• Uatp IP LLC v. Slick Slide LLCSome claims unpatentable
  PTAB · Oct 2, 2026 · PGR2024-00054 · APJ Brian D Range · PGR · Final written decision

  Claims 22–26 are unpatentable based on obviousness; claims 1–17, 27, and 28 were not shown unpatentable. Patent Owner’s motion to terminate was denied.

  RulingsFinal written decision

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “1. Mesh Layer Petitioner contends “no formal claim construction is necessary in this” slip op. at 13

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “5. Analysis On this complete record, we determine that Petitioner’s arguments do” slip op. at 31

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “form of nylon and some form of Teflon (and possible combinations thereof) having the specific coefficient of friction range given in limitation [1c] breaks down, because the building blocks of the obviousness argument are not sufficiently identified in Phillips alone, nor in the supporting testimony. Accordingly, we determine that Petitioner’s arguments and evidence fail to show that Phillips renders the challenged claims obvious. 6. Conclusion Based on the foregoing, we determine that Petitioner has not established by a preponderance of the evidence that claims 1–4, 6, and 7 would have been anticipated by or obvious in view of Phillips.” slip op. at 33

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “2. Products and Nexus We first consider the issue of whether certain evidence relied upon by” slip op. at 20

  Patent outcomesUS 11,998,854 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 11,998,854
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.All claims unpatentable
  PTAB · Sep 28, 2026 · IPR2025-00611 · APJ Christopher L Ogden · IPR · Final written decision

  Claims 1–10, 12, 13, 19, and 20 are unpatentable under § 103 over the stated Douglas–Mark and Hamilton-based grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The parties agree that experience could substitute for a degree, and vice versa. Pet. 3; PO Resp. 10. The parties’ proposed levels of ordinary skill are substantially similar. For this decision, as in the Institution Decision, we adopt Petitioner’s proposed level, which is supported by credible testimonial evidence and is consistent with the problems addressed in the ’774 patent. See Ex. 1001, 1:16–52. Our decision would be the same, however, if we were to adopt Patent Owner’s proposal.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Other

    “Neither Petitioner nor Patent Owner argues that we need to construe any claim terms explicitly. See Pet. 2–3; PO Resp. 10. However, the parties contest two material claim-construction issues which we address below. To the extent that the parties’ positions depend on interpreting other claim language in a particular way, we discuss the relevant claim language below in the context of the parties’ arguments regarding the prior art.” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We disagree with Patent Owner that a person of ordinary skill in the art would have understood that limitation 1.2 must be performed before limitations 1.3 or 1.4. See Ex. 1001, 35:21–24. See Interactive Gift Exp., Inc. v. Compuserve Inc., 256 F.3d 1323, 1342 (Fed. Cir. 2001) (“Unless the steps of a method actually recite an order, the steps are not ordinarily construed to require one.” (citing Loral Fairchild Corp. v. Sony Corp., 181 F.3d 1313, 1322 (Fed. Cir. 1999)). The evidence suggests that a “target printer” is any printer that is ultimately selected for fabricating the object, and such a printer could send its configuration information either before or after that determination is made in limitation 1.2. This interpretation does not render the word “target” meaningless. At some point, a printer must be determined to be the target printer, which is the one intended to ultimately fabricate the three-dimensional object. But the target printer still exists, and is capable of being queried, before that determination is made. We find the examples in the ’774 patent pertinent to this question. The ’774 patent states that “the target printer may include more than one printer.” Ex. 1001, 18:66–67. In discussing the step of “query target printer for properties 306” (Fig. 3A), the ’774 patent states that “[i]n one aspect, numerous queries are sent to numerous printers, e.g., for use in selecting one or more of the printers as the target printer.” Id. at 19:8–10. Alternatively, “the query is sent to a printer that is not necessarily the target printer as described herein, e.g., when the query or information received from a response to the query is used for the selection of the target printer.” Id. at 19:11–14. Importantly, the second embodiment states that the queried printer “is not necessarily the target printer,” suggesting that the queried printer could be the target printer even before it is determined to be such. Id. at 19:11–12 (emphasis added). Based on the evidence of record, a person of ordinary skill in the art would have understood that the “target printer” can be determined after the query recited in limitation 1.3 or the reception of configuration information recited in limitation 1.4. Thus, the evidence does not impose an ordering between limitations 1.2 and 1.3 or between limitations 1.2 and 1.4. The evidence also does not support Patent Owner’s argument that the two reverse-order examples in the ’774 patent are unclaimed embodiments.” slip op. at 10

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation foundDecided for petitioner

    “We disagree that Petitioner’s arguments are based on impermissible hindsight, because they are based on the disclosures in Douglas and Mark, and Petitioner has articulated a persuasive reason to combine those references without referring to the ’774 patent itself, as we discuss below. See In re McLaughlin, 443 F.2d 1392, 1395 (CCPA 1971) (an obvious rationale is not improper hindsight if it “takes into account only knowledge which was within the level of ordinary skill at the time the claimed invention was made and does not include knowledge gleaned only from applicant’s disclosure”).” slip op. at 29

  Patent outcomesUS 11,886,774 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,886,774
• Arashi Vision (U.S.) LLC (D/B/A Insta360) v. Gopro, Inc.Some claims unpatentable
  PTAB · Nov 26, 2025 · IPR2024-00984 · APJ Nabeel U Khan · IPR · Final written decision

