- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting v. Cao Lighting, Inc.Some claims unpatentablePTAB · Sep 28, 2023 · IPR2022-00848 · APJ Brian D Range · IPR · Final written decision
Claims 21, 22, 25, 26, 28–30, 32–36, 40, 42–44, 47–49, 52, 53, 56–59, 62, 63, 65–68, 71–73, 77, 78, 81, 82, 85, 86, and 88–91 are unpatentable under § 103; claim 41 is not shown …
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“declaration addresses the Patent Owner Response and is relevant to the issues at hand. We start with an important observation: claim 18 (the only independent claim at issue) is an apparatus claim; the claim is directed to a “semiconductor light source.” Ex. 1001, 9:52, EPRC 1:32. One requirement of this apparatus is that it comprise “a semiconductor chip” (id. at 9:66) where “said semiconductor chip is a light emitting diode (LED) chip EPRC, 1:34–36. As we explain when addressing claim construction, infra, we adopt Patent Owner’s proposed construction (Resp. 14) of “said semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as referring to “a semiconductor LED chip capable of emitting light greater than about 40 milliwatts.” See Section III.D, infra (emphasis added). Because of these recitations, Petitioner bears the burden of establishing that the prior art teaches or suggests a semiconductor LED chip “capable of emitting light greater than about 40 milliwatts.” As explained herein, we determine that in the Petition, Petitioner met this burden by establishing by a preponderance of the evidence that the Krames reference teaches an LED chip that has this capability. Pet. 53 (quoting Ex. 1008, 10). Notably, claim 18 does not require actual operation of anything at greater than 40 milliwatts because claim 21 is not a method claim. Petitioner never had a burden of establishing a method of running the Krames reference’s LED at this power output within a semiconductor light source.” slip op. at 9
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’770 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 16. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’770 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 15
- Prior constructionPrior construction adoptedTerm construed patent owner constructionDecided for patent owner
“Delaware held, with respect to related U.S. Patent 6,465,961, construed “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as “at least one LED chip is capable of emitting light greater than about 40 milliwatts.” Resp. 14 (citing Ex. 1024, 15–18). Petitioner responds that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1. We note that the language of claim 18 does not precisely match the language the District Court considered, it is substantively the same. The record supports a construction very similar to the construction the District Court adopts, and we reference the District Court’s reasoning. Ex. 1024, 15– 18. We, thus, construe claim 18’s recitation that “said semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as referring to “a semiconductor LED chip that is capable of emitting light greater than about 40 milliwatts.” It is unnecessary to construe any other claim terms in this Decision because none of the parties’ disputes turn on the meaning of other terms. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017).” slip op. at 17
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedReference is prior artDecided for petitioner
“The facts above are evidence of the Krames reference’s publication as of June 29, 2000, because the facts tend to make the Krames reference’s publication as of June 29, 2000, more probable than it would be without the evidence. See Fed. R. Evid. 401(a) (defining evidence as relevant “if it has any tendency to make a fact more or less probable than it would be without the evidence”). The evidence is sufficient to support publication. Meanwhile, no evidence of record suggests that Krames was not a printed publication as of June 29, 2000. Thus, a preponderance of the evidence supports Krames’s prior art status. Patent Owner argues that Ms. Watters “never establishes a firm date when Krames was purportedly available to the relevant public.” Resp. 21. Patent Owner bases this argument by taking a tortured reading of Ms. Watters’s statement that “[m]embers of the interested public could locate a copy of [the Proceedings] on or after June 29, 2000, the date it was catalogued.” Id. (quoting Ex. 1020, 3); see also Sur-Reply 12–13. The best understanding of Ms. Watters’s statement, in view of the context of Ms. Watters explaining the library’s cataloguing process, is that a member of the interested public had two options: the person could choose to locate the Proceedings on June 29, 2000, or the person could choose to locate the Proceedings after June 29, 2000. Thus, the statement supports public availability as of June 29, 2000.” slip op. at 21
