• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Penumbra, Inc. v. Rapidpulse, Inc.No claims unpatentable
  PTAB · Feb 17, 2026 · IPR2024-01261 · APJ Jamie T Wisz · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because the asserted combinations did not teach the claimed predetermined cycle for controlling distal fluid flow.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(1) a person with a B.S. in engineering or an equivalent field, with two-four years of academic or industry experience in aspiration embolectomy and thrombectomy or comparable industry experience who would, where appropriate, work or consult with others, including a physician, to develop embolectomy or thrombectomy devices; or (2) an interventional neurosurgeon with at least three years of experience developing and/or using medical devices in embolectomy or thrombectomy procedures, and who would, where appropriate, work or consult with others, including an engineer, to develop such a medical device. Pet. 11 (citing Ex. 1005 ¶ 48). Petitioner also contends that, “[a] person with less education but more relevant practical experience, or more relevant education but less practical experience, may also meet this standard.” Id. Patent Owner states that for purposes of its PO Response, it “accepts ¶ 44). We adopt Petitioner’s characterization because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’402 patent and the cited prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “specification explicitly includes sensors similar to those in the prior art in support of their argument that the claimed “predetermined cycle” must not exclude the use of such sensors. Pet. Reply 15 (citing Ex. 1001, 32:55–33:7, 40:66–41:5, 44:9–29). We reviewed the portions of the specification cited by Petitioner. We agree with Patent Owner that one excerpt discussing sensor use appears to be directed to triggering the predetermined cycle rather than causing timing changes during the cycle itself (Ex. 1001, 32:55–66) (describing use of a pressure sensor to “determine when the vacuum channel 3 is clogged by a thrombus and automatically perform the unclogging procedures described herein”), while another excerpt discusses a sensor that Petitioner that the ’402 patent discusses the use of sensors to “tune” the system and that such “tuning” can be done statically (setting the cycle timing in advance) or dynamically (adjusting the timing during the cycle itself). See Ex. 1001, 48:19–49:50. Overall, we find that these disclosures involving sensors demonstrate that sensors may be used in various ways in different embodiments. However, none of these disclosures explicitly discuss the use of sensors in conjunction with a “pre-determined cycle.” Therefore, we find that the ’402 patent specification’s discussion of “sensors” are not particularly informative as to the appropriate construction of a “predetermined cycle” and do not outweigh the other explicit disclosures of “predetermined cycle” in the patent. We next turn to the other intrinsic evidence discussed by the parties — the prosecution history. As discussed by Patent Owner, in the Notice of Allowance, the Examiner found that Garrison did not teach or suggest a “predetermined cycle” because Garrison’s controller “changed the cycle of opening and closing the valves based on feedback from sensors.” Ex. 1004, 86. We acknowledge that the patent applicant filed subsequent comments during prosecution in which they stated that they “do[] not concede that the Examiner’s characterizations of the terms of the claims and the prior art are correct.” Id. at 29. However, we agree with Patent Owner that the importance of the Examiner’s statement in the Notice of Allowance does not rely on it being an express disclaimer (a standard which it does not meet). PO Sur-reply 8. We also considered Petitioner’s contention that the Examiner’s interpretation of Garrison may have been in error (PO Resp. 16); however, even if this were true, the Examiner’s statement still provides helpful insight into how the Examiner was interpreting the term sensors to change the opening and closing of valves during a cycle was not a “predetermined cycle.” Id. at 86. In sum, we find that Patent Owner’s proposed construction is consistent with the usage of the term “predetermined cycle” in the ’402 patent specification and prosecution history. Thus, after considering all of the cited evidence, we construe “predetermined cycle” to mean that “the timing of the sequence of valve operations in the cycle is determined beforehand, i.e., fixed, rather than varying based on feedback after operation begins.”” slip op. at 14

