• Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentable
  PTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision

  Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.

  RulingsFinal written decision

  • BurdenMixed

    “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19

  Patent outcomesUS 11,298,166 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,298,166
• Weber, Inc. v. Provisur Technologies, Inc.Some claims unpatentable
  PTAB · Oct 21, 2024 · IPR2020-01557 · APJ Jon M Jurgovan · IPR · Remand

  On remand, claims 1–4 and 8–11 were held obvious; claims 5–7 were not shown unpatentable because the asserted combinations did not establish claim 5’s drive-roller limitation.

  RulingsRemand decision

  • RemandFwd mixedMixed

    “Specifically, the Federal Circuit “reverse[d] the Board’s finding that Weber’s operating manuals do not qualify as printed publications.” Weber, 1 Patent Owner also submitted redacted versions of its Preliminary Response, Response, and Sur-Reply. Papers 8, 24, 48. The redactions relate to information subject to our Protective Orders. Papers 13, 57. 92 F.4th at 1069. The Federal Circuit further held that the prior art disclosed the “disposed over” limitation of claim 1 as properly construed, as well as the “stop gate” limitation of claim 1. Weber, 92 F.4th at 1069–1072. In addition, the Federal Circuit indicated it had considered Petitioner’s remaining arguments and found them unpersuasive. Weber, 92 F.4th at 1072. Accordingly, the Federal Circuit vacated our determinations that Petitioner failed to establish unpatentability of claims 1–11 of the ’812 patent, and remanded the case to the Board for further proceedings consistent with its opinion. Weber, 92 F.4th at 1072.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “II. LEVEL OF ORDINARY SKILL IN THE ART Petitioner proposes that a person of ordinary skill in the art would have had “(1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working on food processing and/or packaging systems (or in a similar field)” or “(2) at least seven years of experience working on food processing and/or packaging systems (or in a similar field).” Pet. 20 (citing Ex. 1003 ¶¶ 26–27). Patent Owner does not contest Petitioner’s definition or provide its own proposal. For purposes of this Decision, we adopt Petitioner’s proposal because Petitioner’s proposed definition is consistent with the level of skill demonstrated in the cited prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • Prior constructionPrior construction adoptedDecided for petitioner

    “disposed over the food article loading apparatus.” The Federal Circuit reversed the construction set forth in the prior FWD and held that the “disposed over” limitation “requires only that the feed apparatus be generally positioned above the loading apparatus.” Weber, 92 F.4th at 1070. We follow the Federal Circuit’s construction of “disposed over” in this decision. We need not provide an express construction for any other claim terms to resolve the dispute before us. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy). We note, though, that in reaching our conclusion, we apply the ordinary and customary meaning to all claim terms. 37 C.F.R. § 42.100(b) (2019).” slip op. at 10

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble not limitingDecided for petitioner

    “We agree with Petitioner that the preamble of claim 1 is disclosed by each of the slicing machines disclosed in 2006 904 Operating Manual, Lindee, and Sandberg. Thus, we need not and do not decide whether the preamble is limiting.” slip op. at 19

  Patent outcomesUS 10,639,812 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,639,812
• Weber, Inc. v. Provisur Technologies, Inc.Some claims unpatentable
  PTAB · Oct 3, 2024 · IPR2020-01557 · APJ Jon M Jurgovan · IPR · Remand

  Claims 1–4 and 8–11 are unpatentable as obvious; claims 5–7 were not shown unpatentable because the asserted combinations did not establish claim 5’s recessed-diameter limitation.

  RulingsRemand decision

  • RemandOther

    “Specifically, the Federal Circuit “reverse[d] the Board’s finding that Weber’s operating manuals do not qualify as printed publications.” Weber, 1 Patent Owner also submitted redacted versions of its Preliminary Response, Response, and Sur-Reply. Papers 8, 24, 48. The redactions relate to information subject to our Protective Orders. Papers 13, 57. 92 F.4th at 1069. The Federal Circuit further held that the prior art disclosed the “disposed over” limitation of claim 1 as properly construed, as well as the “stop gate” limitation of claim 1. Weber, 92 F.4th at 1069–1072. In addition, the Federal Circuit indicated it had considered Petitioner’s remaining arguments and found them unpersuasive. Weber, 92 F.4th at 1072. Accordingly, the Federal Circuit vacated our determinations that Petitioner failed to establish unpatentability of claims 1–11 of the ’812 patent, and remanded the case to the Board for further proceedings consistent with its opinion. Weber, 92 F.4th at 1072.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “II. LEVEL OF ORDINARY SKILL IN THE ART Petitioner proposes that a person of ordinary skill in the art would have had “(1) a bachelor’s degree (or equivalent) in mechanical engineering (or a similar field) and at least two years of experience working on food processing and/or packaging systems (or in a similar field)” or “(2) at least seven years of experience working on food processing and/or packaging systems (or in a similar field).” Pet. 20 (citing Ex. 1003 ¶¶ 26–27). Patent Owner does not contest Petitioner’s definition or provide its own proposal. For purposes of this Decision, we adopt Petitioner’s proposal because Petitioner’s proposed definition is consistent with the level of skill demonstrated in the cited prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 10

