• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Sep 2, 2026 · PGR2025-00021 · APJ Kimberly Mcgraw · PGR · Final written decision

  Claims 1, 3–7, and 12–20 are unpatentable: the Board found the asserted Kim, Kim–Yang, Lee, and Lee–Haller obviousness grounds proved, but not Lee–Park.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(e.g., an advanced degree may substitute for professional experience).” Pet. 21 (citing Ex. 1003 ¶¶ 36–37). Petitioner further contends that a “POSITA would also have been aware of and generally knowledgeable about 3D memory’s structure, its component parts, and how it operates.” Id. Patent Owner does not dispute Petitioner’s definition of a POSITA. PO Resp. 9. Based on our review of the complete record, we adopt Petitioner’s uncontested definition of a POSITA.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITAPlain and ordinary meaningDecided for petitioner

    “The plain language of claim element [1.A] recites “wherein the first material layer is disposed over a first portion of the second material layer;” and claim element [1.B] recites “a landing pad disposed over a second portion of the second material layer.” Thus, the plain language of the claim merely recites that the first material layer is disposed over a first potion of the second material layer and the landing pad is disposed over a second portion of the second material layer. The plain language does not define what constitutes the first or second portions of the second material layer or define the first or second portions of the material layer by what is disposed above the layers. We agree with Petitioner that the term “portion” has a straightforward plain and ordinary meaning: a “part” of a larger whole. Pet. 5 (citing Ex. 1077, 406 (defining “portion” as “a part of a whole”)). The ’838 patent itself repeatedly uses the term “portion” this way. Ex. 1001, 5:40–43 (discussing both “an upper portion” and “lower portion” of a “staircase”), 5:66–6:1 (referencing “a portion of a top surface of a layer”); see also 4:39– 40, 7:15–17, 8:20–33, 8:34–65, 11:60–64, 12:38–59. Thus, we understand that the first and second portions of the second material layer are portions of (i.e., a part of the whole) second material layer. Neither the claims nor the Specification define what can constitute a first portion or a second portion of a second material layer.” slip op. at 11

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Dr. Giapis, argues Petitioner’s proposed modification of Lee requires a POSITA to (1) start with an oxide-based insulating layer 22 as shown in Figure 5B of Lee, (2) introduce an oxidant gas into the adjacent openings, and (3) oxidize a surface that is already oxide-based to form a curved surface. PO Resp. 78–81. Patent Owner provides credible evidence supporting its argument that a POSITA would not have been motivated to make these changes to Lee, as they are technically infeasible. Id. at 79 (citing Ex. 2019 ¶¶ 191–208). Dr. Giapis credibly explains that in Park’s process, an oxygen gas would be used to oxidize the silicon nitride or polysilicon, but “introducing such an oxidant into the openings of Lee’s structure above will not promote further oxidation to the existing oxide the relevant region . . . so nothing remains to be oxidized.” Ex. 2019 ¶¶ 192–193. We credit Dr. Giapis testimony that “[i]t is not possible to further oxidize a solid oxide material with oxygen gas as in Park. That is why Park’s thermal oxidation process is performed on silicon nitride or polysilicon, which are not oxides to begin with but they can be oxidized to form silicon dioxide.” Id. ¶ 193 (citing Ex. 2028 (Plummer) at 345–350). According to Dr. Giapis, a POSITA would have understood this and not expected the combination of Lee and Park to achieve any change in shape or any rounding in Lee’s Figure 5B. Ex. 2019 ¶ 193.” slip op. at 60