  Claims 6 and 7 are unpatentable as obvious over Meulen and Chao; claim 1 was not shown unpatentable because Meulen does not disclose transforming an image captured by its camera.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner argues that a person of ordinary skill in the art in the relevant field “would have a bachelor’s degree in engineering or computer science, or equivalent field, and two years of experience working on image or video processing, or digital cameras,” or alternatively “would have four years of experience working on image or video processing, or digital cameras.” Pet. 6. Petitioner further argues that an “advanced graduate degree” may “make up for the work experience.” Id. (citing Ex. 1002 ¶¶ 33–34). “Patent Owner applies Petitioner’s proposed level of skill.” PO Resp. 4–5 (citing Ex. 2027 ¶¶ 19–20). We adopt Petitioner’s proposed level of ordinary skill because it is consistent with the level of skill in the art at the time of the invention as reflected by the ’413 patent and the cited prior art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “From the outset we note that the words of the claim recite “non- uniformly shift[ing] the pixels” and do not recite a “non-linear” transformation. This favors Petitioner’s position, which is based directly off the definition of “non-uniform,” over Patent Owner’s position, which substitutes “non-linear” for “non-uniform.” Generally, then, we would determine the ordinary and customary meaning of the claim term in the context of the entire Specification. Here, however, the ʼ413 patent does not mention “uniform” or “non-uniform” shifting of pixels anywhere except in the claims. The Specification, therefore, provides limited guidance, by itself, as to the ordinary and customary meaning of the term. Nonetheless, even reviewing the portions of the Specification cited by the parties, we see no clear or unambiguous effort to limit the challenged claims to require only non-linear transformations in which the pixels to which a transformation is applied do not have the same amount of shift. is not non-linear. Pet. Reply 1. Specifically, Petitioner argues that the center circle of Figure 2B maintains the original circular shape after the transformation is applied to the image which contradicts Patent Owner’s argument that no two pixels will have the same amount of shift. Pet. Reply 1–2. We agree. In Figure 2B of the ʼ413 patent, the center of the image is chosen to be the region of interest. Ex. 1001, 4:19–21. After the input image goes through linear scaling (step 204) and then non-linear warping (step 206) the circles become more vertically compressed as they approach the top and bottom edges and more horizontally stretched as they approach the left and right edges. Id. at 4:22–30. But “the center circle is fully corrected so that it maintains the original circular shape of the corresponding circle in the input image 212.” Id. at 4:23–25. This means that at least some pixels, such as those of the center circle, undergo the same amount of shift after being transformed.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “readable instructions” of claims 1 and 2 must occur in a particular order. Specifically, Patent Owner argues that the step of “determine a portion within the input image” must occur after “obtain[ing] an image” and before “apply[ing] a transformation to the input image.” PO Resp. 17 (citing Ex. 2027 ¶ 59). Petitioner argues, on the other hand, that the specification does not require such an order and, in fact, describes an embodiment where such an order is not followed. Pet. 3. We determine that the “determine a portion within the input image” step does not need to occur after the “obtain an image” step and before the “apply a transformation to the input image” step. As Patent Owner itself points out, claims 1 and 2 are apparatus and system claims respectively, and an ordering of the limitations of such claims is not necessary. PO Resp. 17. Even if we were to treat the apparatus and system claims as reciting the steps of a method, “as a general rule the claim is not limited to performance of the steps in the order recited, unless the claim explicitly or implicitly requires a specific order.” Baldwin Graphic Systems, Inc. v. Siebert, Inc., 512 F.3d 1338, 1345 (Fed. Cir. 2008) (citing Interactive Gift Express, Inc. v. Compuserve Inc., 256 F.3d 1323, 1342–43 (Fed. Cir. 2001)). We see nothing in the claims that would cause us to break this general rule. Patent Owner argues that the claims imply a “specific order because the ‘determine a portion’ requirement operates on ‘the [obtained] input image’ and defines the ‘portion’ that is necessary for the 23; Ex. 2027 ¶ 59). Although the steps are recited in a specific order in the claim, as they necessarily must be, the claim does not expressly specify that the certain steps must occur before or after other instructions, nor does logic imply such a requirement. For example, if certain characteristics of the image are known before the image is obtained (e.g. the size, dimensions, resolution, aspect ratio, or content etc.) the determination of the portion of the image could be made before the image is obtained. These characteristics may be based on the specific device taking the image or the subject matter of the image, both of which may be known before the image is captured or obtained. It is, therefore, not necessary that the image be obtained in order for a portion of the image to be determined. Similarly, we do not find the written description to expressly or implicitly specify an order the claimed step of “determine a portion of the input image.” For example, the written description of the ʼ413 patent states that in Figure 2B “the center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction as the frame boundary is approached.” Ex. 1001, 4:19–22. Patent Owner emphasizes that this disclosure implies that an input image is obtained before the center portion is chosen. PO Resp. 19 (citing Ex. 1001, 3:63–64, 4:19–22). But the description of this embodiment does not expressly recite an order. For example, the description of Figure 2A explains that “an input image