• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Jul 22, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Remand

  On remand, the Board maintained its finding that claims 2 and 17 are unpatentable under §103 over Diekmann and Ma, and Suzuki and Ma.

  RulingsRemand decision

  • RemandDecided for petitioner

    “that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Dependent claims 2 and 17 require an electron transport layer (ETL) that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “that is both n-doped and comprised of 8-hydroxy-quinolinolato-lithium (Liq). The district-court defendant’s first invalidity challenge relied primarily on Clix2, which lacked an n-doped ETL. Paper 48, 2, Paper 50, 3. Thus, the asserted combination required modifying Clix2’s non-doped ETL by adding an n-dopant. Clix2’s missing n-doped ETL appeared to be a focus at trial. See Ex. 2034, 917:1–18, 920:8–14. Here, in contrast, Petitioner proposed a more modest modification to materially different primary references, Suzuki and Diekmann, which both already have n-doped ETLs. See Paper 50, 2–3; Paper 54 8–9. As we explained in our Final Written Decision, because Patent Owner did not contest that Liq acts as an n-dopant in Ma, Petitioner’s combinations were obvious because they merely “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Paper 54, 12. That simple-substitution analysis would not be the same when n-doping Clix2’s non-doped ETL. For this reason, we agree with Petitioner that the district-court Clix2-based combination “is a different combination with a materially different motivation-to-combine analysis,” as compared to the Diekmann/Suzuki and Ma combinations that are at issue here. Paper 50, 3.” slip op. at 2

  Patent outcomesUS 11,828,425 unpatentable
  § 103 obviousness
  Patents in suitUS 11,828,425
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01222 · APJ Garth D Baer · IPR · Final written decision

  Claims 34–37 and 40–46 are unpatentable as obvious over the Yamazaki-based and Weaver-based grounds.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportDecided for petitioner

    “Patent Owner bears the burden of production to establish that its claimed invention is entitled to an earlier priority date for this fact-intensive issue. See In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1375–76 (Fed. Cir. 2016). We agree with Petitioner that the email chain does not support Patent Owner’s conception claim because it “does not discuss depositing a planarization layer, as required by both independent claims.” Pet. Reply 3. Patent Owner asserts that the inventor’s discussion of “PML” (polymer multi-layer) encapsulation in the email chain shows their conception of the claimed planarization layer because the ’389 patent describes that PMLs “‘[t]ypically’ include[e] ‘a planarization layer’ that ‘is provided to give a planar surface’ for deposition of an upper layer,” and “‘address ‘any point defects (i.e. pin holes)’ that might appear in the barrier layer’s surface.” PO Resp. 6 (quoting Ex. 1001, 1:31–37, 1:41–44, 1:56–62). We disagree with Patent Owner for two reasons. First, the challenged patent’s specification does not corroborate that the inventors conceived the claimed planarization before the challenged patent’s priority because it did not exist at the time of the email. Whether the inventors, at the time of filing, considered PMLs to typically include a planarization layer as of the claimed priority date does not support the allegation that they conceived of that same planarization layer more than a year earlier. Moreover, the ’389 patent’s teaching that “[t]ypically, for PML structures, a planarization layer 106 is formed” (Ex. 1001, 1:30–31) shows that the inventors recognized PML structures and planarization layers were distinct because only a subset of PML structures formed planarization layers, even if they do so typically. Thus, the inventor’s discussion of a PML layer in the email chain does not evidence their conception of the claimed planarization layer, as Patent Owner contends. Additionally, even if we were to understand the inventors’ mention of PML encapsulation in the emails, together with the discussion of patterning techniques for an organic layer, as discussing a planarization layer, such discussions are evidence of brainstorming ideas, rather than documenting the path taken with the claimed invention. For instance, the inventors use phrases like “don’t know if this will work,” “these are all just ‘undeveloped’ ideas,” and “looking forward to keep this discussion rolling.” Ex. 2006, 1; see also Ex. 1034, 59:22−59:18. As Petitioner argues, and we agree, these are more theoretical and future-development discussions than an exchange of a definite idea. Pet. Reply 2−3 (citing Hybritech Inc. v. Monoclonal Antibodies, Inc., 802 F.2d 1367, 1376 (Fed. Cir. 1986). For these reasons, we agree with Petitioner that Patent Owner has not” slip op. at 6

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Applicant-admitted prior artDecided for petitioner

    “B. Whether Petitioner Relies on Applicant Admitted Prior Art Patent Owner asserts we should “not consider” Yamazaki-based challenges because Petitioner included Applicant Admitted Prior Art (AAPA) in those grounds. See PO Resp. 16 (citing Qualcomm Incorporated v. Apple Inc., 134 F.4th 1355 (Fed. Cir. 2025)) (holding that AAPA may not be part of the basis for an inter partes review). We disagree. As Petitioner notes, it “utilizes the AAPA in the alternative with Ghosh, to show that it was known to manufacture OLED devices in bulk (which [Patent Owner] does not dispute).” Pet. Reply 9. Because “[t]he Petition identifies disclosures in Ghosh that independently demonstrate the same teachings for which the AAPA is cited,” we agree with Petitioner that it does not improperly rely on AAPA for any of its challenges. Id.” slip op. at 8

