• Anthony Inc. v. Controltec, LLCAll claims unpatentable
  PTAB · Sep 30, 2026 · IPR2025-00636 · APJ Barry L Grossman · IPR · Final written decision

  Claims 1–20 are unpatentable as obvious: claims 8–12 over Carter; claims 1–20 over Carter and Bunch; claims 3, 9, 10, and 19 over Carter, Bunch, and King; and claims 2, 11–13, and 17 over Carter, …

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “testimony that we limit the level of ordinary skill to “refrigerated display cases.” Limiting the level of skill to an engineer with experience “working with refrigerated display cases” does not relate to the technology disclosed, and the invention claimed, in the ’847 patent, which is controlling condensation and conserving energy. E.g., Ex. 1001, 2:23–27 (“The invention is proactive in preventing condensation from forming by activating frame/door heaters before the dew point temperature at frame and door surfaces is reached. Power is then cycled off at a set point above dew point to save energy.” (emphases added)). An electrical engineer with a bachelor’s degree and 2 years of experience focused on lighting systems for refrigerated display cases would have “experience working with refrigerated display cases,” and thus meet Patent Owner’s proposed level of skill. Such a person, however, would not be experienced in controlling condensation, dew point sensor positioning, and condensation algorithm design, which is the focus of the disclosed and claimed invention, and which Mr. Pollock states “materially affect performance, energy use, and reliability” in controlling condensation in a refrigerated display case. Ex. 2037 ¶ 10. We also note that Mr. Pollock’s qualifications include a “B.S. in Mechanical Engineering, . . . with focus on thermal and mechanical systems, thermodynamics, and HVAC&R (Heating, Ventilation, Air Conditioning & Refrigeration).” Ex. 2037 ¶ 3. His academic focus is consistent with our determination of the level of ordinary skill. Accordingly, based on the prior art, the sophistication of the disclosed technology in the ’847 patent, finding Mr. Pollock’s testimony on this issue too general, and crediting Dr. Henze’s testimony with substantial probative weight, we adopt Petitioner’s definition of the level of ordinary skill. We” slip op. at 19

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Accordingly, based on the prior art, the sophistication of the disclosed technology in the ’847 patent, finding Mr. Pollock’s testimony on this issue too general, and crediting Dr. Henze’s testimony with substantial probative weight, we adopt Petitioner’s definition of the level of ordinary skill. We more experience will offset less academic training, as did Dr. Henze (Ex. 1003 ¶ 31). Thus, in this proceeding a person of ordinary skill would have a bachelor’s degree in mechanical engineering, electrical engineering, or a comparable field and at least three to five years of professional experience working with heating, ventilating, air conditioning, and refrigeration (HVAC&R) systems, and that more academic training will offset less experience, and more experience will offset less academic training. 2. Dr. Henze Is a Person of Ordinary Skill Patent Owner asserts that Dr. Henze is not a person of ordinary skill and thus is not qualified to provide expert testimony in this proceeding. PO Resp. 18–21 (citing Kyocera Senco Indus. Tools Inc. v. Int’l Trade Comm’n, 22 F.4th 1369, 1377 (Fed. Cir. 2022). Patent Owner’s argument requires a level of ordinary skill based on “working with refrigerated display cases,” which we have not adopted. PO Resp. 27. Based on the level of skill adopted in the previous section, we determine that Dr. Henze is qualified to provide expert testimony in this proceeding C. Claim Construction We construe each claim “using the same claim construction standard” slip op. at 19

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notNot reached

    “[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Whether the preamble is or is not limiting is not necessary to resolve this controversy because it would not affect the outcome of this case. We also note that it is beyond reasonable dispute that Bunch, applied with Carter against all the challenged claims, discloses display cases with glass doors. Ex. 1006, 1:14–16. Bunch also discloses that, in the display cases, “[t]o combat condensation and frost, heaters are installed in refrigerator doors and frames, which raise the temperature of the door or frame sufficiently to eliminate condensation.” Id. at 1:24–26. slip op. at 22

