- Clearcorrect Operating, LLC v. Align Technology Inc.No claims unpatentablePTAB · Sep 29, 2026 · IPR2025-00817 · APJ Kevin F Turner · IPR · Final written decision
Claims 1–20 were not shown unpatentable because the cited combinations did not teach or suggest partial insertion of new scan data into an existing 3D model.
RulingsFinal written decision- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable
“that Boerjes alone teaches or suggests limitation 1(h) by a preponderance of the evidence. Although the Petition is persuasive that Boerjes allows a user to “identify areas that need replacing, such as ‘a margin line’ to be removed, ‘areas of poor margin preparation,’ and ‘holes or areas of incomplete scan[s],’” and that the user can identify regions of a prepared tooth surface requiring additional preparations and “supplemental scanning” (Pet. 32 (citing Ex. 1004 ¶¶ 189, 193, 196)), Boerjes is silent with respect to replacing at least a portion of the removed surface portion of the model using the received second scan data of the patient’s teeth, per claim 1. Boerjes certainly contemplates the re-scanning of the dentition, but does not assert partial insertion of new data into an existing 3D model. We acknowledge that Petitioner has argued (Pet. 43–44) that Boerjes’ Figure 4 and paragraph 144 of Boerjes teach partial replacement, but we are persuaded that those disclosures suggest total replacement and not partial replacement. The reference to “supplemented or replaced with new scan data” (Ex. 1004 ¶ 199) does not necessarily teach or suggest partial scanning, as Petitioner has argued. Additionally, Petitioner has argued (Pet. “combining historical three-dimensional data” (quoting Ex. 1004 ¶¶ 139, 144, 163), would have suggested to ordinarily skilled artisans that “Boerjes would be used to replace at least a portion of the model with the new scan data. Id. at 45 (citing Ex. 1003 ¶ 112). These disclosures are, however, applicable to scans that create complete replacement as well as partial replacement. We remain persuaded that Boerjes does not teach partial scans used to obtain partial replacement. Even under the “comprising” language of claim 1, for example, the complete replacement of a 3D model cannot teach or suggest “replacing at least a portion of the removed surface portion” without repudiating the language of the claim by making a portion be the entire model. Even if, as Petitioner asserts, “removing portions of a virtual model has been a well-known and routine technique in 3D modeling,” and the “process of replacing a user-identified portion would have been well within the skills of a POSITA” (Pet. 35), the disclosure of Boerjes does not teach or suggest such processes. Although Boerjes allows for the possibility that portions of a model can be identified as needing replacement or supplementation, it does not disclose the partial replacement required by the instant, independent claims. Boerjes’s actual disclosure details that supplemental scanning is used to compensate for an inadequate scan, but such supplemental scanning is not disclosed to be used to stitch together before-and-after models that have undergone an intervening physical change.” slip op. at 15
Patent outcomesUS 10,791,936 not shown unpatentable§ 103 obviousnesscites KSRPatents in suitUS 10,791,936 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Jul 10, 2026 · IPR2025-00147 · APJ Linda E Horner · IPR · Final written decision
The Board found claims 1–6 and 8–20 not shown unpatentable under three obviousness grounds, principally because the proposed combinations did not establish a feasible curved battery or transparent potting encapsulating the components.
RulingsFinal written decision- Skill levelSkill level board ownOther
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶ 29). Petitioner also contends that a person of ordinary skill would have been “familiar with, e.g., sensor system design, including inertial and other motion sensor system design, and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 25. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’124 patent and the references cited in the Petition.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We need not reach the issue of whether the preamble is limiting for purposes of determining patentability of the challenged claims. Even were we to agree with Patent Owner that the preamble is limiting and the claims are limited to a finger-worn ring wearable computer device, Petitioner has relied on Schröder in each ground to disclose a “wearable computing device configured to be worn around a finger of a wearer.” Pet. 22 (Ground 1), 45 (Ground 2, relying on Yuen for adding the functionality of light sources with a photodetector, temperature sensors, and varying the sampling frequency of sensor data acquisition), 56 (Ground 3). We agree with Petitioner that Schröder discloses such a device. Thus, no explicit claim construction is necessary for this decision.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundNot shown unpatentableNot shown unpatentable
“We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position for several reasons. First, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “would have to be reduced in size on the 6 There is no Exhibit 2022 in the record of this case. magnitude of 5-10x from its current size to fit in a ring of Schröder.” Resp. 38 (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Second, Petitioner relies on evidence in the Reply that Petitioner failed to specifically identify in the Petition. Compare Reply 3–5 (citing Ex. 1369 ¶¶ 7–14; Ex. 1079 ¶¶ 47, 71; Ex. 2022, 138:7–143:1; Ex. 1002 ¶¶ 96, 337; Ex. 2021, 12–13, 307:7–17; Ex. 2020, 212:6–214:13; Ex. 1081, 130:18–131:14; Ex. 1010 ¶ 168), 9 (referring back to Section § II.B.2) with Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99; Ex. 1010 ¶¶ 157, 163, 168, 201, Fig. 6). More specifically, while the portion of Dr. Anthony’s Declaration cited in the