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “Patent Owner, however, with persuasive supporting testimony from Dr. Giapis, argues Petitioner’s proposed modification of Lee requires a POSITA to (1) start with an oxide-based insulating layer 22 as shown in Figure 5B of Lee, (2) introduce an oxidant gas into the adjacent openings, and (3) oxidize a surface that is already oxide-based to form a curved surface. PO Resp. 78–81. Patent Owner provides credible evidence supporting its argument that a POSITA would not have been motivated to make these changes to Lee, as they are technically infeasible. Id. at 79 (citing Ex. 2019 ¶¶ 191–208). Dr. Giapis credibly explains that in Park’s process, an oxygen gas would be used to oxidize the silicon nitride or polysilicon, but “introducing such an oxidant into the openings of Lee’s structure above will not promote further oxidation to the existing oxide the relevant region . . . so nothing remains to be oxidized.” Ex. 2019 ¶¶ 192–193. We credit Dr. Giapis testimony that “[i]t is not possible to further oxidize a solid oxide material with oxygen gas as in Park. That is why Park’s thermal oxidation process is performed on silicon nitride or polysilicon, which are not oxides to begin with but they can be oxidized to form silicon dioxide.” Id. ¶ 193 (citing Ex. 2028 (Plummer) at 345–350). According to Dr. Giapis, a POSITA would have understood this and not expected the combination of Lee and Park to achieve any change in shape or any rounding in Lee’s Figure 5B. Ex. 2019 ¶ 193.” slip op. at 60

  Patent outcomesUS 12,010,838 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 12,010,838
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Manufacturing Resources International, Inc.All claims unpatentable
  PTAB · Sep 1, 2026 · IPR2023-00220 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–5, 7–13, and 16 are unpatentable as obvious over the asserted prior art; a separate ground was not reached because those claims were shown obvious on other grounds.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “had a bachelor’s degree in a pertinent discipline, such as mechanical engineering, physics, applied physics, product design, or a related field, and would also have had 2–4 years of experience working with electronic displays, including the thermal management, product design issues, and failure modes associated with such displays, or 5–7 years of experience in the field working with electronic displays and would have developed a similar understanding of thermal management, product design issues, and failure modes associated with electronic displays. Dec. 7–8. The parties’ positions have not changed from those we considered in the Institution Decision, and neither party argues that the outcome of this case would differ based on our adoption of a particular level of ordinary skill in the art. Thus, we apply the same definition in this Decision. Our determination regarding Petitioner’s challenge does not turn on the differences between Petitioner’s and Patent Owner’s proposed definitions, however, and we note that our conclusion would be the same under either definition.” slip op. at 8

  • ExcludeMotion to exclude, deniedDenied

    “new evidence filed by Patent Owner with its Sur-reply in contravention of 37 C.F.R. § 42.23(b). Paper 47, 1–5. We do not rely on either of these exhibits in rendering this Decision. Accordingly, we dismiss as moot Petitioner’s Motion to Strike.” slip op. at 73

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “that Patent Owner fails to adduce evidence showing how the claimed invention satisfied the alleged need for effective outdoor cooling. See Sjolund v. Musland, 847 F.2d 1573, 1582 (Fed. Cir. 1988) (holding that a proponent of objective evidence of long-felt need must show that “the claimed invention satisfied a long felt need”). Patent Owner states in conclusory fashion that “[d]espite the demand for outdoor displays, no one (including Samsung, despite having attempted to develop outdoor displays at least by 2005) was successful until Mr. Dunn conceived of his invention.” PO Resp. 75. Patent Owner cites no evidence for this proposition, so Patent Owner’s assertions regarding Mr. Dunn’s invention satisfying the alleged need are based on unsupported attorney argument. Accordingly, “we conclude that the nexus between the claimed invention and the purported long-felt, unmet need is too attenuated to provide a persuasive rationale for nonobviousness.” In re Karpf, 758 F. App’x 960, 965 (Fed. Cir. 2019).” slip op. at 64

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedDecided for petitioner

    “objective indicia of nonobviousness (i.e., secondary considerations) may lead to a conclusion that the challenged claims would not have been obvious. See, e.g., Stratoflex, Inc. v. Aeroquip Corp., 713 F.2d 1530, 1538–39 (Fed. Cir. 1983) (instructing that evidence of secondary considerations, when present, must always be considered in determining obviousness). Objective evidence of nonobviousness may include evidence of commercial success, licensing, copying, praise by others, long felt but unresolved need, and” slip op. at 58

  Patent outcomesUS 9,173,322 unpatentable
  § 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,173,322
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Manufacturing Resources International, Inc.All claims unpatentable
  PTAB · Aug 31, 2026 · IPR2023-00254 · APJ Jameson Lee · IPR · Final written decision

