• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Apple Inc. v. Proxense, LLCAll claims unpatentable
  PTAB · Sep 17, 2026 · IPR2025-00562 · APJ Thu A Dang · IPR · Final written decision

  Claims 1–20 are unpatentable as obvious over Giobbi ’157, Giobbi ’139, and Dua; the Board also finds the claims unpatentable under the Broadcom grounds.

  RulingsFinal written decision

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) does not applyDecided for petitioner

    “IPR2024-00783, Ex. 1001, 22:36–49. As the Federal Circuit stated, when a disputed claim limitation does not employ “means for” language, the presumption is that each of the terms conveys sufficiently definite structure or act and, thus, is not subject to § 112 ¶ 6. See Dyfan, 28 F.4th at 1367. Based on the record before us, this presumption that each of the terms is not subject to § 112 ¶ 6 is not overcome.” slip op. at 17

  • Skill levelOther

    “differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, “would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of non-obviousness. See Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 17–18 (1966).” slip op. at 25

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We find persuasive Dr. Wolfe’s supporting testimony that a POSITA would have understood the terms “PDK” and “RDC” to have “definite structure.” Ex. 1013 ¶¶ 35–56. In particular, we find persuasive Dr. Wolfe’s testimony that the term “PDK,” for example, “encompasses at least ‘a collection of circuit components that includes an antenna, a transceiver, and a controller and memory for storing information particular to a user.’” Id. ¶ 35. Dr. Wolfe’s testimony is consistent with the Specification of the ’188 patent. See Ex. 1001, 5:42–6:7, 3:48–62. In particular, the Specification of the ’188 patent describes a microchip that stores information in memory and responds through an antenna when probed, which is consistent with Dr. Wolfe’s testimony. Id.; Ex. 1001, 1:30–62.” slip op. at 19

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “differences between the claimed subject matter and the prior art are such that the subject matter, as a whole, “would have been obvious at the time the invention was made to a person having ordinary skill in the art to which said subject matter pertains.” KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 406 (2007). The question of obviousness is resolved on the basis of underlying factual determinations including: (1) the scope and content of the prior art; (2) any differences between the claimed subject matter and the prior art; (3) the level of ordinary skill in the art; and (4) objective evidence of non-obviousness. See Graham v. John Deere Co. of Kansas City, 383 U.S. 1, 17–18 (1966).” slip op. at 25

  Patent outcomesUS 9,049,188 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,049,188
• Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentable
  PTAB · Sep 3, 2026 · IPR2025-00673 · APJ Michael R Zecher · IPR · Final written decision

  Claims 1–7 are unpatentable as obvious over the combined teachings of the asserted references, including Shin and Aoyama and Shimomura and Iwase.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsOther

    “1 SoundClear also filed a Contingent Motion to Amend that proposed to replace originally challenged claim 5 of the ’675 patent with proposed substitute claim 8. Paper 21. We, however, granted SoundClear’s request to withdraw its Contingent Motion to Amend and, as a result, the Contingent Motion to Amend will no longer be considered in this proceeding. Paper 30.” slip op. at 2

  • Skill levelOther

    “2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 21

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMotivation not foundMixed

    “combination because (1) configuring Shin’s processor 120 accordingly “would have been trivial, involving straightforward changes to enhance the processor’s approach to simplifying and abbreviating its output”; and (2) this approach was well-known as evidenced by Ha’s disclosure of replacing “team meeting” and “date” with “schedules” based on the user’s environment.6 Id. at 27–28 (first quoting Ex. 1011 ¶ 97, then quoting Ex. 1011 ¶ 98) (citing Ex. 1002 ¶ 102; Ex. 1011, Fig. 7).” slip op. at 33

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “4. Dr. Stern’s Testimony is Reliable In its Patent Owner Response, SoundClear contends that “Dr. Stern’s” slip op. at 125

  Patent outcomesUS 11,244,675 unpatentable
  § 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,244,675
• Yealink (USA) Network Technology Co. Ltd. / Yealink Network Technology Co., Ltd. v. Barco N.V.All claims unpatentable
  PTAB · Jul 28, 2026 · IPR2025-00491 · APJ Frederick C Laney · IPR · Final written decision

