- Incyte Corporation v. Concert Pharmaceuticals, Inc.No claims unpatentablePTAB · May 11, 2022 · PGR2021-00006 · APJ Devon Zastrow Newman · PGR · Final written decision
The Board held claims 1–7 and 9–21 not shown unpatentable over either obviousness ground because Petitioner did not establish motivation to select Compound (I) from Silverman’s genus.
RulingsFinal written decision- Expert testimonyPetitioner expert discountedOther
“It is not necessary for an expert’s experience or expertise to precisely match the art at issue. SEB S.A. v. Montgomery Ward & Co., 594 F.3d 1360, 1373 (Fed. Cir. 2010). However, one offering expert testimony must at least have ordinary skill in the art to provide relevant and reliable testimony that is helpful to the factfinder. Kyocera Senco Indus. Tools, Inc. v. ITC, 22 F.4th 1369, 1376–77 (Fed. Cir. 2022). “The Board has broad discretion to assign weight to be accorded expert testimony.” Consolidated Trial Practice Guide 35 (available at https://www.uspto.gov/sites/default/files/documents/ tpgnov.pdf?MURL=). Dr. Patterson has a Ph.D. in Chemistry and over 30 years of experience in drug design, drug administration, evaluation of drug effectiveness, and participated in drug design for over 20 years. Ex. 1007 ¶¶ 4–10; Ex. 1008, 1–2. He is author or co-author on over eight peer-reviewed journal articles involving medicinal chemistry. Ex. 1007 ¶ 5. We find this level of skill to meet the qualifications for the level of skill in the art under the training and experience portion of the definition we have adopted for purposes of this opinion (see § II.B.), reproduced below: a Ph.D. in chemistry, pharmaceutical sciences, molecular biology, or a similar field, or an M.D. with similar background. A POSA would also have had at least several years of experience with drug design, drug development, clinical trials, or access to other individuals with that knowledge and experience. Likewise, a POSA would have had knowledge and experience in treating hair loss disorders, or access to a person with that knowledge and experience. We note that Dr. Patterson himself also proposes this definition. Id. ¶ 102. However, Dr. Patterson does not have “knowledge and experience in treating hair loss disorders” and did not opine that, in regards to his testimony, he had access to a person with that knowledge and experience, as is proposed in the definition. See generally, Ex. 1007. Accordingly, we find Dr. Patterson qualified to opine on the level of ordinary skill with regard to issues of drug design, evaluation of effectiveness, and drug administration, but we find he is not adequately qualified to opine on the level of ordinary skill with regard to issues of treating hair loss disorders.” slip op. at 7
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner proposes the same definition as Petitioner, but adds that the skilled artisan “would also have had experience in JAK inhibition, deuteration, and AA [alopecia areata] formulations, or access to a person with that knowledge and experience.” Resp. 15 (citing Ex. 2059 ¶ 14). Patent Owner’s expert Dr. Ko critiques Petitioner’s proposed definition as “incomplete, because it lacks any requirement for experience, or access to individuals with experience, in JAK inhibition, deuteration, and AA formulations.” Ex. 2059 ¶ 16. However, neither Dr. Ko nor Patent Owner explains what difference this additional direct experience would have provided to an artisan with the skill level proposed by Petitioner, particularly when Petitioner’s definition includes “experience in treating hair loss disorders,” and for which the record contains evidence that existing JAK inhibitors such as ruxolitinib had been identified as causing reversal of hair loss caused by AA. Ex. 1003, 1043. Accordingly, we adopt Petitioner’s proposed definition as consistent with the level of skill apparent in the cited prior art. In any event, as Patent Owner does not explain why its alternative definition would have any bearing on the outcome of the present case, and as we discern no appreciable difference in the parties’ definitions, we note our findings and conclusions would be the same regardless of which definition were adopted. We further note that the prior art itself demonstrates the level of skill in the art at the time of the invention. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (explaining that specific findings regarding ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown”) (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985)).” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“C. Claim Construction We construe claims using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. § 282(b). 37 C.F.R. § 42.100. Therefore, we construe the challenged claims under the framework set forth in Phillips v. AWH Corp., 415 F.3d 1303, 1312–19 (Fed. Cir. 2005) (en banc). Under this framework, claim terms are given their ordinary and customary meaning, as would have been understood by a person of ordinary skill in the art (“POSA”), at the time of the invention, in light of the language of the claims, the specification, and the prosecution history of record. Id. Only those terms that are in controversy need be construed and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Matal, 868 F.3d 1013, 1017 (Fed. Cir. 2017) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). We have considered Petitioner’s claim construction proposals (see Pet. 21–23), which are uncontested (see generally Resp., not addressing construction), and find that it is not necessary to expressly construe any claim term for purposes of rendering this Decision.” slip op. at 13
- Novelty / Anticipation (§102) › Prior-art status of a reference › Applicant-admitted prior artReference not prior artDecided for patent owner
“Section 102(b)(1) provides two exceptions to § 102(a)(1) for disclosures made within one year of the effective filing date. Specifically, 35 U.S.C. § 102(b)(1) provides that a disclosure made one year or less before the effective filing date of a claimed invention shall not be prior art under 35 U.S.C. § 102(a)(1) with respect to the claimed invention if: (A) the disclosure was made by the inventor or joint inventor or by another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor; or (B) the subject matter disclosed had, before such disclosure, been publicly disclosed by the inventor or a joint inventor or by another who obtained the subject matter disclosed directly or indirectly from the inventor or a joint inventor. 35 U.S.C. § 102(b)(1).” slip op. at 16