Petition (see Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99)) mentions the Technology Background Section V of his Declaration (Ex. 1002 ¶¶ 42–147), neither Petitioner nor Dr. Anthony sufficiently explains what evidence supports his opinion that it was feasible to incorporate batteries or battery-like devices into finger-rings, or how a person of ordinary skill in the art would have miniaturized a curved battery for incorporation into Schröder’s ring. Ex. 1002 ¶ 196 (describing that rechargeable batteries powering wearable electronic devices were “well-known by 2013” and “had also undergone significant advances in terms of miniaturization and energy density [that] made it feasible to incorporate batteries or battery-like devices such as supercapacitors into smaller form factors, such as finger rings, without sacrificing functionality” such as “lithium-polymer (Li-Po) batteries and solid-state batteries.”). Moreover, some of Petitioner’s citations in the Reply appear to be incorrect as there is no Exhibit 2022 of record in this case, as noted above. These issues undermine the strength of Petitioner’s showing by making it difficult to follow its reasoning, much less identify where in the record that reasoning finds support. See DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”); United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”). Third, even considering Petitioner’s new Reply arguments and” slip op. at 27
- Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner
“We credit Dr. Mercier’s testimony over Dr. Anthony’s and agree that Dr. Anthony’s testimony fails to account for the constraints of a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶ 140. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’124 patent, we also have evidence that prior art “finger ring wearables up to the ’124 patent had used ‘coin’ type batteries.” Resp. 40 (citing Ex. 2018 ¶ 140). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would have looked to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 141. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura patent), Fig. 24; Ex. 2018 ¶¶ 74–84. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 85. We also agree with Dr. Mercier that Dr. Anthony’s testimony lacks evidence or a technical analysis of the power requirements for the various sensors he suggests including in a wearable device and the capacity of the proposed GMBPow battery. See, e.g., Ex. 1002 ¶¶ 94, 210, 214–17; Ex. 2018 ¶ 97. Moreover, Dr. Anthony does not address the issues with the batteries that are identified in the references he discusses. For example, Dr. Anthony does not address Lee’s disclosure that “direct coating of electrode slurry onto plain paper led to the occasional internal-shorting of the device due to the leakage of the electrode material through a large-sized hole in the paper.” Ex. 1019, 2415. In contrast, Dr. Mercier discusses the pitfalls the skilled artisan faced in developing finger-ring devices. See, e.g., Ex. 2018 ¶¶ 77–79 (discussing the issues Rhee’s and Asada’s large rings), 83 (identifying power requirements as a design constraint). For example, Dr. Mercier explains that “flexible or curved batteries include flexible packaging materials such as aluminum laminated films that house the electrodes and electrolyte” such that “once the battery packaging is added to a battery such as GMBPow and then placed within a housing (e.g., external housing shell and internal potting), the resulting device would have dimensions that are not suitable for a finger-worn ring.” Id. ¶ 96 (citing Ex. 2026).” slip op. at 34
Patent outcomesUS 11,188,124 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,188,124 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 29, 2026 · IPR2025-00247 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 1–19 were not shown unpatentable under any of six obviousness grounds because Truitt did not teach or suggest the claimed severity calculation and index, and the Mumford combinations lacked the required sensor disclosures.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name its corporate parent, Resmed Inc., as a real party in interest. Paper 29. Petitioner filed an opposition. Paper 31. Patent Owner filed a reply. Paper 32. We denied the Motion to Terminate. Paper 40.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“disorder symptoms” require a “quantitative” calculation or use of an algorithm, we also disagree. See PO Resp. 14–16. First, nothing in the language of the claims themselves describes or requires a “quantitative” calculation or an algorithm. See generally Ex. 1001, 23:6–26:59. To be sure, the ’029 patent discloses embodiments that use known algorithms to “quantify the level of severity of the subject’s sleeping disorder or symptoms.” See, e.g., id. at 20:16–19. But the Specification does not require an algorithm. The Specification also indicates that quantification is merely “preferable” (i.e., not required), and is merely one embodiment. See, e.g., id. at 19:8–12 (“The signals from the one or more sensors used in various embodiments of the present invention are preferably analyzed using a processor and software that can quantitatively estimate or determine the severity of the subject’s sleeping disorder or symptoms.”) (emphasis added), 4:51–59 (“Finally, in still another embodiment, the present invention includes a sleeping disorder treatment system comprising a device for diagnosing and creating a quantitative output of a level of severity of a subject’s sleeping disorder or symptoms . . . .”) (emphasis added); see also Reply 5–6 (citing Ex. 1001, 4:3–59 and 19:8–12 and stating that the ’029 patent lists “numerous embodiments where only one of seven include a quantitative assessment”). Elsewhere, the Specification more generally states that signals from sensors are “analyzed to determine the level of severity of the symptoms,” without specifying that such analysis must be “quantitative” or performed by an