- Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentablePTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision
Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other
“Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner
“We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner
“We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29
Patent outcomesUS 11,886,774 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,886,774 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Jul 22, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Remand
On remand, the Board maintained its finding that claims 2 and 17 are unpatentable under §103 over Diekmann and Ma, and Suzuki and Ma.
RulingsRemand decision- RemandDecided for petitioner
“that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“Dependent claims 2 and 17 require an electron transport layer (ETL) that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2
Patent outcomesUS 11,828,425 unpatentable§ 103 obviousnessPatents in suitUS 11,828,425 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00371 · APJ Brian D Range · IPR · Final written decision
Claims 1–25 are unpatentable as obvious under § 103 over the asserted combinations of Takagi, Cornette, Suehiro, GMW14400, Laurent, and Vaissiere.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶ 15). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’227 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for patent owner
“1. superficial layer The only independent claim at issue, claim 1, recites a “Superficial layer.” Ex. 1001, 15:6. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’227 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Extrinsic evidence (dictionaries, experts)Term construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the extrinsic sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions). Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’227 patent, we focus on the patent claims and specification. Claim 1 indicates that the intermetallic layer has a “mean composition” (emphasis added). Ex. 1001, 15:1–10. This indicates, albeit weakly, that iron composition across the layer may vary rather than having ordered stoichiometry—consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Ex. 1001, 2:47–50. Meanwhile, nothing in the ’227 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Rabbe’s testimony. Dr. Rabbe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’227 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:60–64 (“FIG 2. Illustrates a coating … which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076 ¶ 166; Ex ¶ 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s construction of “intermetallic” for this proceeding does not fully account for the ’227 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently mean compositions) different labels.” slip op. at 16
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Because IHS was a company that created an online database with the purpose of providing (selling) standards including General Motors standards to the public, we determine that a person of ordinary skill in the art would have known to look to this database and would have been able to find GMW14400. Patent Owner presents no evidence to the contrary. Because a preponderance of the evidence supports Petitioner, we determine Petitioner establishes GMW14400 is qualifies as prior art.” slip op. at 21
Patent outcomesUS 11,326,227 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,326,227 - Posco Co., Ltd. v. ArcelormittalAll claims unpatentablePTAB · Jul 16, 2026 · IPR2025-00370 · APJ Brian D Range · IPR · Final written decision
Claims 1–30 are unpatentable as obvious under § 103 over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art (POSITA) “would have had an undergraduate degree in materials science, manufacturing engineering, mechanical engineering, or equivalent knowledge, training, or experience, with two years of experience working in metallurgy.” Pet. 6 (citing Ex. 1003 ¶¶ 13–16). Patent Owner does not challenge Petitioner’s definition of a POSITA for this proceeding. PO Resp. 8. Because the parties agree and because Petitioner’s proposal is reasonable and consistent with the ’602 patent specification and the prior art, we adopt Petitioner’s proposal. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“1. superficial layer All independent claims at issue, claims 1, 21, and 24, recite a “superficial layer.” Ex. 1001, 15:11, 16:60, 17:21. Patent Owner argues that, based on plain and ordinary meaning, the term “superficial layer” refers to a “surface layer” or “top layer.” PO Resp. 8–9. Petitioner does not dispute this construction. See Pet. Reply 21–22 (arguing that the relevant layer of the Suehiro reference is a superficial layer because it is outermost and present at the surface). Because the parties are in agreement and because that agreement is consistent with plain language, claim language, and the ’602 specification, we construe “superficial layer” as referring to a surface layer or top layer.” slip op. at 10