is obtained” in step 202, “the image is then scaled” in step 204, and a “non-linear warping is then applied” in step 206. Ex. 1001, 3:63–4:3. This description does not mention “determin[ing] of a portion of the image” as a separate step or as part of the listed steps, and therefore, does not specify an order in which this step must occur. is configured so that some areas of the image are fully corrected geometrically, while some other areas are distorted. . . . [T]he center of the image is chosen to be the region of interest that is most fully corrected and the distortion increases in each direction.” Id. at 4:17–19. This excerpt from the ʼ413 patent, which the Patent Owner specifically relies on (PO Resp. 19), also does not specify an order in which the determination step (choosing of the region of interest) takes place. Moreover, because the ʼ413 patent states that the warp module is configured so that some areas are fully corrected while others are not, the determination step could take place at the time the warp module was configured, presumably before the image was obtained. Finally, the ʼ413 patent states that “in the case, of video, the area may dynamically change between images (e.g. to follow a moving object).” Ex. 1001, 4:34–36. Patent Owner argues that this description “requires first obtaining the image in order to locate the object that is being followed.” PO Resp. 19–20. This embodiment is related to the case of video or a moving object, which the challenged claims do not mention. We, therefore, decline to limit the scope of the claim based on this embodiment. Phillips v. AWH Corp., 415 F.3d 1303, 1323 (Fed. Cir. 2005) (en banc) (“[A]lthough the specification often describes very specific embodiments of the invention, we have repeatedly warned against confining the claims to those embodiments.”).” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “Having reviewed the parties’ arguments and cited evidence we determine Petitioner has established, by a preponderance of the evidence, that a POSITA would have been motivated to combine Meulen and Chao. For example, Petitioner argues that “[i]t would have been obvious that when performing image scaling, pixels from the input to output positions are shifted based on a scaling factor.” Pet. 91. Meulen teaches scaling but does not provide the details regarding scaling. E.g., Ex. 1007, 1:55–56, 4:37–49. We agree that in light of Meulen’s disclosure of scaling, a POSITA would have looked to other references, such as Chao, for further details on how to perform scaling. Dr. Katsaggelos provides credible support, testifying that “Meulen mentions ‘compression and/or scaling,’ and provides details on how to perform compression. But Meulen does not disclose the details of how to perform scaling. A POSITA when faced with Meulen and having the knowledge about scaling would have been motivated to turn to a prior art reference that discloses the details of scaling.” Ex. 1002 ¶ 262. Patent Owner argues that Petitioner provides no motivation to combine other than asserting that it involves combining prior art elements. PO Resp. 35 (quoting Pet. 92). As explained above, however, Petitioner does more than just assert that the motivation involves combining prior art elements. Instead, Petitioner explains that Meulen discusses both compression and scaling, and provides details regarding compression but does not provide details on how to scale. Pet. 91–92; Ex. 1002 ¶¶ 262–262. Thus, Meulen teaches that scaling was a known technique. See Hybritech, (“a patent need not teach, and preferably omits, what is well known in the art”). Dr. Katsaggelos testifies that, in this situation, a POSITA would have looked to Chao for details regarding scaling. Ex. 1002 ¶¶ 262–263. We determine this establishes, by a preponderance of the evidence, that a POSITA would have had reason to combine Meulen’s teachings with Chao. Patent Owner draws a distinction between Meulen and Chao, arguing that “Meulen is concerned with modifying content from a media source to be displayed on a device’s screen while Chao, by contrast, is directed to changing the aspect ratio of a document intended for printing.” Id. at 36 (citing Ex. 2027 ¶¶ 89–90). Patent Owner’s argument is contradicted, however, by Chao’s disclosure which states that “after all the background and foreground elements in the image have been resized . . . [t]he image may be output by displaying the image on or as part of: a display screen such as a computer monitor, camera screen, printer screen, printed page, projected image, or the like.” Ex. 1008 ¶ 32. Patent Owner argues that Meulen’s system avoids distortion near the middle where the user’s focus is more likely to be, while Chao, on the other hand, is directed to avoiding distortion of stylized borders on differently sized pages. PO Resp. 36–37 (citing Ex. 1006, 1:26–29; Ex. 1008 ¶¶ 1, 25; Ex. 2027 ¶¶ 91–92). This argument reads the prior art too narrowly and does not address Petitioner’s combination. Petitioner does not rely on Chao for its teaching of avoiding distortion near the borders of the image, but rather on its teaching of scaling the image while maintaining the design intent of the original image. Ex. 1008 ¶ 22; Ex. 1014 ¶ 67. Thus, Petitioner is applying Chao’s techniques of scaling (regardless of where the area of 92. Finally, Patent Owner argues that Chao’s approach of stretching/shrinking only the background and uniformly scaling entire foreground objects is suitable for graphic design but incompatible with Meulen which is concerned with adapting externally derived media source content for display on a fixed size screen. PO Resp. 37–38 (citing Ex. 2027 ¶ 93). We disagree with Patent Owner’s argument because it does not address Petitioner’s combination. Petitioner relies on Chao’s teaching of stretching/shrinking of background elements and applies that stretching/shrinking to Meulen’s images displayed on its screen. Pet. 91–92 (citing Ex. 1008 ¶¶ 28, 63; Ex. 1002 ¶ 263). The fact that Chao applies its teaching to graphic design does not prevent a POSITA from applying those teachings to Meulen’s media content displayed on its screen.” slip op. at 20

