14, and 15 are unpatentable as obvious; claims 2, 4, 6, 12, and 13 were not shown unpatentable because the references did not establish entirely crystallized CoFeB layers.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In our Decision on Institution, we adopted the definition Petitioner proposes for one having ordinary skill in the art at the time of the invention of the ’167 patent. Dec. on Inst. 6. Namely, we found that one of ordinary skill in the art would have had “a Ph.D. in electrical engineering, physics, materials science, or a related field, and at least one year of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent,” or “a Master’s degree in electrical engineering, physics, materials science, or a related field, and four years of experience in the research, design, and/or development of magnetic/spintronic devices, or the equivalent.” Id. (citing Pet. 20 (citing Ex. 1024 ¶ 25)). We also found that “[l]ess work experience may be compensated by a higher level of relevant education, and vice versa.” Id. Patent Owner does not address Petitioner’s definition, nor provide its own. See generally PO Resp. Because Petitioner’s definition of the level of skill in the art is consistent with the ’167 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC, 57 F.3d at 1579; In re Oelrich, 579 F.2d 86, 91 (CCPA 1978).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “Here, neither party sets forth any term for claim construction. Pet. 17; see generally PO Resp. Thus, for purposes of this Decision, we afford the claim terms their plain and ordinary meaning. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’”)).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “In addition, we agree with Petitioner and find that one of ordinary skill in the art “would have been motivated to replace either or both of Bowen’s electrodes with CoFeB to increase TMR and lower Hf [(coupling field)] and Hc [(coercivity)].” Pet. 24, 27; Ex. 1055,30 2270 (“[I]t is natural to replace both the free and pinned layers to CoFeB to further increase the TMR value.”); Ex. 105631 ¶¶ 67–68 (“[B]oth the ferromagnetic layers 5, 7 are made of an FeCoB”32 for “improvement of the TMR ratio.”); Ex. 1024 ¶¶ 129, 132. We credit Dr. Bokor’s cited testimony as it is consistent with the cited evidence. Moreover, as Petitioner explains, “[r]esearchers were . . . interested in optimizing MTJs to improve MRAM performance,” and “[h]igher TMRs long promised improved performance for MRAM.” Pet. 6 30 Dexin Wang et al., 70% TMR at room temperature for SDT sandwich junctions with CoFeB as free and reference layers, 40 IEEE Trans. Magn. 2269–71 (July 2004). 31 US 2004/0136232 A1, published July 15, 2004, to Hosomi. 32 We find persuasive Dr. Bokor’s testimony that “a skilled artisan [would have] understood that CoFeB and FeCoB refer to the same alloy.” Ex. 1024 ¶ 121. 36–44) (emphasis omitted). In addition, we agree with Petitioner that one of ordinary skill in the art “would have found it obvious to use Parkin’s CoFeB layer in place of Bowen’s electrodes to increase TMR” in light of Parkin’s explicit teachings. Pet. 27; Ex. 1024 ¶ 133. In particular, Parkin explicitly teaches that “very high TMR values are unexpectedly found for MTJs with highly textured (100) MgO tunnel barriers but with nominally amorphous storage layers.” Ex. 1062, 18:49–51. Notably, Parkin provides that “[t]he TMR of the device of F[igure] 3A is nearly two times higher than the highest TMR ever reported in prior art devices using conventional alumina tunnel barriers.” Id. at 18:63–65; Pet. 27. And as we discuss above, Parkin teaches that Figure 3A’s MTJ may be inverted, such that the storage layer is formed beneath the tunnel barrier. Ex. 1062, 17:7–10. In addition, we agree that one of ordinary skill in the art would have had a reasonable expectation of success in modifying Bowen in the manner Petitioner proposes, as forming electrodes with CoFeB alloys was known. Pet. 28. As Petitioner argues, “forming electrodes with CoFeB alloys in MTJs was known and had been successfully done,” and thus we are persuaded that “one of skill would have found it to be a straightforward, predictable, and desirable improvement to TMR, Hf, and Hc in Bowen’s” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We find unavailing Patent Owner’s arguments that Bowen teaches a “radically different manufacturing process[] from the claimed invention,” and that Bowen “went to heroic lengths to provide a crystalline (001) bottom electrode that provides a template for epitaxially growing a crystalline MgO(001) layer.” PO Resp. 2 (emphasis omitted). Patent Owner describes in detail Bowen’s specific manufacturing process, including the specific structure of the MTJ manufactured, and argues the claimed invention differs. PO Resp. 30–33. These arguments are inapposite. Petitioner cites the specific teachings Petitioner relies on from Bowen, rather than adopting the entirety of Bowen’s process or MTJ. See, e.g., Pet. 21–36 (citing the portions of Bowen—that in combination with Parkin—teach claim 1). Petitioner is not “compelled to adopt every single aspect of [Bowen’s] teaching without the exercise of independent judgment.” Lear Siegler, Inc. v. Aeroquip Corp., 733 F.2d 881, 889 (Fed. Cir. 1984). We also find unavailing Patent Owner’s argument that Bowen and Parkin each teach away from Petitioner’s combination because Parkin used boron to avoid crystalline electrodes whereas Bowen tried to achieve perfect crystalline electrodes. PO Resp. 4. As we discuss above, one of ordinary skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB to increase TMR. And Patent Owner does not identify in either reference a specific teaching that criticizes, discredits, or otherwise 35 M. Jimbo et al., Thermal stability of spin valves using amorphous CoFeB, 165 J. Magnetism & Magnetic Materials 308–11 (1997) (“Jimbo”). combination. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004).” slip op. at 23