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“defined stoichiometry” (Ex. 2037, 527) but the word may also be a “generic term for phases . . . which may have a narrow or extended compositional stability range” (id.). The first glossary meaning is consistent with Patent Owner’s position. The second, broader, glossary meaning is consistent with Petitioner’s position. Some of the sources before us support the broad definition, and some support the narrow definition. See PO Sur-Reply 3–4 (arguing that Dr. Miles admitted that various treatises distinguish intermetallic compounds from alloys and solid solutions) Thus, neither Dr. Miles or Dr. Raabe is “wrong scientifically” in how they use the term “intermetallic” in this proceeding. Id. at 2 (noting that Dr. Miles agreed that Dr. Raabe’s construction is not wrong scientifically). As explained below, however, only one of these meanings is appropriate here. To decide which possible meaning applies to the ’602 patent, we focus on the patent claims and specification. The claims indicate that the intermetallic layer has a “mean iron composition” (emphasis added). Ex. 1001, 15:6–10. This indicates, albeit weakly, that the iron composition across the layer may vary rather than having ordered stoichiometry— consistent with Petitioner’s position. The specification also indicates that “intermetallic alloying” is a possibility—again, consistent with Petitioner’s position. Id. at 2:50–54. Meanwhile, nothing in the ’602 specification explicitly (or implicitly) suggests that “intermetallic layer” must be limited to elements atomically joined with defined stoichiometry in an ordered crystal structure. We also find that Dr. Miles’s testimony regarding the meaning of “intermetallic” is more credible than Dr. Raabe’s testimony. Dr. Raabe, in deposition, stated that Figure 2 of the challenged patent “does not show a layer that meets [his] construction of intermetallic.” Ex. 1078, 129:21–24. The ’602 patent, however, states that Figure 2 includes an “Al-rich Intermetallic layer.” Ex. 1001, Fig. 2, 3:57–61 (“FIG 2. Illustrates a coating . . . which does not correspond to the invention. This succession of layers (interdiffusion layer and intermetallic layer) yields inferior results in resistance spot welding.”). Also, Dr. Raabe previously referred to a layer of Takagi as having “intermetallic phase layering and structure.” Pet. Reply 4 (citing Ex. 1076, 166; Ex. 1075, 17) (emphasis omitted). Thus, Dr. Raabe’s definition of “intermetallic” does not fully account for the ’602 patent usage of the word “intermetallic” and does not fully account for Dr. Raabe’s prior usage of the word “intermetallic.” Patent Owner argues that Petitioner’s construction “erases the meaningful distinction” between the claimed layers. PO Resp. 11. Patent Owner further argues that Petitioner’s construction renders the word “intermetallic” superfluous because allowing the intermetallic layer to be “merely a multi-element alloy erases the meaningful distinction among these layers.” Id. We disagree. The word intermetallic serves to require that the layer be composed of two or more metals or a metal and a metalloid. The word intermetallic also serves as a label to differentiate each of the four claimed layers. For example, in claim 1, the word “intermetallic” is used much like the words “interdiffusion” and “intermediate” to give each of the four layers (each having differently defined mean iron compositions) different labels.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“have had reason to combine teachings of Takagi and Cornette with a reasonable expectation of success. Pet. 11–20 (citing, e.g., Ex. 1003 ¶¶ 28– 42; Ex. 1016 ¶ 35; Ex. 1014, 9; Ex. 1025, 5:17–20; Ex. 1026, 7; Ex. 1034 ¶ 13). In particular, Petitioner argues that Takagi discloses a pre-coating thickness of 10–20 µm but does not explicitly disclose a post hot-stamping coating thickness corresponding to the pre-coating thickness. Pet. 11. Cornette teaches that the hot-stamping thickness causes coating expansion from 25 µm to about 40 µm, an increase of 60%. Id. (citations omitted). Petitioner and Dr. Miles reason that, when hot stamping Takagi’s product, the thickness would be 32 µm. Id. (citing Ex. 1003 ¶ 32); see also Pet. Reply 20–21. Thus, Patent Owner argues that Cornette evidences Takagi’s finally coating thickness without requiring modification of Takagi. Petitioner further argues that Takagi and Cornette teach that post hot- stamping thickness could be varied and optimized as a result effective variable. Id. at 12–13; see also Pet. Reply 17–18. Cornette teaches, for example, that “[t]he average [pre-coating] layer thickness showing the best compromise between corrosion protection and weldability is 25 µm” and links this pre-coating thickness to a final thickness of “about 40 µm at the steel surface.” Ex. 1014, 9. Petitioner also argues that it would have been obvious to fill in other details of Takagi including, for example, selecting USIBOR 1500 steel, based on the teachings of Cornette. Pet. 14. Patent Owner argues that there is no reason to combine Takagi with the teachings of Cornette. PO Resp. 26. Patent Owner makes seven related arguments. Patent Owner first argues that the Petitioner’s position is speculative and lacks basis. Id. at 26–27. We disagree. Cornette evidences a final coating thickness for Takagi, and the references also suggest that final coating thickness is result effective. Second, Patent Owner argues that there would have been no incentive to seek a motivation to seek a thicker coating post-hot stamping. Id. at 28– 35. This argument does not undermine Petitioner’s position that Takagi, by itself, would have reached a thicker coating after stamping as evidenced by Cornette. Pet. 11–12. Petitioner takes the position, with evidence, that practice of Takagi alone would reach the recited thickness. No motivation to modify Takagi is required under this position.” slip op. at 25
Patent outcomesUS 10,961,602 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 10,961,602 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Mar 4, 2026 · IPR2024-01222 · APJ Garth D Baer · IPR · Final written decision
Claims 34–37 and 40–46 are unpatentable as obvious over the Yamazaki-based and Weaver-based grounds.
