- Uatp IP LLC v. Slick Slide LLCSome claims unpatentablePTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision
Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner
“1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner
“2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20
Patent outcomesUS 11,998,854 mixedClaim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · NautilusPatents in suitUS 11,998,854 - Qualcomm Incorporated v. Cobblestone Wireless, LLCSome claims unpatentablePTAB · Mar 5, 2026 · IPR2024-01336 · APJ Russell E Cass · IPR · Final written decision
Claims 1–4, 6–9, 24, and 25 are unpatentable; claims 10, 13, 14, 17, and 21–23 were not shown unpatentable, principally due to missing limitations or insufficient motivation to combine.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“information” should be given its plain and ordinary meaning as “data,” and that Patent Owner’s narrower construction of “first information” and “second information” lacks sufficient support in the intrinsic record. We agree with Petitioner that the ’802 patent Specification defines “information” as data when it uses the phrase “information (i.e., data).” See Ex. 1001, 5:60–62 (“Information (i.e., data) to be transmitted may be received in a baseband digital system 250, such as a wireless digital baseband processor.” (emphasis added)), 11:30–32 (“In this example, the signals 911 and 912 carry the same information (data).” (emphasis added)). As the Federal Circuit has explained, a “specification’s use of ‘i.e.’ signals an intent to define the word to which it refers.” Edwards Lifesciences LLC v. Cook Inc., 582 F.3d 1322, 1334 (Fed. Cir. 2009). slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“argument based on Fernandez alone, we find that Petitioner has not provided a sufficient evidentiary basis to support a motivation to remove the amplification from each of Fernandez’s signal generators 10A-10E and add a single power amplifier instead. See Pet. 76–77 Ex. 1003 ¶ 235. Petitioner’s only rationale for this modification to Fernandez is that “[a] single amplifier has several advantages compared to multiple amplifiers, including lower complexity, a single (vs. multiple) potential point of failure, and lower cost,” and that one of ordinary skill “would have found a single amplifier to be a simple matter of design preference.” Pet. 76–77. Dr. Almeroth simply repeats these cursory allegations without providing any further explanation or evidentiary support. Ex. 1003 ¶ 235. Moreover, Dr. Cooklev provides credible testimony that replacing Fernandez’s amplification in signal generators 10A–10E with a single amplifier would not necessarily have the advantages that Petitioner suggests. See Ex. 2013 ¶¶ 99, 104–105. For example, Dr. Cooklev testifies that a single amplifier would need to have a wider bandwidth than the multiple amplifiers used in Fernandez, which could cause potential stability issues. Id. ¶ 105. According to Dr. Cooklev, this wider bandwidth would require more circuit elements, and thus would not provide the reduction in space usage and power consumption that Petitioner asserts. Id. According to Dr. Cooklev, Montojo also points to several “substantial, and potentially impractical, drawbacks” of using a single amplifier for multiple signal generators, including power constraints imposed by spectral emission requirements and on-board battery capacity. Id. ¶ 104 (citing Ex. 1006 ¶¶ 7– 8). In light of this testimony, which we find credible, Petitioner has failed to provide sufficient explanation or evidence to support its assertion that one of ordinary skill would have found it obvious to replace the multiple amplifiers in Fernandez’s signal generators with a single amplifier.” slip op. at 65
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“argument based on Fernandez alone, we find that Petitioner has not provided a sufficient evidentiary basis to support a motivation to remove the amplification from each of Fernandez’s signal generators 10A-10E and add a single power amplifier instead. See Pet. 76–77 Ex. 1003 ¶ 235. Petitioner’s only rationale for this modification to Fernandez is that “[a] single amplifier has several advantages compared to multiple amplifiers, including lower complexity, a single (vs. multiple) potential point of failure, and lower cost,” and that one of ordinary skill “would have found a single amplifier to be a simple matter of design preference.” Pet. 76–77. Dr. Almeroth simply repeats these cursory allegations without providing any further explanation or evidentiary support. Ex. 1003 ¶ 235. Moreover, Dr. Cooklev provides credible testimony that replacing Fernandez’s amplification in signal generators 10A–10E with a single amplifier would not necessarily have