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “C. Whether Yamazaki, Weaver, and Palanisamy Are Printed Publications under 35 U.S.C. § 311(b) Patent Owner asserts that Yamazaki, Weaver, and Palanisamy do not qualify as printed publications under 35 U.S.C. § 311(b) because they only qualify as prior art under § 102(e). PO Resp. 17. According to Patent Owner, “[e]ven though the Federal Circuit has held that such references are ‘printed publications’ under 311(b), to preserve arguments on appeal, Patent Owner submits that such an interpretation is inconsistent with the plain statutory language, the precedent, and non-public accessibility of an unpublished patent application.” Id. We disagree with this argument because the Federal Circuit has rejected it, as Patent Owner acknowledges. See Lynk Labs, Inc. v. Samsung Electronics Co., 2023-2346, Slip. Op. (Fed. Cir. Jan. 14, 2025).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Yamazaki does not involve multiple devices on a substrate” and Ghosh teaches “non-selective deposition of at least the barrier layer.” PO Resp. 31. We disagree with this argument because it attacks Yamazaki and Ghosh individually, rather than the combination of Yamazaki’s selective deposition and Ghosh’s plurality of devices that Petitioner asserts. See In re Keller, 642 F.2d 413, 426 (CCPA 1981). We also disagree with Patent Owner’s criticism that Petitioner fails to explain why skilled artisans would have ignored Ghosh’s non-selective deposition method for barrier layers on multiple devices. PO Resp. 32. This argument attacks a straw man as Petitioner does not propose modifying Ghosh’s method with Yamazaki’s selective deposition. See Pet. 21–23. Rather, Petitioner proposes modifying Yamazaki’s selective deposition method by applying it to Ghosh’s teaching of encapsulating a plurality of OLED devices. Id. Next, Patent Owner asserts that skilled artisans would not have extended Yamazaki’s single-device fabrication/encapsulation method to a plurality of devices on a substrate because doing so would “multiply defects and errors, drop the yield exponentially, and increase the cost.” PO Resp. 34. Patent Owner asserts that precision/defect problems would be particularly acute when using Yamazaki’s inkjet method to print devices’ electro luminescence layers. Id. at 35–36. We disagree. Even if extending Yamazaki’s method to Ghosh’s multiple devices comes at a cost of potential defects, that tradeoff would not undermine Petitioner’s proffered combination given Petitioner’s articulated benefits outline above, including facilitating manufacturing display panels for OLEDs with improved throughput, improved productivity, and reduced manufacturing costs, as compared to fabricating/encapsulating just a single device. See Winner Int’l Royalty Corp. v. Wang, 202 F.3d 1340, 1349 n.8 (Fed. Cir. 2000) (“The fact that the motivating benefit comes at the expense of another benefit, however, should not nullify its use as a basis to modify the disclosure of one reference with the teachings of another.”). It also does not matter that “inkjet printing yielded devices of half the efficiency than spin coating,” as Patent Owner asserts (PO Resp. 35), because Petitioner does not need to show that Yamazaki’s inkjet printing would be the best option for batch fabrication/encapsulation, only that it would was a suitable one from which the prior art did not teach away. See Par Pharm., Inc. v. TWi Pharms., Inc., 773 F. 3d 1186, 1197–98 (Fed. Cir 2014). That is, Petitioner does not need to show that Yamazaki’s inkjet method was an improvement over other known fabrication/encapsulation methods, so long as it was a known fabrication/encapsulation method and skilled artisans would understand that implementing it for a plurality of devices had known advantages over fabricating/encapsulating a single device, which Petitioner identifies. See Pet. 22. We also agree with Dr. Subramanian that skilled artisans would have a reasonable expectation of success in making the proposed combination given similarities between the references (both are directed to encapsulation of an OLED display device with multiple thin-film layers and at least the first encapsulation is selectively deposited) and because “as the ’389 patent admits, in the prior art it was conventional to use batch fabrication to manufacture OLED display devices with thin-film encapsulation.” Ex. 1003 ¶ 86. As Dr. Subramanian explains, a particular advantage of inkjet printing is that it scales well to larger areas and it was known at the time of the ’389 patent that inkjet could be used to print multiple devices on a glass substrate. Ex. 1032 ¶¶ 2, 27–28. Patent Owner’s argument that “Yamazaki’s methods are far from ready for manufacturing” (PO Resp. 34) goes well beyond what is necessary to show that skilled artisans would have had a reasonable expectation of achieving what is claimed. See Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1367 (Fed. Cir. 2016). Given Petitioner’s analysis outlined above, we agree with Petitioner that it would have been obvious to skilled artisans to fabricate and encapsulate multiple OLED devices on a substrate using Yamazaki’s ink-jet methods. slip op. at 15

  Patent outcomesUS 6,949,389 unpatentable
  § 102 anticipation§ 103 obviousnesscites KSR
  Patents in suitUS 6,949,389
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentable
  PTAB · Feb 17, 2026 · IPR2024-01187 · APJ Garth D Baer · IPR · Final written decision

  Claims 1, 2, 8–11, and 16 are unpatentable as obvious over Ingle and Hasei; claims 3, 5, and 6 were not shown unpatentable because the Hanamura-based grounds lack the claimed trench.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “isolation, rather than in the claims’ context, and in light of the ’492 patent’s specification. In the trench/layers context of the ’492 patent, the word in requires more than it does in the circle/square context.” slip op. at 6