RulingsFinal written decision- Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner
“Patent Owner bears the burden of production to establish that its claimed invention is entitled to an earlier priority date for this fact-intensive issue. See In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1375–76 (Fed. Cir. 2016). We agree with Petitioner that the email chain does not support Patent Owner’s conception claim because it “does not discuss depositing a planarization layer, as required by both independent claims.” Pet. Reply 3. Patent Owner asserts that the inventor’s discussion of “PML” (polymer multi-layer) encapsulation in the email chain shows their conception of the claimed planarization layer because the ’389 patent describes that PMLs “‘[t]ypically’ include[e] ‘a planarization layer’ that ‘is provided to give a planar surface’ for deposition of an upper layer,” and “‘address ‘any point defects (i.e. pin holes)’ that might appear in the barrier layer’s surface.” PO Resp. 6 (quoting Ex. 1001, 1:31–37, 1:41–44, 1:56–62). We disagree with Patent Owner for two reasons. First, the challenged patent’s specification does not corroborate that the inventors conceived the claimed planarization before the challenged patent’s priority because it did not exist at the time of the email. Whether the inventors, at the time of filing, considered PMLs to typically include a planarization layer as of the claimed priority date does not support the allegation that they conceived of that same planarization layer more than a year earlier. Moreover, the ’389 patent’s teaching that “[t]ypically, for PML structures, a planarization layer 106 is formed” (Ex. 1001, 1:30–31) shows that the inventors recognized PML structures and planarization layers were distinct because only a subset of PML structures formed planarization layers, even if they do so typically. Thus, the inventor’s discussion of a PML layer in the email chain does not evidence their conception of the claimed planarization layer, as Patent Owner contends. Additionally, even if we were to understand the inventors’ mention of PML encapsulation in the emails, together with the discussion of patterning techniques for an organic layer, as discussing a planarization layer, such discussions are evidence of brainstorming ideas, rather than documenting the path taken with the claimed invention. For instance, the inventors use phrases like “don’t know if this will work,” “these are all just ‘undeveloped’ ideas,” and “looking forward to keep this discussion rolling.” Ex. 2006, 1; see also Ex. 1034, 59:22−59:18. As Petitioner argues, and we agree, these are more theoretical and future-development discussions than an exchange of a definite idea. Pet. Reply 2−3 (citing Hybritech Inc. v. Monoclonal Antibodies, Inc., 802 F.2d 1367, 1376 (Fed. Cir. 1986). For these reasons, we agree with Petitioner that Patent Owner has not” slip op. at 6
- Novelty / Anticipation (§102) › Prior-art status of a reference › Applicant-admitted prior artDecided for petitioner
“B. Whether Petitioner Relies on Applicant Admitted Prior Art Patent Owner asserts we should “not consider” Yamazaki-based challenges because Petitioner included Applicant Admitted Prior Art (AAPA) in those grounds. See PO Resp. 16 (citing Qualcomm Incorporated v. Apple Inc., 134 F.4th 1355 (Fed. Cir. 2025)) (holding that AAPA may not be part of the basis for an inter partes review). We disagree. As Petitioner notes, it “utilizes the AAPA in the alternative with Ghosh, to show that it was known to manufacture OLED devices in bulk (which [Patent Owner] does not dispute).” Pet. Reply 9. Because “[t]he Petition identifies disclosures in Ghosh that independently demonstrate the same teachings for which the AAPA is cited,” we agree with Petitioner that it does not improperly rely on AAPA for any of its challenges. Id.” slip op. at 8
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“C. Whether Yamazaki, Weaver, and Palanisamy Are Printed Publications under 35 U.S.C. § 311(b) Patent Owner asserts that Yamazaki, Weaver, and Palanisamy do not qualify as printed publications under 35 U.S.C. § 311(b) because they only qualify as prior art under § 102(e). PO Resp. 17. According to Patent Owner, “[e]ven though the Federal Circuit has held that such references are ‘printed publications’ under 311(b), to preserve arguments on appeal, Patent Owner submits that such an interpretation is inconsistent with the plain statutory language, the precedent, and non-public accessibility of an unpublished patent application.” Id. We disagree with this argument because the Federal Circuit has rejected it, as Patent Owner acknowledges. See Lynk Labs, Inc. v. Samsung Electronics Co., 2023-2346, Slip. Op. (Fed. Cir. Jan. 14, 2025).