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “A reference qualifies as prior art for an obviousness determination only when it is analogous to the claimed invention. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“References within the statutory terms of 35 U.S.C. § 102 qualify as prior art for an obviousness determination only when analogous to the claimed invention.” (citing In re Clay, 966 F.2d 656, 658 (Fed. Cir. 1992))). The Federal Circuit has laid out two separate tests to determine whether a reference is analogous art to the claimed invention, i.e., whether reference. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004). These two tests are: “(1) whether the art is from the same field of [the inventor’s] endeavor” and “(2) if the reference is not within the field of the inventor’s endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” Id.; see also Netflix, Inc. v. DivX, LLC, 80 F.4th 1352, 1359 (Fed. Cir. 2023) (“Importantly, ‘the scope of any field of endeavor will vary with the factual description of each invention.’ Unlike the reasonable-pertinence test, the field-of-endeavor test does not look to the problem that the patent purports to address. It is enough that the prior art reference falls within the relevant field of endeavor of the patent-in-suit.”) (citations omitted); Unwired Planet, LLC v. Google Inc., 841 F.3d 995, 1001 (Fed. Cir. 2016) (“To determine if art is analogous, we look to ‘the purposes of both the invention and the prior art.’ If a reference disclosure and the claimed invention have a same purpose, the reference relates to the same problem, which supports an obviousness rejection.” (citations omitted)); see also Nielsen Co. (US), LLC v. TVision Insights, Inc., 186 F.4th 1363, 1369–1370 (Fed. Cir. 2026) (providing a comprehensive summary and analysis of the applicable law concerning analogous art)” slip op. at 37

  Patent outcomesUS 7,421,847 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,421,847
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Anthony Inc. v. Controltec, LLCAll claims unpatentable
  PTAB · Aug 25, 2026 · IPR2025-00559 · APJ Barry L Grossman · IPR · Final written decision

  Claims 1–20 are unpatentable as obvious over the five asserted grounds based on Carter, Beatenbough, King, Gatling, and Kotani.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We find unpersuasive Mr. Pollock’s testimony that we limit the level of ordinary skill to “refrigerated display cases” because defining the level of skill as an engineer with experience “working with refrigerated display cases” does not relate to the technology disclosed and claimed in the ’181 patent, which is controlling condensation and conserving energy. E.g., Ex. 1001, 2:17–21 (“The invention is proactive in preventing condensation temperature at frame and door surfaces is reached. Power is then cycled off at a set point above dew point to save energy.” (emphases added)). An electrical engineer with a bachelor’s degree and 2 years of experience focused on lighting systems for refrigerated display cases would have “experience working with refrigerated display cases,” and thus meet Patent Owner’s proposed level of skill. Such a person, however, would not be experienced in controlling condensation, dew point sensor positioning, and condensation algorithm design, which is the focus of the disclosed and claimed invention, and which Mr. Pollock states “materially affect performance, energy use, and reliability” in controlling condensation in a refrigerated display case. Ex. 2014 ¶ 11. We also note that Mr. Pollock’s qualifications are a “B.S. in Mechanical Engineering, cum laude, from Drexel University (1998), with focus on thermal and mechanical systems, thermodynamics, and HVAC&R (Heating, Ventilation, Air Conditioning & Refrigeration).” Ex. 2014 ¶ 3. Accordingly, based on the prior art, the sophistication of the disclosed technology in the ’181 patent, finding Mr. Pollock’s testimony on this issue too general, and crediting Dr. Henze’s testimony with substantial probative weight, we adopt Petitioner’s definition of the level of ordinary skill. We modify it to state that more academic training will offset less experience, and more experience will offset less academic training, as did Dr. Henze (Ex. 1003 ¶ 31). Thus, in this proceeding a person of ordinary skill would have a bachelor’s degree in mechanical engineering, electrical engineering, or a comparable field and at least three to five years of professional experience working with heating, ventilating, air conditioning, and refrigeration” slip op. at 16