  Claims 1–3, 5–9, 11–13, 15–18, and 20 are unpatentable as obvious over Karppanen and over Yare.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “art. This determination of the level of ordinary skill in the art is consistent with what is reflected by the content of the applied prior art references. Cf. Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (the applied prior art may reflect an appropriate level of skill). Further, our obviousness conclusions would be no different even if Patent Owner’s articulation of the level of ordinary skill in the art is adopted. B.” slip op. at 15

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Accordingly, we do not discount Mr. Smith-Gillespie’s testimony” slip op. at 33

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “1. “closed loop” The term “closed loop” is recited in each independent claim. Petitioner asserts that in the Delaware action , the district court construed “closed loop” as “gas pathway within a display housing containing gas that is essentially isolated from external air.” Pet. 11 (citing Ex. 1026, 1). Petitioner asserts that the district court’s construction is the proper construction, in light of the specification and the prosecution history of the ’740 patent. Id. at 11–12. Petitioner explains: The ’740 patent refers to the gas/air, circulating through a closed loop as the circulating gas/air and also as the “isolated gas.” (Ex. 1001, 9:64–10:3, 10:7–9, 10:56–58, 11:30–12:6 (claims reciting circulating gas/air), 3:30–[39], 3:50–52 (specification referring to gas in the closed loop as “circulating gas” and “isolated gas”), FIG. 1.) Moreover, as noted above, the Applicant distinguished the claims from the Thielemans prior art based on the argument that the closed loop must be separate from and in addition to the open loop. (Ex. [1031], pp. 44-45, 160 (Responses filed on 01/07/2019 and 08/15/2019).) The Court’s “closed loop” construction should apply here, though Applicant notes that this claim construction does not affect the applicability of the prior art in this Petition because the art teaches the separate loops. Id. at 12. Petitioner’s characterization of the prosecution history with respect to the Thielemans reference is inaccurate. Our review of the cited portions of the prosecution history reveals that the Applicants did not argue to the Examiner that the closed loop and the open loop must be isolated from each other and cannot mix. Rather, the Applicants argued that Thielemans discloses having an open loop or a closed loop, not both an open loop and a closed loop. Ex. 1031, 44–45, 160. The Applicants also argued that Thielemans’s closed loop is not “about” and is not “encircling” the electronic image assembly. Id. at 160. The cited prosecution history does not support Petitioner’s assertion. Patent Owner explains that the ITC in the related investigation” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “whether there was an apparent reason to combine the known elements in the fashion claimed by the patent at issue.” KSR, 550 U.S. at 418 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). “[T]here must be some articulated reasoning with some rational underpinning to support the legal conclusion of obviousness.” Kahn, 441 F.3d at 988.” slip op. at 34

  Patent outcomesUS 10,506,740 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,506,740
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Manufacturing Resources International, Inc.All claims unpatentable
  PTAB · Aug 31, 2026 · IPR2023-00221 · APJ Jameson Lee · IPR · Final written decision

  Claims 1–15 are unpatentable as obvious over Karppanen and Larson; the Board found the evidence of obviousness outweighed the evidence of nonobviousness.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “art. This determination of the level of ordinary skill in the art is consistent with what is reflected by the content of the applied prior art references. Cf. Okajima v. Bourdeau, 261 F.3d 1350, 1354–55 (Fed. Cir. 2001) (the applied prior art may reflect an appropriate level of skill). Further, our obviousness conclusions would be no different even if Patent Owner’s articulation of the level of ordinary skill in the art is adopted. B.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “1. “closed loop” The term “closed loop” is recited in each independent claim.” slip op. at 16

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia no nexusDecided for petitioner

    “for outdoor displays, no one (including Samsung, despite having begun attempting to develop outdoor displays at least by 2005) was successful until Mr. Dunn and Mr. Hubbard conceived of their invention.” PO Resp. 65. Patent Owner cites no evidence for this proposition. Thus, Patent Owner’s assertions regarding Mr. Dunn’s and Mr. Hubbard’s invention satisfying the alleged need are based on unsupported attorney argument. Accordingly, “we conclude that the nexus between the claimed invention and the purported long-felt, unmet need is too attenuated to provide a persuasive rationale for nonobviousness.” In re Karpf, 758 F. App’x 960, 965 (Fed. Cir. 2019).” slip op. at 62

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableObjective indicia outweighedUnpatentable