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Yamazaki does not involve multiple devices on a substrate” and Ghosh teaches “non-selective deposition of at least the barrier layer.” PO Resp. 31. We disagree with this argument because it attacks Yamazaki and Ghosh individually, rather than the combination of Yamazaki’s selective deposition and Ghosh’s plurality of devices that Petitioner asserts. See In re Keller, 642 F.2d 413, 426 (CCPA 1981). We also disagree with Patent Owner’s criticism that Petitioner fails to explain why skilled artisans would have ignored Ghosh’s non-selective deposition method for barrier layers on multiple devices. PO Resp. 32. This argument attacks a straw man as Petitioner does not propose modifying Ghosh’s method with Yamazaki’s selective deposition. See Pet. 21–23. Rather, Petitioner proposes modifying Yamazaki’s selective deposition method by applying it to Ghosh’s teaching of encapsulating a plurality of OLED devices. Id. Next, Patent Owner asserts that skilled artisans would not have extended Yamazaki’s single-device fabrication/encapsulation method to a plurality of devices on a substrate because doing so would “multiply defects and errors, drop the yield exponentially, and increase the cost.” PO Resp. 34. Patent Owner asserts that precision/defect problems would be particularly acute when using Yamazaki’s inkjet method to print devices’ electro luminescence layers. Id. at 35–36. We disagree. Even if extending Yamazaki’s method to Ghosh’s multiple devices comes at a cost of potential defects, that tradeoff would not undermine Petitioner’s proffered combination given Petitioner’s articulated benefits outline above, including facilitating manufacturing display panels for OLEDs with improved throughput, improved productivity, and reduced manufacturing costs, as compared to fabricating/encapsulating just a single device. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”). It also does not matter that “inkjet printing yielded devices of half the efficiency than spin coating,” as Patent Owner asserts (PO Resp. 35), because Petitioner does not need to show that Yamazaki’s inkjet printing would be the best option for batch fabrication/encapsulation, only that it would was a suitable one from which the prior art did not teach away. See Par Pharm., Inc. v. TWi Pharms., Inc., 773 F. 3d 1186, 1197–98 (Fed. Cir 2014). That is, Petitioner does not need to show that Yamazaki’s inkjet method was an improvement over other known fabrication/encapsulation methods, so long as it was a known fabrication/encapsulation method and skilled artisans would understand that implementing it for a plurality of devices had known advantages over fabricating/encapsulating a single device, which Petitioner identifies. See Pet. 22. We also agree with Dr. Subramanian that skilled artisans would have a reasonable expectation of success in making the proposed combination given similarities between the references (both are directed to encapsulation of an OLED display device with multiple thin-film layers and at least the first encapsulation is selectively deposited) and because “as the ’389 patent admits, in the prior art it was conventional to use batch fabrication to manufacture OLED display devices with thin-film encapsulation.” Ex. 1003 ¶ 86. As Dr. Subramanian explains, a particular advantage of inkjet printing is that it scales well to larger areas and it was known at the time of the ’389 patent that inkjet could be used to print multiple devices on a glass substrate. Ex. 1032 ¶¶ 2, 27–28. Patent Owner’s argument that “Yamazaki’s methods are far from ready for manufacturing” (PO Resp. 34) goes well beyond what is necessary to show that skilled artisans would have had a reasonable expectation of achieving what is claimed. See Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Given Petitioner’s analysis outlined above, we agree with Petitioner that it would have been obvious to skilled artisans to fabricate and encapsulate multiple OLED devices on a substrate using Yamazaki’s ink-jet methods. slip op. at 15
Patent outcomesUS 6,949,389 unpatentable§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 6,949,389 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Feb 9, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision
Claims 2, 4, 9–12, and 17 are unpatentable under § 103 because the prior-art combinations teach the claimed features and have adequate motivation and reasonable expectation of success.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art “would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 12
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“1. Whether Ma Qualifies as a Prior Art Printed Publication First, Patent Owner argues that Petitioner has not demonstrated that Ma was publicly accessible in August 2008 so as to qualify as prior art. PO 11 As Petitioner notes, the district court adopted a claim construction requiring only “one or more wavelengths” in the infrared-to-UV spectrum. PO Resp. 26 (citing Ex. 2031, 47–48). Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 10
Patent outcomesUS 11,828,425 unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,828,425 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Jan 22, 2026 · IPR2024-01093 · APJ Grace Karaffa Obermann · IPR · Final written decision
Claims 1–16 are unpatentable: claims 1–13 and 15–16 on anticipation and obviousness grounds, and claim 14 on obviousness over Choulis.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“A person of ordinary skill in the art (“POSITA”) at the time of the alleged invention of the ’164 patent would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices. An individual with additional education could have less research or industrial experience and vice versa. Pet. 12. Patent Owner repeatedly refers to “a POSITA” without addressing the definition of that term or contesting Petitioner’s proposed definition. See Resp. 1, 2 n.1, 3, 8, 9, 15–21, 23, 26, 29, 32–33, 35, 37, 38, 40, 41, 44–49, 51–57, 61, 62 (bare references to “a POSITA”). Neither party indicates that the ultimate result on patentability would change depending on the definition selected. We adopt Petitioner’s proposed definition, which is not contested, because it is consistent with the disclosures of the asserted prior art. See Ex. 1004, (code 57); Ex. 1006, code (57); Ex. 1008, code (57); Ex. 1009, code (57) (abstracts of the references asserted in the patentability challenges).” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundTerm construed board ownDecided for petitioner