the advantages that Petitioner suggests. See Ex. 2013 ¶¶ 99, 104–105. For example, Dr. Cooklev testifies that a single amplifier would need to have a wider bandwidth than the multiple amplifiers used in Fernandez, which could cause potential stability issues. Id. ¶ 105. According to Dr. Cooklev, this wider bandwidth would require more circuit elements, and thus would not provide the reduction in space usage and power consumption that Petitioner asserts. Id. According to Dr. Cooklev, Montojo also points to several “substantial, and potentially impractical, drawbacks” of using a single amplifier for multiple signal generators, including power constraints imposed by spectral emission requirements and on-board battery capacity. Id. ¶ 104 (citing Ex. 1006 ¶¶ 7– 8). In light of this testimony, which we find credible, Petitioner has failed to provide sufficient explanation or evidence to support its assertion that one of ordinary skill would have found it obvious to replace the multiple amplifiers in Fernandez’s signal generators with a single amplifier.” slip op. at 65
- Expert testimonyPatent owner expert creditedPetitioner expert discountedOther
“We find credible and agree with Dr. Cooklev’s testimony that the predistortion signals from tables 17-1 and 17-2 “are cancelled out by Suzuki’s amplifier” 28. Ex. 2013 ¶ 50. Dr. Cooklev supports his opinion by referring to paragraph 1 of Suzuki, which states that Suzuki’s invention is directed to “a multi-band lookup table type predistorter” (such as the one implemented using lookup tables 17-1 and 17-2 in Figure 6) that “compensates for a distortion of a power amplifier.” Ex. 2013 ¶ 54; Ex. 1004 ¶ 1. Dr. Cooklev’s opinion is also supported by paragraph 3 of Suzuki, which explains that a conventional digital predistorter uses a lookup table “for linearizing non-linear characteristics of an amplifier.” Ex. 1004 ¶ 3; Ex. 2013 ¶ 54. Dr. Cooklev further supports his opinion by relying on Suzuki’s disclosure in paragraph 46 that power amplifier 28 is “subject to distortion compensation” by the predistorter, and that distortion components in the signal output by the amplifier are canceled by “distortion compensation data [that] are read out from the lookup tables 17-1 and 17-2 and provided to the adders 13-1 and 13-2, respectively.” Ex. 1004 ¶ 46; Ex. 2013 ¶ 54. And, Dr. Cooklev’s opinion is supported by Suzuki’s disclosure in paragraph 47 that the distortion compensation added by adders 13-1 and 13-2 add the distortion compensation data from lookup tables 17-1 and 17-2 “to perform distortion compensation (addition of predistortion)” to “signals to be transmitted.” Ex. 1004 ¶ 47; Ex. 2013 ¶ 54. Petitioner agrees that the distortion compensation data from lookup tables 17-1 and 17-2 “are added to the respective frequency band from” input signal ST “in order to predistort the output signal, which is then transmitted,” and does not dispute that the distortion compensation data from lookup tables 17-1 and 17-2 is ultimately cancelled out by the distortion created by amplifier 28. Pet. Reply 8. In light of the above evidence, we agree with Patent Owner that Suzuki’s distortion components from lookup tables 17-1 and 17-2 in Figure 6 (which Petitioner relies on for the first and second digital signals in limitations 10a and 10b) are cancelled out by the distortion created by power amplifier 28 before the signal is ultimately transmitted. We agree with Petitioner that these first and second digital signals include data in the form of distortion compensation data. However, because these signals are cancelled by the distortion from amplifier 28 before transmission, the data from these signals is never transmitted. Thus, the first and second digital signals identified by Petitioner (the distortion compensation data from lookup tables 17-1 and 17-2) do not comprise data “to be transmitted,” as limitations 10a and 10b require.” slip op. at 35
Patent outcomesUS 7,924,802 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,924,802 - Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentablePTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision
Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20
Patent outcomesUS 10,015,413 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,015,413 - Apple Inc. v. Resonant Systems, Inc.Some claims unpatentablePTAB · Oct 9, 2025 · IPR2024-00806 · APJ Norman H Beamer · IPR · Final written decision
Claims 1–8, 15–17, and 20 are unpatentable under § 103; claims 14 and 19 were not shown unpatentable because the proposed paramagnetic flux paths in Wakuda lacked adequate support.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 33. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 3. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’830 patent specification.” slip op. at 11