  Patent outcomesUS 10,680,167 mixed
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 10,680,167
• Western Digital Technologies, Inc. v. Godo Kaisha IP Bridge 1Some claims unpatentable
  PTAB · Mar 27, 2026 · IPR2024-01447 · APJ Sheila F Mcshane · IPR · Final written decision

  Claims 1–2 are unpatentable as obvious over each Bowen-based combination; claims 3–4 were not shown unpatentable, and the Nagahama-based grounds failed for all claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are 5 Nagahama, EP 1391942 A1, published February 25, 2004 (Ex. 1027, “Nagahama”). made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art is also reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Consistent with the Institution Decision (Dec. 7), we adopt the assessment offered by Petitioner as it is consistent with the ’134 patent and the asserted prior art. Patent Owner does not dispute that Dr. Bokor is qualified as a person of ordinary skill in the art in accordance with the assessment adopted. See Tr. 90:9–15. Patent Owner, however, questions Dr. Bokor’s knowledge on the formation of crystalline materials and seeks to exclude his related testimony. See PO Resp. 1–2, 27; PO Mot. Excl. 12–15. We address this issue infra Section V.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner “submits the claim terms should be given their plain and ordinary meaning and no claim construction is necessary to find the claims unpatentable.” Pet. 24. Patent Owner does not raise any claim construction issues in its Response. See generally PO Resp. We determine that we need not expressly construe any claim terms to resolve the parties’ disputes. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9