Patent outcomesUS 6,634,770 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSRPatents in suitUS 6,634,770 - Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting et al. v. Cao Lighting, Inc.Some claims unpatentablePTAB · Sep 28, 2023 · IPR2023-00129 · APJ Brian D Range · IPR · Final written decision
Claims 21–40, 42–44, 47–49, 52–53, 56–59, 62–63, 65–68, 71–73, 77–78, 81–82, 85–86, and 88–91 are unpatentable over Begemann, Krames, and Allen; claim 41 is not shown unpatentable.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“In the Reply, Petitioner uses the Krames declaration (Ex. 1028) to argue, for example, that a person of ordinary skill in the art would have used a lower amperage than the 1.5 A dc that Patent Owner’s Response focuses on. Reply 8 (citing Ex. 1028 ¶ 22). This use of the Krames declaration is timely because it responds to an argument Patent Owner makes in the Patent Owner Response. 37 C.F.R. § 42.23(b) (“A reply may only respond to arguments raised in . . . patent owner response.”). As to relevancy and whether the Krames declaration is applicable to the facts of this case, the issues at hand are (1) whether or not a person having ordinary skill would have had reason to use the Krames LED with Begemann with a reasonable expectation of success and (2) whether or not the Krames LED is capable of outputting light at greater than about 40 milliwatts. Again, we emphasize that claim 21 does not recite a method where the LED within the recited semiconductor light source actually outputs greater than about 40 milliwatts. The Krames declaration is relevant to the facts of this case because the declaration has bearing on whether or not a person of ordinary skill in the art would have combined the Krames reference’s LED with Begemann’s lightbulb design. See, e.g., Ex. 1028 ¶ 22. Patent Owner argues that evidence must be relevant to motivation to combine “an LED chip from the Krames article (operating at 1.5 amps to produce 170 milliwatts of output)” but claim 21 has no “operating at 1.5 amps to produce 170 milliwatts of output” requirement. What is relevant is that Krames discloses a single chip that has the capability of outputting more or less light depending on operating conditions. Pet. Opp. 3; see also Ex. 1008, 8 (providing that Figure 12 of the Krames reference is described as illustrating “[l]ight output vs. current characteristic of a blue … 1x1 mm2 AlGaInN LED in a power package, compared to a conventional AlGaInN LED in a 5 mm lamp a package”). Because claim 21 does not require actually running the recited LED at any particular wattage or amperage, it is appropriate for the Krames declaration to rebut Patent Owner’s argument that a person of ordinary skill would not have considered using the Krames LED with Begemann at high amperage by explaining that a person of ordinary skill in the art would have considered using the exact same Krames LED with Begemann at a low amperage instead and that at this lower amperage the Krames LED would generate an amount of heat that would be easily dissipated by Begemann’s lamp while still providing an optical output of “greater than about 40 milliwatts” as recited by claim 21. Ex. 1028 ¶¶ 23–24 (citing Ex. 1008, 8). The fact that the Krames LED is configured to run at the high amperage if desired for a different application does not negate the rationale for combining the Krames LED to run at a lower amperage.” slip op. at 14
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’961 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 19. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in the art would need to be “familiar with thermal issues.” Ex. 2015, 26:15– 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’961 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“particularly relevant.” Resp. 14–15. First, Patent Owner argues that “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” means “at least one LED chip is capable of emitting light greater 9 Petitioner states that “Patent Owner thus contends the recited ‘reflective layers’ can include transparent or semi-transparent layers that exhibit some reflectivity (e.g., SiO2) or an interface between two layers (e.g., the buffer and substrate layers) that exhibit differing indices of refraction.” Pet. 20. Patent Owner frames this as being Petitioner’s “novel construction” (Resp. 16), but Petitioner does not expressly endorse this Patent Owner contention. than about 40 milliwatts.” Resp. 14–15. Patent Owner notes that a district court already adopted this construction and notes that the “LED chip” includes LEDs, LED modules, and LED arrays but excludes laser chips, laser modules, and VCSEL chips. Id. (citing Ex. 2003, 15–18). Petitioner argues that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1–2. We adopt Patent Owner’s proposed construction because it is well supported by the record including the District Court’s reasoning. Ex. 2003, 15–18. slip op. at 20