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner
“The parties agree that independent claims 1, 19, and 20 include means plus function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 3–7; PO Resp. 6–14. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claims 1, 19, and 20 are means plus function limitations. Pet. 3–7; PO Resp. 6–14. Construing a means plus function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 12
- Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for petitioner
“Therefore, the specification clearly links the function of “control[ing] supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” at least to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.11 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs to the switch; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law 11 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:17–20. that limits the structure to that necessary to perform the claimed function. 12 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“to include the ability disclosed in Ramsay to allow a user to customize and store parameters associated with haptic effects, such as creating “haptic track files” that specify variations in the amplitude and frequency of the effect over time to achieve a desired effect. Pet. 46–47 (citing Ex. 1006 ¶¶ 15, 25– 28, 37; Ex. 1003 ¶¶ 192–193). Petitioner argues that this combination would have been motivated by the desire to expand the functionalities of haptic devices to allow end users to create and customize haptic effects, to provide a fuller haptic experience, and to be able to store haptic effects to save processing power compared to real-time generated effects. Id. at 47–49 (citing Ex. 1006 ¶¶ 14–15, 30, 47, 53–57; Ex. 1003 ¶¶ 194–196). Petitioner argues that this making combination would have had a reasonable expectation of success given that both references deal with linear actuators, both disclose storing frequency and amplitude values, and the combination involves routine knowledge of software techniques. Id. at 49–50 (citing Ex. 1004, 2:3–9; Ex. 1006 ¶¶ 17, 26–28; Ex. 1003 ¶¶ 197–198). Petitioner further argues that it would have been obvious to use the H-bridge switch of Rossi as part of the Gregorio actuator drive circuit 16 in the asserted Gregorio-Ramsay combination to periodically switch the polarity of drive signals to electric coil 28 of Gregorio, and thus oscillate magnet 27, under the control of a signal from processor 12 of Gregorio. Pet. 56 (citing Ex. 1003 ¶ 211). Petitioner argues that this combination would have been motivated because Gregorio does not disclose implementation details and therefore one of ordinary skill would have looked toward teachings like Rossi to fill in those details, and that an H-bridge switch was a well-known example circuit for implementing a change in “current flow direction/polarity” for “push” and “pull” actions in a system, and was a simple, cost-effective, and reliable circuit design. Id. at 56–58 (citing Ex. 1020, Abstr., Figs. 4, 6, 1:65–3:54; Ex. 1003 ¶¶ 212–217). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques through routine circuit design considerations and software instructions for generating the control signal. Id. at 58 (citing Ex. 1003 ¶ 218). Petitioner further argues that it would have been obvious to modify the Gregorio-Ramsay-Rossi combination, using the control algorithm disclosed in Aldrich, to replace the monitoring technique of Gregorio with that of Aldrich to maintain a resonance frequency by incrementing or decrementing the drive frequency. Pet. 58–59 (citing Ex. 1004, 4:22–28, 4:42–48; Ex. 1021, 2; Ex. 1003 ¶ 219). Petitioner’s expert provides implementation details of Aldrich, including that the Aldrich hill-climb technique would use a Boolean value to indicate whether the frequency was being increased, with local variables set to default values, and use integer values when processing sensor signals. Id. at 59–60 (citing Ex. 1021, 2; Ex. 1003 ¶¶ 220–222). Petitioner argues that these modifications would have been motivated to improve the Gregorio system using the Aldrich feedback algorithm for targeting a resonant frequency, given that the Gregorio approach had shortcomings that required a monitoring period with reduced haptic feedback, receiving weak EMF signals. Id. at 61–62 (citing Ex. 2004, 3:65–5:55, 5:63–65; Ex. 1021, 1–3; Ex. 1003 ¶¶ 223–227). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques for improvement to yield predictable results, readily implemented via software executed by the microprocessor. Id. at 62–63 (citing Ex. 2004, 2:44–50; Ex. 1021, 2; Ex. 1003 ¶ 229). Patent Owner does not address Petitioner’s arguments regarding the” slip op. at 27