  • Strike new argumentNew argument consideredDenied

    “A reply may only respond to arguments raised” in the patent owner response. 37 C.F.R § 42.23(b). The Consolidated Trial Practice Guide states that responding “does not mean proceed[ing] in a new direction with a new approach,” and “[w]hile replies . . . can help crystalize issues for decision, a reply . . . that raises a new issue or belatedly presents evidence may not be considered,” that is, “Petitioner may not submit new evidence or argument in reply that it could have presented earlier, e.g. to make out a prima facie case of unpatentability.” Consolidated Trial Practice Guide § II.I (last updated Dec. 12, 2025) (“CTPG”), available at https://www.uspto.gov/patents/ptab/trial-practice-guide. We are not persuaded by Patent Owner’s assertions that Petitioner’s reply arguments on Parkin should not be considered. As discussed supra Section II.D.3.i above, the Petition includes the assertion that if Parkin’s CoFeB electrodes were used to modify Bowen, the MgO polycrystalline or single-crystal layer would still have the same 001 orientation. Pet. 33–34 (citing Ex. 1024 ¶ 129; Ex. 1062, 9:58–10:2, 18:49–51; Ex. 1005, 4:30–32). Petitioner’s support in the Petition references disclosures relating to Parkin’s Figure 3A (Ex. 1062, 18:49–51), which discloses a MgO(100) tunnel barrier, and the Petition also notes that the structure of Figure 3A may be inverted. Pet. 40 (citing Ex. 1062, 17:7–10). Patent Owner’s arguments, in large part, are related to Petitioner’s arguments in the Reply relating to Parkin’s Figure 11. Parkin’s Figure 11 is an embodiment where the structure of the devices of Figure 3A is inverted. See Ex. 1062, 22:29–33. We do not find that Petitioner’s arguments that are at issue in the Reply represent a new direction in its approach—the Petition is clearly based on the assertion that if Parkin’s CoFeB electrodes are used in Bowen, the device would have a MgO(001) tunnel barrier layer. Further, the Petition refers to Parkin’s disclosure that the device in Figure 3A may be inverted, which would be encompassed by the Figure 11 embodiment. Moreover, in the Institution Decision, we invited additional briefing on whether Parkin’s storage magnetic electrode was an amorphous ferromagnetic electrode, which relates to Parkin’s Figure 11 (Dec. 28–29). We are also not persuaded by Patent Owner’s argument that the Petition’s assertions do not correspond to what Petitioner argues in the Reply because they were referred to in the section pertaining to limitation 1[e]. The Petition includes a cross-reference in the limitation 1[d] discussion on the tunnel barrier layer limitation: “if Sunai’s or Parkin’s CoFeB electrodes are used as described in Claims 1[e] and 2 in this Ground, one of skill would understand that the MgO . . . would still have the same (001) orientation.” Pet. 33. Further, Petitioner’s arguments in its Reply properly respond to arguments made on contested issues. Patent Owner’s contentions on the merits in its Response are largely based upon the assertion that the modified MTJ of Bowen would not have a MgO(001) layer as claimed. See PO Resp. 4–10, 18–48. Petitioner’s reply arguments on Parkin relate to whether there would be a MgO(001) layer in its structure, so we find that Petitioner’s arguments on Parkin in its Reply (Pet. Reply 2–5) and the related evidence are appropriately responsive. slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We find that there is sufficient evidence in support of Petitioner’s assertion of the rationale to replace Bowen’s electrodes with CoFeB and anneal them. As discussed supra Section II.D.ii.2, Parkin’s Figure 11 depicts and describes a storage electrode that may be composed of amorphous CoFeB, with the formation of a MgO(001) barrier layer atop it. See Ex. 1062, 22:29–66. Patent Owner argues that Parkin’s benefits are because its CoFeB electrode is amorphous (PO Resp. 51–52), but this is not accurate. In Parkin, the CoFeB amorphous electrode crystallized at the interface layer between the barrier and the electrode. Id. at 19:6–19. Parkin discloses that higher TMRs were attributable to the crystallization of CoFeB. Id. at 18:63–19:22. Parkin also discloses that its completed CoFeB- MgOH(001)-CoFeB device was annealed with resulting high TMRs. Id. at 17:60–18:16. These disclosures provide support that one of skill in the art would have been motivated to replace Bowen’s electrodes with CoFeB and anneal to crystallize them because of the known improvements of TMR. Additionally, Parkin’s disclosures support that the results of the combination would have been predictable. That is, Parkin actually discloses an amorphous CoFeB electrode, formation of a MgO(001) tunnel barrier on the amorphous electrode, and annealing the assembly, with a resulting high TMR. Accordingly, Petitioner has provided reasoning with rationale underpinning for the motivation to combine. See KSR, 550 U.S. at 415 (“[t]he combination of familiar elements according to known methods is likely to be obvious when it does no more than yield predictable results”).” slip op. at 31

  Patent outcomesUS 8,405,134 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,405,134
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Power2b, Inc.All claims unpatentable
  PTAB · Mar 13, 2026 · IPR2021-01266 · APJ John D Hamann · IPR · Remand

  On remand, the Board held claims 29, 36–38, 44–46, 48, 49, and 56–58 unpatentable as obvious over Reime, with additional grounds also supporting the challenged claims.

  RulingsRemand decision

  • ExcludeMotion to exclude, deniedDenied

    “In addition, Patent Owner filed a Motion to Exclude certain of Petitioner’s evidence (Paper 32) and Petitioner filed an Opposition (Paper 33). We denied this motion. See Final Dec. 58–61.” slip op. at 3

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “transmission paths. See Pet. Reply 14–15; PO Sur-reply 15. And we agree with both parties that the light that is transmitted directly through the plate to the sensor element does not have intervening reflections—such is consistent with the plain and ordinary meaning of “directly to.” See PO Resp. 31–32; Pet. Reply 14–15; PO Sur-reply 15. Nothing in claim 48’s language, however, requires that all of the reflected light be transmitted directly to the sensor element, which Patent Owner argues. Ex. 1001, 70:32–35; PO Resp. 31–32; PO Sur-reply 14–16. Rather, we agree with Petitioner that the claim language “merely requires that some light reflected by the object goes ‘directly to’ at least one sensor element once it is transmitted through the viewing plane defining plate.” Pet. Reply 14. We also agree that “none of these dependent claims purport to be exclusive of one another.” Id. at 15. Rather, claims 46–48 simply require some light be transmitted (or propagated) for their particular transmission path, without reciting all light. See Ex. 1001, 70:24–35.” slip op. at 13

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “We find Petitioner’s arguments based on Reime alone insufficient. Thus, we find that Petitioner does not show by a preponderance of the evidence that claim 49 is rendered obvious by Reime alone.” slip op. at 52

