- Yealink (USA) Network Technology Co., Ltd. / Yealink Network Technology Co., Ltd. v. Barco NVNo claims unpatentablePTAB · Oct 5, 2026 · IPR2025-00598 · APJ David C Mckone · IPR · Final written decision
Claims 1–31 were not shown unpatentable under either § 103 ground because the asserted combinations did not teach required claim limitations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedOther
“admissions by Patent Owner in litigation, contends that a person of ordinary skill in the art would have had “a Master of Science (M.S.) degree in electrical engineering or computer science, and five years of work experience in a related field” and that “[a]dditional educational experience could substitute for some of the work experience.” Pet. 5 (citing Ex. 1002 ¶¶ 36–37). “Patent Owner does not dispute Petitioner’s proposed level of skill in the art (Petition, 5) at this time.” PO Resp. 6. On the complete record, we adopt Petitioner’s description of the level of ordinary skill in the art, as it is uncontested and is consistent with the technology described in the ’347 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“In the Preliminary Response, “Patent Owner accept[ed] the Petition’s claim construction.” Prelim. Resp. 6. However, in the Patent Owner Response, Patent Owner argues that “the claims of the ’347 Patent require no construction as they are valid under their plain and ordinary meaning.” PO Resp. 6. Based on the complete record, we do not find it necessary to provide express claim constructions of any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Expert testimonyPetitioner expert discountedDecided for patent owner
“Beel actually discloses the following: [0321] On the peripheral device 32 the video packets are received at the corresponding plug and play port, e.g. the USB port 11, read by the Human Interface Driver (HID) interface handler 13, unpacked to remove HID protocol headers in an unpacker 20 and then transmitted to the communications network by a transmitter 21. The network can be wireless for example WiFi or LiFi network. [0322] Having been routed over a communications network to the base unit 33, the incoming stream is read from the communications interface such as a WiFi access point 22, unpacked in an unpacker 25, decoded in a decoder 26 and then inserted into a suitable composition such as an OpenGL based composition in the compositor 29 for display on a central display device. Ex. 1005 ¶¶ 321–322 (emphasis added to portions quoted by Petitioner). Patent Owner notes that “[t]he Petition mistakenly cites to ¶ 322 of Beel but quotes ¶ 321.” PO Resp. 20 n.3. However, it appears that Petitioner has grafted together a portion of paragraph 321 that introduces peripheral device 32 with a portion of paragraph 322, which discusses features of base unit 33. However, this grafting has been done in such a way as to convey (incorrectly) that peripheral device 32, not base unit 33, includes unpacker 25, decoder 26, and compositor 29 that process the first processed video data received by the first peripheral device to generate second video data. Dr. Almeroth’s testimony, which copies Petitioner’s incorrectly altered quotation to paragraph 322 of Beel, is unreliable as to this claim limitation and is entitled to no weight.4 Thus, Petitioner has no expert testimony on which to rely for this claim limitation.” slip op. at 19
- Strike new argumentNew argument disregardedDecided for patent owner
“5 At the oral argument, when challenged on its reliance on paragraph 322, Petitioner argued that paragraph 321 of Beel teaches this limitation. Tr. 22:26–23:24. Petitioner did not make this argument in the Petition and, instead, raised it for the first time during oral argument; thus, it will not be considered. See Dell Inc. v. Acceleron, LLC, 884 F.3d 1364, 1369 (Fed. Cir. 2018) (“Unless it chose to exercise its waiver authority under 37 C.F.R. § 42.5(b), the Board was obligated to dismiss Dell’s untimely argument given that the untimely argument in this case was raised for the first time during oral argument.”). Even if we were to consider this new argument, it would not be persuasive. As Patent Owner observes (PO Resp. 20), any processing performed by peripheral device 32 in paragraph 321 is on data received from the processing device and destined for the base station via the network, rather than data flowing in the direction of the first processed video data of claim 1.” slip op. at 22
Patent outcomesUS 11,966,347 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · GrahamPatents in suitUS 11,966,347 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentablePTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision
Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28
Patent outcomesUS 10,574,894 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,574,894 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.