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “2. Other Terms The parties also provided proposed constructions for the limitations of “[limited/limiting] to a positive amount of exit flow” and “control[ling] fluid flow in and out from the distal end of the catheter.” See Pet. 15–16; Pet. Reply 1–8; PO Resp. 22–24; PO Sur-Reply 2–6. However, having evaluated the arguments and evidence before us, we determine that construction of these terms is not necessary for purposes of this Decision. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that neither Petitioner nor Mr. Brown propose any combination of Yang and Mullins that does not include Mullins’s pressure sensor in order “to control fluid flow in and out from the distal end of the catheter.” Indeed, in addressing the “predetermined cycle” limitation, Mr. Brown contends that Mullins discloses a “cycling controller that ‘varies aspiration pressure according to sensed pressure within the catheter lumen.’” Ex.1005 ¶¶ 131–32 (citing, e.g., Ex.1008, 27:40–28:20 (“[a] novel aspect of this pump system is the incorporation of feedback into the pump algorithm in order to produce more effective pressure cycling”)). This use of a sensor to change pressure during a cycle, is not a “predetermined cycle” under our construction. combinations is its discussion of distal end flow control, not for its sensors.” Pet. Reply 17 (citing Ex. 1035 ¶ 83). However, Petitioner’s obviousness grounds rely on the combination of Yang and Mullins, especially with regard to Mullins’s disclosure of “a controller” in order “to control fluid flow in and out.” As discussed above, Mullins relies on the sensor-feedback approach in order to control flow and we find that Petitioner has not presented persuasive evidence of how the combined disclosures of Yang and Mullins would control flow without using Mullins’s sensor feedback approach. See W.L. Gore & Assocs., Inc. v. Garlock, Inc., 721 F.2d 1540, 1550 (Fed. Cir. 1983) (error to “consider[] … references in less than their entireties, i.e., in disregarding disclosures in [them] … that diverge from and teach away from the invention”). Therefore, we determine that Petitioner has not sufficiently shown that the combination of Yang and Mullins discloses or renders obvious “a controller configured to open and close the vacuum valve and the vent valve in a predetermined cycle to change a level of vacuum at the distal end of the catheter and to control fluid flow in and out from the distal end of the catheter.” Accordingly, having considered the parties’ respective evidence and arguments, we find that Petitioner has not shown by a preponderance of the evidence that claim 1 of the ’402 patent would have been unpatentable as obvious over the combination of Yang and Mullins.” slip op. at 27

  Patent outcomesUS 11,406,402 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,406,402
• Axion Biosystems, Inc. v. Agilent Technologies, Inc.No claims unpatentable
  PTAB · Feb 2, 2026 · IPR2024-01467 · APJ David Cotta · IPR · Final written decision

  Claims 1–8 and 11–15 were not shown unpatentable over Xu-752 and Jones because the proposed combination did not establish obvious millisecond time resolution.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art (“POSA”) as of May 2009 “would have had a B.S. in electrical/mechanical/biomedical engineering or biological science, or a related field, and approximately 2 years of relevant experience or equivalent study in systems and methods for bioanalysis of cells.” Pet. 14 (citing Ex. 1003 ¶¶ 23–25). Patent Owner adopts this definition for purposes of this proceeding. PO Resp. 9 (citing Ex. 2009 ¶ 19). We find Petitioner’s description of the level of ordinary skill in the art to be consistent with the level of skill reflected in the ’508 patent and in the prior art of record. Accordingly, we apply Petitioner’s definition in this decision.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “As used herein, “impedance measurement at millisecond time resolution” refers to the ability to perform a series of at least two consecutive impedance measurements within milliseconds of one another for each and every well of the system where each well is associated with an electrode array for impedance measurement. In each instance the time between two consecutive impedance measurements are less than 300 milliseconds from one another. Id. at 10:8–15. There does not appear to be any dispute as to the definitional nature of the first sentence in the passage above. That is, the parties agree that millisecond time resolution should be construed to mean: “the time between two consecutive impedance measurements for each and every well being evaluated in the claimed apparatus or system.” PO Resp. 15 (proposing construction); Pet. Reply. 23 (“Axion also agrees that the term ‘millisecond time resolution’ is ‘the time between two consecutive impedance measurements for each and every well being evaluated in the claimed apparatus or system.’”). The parties also agree that we do not need to determine whether the time interval between two consecutive impedance measurements is less than 300 milliseconds, as set forth in the definition portion of the specification, or whether it can be met by some other time interval, as suggested by other portions of the specification. See e.g., Ex. 1001, 23:49–55 (explaining that “[i]n some embodiments 500 millisecond time resolution is sufficient”), 24:37–39 (similar); PO Resp. 15 (arguing that “the distinction between 300 milliseconds and 500 milliseconds is immaterial to the dispute in this IPR because Jones teaches a 1.5 second update period, thus at least three times longer than the 500 milliseconds formulation”); Pet. Reply 23–24 (section headed “[Petitioner] Agrees That, In This IPR, The 300 Versus 500 Milliseconds Distinction is Immaterial To Addressing the Unpatentability of the Challenged Claims”), see also, Pet. Reply 24–26 (asserting that the claims are indefinite because it is not clear whether they require a 300 or a 500 millisecond time interval, but arguing that “the claims’ unpatentability can be determined without resolving the 300 versus 500 milliseconds indefiniteness issue”). We agree with the parties that “millisecond time resolution” should be construed to mean: “the time between two consecutive impedance measurements for each and every well being evaluated in the claimed apparatus or system.” PO Resp. 15; Pet. Reply. 23. We further agree that resolution of this case does not require that we determine whether the period between two consecutive impedance measurements is less than 300 or less than 500 milliseconds because Petitioner has not carried its burden under either time interval.” slip op. at 7