  • Prior constructionPrior construction adoptedDecided for petitioner

    “disposed over the food article loading apparatus.” The Federal Circuit reversed the construction set forth in the prior FWD and held that the “disposed over” limitation “requires only that the feed apparatus be generally positioned above the loading apparatus.” Weber, 92 F.4th at 1070. We follow the Federal Circuit’s construction of “disposed over” in this decision. We need not provide an express construction for any other claim terms to resolve the dispute before us. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy). We note, though, that in reaching our conclusion, we apply the ordinary and customary meaning to all claim terms. 37 C.F.R. § 42.100(b) (2019).” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “the structure and function of the 2006 904 Operating Manual’s product holder and Lindee’s grippers are similar in that they serve to grip food product and guide it to the slicing station. See, e.g., Ex. 1005, 23; Ex. 1006, 18:20–35, Fig. 7A. The two devices differ in their actuation—the 2006 904 Operating Manual uses a ball screw spindle actuator to drive the product holder along the feed path, whereas Lindee uses a timing belt 334 to drive its grippers 151 along the feed path. Ex. 1005, 273–274; Ex. 1006, 18:33–34, Fig. 7A. However, Petitioner presented evidence that “unlike ball screws, belt drives do not require periodic lubrication with grease or exhibit backlash when they change direction.” Ex. 1003 ¶ 160. In addition, Petitioner demonstrates that a POSA at the time would have understood that conveyor belts like Lindee’s can be easily cleaned. Ex. 1051 ¶¶ 50–54. Petitioner further asserted that conveyor belts are easy to maintain at low cost. Id. citing ¶¶ 55–58. We agree with Petitioner that, at least for some scenarios, including those that Petitioner specifies, a POSA would have seen that there were advantages to using Lindee’s timing belt rather than the 2006 904 Operating Manual’s ball-screw to drive food article grippers. Petitioner has demonstrated a POSA would have been motivated to combine Lindee’s belt-driven grippers in the 2006 904 Operating Manual’s food slicer notwithstanding Patent Owner’s arguments to the contrary.” slip op. at 50

  Patent outcomesUS 10,639,812 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,639,812
• Lululemon Athletica Canada Inc. / Lululemon USA Inc. v. Nike, Inc.Some claims unpatentable
  PTAB · May 13, 2024 · IPR2023-00189 · APJ Stephen E Belisle · IPR · Final written decision

  Claims 1–4, 7, 8, and 11–16 are unpatentable over Arrasvuori; claims 5, 6, 9, 10, and 17–20 are not unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art also is reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Neither party argues that the outcome of this case would differ based on our adoption of any particular definition of the level of ordinary skill in the art. Considering the subject matter of the ’256 patent, the background technical field, the prior art, and Petitioner’s unopposed definition of the skilled artisan, we apply the level of skill set forth above, which is consistent with the testimony of Dr. Lynch (Ex. 1003 ¶¶ 43, 44).” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “simultaneously communicate in real-time to the first user at the first location and the second user at the second location, an interface indicating whether the challenge has been met.” Ex. 1001, 40:64–67 (emphasis added). The claim language itself suggests that “continuously generat[ing]” an interface in “real-time” allows the interface to indicate whether a challenge “has been met,” and doing so “in real-time” suggests that updates to the interface are generated as developments occur that may affect whether the challenge “has been met.” Notably, the subject claim limitation explicitly recites “continuously” generating the interface “in real-time”; it does not recite— but easily could have if intended—“periodically” generating the interface (i.e., at predetermined time intervals independent of the occurrence of developments that may affect whether the challenge has been met).3” slip op. at 29