“because no information raised during the trial phase of this review changes the calculus: First and foremost, the plain terms of claim 1 include no language from which we reasonably can impose limits on the phrase “matrix material” as urged by Patent Owner. In addition, the specification includes no special definition of that phrase that supports importing Patent Owner’s proposed narrowing limitation into the claim. Furthermore, we are directed to no disclaimer of claim scope during patent prosecution that would support Patent Owner’s twice-rejected argument that the phrase “matrix material” in claim 1 excludes embedded dopants and dispersed agglomerations. And the extrinsic evidence advanced by Patent Owner during this review is ineffective to override the clear interpretation of “matrix material” that is established by the intrinsic evidence. Reply 1–7.10” slip op. at 8
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed
“We find that Petitioner establishes by a preponderance of the evidence that Choulis anticipates claim 13. We agree with Petitioner, in that regard, that Choulis explicitly teaches “using spin-coating as a method for depositing materials, which involves a simultaneous application process” as required by claim 13. Reply 16 (citing Pet. 40–41; Ex. 1044 ¶ 45).16 We 15 Petitioner raises Djobo as a background reference supporting that Choulis anticipates deposition of PVK by evaporation. Pet. 41. Patent Owner counters that Djobo, to the contrary, shows that Choulis does not teach deposition of PVK by evaporation. Resp. 48. In other words, both parties cite Djobo in connection with the ground based on anticipation by Choulis. Against that backdrop, we determine that Patent Owner waives any argument that Petitioner improperly cites Djobo as a background reference in support of the anticipation challenge, which is based on Choulis alone. Resp. 48 (nowhere asserting that the challenge is deficient on that basis). That waiver arises because no argument, in that regard, is raised in Patent Owner’s Response see Inst. Dec. 34 (“The Board shall deemed waived any issue not raised by Patent Owner in a timely response to the Petition . . . .”). 16 Patent Owner’s statement that “spin coating tends to cause phase separation” is not developed adequately on this record and, therefore, is further agree with Petitioner that Patent Owner “has not contested this point.” Resp. 48. “Therefore, there is no genuine dispute regarding the unpatentability of claim 13,” although Patent Owner raises “arguments concerning evaporation, which is a distinct process from spin-coating” relevant to the additional limitations of claim 14. Reply 16. We determine that Petitioner establishes by a preponderance of the evidence that Choulis anticipates claim 13. Patent Owner, however, has the better position on whether Choulis anticipates claim 14, which “includes the requirement of applying matrix materials via evaporation coating.” Reply 16. Petitioner seems to abandon that challenge in the Reply by raising arguments that appear, on this record, to bear exclusively on whether the subject matter of claim 14 would have been obvious over Choulis.17 Id. at 16–17. Those arguments are insufficient to counter Patent Owner’s reasons why Choulis does not anticipate the “evaporation coating” limitation of claim 14. Compare id., with Resp. 48. On this record, therefore, we determine that Petitioner does not establish by a preponderance of the evidence that Choulis anticipates claim 14. unpersuasive to persuade us “that Choulis does not have three matrix materials.” Sur-reply 15. That argument runs counter to Choulis’s explicit, intrinsic disclosures, which illustrate (Ex. 1004, Fig. 4) and describe (id. ¶ 30) an organic light emitting layer composed of three matrix materials. See Pet. 24–25 (citing Ex. 1004, Fig. 4, ¶ 30); see also Ex. 1003 ¶¶ 85–88 (persuasive declaration testimony of Dr. Holmes, cited at Pet. 24–25). 17 There is some confusion on this point, given that both parties sometimes collapse, into a single argument, whether Choulis anticipates or renders obvious claim 1. Compare Resp. 48, with Reply 16–17.” slip op. at 35
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable
“On this record, therefore, we determine that Choulis, at minimum, suggests that a person of ordinary skill in the art at the time of the invention would have recognized PMMA as a suitable alternative to PVK in Choulis’s Figure 4 embodiment, notwithstanding any differences raised by Patent Owner. Ex. 1004 ¶ 44. Patent Owner’s argument that no disclosure in Choulis suggests that an ordinarily skilled artisan “would have found it desirable to use PMMA in place of PVK in Choulis’s devices” misses the mark, where Choulis includes both PMMA and PVK in lists of materials suitable for use as host or matrix materials. Resp. 38; Ex. 1004 ¶ 44. “Our caselaw is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’” Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021). Even if Choulis does not expressly disclose substituting PMMA for PVK in the Figure 4 embodiment, “an ordinarily skilled artisan would have found it obvious to make that substitution.” Reply 10 (citing Pet. 31 (citing Ex. 1003 ¶ 100; Ex. 1044 ¶ 23)). The suggestion for that substitution is set forth unambiguously in Choulis’s listing of both “PVK” and “PMMA” as materials suitable for use as a first “host” material in Choulis’s organic functional layer; that is, “the light emitting layer” that is “described above” in Figure 4. Ex. 1004 ¶ 44. ii. Alternative Reasoning for Replacing PVK with PMMA Patent Owner counterargues that using PPMA in place of PVK would have been understood to “upset the hole and electron balance,” as well as “affect hole-charge recombination,” and “degrade the performance of the resulting OLED system.” Resp. 37. Petitioner responds with evidence that “it would have been a routine task for” an ordinarily skilled artisan “to optimize the composition of each component within the light-emitting layer to achieve the desired charge balance.” Reply 11 (citing Ex. 1004 ¶ 24). Petitioner’s response brings to light a second reason why an ordinarily” slip op. at 40
Patent outcomesUS 8,723,164 unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,723,164 - Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentablePTAB · Jan 22, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision
Claims 2, 4, 9–12, and 17 are unpatentable under § 103 over the Diekmann- and Suzuki-based combinations with the respective secondary references.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7
- BurdenUnpatentable
“III. OBVIOUSNESS ANALYSIS Petitioner contends that claims 2, 4, 9–12, and 17 are unpatentable under 35 U.S.C. § 103. For the reasons explained below, we find that Petitioner has shown by a preponderance of evidence that these claims are unpatentable over the asserted prior art.” slip op. at 7
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“additional feature in claims 2 and 12, Patent Owner raises a number of challenges to Petitioner’s asserted rationale for combining Ma. See PO Resp. 27–47. First, Patent Owner asserts that skilled artisans would not have used Ma’s Liq dopant in Diekmann/Suzuki because both employ electron-donor dopants that operate differently from Liq’s electron-hopping dopant. Id. at 28–31. We disagree with Patent Owner’s argument because it highlights a difference in the references’ dopants without identifying any incompatibility. Even if Diekmann and Suzuki teach electron-donor type ndopants as Patent Owner asserts, neither precludes or disparages Ma’s electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 11
Patent outcomesUS 11,828,425 unpatentable§ 102 anticipation§ 103 obviousnessPatents in suitUS 11,828,425 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. et al. v. Eyesmatch Ltd.All claims unpatentablePTAB · Nov 21, 2025 · IPR2024-00810 · APJ Neil T Powell · IPR · Final written decision
Claims 1–18 are unpatentable: claims 1–6 and 10–12 over Rosenberg and Park, and claims 3, 4, 7–9, and 11–18 over Rosenberg, Park, and Geisner.
RulingsFinal written decision- Prior constructionPrior construction adoptedDecided for patent owner
“Turning to the substantive issues, we find the District Court’s “mirror tracking mode” construction to be well-reasoned and supported by the record, and we therefore adopt that construction and its reasoning. As the District Court points out, both the “double the distance” and “same size” aspects of its construction are expressly discussed in the ’109 patent, which is incorporated in the ’110 patent. See Ex. 2008, 16 (citing Ex. 1021, 2:5–27, Figs. 5A, 5B), 40 (citing “same reasons set forth regarding the term ‘it appears to mimic a reflection of a mirror’” in support of construction of “mirror tracking mode”). So, too, is “flipping” or reversing of the image disclosed. Id. at 17 (citing Ex. 1021, 14:46–51, 15:41–47), 40.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“persuasively address limitation 1[f]’s “mirror tracking mode.” In particular, Petitioner does not address persuasively the requirement, as explained in Section II.B above, that mirror tracking mode involves processing camera-captured images in a way that “maintains roughly the same size regardless of the user movement.” At odds with this requirement, Petitioner founds its case on an assertion that “Haan teaches the claimed mirror tracking mode” because “if the viewer is within 35 cm of the camera, a tracking mode is entered, applying resizing transformation.” Pet. 44 (emphasis added) (citing Ex. 1005 ¶¶ 75–76, 80–82, 90–94, 97; Ex. 1003 ¶¶ 205–210). The resizing transformation Petitioner references actually involves magnifying the user’s image by an amount that changes based on the user’s position relative to the camera, quite the opposite of maintaining image size regardless of the user movement. Ex. 1005 ¶¶ 75–76, Fig. 8. Thus, Petitioner’s initial position is unpersuasive. Petitioner’s shift to Haan’s “reflective mirror mode and conventional mirror period in the dual mode” is also unavailing. Reply 8. Consistent with Patent Owner’s arguments, Petitioner does not provide persuasive evidence that these operating states of Haan’s device involve any processing of camera-captured images. Sur-reply 13–14. To the contrary, Haan suggests that anytime its device provides an unmagnified image, it comes from a reflection off a