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Ex. 1003 ¶ 179. But Dr. Kim does not cite to any additional supporting evidence or provide any technical reasoning to support his statements. The notion that one can reduce the time between measurements by, e.g., reducing the number of frequencies measured, has intuitive appeal and appears mathematically correct. However, the absence of technical reasoning and supporting evidence diminishes the persuasiveness of Dr. Kim’s testimony that the POSA would made such modifications to reduce the time between measurements. Dr. Kim does provide some technical reasoning in connection with his discussion of eliminating all reference channels as a way to get the time resolution down to the levels required by, e.g., claim 14, which recites a millisecond time resolution of “less than 5 milliseconds.” See e.g., Ex. 1003 ¶ 172 (“A POSA seeking to study biological cell phenomena occurring on the order of a few milliseconds would have recognized that after measuring the reference network channels at the start, the reference network channels would not need measured again for some time, e.g., because temperature and other drift factors do not change appreciably on a millisecond time scale.”). However, even if we were to credit this testimony, Dr. Kim still lacks support and reasoning for the selection of the other parameters in his noreference-channel calculations. See, e.g., id. ¶ 173 (positing, but not providing technical reasoning for using, a no-reference-channel impedance system with 16 wells, a single 10kHz measurement frequency, and 16 daughter boards that measure simultaneously rather than sequentially).” slip op. at 29

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable

    “Given that Jones’s only exemplified embodiment targets a 1.5 second update period, that Jones does not suggest reducing the update period, and that much of Jones’s focus is on benefits other than speed of measurement, Jones’s impedance analyzer seems an unlikely choice for a POSA seeking to take measurements having millisecond time resolution. Put another way, we find no persuasive non-hindsight reason that supports Petitioner’s assertion that the POSA would have sought to apply Jones’s impedance analyzer to Xu-752’s system in order to take measurements in millisecond time resolution.” slip op. at 22

  Patent outcomesUS 11,906,508 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,906,508
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.No claims unpatentable
  PTAB · Dec 10, 2025 · IPR2024-01186 · APJ Brian D Range · IPR · Final written decision

  Claims 1–20 were not shown unpatentable because Kwatra does not teach or suggest minimizing rotational velocity and acceleration as required by the claims.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (POSITA) would have the following characteristics: “a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing or digital cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–37). Petitioner states that, “[a]lternatively, a POSITA would have four years of experience working on image or video processing 6 Patent Owner asserts objective evidence of nonobviousness. Prelim. Resp. 19–27. or digital cameras.” Id. Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute the level of ordinary skill in the art. Prelim Resp. 14–15. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’894 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Petitioner “does not believe any terms require a formal construction.” Pet. 6. Patent Owner agrees “no claim terms presently require construction to resolve any current dispute between the parties.” PO Resp. 15. We do not discern a need to construe explicitly any claim language at this juncture because doing so would have no effect on our analyses below of Petitioner’s asserted grounds and will not assist in resolving the present controversy between the parties. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Kwatra teaches, at Equation 7, minimizing velocity and acceleration of a function representing camera path (P). FF ¶¶ 6, 8–9. Kwatra does not state that this camera path function considers rotation. Rather, the words “camera path” suggest x, y, z movement of the camera rather than rotation of the camera. Dr. Foroosh’s testimony that Kwatra’s minimization of a smoothed camera path does not result in minimizing rotational velocity and acceleration is credible because this testimony is consistent with Kwatra as a whole and consistent with the other evidence of record. Id. ¶ 10. Kwatra recognizes that image rotation angle (“θ”) may not remain smooth. Id. ¶ 12. But rather than attempting to minimize velocity and acceleration of rotation of the camera housing, Kwatra states that applying a smoothness constraint on rotation angle “may be non-linear.” Id. ¶ 13. Consistent with Kwatra, Dr. Foroosh credibly explains the difficulty of applying linear techniques to rotation. Id. Thus, Kwatra proposes instead constraining the sine and cosine of theta. Id. ¶ 14. The Kwatra provisional application is part of the Kwatra reference (id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “(id. ¶ 15), and it similarly opts for simpler schemes rather than estimating all parameters for all frames jointly. Id. ¶ 16. The provisional explains that the rotational component is relatively small such that non-linear computations minimizing velocity and rotation can be avoided. Id. ¶¶ 17–18. The testimony of Patent Owner’s witness, Dr. Foroosh, explaining the provisional is credible (Ex. 2018 ¶ 72) because it is consistent with Kwatra’s complete disclosure. Dr. Foroosh’s testimony is more credible than the testimony of Petitioner’s witness, Dr. Katsaggelos, because Dr. Katsaggelos did not review the Kwatra provisional application and, thus, did not review the entire disclosure of Kwatra. Id. ¶ 19; see also In re Etter, 756 F.2d 852, 859 (Fed. Cir. 1985) (en banc) (obviousness analysis considers whether “the claimed inventions are rendered obvious by the teachings of the prior art as a whole” (emphasis added)).” slip op. at 28