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artDecided for petitioner

    “Petitioner contends Arrasvuori qualifies as prior art under 35 U.S.C. §§ 102(a) and 102(e) based on its filing and publication dates. Pet. 24. Patent Owner does not contest the prior art status of Arrasvuori. Also, on this record, we have no evidence of an invention date other than the earliest possible effective filing date of the challenged claims. Thus, for purposes of this Decision, we determine that Arrasvuori qualifies as prior art under 35 U.S.C. § 102(a) because Arrasvuori’s publication date of October 11, 2007, is before the earliest possible effective filing date of the challenged claims, which is March 3, 2008, and under § 102(e) because Arrasvuori’s filing date of March 29, 2006, is before the earliest possible effective filing date of the challenged claims (March 3, 2008). Ex. 1001, codes (22), (60), (63); Ex. 1005, code (22), (43).” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Arrasvuori discloses (a) “[m]onitoring” of “users performing real- world fitness tasks” (Ex. 1005 ¶ 38), using (b) “monitoring equipment . . . integrated into . . . wireless nodes and/or other computers of users, and/or [] attached to bodies of users” (id. at ¶ 39 (emphasis added)), where (c) “[u]sers might . . . wear their wireless nodes and/or other computers” (id. (emphasis added)), and where (d) “[t]he phrase[] ‘computer’ . . . refer[s] but [is] not limited to . . . a computerized watch” (id. at ¶ 90 (emphasis added); see id. at ¶ 40 (disclosing that “employed monitoring equipment might include one or more sensors”)). We find that these descriptions in Arrasvuori provide an anticipatory disclosure, particularly to the skilled artisan, of the limitation “wirelessly-connected sensor worn on an appendage of a first user.” See Ex. 1017 ¶ 45; Ex. 2006, 84:10-85:22. Although Arrasvuori does not recite in a single sentence the substance of disclosures (a) through (d) above, such as explicitly stating that its “wireless node is a computerized watch,” this is not necessary for the skilled artisan to understand that Arrasvuori discloses such a feature. See In re Bond, 910 F.2d at 832–33 (anticipation “is not an ‘ipsissimis verbis’ test”). Moreover, as argued by Petitioner, Arrasvuori’s disclosure of sensors “attached to bodies of users” and of users “wear[ing]” sensors itself discloses the subject limitation as broadly recited, even without considering the additional disclosure of a computerized watch. See Pet. Reply 17 (“Arrasvuori teaches wrist-worn sensors by stating that its users can ‘wear their wireless nodes and/or other computers.’” (citing Ex. 1005 ¶39)).” slip op. at 21

  Patent outcomesUS 9,278,256 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,278,256
• Dynaenergetics Europe GmbH / Dynaenergetics US, Inc. v. SWM International, LLCSome claims unpatentable
  PTAB · Feb 5, 2024 · IPR2022-01372 · APJ Elizabeth M Roesel · IPR · Final written decision

  Claims 3, 7, 24–26, 29, 30, and 34–36 are unpatentable as anticipated by Yonghong and Hardesty; claims 4 and 16 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had “a Bachelor of Science in mechanical or electrical engineering and 2–5 years of experience designing perforating gun systems.” Pet. 25. According to Petitioner, “[t]he individual should be familiar with prior art methods of using gravity to orient the shaped charges in a rotatable charge tube.” Id. Petitioner further contends that “[p]ersons with different degrees may also have ordinary skill in the art, and increased education or experience could compensate for shortcomings in other areas.” Id. (citing Ex. 1003 ¶ 51). Patent Owner does not dispute Petitioner’s definition of the level of ordinary skill in the art. PO Resp. 7–8. We apply Petitioner’s articulation of the level of ordinary skill in the art, which is consistent with the level of skill in the art at the time of the invention as reflected in the Specification of the ’762 Patent and the asserted prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “In the Institution Decision, we agreed with Patent Owner’s proposed construction for the term “collar.” Inst. Dec. 10. Because Patent Owner’s proposed construction is undisputed and supported by the ’762 Patent’s description of “outer collar 24” as having “annular side wall 62” (Ex. 1001, 7:59–63, Fig. 3), we construe a “collar” as “an annular or ring-shaped structure.”” slip op. at 10

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “We are persuaded by Petitioner’s contention that Yonghong discloses a “collar,” as recited in the claims. Petitioner identifies Yonghong’s bushing 4 as the recited “collar.” Pet. 30–31. As discussed below, the evidence shows that bushing 4 is annular or ring-shaped, as set forth in our claim construction.” slip op. at 14