RulingsFinal written decision- BurdenFwd all claims patentableNot shown unpatentable
“4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18
- Skill levelSkill level petitioner adoptedOther
“A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentablePTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision
Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18
Patent outcomesUS 10,958,840 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,958,840 - BTL Industries, Inc. v. Inmode Ltd.No claims unpatentablePTAB · Oct 1, 2025 · IPR2024-00703 · APJ Meredith C Petravick · IPR · Final written decision
Claims 1–58 were not shown unpatentable: the Edwards, Ingle, and Mosher combination fails to establish key limitations, and Ollivier was not shown to be a prior art printed publication.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“We apply Patent Owner’s proposed definition, as it appears consistent with the field of the ’511 patent and the prior art and is consistent with testimony of Dr. Poulos and the cross-examination testimony of Dr. Berenholz. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself); Ex. 2001 ¶¶ 35–39; Ex. 2005, 55:5–17, 57:17–58:19. In our view, however, Petitioner’s proposed definition is not so different that our decision would change if we were to apply Petitioner’s proposed definition.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Patent Owner’s argument are persuasive. We agree with Patent Owner that a plain reading of the wherein clause requires the treating to begin at the introitus and extend at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. This construction is consistent with the ’511 patent’s Specification, which states: In typical embodiments, the length of the energy delivery element is about 1 to about 3 cm in length, in other embodiments it may be as long as about 4 cm. This is a length well adapted to treating the lower aspects of the vagina, wherein treatment by the method comprises contacting the vaginal epithelium in a region that extends from the introitus inward to a position about 3 to 4 cm inward from the introitus. In some embodiments of the invention, the method can b[e] practiced with a single row of parallel contract sites immediately inside the introitus. In other embodiments, the method may include deeper rows, or rows that overlap an initial row, while keeping the contact sites within the lower portion of the vagina. Ex. 1001, 3:28–40 (emphasis added); see also id. at 14:47–57. The ’511 patent Specification also states: “the portion of the vagina to be treated is a region between the introitus and a position located no further than about 3 to about 4 cm inward from the introitus.” Id. at 11:48–51 (emphasis added). Given the plain language of claim 1, consistent with the ’511 patent’s Specification, we construe “heating a portion of the vagina extending from the introitus inwardly to a location from 1 cm to 3.5 cm in from the introitus” to require heating a portion of the vagina beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus.” slip op. at 12
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Patent Owner’s arguments is persuasive. The cited portion of Mosher does not explicitly state the location of the treatment area. Ex. 1006 ¶ 74. In it Reply, Petitioner additionally points to paragraph 54 of Mosher, which states: “Preferably, the location of the treatment volume of endopelvic fascia will be disposed along a length of the urethra between the bladder neck and the external meatus so as to avoid injuring nerves.” Pet. Reply 14 (quoting Ex. 1006 ¶ 54). Petitioner argues that “[t]reating the vaginal wall adjacent to the mid-urethral region is within the claimed region of ‘from 1 cm to 3.5 cm in from the introitus.’” Pet. Reply 14–16. This, however, does not teach the claimed area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. The Petition fails to show that either Edwards or Mosher discloses heating a portion of the vagina beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. In its Reply, Petitioner argues that it would have been obvious to modify Edwards to treat the area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. See, e.g., Pet. Reply 2–4, 16–17 (citing Pet. 35). The Petition’s argument is unpersuasive because it is conclusory and does not adequately address Edwards’s use of a speculum. Pet. 35. The Petition includes no” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“In its Reply, Petitioner argues that it would have been obvious to modify Edwards to treat the area beginning at the introitus and extending at least the first centimeter into the vagina and up to 3.5 cm in from the introitus. See, e.g., Pet. Reply 2–4, 16–17 (citing Pet. 35). The Petition’s argument is unpersuasive because it is conclusory and does not adequately address Edwards’s use of a speculum. Pet. 35. The Petition includes no persuasive explanation as to why it would have been obvious to modify Edwards to use the treatment blade without the speculum. See Pet. 22–24, 35–36. We determine that Petitioner fails to meet its burden to show by a preponderance of the evidence that claim 1 is unpatentable over Edwards, Ingle, and Mosher.” slip op. at 26
Patent outcomesUS 8,961,511 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,961,511 - Hesai Technology Co., Ltd. v. Ouster, Inc.No claims unpatentablePTAB · Mar 13, 2025 · IPR2023-01422 · APJ Jon M Jurgovan · IPR · Final written decision
The Board held claims 1–2, 4–9, 11–14, 16–17, and 19–25 not shown unpatentable over the asserted obviousness grounds, principally because the combinations lacked claimed limitations.