  Patent outcomesUS 10,574,894 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,574,894
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01165 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Zhou does not teach the claimed low-light high-pass or stickiness parameter limitations.

  RulingsFinal written decision

  • BurdenFwd all claims patentableNot shown unpatentable

    “4. Conclusion for the Prior Art Analysis In sum, we find that Zhou does not disclose the low-light high-pass parameter or the stickiness parameter. Petitioner’s grounds for both independent claims 1 and 16 rely on Zhou for teaching a low-light high-pass parameter or a stickiness parameter. Pet. 23–28, 64. Because we find Zhou does not teach these limitations, all of Petitioner’s grounds fall for this reason. III. CONCLUSION For the reasons given above, we determine that Petitioner has not established by a preponderance of the evidence that any claim of the ’840 patent would have been obvious in view of the prior art cited.” slip op. at 18

  • Skill levelSkill level petitioner adoptedOther

    “A person of ordinary skill in the art (POSITA) in the field of the ’840 patent would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras. Alternatively, a POSITA would have four years of experience working on image or video processing, or digital cameras. An advanced graduate degree in the disciplines cited above may make up for the work experience indicated above. Pet. 6 (citing Ex. 1002 ¶ 32). Patent Owner applies the same standard. PO Resp. 26–27. We use this agreed-upon standard for purposes of this Decision.” slip op. at 7

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We review this testimony based on the strength of the underlying factual basis. 37 C.F.R. § 42.65(a); Ashland Oil, Inc. v. Delta Resins & Refractories, Inc., 776 F.2d 281, 294 (Fed. Cir. 1985) (“Lack of factual support for expert opinion going to factual determinations, however, may render the testimony of little probative value . . ..”). Here, the underlying factual basis is not very strong for either witness. That said, we find that Dr. Foroosh’s testimony is more logically sound and consistent with the ’840 patent disclosure. Based on our reading of the specification, we find a clear indication that “stickiness” has to do with the past. In order to control “the extent by which preceding portion(s) . . . impacts determination of the smoothed trajectory” (emphasis added), one must control the degree by which the past frames impact determination. And to control the degree of the past’s influence, one must, as a consequence, favor the past over the future. That is, the frame of reference of the stickiness parameter is the past. The specification could have used a time-agnostic term, like a “nearness” or “adjacency” parameter, but it did not. Thus, the fact that “stickiness” is used in conjunction with “preceding” indicates that it deals with a preference for preceding frames. On this basis, we find Dr. Katsaggelos’s testimony less persuasive than Dr. Foroosh’s.” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “That said, we do not construe a stickiness parameter as prohibiting consideration of future frames. Instead, we determine that the stickiness parameter’s value determines the impact of the preceding portions, versus the following portions. The ’840 patent recognizes this, when it says that a stickiness parameter value of “1,” representing a “lazy” stabilizer that maximally favors the past, would not override a violation of the margin constraint based on the look-ahead (i.e., would not allow the viewing window to fall out of bounds in the event of large future motion). See Ex. 1001, 22:26–30; see also id. at 12:61–13:29 (acknowledging that favoring the past may lead to a conflict with the viewing window determination), 15:39–60 (adjusting the viewing window to ensure it does not violate a margin constraint). Thus, while a past-favoring parameter by necessity favors the past over the future, it does not prohibit consideration of the future. In view of the above, we construe the claimed “stickiness parameter” as a parameter that controls the extent by which preceding portions of the trajectory impacts determination of the smoothed trajectory, with an understanding that in order to favor preceding portions, to some extent, the parameter must relatively disfavor following portions.” slip op. at 10