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “expert, Dr. Rodgers, who provided a 3-D CAD (three-dimensional computer aided design) model based on Yonghong’s disclosure. Ex. 1003 ¶ 38. Dr. Rodgers’ 3-D CAD model shows an annular or ring-shaped structure corresponding to Yonghong’s bushing 4. Id. At his deposition, Dr. Rodgers explained that Yonghong Figure 1 shows some parts as “half model cuts,” other parts as “a quarter cut-away,” and still other parts in “full circumference,” i.e., “[t]hey’re not cut at all.” Ex. 2008, 37:11–20. The gun carrier is shown as a half cut, and the bushing 4 is shown as a quarter-cut. Id. at 57:24–58:11, 65:3–12. Referring to bushing 4 in Yonghong Figure 1, Dr. Rodgers explained that “[a] person of ordinary skill looks at that and understands it’s a quarter-cut model, and that’s one continuous part, a ring that wraps around the bearing.” Id. at 65:13–22; see also 60:17–24 (“A bushing or a collar slides around the outside of the bearing, or another way to say it is the bearing fits within that bushing or collar to mount it in the carrier.”). According to Dr. Rodgers, there is no need for the text of Yonghong to include this description “because a person of ordinary skill looks at this v[e]ry standard drawing and understands what it is.” Id. at 60:25–61:2.” slip op. at 15

  Patent outcomesUS 11,078,762 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,078,762
• Abbott Diabetes Care Inc. v. Dexcom, Inc.Some claims unpatentable
  PTAB · Nov 2, 2023 · IPR2022-00914 · APJ James A Tartal · IPR · Final written decision

  Claims 105 and 106 are unpatentable as obvious over Heller and Mastrototaro; Abbott did not prove claims 49, 80, 81, 85, or 86 unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed

    “on the general knowledge of a person of ordinary skill in the art to disclose the predictive relationship limitation of claim 49 not taught by Heller are legally deficient. Resp. 28–38. We agree in that Petitioner’s contentions in the Petition amount to no more than a conclusory assertion that a person of ordinary skill in the art “would have known” the predictive relationship limitation. See Pet. 38–39. Petitioner’s arguments in the Petition are divorced from any analysis of Heller and fail to articulate why a person of ordinary skill in the art would have understood Heller to teach the predictive relationship in light of what was purportedly known more generally in the art. Merely asserting that a particular limitation was “known in the art” does not constitute a legally sufficient basis for establishing obviousness. See, e.g., Deere, 383 U.S. at 17–18. While Petitioner purports to identify multiple references that teach a predictive relationship, Petitioner circumvents a legally sufficient obviousness analysis by choosing not to assert any of the references in combination with Heller, but to instead argue they all collectively show that “predictive relationships” were broadly known in the art. See Pet. 28–33. Rather than establish some broad understanding by persons of ordinary skill in the art concerning the predictive relationship limitation, Petitioner’s arguments make clear that each reference uniquely addressed the relationship between a particular sensor and the in vivo performance of the sensor. For example, Petitioner asserts Gross teaches a sensor for which “the pre-insertion, factory-determined in vitro performance curve and” slip op. at 32

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “level in Gross is a “measure of sensor current, not ‘analyte concentration’ is contrary to the express disclosure of Gross. Gross expressly discloses a calibration method that requires, after insertion the in vivo measurement of a saturation level G1 “which can be measured by the sensor and which is of importance for the calibration method.” Ex. 1004, 13:3–18 (further stating that a “voltage V1 (FIG. 4C) applied at time t1 gives a current I1, (FIG. 4B) which corresponds to the saturation level G1 (FIG. 4A) of the enzyme”). Gross explains that “the predetermined stimulus is adapted to saturate the sensor such that the first signal is a maximum signal,” and “[w]hen a sensor is such that it can be saturated by a sufficiently large stimulus, it can be preferable to use this phenomenon in calibrating the sensor as it enables a reproducible first predetermined stimulus, i.e. a saturation stimulus to be provided in all cases, thereby removing uncertainty as to whether the means for providing a predetermined stimulus will in fact achieve exactly the right level of uncertainty.” Id. at 3:17–26.” slip op. at 45

  • Obviousness (§103) › Objective indicia / secondary considerationsNot reached

    “of ordinary skill in the art; and (4) when in evidence, objective evidence of nonobviousness. 5 Graham v. John Deere Co., 383 U.S. 1, 17–18 (1966). An obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” KSR, 550 U.S. at 418. However, Petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, Petitioner must articulate a reason why a person of ordinary skill in the art would have combined the prior art references. In re NuVasive, 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Pers. Web Tech., LLC, v. Apple, Inc., 848 F.3d 987, 993–94 (Fed. Cir. 2017) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention”) (quoting Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015)) (alteration in original).” slip op. at 15

  • ExcludeMotion to exclude, deniedDenied

    “In light of the foregoing multiple critical misrepresentations, Petitioner’s MTE is denied regarding sufficiency of Dr. Baura’s qualifications because Petitioner did not timely object to the evidence on the basis asserted in the MTE, fails to refute Patent Owner’s showing that Dr. Baura is sufficiently qualified (see MTE Opp. 3–7; Ex. 2010 ¶ 30), and abandons its argument in its Reply to the MTE.” slip op. at 57