- Prior constructionPrior construction adoptedDecided for patent owner
“Patent Owner’s claim construction is well-supported by the record including the reasoning provided by the California and Delaware district courts. Ex. 2002, 19–21 (California district court explaining why the “reflective layers” must be distinct layers based on how claim 8 is structured and also explaining why the amount of reflection must be non-negligible); Ex. 2003, 2, 13 (Delaware district court explaining why reflection has to be more than negligible but need not reflect more light than the light absorbed or transmitted). We, thus, agree that “first and a second reflective layers . . . 10 Patent Owner’s proposed claim construction combines various statements made by the district courts into one statement. Resp. 15 (citing Ex. 2002, 19–21; Ex. 2003, 2, 13). serving to reflect light emitted by said active layer” means that the “first and second reflective layers are distinct from each other and reflect more than negligible light.” We further note that the preponderance of the evidence supports that as little as one percent light reflectance is “non-negligible” in this context. Reply 4; also Ex. 1032, 188:7–14 (Patent Owner’s witness, Dr. Shealy, testifying that reflection “on the order of one percent” would be more than negligible); see also Tr. 53 (counsel for Patent Owner agreeing that Dr. Shealy opined that “three percent reflection is enough to be non-negligible”).” slip op. at 21
Patent outcomesUS 6,465,961 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 6,465,961 - Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting et al. v. Cao Lighting, Inc.Some claims unpatentablePTAB · Sep 28, 2023 · IPR2023-00123 · APJ Brian D Range · IPR · Final written decision
Claims 21–40, 42–44, 47–49, 52–53, 56–59, 62–63, 65–68, 71–73, 77–78, 81–82, and 85–91 are unpatentable over Begemann, Krames, and Allen; claim 41 was not shown unpatentable.
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“declaration addresses the Patent Owner Response and is relevant to the issues at hand. We start with an important observation: claim 21 (the only independent claim at issue) is an apparatus claim; the claim is directed to a “semiconductor light source.” Ex. 1001, 9:52. One requirement of this apparatus is that it comprise “at least one semiconductor chip” (id. at 10:1) where the “at least one semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts.” Id. at EPRC, 1:34–36. As we explain when addressing claim construction, infra, we adopt Patent Owner’s proposed construction of “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as meaning “at least one LED chip is capable of emitting light greater than about 40 milliwatts.” See Section III.D, infra (emphasis added). Because of these recitations, Petitioner bears the burden of establishing that the prior art teaches or suggests a semiconductor chip “capable of emitting light greater than about 40 milliwatts.” As explained herein, we determine that in the Petition, Petitioner met this burden by establishing by a preponderance of the evidence that the Krames reference teaches an LED chip that has this capability. Pet. 54 (quoting Ex. 1008, 10). Notably, claim 21 does not require actual operation of anything at greater than 40 milliwatts because claim 21 is not a method claim. Petitioner never had a burden of establishing a method of running the Krames reference’s LED at this power output within a semiconductor light source.” slip op. at 12
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’961 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 19. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in the art would need to be “familiar with thermal issues.” Ex. 2015, 26:15– 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’961 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 19
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed patent owner constructionDecided for patent owner
“particularly relevant.” Resp. 14–15. First, Patent Owner argues that “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” means “at least one LED chip is capable of emitting light greater 9 Petitioner states that “Patent Owner thus contends the recited ‘reflective layers’ can include transparent or semi-transparent layers that exhibit some reflectivity (e.g., SiO2) or an interface between two layers (e.g., the buffer and substrate layers) that exhibit differing indices of refraction.” Pet. 20. Patent Owner frames this as being Petitioner’s “novel construction” (Resp. 16), but Petitioner does not expressly endorse this Patent Owner contention. than about 40 milliwatts.” Resp. 14–15. Patent Owner notes that a district court already adopted this construction and notes that the “LED chip” includes LEDs, LED modules, and LED arrays but excludes laser chips, laser modules, and VCSEL chips. Id. (citing Ex. 2003, 15–18). Petitioner argues that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1–2. We adopt Patent Owner’s proposed construction because it is well supported by the record including the District Court’s reasoning. Ex. 2003, 15–18. slip op. at 20