Patent outcomesUS 9,941,830 mixedClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 9,941,830 - Juniper Networks, Inc. v. Monarch Networking Solutions LLCSome claims unpatentablePTAB · May 5, 2025 · IPR2024-00175 · APJ Norman H Beamer · IPR · Final written decision
Claims 7, 9–11, 13, 14, 16, and 17 are unpatentable as obvious over Biswas and Kumar; the remaining challenged claims were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Pet. 14 (citing Ex. 1003 ¶¶ 62–64). Patent Owner does not dispute Petitioner’s proposal. PO Resp. 8–9. Petitioner’s proposal is consistent with the level of ordinary skill in the art as reflected by the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); GPAC, 57 F.3d at 1579. On this record, the level of ordinary skill is neither in dispute nor dispositive of any challenge. For purposes of this Decision, we apply Petitioner’s articulation.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Claim terms need only be construed to the extent necessary to resolve the controversy. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). The parties submit that no claim construction is necessary. Pet. 14; PO Resp. 15. We have not been presented with the need to construe any claim terms for this Decision. D.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“We determine that Petitioner has provided sufficiently articulated reasoning with rational underpinnings for the proffered combined teachings of Biswas and Kumar. We are persuaded by Petitioner’s declarant’s testimony that one of ordinary skill would have known to use the masking techniques exemplified by Kumar to implement the disclosed operation in Biswas of edge routers providing hosts with port number ranges. Ex. 1003 ¶¶ 77, 97–101. Accordingly, we determine that Petitioner has proved by a preponderance of the evidence that one of ordinary skill in the art would have been motivated to combine Biswas and Kumar.” slip op. at 13
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed
“This disclosure is inconsistent with any suggestion that the Fangman system, when routing a telephone call to its destination, identifies the private IP address of the destination telephone by determining the port range to which the port number of the destination telephone belongs. When Fangman describes the NAPPT process, it does not indicate that port ranges are used, but rather repeatedly states that port numbers are used: The [service gateway] receives a data packet from the IP device, including a public destination IP address . . . a destination port number . . . and source information, NAPPTs the data packet, using the [public destination IP address] and the [destination port number] to identify the [IP telephone] . . . . Ex. 1024, code (57). Performing NAPPT on the data packet received from the destination may include using the public destination IP address and the destination port number to uniquely identify the IP telephone, and changing the public destination IP address to a private source IP address of the IP telephone while leaving the destination port number unchanged. Ex. 1024, 4:28–33. The SG 170 may maintain a table of semi-permanent mappings of the external IP address and ports to the internal hosts and ports. Ex. 1024, 8:49–51.” slip op. at 33
Patent outcomesUS 8,693,369 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 8,693,369 - Wolfspeed, Inc. / Ideal Industries Lighting, LLC D/B/A Cree Lighting et al. v. Cao Lighting, Inc.Some claims unpatentablePTAB · Sep 28, 2023 · IPR2022-00847 · APJ Brian D Range · IPR · Final written decision
Claims 21, 22, 25, 26, 28–30, 32–36, 40, 42–44, 47–49, 52, 53, 56–59, 62, 63, 65–68, 71–73, 77, 78, 81, 82, 85, 86, and 88–91 are unpatentable over Begemann, Krames, and Allen; claim 41 is …
RulingsFinal written decision- ExcludeMotion to exclude, deniedDenied
“Patent Owner’s argument is unpersuasive because the Krames declaration addresses the Patent Owner Response and is relevant to the issues at hand. We start with an important observation: claim 21 (the only independent claim at issue) is an apparatus claim; the claim is directed to a “semiconductor light source.” Ex. 1001, 9:52. One requirement of this apparatus is that it comprise “at least one semiconductor chip” (id. at 10:1) where the “at least one semiconductor chip is a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts.” Id. at EPRC, 1:34–36. As we explain when addressing claim construction, infra, we adopt Patent Owner’s proposed construction of “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” as meaning “at least one LED chip is capable of emitting light greater than about 40 milliwatts.” See Section III.D, infra (emphasis added). Because of these recitations, Petitioner bears the burden of establishing that the prior art teaches or suggests a semiconductor chip “capable of emitting light greater than about 40 milliwatts.” As explained herein, we determine that in the Petition, Petitioner met this burden by establishing by a preponderance of the evidence that the Krames reference teaches an LED chip that has this capability. Pet. 54 (quoting Ex. 1008, 10). Notably, claim 21 does not require actual operation of anything at greater than 40 milliwatts because claim 21 is not a method claim. Petitioner never had a burden of establishing a method of running the Krames reference’s LED at this power output within a semiconductor light source.” slip op. at 12