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “The fundamental role of expert testimony is that “the expert’s scientific, technical, or other specialized knowledge will help the trier of fact [here, the Board] to understand the evidence or to determine a fact in issue.” Fed. R. Evid. 702(a). The testimony must be “based on sufficient facts or data” (id. at 702(b)); must be “the product of reliable principles and methods” (id. at 702(c)); and must reflect “a reliable application of the principles and methods to the facts of the case” (id. at 702(d)). We determine, based on the record before us, that Dr. Henze’s Declaration testimony meets these requirements. He provides, as required, the facts and data to support his testimony. Indeed, Federal Rule of Evidence 702 and the Code of Federal Regulations require him to do so. See 37 C.F.R. § 42.65(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Expert testimony that “merely repeats, verbatim, the conclusory assertion for which it is offered to support,” or that “does not cite to any additional supporting evidence or provide any technical reasoning to support” the testimony is entitled to little weight. Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9, 15 (PTAB Aug. 24, 2022) (Precedential) (emphasis added).” slip op. at 31

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’” Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Here, whether the preamble is or is not limiting is not argued by Petitioner. Moreover, whether the preamble is or is not limiting is not necessary to resolve this controversy because it would not affect the outcome of this case. 2. “Adapted for” Patent Owner asserts that the term “adapted for” in independent claims 1 and 8 has its “plain and ordinary meaning.” Id. at 14. Patent Owner does not, however, provide us with a specific identification of what is the “plain and ordinary” meaning. Petitioner does not address a specific construction for this term. Thus, it is not in controversy and we need not specifically construe this term. slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artDecided for petitioner

    “only when it is analogous to the claimed invention. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“References within the statutory terms of 35 U.S.C. § 102 qualify as prior art for an obviousness determination only when analogous to the claimed invention.” (citing In re Clay, 966 F.2d 656, 658 (Fed. Cir. 1992))). The Federal Circuit has laid out two separate tests to determine whether a reference is analogous art to the claimed invention, i.e., whether one of ordinary skill in the art would even look to the teachings of that reference. In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004). These two tests are: “(1) whether the art is from the same field of [the inventor’s] endeavor” and “(2) if the reference is not within the field of the inventor’s endeavor, whether the reference still is reasonably pertinent to the particular problem with which the inventor is involved.” Id.; see also Netflix, Inc. v. DivX, LLC, 80 F.4th 1352, 1359 (Fed. Cir. 2023) (“Importantly, ‘the scope of any field of endeavor will vary with the factual description of each invention.’ Unlike the reasonable-pertinence test, the field-of-endeavor test does not look to the problem that the patent purports to address. It is enough that the prior art reference falls within the relevant field of endeavor of the patent-in-suit.”) (citations omitted); Unwired Planet, LLC v. Google Inc., 841 F.3d 995, 1001 (Fed. Cir. 2016) (“To determine if art is analogous, we look to ‘the purposes of both the invention and the prior art.’ If a reference disclosure and the claimed invention have a same purpose, the reference” slip op. at 42

  Patent outcomesUS 7,207,181 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,207,181
• Tesla, Inc. v. Intellectual Ventures II LLCSome claims unpatentable
  PTAB · Jul 1, 2026 · IPR2025-00222 · APJ Frederick C Laney · IPR · Final written decision

  Claims 1, 2, 4, 5, 8–11, 13, and 14 are unpatentable over Yu and Miyazaki; claims 15, 16, and 19 were not shown unpatentable over Matsushima.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “at, and before, the earliest claimed priority date of the ’158 patent . . . would have had a bachelor’s degree in electrical engineering, computer engineering, computer science, or a related field and 2–3 years of experience in digital imaging systems,” adding that “[l]ess experience may be sufficient with additional education, and likewise, less education may be sufficient with additional work experience.” Pet. 6–7 (citing Ex. 1003 ¶¶ 16–18). Patent Owner does not offer a competing definition or dispute Petitioner's articulation. Based on the entire record, we adopt Petitioner’s characterization of the level of skill for one of ordinary skill in the art because that characterization, we find, is consistent with the ’158 patent and the asserted prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “We determine that the claims require a per-channel determination of integration time—that is, an integration time arrived at for each sensor or channel individually—and cannot be satisfied by a single global value merely applied uniformly across the sensors. We do not, however, read the independent claims to require that the per-channel integration times differ from one another.” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed board ownDecided for patent owner

