- PTAB · Jan 14, 2026 · PGR2025-00059 · APJ Devon Zastrow Newman · PGR · Institution
The Board instituted post-grant review of claims 1–4 on all four asserted grounds, finding a sufficient preliminary showing of obviousness and lack of enablement.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“V. CONCLUSION Petitioner has, at this stage, established that it will more likely than not prevail in showing that at least one of the challenged claims is unpatentable. This determination is, however, based on a preliminary record and is not final on any issues of patentability. We will make a final determination on the patentability of the challenged claims, as necessary and applying the preponderance of the evidence standard, based on a fully developed record through trial. VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that, pursuant to 35 U.S.C. § 324(a) post grant review of claims 1–4 of the ’233 patent is hereby instituted on the grounds set forth in the Petition, commencing on the entry date of this Order, and pursuant to 35 U.S.C. § 324(d) and 37 C.F.R. § 42.4, notice is hereby given of the institution of a trial; and” slip op. at 40
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Patent Owner does not proffer a description of a POSA. See generally, Prelim. Resp. For the purposes of this decision, on the record at this time, we find that Petitioner’s definition appears consistent with the level of skill shown in the prior art references of record, and apply it herein. See Daiichi Sankyo Co. v. Apotex, Inc., 501 F.3d 1254, 1256 (Fed. Cir. 2007). We invite the parties to further address the definition of a POSA during trial should they find it necessary.” slip op. at 7
- Expert testimonyPetitioner expert discountedDecided for patent owner
“In addition, the opinion stated in the Pomper Declaration that “the term of ‘low molecular weight’ is well accepted in the chemical arts” and the declarant “recognize[s] that low molecular weight compounds would have a molecular weight of typically from about 50 Daltons to about 1,500 Daltons” is offered by a co-inventor. We, as factfinder, have discretion to weigh the credibility of expert witnesses and to give each item of evidence such weight as appropriate. See In re Am. Acad. of Sci. Tech Ctr., 367 F.3d 1359, 1368 (Fed. Cir. 2004) (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”). In this case, we find that the published references on metabolites do not support the opinion. In re Am. Acad. of Sci. Tech Ctr., 367 F.3d at 1368 (“[T]he Board is entitled to weigh the declarations and conclude that the lack of factual corroboration warrants discounting the opinions expressed in the declarations.”) US-121, of which Dr. Pomper is lead inventor, also uses the term “low molecular weight”—without further characterization of the term—and is uninformative as to the meaning of the term. See Ex. 1006, ¶ 12. In addition, Patent Owner’s definition does not appear to apply to all compounds claimed in US-121.5” slip op. at 11
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“limited to Patent Owner’s proposed “from about 50 Daltons to about 1,500 Daltons.” The cited evidence relied on in the Pomper Declaration to define “low molecular weight” as a term well accepted in the chemical arts relates to metabolomics and metabolites. See Ex. 1002, 169, (specifically, ¶ 17 of Dr. Pomper’s declaration). Patent Owner admits that Dr. Pomper’s testimony is about molecules that differ from the claimed imaging and radiotherapeutic agents targeting FAP-α, but argues that the testimony is still relevant for purposes of explanation. Prelim Resp. 21. While it may be relevant, the testimony is not persuasive in light of the Specification. We find the uncontested fact that several of the B moieties alone—without the A moiety or L linker—specifically identified in the ’233 patent fall outside of Patent Owner’s proposed definition persuasive, as we normally do not interpret claim terms in a way that excludes examples disclosed in the specification. See, e.g., Verizon Servs. Corp. v. Vonage Holdings Corp., 503 F.3d 1295, 1305 (Fed. Cir. 2007) (rejecting proposed claim interpretation that would exclude disclosed examples in the specification). The cases cited by Patent Owner supporting that a claim term may be construed to exclude embodiments where the prosecution history supports such construction are factually distinguishable from the instant case as they regard instances of specific prosecution history disclaimer, clear prosecution disavowal, or relate to a specific definition of the terms in the Specification for the term being construed. Here, “low molecular weight” is not defined in the Specification, but, as Petitioner argues (see Pet. 21–25) is characterized as “demonstrat[ing] faster pharmacokinetics and a higher specific signal within clinically convenient times after administration” and that it “can be synthesized in radiolabeled form more easily.” Ex.1001, 13:33–50, 14:56– 16:14, 17:9–20. We are persuaded by the testimony of Dr. Zeglis, Petitioner’s declarant, that compounds weighing over 1500 Da may share those same behaviors, along with certain identified B moieties disclosed as embodiments. See Ex. 1003 ¶ 83.” slip op. at 10
Claim construction§ 103 obviousness§ 112 disclosurecites KSR · GrahamPatents in suitUS 12,115,233 - Synaffix B.V. v. Hangzhou Dac Biotech Co., Ltd.Some claims unpatentablePTAB · Aug 26, 2025 · IPR2022-01531 · APJ Devon Zastrow Newman · IPR · Final written decision
Claims 1–17, 20, 21, 24, 26, and 29–31 are unpatentable; claims 25 and 32–34 were not shown unpatentable, and the motion to exclude was dismissed as moot.