- Skill levelSkill level patent owner adoptedDecided for patent owner
“We agree with Patent Owner that the challenged claims relate to light fixtures, LED packaging, and LED chip layer structure and that the ’961 patent claims reflect “a hybrid of the light bulb art and semiconductor art.” Resp. 19. The prior art of record, for example, Begemann, likewise reflects “a hybrid of the light bulb art and semiconductor art.” Id. (quoting Pet. 28). Petitioner’s expert, Dr. Lebby, agreed that a person having ordinary skill in the art would need to be “familiar with thermal issues.” Ex. 2015, 26:15– 28:16. While Petitioner’s proposed description of a person having ordinary skill in the art could, in some instances, be sufficient to qualify a person as having ordinary skill, Patent Owner’s proposal is a more complete and accurate description of the level of skill commensurate with the scope of the challenged ’961 patent claims. Patent Owner’s description appears consistent with the prior art and patent specification before us and is supported by witness testimony. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (prior art itself may reflect an appropriate level of skill). For the purpose of this Decision, we adopt Patent Owner’s description. We further note that the outcome of our decision would be the same under either party’s asserted skill level.” slip op. at 19
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“particularly relevant.” Resp. 14–15. First, Patent Owner argues that “a light emitting diode (LED) chip configured to output light at greater than about 40 milliwatts” means “at least one LED chip is capable of emitting light greater 9 Petitioner states that “Patent Owner thus contends the recited ‘reflective layers’ can include transparent or semi-transparent layers that exhibit some reflectivity (e.g., SiO2) or an interface between two layers (e.g., the buffer and substrate layers) that exhibit differing indices of refraction.” Pet. 20. Patent Owner frames this as being Petitioner’s “novel construction” (Resp. 16), but Petitioner does not expressly endorse this Patent Owner contention. than about 40 milliwatts.” Resp. 14–15. Patent Owner notes that a district court already adopted this construction and notes that the “LED chip” includes LEDs, LED modules, and LED arrays but excludes laser chips, laser modules, and VCSEL chips. Id. (citing Ex. 2003, 15–18). Petitioner argues that the phrase “needs no construction” and that Petitioner’s grounds meet this construction. Reply 1–2. We adopt Patent Owner’s proposed construction because it is well supported by the record including the District Court’s reasoning. Ex. 2003, 15–18. slip op. at 20
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“It is unnecessary to construe any other claim terms in this Decision because none of the parties’ disputes turn on the meaning of other claim terms. See, e.g., Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017).” slip op. at 22
Patent outcomesUS 6,465,961 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 6,465,961 - Samsung Electronics Co., Ltd. v. Memoryweb, LLCSome claims unpatentablePTAB · Jul 31, 2023 · IPR2022-00221 · APJ Lynne H Browne · IPR · Final written decision
Claims 1–13 are unpatentable under the stated obviousness grounds; claims 14 and 15 were not shown unpatentable.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner contends that a person of ordinary skill in the art at the time of the invention of the ’658 Patent would have had the following education and experience: (1) a bachelor’s degree in computer science, computer engineering, electrical engineering, or a related field, and (2) at least one year of experience designing graphical user interfaces for applications such as photo organization systems . . . Additional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education. Pet. 12 (citing Ex. 1003 ¶ 27). Patent Owner does not challenge this definition of the level of skill at this time. Prelim. Resp. 45. For purposes of this Decision, we also adopt Petitioner’s proposal as reasonable and consistent with