  Claims 1–18 are unpatentable as obvious over Beel and Dinka, with or without Christison; the Kaplan, Van de Laar, and Christison ground fails for lack of motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Pet. 9–10 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art.” PO Resp. 6. On the complete record, we adopt Petitioner’s proposed definition of a person of ordinary skill in the pertinent art, as it is consistent with the ’972 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededPlain and ordinary meaningDecided for patent owner

    “Rather than addressing Petitioner’s proposals, Patent Owner states “the claims of the ’972 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Our decision in this matter does not turn on resolving any particular differences between the parties’ constructions. Therefore, because only those terms in controversy need to be construed, and only to the extent necessary to resolve the controversy, we determine that no claim term requires express construction in this proceeding and that the ordinary and customary meaning of the claim terms apply. See Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019).” slip op. at 11

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “device. The ’972 patent expressly defines endpoints broadly “as data sources or sinks.” Ex. 1001, 7:64–67. And the ’972 patent admits that Beel’s Figure 11 discloses the same endpoints depicted in the ’972 patent’s own Figure 4. Id. at 4:28–33, 16:44–67. Beel’s Figure 11 and accompanying description disclose a “[m]ass storage device 12,” a “USB audio device 14,” and a “USB HID device 13” on the peripheral device. Ex. 1005, Fig. 11, ¶¶ 320–323. Patent Owner’s own declarant conceded that a mass storage device is “a type of endpoint” (Ex. 1034, 43:19–21), and that “audio devices are endpoints” (id. at 57:5–61:4). We give reduced weight to Patent Owner’s contrary position to the extent it rests on the premise that a reference cannot disclose an endpoint unless it uses the word “endpoint” (Ex. 2030 ¶ 94; Ex. 1034, 43:19–44:16, 72:18–73:12); a premise that is inconsistent with the ’972 patent’s own broad definition and with the ’972 patent’s admission regarding Beel’s Figure 11. As additional support not separately emphasized by the parties in this connection, we note Dr. Almeroth’s technical explanation that, for data to pass from a functional device to a peripheral device, “both the functional device and the peripheral device must have ‘endpoints’”—a data source and a data sink—reasoning consistent with the ’972 patent’s definition. Ex. 1002 ¶ 125.” slip op. at 27