algorithm. See Ex. 1001, 3:41–44. In view of these disclosures, Patent Owner does not persuade us to adopt its narrowing claim construction. Indeed, our reviewing court has “repeatedly warned against confining the claims” to specific embodiments disclosed in the Specification. Phillips, 415 F.3d at 1323. Patent Owner’s reliance on a prior Board decision in PGR2024- 00012, which related to the parent of the ’029 patent, is unavailing. See PO Resp. 15–16. We agree with Petitioner that in the cited case, “[t]he Board made no findings about the meaning of the term calculating ‘the data of a severity of the sleep disorder symptoms of the subject’ for claim construction.” Reply 8. Indeed, neither party offered any claim construction, and the Board determined that no claim construction was necessary for purposes of that decision. See ResMed Corp., PGR2024- 00012, Paper 7 at 8. The page of the decision Patent Owner cites addresses written description support in the specification for the claims challenged in that PGR, not claim construction. See id. at 16. In any event, the cited decision is a decision on institution. The Board’s statements there are, by nature, preliminary findings and conclusions based on a preliminary record, and are not binding here. For at least the above reasons, Patent Owner does not persuade us to adopt its narrowing claim construction and we find that the term “data of a severity” does not need construction because the words of the term are clear on their face.” slip op. at 31
- Strike new argumentNew argument disregardedDecided for patent owner
“skilled artisan would have incorporated only portions of Mumford’s algorithm into Truitt’s PAP (i.e., only those portions related to “the detection of sleep disordered events” and not the portions of the algorithm related to “determin[ing] sleep stage”) comes too late because this argument was not in the Petition. See, e.g., Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286–87 (Fed. Cir. 2017) (rejecting petitioner’s “attempts to cure the petition’s deficiencies in its subsequent briefing to the Board”). The Petition does not discuss modifying Mumford’s sleep efficacy algorithm before incorporating it into Truitt’s PAP device or incorporating only certain features of the algorithm. Indeed, the Petition and Dr. Kirkness rely on Mumford’s ability to detect sleep arousals when mapping Mumford to the claimed “data of a severity” and “index.” See Pet. 69–70; Ex. 1003 (Kirkness Decl.) ¶¶ 323–325. Mumford discloses that the mask electrodes detect arousals. See Ex. 1009 (Mumford) 2:4–10, 11:39–48. The same lack of disclosure plagues Petitioner’s belated Reply argument that Truitt’s ports 74 and 76 can incorporate electric sensing elements that would have functioned similar to Mumford’s electrodes. See Reply 22. The Petition did not mention ports 74 and 76 or otherwise suggest that a skilled artisan would have added functionality similar to Mumford’s electrodes to Truitt’s PAP, and we find that it is too late on Reply for Petitioner to posit this modification.” slip op. at 40
- Expert testimonyPetitioner expert creditedPatent owner expert creditedMixed
“significant than the intrinsic record in determining ‘the legally operative meaning of claim language.’” Phillips v. AWH Corp., 415 F.3d 1303, 1317 (Fed. Cir. 2005). This is especially applicable to Dr. Jafari’s opinions. His declaration was not prepared for this proceeding and thus Dr. Jafari was not subject to cross examination in this proceeding. See Reply 6 n.3. Moreover, Dr. Jafari was not opining on claim construction; rather, he was addressing the alleged indefiniteness. See Ex. 2020 (Jafari Decl.) 12 (heading addressing definiteness), ¶¶ 41–42, 46. Additionally, paragraphs 41–42 of Dr. Jafari’s declaration discuss claim terms phrases in a different patent (US 11,375,921), which explicitly include the terms “quantified” and “quantitative.” See Reply 6–7; Ex. 2020 (Jafari Decl.) ¶ 34. For at least these reasons, Patent Owner has not persuaded us that Dr. Jafari’s testimony is applicable here. Further, regarding the portion of Patent Owner’s proposed construction reciting “the degree of deviation from the baseline characteristics of a patient without sleep disorder symptoms,” Dr. Borkholder does not do his own analysis, but instead simply states that he “agree[s] with the litigation claim construction opinions of Dr. Jafari.” Ex. 2019 (Borkholder Decl.) ¶ 53. This is insufficient, and thus we do not credit Dr. Borkholder’s testimony regarding claim construction. We instead credit Dr. Kirkness’s statement that “[s]everity data is frequently calculated as the deviation from baseline characteristics of the patient himself, not a generic person ‘without sleep disorder symptoms.’” Ex. 1071 (Kirkness Reply Decl.) ¶ 13; Reply 9. As Dr. Kirkness explains, and Patent Owner does not dispute (see generally Sur-reply), “[t]he ‘baseline characteristics of a [generic] patient without sleep disorder symptoms’ would be irrelevant to any particular patient with their own unique breathing patterns and sleep disorder symptoms.” Ex. 1071 (Kirkness Reply Decl.) ¶ 13 (second alteration in original). For at least these reasons, we reject Patent Owner’s proposed claim construction.” slip op. at 30
Patent outcomesUS 11,872,029 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,872,029 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 5, 2026 · IPR2025-00160 · APJ Sheridan K Snedden · IPR · Final written decision
Claims 1–5, 7, 8, 10–13, 15–18, and 20–31 were not shown unpatentable because the proposed Toge-Kumar combination did not establish the claimed remote internet site hosted on a server.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for petitionerDecided for petitioner
“Patent Owner filed a Response. Paper 23 (“PO Resp.”). Petitioner filed a Reply. Paper 27 (“Reply”). Patent Owner filed a Sur-reply. Paper 35 (“Sur-reply”). Additionally, during trial, Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name a real party in interest (namely, Petitioner’s corporate parent, Resmed Inc.). Paper 37. Petitioner filed an opposition. Paper 38. Patent Owner filed a reply. Paper 39. We denied the Motion to Terminate. Paper 44.” slip op. at 2