    “and against obviousness, and weighed the evidence accordingly. The evidence of obviousness outweighs the evidence of nonobviousness. Petitioner has shown by a preponderance of the evidence that claim 1 would have been obvious over Karppanen and Larson.” slip op. at 74

  Patent outcomesUS 11,013,142 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,013,142
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Manufacturing Resources International, Inc.All claims unpatentable
  PTAB · Aug 31, 2026 · IPR2023-00199 · APJ John A Hudalla · IPR · Final written decision

  Claims 1, 4, 7, and 8 are unpatentable as obvious over Na and Kim (claim 1) and Na and Hong (claims 4, 7, and 8); other grounds were not reached.

  RulingsFinal written decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “Manufacturing Resources International, Inc. (“Patent Owner” or “MRI”) filed a Preliminary Response. Paper 7 (“Prelim. Resp.”). Taking into account the arguments presented by Patent Owner in the preliminary record, we determined that the information presented in the Petition established that there was a reasonable likelihood that Petitioner would prevail with respect to its unpatentability challenges. Pursuant to 35 U.S.C. § 314, we instituted this proceeding on June 20, 2023, as to all challenged claims and all grounds of unpatentability presented in the Petition. Paper 9 (“Dec. on Inst.”).” slip op. at 2

  • ExcludeMotion to exclude, deniedDenied

    “Petitioner’s Motion to Strike Petitioner moves to strike Exhibits 2055, 2056, and 2058–2061 as being improper new evidence filed by Patent Owner with its Sur-reply in contravention of 37 C.F.R. § 42.23(b). Exclude Mot. 1–5. We have not relied on any of these exhibits in rendering this Decision. Accordingly, we dismiss as moot Petitioner’s Motion to Strike.” slip op. at 73

  • Skill levelSkill level board ownDecided for patent owner

    “record, we adopted the following definition of the level of ordinary skill in our Decision on Institution: [A] POSITA would have had a bachelor’s degree in a pertinent discipline, such as mechanical engineering, physics, applied physics, product design, or a related field, and would also have had 2–4 years of experience working with electronic displays, including the thermal management, product design issues, and failure modes, associated with such displays, or 5–7 years of experience in the field working with electronic displays and would have developed a similar understanding of thermal management, product design issues, and failure modes, associated with electronic displays. Dec. on Inst. 11. The parties’ positions have not changed since the time of institution, and we discern no reason to change the definition. Thus, we apply the same definition. We are satisfied that this definition comports with the level of skill necessary to understand and implement the teachings of the ’595 patent and the asserted prior art. Notwithstanding, we note that our analysis would not change if we adopted either party’s proposed definition in toto.” slip op. at 12

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “appear nowhere outside of the claims in the ’595 patent. This fact alone tends to undermine Patent Owner’s suggestion that the “posterior surface” must be distinct from the “rear side.” In addition, Patent Owner’s cited portions of the Specification merely refer to the “posterior surface” as being the surface opposite that on which the LEDs are mounted to which heat from the LEDs is transferred. See Ex. 1001, 4:53–55, 4:57–60. They are inconclusive as to whether the “posterior surface” must be distinct from the “rear side.” Further, Mr. Gershowitz’s testimony in support of a “distinct” construction is based on his interpretation of the words “on the” in claim 4’s recited “posterior surface on the rear side of the PCB.” Ex. 2006 ¶ 128. Specifically, he testifies that “[i]f the posterior surface was the rear side of the PCB, the claim would have said so.” Id. He does not cite any support in the Specification of the ’595 patent for his interpretation. See id. Given that his testimony amounts to speculation divorced from the context of the Specification, Mr. Gershowitz’s testimony is entitled to little weight. We also have considered Mr. Smith-Gillespie’s testimony in support of Petitioner’s contention that an ordinarily skilled artisan “would have understood that the rear outermost surface of the PCB is the recited ‘posterior surface.’” Pet. Reply 20 (citing Pet. 83; Ex. 1002 ¶ 243). He cites a passage in the Specification of the ’595 patent that states: “The PCB may comprise a metal core PCB and the posterior surface of the PCB may be metallic so that air within the constricted convection channel may cool the metallic posterior surface (and subsequently the backlight assembly) more easily and efficiently.” Ex. 1002 ¶ 243 (emphasis omitted) (quoting Ex. 1001, 4:60–65). We accord Mr. Smith-Gillespie’s testimony more weight than Mr. Gershowitz’s testimony given that Mr. Smith-Gillespie’s testimony is rooted in disclosures about metal core PCBs in the ’595 patent. It also gives some credence to the notion that the “posterior surface” and the “rear side” could be one and the same. Based on the record before us, we do not agree with Patent Owner that” slip op. at 19