  Patent outcomesUS 10,015,413 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,015,413
• Apple Inc. v. Resonant Systems, Inc.Some claims unpatentable
  PTAB · Oct 9, 2025 · IPR2024-00806 · APJ Norman H Beamer · IPR · Final written decision

  Claims 1–8, 15–17, and 20 are unpatentable under § 103; claims 14 and 19 were not shown unpatentable because the proposed paramagnetic flux paths in Wakuda lacked adequate support.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner’s expert declarant contends that person of ordinary skill in the art (POSITA) would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 33. Patent Owner offers “a similar level of ordinary skill in the art.” PO Resp. 3. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’830 patent specification.” slip op. at 11

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “The parties agree that independent claims 1, 19, and 20 include means plus function limitations under 35 U.S.C. § 112 ¶ 6.8 Pet. 3–7; PO Resp. 6–14. An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claims 1, 19, and 20 are means plus function limitations. Pet. 3–7; PO Resp. 6–14. Construing a means plus function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 12

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed board ownDecided for petitioner

    “Therefore, the specification clearly links the function of “control[ing] supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” at least to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.11 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs to the switch; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law 11 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:17–20. that limits the structure to that necessary to perform the claimed function. 12 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 18

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner

    “to include the ability disclosed in Ramsay to allow a user to customize and store parameters associated with haptic effects, such as creating “haptic track files” that specify variations in the amplitude and frequency of the effect over time to achieve a desired effect. Pet. 46–47 (citing Ex. 1006 ¶¶ 15, 25– 28, 37; Ex. 1003 ¶¶ 192–193). Petitioner argues that this combination would have been motivated by the desire to expand the functionalities of haptic devices to allow end users to create and customize haptic effects, to provide a fuller haptic experience, and to be able to store haptic effects to save processing power compared to real-time generated effects. Id. at 47–49 (citing Ex. 1006 ¶¶ 14–15, 30, 47, 53–57; Ex. 1003 ¶¶ 194–196). Petitioner argues that this making combination would have had a reasonable expectation of success given that both references deal with linear actuators, both disclose storing frequency and amplitude values, and the combination involves routine knowledge of software techniques. Id. at 49–50 (citing Ex. 1004, 2:3–9; Ex. 1006 ¶¶ 17, 26–28; Ex. 1003 ¶¶ 197–198). Petitioner further argues that it would have been obvious to use the H-bridge switch of Rossi as part of the Gregorio actuator drive circuit 16 in the asserted Gregorio-Ramsay combination to periodically switch the polarity of drive signals to electric coil 28 of Gregorio, and thus oscillate magnet 27, under the control of a signal from processor 12 of Gregorio. Pet. 56 (citing Ex. 1003 ¶ 211). Petitioner argues that this combination would have been motivated because Gregorio does not disclose implementation details and therefore one of ordinary skill would have looked toward teachings like Rossi to fill in those details, and that an H-bridge switch was a well-known example circuit for implementing a change in “current flow direction/polarity” for “push” and “pull” actions in a system, and was a simple, cost-effective, and reliable circuit design. Id. at 56–58 (citing Ex. 1020, Abstr., Figs. 4, 6, 1:65–3:54; Ex. 1003 ¶¶ 212–217). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques through routine circuit design considerations and software instructions for generating the control signal. Id. at 58 (citing Ex. 1003 ¶ 218). Petitioner further argues that it would have been obvious to modify the Gregorio-Ramsay-Rossi combination, using the control algorithm disclosed in Aldrich, to replace the monitoring technique of Gregorio with that of Aldrich to maintain a resonance frequency by incrementing or decrementing the drive frequency. Pet. 58–59 (citing Ex. 1004, 4:22–28, 4:42–48; Ex. 1021, 2; Ex. 1003 ¶ 219). Petitioner’s expert provides implementation details of Aldrich, including that the Aldrich hill-climb technique would use a Boolean value to indicate whether the frequency was being increased, with local variables set to default values, and use integer values when processing sensor signals. Id. at 59–60 (citing Ex. 1021, 2; Ex. 1003 ¶¶ 220–222). Petitioner argues that these modifications would have been motivated to improve the Gregorio system using the Aldrich feedback algorithm for targeting a resonant frequency, given that the Gregorio approach had shortcomings that required a monitoring period with reduced haptic feedback, receiving weak EMF signals. Id. at 61–62 (citing Ex. 2004, 3:65–5:55, 5:63–65; Ex. 1021, 1–3; Ex. 1003 ¶¶ 223–227). Petitioner argues that making this combination would have had a reasonable expectation of success given that it involved known techniques for improvement to yield predictable results, readily implemented via software executed by the microprocessor. Id. at 62–63 (citing Ex. 2004, 2:44–50; Ex. 1021, 2; Ex. 1003 ¶ 229). Patent Owner does not address Petitioner’s arguments regarding the” slip op. at 27

  Patent outcomesUS 9,941,830 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,941,830
• Apple Inc. v. Resonant Systems, Inc.All claims unpatentable
  PTAB · Oct 9, 2025 · IPR2025-00680 · APJ Karl D Easthom · IPR · Final written decision

  Claims 2 and 3 are unpatentable under § 103 over Gregorio, Ramsay, Tierling, Rossi, and Aldrich; claim 2 is also unpatentable over Gregorio, Ramsay, Wakuda, Rossi, and Aldrich.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the advanced-level degree. Ex. 1003 ¶ 30. Patent Owner offers “a similar level of ordinary skill in the art.” See PO Resp. 4. Based on a review of the record, we adopt Petitioner’s proposed level of ordinary skill in the art because it is consistent with the evidence of record, including the asserted prior art and ’337 patent specification.” slip op. at 9

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)§112(f) appliesDecided for petitioner

    “An element in a claim for a combination may be expressed as a means . . . for performing a specified function without the recital of structure, material, or acts in support thereof, and such claim shall be construed to cover the corresponding structure, material, or acts described in the specification and equivalents thereof. 35 U.S.C. § 112 ¶ 6. In particular, the parties agree that the “driving component” and “control component” requirements of independent claim 2 are means-plus-function limitations. Pet. 2–6; PO Resp. 7. Construing a means-plus-function limitation under 35 U.S.C. § 112 ¶ 6 involves two steps: 1) identifying the claimed function and 2) identifying in the specification the corresponding structure that performs the claimed function. Med. Instrumentation & Diagnostics Corp. v. Elekta AB, 344 F.3d 1205, 1210 (Fed. Cir. 2003); Cardiac Pacemakers, Inc. v. St. Jude Med., Inc., 296 F.3d 1106, 1119 (Fed. Cir. 2002).” slip op. at 10

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Corresponding structure / algorithm (indefinite if none)Term construed petitioner constructionTerm construed board ownMixed

    “supply of power from the power supply to . . . cause the moveable component to oscillate at a frequency . . . specified by one or more stored values” to portions of steps 706 and 708 of the flow diagram algorithm of Figure 7A, as described above. Thus, the control component requires a microprocessor and memory with algorithmic structure including a timing algorithm or similar coding for creating a control output signal that flips to control the direction of current flow through a coil (e.g., coil 514, Fig. 5, coil 626, Fig. 6), where the coil is structure that corresponds to the recited “driving component,” as noted above.10 We adopt the District Court’s conclusion in the Apple litigation that the “control component” structure itself does not require an H-bridge switch, but only requires that the processor generates the “d” inputs configured to operate a switch or other circuit; and further that the structure does not require does not require computing initial default values as specified in step 702 of Figure 7A (i.e., values not specified by a user). Ex. 3001, 30–33, 35. This is in accord with settled law that limits the structure to that necessary to 10 “Rather than using a formal timer mechanism, certain implementations may simply employ counted loops or other simple programming techniques for periodically carrying out tasks.” Ex. 1001, 7:7–10. perform the claimed function. 11 By the same token, we modify the District Court’s construction to the extent it would require, based on such steps as 706, 710, and 716, a specific order of the steps of generating the “p” and “d” values. The claims only require the control component to control the power supply to cause oscillation at a specified frequency and amplitude, but do not require the frequency value to be generated before the amplitude value, or vice versa.” slip op. at 17

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “The record, including testimony by Dr. Hannaford (Ex. 1003; Ex. 1049), supports Petitioner’s rationale, and shows that one of ordinary skill would have been motivated to combine Gregorio, Ramsay, and Wakuda in the manner proposed. Patent Owner does not address Petitioner’s showing for combining these references with any particularity. See generally PO Resp. We discuss below Patent Owner’s argument that Petitioner’s showing as to limitation 2.f based on the combination of Gregorio and Ramsay is conclusory.” slip op. at 34

  Patent outcomesUS 8,860,337 unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 8,860,337
• Apple Inc. v. Geoscope Technologies Pte. Ltd.All claims unpatentable
  PTAB · May 28, 2025 · IPR2024-00255 · APJ Annette R Reimers · IPR · Final written decision