  Patent outcomesUS 11,000,213 mixed
  § 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,000,213
• Abbott Diabetes Care Inc. v. Dexcom, Inc.Some claims unpatentable
  PTAB · Nov 2, 2023 · IPR2022-00913 · APJ James A Tartal · IPR · Final written decision

  Claims 1, 20, and 21 are unpatentable as anticipated by Heller; the evidence does not establish claims 4–6, 8, or 23–26 unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Expert testimonyMotion to exclude, deniedDenied

    “In opposition, Patent Owner first argues, and we agree, that Petitioner failed to timely object to Dr. Laura’s declaration with sufficient particularity. MTE Opp. 1–3 (citing 37 C.F.R. § 42.64(b)(1)). Our Rule requires that an “objection must identify the grounds for the objection with sufficient particularity to allow correction in the form of supplemental evidence.” 37 C.F.R. § 42.64(b)(1)). Petitioner’s objection to Dr. Baura’s testimony identifies hundreds of paragraphs from her declaration followed by an objection stating her “testimony is based on insufficient facts or data, is not the product of reliable principles and methods, and does not reliably apply the appropriate principles and methods to the fact of the case.” Paper 25, 2. Petitioner’s boilerplate objection is woefully insufficient to show that Petitioner objected with sufficiently particularity to allow correction in the form of supplemental information, as our Rule requires. We further agree with Patent Owner that Petitioner’s arguments in the MTE are no more than a “transparent attempt to . . . circumvent the word-count limits of its merits briefing by injecting merits arguments in its evidentiary motion.” MTE Opp. 9. In short, Petitioner’s arguments go to the weight to be afforded Dr. Baura’s testimony, not to its admissibility, and are, therefore, an improper basis for seeking the exclusion of hundreds of paragraphs Dr. Baura’s declaration. Accordingly, Petitioner’s MTE is denied.” slip op. at 63

  • Skill levelSkill level petitioner adoptedOther

    “Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. Resp. 9. Dr. Baura, in support of Patent Owner, states that she applied Petitioner’s “definition of the level of ordinary skill in the art, because,” in her opinion, Petitioner’s “and Dr. Smith’s conclusions are incorrect even under this definition.” Ex. 2010 ¶ 29. Thus, Dr. Baura neither adopts as proper nor refutes Petitioner’s proposed level of ordinary skill. We find that the ’213 patent and the cited prior art references reflect the appropriate level of skill at the time of the claimed invention and that the level of appropriate skill reflected in these references and the ’213 patent is consistent with the definition of a person of ordinary skill in the art proposed by Petitioner. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 17

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “In view of the issues we address below, including how the claimed subject matter is alleged to have been taught or disclosed in the prior art, we determine that it is not otherwise necessary to address the express interpretation of any claim term. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017); Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy”).” slip op. at 20

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableNot shown unpatentableMixed

    “We agree with Patent Owner that Petitioner’s anticipation argument is insufficiently supported by Heller or the other evidence Petitioner relies upon. Petitioner directs us to no evidence in Heller expressly addressing a predictive relationship between in vitro and in vivo sensitivity, much less any disclosure in Heller of a particular relationship. Instead, Petitioner seeks to stretch a thin disclosure in Heller that “calibration data may simply be factory-determined calibration measurements” to necessarily mean “prior sensitivity information is derived at least in part from a predictive relationship between an in vitro sensor sensitivity to glucose and an in vivo sensor sensitivity to glucose,” as required by claim 23. Pet. 36; Ex. 1005, 77:14–15. Notably, Dr. Smith does not identify any “predictive relationship” disclosed by Heller. Ex. 1002 ¶¶ 148–149. We give little weight to Dr. Smith’s conclusory assertion that a person of ordinary skill in the art would have simply “recognized” Heller’s “factory determined calibration measurements” were necessarily “derived at least in part from a predictive relationship between an in vitro and an in vivo sensor sensitivity to glucose,” particularly where Heller does not expressly preclude in vitro measurements from its “factory determined calibration measurements.” See id. Further, in reply, Petitioner argues again that “(1) Heller discloses that calibration data can ‘simply be factory determined calibration measurements’ . . . and (2) a [person of ordinary skill in the art] would have recognized that this ‘discloses that factory (in vitro) determined sensitivity adequately predicts in vivo sensitivity.’” Reply 6. From Heller’s disclosure preponderance of the evidence that Heller expressly teaches any predictive relationship, even one in which in vitro and in vivo sensitivity are the same. that calibration data can “simply be factory determined calibration measurements,” Petitioner provides no more than speculation to suggest that there necessarily must be some relationship between in vitro measurements and in vivo measurements. See Reply 6–8. Because Petitioner has not shown by a preponderance of the evidence that Heller discloses all of the limitations of clam 23, we determine Petitioner has not shown that Heller anticipates claim 23.” slip op. at 31