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “a bachelor’s degree in Electrical Engineering, Physics, or a comparable field of study, and at least three years of research or industrial experience with semiconductor (organic or inorganic) optoelectronic devices and/or lighting or displays. An individual with additional education could have less research or industrial experience and vice-versa. Pet. 9. Patent Owner does not dispute Petitioner’s proposed definition. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “rather than the combination of Ingle’s capacitor and Hasei’s droplet discharge application that Petitioner asserts. See In re Keller, 642 F.2d 413, 426 (CCPA 1981). Even if Ingle falls short of teaching structured application for its capacitor’s cathode, as Patent Owner argues, that does not undermine Petitioner’s challenge because Petitioner proposes using Hasei’s structured application (i.e., a droplet discharge device) to form the cathode of Ingle’s capacitor. See Pet. 24–25. Patent Owner’s additional argument that “Hasei contains no discussion of forming capacitors” (PO Resp. 36; see PO Sur-reply 17–18) is similarly flawed—it attacks Hasei individually, while ignoring Ingle’s capacitor teaching. We agree with Petitioner—the combination of Ingle and Hasei teaches structured application of the capacitor’s cathode. In addition, we disagree with Patent Owner that “Petitioner provides no reason why a POSITA would have extended Hasei’s method for producing its OLED to a capacitor.” PO Resp. 36; see PO Sur-reply 17 (asserting “pure conjecture”). To the contrary, as noted above, Petitioner explains, with relevant support from Hasei, that its structured application method reduced electrode-material waste and shortened manufacturing times as compared to photolithography. Pet. 25 (citing Ex. 1007 ¶¶ 5, 7). Given those benefits, Petitioner has articulated sufficient reasoning with rational underpinning to support that its proffered combination would have been obvious. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 13

  Patent outcomesUS 9,257,492 mixed
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 9,257,492
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Feb 9, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision

  Claims 2, 4, 9–12, and 17 are unpatentable under § 103 because the prior-art combinations teach the claimed features and have adequate motivation and reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art “would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 12

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “1. Whether Ma Qualifies as a Prior Art Printed Publication First, Patent Owner argues that Petitioner has not demonstrated that Ma was publicly accessible in August 2008 so as to qualify as prior art. PO 11 As Petitioner notes, the district court adopted a claim construction requiring only “one or more wavelengths” in the infrared-to-UV spectrum. PO Resp. 26 (citing Ex. 2031, 47–48). Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 10

  Patent outcomesUS 11,828,425 unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 11,828,425
• Solaris Oilfield Site Services Operating, LLC / Solaris Oilfield Site Services Personnel, LLC v. Masaba, Inc.All claims unpatentable
  PTAB · Jan 26, 2026 · IPR2024-01179 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–25 are unpatentable under § 103 over the asserted combinations of Waldner, Dynatek, and additional references; the Board cancelled all challenged claims.

  RulingsFinal written decision

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “Also, to the extent Masaba relies on extrinsic expert testimony, we note that Masaba’s expert cites absolutely no support for his understanding of the claims, much less explains why we should adopt his understanding over the plain and ordinary meaning of “conveying aggregate” and “moving aggregate.” See Ex. 2004 ¶ 34. Absent supporting citations, such extrinsic testimony is entitled to little, if any, weight. As such, we reject the notion that Waldner’s discharge chute member 242 is not a conveyor “for conveying aggregate” or “for moving aggregate,” as required by claim elements 1[h] and 1[i].” slip op. at 21

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “We disagree that Dr. Durham does not possess the necessary level of skill in the art to qualify as an expert in this case. Looking at the specification of the ’689 patent and the prior art of record, we think Masaba sets the bar too high. We acknowledge that one of ordinary skill in the art should have some education and/or experience in the mechanical art of conveying aggregate materials, but we do not think opining on the ’689 patent and asserted prior art necessarily requires that person to have the amount of education and experience that Masaba advocates. The ’689 patent relates generally to an “aggregate transferring system for receiving aggregate from a vehicle and elevating the aggregate to a higher vertical level for deposit into, for example, a silo.” Ex. 1001, 1:15– 18. And, as described in the ’689 patent and discussed later, the transferring system is an assembly of known types of conveyors, such as a belly-dump truck conveyor, a bucket elevator, and an articulated belt conveyor, for transferring the aggregate horizontally and vertically from a belly-dump truck to the discharge point, such as a silo. Without doubt, Dr. Durham has enough education and experience to reliably opine on the combination of known parts.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Plain and ordinary meaningNo construction needed

    “We reject this argument for several reasons. First, nowhere does the plain language of the claims specify how the aggregate is conveyed or moved from the conveyor extension assembly’s inlet to its outlet, be it passively by means of gravity or actively by means of a conveyor belt. Instead, the claims simply use those verbs according to their plain and ordinary meaning, which is “to transfer or deliver” or “to cause to go or pass” from one place to another. See Ex. 3001, 253 (defining “convey”), 760 (defining “move”).10 Second, the specification of the ’689 patent similarly uses these terms in a plain and ordinary sense, without ever attributing to them some sort of special meaning. See, e.g., Ex. 1001, 4:9–12 (“The apparatus 10 is suitable for performing the transfer of aggregate from 10 We reference the original pagination of the dictionary in which these definitions appear. one location to another, such as, for example, from a vehicle carrying the aggregate to a silo 1 for storing the aggregate.”). The ’689 patent specification also makes clear that active conveyance of the aggregate is an option and not a requirement of the claimed invention, stating that the conveyor extension assembly “may further include a conveyor belt 150.” Ex. 1001, 10:60–66 (emphasis added). Limiting claim elements 1[h] and 1[i] to a device “for actively conveying” or “for actively moving aggregate” would improperly import limitations from the specification into the claims. Thus, based on the intrinsic evidence, we determine that claim elements 1h and 1k are properly construed to encompass passive and/or active movement of the aggregate via the conveyor extension assembly.” slip op. at 20