  Claims 2, 4, and 6–10 are unpatentable as obvious over Bhattacharya and Zeng, and over Bhattacharya, Zeng, and Spain; claims 1, 3, and 11 were disclaimed.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “Second, the key differences between Petitioner’s and Patent Owner’s proposed qualifications for a person of ordinary skill in the art at the time of the invention is that Patent Owner asserts “experience in wireless telecommunications and cellular technology is necessary,” as well as a background in radio frequency communications and/or navigation system technology with two years of industry experience working in the same, would be required. PO Resp. 22–23 (citing Ex. 2018 ¶ 46); see also id. 44– 45. The ’104 patent is directed to locating a wireless mobile device in a geographic region. Ex. 1001, 1:13–20; PO Resp. 44. Bhattacharya is 9 Patent Owner refers to IPR2024-01209, but the correct citation is IPR2023- 01209. See PO Resp. 22. 1005, code (57), ¶¶ 1, 13; PO Resp. 44. Zeng is directed to handoff from one cell to another in a wireless cellular communication system to achieve continuous service. Ex. 1006, 1; PO Resp. 44. Spain is directed to a method for locating the concentration of mobile radio traffic in a coverage area. Ex. 1007, code (54), ¶¶ 1, 11; PO Resp. 44. We find that there is support in the ’104 patent and prior art consistent with Patent Owner’s assertion that the qualifications of a person of skill in the art would include knowledge of radio navigation and mobile communications technology. Accordingly, we adopt Patent Owner’s proposed qualifications for a person of ordinary skill in the art.” slip op. at 8

  • Expert testimonyPetitioner expert creditedMixed

    “In this case, Patent Owner attempts to make much of Dr. Sundaresan’s statement that he had been informed of the qualifications of a person of ordinary skill in the art. See PO Resp. 41–43. Dr. Sundaresan’s testimony, however, set forth this understanding of the requisite level of skill in the art (Ex. 1003 ¶ 8). In his supplemental declaration, Dr. Sundaresan further testifies that: I agreed with this POSITA definition when preparing the Declaration, and I continue to hold the opinion that the POSITA definition is both correct and appropriate based on the disclosures of the ’104 patent and the prior art analyzed in the Declaration. Ex. 1055 ¶ 17. Dr. Sundaresan further testifies that “[i]f I did not agree with the POSITA definition, then it would not have been included in paragraph 8 of the Declaration.” Id. ¶ 18. Dr. Sundaresan’s inclusion of the definition of the level of ordinary skill in his original declaration indicates that he agrees with the definition, as confirmed by his cited subsequent testimony. We note that, even with Patent Owner’s arguments, the record is clear that Patent Owner was on notice of Petitioner’s proposed definition of the level of ordinary skill at the time of the Petition. Pet. 7; cf. Corephotonics, Ltd. v. Apple Inc., 84 F.4th 990, 1006 (Fed. Cir. 2023) (holding that Petitioner is not required to anticipate all arguments in its Petition and allowing consideration of reply where patent owner had sufficient notice of petitioner’s position and adequate opportunity to respond).” slip op. at 14

  • BurdenUnpatentable

    “Based on the evidence presented, Petitioner adequately establishes by a preponderance of the evidence that a person having ordinary skill in the art would have had reason to reach the Bhattacharya-Zeng combination with a reasonable expectation of success.” slip op. at 44

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “explained below, we agree with Petitioner that Patent Owner’s additional requirement of evaluating the calibration data to determine the boundaries of the area represented by a grid point should not be included in the construction of either “grid point” or “non-uniform grid point.” Instead, based on the full record, we discern no reason to alter our prior construction of “grid point” as “a point associated with representative calibration data for an area” and maintain that construction for this Final Written Decision. The construction of “grid point” we adopt is supported by the Specification of the ’104 patent. Namely, the ’104 patent discloses that “[i]n general, a non-uniform grid point (NUG) may represent the signal characteristics and/or calibration data over a given region,” and “NUGs represent an area of collected calibration data.”18 Ex. 1001, 3:50–60. The district court identified the second quoted passage, which is identically recited in the ’104 patent (see Ex. 2018, 3:56–60) as “provid[ing] a clear indication of the meaning of ‘grid point.’” Ex. 2012, 19 (emphasis added). We agree with the district court’s analysis. Although the ’104 patent does not explain how a generic “grid point” might differ from the described “nonuniform grid point,” we do not find this distinction pertinent to construing “grid point” in this case because neither party raises this issue. Also, based on the claim wording “non-uniform grid point,” a “non-uniform grid point” is a type of grid point. See Pet. Reply 3 (explaining why that plain meaning supports Petitioner’s proposed construction). Furthermore, the district court construed “grid point” only, not “non-uniform grid point.” Ex. 2012, 18–20.” slip op. at 27

  Patent outcomesUS 7,561,104 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,561,104
• Fusion Orthopedics, LLC v. Extremity Medical, LLCSome claims unpatentable
  PTAB · Nov 4, 2024 · IPR2023-00894 · APJ Robert A Pollock · IPR · Final written decision

  Claims 1–10 and 12–15 are unpatentable; claim 11 was not shown unpatentable. Substitute claims 16–25 and 27–30 are unpatentable over Mazur; claim 26 was not reached.