  Patent outcomesUS 11,000,213 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,000,213
• Abbott Diabetes Care Inc v. Dexcom, Inc.Some claims unpatentable
  PTAB · Nov 1, 2023 · IPR2022-00909 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1–4, 19, and 23 are unpatentable as obvious; claims 5 and 12 were not shown unpatentable.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner

    “including a “predictive glucose value,” nowhere do we find the written description or drawings to have delineated such a second function expressly as “the present invention.” See, generally, Ex. 1001; see also Evolusion Concepts, Inc. v. HOC Events, Inc., 22 F.4th 1361, 1367 (Fed. Cir. 2022) (“We have repeatedly held that ‘it is not enough that the only embodiments, or all of the embodiments, contain a particular limitation to limit claims beyond their plain meaning.’”) (citation omitted). And, regardless of the exact wording, the concern we have is that without a persuasive, express, indication in the specification that the “second function” is specifically limited to “predicting glucose values,” it is a disfavored path to read limitations into the claims. Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import limitations into a claim that are not expressly part of may not be read into a claim when the claim language is broader than the embodiment. SuperGuide Corp. v. DirecTV Enterprises, Inc., 358 F.3d 870, 875 (Fed. Cir. 2004). The facts and written description here appear to fall more squarely into the category of cases where it is not enough to simply point to embodiments in the specification including the unrecited claim limitation. See Rambus Inc. v. Infineon Techs. Ag, 318 F.3d 1081, 1094 (Fed. Cir. 2003) (Even in cases where a “present invention” statement is provided, the Federal Circuit has explained that ‘[w]hile clear language characterizing ‘the present invention’ may limit the ordinary meaning of claim terms, . . . such language must be read in context of the entire specification and the prosecution history.”) (citation omitted); see also In re Bigio, 381 F.3d 1320, 1325 (Fed. Cir. 2004) (“Absent claim language carrying a narrow meaning, the PTO should only limit the claim based on the specification or prosecution history when those sources expressly disclaim the broader definition.”).” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “is any disagreement about the meaning of “a second function” apart from the argument by Patent Owner that the second function should be understood to include “a predictive glucose value.” We are not apprised of any reason for Petitioner to provide an express construction for “second function” in this case. The plain and ordinary reading of limitation 1b is a method step of “evaluating sensor data using a second function to determine whether a parameter indicative of glucose value meets one or more non user settable second criteria.” Ex. 1001, 48:39–41. As far as “second function” goes, the claim language is clear on its face that the second function “determine[s] whether a parameter indicative of glucose value meets one or more non user settable second criteria.” Id. Patent Owner has not offered any construction, nor apart from criticizing Petitioner, indicated in any manner that the “second function” as recited in claims 1 and 19 requires a construction. Our understanding of “second function” is consistent with the specification of the ’215 patent. A plain reading of the specification reveals that the first criteria relates to the claimed “first function,” and the “second criteria” relates to the claimed “second function.” See, e.g., Ex. 1001 3:44–49 (The ’215 Patent describing “a processor configured to: evaluate sensor data using a first function to determine whether a real time glucose value meets one or more first criteria; evaluate sensor data using a second function to determine whether a predicted glucose value meets one or more second criteria.”). The specification description is therefore mostly consistent with the recitations in claim 1 with respect to the first and second functions and relative first and second criteria. Compare id., with Ex. 1001, 48:36–41.” slip op. at 35

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction needed

    “second function.” PO Resp. 19. However, neither did Patent Owner provide an express construction. See generally id. is any disagreement about the meaning of “a second function” apart from the argument by Patent Owner that the second function should be understood to include “a predictive glucose value.” We are not apprised of any reason for Petitioner to provide an express construction for “second function” in this case. The plain and ordinary reading of limitation 1b is a method step of “evaluating sensor data using a second function to determine whether a parameter indicative of glucose value meets one or more non user settable second criteria.” Ex. 1001, 48:39–41. As far as “second function” goes, the claim language is clear on its face that the second function “determine[s] whether a parameter indicative of glucose value meets one or more non user settable second criteria.” Id. Patent Owner has not offered any construction, nor apart from criticizing Petitioner, indicated in any manner that the “second function” as recited in claims 1 and 19 requires a construction. Our understanding of “second function” is consistent with the specification of the ’215 patent. A plain reading of the specification reveals that the first criteria relates to the claimed “first function,” and the “second criteria” relates to the claimed “second function.” See, e.g., Ex. 1001 3:44–49 (The ’215 Patent describing “a processor configured to: evaluate sensor data using a first function to determine whether a real time glucose value meets one or more first criteria; evaluate sensor data using a second function to determine whether a predicted glucose value meets one or more second criteria.”). The specification description is therefore mostly consistent with the recitations in claim 1 with respect to the first and second functions and relative first and second criteria. Compare id., with Ex. 1001, 48:36–41. slip op. at 34