the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“The ’658 Patent states, “Application Views–The Application Views utilizes the Application’s ability to associate Digital Tags to Digital Files and display them in customized views such as Uploads, Collections, Slideshow, Location, Timeline, Family Tree, People Profile, and Recipes.” Ex. 1001, 9:18–22. Thus, we understand “application view” to mean a customized display of digital tags or files and we adopt this definition of “application view.” Id. Turning to Patent Owner’s contention that the claim language requires the application view of be separate and distinct relative to other claimed views, we do not agree with Patent Owner’s sweeping statement. Rather, each claim must be considered to determine if the structure of the claim requires a view that is separate and distinct from the application view or if the claim further defines the application view.” slip op. at 14
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Further, we do not agree with Patent Owner that Petitioner’s proposed claim construction “allows an infinite number of intervening events.” PO Sur-reply 3. Rather, Petitioner’s position, as supported by Dr. Greenspun’s testimony, is that “ a POSITA would have recognized that the term ‘responsive to’ merely requires that the second event happen ‘subsequent to’ the first event based on a combination of user interaction and software implementation.” Pet. Reply 4 (citing Ex. 2022, 42:21–44:22; Ex. 2024, 108:20–109:12; Ex. 1047 ¶ 7). We credit Dr. Greenspun’s testimony regarding claim construction for “responsive to a click or tap” and adopt this definition as our own. Ex. 1047 ¶¶ 7–11.” slip op. at 18
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundMotivation not foundMixed
“Although, we agree with Patent Owner, that Petitioner does not dispute that in its second combination Okamura’s cluster maps and their associated geographic information would be lost, we do not see how this observation renders the proposed combination untenable. Petitioner has shown how the proposed combination meets limitations [1b]–[1g] of claim 1. Pet. 26–28, 37–56. To the extent that Patent Owner’s arguments regarding the Petitioner’s first proposed combination apply to its second proposed combination, those arguments are unconvincing for the reasons discussed above. In particular, we determine that the benefits of “better managing digital content” and an enhanced user experience “by providing ‘a good view of what location is associated with what’” outweigh any loss of geographical information. See Pet. 22–30. For these reasons, we determine that Petitioner has shown by a preponderance of the evidence that the combined teachings of Okamura and Belitz as combined in Petitioner’s second combination would have rendered displaying of first and second location selectable thumbnails as required by limitations [1b]–[1g] obvious to one of ordinary skill in the art at the time of the invention.” slip op. at 40
Patent outcomesUS 10,423,658 mixedClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,423,658 - Fitbit LLC v. Philips North America LLCSome claims unpatentablePTAB · Oct 4, 2021 · IPR2020-00910 · APJ Norman H Beamer · IPR · Final written decision
Claims 1, 7–10, 13, 15, 16, 22, and 24–26 are unpatentable; claim 14 is not shown unpatentable because the cited grounds do not establish separate data input/output ports.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Although the respective positions are very similar and our analysis would be the same under either Patent Owner’s or Petitioner’s definition of the ordinarily skilled artisan, from our review of the record, we find Patent Owner’s more specific articulation of the relevant experience is appropriate and consistent with the disclosure of the ’233 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Thus, we adopt Patent Owner’s description.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“obviousness challenges, we are not persuaded by Patent Owner’s arguments based on its characterizations of the plain meaning of “security mechanism governing information transmitted between the first personal device and the second device.” The ’233 patent explicitly discloses that the use of passwords or encryption can be used to secure information transmitted between devices. Ex. 1001, 8:12–22, 13:25–67. The use of passwords or security keys certainly provides a form of “governing” of information transmitted between devices. We note that the courts in the Fitbit and Garmin cases have concluded likewise: [Patent Owner’s expert] provides minimal explanation for — and cites to no evidence in support of — his opinion that encryption ‘does not govern or control [the] transmission [of information]’ . . . [and] that opinion appears to conflict with the specification and claims. Ex. 1081, 25. [Patent Owner’s expert’s] conclusory opinion should not be afforded any weight. Ex. 2023, 14. We conclude that it is unnecessary to provide an explicit construction of the phrase at issue, and do not agree with Patent Owner that techniques such as the use of passwords or encryption fall outside of the scope of claim 1.” slip op. at 17
- Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Other
“directional communications module to transition from the powered-down state to the powered-up state.” Ex. 1001, 16:18–20. Petitioner proposes to construe this portion of the claim pursuant to 35 U.S.C. § 112 ¶ 6, including specifying the disclosed structure corresponding to the recited function as “components capable of providing a magnetic, mechanical, sound or ultrasound, infrared, or radio frequency signal, and structural equivalents thereof.” Pet. 21 (citing Ex. 1001, 14:15–60, 16:16–30; Paradiso Decl. ¶¶ 49–50). Petitioner, however, also states that “[t]he ’233 patent explains that the ‘means for signaling’ can be ‘a mechanical signal, such as throwing a switch or applying pressure to a pad.’” Pet. 83; see Ex. 1001, 14:35–36. Therefore, we are not persuaded that Petitioner’s proposed articulation of the corresponding structure is correct. In our Decision to Institute, we stated that it is sufficient for present purposes to note that the disclosed structure that performs the function recited in claim 26 includes a switch that turns the bi-directional communications module on and off. Dec. 12. Patent Owner agrees that such structure is encompassed by the “means for signaling. . .” of claim 26. PO Resp. 12. We reiterate for purposes of this Decision that it is sufficient to note that the disclosed structure includes a switch as described.” slip op. at 18
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“includes the claimed short-range bi-directional wireless communications module, and explains that this term is meant to “include premises and facility based wireless networks.” Ex. 1001, 5:57–65. Even though wireless communications modules necessarily have inputs and outputs, we preliminarily concluded, based on these disclosures, that the data input/output ports of claim 14 had to be separate from the “short-range bi-directional wireless communications module” of claim 1 — otherwise the requirement of data input/output ports in claim 14 would be superfluous. Dec. 38–39. See Mformation Techs., Inc. v. Research in Motion Ltd., 764 F.3d 1392, 1399 (Fed. Cir. 2014) (favoring a construction that does not render another limitation “superfluous”). Petitioner points out that there is no example disclosed in the ’233 patent that embodies claim 14 — i.e., no example in which two devices communicate with each other, both using a local area wireless LAW 330 module and a Data I/O port 160. Reply 7. Therefore, argues Petitioner, claim 14 should not be construed to cover subject matter not disclosed in the ’233 patent. Reply 9. However, as both Petitioner and Patent Owner point out, the ’233 patent discloses that both the personal medical device PMD 100 shown in Figure 2 and the medical device interface MDI 600 shown in Figure 4C can include both a wireless communication module 300 and data I/O ports 160, which provides support for claim 14, notwithstanding that the specific connections of components required by claim 14 are not explicitly illustrated. Reply 7–8; Sur-Reply 10–11; Ex. 1001, Fig. 2, 3:47–49, 54–55. Moreover, Petitioner admits that the example of Figure 3A, which uses wireless communication modules 300, “does not include a data I/O port like claim 14.” Reply 8 (emphasis added). This admission contradicts Petitioner’s argument that “wireless communications module” and “data input/output port” are two terms that refer to the same structure. Reply 9 (citing Applied Med. Res. Corp. v. U.S. Surgical Corp., 448 F.3d 1324, 1333 n.3 (Fed. Cir. 2006) (“[T]he use of two terms in a claim requires that they connote different meanings, not that they necessarily refer to two different structures”)). Accordingly, we maintain our preliminary conclusion as expressed in the Institution Decision that the data input/output ports of claim 14 are separate from the “short-range bi-directional wireless communications module[s]” of claim 1.” slip op. at 20
Patent outcomesUS 7,088,233 mixedClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,088,233 - Fitbit LLC v. Philips North America LLCSome claims unpatentablePTAB · Oct 4, 2021 · IPR2020-00783 · APJ Norman H Beamer · IPR · Final written decision
Claims 1, 7–10, 13, 15, 16, 22, and 24–26 are unpatentable; claim 14 was not shown unpatentable because the references did not disclose separate data input/output ports.