RulingsFinal written decision- RemandOther
“review of claims 1–17, 20, 21, 24–26, and 29–34 of the ’682 patent. Paper 2 (“Pet.”), 1, 3. Patent Owner, Hangzhou DAC Biotech Co., Ltd., filed a Preliminary Response (Paper 9, “Prelim. Resp.”). We initially determined that the information presented in the Petition did not establish a reasonable likelihood that Petitioner would prevail with respect to at least one of the challenged claims, and did not institute inter partes review. Paper 17. Petitioner requested Director review of our decision denying institution (Paper 18 (“Request”)). The Director delegated review of the decision to a Delegated Rehearing Panel (“DRP”). Paper 19. Patent Owner was granted the option to file a response to Petitioner’s Request (Paper 22 (“Request Resp.”)). The Delegated Review Panel vacated our decision and remanded the case to this panel with a revised claim construction for claim 1. Paper 23 (“DRP Dec.”). On August 30, 2024, we instituted an inter partes review after remand from the Director. Paper 25 (“Inst. Dec.”). Patent Owner subsequently filed a Patent Owner Response (Paper 31, “Resp.”), Petitioner filed a Reply (Paper 36, “Reply”), Patent Owner filed a Sur-reply (Paper 44, “Sur-reply”), and Petitioner filed a Sur-sur-reply (Paper 48, “Sur-sur-reply”).” slip op. at 2
- PTAB / AIA Trials › Motions to amend / substitute claimsOther
“I. Patent Owner’s Motion to Exclude Evidence Patent Owner moves to exclude Exhibits 1089 and 1090. Paper 50. As we did not rely on either of Exhibits 1089 or 1090 in deciding this matter, Patent Owner’s motion is dismissed as moot.” slip op. at 96
- Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableMixed
“For these reasons, Patent Owner’s arguments and cited evidence also” slip op. at 31
- Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableNot shown unpatentableMixed
“function as R2, and the ethyl group may function as R4, which can be a linear alkyl having 1–6 carbon atoms. We note that claim 3 permits R5 and R6 to be absent. For these reasons, the arguments presented in the Petition demonstrate that claim 3 would have been obvious over Singh’s Compound 3 when modified in view of Harris.” slip op. at 73
Patent outcomesUS 10,131,682 mixed§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 10,131,682 - DBR Finance, Inc. v. Rugged Cross Hunting Blinds, LLCNo claims unpatentablePTAB · May 29, 2025 · IPR2024-00291 · APJ Cynthia L Murphy · IPR · Final written decision
The Board held claims 1–19 not unpatentable because Petitioner did not prove the proposed Whybrew–Strength combinations disclosed the claimed mesh panels with spaced holes.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“We question, therefore, whether someone having an education in textile engineering or physics, but no experience in the field of hunting blinds, would be consistent with the level of skill portrayed by the ’535 Patent. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). We note that Petitioner’s expert’s experience, education, and qualifications are rooted in textiles, fibers and physics, and sophisticated subjects related thereto. See Ex. 1007 ¶¶ 14–20. But his deposition revealed that he has little or no experience in the field of hunting blinds. See Ex. 2038, 8–14.5 5 The same might be said of Patent Owner’s expert. See Ex. 2031, ¶¶ 6–7; Ex. 1023, 16. However, our obviousness analysis leaned lightly, if at all, on her declarations and testimony.” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“1. Mesh Material In the Petition, Petitioner asks that “the term ‘mesh material’” be interpreted in accordance with “a plain and ordinary usage.” Pet. 25. Per Petitioner, the “plain and ordinary” meaning of the term “mesh material” is “a woven material of open texture with spaced holes therein.” Id. Per Petitioner, “[o]ther typical terms used to describe a mesh-like material” are “a screen material, or a netting material, which are believed to be synonyms.” Id. Patent Owner does not dispute that a mesh material would have an open texture with spaced holes therein. See PO Resp. 18. We find that Petitioner’s proposed construction aligns with the ’535 Patent’s specification. See Ex. 1001. The drawings in the ’535 Patent depict the mesh material 26 as having an array of uniformly spaced circular holes forming a net-like structure (see id., Fig. 1A, 1B, 4, 9) or an array of uniformly spaced rectangular openings (see id. Fig. 8) forming a screen-like structure. The embodiments of the mesh material 26 listed in the ’535 Patent (e.g., a mesh banner material, scrims, a network of fibers, etc.) are materials having net-like or screen-like structures. See id. at 6:47–7:28.6” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner
“Our construction aligns with the claim language; Petitioner’s proposed construction does not. See Ex. 1001, 10:4–19. The independent challenged claims set forth “one or more panels of mesh material” and then set forth “said one or more panels comprising: a first side with a camouflage pattern; and a second side with a dark color coating.” Id. at 10:4–11. The recited “said one or more panels” corresponds to the previously recited “one or more panels of mesh material,” not panels comprising a material that was only a “mesh” prior to printing/coating. See id. Also, the independent challenged claims set forth that “the one or more panels of the mesh material define an outer surface of the camouflage structure.” See id. at 10:18–19, 1:23–24 (emphasis added). And the panel(s) defining a hunting blind’s outer surface would include the dark color coating. Our construction aligns with the ’535 Patent’s specification; Petitioner’s proposed construction does not. See Ex. 1001. The ’535 Patent