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In our Institution Decision we determined, in accordance with Petitioner’s proposal, that a person of ordinary skill in the art at the time of the ’215 patent [w]ould have had a Bachelor’s degree in biomedical engineering, mathematics, statistics, or computer science (or a related or equivalent field), and two or more years of experience researching, developing, designing and/or evaluating (or supervising the same) medical devices for measuring analyte levels, e.g., analyte sensors, including at least some experience in researching, developing, designing and/or evaluating (or supervising the same) methods, systems, or algorithms for providing indicators (e.g., alerts, alarms or other indicators) of analyte levels to users, or equivalent experience. A person with less or different education but more relevant practical experience, or vice versa, may also meet this standard. Inst. Dec. 8; Pet. 9–10 (citing Ex. 1002 ¶¶ 24–26). Patent Owner states that “DexCom does not challenge Petitioner’s POSA definition (Petition, 9-10) because the Petition fails even if it is adopted.” PO Resp. 9 (citing Ex. 2008 ¶¶ 20–23). ordinary skill in the art, and because Petitioner’s assessment is consistent with the ’215 patent and the asserted prior art, we continue to rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 11

  Patent outcomesUS 10,702,215 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,702,215
• Dr. Reddy’S Laboratories, Inc. v. Genentech, Inc., Hoffman-La Roche AG, And Abbvie Inc.Some claims unpatentable
  PTAB · Jul 5, 2023 · PGR2022-00023 · APJ Robert A Pollock · PGR · Final written decision

  The Board held claims 2, 3, 5, 14, 26, 27, and 30 unpatentable for lack of written description, but did not find claims 1, 6, and 25 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “We do not discern a substantive difference between the parties’ respective definitions for the level of ordinary skill in the art. Although Petitioner did not expressly recite hematological malignancies, Petitioner did refer to expertise in clinical oncology and cancer biology, which would encompass the blood cancers recited by Patent Owner. Accordingly, we find the parties’ respective definitions to be equivalent and consistent with the level of ordinary skill in the art as reflected by the prior art in this proceeding. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). We find that Dr. Gordon and Dr. Sharman are both qualified to opine from the perspective of a skilled artisan as both are persons of at least ordinary skill in the art, based on either party’s definition. Ex. 1020, ¶¶ 8– 19; Ex. 2008, ¶¶ 11–24.” slip op. at 7

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “We find Dr. Sharman’s statements and deposition testimony have substantially greater credibility than Dr. Gordon’s statements and deposition testimony based on Dr. Sharman’s significantly greater relevant experience in treatment and study of hematological cancers using chemotherapeutic agents and based on Dr. Sharman’s superior recollection and more complete analysis of the record found in the ’942 patent. In particular, we found Dr. Gordon’s statement that no example “includes” every element of claim 1 factually incorrect as contradicted by at least Figure 2 of the ’942 patent where the ordinary understanding of includes to mean encompasses is used. See Ex. 1020 ¶ 131. Ebit Sys. Am., LLC v. Thales Visonix, Inc., 881 F.3d 1354, 1358 (Fed. Cir. 2018) (“The PTAB [i]s entitled to weigh the credibility of the witnesses ....”).” slip op. at 16

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “The parties do not identify any issue relating to the preamble that needs to be addressed to resolve the sole written description challenge and the parties do not dispute that the transitional term “comprising” is “inclusive or open-ended and does not exclude additional, unrecited elements or method steps.” Georgia-Pacific Corp. v. US. Gypsum Co., 195 F.3d 1322, 1327 (Fed. Cir. 1999). We therefore find that there are no terms that need claim construction. See, e.g., Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description adequateWritten description inadequateMixed