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Not reached

    “Owner asserts” that two claim terms—“unloader structure” and “trailer structure”—should be construed as means-plus-function limitations under 35 U.S.C. § 112(f), Solaris submits an express construction detailing the corresponding structure in the specification for performing the recited function of the claimed unloader and trailer structures. See id. at 24–25. Only in disputing Solaris’s Ground 3 does Masaba advocate that the claim term “trailer structure” should be construed under § 112(f), and then only in conjunction with dependent claims 3 and 21. See PO Resp. 58. As such, we address Masaba’s proposed construction in our analysis of Ground 3. We now turn to Solaris’s grounds of unpatentability.” slip op. at 12

  Patent outcomesUS 11,780,689 unpatentable
  Claim construction§ 103 obviousnesscites KSR
  Patents in suitUS 11,780,689
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.Some claims unpatentable
  PTAB · Jan 22, 2026 · IPR2024-01094 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1, 2, 6, and 8–14 are unpatentable as obvious over Ma; claims 3 and 4 were not shown unpatentable over Werner.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends: A person of ordinary skill in the art (“POSA”) at the time of the alleged invention of the ’223 patent would have had a university degree in chemistry and additional expertise or a second university degree in the field of electrical engineering, particularly optoelectronics, or alternatively a university degree in electrical engineering and additional expertise or a second university degree in the field of chemistry. The person of ordinary skill in the art has spent several years studying the structure and function of organic optoelectronic components, in particular OLEDs, and has detailed knowledge of the chemical structure of light-emitting organic layers and the transport of charge carriers to these layers. In this respect, the person of ordinary skill in the art works at the interface between electrical engineering/physics (charge carrier transport and light emission processes in optoelectronic components) and chemistry, in particular organic chemistry (materials and layer stack combinations suitable). Pet. 14 (citing Ex. 1003 ¶¶ 46–47). Patent Owner does not dispute Petitioner’s contention. See generally Resp. Neither party indicates that the result would change depending on the definition selected. We adopt Petitioner’s uncontested proposed definition, because it is consistent with the disclosures of the asserted prior art references. See Ex. 1005, (code 57); Ex. 1007, 8107 (abstracts of the references asserted in the patentability challenges).” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “history pertaining to the patent.” 37 C.F.R. § 42.100(b). Under that standard, claim terms generally are given their plain and ordinary meaning as would have been understood by the ordinarily skilled artisan at the time of the invention and within the context of the entire patent disclosure. See Phillips v. AWH Corp., 415 F.3d 1303, 1313 (Fed. Cir. 2005) (en banc). We construe claim terms only as relevant to the parties’ contentions and only to the extent necessary to resolve the issues in dispute. See Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999); Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017). Neither party indicates that an express construction for any claim term is necessary to resolve the disputes at hand. Pet. 15; see generally Resp. On this record, we determine that no claim term requires express construction for purposes of this Decision. In our analysis of the challenges, however, we discuss the meaning of the terms “metal complex” and “central metal atom,” which appear in claim 1 (Ex. 1001, 19:19–20) to the extent necessary to resolve Patent Owner’s contention that Petitioner fails to establish that Ma invalidates claim 1. See Resp. 53, 56–58.” slip op. at 9

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Whether Ma qualifies as a “printed publication” involves an inquiry into the facts and circumstances surrounding the reference’s disclosure to members of the public. In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004). A reference is considered “publicly accessible” upon a satisfactory showing that the document has been “disseminated or otherwise made available to the extent that persons interested and ordinarily skilled in the subject matter or art exercising reasonable diligence[] can locate it.” Kyocera Wireless Corp. v. ITC, 545 F.3d 1340, 1350 (Fed. Cir. 2008); see Hulu, LLC v. Sound View Innovations, LLC, IPR2018-01039, Paper 29, 10– 11 (PTAB Dec. 20, 2019) (precedential).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Based on the information presented, we find Petitioner has the better position. Patent Owner admits that joint vaporization means “two materials vaporize together.” Reply 21 (quoting Resp. 54). As Petitioner argues, “This is what Ma discloses.” Id. We agree with Petitioner that Ma describes a “two-component” electron transport layer having a “thickness with one value.” Id.; see Ex. 1007, 811 (reporting a “co-deposited” application of “BPhen:LiQ” that is “50 nm thick”). Ma’s disclosure, thereby, strongly “indicates that the two components were vaporized together––as opposed to creating a ‘macroscopically homogenous form’” prepared by sequentially vaporizing the individual components as Patent Owner “hypothesizes.” Reply 21 (citing Ex. 1020 ¶¶ 42–44; Ex. 2041 ¶¶ 155–157); see Resp. 54– 55; see also Ex. 1007, 811 (Ma’s description of its device fabrication, appearing in the third paragraph of the experiments section). Petitioner further advances evidence that “[p]reparing a layer that is ‘macroscopically homogeneous’ but potentially microscopically heterogeneous,” as Patent Owner postulates, “would introduce excessive variability and render the data noncomparable and unreliable, thus undermining the experiment’s purpose.” Reply 21 (citing Ex. 1020 ¶ 44); see Resp. 54–55. Patent Owner presents no counterargument or evidence that is persuasive to undercut Petitioner’s reasoning or evidence on that point. See Sur-reply 19–22. Petitioner also argues that an ordinarily skilled artisan would have recognized “that vaporizing materials together would best achieve Ma’s objective of assessing the current density using different Liq doping percentages.” Reply 22 (citing Ex. 1007, 811; Ex. 1020 ¶ 51). Here again, Petitioner’s evidence on point stands uncontested. See Sur-reply 19–22 (declining to contest that point). On this record, therefore, we agree with Petitioner that, as to the relevant disclosure in Ma, “the most natural interpretation of ‘co-deposition’ for forming a layer, particularly when there is nothing to indicate that the materials” are “vaporized sequentially,” is that the materials are co-deposited by joint vaporization. Reply 22 (citing Ex. 1020 ¶ 46–51). We further agree that, “[u]nder a preponderance standard, Ma’s disclosures are sufficient to render joint vaporization at least obvious.” Id. For the above reasons, we determine that Petitioner demonstrates by a preponderance of the evidence that Ma discloses joint vaporization as required by the challenged claims.” slip op. at 15