repeatedly describes the relevant panel material in the hunting blind (i.e., post printing/coating) as a mesh material. See id., Abst., 1:19–5:34, 6:47–7:28, 9:16–54, Figs. 1A, 1B, 9. The ’535 Patent expressly describes and depicts the mesh material 26 as including the camouflage pattern and the dark-color coating. See id. at 1:52–56, 3:24–25, 3:31–33, Figs. 1A, 1B. The ’535 Patent says that “panels” of this coated mesh material 26 “are used to form” a hunting blind. Id. at 3:22–26. The ’535 Patent says that “[m]esh material is presented for a hunting blind with a camouflage pattern printed on a first side and a second side with a color coating.” Id. at Abst. The ’535 Patent says that “mesh material of interwoven fabric is provided for a hunting blind including a camouflage pattern printed on a first side and a second side with a dark color coating.” Id. at 1:19–22; see also id. at 1:44–49. Our construction aligns with the ’535 Patent’s prosecution history; Petitioner’s proposed construction does not. See Ex. 1006. As mentioned above, throughout prosecution of the ’535 Patent, the same prior art material was mapped to the claimed panel(s) of mesh material. See Ex. 1006, 64–72, 122–106. The mapped-to prior art mesh material was described during prosecution as an “interwoven fabric” with “a pattern” printed on a first side and “a dark color coating” on a second side. Ex. 1006, 64; see also id. at 122. And the mapped-to prior art mesh material (i.e., which included not only the interwoven fabric but also the printed pattern and the dark color coating) had a “net-like structure” with an array of uniformly spaced “net holes” that are “not closed.” Ex. 2021, 4:1–5, see also id. at 2:58–3:6, 4:34–45, Figs. 1, 2a. Thus, we understand that claimed panel(s) of mesh material must have” slip op. at 17
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable
“However, Patent Owner does not bear the burden of proving Strength’s camouflage material 10 does not have holes. Rather, Petitioner bears the burden of proving that Strength’s camouflage material 10 does have holes. And Petitioner’s arguments that undermine Patent Owner’s position that Strength’s camouflage material 10 does not have holes, concurrently undermine Petitioner’s position that Strength’s camouflage material 10 does have holes. Per Petitioner, “Strength is silent on whether visible holes exist in the fabric” (Pet. Reply 8) and “the Strength reference doesn’t discuss anything about holes” (Tr. 14). Petitioner’s expert testified that it was his “understanding that Strength is silent” on “whether or not there are holes.” Ex. 2038, 44. Petitioner contends that Strength’s silence about the presence/ absence of holes hinders Patent Owner from proving that Strength’s camouflage material 10 does not have holes. See Pet. Reply 8. We agree. But this same silence likewise hinders Petitioner from proving that Strength’s camouflage material 10 does have holes.” slip op. at 35
Patent outcomesUS 11,399,535 not shown unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR · GrahamPatents in suitUS 11,399,535 - PTAB · Mar 24, 2025 · IPR2024-01235 · APJ Hubert C Lorin · IPR · Institution
The Board instituted IPR of claims 1–3, 6–11, and 14–16 on all proposed grounds after finding a reasonable likelihood of prevailing on the §103 ground over Mañosa and Patel.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“In an [inter partes review], the petitioner has the burden from the onset to show with particularity why the patent it challenges is unpatentable.” Harmonic Inc. v. Avid Tech., Inc., 815 F.3d 1356, 1363 (Fed. Cir. 2016), 815 F.3d at 1363 (citing 35 U.S.C. § 312(a)(3) (requiring inter partes review petitions to identify “with particularity . . . the evidence that supports the grounds for the challenge to each claim”)). This burden of persuasion never shifts to Patent Owner. See Dynamic Drinkware, LLC v. Nat’l Graphics, Inc., 800 F.3d 1375, 1378 (Fed. Cir. 2015) (discussing the burden of proof in inter partes review). slip op. at 8
- Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedPrinted publication not establishedMixed
“[T]here is no presumption in favor of institution or in favor of finding a reference to be a printed publication under § 42.108(c) or any other authority. . . . [T]he burden is on the petitioner to identify with particularity evidence sufficient to establish a reasonable likelihood that the reference was publicly accessible before the critical date of the challenged patent, and therefore that there is a reasonable likelihood that it qualifies as a printed publication.” slip op. at 20
- Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageDisclaimer not foundDecided for petitioner
“May” expresses a possibility. The Specification reflects this interpretation of “may” when it states that “[i]n one embodiment, the organic material is not lyotropic. Thus, the organic material may not be a phospholipid.” Ex. 1001, 8:27–28 (emphasis added). One of ordinary skill would understand from this that the organic material “may not be” a phospholipid if the organic material is not lyotropic. It follows that if the organic material is lyotropic, then the organic material may be a phospholipid. Reading the statement “[t]he organic material may not be . . . a phospholipid” (id. at 8:59–63) in light of the earlier stated possibility that the organic material may be a phospholipid if the organic material is lyotropic, one of ordinary skill in the art would interpret “may not be” as excluding phospholipids under some conditions, not under all conditions. Taking the Specification’s discussion about phospholipids as exemplifying the permissive nature of the word “may,” we are unpersuaded that in stating that “[t]he organic material may not be [PMMA], a polyvinylidene difluoride-containing polymer, such as [PVDF] or PVDF- TrFE-CTFE, or a phospholipid, such as [DHPE]’” (Ex. 1001, 8:59–63), the specification “contains a clear and unmistakable disavowal of the compounds PMMA, PVDF, PVDF-TrFE-CTFE, and DHPE” and “disclaims the listed compounds” from the “organic material” of the claims under all conditions, as Patent Owner argues. Prelim. Resp. 6–7. Moreover, the claims themselves limit the “organic material” only to the extent that it is “barocaloric cooling or heating agent” and can perform in the manner claimed. See Ex. 1001, claim 1, supra. As broadly worded, the claims do not exclude PMMA, PVDF, PVDF-TrFE-CTFE, and DHPE per se from the group of organic materials employed by the claimed method. Adopting Patent Owner’s construction would impermissibly import a limitation (i.e., not exclude PMMA, PVDF, PVDF-TrFE-CTFE, and DHPE) into the claims. For the reasons stated, at this stage of the proceeding, we agree with Petitioner’s broad construction of “organic material.” We do not adopt Patent Owner’s proposed construction whereby PMMA, PVDF, PVDF- TrFE-CTFE, and DHPE are excluded from the scope of the claim term “organic material.” The parties are invited to address this issue further during trial, if desired. slip op. at 11
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Petitioner shows that (a) Mañosa (i.e., inorganic compounds such as Ni-Mn-In, Gd5Si2Ge2, and La-Fe-Co-Si) and (b) Patel (i.e., PVDF-TrFE- CTFE) teach materials exhibiting inverse BCEs. Pet. 59 (citing, inter alia, Ex. 1007, pages 4–8; Ex. 1009, 1, 4–5; Ex. 1004 ¶ 108). In our view, at this stage, Petitioner sufficiently shows (via the five reasons listed supra) why it would have been obvious to one of ordinary skill in the art to substitute the barocaloric cooling or heating agent of Patel for that taught in Mañosa, thereby reaching the claimed method with a reasonable expectation of success. Cf. KSR Int’l Co. v. Teleflex Inc., 550 U.S. 398, 416 (U.S., 2007) (“The Court recognized that when a patent claims a structure already known in the prior art that is altered by the mere substitution of one element for another known in the field, the combination must do more than yield a predictable result.”)” slip op. at 32
Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,230,656 - PTAB · Mar 18, 2025 · IPR2024-01380 · APJ Richard H Marschall · IPR · Institution
The Board instituted inter partes review of claims 1–10 based on a reasonable likelihood that the Polinski and Piepho combination renders claims 1–8 obvious.
RulingsInstitution decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art relating to the ’568 patent would have had “a bachelor’s degree in mechanical engineering or a related field, and at least 2 years of experience with industrial equipment design and development.” Pet. 5 (citing Ex. 1002 ¶ 30). Petitioner also contends that one of ordinary skill “may also have a combination of more formal education and less work experience or a combination of less or different formal education and more work experience.” Id. We view Petitioner’s definition as consistent with the problems and solutions disclosed in the ’568 patent and prior art of record, and adopt it as our own for purposes of this Decision. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached
“standard set forth in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). Under that standard, we give the words of a claim their plain and ordinary meaning as would have been understood by one skilled in the art at the time of the invention and in the context of the entire patent disclosure. Id. at 1312–13. Only terms in controversy need be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner argues that “[n]o terms need construction because the claims read on the prior art identified below under any construction consistent with Phillips.” Pet. 14–15. Based on the record before us, we need not expressly construe any claim terms to resolve the issues presented at this stage of the proceeding.” slip op. at 7
- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“Based on the current record, Petitioner sufficiently establishes for the purposes of institution that one of ordinary skill in the art would have been motivated to combine Piepho and Polinski in the manner Petitioner proposes and further demonstrates that the combination discloses all of the limitations of claim 1. 3. Conclusion Based on the foregoing, Petitioner establishes a reasonable likelihood of proving that the combination of Piepho and Polinski renders claim 1 obvious. We have also reviewed Petitioner’s arguments addressing claims 2–8. See Pet. 31–40. Based on our review of the current record, Petitioner also establishes a reasonable likelihood of proving that claims 2–8 would have been obvious over Piepho and Polinski.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for petitioner
“and Piepho renders claim 1 obvious. For each limitation in claim 1, Petitioner points to specific portions of the references that support its position that the combination discloses the limitations in question. See Pet. 16–31. Petitioner also cites to declarant testimony addressing the limitations. Id. (citing Ex. 1002). In support of its combination of Polinski and Piepho, Petitioner argues that both references disclose “gyratory rock crusher[s],” “Piepho further teaches the interchangeability between a cylindrical joint and a tapered joint,” and one of ordinary skill in the art (a “POSITA”) would have been motivated to combine Piepho’s tapered joint with Polinski. Id. at 16–17 (citing Ex. 1002 ¶¶ 80–81; Ex. 1015, 1010; Ex. 1016, 3:24–35). According to Petitioner, “Piepho teaches the interchangeability between a cylindrical joint and a tapered joint” and “a POSITA would understand the advantages afforded by the use of a tapered joint as compared with a cylindrical joint,” including the fact that “tapered interference joints, while more expensive to manufacture, provide[] advantages in assembly, alignment, and fit-up.” Id. at 17 (citing Ex. 1002 ¶¶ 80–81).” slip op. at 11