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We determine that no express construction of any claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability. C. Level of Ordinary Skill in the Art” slip op. at 11
- Skill levelSkill level petitioner adoptedDecided for petitioner
“We adopt Petitioner’s proposed level of ordinary skill in the art because it appears to be consistent with the cited prior art and is undisputed on this record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level). D. Summary of the Asserted Prior Art” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“summarized above, we determine that a person of ordinary skill in the art would not have implemented Toge’s physician-side computer as a web server using a “localhost” architecture as proposed by Petitioner because such a configuration cannot communicate with external devices over the public internet, a deficiency that directly contradicts Petitioner’s stated motivations for the combination of permitting broad data access. Petitioner’s expert, Dr. Chatterjee, expressly acknowledged in his Reply Declaration that when a client and server reside on the same machine, the communications between them do not traverse the internet. Ex. 1069 ¶ 8. Specifically, Dr. Chatterjee cited the Microsoft Computer Dictionary’s definition of “localhost” as “[t]he name that is used to represent the same computer on which a TCP/IP message originates,” noting that “[a]n IP packet sent to localhost has the IP address 127.0.0.1 and does not actually go out to the Internet.” Id. (citing Ex. 1070, 316). Accordingly, Petitioner’s proposed configuration of placing both the client and web server on Toge’s physician-side computer would create a closed loop of communication that does not reach the broader network. Id. As noted by Patent Owner, “[i]f ‘the physician-side computer and the web server are on one machine,’ the local web server would not communicate with other devices via the Internet.” Sur-Reply, 3–4 (comparing Ex. 1069 ¶ 19 with id. at ¶ 8). Thus, the consequence of Petitioner’s proposed Toge-Kumar configuration is that other devices in the system, such as the PAP device that generates the treatment data and any remote client devices that might need to access that data, would be unable to send data to or retrieve data from the localhost web server. Patent Owner persuasively argues, supported by evidence of record, that under Petitioner’s proposed configuration, “the PAP device could not send data thereto nor could other clients receive data therefrom, as only the local client browser can exchange data.” Id. (citing Ex. 1069 ¶ 8); see Ex. 2003, 4 (one-tier architecture “is not suitable for a web application” because “it can only access data available in a single computer or server” and therefore “is not suitable for a web application.”); Ex. 2022, 3 (Unlike more advanced multi-tier systems, a one-tier architecture “cannot transmit information from one client machine to another.”); Ex. 2020, 4 (While “the client process and server process can be on the same computer,” this architecture “is rarely used today” precisely because it cannot “take advantage of the distributed computing environment.”).” slip op. at 29
Patent outcomesUS 11,786,680 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,786,680 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · Jun 4, 2026 · IPR2025-00158 · APJ Sheridan K Snedden · IPR · Final written decision
Claims 1–20 were not shown unpatentable because Orbach did not disclose a single computer or processor performing all claimed remote analysis, output, and display functions.
RulingsFinal written decision- BurdenNot shown unpatentable
“After considering all of the arguments and evidence presented on the full trial record, we determine that Petitioner has not demonstrated by a preponderance of the evidence that claims 1–6, 8–17, 19, and 20 are unpatentable as obvious over the combination of Ciulla and Orbach. We find that the deficiencies in Petitioner’s arguments regarding claim limitations [1.d], [1.f], and [1.g] are dispositive and we address the parties’ arguments concerning those limitations below.” slip op. at 24
- Skill levelSkill level petitioner adoptedOther
“Pet. 8. Patent Owner agrees to apply Petitioner’s proposed definition of POSITA. PO Resp. 4. We adopt Petitioner’s proposed definition of a POSITA because the proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“the Board need not construe any terms. Pet. 9. Patent Owner agrees. PO Resp. 4. We determine that no express construction of any claim term is necessary to resolve the dispute between the parties. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Nevertheless, in our analysis of the asserted grounds of unpatentability below, we discuss the scope of certain claim terms, e.g., “the computer” and “the processor.” C. Level of Ordinary Skill in the Art” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“Accordingly, to show obviousness, Petitioner must show in Orbach that either (a) remote server 140’s output to viewing station 150 constitutes “display” within the meaning of the claim, or (b) viewing station 150 receives data “over cell towers” notwithstanding the intervening server. We determine that Petitioner has failed to do so on this record. Our analysis follows.” slip op. at 33
Patent outcomesUS 11,690,512 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,690,512 - Resmed Corp. v. Cleveland Medical Devices, Inc.No claims unpatentablePTAB · May 18, 2026 · IPR2025-00159 · APJ Cynthia M Hardman · IPR · Final written decision
Claims 1, 2, 4, 5, 7–9, 11–14, and 16 were not shown unpatentable under either § 103 ground because Petitioner did not establish the proposed remote internet site modification.