    “We adopt the definition clearly and unambiguously set forth in the specification, which was likewise adopted by the Court in the related litigation. See Pet. 7–8, 55; Pet. Reply 1–2 (district court construing the term to mean “the time the image sensor collects and integrates signal from the scene”). The specification states that the integrated photo-charge “is directly related to the time the image sensor collects and integrates signal from the scene,” and that “[t]his is known as integration time.” Ex. 1001, 4:4–7. Accordingly, the ’158 patent demonstrates that the inventors indisputably acted as a lexicographer for the term “integration time.”” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “We construe “during a frame” to mean the period during which data for a single frame of an image is captured. The limitation is satisfied where the per-channel integration time is effectuated during the frame; it does not require that the integration time be re-determined mid-frame, nor does it require actuation of a “charge integration switch.” The specification’s only use of the phrase confirms this reading: “each camera channel is controlled during a frame under an independent integration time.” Ex. 1001, 3:45–50. Consistent with that usage, the specification describes selecting an integration time for each channel and then integrating the photo-signal “within a single frame of data,” and describes placing the charge-integration switch in a state to allow charge to accumulate for the selected period and then transferring the accumulated charge upon completion of the integration period. Id. at 4:51–54, 11:3–18. We decline Patent Owner’s proposal to require in-frame actuation of a charge-integration switch, for the same reason we decline to import that structure into “integration time.” We also decline to read the phrase to require mid-frame re-determination of the integration time, because the patent’s own embodiment selects an integration time and then integrates charge during the frame under that selected time. Ex. 1001, 4:51–54, 11:3– 18. So construed, “during a frame” is not redundant of the independentclaim limitation: it adds that the per-channel control occurs within a single frame (intrascene), as distinct from adjustment from one frame to the next (interscene).” slip op. at 15

  Patent outcomesUS 9,232,158 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,232,158
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentable
  PTAB · Jan 16, 2026 · IPR2022-00572 · APJ Jeffrey S Smith · IPR · Remand

  Claims 1–4 and 6 are unpatentable under §103 because the prior-art combinations teach the limitations at issue under the Federal Circuit’s construction of “style.”

  RulingsRemand decision

  • RemandDecided for petitioner

    “We agree with Petitioner. Lemay Web discloses that the style settings of width, height, pause, and repeat for the pocket watch images can be changed by changing the values for width, height, pause, and repeat in the HTML file. Ex. 1004, 89–90. This results in changing the size, duration, and frequency of the display of the multiple pocket watch image objects without changing the image files or the Java applet. Id. That is, the 12 image objects of Lemay Web can be uniformly formatted by applying and altering the style settings of the HTML file, which is stored separately from the image objects and the Java applet. Id. at 88– 89. In our Final Written Decision, we wrote that “Lemay Web discloses that the image files that are displayed as the animation object are separate from the HTML.” Ex. 1004, 88–89.” Dec. 22. The Federal Circuit wrote that “how the Board evaluated what constitutes separateness in the prior art software is less than clear.” Opinion, 13 n.7. To be clear, the animation of Lemay Web comprises 12 different pocket watch image objects. Ex. 1004, 89. The HTML file that contains the style settings for the 12 different pocket watch image objects is stored separately from the 12 different pocket watch image objects. Id. at 88–91. The style of the 12 different pocket watch image objects can be altered by changing the values of the style settings in the separate HTML file, thus allowing the style to be uniformly applied to each of the associated 12 pocket watch image objects when the pocket watch image objects are created on the web page. Id.; see Ex. 1030 ¶¶ 28–29; Dec. 21–22. In conclusion for issue (B), we find that Lemay Web teaches applying the style located in the separate HTML file to the pocket watch image objects when creating the pocket watch image objects on the web page. Therefore, Lemay Web’s style is “defined separately from any single object” as claimed. Because Lemay Web’s style can be applied to one object and more than one object and Lemay Web’s style is defined separately from any single object, we find that the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style.”” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot reached