  Patent outcomesUS 8,854,595 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,854,595
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jul 20, 2026 · IPR2025-00228 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–18 are unpatentable: claims 1, 2, 4, 5, and 9–18 as obvious over Kim; claims 1–18 over Kim and Fang; claims 1–15 over Han and Fang; and claims 17–18 over Han, Fang, and Chen.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 26 (citing Ex. 1003 ¶42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does not dispute this assessment. PO Resp. 7–8. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’276 patent and the prior art of record.” slip op. at 6

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Dr. Campbell has a Ph.D. in physics, supplying the advanced degree that Petitioner’s definition of a person having ordinary skill in the art accepts as a replacement for some experience. Ex. 2006 ¶ 2. Dr. Campbell has significant experience in semiconductor technology, including in process technologies for submicron CMOS, years of research in semiconductor processing, materials, and device structures, and authored “[t]he leading textbook on semiconductor technology.” Id. ¶¶ 2–4. Dr. Campbell qualifies as a person of ordinary skill in the art under the parties’ agreed definition.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Patent Owner proposed that the terms “exposing portions” and “etching the exposed portions” require two different steps performed in that order. PO Resp. 7–10. Petitioner does not contest this characterization. Pet. Reply 1– 2. Patent Owner also proposes that this requires the exposure step not to perform any etching of the newly exposed layer. PO Resp. 10–12 (citing Ex. 1001, 10:2–5, 10:15–17 (stating that the etch-stop layer “protects the underlying structure until all the VIA openings 640 are formed” and that it “[t]he essence of an etch-stop layer dictates that contact-hole etching stops or slows down upon contact, i.e., exposing without penetrating it.” Pet. Reply 11. Based on the record before us, we determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “described in earlier embodiments would not be consistent with Kim’s statement that previously described elements are “omitted” in the Figures 17A to 22B section “for concise description.” As admitted by Patent Owner, it would be a “reasonable inference” that materials described in a first embodiment for a particular hypothetical layer L would also be used for that layer L in later embodiments absent an express statement to the contrary “because you have just omitted that sort of duplicative description.” Tr. 37:9–38:12. Kim’s Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4–15 embodiments. Thus, it would similarly be a “reasonable inference” that aspects of the stack structure would be understood to apply to the same stack in the embodiments of Figures 17A–22B, which rely upon, in unaltered form, the earlier-described elements of the stack. stack on bottom, they “replace” and “exclude” any prior description of a gate-stack-on-top. PO Resp. 18–19 (citing Ex. 2019 ¶¶ 40–41; Ex. 1005 ¶¶ 185–187 (describing the etch-stop layer as covering the sacrificial layers only at their end portions)). However, as admitted by Patent Owner, all of Kim’s Figures show only a gate-stack-on-bottom structure. Tr. 41:6–7 (“For the first embodiment, it is true that figures show the gate stack on bottom.”). The fact that Kim’s Figures 17A–22B, which add etch-stop and barrier layers to the gate stack, are shown only as gate stack on bottom is merely consistent with the uniform use of gate-stack-on-bottom in Kim’s Figures, which show the layer-by-layer construction of its device. Like Figures 4–15, Figures 17A–22B exemplify rather than limit the description of the previously described memory stack, and do not exclude the gate-stack-onbottom description of the memory stack. Kim can be used for all it realistically teaches, including descriptions in its disclosure that are not represented by specific Figures. See In re Chapman, 357 F.2d 418, 424 (C.C.P.A. 1966) (stating that a reference “is not limited to the disclosures in its specific illustrative examples.”). Accordingly, the record supports Petitioner’s assertion that Kim’s teaching of a gate-stack-on-top alternative for the memory stack would be understood by a POSITA as a memory stack option applicable to its other embodiments having that same memory stack.” slip op. at 11

  Patent outcomesUS 11,101,276 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,101,276
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00189 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claim 19 is unpatentable as obvious over Kim and over Nam; the challenge based on Lee and Park fails for lack of a reasonable expectation of success.