physical reflective surface. See, e.g., Ex.1005 ¶ 76 (“This can be done for instance by using the device as a simple mirror, i.e. not displaying an image on the display device, but using the device in the reflective mode.”) (emphasis added), ¶ 92 (“a simple reflective mode, to act as a mirror”), ¶ 29 (“for a first range of positions, no image is displayed, whereby the reflective layer acts as a mirror, and for a second range of positions, the recorded image is displayed.”) (emphasis added). We also find unpersuasive Petitioner’s Reply arguments based on Haan’s disclosure of smoothly transitioning from “using the device as a simple mirror” (i.e., using a physical reflecting surface) to displaying a magnified image. Reply 11 (citing Ex. 1005 ¶¶ 76, 80). To the extent this may establish a point around the transition at which Haan’s system displays an image with relatively little magnification, it does not establish that Haan teaches, suggests, or renders obvious holding the displayed size roughly constant, “regardless of the user movement.” Indeed, given Haan’s focus on helping the user see things more clearly with image magnification, Petitioner’s argument that it would have been obvious to hold the size of the image constant is not persuasive. See, e.g., Ex. 1005 ¶ 4. Thus, on the whole, Petitioner’s shifting, scattered arguments do not persuasively address limitation 1[f]. Accordingly, Petitioner has not shown by a preponderance of the evidence that claim 1 would have been obvious over Haan and Francois. And Petitioner’s arguments and evidence addressing claims 2–6, 10–12, 16, and 17 do not cure the foregoing deficiencies in the challenge of claim 1. Pet. 46–52. Accordingly, Petitioner has not shown by a preponderance of the evidence that any of claims 1–6, 10–12, 16, and 17 would have been obvious over Haan and Francois.” slip op. at 23
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“We do not agree. Petitioner demonstrates persuasively that a person of ordinary skill would have combined these references “to correct image distortions and provide a more realistic mirror image.” Pet. 52–55; Ex. 1003 ¶¶ 242–249. We are not persuaded by Patent Owner that by specifically disclosing “flipping” the image, Rosenberg is discouraging or teaching away from performing other transformations to achieve its objective of “replicat[ing] the performance of a standard household mirror.” See PO Resp. 35, 38–39 (Patent Owner asserting lack of motivation to combine the references). A reference may be said to “teach away” “when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” Galderma Lab'ys, L.P. v. Tolmar, Inc., 737 F.3d 731, 738 (Fed. Cir. 2013) (quoting DePuy Spine, Inc. v. Medtronic Sofamor Danek, Inc., 567 F.3d 1314, 1327 (Fed.Cir.2009)). “A reference does not teach away, however, if it merely expresses a general preference for an alternative invention but does not criticize, discredit, or otherwise discourage investigation into the invention claimed.” Id. Further, when conducting an obviousness analysis, the Board must consider a prior art reference “not only for what it expressly teaches, but also for what it fairly suggests.” Bradium Techs. LLC v. Iancu, 923 F.3d 1032, 1049 (Fed. Cir. 2019) (quoting In re Baird, 16 F.3d 380, 383 (Fed. Cir. 1994)). We are not convinced that the references before us “teach away” from performing the other transformations. In sum, we find for the reasons given that Petitioner has demonstrated by a preponderance of evidence that to a person of ordinary skill, Rosenberg alone or with Park teaches or suggests limitation 1[f].” slip op. at 44
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“shows by a preponderance of the evidence that limitations 1[c] and 1[e] are taught or suggested by Rosenberg and Park, in combination. Pet. 58–64; PO Resp. 39–40; Reply 19–20; Sur-reply 19. Petitioner persuades us that limitations 1[c] and 1[e], would have been obvious over Rosenberg and Park, in combination. Pet. 58–64; Reply 19–20. Patent Owner’s counter arguments are unavailing for multiple reasons. Patent Owner’s arguments fail because they improperly attack Rosenberg’s teachings individually, rather than addressing Petitioner’s combination of the references. PO Resp. 39–40; Sur-reply 19. This is fatal to Patent Owner’s arguments. In re Merck & Co., 800 F.2d 1091, 1097 (Fed. Cir. 1986). Moreover, Petitioner presents persuasive arguments and evidence that the references, in combination, teach limitations 1[c] and 1[e], including persuasive evidence that the references’ tilting, resizing, and zooming meet the claim limitations’ “adaptive transformation mapping . . . to generate modified images that appear to be captured from a different point of view” that “corresponds to an image taken from a different angle and a different distance.” Pet. 58–64 (citing Ex. 1001, 3:26–28; Ex. 1003 ¶¶ 65–67, 253–268; Ex. 1006 ¶¶ 26–28, 50, 52, 61, 75 ; Ex. 1011 ¶¶ 50–51, 59, Figs. 6A–6B, 7, 8, 14, 15; Ex. 1019, 16–20; Ex. 1021, 2:19–27, 17:19–24, 21:60, 23:65–24:9, 25:46–48, 30:4–11, Fig. 11); Reply 19–20 (citing Ex. 1003 ¶¶ 253–268; Ex. 1021, 17:17–23; Ex. 2012, 63:13–22, 111:13–21). Regarding tilting, after noting the ’110 patent’s disclosure (incorporated from the ’109 patent) of performing tilt transformations (Pet. 10–11), Petitioner advances persuasive evidence that Park discloses such a tilting transformation, thereby teaching the claimed “different