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, IncNo claims unpatentable
  PTAB · Nov 25, 2025 · IPR2024-01164 · APJ William V Saindon · IPR · Final written decision

  Claims 1–21 were not shown unpatentable because Shi does not disclose the claimed low-light high-pass parameter required by the asserted obviousness grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Given the teachings of the specification, we agree with Patent Owner that a low-light high-pass parameter is a parameter of a smoothing function that favors high frequencies (high pass) when exposure times are long (low light). See Tr. 42:10–18 (Patent Owner’s counsel stating that “high-pass” means “there’s a bias or preference for high frequencies”); Ex. 2020, 93:23– 94:15 (Petitioner’s declarant, Dr. Katsaggelos, agreeing that a high-pass system attenuates the low frequency of a signal). Although we acknowledge Petitioner’s position that the specification provides other ways or considerations in implementing a smoothing function, based on our above analysis of the specification, we find that the specification describes the lowlight high-pass parameter as a specific component of a smoothing function. See, e.g., Ex. 1001, 21:17–25 (setting out several parameters besides the low-light high-pass parameter used in trajectory smoothing).” slip op. at 10

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “position and a real device position. Id. at 18:27–40. In other words, the blur is addressed by analyzing the image to identify motion and then shifting the image. Shi, however, does not disclose how its parameter is based on low light (or the long exposure times indicative of low light). In its Petition, Petitioner asserts that a person of ordinary skill in the art would understand that “blurs can be caused by low light conditions.” Pet. 28 (citing Ex. 1003 ¶ 111). Although this is true, that does not mean that Shi’s blurs are identified by a parameter that considers low light. As we just described, Shi identifies the blur by quantifying the amount of motion of the points in an image, not by identifying low light. This is simply a different way to determine the presence of motion blur. In Shi, blur is measured, whereas in the ’840 patent, it is inferred based on low-light conditions (e.g., by observing the exposure time). See, e.g., Ex. 1007, 18:7– 26; Ex. 1001, 19:12–26. In its Reply, Petitioner does not point to any further disclosures. Accordingly, we find that Shi does not disclose the “low-light” aspect of the claimed low-light high-pass parameter. This is sufficient to determine that Petitioner’s ground does not meet all claim limitations. Similarly, we find that Shi does not disclose the “high-pass” aspect of the parameter. Shi’s blur compensation uses a spherical interpolation to modify the image. Ex. 1007, 18:27–40. The low-light high-pass parameter, as we have construed the term, allows more high frequencies. To allow more high frequencies, this necessarily means either allowing fewer low frequencies, or allowing more high frequences as opposed to some counterfactual situation in which fewer high frequencies were going to be allowed. See Ex. 2020, 94:23–95:15; Ex. 2022. We are directed to no persuasive evidence from Petitioner that Shi’s spherical interpolation favors high frequencies over low frequencies. Accord Ex. 2018 ¶ 107 (Patent Owner’s expert stating that Shi’s spherical interpolation “reintroduce[es] both high- and low-frequency motion”). Even if Shi allows the viewing window to track the camera position “consistent with the natural blur in the image” (Ex. 1007, 17:63–67), we are not provided with sufficient evidence to conclude by a preponderance of the evidence that providing a similar visual goal as a high-pass parameter (Ex. 1001, 22:16–18, “the output motion may include high frequencies that mask motion blur”) is the same as having a high-pass parameter. Again, merely preserving high frequencies is not the same as having a “high-pass parameter” because, as construed, a “high-pass parameter” also involves some degree of attenuation of low frequencies or relative increase of high frequencies. Accordingly, we find that Shi does not disclose the “high-pass” aspect of the claimed low-light high-pass parameter.” slip op. at 18

  Patent outcomesUS 10,958,840 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,958,840
• Apple Inc. v. Resonant Systems, Inc.All claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00807 · APJ Karl D Easthom · IPR · Final written decision

  Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.