  Patent outcomesUS 8,558,223 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 8,558,223
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Jan 22, 2026 · IPR2024-01093 · APJ Grace Karaffa Obermann · IPR · Final written decision

  Claims 1–16 are unpatentable: claims 1–13 and 15–16 on anticipation and obviousness grounds, and claim 14 on obviousness over Choulis.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A person of ordinary skill in the art (“POSITA”) at the time of the alleged invention of the ’164 patent would have had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices. An individual with additional education could have less research or industrial experience and vice versa. Pet. 12. Patent Owner repeatedly refers to “a POSITA” without addressing the definition of that term or contesting Petitioner’s proposed definition. See Resp. 1, 2 n.1, 3, 8, 9, 15–21, 23, 26, 29, 32–33, 35, 37, 38, 40, 41, 44–49, 51–57, 61, 62 (bare references to “a POSITA”). Neither party indicates that the ultimate result on patentability would change depending on the definition selected. We adopt Petitioner’s proposed definition, which is not contested, because it is consistent with the disclosures of the asserted prior art. See Ex. 1004, (code 57); Ex. 1006, code (57); Ex. 1008, code (57); Ex. 1009, code (57) (abstracts of the references asserted in the patentability challenges).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundTerm construed board ownDecided for petitioner

    “because no information raised during the trial phase of this review changes the calculus: First and foremost, the plain terms of claim 1 include no language from which we reasonably can impose limits on the phrase “matrix material” as urged by Patent Owner. In addition, the specification includes no special definition of that phrase that supports importing Patent Owner’s proposed narrowing limitation into the claim. Furthermore, we are directed to no disclaimer of claim scope during patent prosecution that would support Patent Owner’s twice-rejected argument that the phrase “matrix material” in claim 1 excludes embedded dopants and dispersed agglomerations. And the extrinsic evidence advanced by Patent Owner during this review is ineffective to override the clear interpretation of “matrix material” that is established by the intrinsic evidence. Reply 1–7.10” slip op. at 8

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “We find that Petitioner establishes by a preponderance of the evidence that Choulis anticipates claim 13. We agree with Petitioner, in that regard, that Choulis explicitly teaches “using spin-coating as a method for depositing materials, which involves a simultaneous application process” as required by claim 13. Reply 16 (citing Pet. 40–41; Ex. 1044 ¶ 45).16 We 15 Petitioner raises Djobo as a background reference supporting that Choulis anticipates deposition of PVK by evaporation. Pet. 41. Patent Owner counters that Djobo, to the contrary, shows that Choulis does not teach deposition of PVK by evaporation. Resp. 48. In other words, both parties cite Djobo in connection with the ground based on anticipation by Choulis. Against that backdrop, we determine that Patent Owner waives any argument that Petitioner improperly cites Djobo as a background reference in support of the anticipation challenge, which is based on Choulis alone. Resp. 48 (nowhere asserting that the challenge is deficient on that basis). That waiver arises because no argument, in that regard, is raised in Patent Owner’s Response see Inst. Dec. 34 (“The Board shall deemed waived any issue not raised by Patent Owner in a timely response to the Petition . . . .”). 16 Patent Owner’s statement that “spin coating tends to cause phase separation” is not developed adequately on this record and, therefore, is further agree with Petitioner that Patent Owner “has not contested this point.” Resp. 48. “Therefore, there is no genuine dispute regarding the unpatentability of claim 13,” although Patent Owner raises “arguments concerning evaporation, which is a distinct process from spin-coating” relevant to the additional limitations of claim 14. Reply 16. We determine that Petitioner establishes by a preponderance of the evidence that Choulis anticipates claim 13. Patent Owner, however, has the better position on whether Choulis anticipates claim 14, which “includes the requirement of applying matrix materials via evaporation coating.” Reply 16. Petitioner seems to abandon that challenge in the Reply by raising arguments that appear, on this record, to bear exclusively on whether the subject matter of claim 14 would have been obvious over Choulis.17 Id. at 16–17. Those arguments are insufficient to counter Patent Owner’s reasons why Choulis does not anticipate the “evaporation coating” limitation of claim 14. Compare id., with Resp. 48. On this record, therefore, we determine that Petitioner does not establish by a preponderance of the evidence that Choulis anticipates claim 14. unpersuasive to persuade us “that Choulis does not have three matrix materials.” Sur-reply 15. That argument runs counter to Choulis’s explicit, intrinsic disclosures, which illustrate (Ex. 1004, Fig. 4) and describe (id. ¶ 30) an organic light emitting layer composed of three matrix materials. See Pet. 24–25 (citing Ex. 1004, Fig. 4, ¶ 30); see also Ex. 1003 ¶¶ 85–88 (persuasive declaration testimony of Dr. Holmes, cited at Pet. 24–25). 17 There is some confusion on this point, given that both parties sometimes collapse, into a single argument, whether Choulis anticipates or renders obvious claim 1. Compare Resp. 48, with Reply 16–17.” slip op. at 35