RulingsFinal written decision- PTAB / AIA Trials › Real party in interest / privityRpi dispute resolved for patent ownerDecided for patent owner
“Patent Owner filed an authorized Motion to Terminate, alleging that Petitioner failed to name a real party in interest (namely, Petitioner’s corporate parent, Resmed Inc.). Paper 37. Petitioner filed an opposition. Paper 38. Patent Owner filed a reply. Paper 39. We denied the Motion to Terminate. Paper 44.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“understanding of a person of ordinary skill in the art at the time the invention was made.8 See Graham, 383 U.S. at 17–18. The parties agree that a person of ordinary skill in the art (sometimes referred to herein as a POSITA) would have had: at least a bachelor’s degree in mechanical engineering, electrical engineering, computer science, biomedical engineering, or a similar technical field, with at least two years of relevant product design experience working with diagnostic sensor systems and network data systems, such as networked PAP machines. Additional experience could substitute for less education, and additional education could likewise substitute for less experience. Pet. 12–13 (citing Ex. 1003 (Kirkness Decl.) ¶¶ 44–46); PO Resp. 7–8. Because the proposed level of ordinary skill in the art is consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (indicating that the prior art itself may reflect an appropriate skill level).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“We find it unnecessary to construe any claim term to resolve the issues in this case. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“its burden of explaining why a person of ordinary skill in the art would have implemented a remote internet site in Toge’s system in the specific fashion Petitioner asserts (i.e., using the physician-side computer as a web server). As Patent Owner aptly states, the operative question is not merely whether a person of ordinary skill in the art would have modified Toge’s system to include a remote internet site, but whether the artisan would have modified Toge’s system to include a remote internet site “on a physician’s client computer” in accordance with the specific implementation argued by Petitioner. Sur-reply 2. On this critical question, Petitioner’s arguments are thin. Petitioner’s declarant Dr. Kirkness states that a person of ordinary skill in the art “would have understood that one common way to access data transmitted over the internet, like the data from Toge’s wireless PAP device, is via a remote internet site.” Ex. 1003 ¶ 214. This assertion is reasonable. Indeed, prior art of record, such as Kumar, illustrates use of a central server that hosts a browser-based engine that can be accessed through web pages. See, e.g., Ex. 1008 (Kumar) Fig. 1A, ¶¶ 67, 72, 79, Pet. 10. Petitioner, however, elected to argue a specific implementation, namely that the skilled artisan would have modified Toge’s physician-side computer to operate as a web server. See, e.g., Pet. 15; Ex. 1005 (Chatterjee Decl.) ¶ 146; Reply 4. We find that this implementation is unsupported on this record. Petitioner has not pointed us to any disclosure in Toge, Burton, or Kumar (or any other prior art reference of record) that teaches or suggests “that a doctor’s computer should act a web server hosting sensitive patient data.” PO Resp. 9 (emphasis added). And critically, the Petition is silent as to why a person of ordinary skill in the art would have selected this implementation in particular. See, e.g., Pet. 49.” slip op. at 25
Patent outcomesUS 11,375,921 not shown unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,375,921 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Jan 30, 2026 · IPR2024-01078 · APJ Neil T Powell · IPR · Final written decision
Claims 1–6, 11–15, and 38–43 were not shown unpatentable because Petitioner failed to establish obviousness over the asserted combinations, including the feasibility and motivation to use curved batteries in a ring.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. PO Resp. 22; see also Ex. 2018 ¶ 27. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’953 patent and the references cited in the Petition.” slip op. at 9
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner expresses that it “does not believe that any term requires express construction.” Pet. 8. “Patent Owner agrees with Petitioner that no terms need to be construed.” PO Resp. 22. We agree with the parties that resolution of their dispute does not require us to construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy controversy) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“be improper hindsight in Petitioner’s position. Petitioner and Dr. Anthony assume that a POSITA would position the battery between Schröder’s ring halves and implement Mestas’s curved battery because it “allows a larger battery to conform to a ring’s circular shape without stressing the battery or ring housing.” Pet. 60, 64–65; Ex. 1002 ¶¶ 337, 351–354. That position, however, ignores alternative designs that are at least equally supported by Schröder’s disclosure (see Ex. 1007, Fig. 3), but would not result in a ring configured as recited in the challenged claims. Petitioner attempts to downplay this concern by characterizing the modification of Schröder’s ring to include Mestas’s curved battery as an obvious “matter of choice” in design. See Reply 10–11 (citing Ex. 1079 ¶¶ 71–77). We disagree. As explained above, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor because they are “5 to 10 times” the size that would be required for a finger ring. PO Resp. 27 (quoting Ex. 2021, 313:12). Petitioner argues that it “does not propose bodily incorporating Mestas’s battery into Schröder’s ring,” which on the surface is correct. See Reply 10. But this does not help Petitioner meet its burden because its actual obviousness theory that “a POSITA would have found it trivial to implement Mestas’s teachings into a ring like Schröder’s ‘finger-ring’” is not persuasive. See Pet. 60 (citing Ex. 1002 ¶ 338). For the same reasons explained in Section II.D.1 above in our analysis