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “First, we agree with Patent Owner that, under the ordinary meaning of the claim language, the endpoint is an endpoint of the peripheral device, and that it must be “a data source or a data sink which is able to store or emit data, of the functional device exposed or made available on the first peripheral device.” Ex. 1001, 23:11–17. The limitation thus identifies a structure—an endpoint, residing on the peripheral device, that is a source or sink and that corresponds to (is “of”) the functional device—through which the communication recited in subsequent element (g) is carried out. By its terms, it imposes no requirement as to the direction in which data flows; it requires only that the endpoint be a data “source” or a data “sink” that is able to “store or emit” data. The operative transmit-and-receive communication “from the functional device to the processing device via the . . . endpoint” is recited in subsequent element (g), which we take up separately below. The disputed question under this limitation is therefore the structural one: whether Beel discloses, on the peripheral device, an endpoint that is “of the functional device.” Because the inquiry is structural and non-directional, we are not persuaded that the audio-out orientation of Beel’s described embodiment, on which Patent Owner relies, is dispositive of this limitation. device. The ’972 patent expressly defines endpoints broadly “as data sources or sinks.” Ex. 1001, 7:64–67. And the ’972 patent admits that Beel’s Figure 11 discloses the same endpoints depicted in the ’972 patent’s own Figure 4. Id. at 4:28–33, 16:44–67. Beel’s Figure 11 and accompanying description disclose a “[m]ass storage device 12,” a “USB audio device 14,” and a “USB HID device 13” on the peripheral device. Ex. 1005, Fig. 11, ¶¶ 320–323. Patent Owner’s own declarant conceded that a mass storage device is “a type of endpoint” (Ex. 1034, 43:19–21), and that “audio devices are endpoints” (id. at 57:5–61:4). We give reduced weight to Patent Owner’s contrary position to the extent it rests on the premise that a reference cannot disclose an endpoint unless it uses the word “endpoint” (Ex. 2030 ¶ 94; Ex. 1034, 43:19–44:16, 72:18–73:12); a premise that is inconsistent with the ’972 patent’s own broad definition and with the ’972 patent’s admission regarding Beel’s Figure 11. As additional support not separately emphasized by the parties in this connection, we note Dr. Almeroth’s technical explanation that, for data to pass from a functional device to a peripheral device, “both the functional device and the peripheral device must have ‘endpoints’”—a data source and a data sink—reasoning consistent with the ’972 patent’s definition. Ex. 1002 ¶ 125. Third, we find that the endpoint Beel discloses is a data source or a data sink that is “able to store or emit data, of the functional device.” We begin with the words of the limitation. The endpoint need only be “able to store or emit data”—language of capability, not a requirement that particular data actually traverse the endpoint in operation, and still less in a particular direction. And the endpoint is defined by the character of the data it handles: it is “a data source or a data sink,” which the ’972 patent instructs An audio endpoint, so understood, is characterized as an audio source or sink; its structure is not tied to any single instance of an audio device. On that understanding, Beel’s disclosure establishes the required capability directly. Beel discloses that “audio data is captured through a virtual sound card interface added as a logical device over the physical interface provided in the peripheral device,” Ex. 1005 ¶ 43, that the peripheral device “acts as a composite device comprising for instance a (virtual) audio speaker device,” id. ¶ 317, and that “audio data is captured at this interface . . . internally in the peripheral device 32” and streamed over the communications network, id. ¶ 319. Beel thus shows the endpoint on the peripheral device actually storing and emitting audio—and, correspondingly, video—data, which is the very type of data produced and consumed by the audio/visual functional devices connected to the base unit, including the microphones, cameras, speakers, and displays. Id. ¶ 120. An endpoint shown to store or emit audio and video data is necessarily one that is “able to store or emit” such data; the capability the limitation requires is thus established by Beel’s disclosure.” slip op. at 26

  Patent outcomesUS 10,684,972 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,684,972
• Amazon.Com, Inc. / Amazon.Com Services LLC et al. v. Soundclear Technologies LLCAll claims unpatentable
  PTAB · Jul 27, 2026 · IPR2025-00565 · APJ Michael R Zecher · IPR · Final written decision

  Claims 1–5 are unpatentable because Amazon showed they are anticipated by Shin; the Board did not reach Amazon’s contingent obviousness ground over Shin.

  RulingsFinal written decision

  • BurdenOther

    “Written Decision under 35 U.S.C. § 318(a) as to the patentability of claims 1–5 of the ’337 patent. For the reasons we identify below, we hold that Amazon has demonstrated by a preponderance of the evidence that these claims are unpatentable.” slip op. at 2

  • Skill levelOther

    “2. Level of Skill in the Art In determining whether an invention would have been obvious, we” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “1. Principles of Law To establish anticipation, “all of the elements and limitations of the” slip op. at 17

  Patent outcomesUS 11,069,337 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,069,337
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision

  Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner

    “1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21

  Patent outcomesUS 11,326,227 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,326,227
• Posco Co., Ltd. v. ArcelormittalAll claims unpatentable
  PTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision

  Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25

  Patent outcomesUS 10,961,602 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,961,602
• Tableau Software, LLC v. Icharts LLCAll claims unpatentable
  PTAB · May 7, 2026 · IPR2024-01387 · APJ Iftikhar Ahmed · IPR · Final written decision

  Claims 1–16 are unpatentable under the instituted obviousness grounds, including Becerra, the QlikView Manuals, and combinations with other references.