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “On this record, therefore, we determine that Choulis, at minimum, suggests that a person of ordinary skill in the art at the time of the invention would have recognized PMMA as a suitable alternative to PVK in Choulis’s Figure 4 embodiment, notwithstanding any differences raised by Patent Owner. Ex. 1004 ¶ 44. Patent Owner’s argument that no disclosure in Choulis suggests that an ordinarily skilled artisan “would have found it desirable to use PMMA in place of PVK in Choulis’s devices” misses the mark, where Choulis includes both PMMA and PVK in lists of materials suitable for use as host or matrix materials. Resp. 38; Ex. 1004 ¶ 44. “Our caselaw is clear. It’s not necessary to show that a combination is ‘the best option, only that it is a suitable option.’” Intel Corp. v. Qualcomm Inc., 21 F.4th 784, 800 (Fed. Cir. 2021). Even if Choulis does not expressly disclose substituting PMMA for PVK in the Figure 4 embodiment, “an ordinarily skilled artisan would have found it obvious to make that substitution.” Reply 10 (citing Pet. 31 (citing Ex. 1003 ¶ 100; Ex. 1044 ¶ 23)). The suggestion for that substitution is set forth unambiguously in Choulis’s listing of both “PVK” and “PMMA” as materials suitable for use as a first “host” material in Choulis’s organic functional layer; that is, “the light emitting layer” that is “described above” in Figure 4. Ex. 1004 ¶ 44. ii. Alternative Reasoning for Replacing PVK with PMMA Patent Owner counterargues that using PPMA in place of PVK would have been understood to “upset the hole and electron balance,” as well as “affect hole-charge recombination,” and “degrade the performance of the resulting OLED system.” Resp. 37. Petitioner responds with evidence that “it would have been a routine task for” an ordinarily skilled artisan “to optimize the composition of each component within the light-emitting layer to achieve the desired charge balance.” Reply 11 (citing Ex. 1004 ¶ 24). Petitioner’s response brings to light a second reason why an ordinarily” slip op. at 40

  Patent outcomesUS 8,723,164 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,723,164
• Samsung Display Co., Ltd. v. Pictiva Displays International Ltd.All claims unpatentable
  PTAB · Jan 22, 2026 · IPR2024-01095 · APJ Garth D Baer · IPR · Final written decision

  Claims 2, 4, 9–12, and 17 are unpatentable under § 103 over the Diekmann- and Suzuki-based combinations with the respective secondary references.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “had a Bachelor’s degree in chemistry, physics, or a comparable field of study, and at least three years of research or industrial experience with organic optoelectronic light-emitting devices.” Pet. 10. Further, “[a]n individual with additional education could have less research or industrial experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s formulation. See generally PO Resp. We adopt Petitioner’s uncontested proposed definition because it is consistent with the disclosures of the asserted prior art. See, e.g., Ex. 1006, code (57); Ex. 1011, code (57).” slip op. at 7

  • BurdenUnpatentable

    “III. OBVIOUSNESS ANALYSIS Petitioner contends that claims 2, 4, 9–12, and 17 are unpatentable under 35 U.S.C. § 103. For the reasons explained below, we find that Petitioner has shown by a preponderance of evidence that these claims are unpatentable over the asserted prior art.” slip op. at 7

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “Resp. 16–24. We addressed this same issue in our Final Written Decision in IPR2024-01094. IPR2024-01094, Paper 42 at 9–13. As we explained there, Ma qualifies as prior art printed publication because the record evidence supports what Ma says on its face—that it was published online on August 29, 2008 by an Elsevier, an established publisher, in Synthetic Metals, which is a reputable journal. Id. For the same reason explained in IPR2024-01094, we agree with Petitioner that Ma qualifies as a prior art printed publication.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “additional feature in claims 2 and 12, Patent Owner raises a number of challenges to Petitioner’s asserted rationale for combining Ma. See PO Resp. 27–47. First, Patent Owner asserts that skilled artisans would not have used Ma’s Liq dopant in Diekmann/Suzuki because both employ electron-donor dopants that operate differently from Liq’s electron-hopping dopant. Id. at 28–31. We disagree with Patent Owner’s argument because it highlights a difference in the references’ dopants without identifying any incompatibility. Even if Diekmann and Suzuki teach electron-donor type ndopants as Patent Owner asserts, neither precludes or disparages Ma’s electron-hopping dopant. See In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004) (“The prior art’s mere disclosure of more than one alternative does not constitute a teaching away from . . . alternatives because such disclosure does not criticize, discredit, or otherwise discourage the solution claimed.”). As Petitioner explains, “Liq acts as an n-dopant in Ma,” which “increases ETL conductivity.” Pet. Reply 10. Patent Owner does not contest that Liq acts as an n-dopant in Ma. See Pet. Reply 30. Thus, Petitioner’s proposed combinations “substitute one known n-dopant for another to further the same goal of improving ETL conductivity.” Pet. Reply 10. Next, Patent Owner faults Petitioner for failing to show that using Ma’s Liq dopant in Diekmann’s/Suzuki’s ETL would result in lower diffusion or higher efficiencies as compared to Diekmann’s/Suzuki’s preferred n-dopants, which included cesium, barium, or lithium fluoride. PO Resp. 31–35; see PO Sur-reply 4–5. We disagree with Patent Owner’s argument because Petitioner does not need to show that Ma’s Liq n-dopant “was an improvement in a categorical sense” over Diekmann’s/Suzuki’s n-dopants, so long as Ma’s n-dopant was known and one skilled in the art would understand that implementing it had advantages. See Intel Corp. v. Pact XPP Schweiz AG, 61 F.4th 1373, 1381 (Fed. Cir. 2023) (quotation marks omitted); In re Fulton, 391 F.3d 1195, 1200 (Fed. Cir. 2004) (“[O]ur case law does not require that a particular combination must be the preferred, or the most desirable, combination described in the prior art.”). Petitioner does not assert skilled artisans would have used Liq because it was a superior to Diekmann’s/Suzuki’s preferred dopants, but because doping ETLs with Liq had known benefits including lower driving voltage and enhanced power efficiency from enhanced carrier injection increased transport conductivity, as compared to an undoped device. Pet. 37 (citing Ex. 1010, 813). That other potentially suitable or even superior n-dopants were also known does not make Liq nonobvious. Given Liq’s benefits outlined above, Petitioner has articulated sufficient reasoning with rational underpinning to support the legal conclusion that its proffered combination of Ma’s known dopant in Diekmann’s/Suzuki’s device would have been obvious to one skilled in the art. See KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 418 (2007).” slip op. at 11