  RulingsFinal written decision

  • Adverse judgmentAdverse judgmentOther

    “B. Patent Owner’s Disclaimer of Claims 17 and 20 As indicated above, Patent Owner filed a statutory disclaimer of claims 17 and 20 of the ’666 patent. See Ex. 2005. In view of Patent Owner’s statutory disclaimer, we treat claims 17 and 20 as having never been part of the ’666 patent. See Vectra Fitness, Inc. v. TNWK Corp., ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because inter partes review cannot be instituted based on disclaimed claims, we do not consider claims 17 and 20 to be within the scope of this proceeding. 37 C.F.R. § 42.107(e) (“No inter partes review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017-00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claim 19, the challenged claim that has not been disclaimed.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) 3D memory devices, or an equivalent level of skill, knowledge and experience (e.g., an advanced degree may substitute for professional experience).” Pet. 24–25 (citing Ex. 1003 ¶¶ 34–37). Petitioner further contends that the “POSITA would also have been aware of and generally knowledgeable about 3D memory’s structure, its component parts, and how it operates.” Id. at 25 (citing Ex. 1003 ¶¶ 34–37).” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “evidence from the complete record now before us, we determine that the claim term “curved side surface” encompasses any outer surface of the structure with curvature. See Hamilton Beach Brands, Inc. v. F’real Foods, LLC, 908 F.3d 1328, 1338–1339 (Fed. Cir. 2018) (finding that it is acceptable for the Board to adopt its own claim construction where the parties “had notice of the contested claim construction and an opportunity to be heard”). We do not adopt Patent Owner’s position that “curved side surface” requires the side surface to be curved along a direction perpendicular to the top surface of the structure (e.g., the z-axis).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “curved side surface” are premised on its proposed claim construction which, as set forth above, we decline to adopt. Instead, we determined that “curved side surface” as used in the challenged claim encompasses any outer surface of the structure with curvature, which does not need to be curved in any specific direction. See § II.B.1, supra. Kim states: Embodiments of the inventive concepts in which the protrusion pad PAD_P has a rectangular parallel[] shape is illustrated, but the protrusion pad PAD_P is not limited thereto and, in some embodiments, may have a shape including a curved surface based on a virtual rectangular parallel[] shape, a cylindrical shape, or any shape. Ex. 1005, 8:29–34 (emphases added). Dr. Lee testifies that “[a] POSITA would have recognized that this includes configurations where the sides of the protrusion pads are curved, particularly to optimize electrical connectivity and mitigate stress at material interfaces.” Ex. 1003 ¶ 201. Dr. Lee further testifies that a POSITA would have understood Kim’s disclosure “teaches a variety of different protrusion pad PAD_P shapes” including “pads with curved sides when viewed in cross-section or pads with curved sides when viewed from above.” Id. ¶ 202. Accordingly, we determine that Kim discloses a cylindrically-shaped PAD_P that has a “curved side surface” as required by the challenged claim. slip op. at 24

  Patent outcomesUS 11,145,666 unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 11,145,666
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Jun 1, 2026 · IPR2025-00117 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–19 are unpatentable: claims 1–9, 11–16, 18, and 19 as obvious over Kim; claims 10 and 17 as obvious over Kim and Fang, Park, and Park and Fang.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a bachelor of science degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶ 42). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not dispute Petitioner’s definition. PO Resp. 7. We adopt Petitioner’s proposed 4 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 103; PO Resp. the ’711 patent and the prior art of record.” slip op. at 5