angle” (id. at 61–63). Regarding resizing and zooming, citing extensive discussion in the ’110 patent (incorporated from the ’109 patent) of resizing and/or zooming to address the effects of varying distance between an object and a camera, Petitioner and Dr. Karam explain that the prior art’s zooming and resizing meet the claimed “different distance.” Pet. 63 (Ex. 1001, 3:26–28; Ex. 1021, 17:19–23, 21:57–60, 23:65–24:9, 25:46–48, 30:4–11, Fig. 11); Ex. 1003 ¶ 265 (citing Ex. 1001, 3:26–28; Ex. 1021, 17:19–23, 21:57–60, 23:65–24:9, 25:46–48, 30:4–11, Fig. 11). In its counterarguments, Patent Owner suggests that zooming and resizing do not account for “occlusion effects,” but Patent Owner does not persuasively tie this argument to the ’110 patent, failing to cite any portion of the ’110 patent that evinces its invention addresses such effects. PO Resp. 23–25, 39–40.” slip op. at 39
Patent outcomesUS 8,982,110 unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 8,982,110 - Apple Inc. v. Resonant Systems, Inc.All claims unpatentablePTAB · Oct 23, 2025 · IPR2024-00983 · APJ Norman H Beamer · IPR · Final written decision
Claims 1–6, 10, 17, 19, and 20 are unpatentable under § 103 over Alexander and Cosper; the alternative Gregorio-based grounds did not establish unpatentability.
RulingsFinal written decision- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for patent owner
“112(f). Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015). But if the term does not use the word “means,” then it is presumed not to be subject to Section 112(f). Id. “That presumption can be overcome, but only if the challenger demonstrates that the claim term fails to recite sufficiently definite structure or else recites function without reciting sufficient structure for performing that function.” Samsung Elecs. Am., Inc. v. Prisua Eng’g Corp., 948 F.3d 1342 (Fed. Cir. 2020). “The correct inquiry, when ‘means’ is absent from a limitation, is whether the limitation, read in light of the remaining claim language, specification, prosecution history, and relevant extrinsic evidence, has sufficiently definite structure to a person of ordinary skill in the art.” Apple Inc. v. Motorola, Inc., 757 F.3d 1286, 1298 (Fed. Cir. 2014).” slip op. at 12
- Prior constructionPrior construction adoptedDecided for patent owner
“both parties have asserted in the Apple Litigation that the “control component” requirement is a means-plus-function limitation subject to 35 U.S.C. §112(f), despite the fact that the control component limitation does not recite “means for.” Pet. 3 (citing Ex. 1012, 3–8; Ex. 1013, 13); PO Resp. 6–7. Indeed, the court in the Apple Litigation has concluded that the control component requirement is subject to 35 U.S.C. § 112(f), and has construed that requirement accordingly: Function: receiving control signals input to the oscillating resonant module; receiving outputs from the one or more sensors; controlling oscillation of the mass to produce a vibration response according to the received control signals by generating, using one or more of the received sensor outputs, control outputs to an actuator that drives the mass to oscillate. Structure: a microcontroller, a processor, a microprocessor, or a CPU that performs the algorithm shown in Figure 45 or the algorithm described in the corresponding text. See, e.g., 31:19–32:13, and equivalents thereof. Ex. 2001, 10; Ex. 2002, 40. Because of the Apple Litigation record, Petitioner presents its challenges in the alternative, first applying a plain meaning approach to the control component requirement, and also analyzing the requirement under the construction adopted in the Apple Litigation. Pet. 3–5. We adopt the court’s construction in the Apple Litigation. 35 U.S.C.” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) “would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of vibration-generating systems; additional years of experience could substitute for the advanced-level degree.” Ex. 1003 ¶ 27. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 2. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’882 patent specification.” slip op. at 9
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“(1) Analogous Art Our reviewing court has stated that “[t]wo separate tests define the scope of analogous prior art: (1) whether the art is from the same field of endeavor, regardless of the problem addressed and, (2) if the reference is not within the field of the inventor's endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (citations and internal quotes omitted). While these two criteria are helpful in many instances, we must not lose sight of the key question at hand: what is “prior art” as that term is used in 35 U.S.C. § 103(a)? References that are “too remote to be treated as ‘prior art’” are excluded from the obviousness analysis. In re Sovish, 769 F.2d 738, 741, 226 (Fed. Cir. 1985). The non-analogous art test provides helpful insight on the underlying question of what is “prior art” within the meaning of the statute; we should not, however, be blind to the reality of the circumstances of the case before us. In re Wood, 599 F.2d 1032, 1036 (CCPA (1979). Nor should we adhere to rigid and mandatory formulas that overly limit the inquiry. KSR Int’l Co., 550 U.S. at 419.” slip op. at 22
Patent outcomesUS 11,152,882 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,152,882
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.