  RulingsFinal written decision

  • ExcludeMotion to exclude, grantedMotion to exclude, deniedGranted in part

    “why it is trustworthy and how it archives dates by which the webpages were accessible, as this is an information resource on which librarians reasonably rely. See FED. R. EVID. 703. We agree with Petitioner that Dr. Hall-Ellis does have personal knowledge of the facts stated in the remaining testimony (e.g., what she actually downloaded from websites), and that FEDERAL RULE OF EVIDENCE 602 is inapplicable to her testimony offered as an expert. See Pet. Opp. 5–6 (citing Ex. 1030 ¶¶ 26, 29–32, 35, 37–39). We find her testimony to be relevant to the issues presented and specifically to whether the QlikView documents were publicly accessible. We also find no danger that the testimony would confuse the issues or mislead the Board or present unfair prejudice to Patent Owner. Accordingly, we deny Patent Owner’s Motion as to the remaining portion of Dr. Hall-Ellis’s declaration.” slip op. at 92

  • Strike new argumentNew argument disregardedGranted

    “FURTHER ORDERED that Petitioner’s Motion to Strike portions of Patent Owner’s Reply on its Motion to Exclude (Paper 32) is granted; and” slip op. at 102

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “1. Motivation to Combine Becerra and Couckuyt Petitioner argues that a person of ordinary skill in the art would have been motivated to combine the teachings of Becerra and Couckuyt because such a person would have recognized that Couckuyt discloses useful techniques of assigning data to Becerra’s charts, including assigning data to each axis. Pet. 34 (citing Ex. 1005 ¶¶ 19, 52, Fig. 5; Ex. 1003 ¶ 224). Petitioner contends that Couckuyt discloses associating data from a “spreadsheet document” with a chart, such as a “bar graph.” Id. at 35 (citing Ex. 1006, 6:1–37; Figs. 3a, 3c). below. Petitioner’s annotations to Figure 4 identify “Drop Zones” in red and “Data Fields” in Blue. Id. at 36. Petitioner contends Couckuyt discloses a “drag-and-drop user interface (DDUI) . . . associated with a data source, such as the two-dimensional data source 300,” and Figure 4 illustrates the DDUI permitting “value data fields and the characteristic data fields . . . to be dragged and dropped into drop zones.” Id. at 35–36 (citing Ex. 1006, 7:10–13). Petitioner contends that a “primary benefit of the charting DDUI is that the user can quickly change the data that is being presented in the chart,” and using Couckuyt’s techniques, a user can “quickly change the data” and see the desired effects. Id. at 36 (citing Ex. 1006, 1:18–19; Ex. 1003 ¶ 228). Petitioner contends that when Becerra’s control panel includes multiple charts, Couckuyt’s techniques would allow dragging-anddropping data from a data source to multiple charts, and would simplify the process of assigning data to multiple control panel components. Id. at 36–37 skill in the art would have also had a reasonable expectation of success combining Becerra with Couckuyt because the combination would amount to nothing more than incorporating Couckuyt’s well-known drag-and-drop techniques into Becerra’s system. Id. at 37 (citing Ex. 1003 ¶¶ 229–231). Patent Owner responds that Couckuyt focuses on selecting a data icon that corresponds to dragging and dropping data fields, not dragging and dropping data, while Becerra teaches that selecting various data ranges from the spreadsheet is desirable. PO Resp. 36–37 (citing Ex. 1004 7:48–52; Ex. 2001 ¶ 146). According to Patent Owner, a person of ordinary skill in the art would not have been motivated to merely select data fields that do not limit the selected data in any way. Id. Patent Owner further argues Becerra’s method of binding components to a spreadsheet range and extracting formulas from a spreadsheet teaches away from the multiple chart generation scheme of Couckuyt that uses drag and dropping of data fields. Id. at 37. According to Patent Owner, Couckuyt is directed to the need for a charting DDUI that can generate multiple charts at the same time and such a need does not exist in Becerra which in turn is focused on creating a control panel that is an interactive graphics simulation. Id. (citing Ex. 1004, 1:66–67, 2:5–8; Ex. 1005 ¶ 11; Ex. 2001 ¶ 148). Based on our review of the complete record, we determine that” slip op. at 31