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 9,827,568 - PTAB · Mar 18, 2025 · IPR2024-01381 · APJ Richard H Marschall · IPR · Institution
The Board instituted review of claims 1–14 based on a reasonable likelihood that the Polinski, Piepho, and Harless combination renders claim 1 obvious.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“We have jurisdiction under 35 U.S.C. § 314. Under § 314, an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the challenged claims in the petition.” 35 U.S.C. § 314(a). Because we determine that Petitioner demonstrates a reasonable likelihood that at least one challenged claim is unpatentable, we institute an inter partes review of all claims as challenged in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner argues that a person of ordinary skill in the art (“POSITA”) relating to the ’090 patent would have had “a bachelor’s degree in mechanical engineering or a related field, and at least 2 years of experience with industrial equipment design and development.” Pet. 3 (citing Ex. 1002 ¶ 29). Petitioner also contends that one of ordinary skill “may also have a combination of more formal education and less work experience or a combination of less/different formal education and more work experience.” Id. Patent Owner states that, for purposes of its Preliminary Response, it “does not object to Petitioner’s position on the level of ordinary skill in the art.” Prelim. Resp. 21 (citing Ex. 2001 ¶ 27). At this stage, and based on Petitioner’s undisputed contentions, we view Petitioner’s definition as consistent with the problems and solutions disclosed in the ’090 patent and prior art of record, and adopt it as our own for purposes of this Decision. See, e.g., GPAC, 57 F.3d at 1579 (approving the determination of the level of ordinary skill in the art by appeal to the references of record).” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Pursuant to 37 C.F.R. § 42.100(b), we apply the claim construction standard set forth in Phillips v. AWH Corp., 415 F.3d 1303 (Fed. Cir. 2005) (en banc). Under that standard, we give the words of a claim their plain and ordinary meaning as would have been understood by one skilled in the art at the time of the invention and in the context of the entire patent disclosure. Id. at 1312–13. Only terms in controversy need be construed, and only to the extent necessary to resolve the controversy. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner argues that “[n]o terms need construction because the claims read on the prior art identified below under any construction consistent with Phillips.” Pet. 10–11. Patent Owner “submits that the Board need not construe any claim terms as the claims are patentable under any reasonable construction.” Prelim. Resp. 20. Based on the record before us, we need not expressly construe any claim terms to resolve the issues presented at this stage of the proceeding.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Patent Owner does not contest Petitioner’s combination of Polinski and Piepho, but instead argues that no motivation to combine exists because Harless “would render both Polinski and Piepho inoperable for their intended purpose of preventing shaft failure.” Prelim. Resp. 22–31 (citing, inter alia, Ex. 2001 ¶¶ 48–59). When addressing intended purpose, Patent Owner argues that “Polinski mitigates shaft fatigue failure . . . specifically by omitting threads that are typically cut into gyratory shafts to attach a crusher mantle.” Id. at 23 (citing Ex. 1017, 1:61–67). Patent Owner asserts that Polinski instead teaches that shaft stress can be reduced “by cutting threads into a bearing sleeve.” Id. at 24 (citing Ex. 1017, 1:1–67). Piepho, according to Patent Owner, seeks a similar goal: “to prevent fretting wear and corresponding fatigue,” by “coating a portion of the shaft fit into a yoke bushing (which Petitioner alleges is a sleeve) with a ceramic coating.” Id. at 24 (citing Ex. 1007, 2:15–25; Ex. 2001 ¶¶ 42–43). Patent Owner argues that introducing Harless’s groove onto the main shaft would undermine the purposes of Piepho and Polinski because these would “introduce stress concentrations,” “lead to increased fretting wear,” and “increase the likelihood of fatigue failure.” Id. at 24–29. Patent Owner also argues that Petitioner’s approach relies on impermissible hindsight because one of ordinary skill would not seek to rely on Harless’s grooved shaft for use in “mounting of gears and similar components” rather than “for crushing applications, much less in a gyratory crusher, as claimed.” Id. at 30. According to Patent Owner, Harless fails to disclose “that its shaft is subjected to the same substantial stresses generated by the cyclic loading as the shafts disclosed by Polinski and Piepho.” Id. As to Petitioner’s argument that a POSITA would be motivated to make the combination to simplify the equipment and process for interference fits, Patent Owner contends that “Petitioner impermissibly picks and chooses aspects of the three references” and ignores what they teach to a POSITA, namely that “Polinski and Piepho are both directed to mitigating shaft fatigue” and adding Harless’s oil groove introduces several problems, as noted above. Id. at 31 (citing Ex. 2001 ¶¶ 48–59). Based on the current record, Petitioner sufficiently