  • Obviousness (§103) › KSR rationalesUnpatentableUnpatentable

    “And in view of the above, we find persuasive Dr. Bederson’s testimony that “[c]hoosing a multi-element detector or a single-element detector would have been a simple design choice using commercially available detectors.” Ex. 1002 ¶ 117. Accordingly, we find that one of ordinary skill in the art would have found it obvious for Reime’s receivers to be implemented using discrete single-element detectors. See KSR, 550 U.S. at 417 (“When there is a design need or market pressure to solve a problem and there are a finite number of identified, predictable solutions, a person of ordinary skill has good reason to pursue the known options within his or her technical grasp. If this leads to the anticipated success, it is likely the product not of innovation but of ordinary skill and common sense.”). We find unavailing Patent Owner’s argument that “Petitioner relies on expert testimony to gap-fill missing elements regarding Reime’s failure to disclose or suggest the different claim arrangements of detector elements in a ‘detector assembly.’” PO Resp. 78 (citing Ex. 1002 ¶¶ 111–119; Ex. 2056 ¶ 171). Rather, in light of Reime’s teachings, coupled with the general knowledge of one of ordinary skill in the art, it would have been obvious to employ discrete single-element detectors for Reime’s receivers. See Koninklijke Philips N.V. v. Google LLC, 948 F.3d 1330, 1338 (Fed. Cir. 2020) (finding obviousness can rely on supported expert testimony to supply an element of a claim). We appropriately consider such evidence of the knowledge that one of ordinary skill in the art would have had as part of our obviousness analysis. See Randall Mfg. v. Rea, 733 F.3d 1355, 1362–63 (Fed. Cir. 2013). Moreover, “AAPA can be important evidence of general background knowledge, and general knowledge can be used to supply a missing claim 1371, 1378–79 (Fed. Cir. 2025). Here, Petitioner relies on the cited AAPA as evidence of one of ordinary skill in the art’s general knowledge at the time of the ’093 patent, and the AAPA is not the basis for this ground. See Pet. 4, 42–43; Pet. Remand 4–5. As Shockwave Med. explains, Federal Circuit “case law has long recognized numerous permissible uses for general background knowledge in an IPR such as, ‘for example, furnishing a motivation to combine, or supplying a missing claim limitation.” 142 F.4th at 1378–79 (quoting Qualcomm Inc. v. Apple Inc., 24 F.4th 1367, 1376 (Fed. Cir. 2022) (citing Randall Mfg., 733 F.3d at 1362; Koninklijke, 948 F.3d at 1337–38)).” slip op. at 31

  Patent outcomesUS 9,569,093 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 9,569,093
• Luxottica Of America Inc. v. E-Vision Optics, LLCSome claims unpatentable
  PTAB · Dec 23, 2025 · IPR2024-01030 · APJ Richard H Marschall · IPR · Final written decision

  Claims 1–20, 22–31, and 33–37 are unpatentable; claims 21 and 32 were not shown unpatentable, principally because the proposed combinations failed to establish motivation to combine or the required airtight seal.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We find that the proposals from the parties substantially overlap, such that it remains unclear whether any substantive difference exists. Notably, neither party argues that the minor differences in the proposals lead to a different outcome on any issues in this proceeding. Based on our review of the proposals, we apply Patent Owner’s proposal because it is consistent with the problems and solutions disclosed in the ’483 patent and prior art of record. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record). The outcome of the issues addressed in this Decision would not change if we applied Petitioner’s proposal.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “hermetically sealed” module does not encompass waterproof modules that are not airtight. First, as Petitioner admits, as a general matter, “[s]omething that is hermetically sealed is sealed so as to be airtight.” Pet. 28 (citing Ex. 1002 ¶ 103; Ex. 1010, 269); PO Sur-reply 16. Petitioner later tries to argue that the specification puts a different spin on this meaning, but still acknowledges that “[o]utside the context of the ’483 patent, a hermetic seal is sometimes equated with an airtight seal.” See Pet. Post-hearing 2–3 (citing Ex. 1002 ¶ 103; Ex. 1010, 269). Based on our review of the record, the “ordinary meaning” of “hermetically sealed” means “airtight,” and, as noted above, “airtight” is not the same thing as “waterproof.” Second, the claims support Patent Owner’s position by including dependent claims that separately claim a “hermetically sealed” module (claims 13 and 32) and a “waterproof” module (claims 15 and 34), strongly suggesting that the terms have a different scope to avoid rendering some claims redundant. See Ex. 1001, 11: 65–66, 12:3–4, 12:52–53, 12:55–56. Petitioner argues in its Post-hearing brief that claims requiring waterproof modules are “a narrower species” of hermetic seal, but fails to explain how hermetic, airtight, and waterproof seals would not fall within the scope of both claims using its approach. Pet. Post-hearing Reply 2. Petitioner’s earlier argument in its Reply also seems to cut against this position by asserting that the specification “treats hermitically sealing as conventional and equivalent to waterproofing,” with different dependent claims directed to two allegedly “equivalent” terms making little sense. Pet. Reply 14 (emphasis added). The most natural reading of the claim language suggests that “hermetically sealed” means airtight, and does not encompass modules that are waterproof but not airtight. Third, while the specification does not define “hermetically sealed” and uses “waterproof” and “hermetically sealed” in similar contexts, it does not suggest that “hermetically sealed” does not require an airtight seal consistent with its ordinary meaning. See Pet. Reply 14–15 (citing Ex. 1001, 6:47–53, 9:15–18, 10:47–50). Instead, the specification states that hermetic seals prevent water from contacting electronics, which remains consistent with Patent Owner’s position because airtight hermetic seals are also waterproof. See Ex. 1001, 6:47–53, 9:15–18. The specification also states that “[t]he module preferably houses any of the aforementioned electrical components in a substantially water-proof and wear resistant/moisture resistant environment and is preferably hermetically sealed.” Id. at 10:47–50 (emphasis added). This passage supports Patent Owner’s position by suggesting that the preferable “hermetically sealed” module goes beyond mere water resistance. See PO Sur-reply 16–17. slip op. at 16