RulingsFinal written decision- Skill levelSkill level board ownDecided for patent owner
“Considering the applicable factors in light of the parties’ contentions, we adopt the following level of ordinary skill in the art, which we apply in this Decision: A person of ordinary skill in the art would have had an undergraduate degree in mechanical or electrical engineering and two to three years of work experience with electro-optical and electro-mechanical devices or systems, relevant to light ranging systems. Less work experience would have been compensated by a higher level of education or vice versa. The work experience would have included at least one year relevant to light ranging systems including LIDAR with a rotor-stator structure. We determine that this level of skill is consistent with the problems and solutions identified in the ’515 patent and the prior art. See, e.g., Okajima v. Bourdeau, 261 F.3d 1350 (Fed. Cir. 2001); Ex. 1001, 1:30–3:48; Ex. 1004 ¶¶ 3–10; Ex. 1005, 1:1–2:31; Ex. 1006, 1:1–2:60; Ex. 1007, 1. We also determine that the proposed level of skill is reflective of the education and experience a person of ordinary skill would have had. Ex. 1003 ¶¶ 39–41; Ex. 2004 ¶¶ 67–68.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“We determine that the claimed “stator circuit board” and “stator assembly” are separate and distinct elements in claims 1 and 14 because they are set forth as separate elements in these claims. See Ex. 1001, 48:27–29, 48:37–42, 50:8–10. Similarly, claim 22 recites “a stator circuit board assembly” that includes as subcomponents “a first circuit board,” “a second circuit board,” and a “stator assembly” which are separate and distinct subelements. Id. at 51:49–59. “Where a claim lists elements separately, ‘the clear implication of the claim language is that those elements are ‘distinct component[s]’ of the invention.” Becton, Dickinson and Co. v. Tyco Healthcare Gr., LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (citing Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004); Engel Indus., Inc. v. Lockformer Co., 96 F.3d 1398, 1404–05 (Fed. Cir. 1996)). This construction is confirmed by the ’515 patent’s specification. For example, the specification states that stator assembly 644 is affixed to circuit board 622, and, consistent with this statement, Figures 6A and 6D show them as separate elements joined together. Ex. 1001, 28:28–31, 30:16–24. Contrary to Petitioner’s contention, the specification’s stating that the stator elements are “built onto” or “integrated on” circuit boards (or assemblies containing them) does not mean that the stator assembly and circuit board are the same thing. Pet. Reply 1 (citing Ex. 1001, 4:19–22, 4:28–31). Rather, the specification describes the stator elements as part of the stator assembly which is coupled to a circuit board, as follows: VII. Integrated Electric Motor According to certain embodiments, an electric rotary motor can be integrated directly onto the circuit boards. The motor can have a "pancake" or "axial" design having a planar rotor assembly on a rotor board that opposes a planar stator assembly on an opposing stator board. The stator and rotor assemblies of the electric motor can be integrated onto the boards of the rotary actuator 608, i.e., the elements of the electric motor are one of many components on the surface of the printed circuit boards and thus a separate motor module is not required for LIDAR system 600. For example, referring back to FIG. 6D, stator assembly 644 can include an annular arrangement of multiple stator elements 644(i), e.g., vertically oriented solenoids (having their longitudinal axes perpendicular to the surface of the board) that are affixed (e.g., using an adhesive) to a board of the lower circuit board assembly 620 (e.g., board 622) or to a soft magnetic core that is then affixed to the lower circuit board assembly 620. Ex. 1001, 30:16–22. Thus, the ’515 patent’s specification expressly states that the stator elements of the stator assembly can be affixed to a printed circuit board, and thus the stator assembly is not the same thing as the board. Other parts of the specification are consistent with this view. See, e.g., id. at 4:54–57, 5:14–18, 6:50–53, 16:22–25.” slip op. at 23
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“We have construed claim 1’s limitation 1(g) to require “stator circuit board” and “stator assembly” that are separate and distinct elements. See § III.C.1, supra. Johnson discloses coil windings that are formed by patterning interleaved structures in a multi-layered printed circuit board (PCB) forming the stator platform 330, and interconnecting them in groups with vias filled with conductive material. Ex. 1005, 11:66–13:57. Figs. 3C–3D; Ex. 2004 ¶¶ 138–139. We agree with Patent Owner that a POSITA would have considered the coil windings to be subcomponents of Johnson’s stator platform 330, which do not define a separate and distinct “stator assembly . . . coupled to a stator circuit board.” Ex. 2004 ¶ 139. In other words, the “printed” conductive tracks and traces would have been considered part of the PCB, not something separate. Id. Although Petitioner contends that Johnson discloses other embodiments in which a stator assembly is comprised of wires wound around a magnetic core (Pet. Reply 14–15 (citing Ex. 1005, 3:30–39, 4:56– 5:7; Ex. 1050 ¶ 30)), Petitioner does not show that Johnson discloses that those embodiments are coupled to a stator circuit board as recited in claim 1’s limitation 1(g). Petitioner did not rely on Pacala, Pardhan, nor Zhang to cover the deficiencies of Johnson. Accordingly, for the above reasons, we determine that Petitioner has” slip op. at 41