establishes for the purposes of institution that one of ordinary skill in the art would have been motivated to combine Piepho, Polinski, and Harless in the manner Petitioner proposes. Notably, Patent Owner does not directly contest Petitioner’s stated reasons why a POSITA would be motivated to make the proposed combination, i.e., that the combination would save money and simplify the equipment and process for making and breaking interference fits. See Pet. 19–21; Prelim. Resp. 22–31. Patent Owner instead suggests that Petitioner improperly ignores disadvantages when adding Harless’s groove to Polinski and Piepho, which at best suggests a weighing between the advantages Petitioner contends the addition of Harless’s groove provides and the alleged disadvantages. See Prelim. Resp. 22–31. While Patent Owner’s arguments may ultimately prevail, given the highly factual nature of the competing expert testimony and the weighing necessary to resolve this issue, we view the issues as best resolved after further development during trial and after Petitioner has the opportunity to respond to Patent Owner’s arguments and evidence. On this record and at this stage of the proceeding, Petitioner’s arguments and supportive declarant testimony adequately establishes a motivation to combine the references.” slip op. at 17
Claim construction§ 103 obviousnesscites PhillipsPatents in suitUS 11,014,090 - Encube Ethicals PTV. Ltd. v. Dermavant Sciences GmbHAdverse judgmentPTAB · Mar 7, 2025 · IPR2024-00834 · APJ Tawen Chang · IPR · Adverse judgment
The Board entered adverse judgment against Patent Owner on all challenged claims, 1–4, 6–10, 16, 18, 21, and 22, following their disclaimer.
RulingsAdverse judgment- Adverse judgmentAdverse judgmentGranted
“Terminate Proceeding and Parties’ Joint Motion for Entry of Adverse Judgment (collectively “Motion”). The parties jointly request that the Board enter adverse judgment in light of the disclaimer filed by Patent Owner disclaiming all challenged claims. Mot. 1 (citing 37 C.F.R. § 42.73(b)(2)). The Motion attaches as an exhibit a disclaimer under 37 C.F.R. § 1.321(a), filed January 28, 2025, of claims 1–4, 6–10, 16, 18, 21, and 22 of the ’088 patent, which constitute all of the claims challenged in the inter partes review. Ex. 2001; Paper 1, 3.” slip op. at 2
- PTAB / AIA Trials › Other PTAB motions (exclude, strike, seal, additional discovery, rehearing)Denied
“Accordingly, we grant the Parties’ Joint Motion for Entry of Adverse Judgment. This Adverse Judgment is sufficient to dispose of this proceeding and Patent Owner’s Motion to Terminate is denied as moot.1” slip op. at 3
NonePatents in suitUS 11,590,088 - Biofrontera Inc. / Biofrontera Bioscience GmbH et al. v. Sun Pharmaceutical Industries, Inc.InstitutedPTAB · Feb 24, 2025 · IPR2024-01312 · APJ Erica A Franklin · IPR · Institution
The Board instituted review of claims 1, 2, 4-6, 16, 17, and 19-21 on all asserted grounds, finding a reasonable likelihood of unpatentability over Lundahl and Larsen.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“justification for requiring a POSITA to have both an engineering degree and a medical degree. We agree, insofar as Petitioner has not clearly set out any particular explanation or evidence in support of its dual-degree requirement. In all other respects, we note that the parties’ proposed definitions are largely similar. Because we determine that Patent Owner’s proposed definition is reasonable and consistent with the ’028 patent and the cited art, we adopt Patent Owner’s definition for purposes of this Decision. In any event, our decision whether to institute does not turn on this level of skill determination.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“used to construe the claim in a civil action under 35 U.S.C. § 282(b); 37 C.F.R. § 100(b). Under that standard, claim terms “are generally given their ordinary and customary meaning” as understood by a person of ordinary skill in the art at the time of the invention. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc) (quoting Vitronics Corp. v. Conceptronic, Inc., 90 F.3d 1576, 1582 (Fed. Cir. 1996)). See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). Petitioner and Patent Owner assert that the Board need not construe any claims for the purpose of deciding whether to institute an inter partes review. Pet. 12; Prelim. Resp. 24. We agree.” slip op. at 10
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“Based on our review of the Petition, Petitioner explains that a driving motivation for a POSITA to modify Lundahl to include Larsen’s five panels is “to increase the flexibility of the device to ensure the light panels could be maintained at a distance of 2-4′′ from surface of the treatment area, whether the face, arm, or back, etc.” Pet. 29 (emphasis added). As Lundahl’s device is not flexible, and such flexibility would improve its ability to treat areas other than an average sized face, we determine, at this stage in the proceeding, that this motivation for the combination is sufficient.” slip op. at 20
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightInstituted
“would have been motivated to modify Lundahl’s device by incorporating Larsen’s use of LEDs on the surface of the light applicators in place of Lundahl’s fluorescent tubes with a reasonable expectation of success. Prelim. Resp. 55. Patent Owner argues that Petitioner’s modification is based on improper hindsight bias because “Petitioner cherry-picks Larsen’s LEDs (together with the five panels) and purports to arrange them according to the [sic] ‘the uneven spacing’ of Lundahl’s fluorescent tubes.” Id. at 56 (citing Pet. 46–49; Ex. 1015 ¶¶ 175–80). According to Patent Owner, “Petitioner cannot on the one hand argue that a ‘POSITA would have understood that Larsen’s applicator is configured to uniformly illuminate a treatment surface of the patient,’ while on the other ignore Larsen’s teaching that the ‘light sources 17 are placed in regular row arrangements.’” Id. Patent Owner asserts that Petitioner’s proposed modification “mish-mashes aspects of Lundahl and Larsen ([while] avoiding the overall teachings of [challenged] claims.” Id. at 56–57. As discussed above, based on our consideration of the current record, Petitioner has provided sufficient motivation for employing Larsen’s flexible five panel configuration. These panels in Larsen already use LEDs as their light source. So, in our view, Petitioner’s incorporation of the five panels includes the lighting source, i.e., LEDs, for those panels taught by Larsen. Further, we note that Petitioner has persuasively asserted that a skilled artisan would have been motivated to use Larsen’s LEDs as they are more cost-efficient and last longer. See Pet. 31.” slip op. at 20
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 11,697,028 - PTAB · Feb 6, 2025 · IPR2024-01212 · APJ Robert A Pollock · IPR · Institution
The Board instituted IPR of claims 1–27 on all petitioned grounds after finding a reasonable likelihood that claim 1 would be obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a). After considering the evidence and arguments presented in the Petition, we determine that Petitioner demonstrates a reasonable likelihood of prevailing in showing that at least one of the challenged claims of the ’664 patent is unpatentable. Accordingly, we institute an inter partes review as to all the challenged claims of the ’664 patent on all the grounds of unpatentability set forth in the Petition.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“According to Petitioner, the relevant technical field is “‘thermal ablation systems and methods,’ which includes ‘methods for performing Radio Frequency (RF) neurotomy.”’ Pet. 11 (citing Ex. 1003, 1:24–27). Relying on the testimony of Dr. Tucker, Petitioner contends that the ordinarily skilled artisan in this field would have had at least (i) a bachelor’s degree in biomedical engineering, or a related field, such as mechanical engineering, biomechanical engineering, or bioengineering, who also has at least 3 years of experience with thermal ablation system and methods; or (ii) an advanced degree in the same areas of academic study with at least 1 years of experience with thermal ablation systems and methods. Id. (citing Ex. 1034 ¶ 105) (paragraphing added). Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears consistent with the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355, (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that Petitioner’s open-ended language “at least” expands the ranges of education and experience indefinitely with no upper bound, thereby encompassing those of extraordinary skill. Therefore, we do not adopt this aspect of Petitioner’s formulation. B.” slip op. at 11
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner
“Claim Construction The Board interprets claim terms in an inter partes review using the same claim construction standard that is used to construe claims in a civil action in federal district court. See 37 C.F.R. § 42.100(b)). In construing claims, district courts give claims their ordinary and customary meaning, which is “the meaning that the term would have to a person of ordinary skill in the art in question at the time of the invention.” Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1034 ¶ 106 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). On the presents record, we agree with Petitioner that no term requires express construction. C.” slip op. at 12
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundInstituted
“through [1e]. Pet. 28–30. Petitioner further relies on “Racz as modified in view of Fitz and Lee,” with respect to elements [1e] through [1h]. See generally, id. at 30–47. Supported by the testimony of Dr. Tucker, Petitioner contends that one of ordinary skill in the art would have been motivated to combine the teachings of Racz, Fitz, and Lee with a reasonable expectation of success of arriving at the claimed invention. Id. at 1–6, 21–27; Ex. 1034 ¶¶ 132–149. In short, Petitioner contends that “[m]ost of the recited RF needle features—including an elongate cannula, a removable RF probe, a conductive tip, and a monopolar configuration—are conventional features disclosed in . . . Racz,” whereas Fitz discloses that a single-tip device, such as disclosed in Racz, “would produce limited ablation volumes and would have motivated a POSA to solve this problem by adding deployable filaments,” as recited in claim elements [1e] and [1f]. Id. at 4–5, 21–22. In addition to its reliance on the multiple electrode tips disclosed in Fitz, Petitioner contends that Lee would have “motivate[ed] a POSA to implement deployable filaments on the tip of Racz’s device using channels within the cannula,” and “also shows how the filaments can extend outwardly around the needle’s tip to advantageously expand and control the ablation volume.” Id. at 5–6. Accordingly, Petitioner contends, one of ordinary skill in the art “would have found it obvious to modify Racz’s device to include the well-known deployable filaments described in Fitz and Lee,” and would have implemented this combination as “a matter of routine engineering.” Id. at 6, 27.” slip op. at 20
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,925,664 - PTAB · Feb 6, 2025 · IPR2024-01211 · APJ John G New · IPR · Institution