of Ground 1, Dr. Mestas’s teaching of a curved battery (Ex. 1002 ¶ 338) in the much smaller form factor of Schröder’s ring is not credible. See Ex. 2021, 315:9–318:9 (acknowledging that it would have been beyond the level of ordinary skill to miniaturize Mestas’s battery, but that a POSITA could try to procure one); 321:5–10 (conceding that he did not try to ascertain whether such a battery was available in the relevant time frame). Instead, we credit Dr. Mercier’s testimony that Petitioner’s proposed modification would have presented intractable practical challenges. Ex. 2018 ¶¶ 228, 230–240 (describing various aspects of battery design that Dr. Anthony did not consider). As before, Dr. Mercier’s testimony is further supported by evidence showing a consistent pattern of flat battery use in prior art finger-ring devices. See, e.g., Ex. 1005 (Niwa), Figs. 22, 29; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 57–67. In sum, Petitioner’s showing for limitation 1[c] is deficient in multiple respects. First, Petitioner assumes that an ordinarily-skilled artisan would have been motivated to implement Mestas’s curved battery in the much smaller interior space occupied by Schröder’s inlay 12 without sufficiently considering the feasibility of that modification or alternative designs suggested by Schröder. Second, even if we accept Petitioner’s purported rationale for the combination (which we do not because we find it that it is predicated on improper hindsight), Petitioner has not shown that an ordinarily-skilled artisan would have had a reasonable expectation of successfully implementing the proposed modification.” slip op. at 46
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner
“We find that the evidence presented by Patent Owner is sufficient to establish that the Oura Ring Gen. 3 Horizon and Gen. 4 products are commercial embodiments of claim 1 of the ’953 patent and that claim 1 is coextensive in that it encompasses the entire structural apparatus of these products. See PO Resp. 82–92; Ex. 2018 ¶¶ 322–346 (comparing these products to claim 1); Ex. 2029; Ex. 2030; Ex. 2118; Ex. 2119.9 Indeed, Petitioner does not challenge any aspect of Dr. Mercier’s limitation-by-limitation analysis showing that these products practice claim 1. But more than just practicing the claimed invention, Patent Owner’s evidence supports that claim 1 recites the overall structure that provides for the particular form factor of the Oura Ring Gen. 3 Horizon and Gen. 4 products, i.e., a fingerring “wedding band” design that allows for the electronic components to be entirely contained within the ring housing with a curved external surface having no protrusions or bulges. Ex. 2018 ¶¶ 359–360; see also id. ¶¶ 322–346 (pictures depicting wedding band design of the Oura Ring Gen. 3 Horizon and Gen. 4 products); Ex. 2019 ¶¶ 47–49 (“[Patent Owner’s] decision to highlight the ring form factor indicates this feature’s importance to the marketplace success of the Oura Ring.”). We disagree with Petitioner’s assertion that the Oura Ring Application and/or Oura Membership are essential, unclaimed features such that a presumption of nexus is not appropriate. The Oura Application functions in conjunction with the Oura Ring to form a “complete solution” 9 Patent Owner and Dr. Mercier only compare these products to claim 1. Patent Owner has not demonstrated a nexus to independent claim 38. ¶¶ 20–21. The Oura Application cannot receive or display any information absent the Oura Ring’s ability to collect the information from the user. Id. Even though the Oura Application may provide additional unclaimed functionality, such as displaying activity, sleep, and readiness scores based on the data collected by the Oura ring that allow “a user to take advantage of the ring’s offerings,” this functionality is secondary to the ring’s ability to collect that data, without which, the Oura Application would serve no purpose. See Ex. 2019 ¶ 21; Ex. 2024, 93:22–95:22. As the Federal Circuit has explained, “there is rarely a perfect correspondence between the claimed invention and the product.” Fox Factory, 944 F.3d at 1374. Here, we find that on the spectrum of “unclaimed features,” the Oura Ring Application is closer to the “insignificant features” end because, while it allows the user to access and interpret data tracked by their Oura Ring, it does not materially impact the functionality of the Oura Ring or its structure.10 See Teva 8 F.4th at 1361 (explaining that “like the coextensiveness requirement itself, the concept of unclaimed features is best viewed as part of a spectrum”).” slip op. at 27
Patent outcomesUS 10,281,953 not shown unpatentableClaim construction§ 103 obviousnesscites PhillipsPatents in suitUS 10,281,953 - Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentablePTAB · Dec 17, 2025 · IPR2024-01077 · APJ Michael A Valek · IPR · Final written decision
Claims 1, 11, and 13–20 were not shown unpatentable over either Yuen and Mestas or Schröder and Mestas, principally because the curved-battery and waterproof-cavity showings were deficient.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors.” slip op. at 8
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner
“We agree with Petitioner that the term “ring” is not limited to a finger- worn ring. All of the challenged independent recite a “wearable ring computing device” (claims 1 and 11) or “ring computing device” (claim 14). Nothing in the claim language itself refers to where that device is worn. Moreover, the fact that Patent Owner has in several related patents added claim language to expressly recite a ring that is “finger-worn” or “worn around the finger” evidences that the plain meaning of the term “ring” by itself does not require such. Ex. 1362, 44:45–46:61 (claims 1–18); Ex. 1363, 44:64–46:56 (claims 1–17); Ex. 1364, 48:22–23 (claim 1); see Nystrom v. TREX Co., Inc., 424 F.3d 1135, 1143 (Fed. Cir. 2005) (explaining that the fact that another claim recites a “wood decking board” suggests the term “board” is not itself limited to one made from wood or cut from a log because “[w]hen different words or phrases are used in separate claims, a