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “2. Petitioner’s Anticipation Arguments and Evidence Petitioner argues that Howell-596 discloses every limitation of claims 1, 9, 10, 14, 15, and 18, and points to specific portions of Howell-596 and expert testimony to support its arguments. See Pet. 10–20 (citing Ex. 1002; Ex. 1003). We have reviewed the evidence and arguments of record and find that Petitioner has shown, by a preponderance of the evidence, that the limitations in claims 1, 9, 10, 14, 15, and 18 are disclosed by Howell-596 for the reasons set forth in the Petition, which we adopt as our own. See id.11 Accordingly, we find that Petitioner has established, by a preponderance of the evidence, that Howell-596 anticipates claims 1, 9, 10, 14, 15, and 18.” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “Based on these undisputed points and the parties’ arguments, we agree with Patent Owner that Petitioner fails to establish that a POSITA would have been motivated to locate Howell-596’s module housing 1700, which contains its UV detection system 1500, behind a user’s ear. Petitioner never squarely addresses the fact that placing Howell-596’s UV detection system behind a user’s ear would negatively impact its performance. Pet. 31–33; Pet. Reply 17–22. As a result, even if we accept Petitioner’s arguments and evidence as to the various advantages when placing electronics behind a user’s ear, it fails to establish a motivation to combine that requires placing Howell-596’s module housing 1700, and therefore its UV detection system, behind a user’s ear. Petitioner never acknowledges the readily apparent disadvantages of placing a UV detection system behind the ear, where it may not work at all. See Pet. 31–33. Nor does Petitioner argue that, in its combination, adjustments would be made to ensure accurate operation of Howell-596’s UV detection system. See id. Similarly, Petitioner notes that both Howell-596 and Howell-833 disclose UV sensors behind the ear of a user, but those teachings do not establish that placing Howell-596’s module behind the ear would ensure proper operation of its UV detection system housed within that module. See Pet. Reply 17–22. Instead, even though Howell-596 discloses a sensor behind the ear of a user, it maintains the UV detection system in a module toward the front of the temple, away from the ear. See id. at 18–19; PO Surreply 21–22; Ex. 1003 ¶ 205 (describing UV detection system 2102), Fig. 21 (showing UV detection system 2102 toward the front of the temple). Moreover, Petitioner’s reliance on the sensor placed behind the ear of the user in Howell-596 lacks weight because that sensor merely indicates that the device “is being worn by a user,” which serves a very different purpose than Howell-596’s UV detection system, which seeks to monitor a user’s exposure to UV radiation, a central purpose of Howell-596’s eyewear. See Ex. 1003 ¶ 205, code (57). Howell-833 also employs a UV sensor behind the ear, but Petitioner does not establish that it operates any differently than the “being worn” sensor in Howell-596, and therefore does not establish that Howell-596’s UV detection system would still work for its intended purposes in Petitioner’s proposed combination. See Pet. Reply 19–20.” slip op. at 29

  Patent outcomesUS 8,708,483 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 8,708,483
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.