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Patent Owner’s arguments are persuasive. Johnson, Pardhan, and Zhang all disclose transformer coils positioned inside of the rotor/stator elements of the motor. Specifically, Johnson’s Figure 3B shows a transformer coil 310b positioned inside rotor elements (magnets 320, 322, 324, 326), and Figure 3C shows the corresponding transformer coil (unnumbered) inside of the stator coils defined by conductive structures. Ex. 1005, 11:51–60, 13:26–40. Similarly, Pardhan shows in Figure 7B a transformer 740a, 740b positioned inside of rotor/stator elements 738a, 738b, and suggests that a smaller rotary transformer is desirable. Ex. 1006, 20:64–21:13. Likewise, Zhang’s Figures 2 and 3 show an electrical power transmission unit including first coupling coil (5) and second coupling coil (unnumbered) positioned inside of motor coil (2). Ex. 1007, 4–5. Against the teachings of Johnson, Pardhan, and Zhang, Petitioner argues that putting the transformer coils outside of the stator coils would have been an obvious design choice. Pet. 50–51, 54–55. However, as Patent Owner noted, “merely stating that a particular placement of an element is a design choice does not make it obvious.” PO Resp. 50 (citing Polaris Indus., Inc. v. Arctic Cat, Inc., 882 F.3d 1056, 1067–70, 1069 n.4 (Fed. Cir. 2018); Ex. 2004 ¶ 186). That Johnson, Pardhan, and Zhang all disclose the transformer coils inside of the rotor/stator elements of the motor suggests that there were good reasons for doing this in their configurations. Zhang expressly teaches that one such reason is to avoid interference with power transmission.15 Ex. 1007, 3. Thus, according to Zhang, moving transformer coils outside of the rotor/stator elements in Petitioner’s combination would undesirably interfere with power transmission such that a POSITA would not have pursued the combination. Accordingly, we find that claim 22’s limitation 22(h) is missing from the combination of Pacala, Johnson, Pardhan, and Zhang.” slip op. at 53
Patent outcomesUS 11,287,515 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,287,515 - Microsoft Corporation / Affirmed Networks, Inc. v. Lemko CorporationNo claims unpatentablePTAB · Aug 30, 2024 · IPR2023-00529 · APJ Brian D Range · IPR · Final written decision
Claims 1–8, 11–16, and 21 were not proven unpatentable over Mauer and Waylett because the asserted combinations did not teach key claim limitations.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“II. ANALYSIS A. LEVEL OF ORDINARY SKILL Petitioner defines the person of ordinary skill in the art as follows: As of February 2006, a person of ordinary skill in the art (“POSITA”) would have been a person with a degree in 1 The Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), amended 35 U.S.C. § 103. Because the challenged claims of the ’414 patent have an effective filing date before the effective date of the applicable AIA amendments, we refer to the pre-AIA version of 35 U.S.C. § 103 throughout this Decision. 2 Mauer et al., U.S. Patent No. 7,395,085 B1, issued July 1, 2008 (Ex. 1005, “Mauer”). 3 Waylett et al., U.S. Patent No. 8,184,603 B2, issued May 22, 2012 (Ex. 1006, “Waylett”). computer science, electrical or computer engineering, physics, or a similar discipline . . . [and] would also have at least two years of relevant experience including, for example, work related to telecommunications networks. Pet. 3 (citing Ex. 1003 ¶ 54). The institution decision adopted Petitioner’s definition of a person having ordinary skill in the art. Dec. on Inst. 11–12. Patent Owner applied this definition for its response. Resp. 19. Petitioner’s undisputed definition of a person of ordinary skill in the art is reasonable and consistent with the prior art and ’414 patent specification. Based on the record before us, we adopt Petitioner’s undisputed proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“Petitioner does not submit constructions for any claim terms. According to Petitioner, “[t]he Board construes claims under the same standard used in civil actions in federal district court. The district court for the related litigation has not yet construed the claim terms.” Pet. 7. The parties provided briefing regarding construction of “distributed mobile architecture (DMA).” Resp. 19–34; Pet. Reply 1–3; PO Sur-reply 11–14. But we do not need to construe “distributed mobile architecture (DMA)” to resolve this inter partes review. We thus do not construe this claim term. We also do not discern a need to construe explicitly any other claim language because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We discuss the meaning of ’414 patent claims to the extent necessary to resolve the issues we address below. Id.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached
“a) Combination of Mauer and Waylett In support of both Ground 1 and Ground 2, Petitioner argues that a person of ordinary skill in the art would have been motivated to combine Mauer’s and Waylett’s disclosures, “using Waylett’s Network-in-a-box 224 in each of Mauer’s WWAN 14 and WLAN 12, resulting in at least two DMA systems.” Pet. 11–13. Asserting that “Mauer teaches providing sufficient network coverage by use of different kinds of networks, network interfaces, and protocols,” Petitioner contends that a person of ordinary skill in the art would have recognized that “Waylett discloses an inexpensive way to implement the same networks used in Mauer’s WWAN 14 and WLAN 12.” Id. Citing similarities in Mauer’s and Waylett’s systems, Petitioner argues that “a POSITA would have been able to modify Mauer’s WWAN 14 and WLAN 12 networks so that each network uses Waylett’s NIB 224.” Id. at 14. According to Petitioner, the combination would have