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “2. Whether QlikView Manuals Qualify as Prior Art Petitioner argues that “the QlikView Manuals describe a well-known system and are printed publications available to the public at least by July 8, 2008.” Pet. 7–9. Petitioner offers ample evidence to demonstrate the QlikView Manuals were publicly accessible by July 8, 2008. See id. (citing Ex. 1008; Ex. 1009; Ex. 1014–1023; Ex. 1003 ¶ 129–140; Ex. 1030;11 Ex. 1068 ¶¶ 4–7; Ex. 1032; Ex. 1033). Petitioner contends in 2008, QlikView was a well-known software product sold by QlikTech International AB (“QlikTech”). Id. at 8 (citing Ex. 1003 ¶ 129; Ex. 1030 ¶ 23; Ex. 1068 ¶¶ 4–7). Petitioner asserts that QlikTech announced that QlikView version 8.50 was scheduled for release on June 30, 2008, and QlikTech’s website added the “QlikView 8.50” hyperlink by July 8, 2008. Id. (citing Ex. 1003 ¶¶ 129–131; Ex. 1022, 1; Ex. 1068 ¶ 7). Petitioner contends that, as of July 8, 2008, a person of ordinary skill in the art would have understood that they could view the QlikView Manuals in the installation package. Id. (citing Exs. 1014–1017; Ex. 1003 ¶¶ 131–132; Ex. 1068 ¶ 7). Petitioner further contends that the QlikView Manuals were also available on QlikTech’s website as of this 11 As discussed below (see infra § IV.A), we grant Patent Owner’s Motion to Exclude as to certain portions of Exhibit 1030 and do not give them any weight. However, we deny Patent Owner’s Motion as to the remaining portions of Dr. Hall-Ellis’s testimony as well as Ms. Lofton’s testimony and various other exhibits proffered by Petitioner to show public accessibility of the QlikView manuals as of July 8, 2008. QlikView 8.50 was published on July 8, 2008. Id. at 8–9 (citing Exs. 1008, 1009, 1017, 1059, 1060; Ex. 1030 ¶¶ 29, 37). In its Patent Owner Response, Patent Owner does not contest that the QlikView Manuals were published and publicly available by July 8, 2008. PO Resp. 50 n.2 (noting only that Patent Owner intends to move to exclude evidence Petitioner relies on to establish the publication date for QlikView Manuals); Tr. 45:3–19. We are persuaded that Petitioner has shown by a preponderance of the evidence that the QlikView Manuals were publicly available as of July 8, 2008.12” slip op. at 50

  Patent outcomesUS 8,271,892 unpatentable
  § 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,271,892
• Yealink (USA) Network Technology Co. Ltd. / Yealink Network Technology Co., Ltd. v. Barco N.V.All claims unpatentable
  PTAB · Apr 7, 2026 · IPR2024-01439 · APJ Frederick C Laney · IPR · Final written decision

  Claims 1–11 and 13–21 are unpatentable under § 103 based on Ono and Corbett and Uchida and Grimshaw; the Board did not find Ichieda unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends that a person having ordinary skill in the art would have had at least a Master’s Degree in Electrical Engineering with . . . five years of work experience in computer science and embedded systems, or Master’s Degree in Computer Science with . . . five years of work experience in electrical and computer engineering and embedded systems. Additional educational experience could substitute for some of the work experience. level of skill in the art.” PO Resp. 10. We adopt Petitioner’s proposed definition of a person of ordinary skill in the pertinent art, as it is consistent with the ’951 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “determine that none of the claim terms the parties provide constructions for require an express construction in this proceeding. See Realtime Data LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019). The parties do appear to disagree on the meaning of “trigger,” however. Although neither party actually identifies that term as needing interpretation and neither party actually provides a claim construction analysis to support its respective position, the parties do dispute whether the evidence presented shows a “trigger,” both presumably giving that term its plain and customary meaning. In other words, while both parties appear to agree “trigger” carries its plain meaning, in application, the parties’ dispute regarding the particular limitations including that term appears to turn, not over what the evidence discloses, but only on whether the disclosure satisfies the plain meaning of “trigger” (see infra § II.E.2). Accordingly, while we apply the plain meaning of “trigger” in this proceeding, and in doing so, we address which party has properly applied the plain meaning and, in doing that, we address the scope properly afforded to “trigger.” That analysis, however, is done below in the context of the limitation in which this issue arises (see id.).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “has now been developed, and in view of both parties’ arguments, we find Petitioner has persuasively shown that modifying Ono’s peripheral device (i.e., communications module 44) to include an input device/physical actuator like the one described for Ono’s remote controller 69 to control the display of image data from a particular user’s computer would have been obvious to a skilled artisan at the time of the invention. More specifically, Petitioner has shown persuasively Ono shows that the use of an input device/physical actuator to send a signal that causes a participant’s computer to transmit and control the image data presented on a shared display in an image display system was a known technique (see Ex. 1005 ¶¶ 7, 44–48, 66– 71, 77–78, 80–89, 144, Figs. 3, 6, 8, 9; Ex. 1002 ¶¶ 85–100, 121–127) and available location for such an input device/physical actuator to initiate the transmission of data (see Ex. 1007 ¶¶ 6, 18, 20, 22–23, 26, 28, 46, Fig. 1; Ex. 1002 ¶¶ 92–100). Petitioner has also persuasively shown that a skilled artisan recognized benefits to giving a participant the ability to locally control the display of their computer’s image data. See Ex. 1002 ¶¶ 87–91; Ex. 1008 ¶¶ 4, 19–20, 27–28; Ex. 1009 ¶¶ 10–13, 39–10, 70–72. When Ono and Corbett are considered together as a whole from the perspective of a skilled artisan, therefore, it is clear that applying a similar input device/physical actuator to Ono’s peripheral device would have been recognized to result in the benefit of providing a participant with the same ability to send a signal that causes a participant’s computer to transmit and control the image data presented on a shared display from their computer within an image display system. As a result, a motivation has been established because the combination is an application of a known technique to derive a known benefit using prior art elements according to their established functions. Intel Corp. v. PACT XPP Schweiz AG, 61 F.4th 1373, 1380 (Fed. Cir. 2023).” slip op. at 24