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner
“The facts above are evidence of the Krames reference’s publication as of June 29, 2000, because the facts tend to make the Krames reference’s publication as of June 29, 2000, more probable than it would be without the facts. See Fed. R. Evid. 401(a) (defining evidence as relevant “if it has any tendency to make a fact more or less probable than it would be without the 13 We note that Dr. Lebby does not directly state when the Proceedings were widely available. See Sur-Reply 14. evidence”). The evidence is sufficient to support publication. Meanwhile, no evidence of record suggests that Krames was not a printed publication as of June 29, 2000. Thus, a preponderance of the evidence supports Krames’s prior art status. Patent Owner argues that Ms. Watters “never establishes a firm date when Krames was purportedly available to the relevant public.” Resp. 25. Patent Owner bases this argument by taking a tortured reading of Ms. Watters’s statement that “[m]embers of the interested public could locate a copy of [the Proceedings] on or after June 29, 2000, the date it was catalogued.” Id. (quoting Ex. 1020, 3); see also Sur-Reply 13–14. The best understanding of Ms. Watters’s statement, in view of the context of Ms. Watters explaining the library’s cataloguing process, is that a member of the interested public had two options: the person could choose to locate the Proceedings on June 29, 2000, or the person could choose to locate the Proceedings after June 29, 2000. Thus, the statement supports public availability as of June 29, 2000.” slip op. at 25
Patent outcomesUS 6,465,961 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 6,465,961 - Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting et al. v. Cao Lighting, Inc.Some claims unpatentablePTAB · Sep 28, 2023 · IPR2022-00847 · APJ Brian D Range · IPR · Final written decision
Claims 21, 22, 25, 26, 28–30, 32–36, 40, 42–44, 47–49, 52, 53, 56–59, 62, 63, 65–68, 71–73, 77, 78, 81, 82, 85, 86, and 88–91 are unpatentable over Begemann, Krames, and Allen; claim 41 is …
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“Patent Owner’s argument is unpersuasive because the Krames declaration addresses the Patent Owner Response and is relevant to the issues at hand. We start with an important observation: claim 21 (the only independent claim at issue) is an apparatus claim; the claim is directed to a “semiconductor light source.” Ex. 1001, 9:52. One requirement of this apparatus is that it comprise “at least one semiconductor chip” (id. at 10:1) where the “at least one semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts.” Id. at EPRC, 1:34–36. As we explain when addressing claim construction, infra, we adopt Patent Owner’s proposed construction of “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as meaning “at least one LED chip is capable of emitting light greater than about 40 milliwatts.” See Section III.D, infra (emphasis added). Because of these recitations, Petitioner bears the burden of establishing that the prior art teaches or suggests a semiconductor chip “capable of emitting light greater than about 40 milliwatts.” As explained herein, we determine that in the Petition, Petitioner met this burden by establishing by a preponderance of the evidence that the Krames reference teaches an LED chip that has this capability. Pet. 54 (quoting Ex. 1008, 10). Notably, claim 21 does not require actual operation of anything at greater than 40 milliwatts because claim 21 is not a method claim. Petitioner never had a burden of establishing a method of running the Krames reference’s LED at this power output within a semiconductor light source.” slip op. at 12
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’961 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 19. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in the art would need to be “familiar with thermal issues.” Ex. 2015, 26:15– 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’961 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“particularly relevant.” Resp. 14–15. First, Patent Owner argues that “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” means “at least one LED chip is capable of emitting light greater 9 Petitioner states that “Patent Owner thus contends the recited ‘reflective layers’ can include transparent or semi-transparent layers that exhibit some reflectivity (e.g., SiO2) or an interface between two layers (e.g., the buffer and substrate layers) that exhibit differing indices of refraction.” Pet. 20. Patent Owner frames this as being Petitioner’s “novel construction” (Resp. 16), but Petitioner does not expressly endorse this Patent Owner contention. than about 40 milliwatts.” Resp. 14–15. Patent Owner notes that a district court already adopted this construction and notes that the “LED chip” includes LEDs, LED modules, and LED arrays but excludes laser chips, laser modules, and VCSEL chips. Id. (citing Ex. 2003, 15–18). Petitioner argues that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1–2. We adopt Patent Owner’s proposed construction because it is well supported by the record including the District Court’s reasoning. Ex. 2003, 15–18. slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“It is unnecessary to construe any other claim terms in this Decision because none of the parties’ disputes turn on the meaning of other claim terms. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017).” slip op. at 22
Patent outcomesUS 6,465,961 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 6,465,961 - Athena Automation Ltd. v. Husky Injection Molding Systems Ltd.Some claims unpatentablePTAB · Oct 23, 2014 · IPR2013-00290 · APJ Jennifer S Bisk · IPR · Final written decision
Claims 1, 4–16, and 20–22 are unpatentable as anticipated by Arend; claims 2, 3, 17, and 19 were not shown unpatentable, and the motion to amend was denied.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“We agree with Petitioner. We are not persuaded that the ’536 patent limits the required movement of the “rod that is movable” to axial movement of the entire rod. For its proposed construction, Patent Owner relies on figures and description from the ’536 patent that are explicitly described as exemplary embodiment or embodiments. PO Resp. 21 (citing Ex. 1001, Fig. 6C, 7B, 8B, 12:59–64); PO Resp. 26 (citing Ex. 1001, Fig. 7A, 10:26–30, 13:30–37). The ’536 patent, however, clearly identifies Figure 7A (and the rest of the figures), as well as the corresponding description, as exemplary embodiments of the invention, stating explicitly that “[r]eference herein to details of the illustrated embodiments is not intended to limit the scope of the claims.” Ex. 1001, 16:4–8; see also 7:20–25. The testimony of Patent Owner’s declarant, George Markus, is based on these same portions of the ’536 patent that describe exemplary embodiments. Ex. 2009 ¶¶ 34–38. Patent Owner does not, however, point us to any language of the ’536 patent that evidences a clear intention to limit the claims to an exemplary embodiment. Thus, we are not persuaded that the language in the specification pointed to by Patent Owner limits the scope of the term at issue here. See, e.g. Phillips, 415 F.3d at 1323 (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”); DSW v. Shoe Pavilion, 537 F.3d 1342, 1348 (Fed. Cir. 2008) (“[W]hen claim language is broader than the preferred embodiment, it is well-settled that claims are not to be confined to that embodiment.”).” slip op. at 17
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed petitioner constructionDisclaimer not foundDecided for petitioner
“We agree with Petitioner that Patent Owner’s proposed modifications improperly limit the claim terms. See Reply 6–9. Petitioner asserts, and we agree, that while the patent discloses that it is preferable to engage the lock member teeth in a lower flex zone, it does not restrict the invention to that situation. Id. at 7. For example, Mr. Markus admits that there is some benefit of reduced wear even if only some, but not all, of the teeth of the lock members engage in the relatively lower flex zone. Id. (citing deposition testimony of Patent Owner’s expert, Mr. Markus, Ex. 1011, 219:14–22, 222:2–12; 224:7–11, 225:12–25). Thus, a broader interpretation of the term “relatively higher flex zone” is also consistent with the ’536 patent’s stated objection to reduce wear. Even more telling, the ’536 patent itself states, in its description of an exemplary embodiment, “the complementary lock member 512 is lockably engaged with the lock member 510 at a position that is proximate, at least in part, to the zone 514.” Ex. 1001, 14:11–16 (emphasis added). We, therefore, are not persuaded that the ’536 patent “specifically disavows” engagement outside the relatively higher flex zone, as asserted by Patent Owner. See PO Resp. 36–37. To the contrary, we are persuaded that the ’536 patent explicitly contemplates that the teeth may, at least in part, not engage within the relatively higher flex zone. We also agree with Petitioner that the claim language does not require comparison of adjacent flex zones. Id. (citing Ex. 1011, 227:10–24, 230:10–231:3). While the word adjacent is recited in the claims (e.g., “the relatively lower flex zone of the platen being a portion of the platen adjacent to the rod”) it refers to a flex zone being adjacent the rod, not another flex zone. See Ex. 1011, 227:10–24. Patent Owner’s reliance on Figure 8D as supporting the proposed restriction does not persuade us otherwise. As discussed above, Figure 8D describes an exemplary embodiment, and Patent Owner does not point to any language indicating that the claims should be limited to this embodiment. We also are not persuaded by Patent Owner’s unexplained and unsupported statement that “[o]nly by comparing zones that are adjacent, can such location of the engagement [in the lower flex zone] be accurately pinpointed.” PO Resp. 38 (citing Ex. 2009 ¶¶ 45–47).5” slip op. at 22