  RulingsFinal written decision

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claim 2 includes means-plus- function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 2–6; PO Resp. 7–15. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionDecided for petitioner

    “1. Construction of “Driving Component” Petitioner contends that the claimed function of “driving component” is “drives the moveable component to oscillate within the housing.” Pet. 5; Ex. 2002, 2. Petitioner asserts that the corresponding structure is a coil of conductive wire 420” (Figures 4A–4G); “coil 514” (Figures 5A–5B); “coil 626” (Figure 6); “electromagnet” (Figures 10-11); “additional coils 1202 and 1204” (Figure 12); “coils 1302 and 1304” (Figure 13); “driving coils 1412 and 1414” (Figure 14); “coil 1510” (Figures 15–17); “stator coils” (Figures 24A-25). Pet. 5–6 (citing Ex. 1001, 5:2–34, 5:54–59, 6:32–35, 9:11–52, 9:64–10:22, 14:59); Ex. 2002, 2.). Patent Owner states that it “does not believe that the phrase involving a ‘driving component’ needs to be construed in order to resolve any issue in this proceeding.” PO Resp. 7. Patent Owner agreed to the above construction in the Apple Litigation, and the court adopted this construction. Ex. 2002, 2. The record supports Petitioner’s position and we adopt it.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that a person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “In contrast to Petitioner’s showing, at the passage cited by Patent Owner, Dr. Goossen, Patent Owner’s expert, does not provide a basis for his opinion that “the combined system of Gregorio-Ramsay-Rossi-Aldrich does not teach the claimed output to the power supply.” Ex. 2009 ¶ 156; PO Resp. 21 (citing Ex. 2009 ¶ 156). To the extent Dr. Goossen addresses the issue, like Patent Owner, Dr. Goossen concedes that “a POSITA would recognize in the [annotated drawing of Gregorio supplied by Petitioner] that a power supply is required that is not shown.” Ex. 2009 ¶ 116. And also like Patent Owner, Dr. Goossen concludes that Petitioner’s rationale that an “unshown power supply receives a signal from the processor is a sweeping conclusion that does not follow.” Id. For the reasons discussed above in connection with Patent Owner’s parallel arguments, this testimony is conclusory and unsupported. Primarily, it does not adequately address Petitioner’s showing and Dr. Hannaford’s testimony, discussed above, which relies on Gregorio’s statement that “[p]rocessor 12 outputs the control signals to drive circuit 26 which includes electronic components and circuitry used to supply LRA 18 with the required electrical current and voltage to cause the desired haptic effects.” Ex. 1004, 2:36–39 (emphases added). Dr. Goossen and Patent Owner also do not address the initial finding in the Institution Decision that “[t]he ’337 patent does not disclose any detail or structure for the controllable power supply, indicating that such a controllable power supply was well-known.” Inst. Dec. 30 (citing Ex. 1001, 6:33–35 (“The power supply 612 receives a control input 624 from the CPU to control the current supplied to the H-bridge switch for transfer to the coil 626.”)).16 And while Dr. Goossen contends that Dr. Hannaford’s reliance on Ramsay to further suggest control of the power supply is conclusory because “Dr. Hannaford’s statement about ‘the current provided from a power supply to the driving component’ has nothing to do with Ramsay’s disclosure,’” Dr. Goossen addresses Ramsay and Gregorio in isolation, without adequately addressing the combination, specifically where Gregorio teaches or suggests controlling a power supply in order to provide desired LRA amplitude and frequency haptic effects, which is in line with Ramsay’s teaching of user-customizable parameters to control amplitude and frequency for the same purpose. See Ex. 2009 ¶ 126; Pet. 53–54 (summarized above). Therefore, the Petition shows persuasively that Gregorio’s processor controls Gregorio’s power supply to provide power to its haptic unit or that such power supply control would have been obvious in view of Ramsay in order to allow a user to control the desired haptic effect.” slip op. at 41

  Patent outcomesUS 8,860,337 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,860,337
• Azurity Pharmaceuticals, Inc. v. Exelixis Inc.Institution denied
  PTAB · Jun 4, 2025 · IPR2025-00210 · APJ Jeffrey N Fredman · IPR · Institution

  The Board denied institution on all grounds because Petitioner did not show a reasonable likelihood of proving claims 1–3 unpatentable.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “Accordingly, we find that on the current record Petitioner has not shown that the combination of Brown, Kubo, and Remington would inherently result in less than 200 ppm impurity and Petitioner has not shown that it has a reasonable likelihood that it would prevail on the obviousness ground.” slip op. at 29

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedReference not prior artDecided for patent owner