RulingsFinal written decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Although the respective positions are very similar and our analysis would be the same under either Patent Owner’s or Petitioner’s definition of the ordinarily skilled artisan, from our review of the record, we find Patent Owner’s more specific articulation of the relevant experience is appropriate and consistent with the disclosure of the ’233 patent and the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001); In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995). Thus, we adopt Patent Owner’s description.” slip op. at 12
- Expert testimonyOther
“From our review of the record, including the testimony of Petitioner’s expert Dr. Paradiso, we are persuaded that Petitioner has articulated sufficient reasoning with rational underpinning to support the reliance on the combinations of Jacobsen with Quy for Ground 4, Geva for Ground 5, and Reber for Ground 6. For each ground, Petitioner’s reliance on the tertiary references demonstrates that the particular features disclosed (Bluetooth, GPS, and a power button) were well known and readily incorporated into a Jacobson-type system, and that one of ordinary skill in the art would have been motivated to do so with a reasonable expectation of success. Patent Owner’s arguments are unpersuasive, not sufficiently taking into account that the test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference. In re Keller, 642 F.2d 413, 425 (CCPA 1981). Instead, the relevant issue is “what the combined teachings of the references would have suggested to those of ordinary skill in the art.” Id. “Combining the teachings of references does not involve an ability to combine their specific structures.” In re Nievelt, 482 F.2d 965, 968 (CCPA 1973). Moreover, as Petitioner points out, the fact that an asserted combination introduces “simultaneous advantages and disadvantages [] does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006).” slip op. at 42
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“From our review of the record, including the testimony of Petitioner’s expert Dr. Paradiso, we are persuaded that Petitioner has articulated sufficient reasoning with rational underpinning to support the reliance on the combinations of Jacobsen with Quy for Ground 4, Geva for Ground 5, and Reber for Ground 6. For each ground, Petitioner’s reliance on the tertiary references demonstrates that the particular features disclosed (Bluetooth, GPS, and a power button) were well known and readily incorporated into a Jacobson-type system, and that one of ordinary skill in the art would have been motivated to do so with a reasonable expectation of success. Patent Owner’s arguments are unpersuasive, not sufficiently taking into account that the test for obviousness is not whether the features of a secondary reference may be bodily incorporated into the structure of the primary reference. In re Keller, 642 F.2d 413, 425 (CCPA 1981). Instead, the relevant issue is “what the combined teachings of the references would have suggested to those of ordinary skill in the art.” Id. “Combining the teachings of references does not involve an ability to combine their specific structures.” In re Nievelt, 482 F.2d 965, 968 (CCPA 1973). Moreover, as Petitioner points out, the fact that an asserted combination introduces “simultaneous advantages and disadvantages [] does not necessarily obviate motivation to combine.” Medichem, S.A. v. Rolabo, S.L., 437 F.3d 1157, 1165 (Fed. Cir. 2006). Accordingly, we are persuaded that Petitioner has proved by a preponderance of the evidence that claim 13 would have been obvious over Jacobsen and Quy, that claims 24 and 25 would have been obvious over Jacobsen and Geva, and that claim 26 would have been obvious over Jacobsen and Reber.” slip op. at 42
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“Like for Grounds 4–6, we are persuaded that Petitioner has articulated sufficient reasoning with rational underpinning to support the reliance on the combination of Say and Gabai. Although Gabai is directed to an interactive toy, its disclosure relating to bi-directional wireless communications with a base communication unit is pertinent art— satisfying the criterion that “[a] reference is reasonably pertinent if, even though it may be in a different field from that of the inventor’s endeavor, it is one which, because of the matter with which it deals, logically would have commended itself to an inventor’s attention in considering his problem.” In re Klein, 647 F.3d 1343, 1348 (Fed. Cir. 2011) (quoting In re Clay, 966 F.2d 656, 659 (Fed. Cir. 1992)). Accordingly, we are persuaded that Petitioner has proved by a preponderance of the evidence that claims 15, 16, and 22 would have been obvious over Say and Gabai.” slip op. at 44
Patent outcomesUS 7,088,233 mixed§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,088,233 - Apple, Inc. v. Uusi, LLC D/B/A NartronSome claims unpatentablePTAB · Aug 4, 2020 · IPR2019-00358 · APJ Minn Chung · IPR · Final written decision
Claims 94, 96, 101–106, 115, and 116 are unpatentable as obvious; claims 37–39, 97–99, and 107–109 were not shown unpatentable.
RulingsFinal written decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314(a), which requires demonstration of a reasonable likelihood that Petitioner would prevail with respect to at least one challenged claim, we instituted an inter partes review of the challenged claims. Paper 12 (“Inst. Dec.”). In the Institution Decision, we determined Petitioner demonstrated a reasonable likelihood that it would prevail as to at least one 1 As discussed below, we agree with Patent Owner that claim 117 is not challenged in this proceeding. challenged claim, and we instituted trial on all claims and all grounds in the Petition. Inst. Dec. 67–68.” slip op. at 2
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMixed
“The ‘183 patent grew out of a “study” which the inventor performed to determine the optimal scan frequencies for close-proximity touch arrays. The ‘183 patent describes this study, and then reports its conclusion: “higher frequencies” are optimal. The ‘183 patent’s “switching circuit” incorporates the “use of higher frequencies,” as suggested by the study.” slip op. at 36
Patent outcomesUS 5,796,183 mixed§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 5,796,183
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.