    “We find that Figure 2 of the ’942 patent and the associated example provide literal and express descriptive support for claim 1 of the ’942 patent. As descriptive support for claim 1, the ’942 patent teaches treatment of leukemia or lymphoma, including chronic lymphocytic leukemia and small lymphocytic lymphoma (Ex. 1001, 16:21–22), by orally administering the Bcl-2 inhibitor GDC-0199 (Ex. 1001, 17:16) in escalating doses of 50 mg per day during a first week and 100 mg per day during a second week (Ex. 1001, Figure 2). Claim 1 of the ’942 patent, as written, does not exclude performance of the complete combination therapy shown in Figure 2. Rather, the reasonable understanding of the term “comprising” in claim 1 encompasses monotherapy with GDC-0199 alone and combination therapy with obinutuzumab. Both embodiments are described in the Specification. As Patent Owner points out, the ’942 Specification is replete with disclosures to administer GDC-0199 by itself to a patient, stating” slip op. at 16

  Patent outcomesUS 10,993,942 mixed
  Claim construction§ 112 disclosure
  Patents in suitUS 10,993,942
• Pelican Biothermal, LLC v. Va-Q-Tec AGSome claims unpatentable
  PTAB · Jun 16, 2023 · PGR2021-00085 · APJ Barry L Grossman · PGR · Final written decision

  The Board granted the motion to amend but held amended claim 64 unpatentable as anticipated by NanoCool 98596-type products and obvious over the cited combinations; all other amended claims were not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part

    “VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that Petitioner has demonstrated by a preponderance of the evidence that amended claim 64 is unpatentable; FURTHER ORDERED that Patent Owner’s Non-Contingent Motion to Amend is granted for claims 64 and denied for all other amended claims; and” slip op. at 77

  • ExcludeMotion to exclude, deniedDenied

    “A. Status as Prior Art Is a Substantive Issue, Not an Evidentiary Issue. A motion to exclude is not an appropriate mechanism for challenging the sufficiency of evidence, such as whether a reference qualifies as prior art, or the proper weight that should be afforded an argument. See Flir Systems, Inc. v. Leak Surveys, Inc., IPR2014-00411, Paper 113, 4, 8–9 (PTAB September 3, 2015); PTAB Consol. Trial Practice Guide 79 (Nov. 30 Mr. Zumwalt testifies that other NanoCool products, designated by product number 85430 and 98630, also have the same configuration as the 98830 product and are made by the same process. Thus, “the 98830, 85430, and 98630 products can be collectively referred to as ‘98830-type’ products all having the same relevant design.” Ex. 1030 ¶ 17. 2019) (“A motion to exclude . . . may not be used to challenge the sufficiency of the evidence to prove a particular fact. A motion to exclude is not a vehicle for addressing the weight to be given evidence—arguments regarding weight should appear only in the merits documents.”); Caterpillar Inc. v. Wirtgen Am., Inc., IPR2017-02187, Paper 42,17 (PTAB May 21, 2019) (status as prior art “is a substantive issue, not an evidentiary issue.”) Thus, whether the NanoCool 98830 product is prior art is not the proper basis for Patent Owner’s Motion to Exclude evidence concerning the NanoCool 98830 product.” slip op. at 29

  • Skill levelSkill level board ownOther

    “Neither Petitioner nor Mr. Harber provide any analysis of the factors pertinent to a determination of the level of ordinary skill, identified above, to support their conclusory statements. We give Mr. Harber’s conclusory testimony minimal probative weight. 37 C.F.R. § 42.64(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Moreover, there is no persuasive evidence to which we have been directed of the need for specific education or experience in biological or chemical technologies related to the claimed containers and inserts.” slip op. at 26

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “With regard to the level of ordinary skill in the art, Petitioner asserts that a person of ordinary skill would have had “a bachelor’s degree or higher degree in biological, chemical or mechanical engineering, or related sciences, and at least two to five years of experience in designing and testing ISCs [insulated shipping containers] depending on education level.” Pet. 9 (emphasis added) (citing Ex. 1002 ¶¶ 23–24). Exhibit 1002 is the Declaration testimony of Mr. Paul Haber. Mr. Harber actually states a slightly different level of ordinary skill. Mr. Harber testifies: The hypothetical POSITA would have: (i) at least a bachelor’s degree in biological, chemical or mechanical engineering, or related sciences, and have at least three to five years of experience in designing and testing ISCs [Insulated Shipping Containers][29]. Such a person may also have (ii) a higher level degree, such as a PhD and/or Master’s degree in engineering, or related sciences, and have at least two to three years of experience in designing and testing ISCs. 29 See Ex. 1002 ¶ 23. Ex. 1002 ¶ 24 (emphasis added). Mr. Harber also testifies that “[t]hese descriptions are approximate, and a higher level of education or specific skill might make up for less experience, and vice-versa.” Id.” slip op. at 25

  Patent outcomesUS 10,766,685 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,766,685

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.