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “that, from their perspective, the plain meaning of the term “trigger” does not exclude intervening steps between a user’s action on an input device and the ultimate transfer of the user selected arbitrary media content. Pet. Reply 11– 12 (indicating that “trigger” encompasses “a process that begins with and thus is triggered by a user pressing a button followed by an ‘image transfer’ from a PC to a projector”). For its part, Patent Owner maintains (at least implicitly) that intervening steps are excluded from the plain meaning. Neither party addresses with more specificity why, or why not, the scope of “trigger” supports their positions, however. Having now the complete record before us, we find that out preliminary assessment was wrong because the plain meaning of the term “trigger” does not exclude intervening steps between the cause-and-effect relationship of the trigger and the result it is intended to cause. Take, for example, a simple gun. Pulling the “trigger” to fire a gun necessarily includes intervening steps to occur: the trigger releases a hammer that, in turn, contacts a blasting cap within a bullet casing, which is what actually causes the gunpowder to ignite (i.e., fire) and expel the bullet. And there is no evidence in this record to suggest that this customary understanding of the word “trigger” is any different in the electrical arts, other than the trigger and result are generally electrical in nature, rather than mechanical. We find no clear disavowal of claim scope within the intrinsic record of the ’951 patent to indicate that the term “trigger” was intended to be understood any differently to exclude any intervening steps between a user’s action on an input device and the resulting transfer of user selected arbitrary media content. intervening steps would exist because the input device does not actually do the transferring of the media content; instead, the claims recite the transferring is “from the transmitter to the wireless communications network and [then] to the base node.” See Ex. 1001, 11:3–48, 27:62–28:1 (claim 1), 28:62–67 (claim 9), 29:42–46 (claim 16), 30:36–44 (claim 21) (emphasis added). A skilled artisan would have recognized that there would be intervening steps between the input device being acted upon and the content being displayed by base node’s display. See Ex. 1083 ¶¶ 11–12. In the claims, the input device is analogous to a gun’s trigger, the user carrying out a user action on the input device is analogous to pulling a gun’s trigger, and the transfer of user selected arbitrary media content is analogous the gun expelling a bullet. In both cases, there can be, and usually are, intervening steps, moreover, in both cases, inadvertent things can happen that may prevent the intended result (e.g., in the case of a gun, the hammer can jam; in the case of an input device, a connection can be rejected). Nevertheless, in both cases, the trigger is the thing that initiates an automated process that leads to a particular result, unless a conditional error occurs.” slip op. at 31

  Patent outcomesUS 11,422,951 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,422,951

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.