included a number of beneficial features from Mauer. Id. at 14–15. Petitioner further advances three reasons that a person of ordinary skill would have had to combine the references’ teaching. Id. at 15–16. First, asserting that Waylett discloses cost benefits and Mauer discloses “an improved method and system for notifying mobile stations,” Petitioner contends the “references each provide reasoning” to combine their disclosures. Id. at 15. Second, Petitioner argues that a person of ordinary skill in the art would have been motivated to “improve Mauer’s distributed wireless network system by consolidating it into a single box, making it compact in design allowing for faster deployment.” Id. at 16. “Third, Waylett’s NIB would help mitigate the shared concern of Mauer—that is, reaching a mobile station as it roams or moves outside of the service or coverage area.” Id.” slip op. at 24
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“Petitioner does not establish that Mauer sends calls to voicemail based on the two determinations claim 1 recites. Resp. 55–56. In particular, as we explain above, claim 1 requires making use of the DPR after first determining the second mobile subscriber is not located within a first wireless coverage area based on HLR and VLR information and also determining that the second mobile subscriber is not located within a second wireless coverage area based on certain CLR information. The Petition, at best, attempts to establish that Mauer directs to voicemail when a “communication session cannot be established over the first or second wireless network.” Pet. 37. But a general determination that a “communication session cannot be established” does not teach or suggest claim 1’s specific requirements that first, the DPR is utilized in the specific circumstance that the second mobile subscriber is not located within the first wireless coverage area (with this determination being made based on HLR and VLR information), and second, that the DPR is also not located within the second wireless coverage area (with this determination being made based on CLR information). See PO Sur-Reply 8–9; Ex. 2001 ¶¶ 111–113. For the reasons above, Petitioner does not establish by a preponderance of the evidence that the combined art teaches or suggests the final “when” recitation of claim 1.” slip op. at 29
Patent outcomesUS 7,653,414 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,653,414 - Axonics, Inc. v. Medtronic, Inc.No claims unpatentablePTAB · May 30, 2024 · IPR2020-00712 · APJ James A Tartal · IPR · Remand
Claims 3–6, 9–12, and 15–18 were not proven unpatentable because the petitioner failed to show the required two inputs in the asserted prior art.
RulingsRemand decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner
“The Specification of the ’148 patent states that “an alignment measurement may be made by measuring a value, e.g., current or voltage, associated with, e.g., proportional to, the current passing through [the] rechargeable power source.” Id. at 21:3–6. We therefore find that the Specification expressly identifies “current or voltage” as examples of “a value.” Id. In the FWD, we stated that “[a]lthough the ’148 patent makes clear that ‘a value’ may include, for example ‘voltage,’ we agree with Patent Owner that the two independent limitations should be construed such that the Value Limitation does not render superfluous the Signal Limitation or the Measured Voltage Limitation.” FWD 26. We further determined that “the Value Limitation and the Signal Limitation, as well as the Value Limitation and the Measured Voltage Limitation both require two separate inputs to the external power source.” Id. That determination is not at issue here. See Axonics, 75 F.4th at 1379–80 (stating that Petitioner did “not argue the Board erred in adopting the two-input claim construction”). 2. Additional Claim Terms We find no additional claim term requires express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 22
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art The person of ordinary skill in the art is a hypothetical person who is presumed to have known the relevant art at the time of the invention. In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” Id. (citation omitted). Petitioner contends that a person of ordinary skill in the art at the time of the invention “would have had at least a bachelor’s degree in electrical the industry working with implantable medical devices such as cardiac pacemakers or defibrillators.” Pet. 8. Patent Owner argues that a person of ordinary skill “would have had at least a bachelor’s degree in a relevant field (e.g., electrical, mechanical, or biomedical engineering) with at least two years of experience with the design of components (e.g., circuitry) for implantable medical devices and associated external devices (e.g., a charging unit),” and that “[m]ore education can substitute for practical experience and vice versa.” PO Resp. 4–5 (citing Ex. 2002 ¶¶ 21–22). Our analysis here, as in the FWD, does not turn on which of the Parties’ competing definitions of ordinary skill is applied. See FWD 16. Moreover, the appropriate level of ordinary skill is not in dispute on remand. Consistent with the FWD and the Decision on Institution, we apply the level of ordinary skill in the art proposed by Petitioner. See Inst. Dec. 11 (stating that “the ’148 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of appropriate skill reflected in these references . . . is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner” (citing Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001))); FWD 16.” slip op. at 18