    “Here, there is no dispute that the ’349 patent and Wilson, which issued from a patent application from which priority was claimed for the ’349 patent, share the identical disclosure of a pharmaceutical composition comprising Compound IA or IB; one or more fillers; one or more disintegrants; one or more glidants; and one or more lubricants. In this embodiment, the filler comprises microcrystalline cellulose. In this embodiment, the disintegrant comprises croscarmellose sodium. In this embodiment, the disintegrant comprises croscarmellose sodium and sodium starch glycolate. In this embodiment, the glidant comprises fumed silica. In this embodiment, the lubricant comprises stearic acid. Ex. 1001, 21:1–12; Ex. 1002, 20:51–62. There is express ipsis verbis disclosure of the elements recited in claim 1 of the ’349 patent.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “1. Reason to reduce contaminant levels We agree with Patent Owner that Petitioner identifies no teaching in the prior art providing any reason to reduce levels of 6,7-dimethoxy-quinoline-4-ol specifically. And while Brown does teach a desire to form “substantially pure” compounds, Brown focuses on “at least about 90 wt.%” of the compound, then lists specifically “about 90, about 91, about 92, about 93, about 94, about 95, about 96, about 97, about 98, about 99 and about 100% wt. %.” Ex. 1003 ¶ 97. This permits a range of concentration for contaminants from about 0 to 10%.” slip op. at 24

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element) › Inherent disclosureInherency not foundNot shown unpatentable

    “to modify Brown’s process with Kubo to eliminate the added step. See, e.g., Id. ¶ 73. But even with that combination, Dr. Dichtel states only that a “POSA would have expected there to be a decrease in the amount of 6,7- dimethoxy-quinoline-4-ol at the end of cabozantinib (L)-malate’s synthesis that was attributable to hydrolytic degradation of the 4- (nitrophenoxy)quinoline intermediate by avoiding its use in the synthesis.” Id. ¶ 78. That is not, however, the standard for inherency. It must be the necessary result, not a possible expected result. The Federal Circuit in Par explained that: Inherency, however, may not be established by probabilities or possibilities. The mere fact that a certain thing may result from a given set of circumstances is not sufficient. If, however, the disclosure is sufficient to show that the natural result flowing from the operation as taught would result in the performance of the questioned function, it seems to be well settled that the disclosure should be regarded as sufficient.” slip op. at 28

  § 102 anticipation§ 103 obviousnessDiscretionary denialcites Phillips · KSR · Graham
  Patents in suitUS 11,298,349
• Sterlite Technologies Inc. v. Afl Telecommunications, LLC.Institution denied
  PTAB · Apr 9, 2025 · IPR2025-00127 · APJ Josiah C Cocks · IPR · Institution

  The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–4, 8, or 13 were unpatentable over either proposed obviousness ground.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied

    “At this preliminary stage, we determine whether the information presented shows a reasonable likelihood that Petitioner would prevail in establishing that at least one of the challenged claims would have been unpatentable over the proposed prior art. We analyze the asserted grounds with the above-noted principles in mind.” slip op. at 10

  • Skill levelOther

    “B. Level of Ordinary Skill in the Art As noted above, resolving the question of obviousness requires determination of the level of ordinary skill in the art. Graham, 383 U.S. at 17–18. Here, however, as Patent Owner observes (Prelim. Resp. 10), 8 Patent Owner does not present arguments or evidence of secondary considerations in its Preliminary Response. Therefore, secondary considerations do not constitute part of our analysis herein. Petitioner has provided no assessment as to the level of ordinary skill to be considered in evaluating the grounds of obviousness that are advanced by Petitioner. The absence of such assessment calls into question the fundamental adequacy of Petitioner in carrying its burden to show a reasonable likelihood of success of unpatentability of the challenged claims that necessarily must take into account the level of ordinary skill in the art.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “In any event, we do not discern that there is any apparent dispute between the parties as to the meaning of any claim term. In considering the record at hand, we determine that it is unnecessary to make explicit, or further address, any claim term in deciding whether or not to institute trial. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the 9 Throughout their briefings, the parties refer to the limitations designated [1.1] through [1.7] using the term “element,” e.g., “element [1.7]” (see, e.g., Pet. 23; Prelim. Resp. 23). For consistency with the parties’ chosen nomenclature, we do the same in this Decision. controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “A POSITA would have been motivated to modify Summers’ fiber optic cable 50 to include Kaji’s intermittently-fixed optical fiber tape 2A to obtain the predictable result of enabling a higher density of optical fibers to be packed in Summers’ fiber optic cable 50, as contemplated by Kaji. *** a POSITA would have had a reasonable expectation of success because such modification would amount to nothing more than a simple substitution of Summers’ four-fiber ribbons 52 with Kaji’s intermittently-fixed optical fiber tape 2A by known methods of cable manufacturing. ***” slip op. at 20