    “As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 9

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “What you see in the bottom right is an excerpt from the Lemay Web book . . . [y]ou can still use the Java applet just by putting this applet code into your HTML file. So this shows the animator class is going to be run within height or how big a window within the browser should be allocated in this applet. You can . . . tell the animator class how long to pause in between each image. So that’s a style that’s being applied to all of the multiple images that make up this animation. Ex. 2029, 746:23–747:7. Patent Owner then asked GoDaddy’s expert “for each unique animation you want to create with this animator class that’s shown here, you’re going to have to have a unique set of HTML code with the settings along with any of the images you’ll want to associate with the animator class, right?” Ex. 2030, 793:7–11. GoDaddy’s expert testified, with reference to Exhibit 2027, 80, that “Yeah. I’m not a hundred percent sure I understand your question, but yes, if you had six animations on a page, for example, you’d have six blocks of markup that looked like the markup at the bottom right of that slide, starting with applet.” Id. at 793:12–16. In addressing Patent Owner’s question about “each unique animation,” GoDaddy’s expert provided a hypothetical example of a web page having six animations, and explained that the six animations have six blocks of markup. Ex. 2030, 793:13–16. We find that this testimony means that if a web page has six unique animations, then for each unique animation, a corresponding HTML file contains the style settings for the image objects of that animation, such that the “six animations on a page . . . have six blocks of markup.” Id. We find that the subsequent testimony of GoDaddy’s expert cited by Patent Owner is consistent with the expert’s initial testimony that Lemay Web’s style is “applied to all of the multiple images that make up this animation.” Ex. 2029, 747:5–7. We also find that the subsequent testimony is consistent with and supported by the disclosure of Lemay Web, which teaches that an animation has a set of image files and is added to a Web page using the Animator applet. Ex. 1004, 88 (“[Y]ou’ll learn just enough about Java applets to set up animation on your Web page. . . . To create animation using Java and the Animator applet, you’ll need . . . [a] set of image files . . . that make up your animation.”); see id. at 88–91. That is, Lemay Web, consistent with the testimony of GoDaddy’s expert, discloses that the style settings for the animation of the pocket watch in the HTML file are uniformly applied to the 12 pocket watch image objects. Id. at 88–91.” slip op. at 17

  Patent outcomesUS 7,594,168 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 7,594,168
• Facebook, Inc. / SAP America, Inc. et al. v. Express Mobile, Inc.All claims unpatentable
  PTAB · Jan 16, 2026 · IPR2022-00597 · APJ Jeffrey S Smith · IPR · Remand

  Claims 1–4 and 6 are unpatentable under §103 over both listed prior art combinations; Lemay Web teaches the claimed style under the Federal Circuit’s construction.

  RulingsRemand decision

  • RemandOther

    “As directed by the Federal Circuit, we determine whether the prior art combination teaches limitations 1(c) and 1(g) under the proper construction of “style,” but otherwise do not revisit our analysis of claim 1. Remand Opinion 7, 13–14. The Federal Circuit construed “style” to mean “a collection of one or more settings that is defined separately from any single object but can be associated with one or more objects,” with the understanding that “associated with one or more” means capable of being associated with both one object and more than one object. Id. at 14.” slip op. at 4

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “We agree with Petitioner. As discussed above, the plain meaning of an “image object” read in light of the Specification encompasses data that defines an image, such as each of the 12 different pocket watch images of Lemay Web. Ex. 1004, 89–90. Therefore, the HTML file of Lemay Web, which specifies attributes including width, height, pause value, and repeat value of the pocket watch image objects, is “capable of being applied to more than one” image object, such as each of the 12 different pocket watch image objects described by Lemay Web. Id.” slip op. at 11