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“By contrast, in his Rebuttal Declaration, Dr. Mihran disputes Dr. Panescu’s new description of the operation of Schulman, noting that the current through R9 is not increased as a result of the current regulator R8/Q7 turning on, but that “[i]nstead, it is the increase in current through R9 in excess of the desired 40 mA operating current that causes the current regulator R8/Q7 to turn on, which acts to shunt this excess current through Q7, thereby diverting it away from the battery to maintain the desired operating condition during charging.” Ex. 2010 ¶ 6 n.3 (citing Ex. 1005, 5:2–7, 5:15–38, 9:57–68). We credit the testimony of Dr. Mihran, as supported by the cited portions of Schulman, over the unsupported testimony of Dr. Panescu in regard to how Schulman operates to measure current at R9. See id. However, whether Schulman discloses automatically varying the output power of the external power source based on a value associated with current passing through the internal battery, as required by the Value Limitation, is not in dispute. Dr. Mihran, for example, states that “Schulman discloses that the sole input provided to the external power” slip op. at 34
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“Patent Owner argues, and we agree, that the measured current through R9 is the only input to the external power source Schulman APO Sur-reply 14–15. Patent Owner further argues, and we further agree, that the voltage across output leads 51 and 52 of Schulman is not an input to the external power source separate from the measured current through R9 in Schulman. See APO Sur-reply 11–16 (citing, e.g., Ex. 1003 ¶ 75; Ex. 2002 ¶ 46; Ex. 1005, 6:35–38; Ex. 2010 ¶¶ 4–7). In support of Patent Owner, Dr. Mihran states that “[t]he voltage between nodes 51 and 52 is never provided to the external power source in Schulman.” Ex. 2010 ¶ 4. According to Dr. Mihran, “Schulman discloses that the sole input provided to the external power source that the external power source uses to automatically regulate its power output is the input that derives from the amount of current flowing through the current sampling resistor R9.” Id. ¶ 5 (emphasis omitted) (citing Ex. 1005, 4:45–53, 6:35–38; Ex. 2002 ¶ 46). Dr. Mihran further states as follows: My understanding of Dr. Panescu’s opinion is that he does not contend that the voltage between nodes 51 and 52 is ever sent to the external power source as an input, and instead simply asserts that if “the voltage across leads 51 and 52 exceeds a predetermined amount,” then the current through R9 increases, which in turn “causes the power supplied by the external power source to decrease.” (Ex. 1012 at ¶16.) This does not represent a separate input, however, because the input derived from the current flowing through the current sampling resistor R9 (i.e. the load modulation frequency of telemetry circuit 12, the components of which “form a free-running multivibrator”) is what Dr. Panescu also identifies as satisfying the first input, “a value associated with said current passing through said internal battery.” (Ex. 1012 at ¶14 (“when the current through the internal battery . . . increases above a predetermined target value, the current regulator turns on, increasing the current through current sampling resistor R9.”) operating conditions may influence the value” of the amount of current flowing through current sampling resistor R9, and the current through R9 is the “only value that is communicated to the external power source,” corresponding to a single input that “cannot satisfy both of the two inputs required by claims 3, 6, 9, 12, 15, and 18 of the ’148 patent.” Id. ¶ 6. Dr. Mihran further states as follows: I understand Dr. Panescu’s opinion to be that, because Schulman discloses that the current through R9 is used by the external charger to automatically vary its output, any “value” that influences the amount of current through resistor R9 is a “separate respective input[] used by the external power source as a basis for automatically varying its power output.” ([Ex. 1012 ¶14].) In other words, Dr. Panescu simply identifies a voltage across two points in the circuit that he claims affects the current through R9 and contends that that voltage satisfies one of the two required separate inputs based on its alleged indirect impact on the output of the external charger. This strained interpretation of the claims renders superfluous the two separate inputs to the external power source required by claims 3, 6, 9, 12, 15, and 18 of the ’148 patent: (1) “a value associated with said current passing through said internal battery” and (2) “a signal proportional to said current passing through said internal battery” (claims 3, 9, and 15) and “measured voltage associated with said current passing through said internal battery” (claims 6, 12, and 18). In any circuit, there may be multiple components (e.g., transistors, switches, diodes, etc.) that can influence the current through a particular resistor. For example, in Schulman the current drawn by the stimulation portion of the implant circuit will influence the amount of current through R9. Dr. Panescu’s interpretation that a voltage or current at these components represents a “separate input” in Schulman is incorrect, because the sole input that is telemetered back to the external charger is the input derived from the amount of current flowing through R9.” slip op. at 35
Patent outcomesUS 8,738,148 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,738,148 - Axonics, Inc. v. Medtronic, Inc.No claims unpatentablePTAB · May 30, 2024 · IPR2020-00680 · APJ James A Tartal · IPR · Remand
On remand, the Board determined that claims 1, 5, and 9 were not shown unpatentable as anticipated by Schulman, Fischell, or Baumann.