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“member is engagable with the lock member within a relatively lower flex zone of the platen” (“the engagement limitation”).6 In the Decision to Institute, we adopted a broadest reasonable construction of this term encompassing the situation in which the complementary lock member and the lock member are capable of interlocking or meshing at least in part within or proximate to a relatively lower flex zone of the platen. Dec. to Inst. 10–12. Neither party explicitly addresses the broadest reasonable determine which is the relatively high flex zone and which is the relatively low flex zone.”). The other cited paragraphs are not related to the statement they are cited to support. See id. ¶¶ 46–47. Nor could we find, upon review of the complete declaration, any other support for Patent Owner’s assertion. 6 Independent claims 1 and 12 recite this limitation as quoted. Independent claim 18 includes a similar limitation, “engaging a lock member associated with the rod with a complementary lock member associated with the platen at a position located proximate to a relatively lower flex zone of the platen.” construction of this claim term in their post-institution briefing. We conclude that no additional construction of the term is necessary.” slip op. at 24
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“reference—in order to anticipate under 35 U.S.C. § 102—must not only disclose all elements of the claim within the four corners of the document, but must also disclose those elements arranged as in the claim.” Net MoneyIN, Inc. v. VeriSign, Inc., 545 F.3d 1359, 1369 (Fed. Cir. 2008) (internal quotation marks omitted). Accordingly, an anticipatory reference must show all of the limitations of the claims “arranged or combined in the same way as recited in the claims.” Id. at 1370; see Finisar Corp. v DirecTV Group, Inc., 523 F.3d 1323, 1334–37 (Fed. Cir. 2008); Ecolochem, Inc. v. Southern California Edison Co., 227 F.3d 1361 (Fed. Cir. 2000). Petitioner asserts that Choi’s teeth 38 correspond to the claimed lock member, teeth 48 correspond to the claimed complementary lock member, and tie bar 20 corresponds to the claimed rod. Pet. 36. In addition, according to Petitioner, Choi’s securing/clamping assembly 22 corresponds to the claimed clamp assembly. Id. Petitioner reasons that these elements of Choi are part of the machine disclosed in Glaesener because of the following sentence: “The tie-bar nuts can be secured to the rear wall 16 by any appropriate mechanism, such as the pineapple and toothed-ring mechanism described in [Choi].” Pet. 25, 36. Petitioner, however, does not explain how the relied upon elements of Choi’s device secure the tie-bar nuts of Glaesener to rear wall 16 of Glaesener’s platen. In fact, Petitioner does not direct us to any disclosure in Choi of tie-bar nuts or their equivalent. See Pet. 32–41. Moreover, there is no dispute that Choi does not use the term “pineapple and toothed-ring mechanism.” Tr. 16:7–10. And Petitioner does not provide persuasive evidence as to what part of Choi is included in the term “pineapple and toothed-ring mechanism.” See Tr. 16:7–12 (arguing for the first time that what “pineapple and tooth mechanism” in Glaesener refers to is Figure 3A in Choi with no reference to the record); Tr. 60:14–22 (explaining that Petitioner does not provide evidence of what the pineapple and toothed-ring mechanism is). Without such explanation and supporting evidence, we are not persuaded that Petitioner has met its burden to show that the various portions of Choi and Glaesener, on which it relies, are combined in the same way as recited in the challenged claims. See Lindemann Maschinenfabrik GMBH v. American Hoist & Derrick Co., 730 F.2d 1452, 1458 (Fed. Cir. 1984) (holding that although the prior art reference could be said to contain all of the elements of the claimed invention, it did not anticipate under 35 U.S.C. § 102 because it “disclose[d] an entirely different device, composed of parts distinct from those of the claimed invention, and operating in a different way to process different material differently.”). The Federal Circuit has expressly warned against treating patent “claims as mere catalogs of separate parts” without regard for the “part-to-part relationships set forth” therein. NetMoneyIN, 545 F.3d at 1370 (quoting Lindemann, 730 F.2d at 1459).” slip op. at 30
Patent outcomesUS 7,670,536 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites PhillipsPatents in suitUS 7,670,536
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.