  RulingsFinal written decision

  • BurdenMixed

    “It is of the utmost importance that petitioners in the IPR proceedings adhere to the requirement that the initial petition identify ‘with particularity’ the ‘evidence that supports the grounds for the challenge to each claim.’” Intelligent Bio-Sys., Inc. v. Illumina Cambridge Ltd., 821 F.3d 1359, 1369 (Fed. Cir. 2016) (quoting 35 U.S.C. § 312(a)(3)). Here, however, not until its Reply does Petitioner belatedly suggest that Ferrante’s disclosure of bone screws with self-tapping ends equally meets the limitation of claim 10 (with respect to the first member) as with claim 11 (with respect to the second member), and that both claims are obvious in light of “evidence” from Ferrante “that it was well known to equip bone screws with self-tapping ends.” Reply 26–27. We do not discern these arguments in the Petition, and consider them waived. See Netflix, Inc. v. DivX, LLC, 84 F.4th 1371,1377 (Fed. Cir. 2023) (“While the Board should not take an overly mechanistic view of a petition and decline to address an argument because the petitioner did not present it with ideal vigor and clarity, the Board should also not have to decode a petition to locate additional arguments beyond the ones clearly made.”). In sum, Petitioner’s error in failing to first address limitations of claim 10 in the Petition specific to the Cognet/Ferrante combination indicates a failure to meet the particularity requirements for what must be in the petition and cannot be left to be filled in on reply. See 35 U.S.C. § 312(a)(3); 37 C.F.R. §§ 42.22(a)(2) (requiring, among other things, “a detailed explanation of the significance of the evidence”), 42.104(b)(4)–(5) (requiring that petition “specify where each element of the claim is found in the prior art patents or printed publication relied upon” and, regarding submitted evidence, state “the relevance of the evidence to the challenge raised, including identifying specific portions of the evidence that support the challenge”). Microsoft, 2022 WL 989403, at *6. Accordingly, Petitioner has not shown persuasively that claim 11 would have been obvious in light of Cognet and Ferrante for the reasons set forth in the Petition. slip op. at 41

  • Expert testimonyPetitioner expert creditedDecided for petitioner

    “We also find persuasive Mr. Dominguez’s explanation that one of ordinary skill in the art would have understood “bore” as including stepped diameter holes, sometimes described as a bore having a counterbore. See generally Ex. 1018 ¶¶ 4–29; Reply 3–10. Three of Mr. Dominguez’s illustrative examples are reproduced in the annotated figures below. The above figures show Mr. Dominguez’s annotated illustrations from the Jackson (Ex. 1019, Fig. 3), Brånemark (Ex. 1021, Fig. 4), and Ray (Ex. 1025, Fig. 1) references as discussed at paragraphs 10, 12, and 13, respectively, of Mr. Dominguez’s Second Declaration. With reference to the above figures, Mr. Dominguez testifies that “Jackson describes a bone repair set screw in which ‘[t]he bore 27 comprises a first bore section 31, a second bore section 32,’ etc. delineated by shoulders 41, 42, etc. (Ex. 1019, 5:24– 43)” (Ex. 1018 ¶ 10); “Brånemark describes an osseous implantation device having body 1ʺ with first and second holding portions 21ʺ, 31ʺ and ‘an inner through bore with a first portion 4ʺ in the first holding portion and a second portion 5ʺ in the second holding portion.’” Ex. 1021, 4:44–46” (id. ¶ 12); and Ray discloses surgical calipers including “handle 12 having ‘stepped cylindrical bore 14,’” wherein “[c]ollar 20 of a shaft inserted in the bore ‘rests against a step of the bore 14’ (2:14–15)” (id. ¶ 13). Patent Owner responds that Mr. Dominguez’s examples “that allegedly show a single bore encompassing two or more stepped-diameter holes or a counterbore . . . . are specific to these references and divorced from the disclosures of the ’166 patent.” Sur-Reply 7. Insofar as the ’166 patent makes no mention of the term “bore” outside the claims, and Mr. Dominguez’s examples are all taken from the field of orthopedic surgery, we do not find this argument persuasive. Patent Owner further appears to contend that exemplary references to a “cylindrical stepped down bore” or a “stepped cylindrical bore” are too specific to be within the scope of the term “bore.” Sur-Reply 7–8. As these terms merely describe species within a larger genus, and Patent Owner presents no cogent reason to exclude them, we do not find this argument availing. Relatedly, we are also not persuaded by Patent Owner’s argument that “the prior art treats a ‘bore’ as an element that is distinct from a ‘counterbore.’” Id. at 8. Rather, we credit Mr. Dominguez’s testimony that “[a] counterbore is not a structure unto itself, a counterbore is part of a larger structure” as exemplified by numerous examples including Laps (Ex. 1028 ¶ 33 (sensor assembly wherein “bore 16 includes a counterbore 18”)); Martinez (Ex. 1029, 3:61 (surgical cutting instrument wherein “bore 56 has a counterbore 64”)); Zang (Ex. 1030, 2:49 (bone anchor having a “bore [that] includes a counterbore”)); Ledet (Ex. 1022, 29:3–5 (vertebral fixation plate having “through holes . . . . countersunk, or counterbored to accommodate the head of a bone screw”)); Seo (Ex. 1031, 3:45 (chair leg employing “counterbored bore 23”)); and Exner (Ex. 1032, 2:16 (extrusion press including “counterbored axial bore 6”)). Ex. 1018 ¶¶ 17–23. That a reference may refer to a figure as showing “bore 103” with “counterbore 105 . . . formed on one end” does not indicate that they are distinct structures as Patent Owner contends, but merely that the focus of each term is directed to the entire bore or to a particular aspect of the bore, i.e., its counterbore. See” slip op. at 22

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner subsequently proposed an alternative definition, as a person having “[a] Bachelor’s Degree in biomedical and/or mechanical engineering or similar training and . . . at least three years of experience with implant devices used for internal fixation of bones.” POR 5 (citing Ex. 2012 ¶¶ 32–33). According to Patent Owner, “[t]his hypothetical person would be capable of performing various design tasks and would understand the basic mechanical features and operation of orthopaedic implant devices [and] have an appreciation for orthopaedic fusion techniques and the medical issues and concerns faced by a doctor/surgeon charged when performing operations to implant orthopaedic devices.” Id. Despite some differences in wording, Patent Owner asserts (and Petitioner does not contest) that any “distinction between the parties’ proposed definitions of a POSITA does not affect the arguments set forth herein.” Id. (citing Ex. 2012 ¶ 34). Consistent with this view, we find the parties’ constructions equally applicable in light of the prior art of record and the disclosure of the ’166 patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (“the prior art itself [may] reflect[] an appropriate level” as evidence of the ordinary level of skill in the art) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)). We adopt, for convenience, Petitioner’s definition, but our analysis does not change depending on which of the two articulations are applied here. H.” slip op. at 12