RulingsRemand decision- BurdenNot shown unpatentable
“consider for purposes of the FWD. We also consider Patent Owner’s Amended Sur-reply, as supported by the Rebuttal Declaration of Dr. Mihran, and the arguments and evidence advanced in the post remand briefs of the Parties. Based on the totality of the record in this case, we determine, for the reasons that follow, that Petitioner does not show by a preponderance of the evidence that any of claims 1, 5, or 9 is anticipated by Schulman, Fischell, or Baumann. A. Principles of Law A claim is anticipated if a single prior art reference either expressly or inherently discloses every limitation of the claim. Orion IP, LLC v. Hyundai Motor Am., 605 F.3d 967, 975 (Fed. Cir. 2010). “A single prior art reference may anticipate without disclosing a feature of the claimed invention if such feature is necessarily present, or inherent, in that reference.” Allergan, Inc. v. Apotex Inc., 754 F.3d 952, 958 (Fed. Cir. 2014) (citing Schering Corp. v. Geneva Pharm., 339 F.3d 1373, 1377 (Fed. Cir. 2003)).” slip op. at 17
- Skill levelSkill level petitioner adoptedOther
“B. Level of Ordinary Skill in the Art The person of ordinary skill in the art is a hypothetical person who is presumed to have known the relevant art at the time of the invention. In re GPAC, Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” Id. (citation omitted). of the invention “would have had at least a bachelor’s degree in electrical engineering or an equivalent as well as at least five years of experience in the industry working with implantable medical devices such as cardiac pacemakers or defibrillators.” Pet. 7. Patent Owner argues that a person of ordinary skill “would have had at least a bachelor’s degree in a relevant field (e.g., electrical, mechanical, or biomedical engineering) with at least two years of experience with the design of components (e.g., circuitry) for implantable medical devices and associated external devices (e.g., a charging unit),” and that “[m]ore education can substitute for practical experience and vice versa.” PO Resp. 5 (citing Ex. 2002 ¶¶ 21, 22). Our analysis here, as in the FWD, does not turn on which of the Parties’ competing definitions of ordinary skill is applied. See FWD 16. Moreover, the appropriate level of ordinary skill is not in dispute on remand. Consistent with the FWD and the Decision on Institution, we apply the level of ordinary skill in the art proposed by Petitioner. See Inst. Dec. 11–12 (stating that “the ’758 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of appropriate skill reflected in these references is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner” (citing Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001))); FWD 16.” slip op. at 17
- Expert testimonyPatent owner expert creditedPetitioner expert discountedOther
“By contrast, in his Rebuttal Declaration, Dr. Mihran disputes Dr. Panescu’s new description of the operation of Schulman, noting that the current through R9 is not increased as a result of the current regulator R8/Q7 turning on, but that “[i]nstead, it is the increase in current through R9 in excess of the desired 40 mA operating current that causes the current regulator R8/Q7 to turn on, which acts to shunt this excess current through Q7, thereby diverting it away from the battery to maintain the desired operating condition during charging.” Ex. 2010 ¶ 6 n.2 (citing Ex. 1005, 5:2–7, 5:15–38, 9:57–68). We credit the testimony of Dr. Mihran, as supported by the cited portions of Schulman, over the unsupported testimony of Dr. Panescu in regard to how Schulman operates to measure current at R9. See id. However, whether Schulman discloses automatically varying the output power of the external power source based on a measured current, as required by the challenged claims, is not in dispute. Dr. Mihran,” slip op. at 32
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We find that because it is largely unsupported and conclusory, the opinion of Dr. Panescu in his Supplemental Declaration that “Schulman teaches automatically varying the output power of the external power source based on a value, where the value is the voltage across the output leads 51 In his original declaration, Dr. Panescu made clear that, according to Schulman, the output of the external power source was lowered if the charging current, as measured at sampling resistor R9, “exceeds a maximum capacity,” not because of the voltage across output leads 51 and 52. See Ex. 1003 ¶ 127 (quoting Ex. 1005, 7:25–29). Petitioner does not allege that any measurement of voltage across output leads 51 and 52 in Schulman is conveyed to an external power source to automatically vary its power output. Instead, Petitioner’s