difference in meaning is presumed”). This understanding is further supported by the Specification of the ’859 patent. It is true, as Patent Owner asserts, that the Specification describes a preferred embodiment that is a finger-worn ring. See, e.g., Ex. 1001, Figs. 22A–B, 23A (depicting a finger-worn ring). But precedent cautions against importing limitations from the preferred embodiment into claims. See, e.g., Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2004) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”). Indeed, the Specification here anticipates such arguments and makes clear that the applicants’ wearable computing device (WCD) is not limited to a ring worn on the finger: The WCD can be in the form of a ring that can be worn on the finger of a human (or animal) user. Although the WCD of the present disclosure is depicted as a ring that can be worn on the finger of a user, other shapes, designs, and form factors can be utilized for the WCD. For example, the WCD can be in the form of a wrist band, bracelet, necklace, earring, or any other type of wearable accessory. In this regard, references to the finger of a user in the present application can be considered to apply to other portions of a human body depending on the form of the WCD, such as wrist, neck, ear, etc. Ex. 1001, 8:51–61.” slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable
“ordinarily-skilled artisan to modify Yuen’s device to form the waterproof cavity recited in claim 1, much less explain the particular modifications Petitioner contends that artisan would have made to Yuen’s device housing to achieve such. This is particularly problematic given that the figures Petitioner relies upon in Yuen and Mestas uniformly depict larger, wrist/arm-band type devices. See Ex. 1006, Figs. 2–13, 12:52–55 (depicting a “wrist-worn or arm-mounted accessory such as a watch or bracelet”); Ex. 1010, Figs. 1–6, ¶ 151 (same). Thus, Petitioner’s obviousness theory requires multiple modifications to Yuen’s depicted structure: (1) modifying the identified portions of Yuen’s device housing so that they form a waterproof cavity therebetween; and (2) shrinking that device and its components down to a ring designed to fit around a single toe. We credit Dr. Mercier’s testimony that such modifications would require a “complex” re-engineering of Yuen’s existing structure that Petitioner and Dr. Anthony do not sufficiently explain. See Ex. 2018 ¶¶ 108–109, 129–130, 137–138. The testimony in Dr. Anthony’s supplemental declaration does not provide the missing explanation. Dr. Anthony continues to assert that Yuen’s sensor protrusion is sealed in the space between the alleged bounding members, relying on the same annotated versions of Figures 4 and 5, without addressing the fact that according to Petitioner’s own annotations those bounding members only form a shell that is open to the attachment band at either end. See Ex. 1079 ¶¶ 26–28. Indeed, Dr. Anthony appears to acknowledge that Yuen only teaches attaching the sensor module portion of the alleged cavity with watertight glue, but asserts that “it would not make sense to have a device that is waterproof in some areas and not others.” Id. ¶ 29. That assertion, however, is not supported by anything beyond Dr. Anthony’s say-so and ignores that Yuen’s teachings regarding a watertight seal/glue refer only to the sensor package portion of the alleged cavity. See Ex. 1006, 14:66–15:4, 15:10–14. Dr. Anthony’s assertion that Mestas teaches additional “waterproofing techniques” that could be applied to Yuen’s housing is similarly cursory. See Ex. 1079 ¶ 30. He does not identify what those techniques are or how a POSITA would use them to modify Yuen. Id. Accordingly, we do not credit this testimony.” slip op. at 27
- Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner
“the asserted evidence of secondary considerations and a patent claim if the patentee shows that the asserted evidence is tied to a specific product and that the product ‘is the invention disclosed and claimed.’” Fox Factory, Inc. v. SRAM, LLC, 944 F.3d 1366, 1373 (Fed. Cir. 2019) (quoting Demaco Corp. v. F. Von Langsdorff Licensing Ltd., 851 F.2d 1387, 1392 (Fed. Cir. 1988) (emphasis added)). “That is, presuming nexus is appropriate when the patentee shows that the asserted objective evidence is tied to a specific product and that product embodies the claimed features, and is coextensive with them.” Id. (internal quotation marks omitted). If, on the other hand, “the thing that is commercially successful is not coextensive with the patented invention—for example, if the patented invention is only a component of a commercially successful machine or process, the patentee is not entitled to a presumption of nexus.” Id. (internal quotation marks omitted).” slip op. at 33
Patent outcomesUS 10,139,859 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,139,859 - PTAB · Dec 16, 2025 · IPR2025-01046 · APJ Neil T Powell · IPR · Institution
The Board instituted IPR on claims 2–15, finding a reasonable likelihood that the 1946 Cyclopedia, Lindström, and Wong render at least claim 2 obvious; claim 1 was disclaimed.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner responds that Petitioner’s proposed level of ordinary skill in the art is incorrect, “because design or analysis experience with other industrial wheeled vehicles would not necessarily be applicable to the art of the ’892 Patent.” Prelim. Resp. 12 (citing Ex. 2035 ¶¶ 38–39). According to Patent Owner, a person of ordinary skill in the art “would have at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Id. (citing Ex. 2035 ¶¶ 34, 38). The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years 5 Because Patent Owner statutorily disclaimed claim 1, this ground is moot. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 12. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted.” slip op. at 12