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “one of ordinary skill in the art would understand that “bore,” as used in the context of claims 1 and 12, encompasses a multi-diameter passage, and in particular, one having stepped longitudinal cross sections such as that shown in Cognet’s Figure 1. See generally DI 11–13. For the reasons that follow, we conclude that one of ordinary skill in the art would have understood “bore” as such. Relying on the testimony of Mr. Dominguez, Petitioner initially proposed a construction of “bore” as “a usually cylindrical hole made by or as if by the turning or twisting movement of a tool.” Pet. 16 (citing Ex. 1002 ¶ 58). Petitioner’s proposal relied on Mr. Dominguez’s testimony that “[a] bore is a cylindrical hole made by the spinning rotation of a twist drill cutting tool. It is typically made by removing material from a solid or hollow object, similar to a tunnel or orifice.” Ex. 1002 ¶ 58. Pointing to its annotation of Cognet’s Figure 1, above, Patent Owner argued that that the term “bore” excludes a tunnel made by “two adjacent bores.” See Prelim. Resp. 21–25. In view of the then-available evidence, we provisionally construed “bore” as a hole or passage made by or as if by the turning or twisting movement of a tool such that its interior walls have cylindrical lateral cross-sections, and which do not exclude holes or passages having tapered or stepped longitudinal cross-sections. DI 13.” slip op. at 19

  Patent outcomesUS 11,298,166 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 11,298,166
• Apple Inc. v. Resonant Systems Inc., D/B/A/ RevelhmiInstituted
  PTAB · Oct 21, 2024 · IPR2024-00697 · APJ Brian D Range · IPR · Institution

  The Board instituted IPR on claims 1–5 on all petitioned grounds, finding a reasonable likelihood that Apple would prevail on at least one claim.

  RulingsInstitution decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “would have had a degree in mechanical engineering, electrical engineering, physics, or a related technical field, and at least 2–3 years of experience related to the design or development of systems incorporating linear actuators; additional years of experience could substitute for the degree. Pet. 4 (citing Ex. 1003 ¶ 30–31). Patent Owner contends a POSITA would have had (1) a bachelor’s degree in electrical engineering, mechanical engineering, or a comparable field of study, and (2) at least two years of professional experience with electro-mechanical control systems, or other similarly relevant industry experience. Prelim. Resp. 3. Additional relevant industry experience may compensate for lack of formal education or vice versa. Id. Patent Owner further contends this is similar to Petitioner’s POSITA contention. Id. For purposes of this Decision, we adopt Petitioner’s proposal as reasonable and consistent with the ’767 patent specification and the prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art may reflect an appropriate level of skill in the art).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner contends “the preamble of claim 1 is limiting based on Petitioner’s assertion in the District Court and based on the District Court’s order.” Prelim. Resp. 6. Patent Owner also contends “the District Court agreed with Patent Owner and ordered that the ‘control component’ term has its plain and ordinary meaning and is not subject to means-plus-function treatment.” Id. Patent Owner finally contends “there is no need for the Board to make claim construction determinations about Section 112, Paragraph 6 to decide institution.” Id. As to the preamble, we agree, for purposes of this decision, that claim 1’s preamble is limiting. The parties agreed that this preamble is limiting in the District Court case. Dist. Ct. Const. 10.” slip op. at 10

  • Claim Construction › Functional claiming / §112(f) means-plus-function › Whether §112(f) applies (Williamson, nonce words)Term construed board ownTerm construed patent owner constructionMixed

    “As to the “driving component” recitation, the parties agreed to a construction in the District Court case. Dist. Ct. Constr. 11. For purposes of this Decision, we adopt the parties’ agreed construction. Pet. 6. The parties agreed the “driving component” term is a means-plus-function term. Dist. Ct. Constr. 11. The function is “drives the moveable component in each of two opposite directions.” Id. Corresponding structure includes “coils 420, 514, 626, 1202, 1204, 1302, 1304, 1412, 1414, 1510 (also shown in Figs. 16–17); electromagnets shown in Figs. 10–11; and equivalents thereof.” Id. As to “control component,” the District Court held that the term is not a means-plus-function term because the claim defines the term structurally by requiring a “microprocessor,” “control program,” and “switch.” Dist. Ct. Constr. 17–22. For purposes of this Decision, we agree with the District Court that means-plus-function treatment does not apply to the “control component” recitation because structure in claim 1 defines the component. Given the context provided by claim 1 as a whole, a person having ordinary skill in the art would have understood the “control component” as identifying a specific structure (requiring a microprocessor, control program, and switch as claim 1 recites). See Williamson v. Citrix Online, LLC, 792 F.3d 1339, 1348 (Fed. Cir. 2015) (holding that the means-plus-function inquiry depends on “whether the words of the claim are understood by persons of ordinary skill in the art to have a sufficiently definite meaning as the name for a structure”).” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “With respect to other claim terms, Petitioner establishes a reasonable likelihood that it would prevail with respect to at least one claim based on the ordinary and customary meaning of these terms. Thus, no other claim terms require express construction for purposes of this Decision. See, e.g., Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 11

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 8,093,767
• Samsung Bioepis Co. Ltd. v. Regeneron Pharmaceuticals, Inc.All claims unpatentable
  PTAB · Jun 14, 2024 · IPR2023-00442 · APJ John G New · IPR · Final written decision

  Claims 1, 3–11, 13, 14, 16–24, and 26 are unpatentable as obvious over Dixon because Dixon anticipates them.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for petitioner

    “We adopt the same reasoning here, and conclude that the evidence of record and the Specification of the ’681 patent support construing the preamble’s recitation of a “method for treating a patient with an angiogenic eye disorder” as meaning administering a compound, i.e., the recited VEGF antagonist, to a patient for the purpose of improving or providing a beneficial effect in their angiogenic eye disorder. We find that, as in Eli Lilly & Co. v. Teva Pharms. Int’l GmbH, although the claims “encompass a clinical result, they do not require such a result.” (emphasis added). 8 F.4th 1331, 1343 (Fed. Cir. 2021). We consequently reject Patent Owner’s proposed construction that the language of the preamble reciting a “method for treating an angiogenic eye disorder” requires not only an intent to treat, but, additionally, a high degree of efficacy on par with monthly Lucentis. See PO Resp. 9–10.” slip op. at 17