  • Strike new argumentNew argument consideredDecided for petitioner

    “We agree with Petitioner. The Board and Petitioner understood the meaning of “or” in the phrase “one or more objects” in Patent Owner’s proposed construction of style as meaning that “a style . . . can be associated with just one object.” Dec. 22; see Reply 4–5. The Federal Circuit “ultimately conclude[d] that Express Mobile’s proposed construction, with ‘or’ properly interpreted,” means “that the claimed ‘style’ must be capable of being applied to both one and more than one ‘object,’” and “remand[ed] for further proceedings in view of the correct claim construction.” Remand Opinion 13. In doing so, the Federal Circuit stated that “[i]t may be that under the correct claim construction, the Board finds that Lemay Web teaches the claimed ‘style’; however, that is still an open fact question for the Board to decide in the first instance.” Id. at n.6. Given that the Federal Circuit has ordered the Board to determine whether the prior art teaches the claimed “style” under the proper construction, we find that Petitioner’s arguments on this issue are timely.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “Contrary to Patent Owner’s contention, the Specification discloses, “Data that defines text button, image, paragraph, or other parent objects . . . can be stored in two-dimensional arrays (by web page and by object number).” Ex. 1001, 22:11–13 (emphasis added). The Specification further discloses that “objects . . . include colors, fonts, images, audio clips, video clips, text areas, URLs and thread objects.” Id. at 2:16–17 (emphasis added); see id. at 8:40. We highlight that the Specification’s use of “object” is consistent with a definition of “object” in the computing art at the time of the invention, which is “(2) A passive entity that contains or receives data; for example, bytes, blocks, clocks fields, files . . . .” George McDaniel, IBM Dictionary of Computing, McGraw-Hill, Inc. 1994, p. 471 (Ex. 3001). Because the Specification discloses that data defines an object, we construe the plain meaning of the claimed “object,” read in light of the Specification of the ’168 patent, as encompassing data that defines the object. See Phillips v. AWH Corp., 415 F.3d 1303, 1315 (Fed. Cir. 2005) (The “specification . . . is the single best guide to the meaning of a disputed term.”); Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1583 (Fed. Cir. 1996); (Excluding an embodiment in the specification from “the scope of the patent claim . . . is rarely, if ever, correct.”). Further, because the Specification discloses that data defines image objects, and that objects include images, we construe the plain meaning of the claimed “image object,” read in light of the Specification, as encompassing data that defines an image, such as one of the 12 different pocket watch images of Lemay Web.” slip op. at 8

  Patent outcomesUS 7,594,168 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 7,594,168
• Cambridge Industries USA, Inc. v. Applied Optoelectronics, Inc.Rehearing denied
  PTAB · Dec 19, 2025 · IPR2025-00434 · APJ Mitchell G Weatherly · IPR · Rehearing

  The Board denied Petitioner’s rehearing request, leaving institution denied because Shen and Soldano did not establish a reasonable likelihood of anticipating claims 1–7.

  RulingsRehearing decision

  • RehearingRehearing, deniedDenied

    “When rehearing a decision on petition, the Board will review the decision for an abuse of discretion. See 37 C.F.R. § 42.71(c). An abuse of discretion may be determined if a decision is based on an erroneous interpretation of law, if a factual finding is not supported by substantial evidence, or if the decision represents an unreasonable judgment in weighing relevant factors. See Arnold P’ship v. Dudas, 362 F.3d 1338, 1340 (Fed. Cir. 2004). The party challenging the decision has the burden of showing the decision should be modified, and the request for rehearing “must specifically identify all matters the party believes the Board misapprehended or overlooked, and the place where each matter was previously addressed” in its papers. 37 C.F.R. § 42.71(d).” slip op. at 2

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “II. ANALYSIS In our Decision, we concluded that Petitioner had failed to carry its burden of demonstrating a reasonable likelihood of prevailing that either Shen or Soldano anticipated claims 1–7. Dec. 18, 26. Petitioner argues that we should institute review for three reasons. First, Petitioner argues that we abused our discretion by (a) “refusing” to interpret the scope of the claimed” slip op. at 2