  Claim construction§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,287,591
• Uatp IP LLC v. Slick Slide LLCInstituted
  PTAB · Apr 8, 2025 · PGR2024-00054 · APJ Julia Heaney · PGR · Institution

  The Board instituted PGR on claims 1–17 and 22–28 and all asserted grounds, finding a sufficient likelihood that at least one challenged claim is unpatentable.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Institution of a post-grant review is authorized by statute when “the information presented in the petition . . . would demonstrate that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” 35 U.S.C. § 324(a) (2018). Upon consideration of the parties’ submissions and the evidence of record, we determine that Petitioner has demonstrated that it is more likely than not that at least one claim challenged in the Petition is unpatentable. Further, Patent Owner has not persuaded us that it is appropriate to exercise our discretion not to institute review. Accordingly, we institute a post-grant review of all claims and all grounds asserted in the Petition.1” slip op. at 2

  • Skill levelSkill level patent owner adoptedOther

    “On this record, we do not find Patent Owner’s proposed experience level of at least five years in measurement and analysis of coefficient of friction to be supported. As to the necessity of experience in textile engineering and fiber science, Patent Owner’s position, although not supported by declarant analysis of the factors listed above, is consistent with the disclosure of the ’854 patent, which describes features of a mesh layer in textile and fiber terms. See e.g., Ex. 1001, 10:17–11:14, 12:65–13:8, 14:20–24. On the whole, however, we do not discern on this record how specific experience in textile engineering and fiber science of a person of ordinary skill would materially alter the outcome at this stage of the proceeding. For purposes of this decision only, we apply Patent Owner’s proposed definition of a person of ordinary skill in the art, except for the requirement of five years of experience in measurement and analysis of coefficient of friction. The level of skill in the art remains an open issue in this proceeding. Further submissions by the parties may include argument and evidence that would assist in the resolution of this issue at the close of trial.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “Petitioner contends “no formal claim construction is necessary in this proceeding.” Pet. 10; Reply 1, 4. Patent Owner contends the terms “mesh layer” and “coefficient of friction” require construction. Prelim. Resp. 14–16; Sur-reply 2–5. We have considered the parties’ arguments and discuss them below with regard to each of the terms Patent Owner contends should be construed. Because our determination that Petitioner demonstrates at least one challenged claim meets the threshold for institution (see SAS Inst., 138 S. Ct. at 1359–60) is not based on construing the term “mesh layer” or “coefficient of friction,” we determine we need not construe either claim term at this stage of the proceeding. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). As further discussed below, we invite the parties to address claim construction at trial.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner

    “We agree with Petitioner that the ’854 patent specification does not include clear and explicit lexicography or a disclaimer that would support requiring “coefficient of friction” to be determined by a specific ASTM test method. The portion of the specification Patent Owner asserts as a definition of “coefficient of friction” (see Ex. 1001, 11:31–42) is a description of an embodiment; we find it does not express patentee intent to redefine the term. Further, the statement that “the coefficient of friction … may be determined using the … ASTM D1894 standard test method” (id. at 11:32–35) indicates that use of that specific test method is optional. Accordingly, in the absence of patentee lexicography or disavowal, we do not limit the scope of the term “coefficient of friction” to require that it be measured by a specific ASTM standard. Luminara Worldwide, LLC v. Liown Elecs. Co., 814 F.3d 1343, 1353 (Fed. Cir. 2016) (“Absent lexicography or disavowal, we do not depart from the plain meaning of the claims.”); In re Am. Acad. Of Sci. Tech Ctr., 367 F.3d 1359, 1369 (Fed. Cir. 2004) (“We have cautioned against reading limitations into a claim from the preferred embodiment described in the specification, even if it is the only embodiment described, absent clear disclaimer in the specification.”). We note that the ’854 patent specification sets forth a definition for the coefficient of friction between the surfaces of the mesh material and the slide surface. Ex. 1001, 4:38–46. As stated above, however, we do not expressly construe any claim term at this stage of the proceeding. Should the parties address the construction of “coefficient of friction” at trial, we will make a determination after the close of evidence and any hearing.” slip op. at 13

  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosureDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,998,854

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.