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We adopt Petitioner’s proposed construction of the claim terms “initial dose,” “secondary dose,” and “tertiary dose.” Petitioner proposes adoption of the definitions expressly set forth in the Specification of the ’681 patent, viz., that the initial dose is the dose “administered at the beginning of the treatment regimen,” and is followed by the secondary doses that are “administered after the initial dose,” and the tertiary doses are “administered after the secondary doses” and may be distinguished from the secondary doses “in terms of frequency of administration.” Ex. 1001, col. 3, ll. 36–44. Patent Owner does not expressly dispute Petitioner’s construction, other than to argue that, by 2011, a person of ordinary skill in the art would have understood “initial” and “secondary” doses to correspond to loading doses and “tertiary” doses to correspond to maintenance doses. PO Resp. 13 (citing Ex. 2056 ¶ 66; Ex. 2349, 6–11. Patent Owner contends that the purpose (and expected effect) of loading doses was to achieve visual acuity gains and retina drying, and the goal of less frequent maintenance doses was to maintain the efficacy achieved with loading doses. Id. at 14 (citing Ex. 2056 ¶ 66). As we have explained above, we do not find persuasive Patent Owner’s argument that the definition of these terms requires a high, or otherwise defined, degree of efficacy. As we stated in the -00881 and -01225 Decisions: Based on those express definitions in the Specification, we do not find cause to construe the terms differently. In particular, we do not find that the Specification requires the “tertiary doses” to maintain any efficacy gain achieved after the initial and secondary doses, or that the term suggests any specific level of efficacy. The Specification unequivocally states that “[t]he terms ‘initial dose,’ ‘secondary doses,’ and ‘tertiary doses,’ refer to the temporal sequence of administration of the VEGF antagonist.”” slip op. at 18

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownDecided for patent owner

    “If a claim limitation is directed to printed matter, the second step of the Praxair analysis is to determine whether the printed matter is functionally related to its “substrate.” Praxair, 890 F.3d at 1032. Printed matter that is functionally related to its substrate is given patentable weight. Id. (citing DiStefano, 808 F.3d at 850). However, “[w]here the printed matter is not functionally related to the substrate, the printed matter will not distinguish the invention from the prior art in terms of patentability.” Id. (quoting In re Ngai, 367 F.3d 1336, 1339 (Fed. Cir. 2004)). More specifically, printed matter is functionally related to its substrate when the language changes not mere thoughts or outcomes, but provides action steps that the method requires. See C R Bard Inc. v. AngioDynamics, Inc., 979 F.3d 1372, 1381 (Fed. Cir. 2020) (holding that the test for printed matter is whether it “merely informs people of the claimed information, or whether it instead interacts with the other elements of the claim to … cause a specific action in a claimed process.”); see also Bristol-Myers Squibb Co. v. Ben Venue Laboratories, Inc., 246 F.3d 1368, 1376 (Fed. Cir. 2001) (stating that language “is only a statement of purpose and intended result” where its “expression does not result in a manipulative difference in the steps of the claim”) (emphasis added).” slip op. at 21

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “A Person of Ordinary Skill in the Art Petitioner notes that the Petitioner in the ’00881 IPR proposed that a person of ordinary skill in the art would have: (1) knowledge regarding the diagnosis and treatment of angiogenic eye disorders, including the administration of therapies to treat said disorders; and (2) the ability to understand results and findings presented or published by others in the field. Pet. 17–18 (quoting -00881 IPR, Paper 94 at 9–10). Furthermore, it was asserted that such a person would typically have an advanced degree, such as an M.D. or Ph.D. (or equivalent, or less education but considerable professional experience in the medical, biotechnological, or pharmaceutical field), with practical academic or medical experience in (i) developing treatments for angiogenic eye disorders, including through the use of VEGF antagonists, or (ii) treating of same, including through the use of VEGF antagonists. Id. at 18 (citing -00881 IPR Paper 94 at 10). Patent Owner does not expressly contest this definition of a person of ordinary skill in the art in its Response. In the -01225 IPR, we adopted the same definition of a person of ordinary skill in the art for the challenged claims of the ’681 patent, concluding that that definition was consistent with the level of skill in the art. See -01225 IPR, Paper 96 at 52–53. Having previously adopted this definition of the level of skill in the art for the claims of the ’681 patent, we do so again in the present proceeding.” slip op. at 25

  Patent outcomesUS 10,130,681 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,130,681
• Mylan Pharmaceuticals Inc. v. Regeneron Pharmaceuticals, Inc.All claims unpatentable
  PTAB · Jan 9, 2024 · IPR2023-00566 · APJ John G New · IPR · Final written decision

  Claims 1–9, 34–39, 41–43, and 45 are unpatentable as anticipated by Dixon; the Board did not reach the other grounds.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “inter partes review are anticipated by Dixon and therefore unpatentable (Ground 1). Because we reach this conclusion, we do not reach Petitioner’s contentions that the claims are obvious on the basis of Ground 5. Nor does our analysis rely upon, or cite to, Exhibit 1058. We consequently dismiss as moot Patent Owner’s motion to exclude Exhibit 1058.” slip op. at 24

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “Owner and its experts proposed claim construction of “effectively treating” as meaning “noninferior,” “statistically noninferior,” or “comparable.” Pet. Reply 4. Petitioner asserts that Patent Owner, and its expert, Dr. Do, advance the proposed construction of “effectively treating, ” with no explanation for what that means, or how it comports with the challenged dependent claims that recite visual acuity limitations ranging from losing less than 15 letters to gaining more than 15 letters. Id. at 4–5.” slip op. at 32

  • ExcludeMotion to exclude, grantedMotion to exclude, deniedMixed

    “inter partes review are anticipated by Dixon and therefore unpatentable (Ground 1). Because we reach this conclusion, we do not reach Petitioner’s contentions that the claims are obvious on the basis of Ground 5. Nor does our analysis rely upon, or cite to, Exhibit 1058. We consequently dismiss as moot Patent Owner’s motion to exclude Exhibit 1058.” slip op. at 24

  Patent outcomesUS 10,888,601 unpatentable
  Claim construction§ 102 anticipationcites Phillips
  Patents in suitUS 10,888,601

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.