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Owner’s interpretation of “carrier” as meaning “one or more components for supporting ROSA components such as an AWG.” Dec. 9 (quoting Pet. 11). For our analysis of Petitioner’s challenges, we referred to this interpretation of “carrier” as Petitioner’s second alternative construction. Id. We also noted that Petitioner appeared to dispute Patent Owner’s interpretation when it argued that “carrier” should mean “a ceramic or silicon substrate.” Id. (quoting Pet. 10). We referred to this interpretation of “carrier” as the first alternative construction. Id. Rather than resolve this apparent dispute about the meaning of “carrier,” we found that both of Petitioner’s anticipation challenges failed under both interpretations of “carrier.” Id. at 10–26. Because we found that Petitioner had failed to carry its burden regardless of which interpretation of “carrier” applied, we found it unnecessary to resolve the dispute over that interpretation. Id. at 9–10. For the reasons expressed in Parts II.B–C below, we maintain our conclusion that Petitioner has failed to demonstrate a reasonable likelihood of proving that either Shen or Soldano anticipates any claim under either interpretation of “carrier.” Accordingly, Petitioner fails to demonstrate an abuse of discretion in our alleged “refusal” to interpret “carrier.”” slip op. at 3

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “Reh’g Req. 14. We cannot weigh Petitioner’s arguments based on its assertions about “caselaw” because Petitioner cited no cases to support its arguments. See id. Nevertheless, we infer that Petitioner intends its statements of “caselaw” to refer to the requirements to make out a case for anticipation. If so, Petitioner demonstrably miscasts what appear to be the legal principles for proving anticipation. As stated in our Decision: “A claim is anticipated only if each and every element as set forth in the claim is found, either expressly or inherently described, in a single prior art reference.” Verdegaal Bros., Inc. v. Union Oil Co. of California, 814 F.2d 628, 631 (Fed. Cir. 1987).” Dec. 7. Making a showing that a prior art reference anticipates a patent claim thus necessarily requires proof that a single reference “expressly or inherently” describes every element of that claim and with all elements being arranged in the reference as they are in the” slip op. at 7

  Claim construction§ 102 anticipation
  Patents in suitUS 10,379,301
• Apple Inc. v. Apex Beam Technologies LLCInstituted
  PTAB · Dec 2, 2025 · IPR2025-00894 · APJ Scott A Daniels · IPR · Institution

  The Board instituted IPR on claims 1–20 and all petitioned grounds, finding a reasonable likelihood that Yeo and TS36 render at least claim 1 obvious.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the arguments and evidence presented by Petitioner and Patent Owner, we are persuaded that Petitioner has demonstrated a reasonable likelihood that it would prevail in showing the unpatentability of at least one of the challenged claims. See 35 U.S.C. § 314(a). Accordingly, we institute an inter partes review of the challenged claims. slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner does not dispute Petitioner’s proposed level of ordinary skill in the art stating that “[f]or the purposes of this Preliminary Response only, Patent Owner utilizes Petitioner’s proposed level of skill in the art.” Prelim. Resp. 2. On this record, Petitioner’s proposed level of ordinary skill in the art is not disputed and is consistent with our review and understanding of the technology and descriptions in the ’767 patent and the asserted prior art references. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)No construction neededNot reached

    “under 112(f) pointing out the respective functions and structure disclosed in the ’767 patent specification. Pet. 18–20. Patent Owner does not dispute the construction of these terms, stating only “that claim construction is not required to resolve any issues.” PO Resp. 2 (citing Pet. 18–20). Where there is no dispute and our Decision does not turn on any particular construction of these terms, we need not decide at this point whether “receiver module” and “transmitter module” invoke means-plus-function under 112(f). Pet. 13; Prelim. Resp. 5. And, because there is no dispute, we conclude that no express interpretation of any claim term is necessary to determine whether to institute an inter partes review in this proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the” slip op. at 10

  • BurdenInstituted

    “In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1889, 1363 (Fed. Cir. 2016) (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). slip op. at 8

  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,462,767
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.

  RulingsFinal written decision

  • BurdenFwd all claims patentableNot shown unpatentable

    “4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18

  • Skill levelSkill level petitioner adoptedOther

    “A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.