The Board instituted IPR on claims 18–47 and 53–74 and all petition grounds, finding a reasonable likelihood that claims 18–25, 27, and 29–33 are obvious over Racz, Fitz, and Lee.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“§ 314. An inter partes review may not be instituted unless “the information presented in the petition … and any response … shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a). Further, a decision to institute may not do so on fewer than all of the claims challenged in the petition. SAS Inst., Inc. v. Iancu, 138 S. Ct. 1348, 1359–60 (2018); 37 C.F.R. § 42.108(a); see also PGS Geophysical AS v. Iancu, 891 F.3d 1354, 1360 (Fed. Cir. 2018) (interpreting the statute to require “a simple yesor-no institution choice respecting a petition, embracing all challenges included in the petition”).” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Absent evidence or argument to the contrary, we apply Petitioner’s proposed definition, as it appears to be consistent with the level of skill of the prior art and is supported by the presently unopposed testimony of Dr. Tucker. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the level of ordinary skill in the art may be reflected in the prior art itself). We note, however, that the open-ended language ‘at least’ expands the ranges of education and experience indefinitely with no upper bound, thereby also encompassing those of extraordinary skill as well. Therefore, we do not adopt this aspect of Petitioner’s formulation.” slip op. at 13
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“With respect to the challenged claims, Petitioner contends that no claim term requires express construction. Pet. 11 (citing Ex. 1033 ¶ 120 (Dr. Tucker’s testimony that “the terms in the Challenged Claims would be understood by a POSA to have their plain and ordinary meaning and do not require a special construction or definition”)). We agree with Petitioner that, on the record presently before us, no claim term requires express construction.” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundInstituted
“Petitioner argues that, in view of these teachings in Racz and Lee, a skilled artisan would have found implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38) to be a routine engineering task. Pet. 39 (citing Ex. 1033 ¶ 179). According to Petitioner, a person of ordinary skill in the arts would have recognized that it would be appropriate to implement Lee’s perimeter filaments (22/1622) without including Lee’s central filament. Id. Petitioner asserts that Lee discloses that any number and arrangement of filaments may be implemented to provide a desired ablation volume. Id. at 38 (citing Ex. 1010 ¶¶ 103, 105, 106). Additionally, Petitioner argues, because Racz’s tip (14/38) is already active, a skilled artisan would have recognized that Lee’s central filament would not be necessary. Id. (citing Ex. 1009, col. 3, ll. 60–63, col. 4, ll. 18–23; Ex. 1033 ¶ 179). Petitioner therefore argues that a person of ordinary skill in the art a person of ordinary skill in the art would have been motivated to implement Lee’s perimeter deployable filaments (22/1622) on the distal tip (14/38) of Racz’s cannula (10/33) for the purpose of expanding and controlling the energy coverage area of Racz’s device. Pet. 40. Specifically, Petitioner asserts that a skilled artisan would have been motivated to implement Lee’s perimeter filaments (22/1622) around Racz’s tip (14/38) to provide a desired ablation volume (e.g., in a full or partial “cone” shape) and omit Lee’s central filament. Pet. 38 (citing Ex. 1033 ¶¶ 179, 73–75, 79–83). Petitioner contends that, as both Lee and Fitz confirm, this would improve Racz’s device by providing an expanded and controlled energy coverage area. Id. (citing Ex. 1011 ¶¶ 9–10, Abstr.; Ex. 1010 ¶¶ 12, 84, 123–131; Ex. 1033 ¶ 179). Petitioner argues further that, in implementing Lee’s perimeter filaments (22/1622) on Racz’s distal tip (14/38), a person of ordinary skill in the art would have found it obvious to modify Racz’s tip (14/38) to include internal deflection surfaces (12/1612) (e.g., channels and ramps as disclosed in Lee) to guide the perimeter filaments (22/1622) outwardly around Racz’s tip (14/38). Pet. 41 (citing Ex. 1010 ¶¶ 16, 18, 92, 102, claims 8, 10; Ex. 1033 ¶ 180). Petitioner asserts that it would have been obvious to provide openings in Racz’s distal tip (14/38) (e.g., in communication the internal deflection surfaces as disclosed in Lee) such that Lee’s perimeter filaments (22/1622) can, when deployed, exit Racz’s distal tip (14/38). Id. (citing Ex. 1010 ¶ 92, 102; Ex. 1033 ¶ 180). Furthermore, argues Petitioner, and to preserve the functionality of Racz’s removable electrical probe (22/52) and active tip (14/38) (and consistent with Lee’s teachings) a skilled artisan would have arranged the perimeter filaments, channels, and ramps around the internal perimeter of Racz’s cannula (10/33). Pet. 41 (citing Ex. 1010 ¶¶ 91, 92, 98, 102; Ex. 1033 ¶ 181). Petitioner recapitulates that Racz’s probe (22/52) is configured to extend the full length of the cannula’s shaft (12/34) to supply RF energy to the tip (14/38) and measure tissue temperature. Pet. 42. According to Petitioner, by omitting Lee’s central filament and arranging the perimeter filaments, channels, and ramps around the inner perimeter of Racz’s cannula (10/33), a skilled artisan could have implemented Lee’s perimeter filaments (22/1622) without obstructing Racz’s cannula (10/33). Id. at 40. Petitioner contends that this modification would preserve the functionality of Racz’s electrical probe (22/52), which is needed to transmit RF energy. Id. (citing Ex. 1033 ¶ 181–182).” slip op. at 29
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 10,736,688
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.