Patent outcomesUS 10,561,659 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,561,659 - Shenzhen Buxiang Network Technology Co., Ltd. v. Sun Pleasure Co. LimitedNo claims unpatentablePTAB · Apr 11, 2022 · IPR2021-00080 · APJ Patrick R Scanlon · IPR · Final written decision
Claims 1–9 were not shown unpatentable because Metzger lacked the claimed fluid passage, and Wu was not prior art based on the claims’ earlier reduction to practice.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Relying on the testimony of Mr. Kuchel, Petitioner submits that a person of ordinary skill in the art “would have either (i) a bachelor’s degree in mechanical engineering, or an equivalent field, or (ii) would have an associate degree in mechanical engineering, or an equivalent field, and two years of practical experience in inflatable product design.” Pet. 16 (citing Ex. 1002 ¶ 26). In the Decision on Institution, we adopted Petitioner’s proposed level of ordinary skill in the art, stating it was “consistent with the evidence of record, including the asserted prior art.” Dec. Inst. 9. In its Response, Patent Owner makes arguments that rely on Petitioner’s proposed level of ordinary skill in the art, but does not dispute Petitioner’s definition. See PO Resp. 35, 39–53 (citing Ex. 2014 ¶ 66). Based on our review of the complete record, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner proposes claim constructions for the terms “substantially below” and “substantially inwardly” recited in claims 1 and 6. Pet. 40–41. In the Decision on Institution, we determined that it was not necessary to construe the terms at that stage of the proceeding. Dec. Inst. 9–10 (citing Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017)). Patent Owner contends “the claim terms ‘substantially below’ and ‘substantially inwardly’ are sufficiently clear on their face to preclude any need for claim construction,” but proposes claim constructions that differ somewhat from Petitioner’s proposed constructions in the event the Board determines that these terms require claim construction. PO Resp. 13, 15–16. Patent Owner also proposes a claim construction for the term “upper tubular periphery” recited in claims 1 and 6 that Petitioner opposes. Id. at 17–19; Pet. Reply 7–10. Only terms that are in controversy need to be construed, and then only to the extent necessary to resolve the controversy. Nidec, 868 F.3d at 1017. Because the outcome of our decision does not depend on either parties’ construction of the terms “substantially below,” “substantially inwardly,” or “upper tubular periphery,” we need not construe these terms to resolve the issues in dispute in this proceeding.” slip op. at 11
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable
“We agree with Patent Owner that Metzger’s gaps define fluid passages located between adjacent side support beams 25 (i.e., “internal walls”) and are not formed in any of the side support beams. We are not directed to any written description in Metzger indicating that the gaps are formed in a side support beam.7 Instead, Figures 5 and 6 of Metzger depict the gaps as being defined between four distinct side support beams 25. Furthermore, as Patent Owner points out, Mr. Kuchel appears to agree that there are no passages formed through the side support beams 25 of Figures 5 and 6. Ex. 2003, 107:12–108:9, 108:17–108:21. For these reasons, we determine that Metzger’s gaps are not formed through an internal wall, as required by claim 1. In the Reply, Petitioner asserts that, even if Metzger discloses four discrete, spaced-apart beams or walls, “the gaps or slices between walls are apertures in a structure through which air can pass.” Pet. Reply 15 (emphasis added). This argument is not persuasive because claim 1 recites that the fluid passage is formed through the internal wall (which Petitioner asserts is met by Metzger’s side support beam 25), not just any structure. Petitioner’s general assertion that air passes through “a structure” fails to establish that the gaps are formed in a side support beam.” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable
“Specifically, Petitioner argues that one of ordinary skill in the art would have understood from Metzger “that an air passage would be necessary to bypass the side support beam 25 and inflate the upper tubular periphery for the air mattress to function as intended.” Id. (citing Ex. 1002 ¶ 200). According to Petitioner, because Metzger discloses only a single air inlet valve, an ordinarily skilled artisan would have understood that providing openings, or fluid passages, through the side support beam 25, in lieu of or in addition to the gaps between the side support beam 25, would have been a simple solution to adequately inflate the peripheral frame of the mattress defined by the side support beam(s) 25. Id. at 74–75 (citing Ex. 1002 ¶ 200). Petitioner thus presents two alternate theories for modifying Metzger: (1) providing fluid passages in at least one side support beam 25 in addition to the gaps, and (2) providing fluid passages in lieu of the gaps. In support of the first theory, Petitioner only argues that providing fluid passages in the side support beams, in addition to the gaps between the ends of the side support beams, would have allowed the peripheral frame to inflate more freely. Id. at 75 (citing Ex. 1002 ¶ 201). In its Response, Patent Owner contends that “Petitioner is just wrong.” PO Resp. 45 (citing Ex. 2001 ¶¶ 146–149). Dr. Letton testifies that pumps used to inflate air mattresses are low flow and low pressure and generally inflate an air mattress to a maximum pressure of around 1 psi. Ex. 2001 ¶ 147. Dr. Letton further testifies that, with Metzger’s design, the” slip op. at 28
Patent outcomesUS 7,353,555 not shown unpatentableClaim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 7,353,555
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.