  Patent outcomesUS 11,828,425 unpatentable
  § 102 anticipation§ 103 obviousness
  Patents in suitUS 11,828,425
• Weatherford U.S., L.P v. Halliburton Energy Services, Inc.Some claims unpatentable
  PTAB · Dec 9, 2025 · IPR2024-00990 · APJ Brent M Dougal · IPR · Final written decision

  Claims 11–12 and 14–20 are unpatentable; claims 1–10 and 21–23 are not shown unpatentable. Substitute claims 29–37 are unpatentable, and the motion to amend is denied as to them.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The level of skill is uncontested. Patent Owner adopts the level of skill identified by Petitioner as: [at] the time of the alleged invention in 2018, a POSITA[2] would have had a B.S. degree in mechanical or petroleum engineering or a similar technical discipline, with at least five years of experience in oil or gas well drilling, completion, and/or subsurface production operations or in technical support of such operations including at least some experience in unconsolidated formations utilizing sand control methods and means. Also,” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “on embodiments of Yeh with concentric sand screens having nine shunt tubes (six transport tubes and three packing tubes) (Yeh Figures 4A–B) and eccentric sand screens with four shunt tubes (two transport tubes and two packing tubes) (Yeh Figures 8A, 8C). See Pet. 32–37, 39, 41–43. Yet, Petitioner’s reasoning as to why “a higher-pressure shunt tube assembly necessitated greater wall thickness” rests on an unspoken one to one comparison between the shunt tubes of the different systems. See id.; see also Ex. 1003 ¶¶ 291–297 (Petitioner’s declarant comparing possible transport tubes of different pressure regions without considering or addressing any difference in the number of transport tubes). However, the embodiments relied on by Petitioner have different numbers of shunt tubes, and thus the greater wall thickness does not appear to be “necessitated” in the way inferred by Petitioner. Further, Petitioner’s analysis would seem to be most appropriate when comparing two concentric sand screens for different pressure regions, or two eccentric sand screens for different pressure regions. relies on Yeh’s teachings related to a horizontal well bore of 5000 feet for the “concentric screen → crossover tool → eccentric screen” arrangement, as well as, for why the concentric screen needs to be rated for a high pressure. Pet. 32–37, 39, 41–43. Petitioner also refers to these features for why one of skill in the art would combine the teachings of Yeh and Yeh2. Id. at 32. However, on cross-examination, Petitioner’s declarant agreed that it is concentric sand screens having a 6x3 shunt tube design that would provide the noted benefits of being rated for a higher pressure and being more robust (as relied on in the Petition), as compared to eccentric sand screens. Ex. 2013, 42:20–43:8; Sur-reply 4–5. This also exposes another issue with Petitioner’s arguments. Though Petitioner identifies that one of skill in the art would be aware that material choice, wall thickness, and pipe diameter all impact burst pressure of a pipe (Pet. 42 (citing Ex. 1017, 24 (Equation (14))), the Petition essentially ignores the fact that the claims do not require a single pipe in isolation. The claims require two shunt tube assemblies, each surrounding a base pipe within a wellbore. It is uncontested that a wellbore provides a confined space for such a system and thus any change in wall thickness of one pipe can result in a significant impact in the function of the other pipes. We find the testimony of Petitioner’s declarant (see, e.g., Ex. 1003 ¶¶ 290–297) unpersuasive when discussing wall thickness because it focusses on basic considerations of a standalone pipe, without sufficient consideration of the claimed completion assembly with its required pipe and tube structure. PO Resp. 20–26.” slip op. at 17

  • Strike new argumentNew argument disregardedDecided for patent owner

    “In response to Patent Owner’s argument concerning Yeh’s embodiments relied on in the Petition, Petitioner argues for the first time that Patent Owner’s declarant “conceded, Yeh discloses that both concentric and 47:19–48:21). Petitioner does not provide a citation to Yeh or a citation to where the Petition relies on the same number of shunt tubes between concentric and eccentric screens. The deposition cited by Petitioner discusses Yeh at column 16, lines 26 through 35. However, the Petition does not cite or rely on these teachings of Yeh. Thus, we decline to consider this late argument.4 See 35 U.S.C. § 312(a)(3) (requiring the petition to identify “with particularity . . . the grounds on which the challenge to each claim is based, and the evidence that supports the grounds”); 37 C.F.R. § 42.104(b)(5).” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentable

    “Thus, we agree with Petitioner that the combination of Yeh and Yeh2 teaches determining the shunt tube system operating pressures associated with the distal end of the production zone, but also more generally, determining the operating pressures along the entire production zone. With this knowledge of the system operating pressures, Petitioner argues that one of skill in the art would have selected eccentric screens for the distal end of the production zone “at any point at which the slurry pressure dropped below the pressure capacity of the eccentric screen shunt tubes.” Pet. 66 (citing Ex. 1005, 30:16–20; Ex. 1003 ¶ 388). In other words, knowing that the pressure decreases as you approach the toe, Yeh’s low-pressure rated eccentric screens could be used from some point prior to and covering the toe. determined pressure.” PO Resp. 37–38. We disagree. As discussed above, the record supports Petitioner’s position that one of skill in the art would have “understood the need to determine the shunt tube system operating pressure throughout the horizontal wellbore.” Ex. 1003 ¶ 383; see also Pet. 64–65. We find convincing Petitioner’s argument that one of skill with this understanding of the system pressures would select a shunt tube system rated to not only address the distal end, but also to address the needs of the adjacent region, so long as the pressure rating supported such a selection. See Pet. 65–67; Ex. 1003 ¶¶ 385–388.” slip op. at 22

  Patent outcomesUS 11,333,007 mixed
  Claim construction§ 101 eligibility§ 103 obviousness§ 112 disclosurecites Graham
  Patents in suitUS 11,333,007
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Dec 2, 2025 · IPR2024-01052 · APJ Brian D Range · IPR · Final written decision

  Claims 1, 2, 7–12, and 17–20 are unpatentable as obvious; claims 3–6 and 13–16 were not shown unpatentable because the asserted Watanabe combinations were unsupported.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “cameras.” Pet. 6 (citing Ex. 1002 ¶¶ 36–38). Petitioner further contends “[a]n advanced graduate degree in the disciplines cited above may make up for the work experience indicated above.” Id. Patent Owner does not dispute and applies Petitioner’s proposed level of skill. PO Resp. 6. We find that Petitioner’s proposal is reasonable and consistent with the ’832 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art). Thus, we apply Petitioner’s proposal in our analysis.” slip op. at 13

  • Prior constructionPrior construction adoptedDecided for petitioner

    “In our Institution Decision, we construed “determin[ing] a viewing window for the visual content as a function of progress through the progress length” as “requiring determining a viewing window for different times of the video.” Inst. Dec. 21. Neither party disputes this construction. PO Resp. 7; Pet. Reply 1–7. We maintain this same construction.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “Thomason are in the same field of endeavor. Thomason describes a camera and method for correctly orientating pictures from the camera. See, e.g., Ex. 1004 ¶¶ 1, 2 29–40, Figs. 3a–3b. In particular, Thomason is interested in rotating and cropping images to reduce the effect of poor orientation. Pet. 9 (citing Ex. 1004 ¶¶ 2, 34, 36). Pacurariu likewise describes aligning and resizing/cropping of a captured image to correct poor orientation. See, e.g., Ex. 1005 ¶¶ 1, 3, 45–56, Figs. 5A–5C. The preponderance of the evidence also supports that a person having ordinary skill in the art would have had reason to combine the Pacurariu’s teachings with Thomason to predictably improve Thomason. Thomason teaches correct rotation of video data and makes use of rotation sensor to correct rotated images. Pet. 19–21 (citing, e.g., Ex. 1004 ¶¶ 4, 27, 29, 35; Ex. 1002 ¶¶ 76–77). Pacurariu similarly uses sensors and measures tilt angle of the camera. Id at 21–22 (citing, e.g., Ex. 1005 ¶¶ 51–52, Fig. 6; Ex. 1002 ¶ 78). Pacurariu further teaches that its tilt data angle can be stored for each “video frame.” Id. at 22 (citing Ex. 1005 ¶ 52). Petitioner, with support from credible testimony of Dr. Katsaggelos, explains how the teachings of Thomason and Pacurariu could be successfully combined. Id. at 23 (citing, for example, Ex. 1002 ¶ 81). A person of ordinary skill in the art could have known that Thomason’s system could be improved by saving rotation data for each video frame and correcting images on a frame-by-frame basis. Id. at 23–24. The testimony of Dr. Katsaggelos is credible in this regard. Ex. 1002 ¶¶ 80–81. Petitioner and Dr. Katsaggelos explain the references’ teachings and, based on these teachings, assert that a person having skill in the art would have had reason to combine with reasonable expectation of success based on those teachings. Reason to combine may properly come from the references themselves. KSR Int’l Co., 550 U.S. at 418 (explaining reason to combine may come from “interrelated teachings of multiple patents”). Based on the evidence presented, Petitioner establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to combine the teachings of Thomason and Pacurariu with a reasonable expectation of success. Ex. 1002 ¶¶ 76–81, 89–92; Ex. 1004 ¶¶ 4, 8–9, 27, 29, 35; Ex. 1005 ¶¶ 26, 41, 46, 51–52, 55–57, Figs. 6, 7.” slip op. at 27

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for patent owner

    “evaluating nexus between the claimed invention and objective evidence of nonobviousness, also referred to as secondary considerations. Lectrosonics, Inc. v. Zaxcom, Inc., IPR2018-01129, Paper 33 at 33 (PTAB Jan. 24, 2020) (precedential). We first consider whether Patent Owner has demonstrated “that its products are coextensive (or nearly coextensive) with the challenged claims,” resulting in a rebuttable presumption of nexus. Id. at 33. If not, that “does not end the inquiry into secondary considerations”; “the patent owner is still afforded an opportunity to prove nexus by showing that the evidence of secondary considerations is the ‘direct result of the unique characteristics of the claimed invention.’” Id. (quoting Fox Factory, 944 F.3d at 1373–75).” slip op. at 62

  Patent outcomesUS 11,336,832 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,336,832

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.