argument is premised on the notion that if the voltage across leads 51 and 52 exceeds a predetermined amount, then it will affect the current sampled by resistor R9. We also find persuasive Dr. Mihran’s testimony that Petitioner’s strained interpretation renders the Value Limitation superfluous to the Measured Current Limitation because the voltage across leads 51 and 52 was not shown by Petitioner to be a separate input to the external power source. See Ex. 2010 ¶ 7 (explaining that “there may be multiple components (e.g., transistors, switches, diodes, etc.) that can influence the current through a particular resistor,” and that influencing the current measured at R9 does not constitute a separate input to the external charger from the measured current at R9). To be clear, we need not resolve whether the challenged claims require each separate input be separately conveyed to the external power source. Here, the burden to show anticipation is on Petitioner and Petitioner offers no persuasive evidence or explanation to establish by a preponderance of the evidence that a person of ordinary skill in the art would have understood the voltage across output leads 51 and 52 corresponds to “a value” based upon which the external power source “automatically” varies its power output, as required by the challenged claims. Nor does skill in the art would have understood the voltage across leads 51 and 52 in Schulman to be a separate input from the measured current at R9 when, at most, Petitioner alleges the voltage across leads 51 and 52 may, in certain circumstances, have some effect on the measured current at R9, itself. Thus, Petitioner does not show by a preponderance of the evidence that Schulman discloses to a person of ordinary skill in the art two separate inputs to the external power source, as Petitioner conceded is required by the Value Limitation and the Measured Current Limitation.” slip op. at 35
Patent outcomesUS 8,457,758 not shown unpatentableClaim construction§ 102 anticipationcites PhillipsPatents in suitUS 8,457,758 - Tesla, Inc. v. Charge Fusion Technologies, LLCNo claims unpatentablePTAB · May 2, 2024 · IPR2023-00063 · APJ Jeremy M Plenzler · IPR · Final written decision
Claims 1–5, 7–11, and 14–16 were not proven unpatentable because Hibi does not teach operating climate control based on battery level or determining available climate-control time from that level.
RulingsFinal written decision- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentable
“d) Analysis We agree with Petitioner that Hibi teaches operating its climate control system in an AUTO mode for a duration of time. That time can be up to and beyond the low battery abnormality condition. As explained above, the claim language at least requires instructions that operate the climate control mechanism based on the predetermined battery level in some manner. Patent Owner is correct that Hibi does not care about its battery level for operation of its climate control mechanism. See PO Resp. 42–44. Patent Owner is also correct that “in response to a low battery event, Hibi’s system simply turns on the engine and charges the battery.” Id. at 43 (citing Ex. 1008, Fig. 5). And as Patent Owner further notes, “if a user selects a climate control temperature in system setting mode of Hibi, that temperature is unchanged in response to a low battery event” and “[i]nstead, the temperature remains constant in response to the low battery, as Hibi’s vehicle simply turns the gas engine on and charges the battery.” Id. (citing Ex. 1008 ¶ 43, Fig. 5; Ex. 2004 ¶¶ 91–94; Ex. 2005, 53:13–54:14). Because Hibi does not consider battery level for the operating instructions associated with its climate control system, Petitioner’s challenge to claim 1 fails. In its Reply Petitioner responds to Patent Owner’s contentions by addressing a scenario where limitation 1[h] requires ceasing the selected mode of operation. See Pet. Reply 19–20. As explained above, we do not read limitation 1[h] as requiring ceasing the selected mode of operation. And Petitioner’s explanation in its Reply does not address the issue with its challenge noted above. That is, even in its contentions regarding Hibi ceasing operation, Petitioner still relies on operation where Hibi’s climate control system is operated wholly independent of battery level considerations. See id. at 19 (discussing ceasing operation in Hibi based on a change from climate control with battery on to climate control with engine on). There does not appear to be any dispute that Hibi operates its climate” slip op. at 22
Patent outcomesUS 10,819,135 not shown unpatentable§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,819,135
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.