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge would not.” Prelim. Resp. 12–13 (citing Ex. 2035 ¶ 39). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“At this stage, we need not construe expressly any claim term to resolve the parties’ dispute regarding whether Petitioner has demonstrated a reasonable likelihood of prevailing on at least one challenged claim. Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms that . . . are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))” slip op. at 14
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“been obvious over the 1946 Cyclopedia and Wong. Weighing the parties’ arguments and evidence, we find Petitioner provides sufficient rational underpinning for its assertion that it would have been obvious in view of Wong to implement a cross-wise extending beam to reinforce the 1946 Cyclopedia’s NSC ore car’s end slope sheet. Pet. 52–53; Prelim. Resp. 28– 30. In response to Petitioner’s assertion that “[t]he upper, outboard end of [Wong’s slope sheet 26] is reinforced by a cross-wise, L-shaped beam positioned under the slope sheet,” Patent Owner argues that “Wong does not provide reinforcement, but simply shows two sheets being connected for lading containment and load transfer.” Pet. 52; Prelim. Resp. 29. At this stage, we find Petitioner has the better position. Although we agree with Patent Owner that Wong shows two sheets connected to one another, that does not negate Petitioner’s correct observation that Wong shows an upper end of its end slope sheet 26 resting on an L-shaped structure, which apparently would reinforce end slope sheet. Pet. 52; Ex. 1003 ¶ 56. reason to look to Wong in the first place,” we again find that Petitioner has the better position at this stage. Prelim. Resp. 29. For example, Wong’s disclosure of “hopper railcar 10” (Ex. 1006, 3:6–9) and the 1946 Cyclopedia’s disclosure of “Freight Cars: Hopper Ore” (Ex. 1004, 27–28; Ex. 1054, 27–28) support Petitioner’s position that “Wong and the 1946 Cyclopedia are in the same field.” Pet. 52; see also id. at 76 (“Wong discloses a rail road hopper car (‘hopper railcar’ 10)”), 18–19 (“The ore-car section of the 1946 Cyclopedia—entitled ‘Freight Cars: Hopper Ore’— contains drawings and a photograph of an ore car manufactured by Patent Owner NSC.”); Ex. 1003 ¶ 56 (“Wong and the 1946 Cyclopedia are in the same field of hopper railcars”) (citing Ex. 1004, 27–28; Ex. 1006, code [57]). This position is not persuasively rebutted by Patent Owner’s argument that Wong’s hopper railcar 10 uses aluminum and steel together for certain reasons. Prelim. Resp. 28–29.” slip op. at 23
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,166,892 - PTAB · Dec 16, 2025 · IPR2025-01047 · APJ Hyun J Jung · IPR · Institution
The Board instituted IPR of claims 1–44 on all presented challenges, finding a reasonable likelihood that FreightCar would prevail on at least one claim based on Hart, the 1906 Cyclopedia, and Wong.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” Upon consideration of the Petition and for the reasons explained below, we determine that Petitioner has shown a reasonable likelihood of prevailing with respect to at least one of the challenged claims. Thus, we institute an inter partes review of claims 1–44 of the ’515 patent on all presented challenges. 37 C.F.R. § 42.108(a) (2024) (“When instituting . . . review, the Board will authorize the review to proceed on all of the challenged claims and on all grounds of unpatentability asserted for each claim.”); see also SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“The parties agree that one of ordinary skill in the art “would have had at least a bachelor’s degree in a discipline related to mechanical engineering, physics, structural design, or an equivalent discipline, and at least two years of experience designing or analyzing rail cars.” Pet. 29; Prelim. Resp. 9. Patent Owner, however, disagrees that the experience should include designing or analyzing “similar vehicles.” Prelim. Resp. 9. At this stage, for the reasons below, limiting the ordinary skill in the art to “at least two years of experience designing or analyzing rail cars” does not affect our analysis of the parties’ dispute or our determination that there is a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims. Thus, based on the preliminary record, we adopt Petitioner’s proposed level of ordinary skill to determine whether review should be instituted. Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Expert testimonyPetitioner expert creditedDecided for petitioner
“Patent Owner also argues that Petitioner’s declarant does not have “actual industry experience with railcar structures” and, thus, “makes the wrong conclusions and conflates various concepts that a [person of ordinary skill in the art] with practical industry experience and knowledge of rail cars would not.” Prelim. Resp. 9–10 (citing Ex. 2035 ¶ 35). For the reasons discussed below, in our preliminary analysis, we give credit to the cited testimony of Petitioner’s declarant, because it finds support in the relied-upon portions of the record.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“to further support the upper, outboard end of the slope sheet with a crosswise, L-shaped beam as in Wong,” and one of ordinary skill in the art would have been motivated to do so, because of “the benefits of reinforcing the slope sheet at its upper end, where its connection with another structure creates a stress concentration.” Pet. 63 (citing Ex. 1003 ¶ 108). Petitioner points to Hart’s transverse beam b3 and argues that it suggests using a transverse beam like Wong if Hart is modified so that upper beam b3 no longer supports the slope sheet. Id. (citing Ex. 1008, Fig. 1). Petitioner also argues that the references are in the same field and that there would have been a reasonable expectation of success. Id. at 63–64 (citing Ex. 1003 ¶ 108; Ex. 1008, Fig. 1). Based on the preliminary record, Petitioner shows that its proposed combination of Hart, the 1906 Cyclopedia, and Wong teaches or suggests the above-quoted limitations of claim 24 and that one of ordinary skill in the art would have combined those references in the manner asserted with a reasonable expectation of success.” slip op. at 19
§ 103 obviousnesscites Phillips · KSRPatents in suitUS 8,132,515
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.