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “Based on the record before us, we agree with Petitioner that “on a surface” should be interpreted in line with the definition of “on” set forth in the ’711 patent. Ex. 1001, 4:1–6. We particularly note that the ’711 patent states that “‘on’ . . . should be interpreted in the broadest manner” and that “on” is not limited to “directly on.” Id. Instead, the ’711 patent states that “‘on’ also includes the meaning of ‘on’ something with an intermediate feature or layer therebetween.” Id. Patent Owner agrees that this definition controls the “standalone ‘on’” term such that A may be on B even if there is an intervening layer between them. Tr. 55:8–11 (“The standalone ‘on,’ we agree in the context of the patent, you can have intervening layers. I think the patent is clear about that.”). Claim 14 recites that the etch-stop layer is “on” something; i.e., “on a side surface and a top surface of each step.” Ex. 1001, 16:20–22. Patent Owner agrees that a surface is a “something.” Tr. 56:5–8 (“surface obviously is a something”). Substituting the “a “‘on’ something with an intermediate feature or layer therebetween” results in claim 14 reading as, “on a surface with an intermediate feature or layer therebetween.” Unlike “directly on,” which specifies the relation between two things, “a surface” may merely indicate the thing that something is “on,” particularly when “on” is “interpreted in the broadest manner” as expressly required by the ’711 patent.” slip op. at 7

  • Expert testimonyPatent owner expert discountedDecided for petitioner

    “Although Dr. Campbell testified in his deposition in response to Petitioner’s counsel that “on the surface” requires direct contact with the surface, his interpretation was based on “embodiments of” the patent rather than a general understanding of a person skilled in the art confronted with that term. Ex. 1027, 122:6–25, 124:6–23 (“I’m not sure if there are other sources for that, but it was on the ’711, so I’ve taken it there.”). Dr. Campbell, upon questioning from Patent Owner’s counsel, later stated that “an expert in semiconductor fabrication” would understand “on the surface” to mean “contact between one layer and another . . . with nothing in between.” Id. at 146:25–147:6. However, Dr. Campbell did not explain why such an interpretation is particular to the semiconductor fabrication art, or provide other explanation or support for this statement, which is in tension with the definition of “on” in the ’711 patent. Accordingly, we significantly discount the weight accorded to that statement. Phillips, 415 F.3d at 1318 (stating, “conclusory, unsupported assertions by experts as to the definition of a claim term are not useful to a court. Similarly, a court should discount any expert testimony ‘that is clearly at odds with the claim construction mandated by the claims themselves, the written description, and patent.’”). On balance, Dr. Campbell’s testimony is best understood as a description of certain Figures of the ’711 patent rather than a representation of an ordinarily skilled person’s understanding of the term “on the surface.” See Ex. 2009 ¶ 47 (describing Figs. 1, 3, and 4 as depicting layers in contact with the underlying layer or substrate). For example, Dr. Campbell describes Figure 9A as having a barrier layer “on and directly contacting the top and side surfaces of each step.” Id. ¶ 28 (emphasis added) (citing inter alia Ex. 1001, 7:6–67). Dr. Campbell does not explain why, beyond the fact that many Figures show layers as adjacent and in contact, a person of ordinary skill in the relevant art would understand those Figures to limit the claim language rather than illustrating particular embodiments that fall within a broader scope of claims 14 and 15. See Hill-Rom Servs., Inc. v. Stryker Corp., 755 F.3d 1367, 1371 (Fed. Cir. 2014) (“While we read claims in view of the specification, of which they are a part, we do not read limitations from the embodiments in the specifications into the claims.”).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “We agree with Petitioner that Kim’s first and second section are described as compatible, not mutually exclusive, embodiments. Kim’s second section builds further layers upon the structure of its first section, and states: In these embodiments, the same elements as in the embodiments previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B will be denoted by the same reference numbers therein, and for concise description, overlapping description of elements previously described with reference to FIGS. 5A through 14A and FIGS. 5B through 14B may be omitted. Ex. 1005 ¶ 184 (emphasis added). Patent Owner argues that only the embodiments in Figures 17A–22B describe an etch-stop layer and a barrier layer (as claimed), and that the language cited for a gate-stack-on-top configuration (e.g., Ex. 1005 ¶¶ 90, 91, and 240) is “conspicuously absent from the description of Figures 17A–22B.” PO Resp. 20 (citing Ex. 2009 ¶ 36). However, Figures 17A–22B do not further address the underlying staircase structure that was detailed in the descriptions of the Figures 4 through 15 embodiments. While Figures 17A–22B show a gate-stack-on-bottom configuration, this merely continues the gate-stack-on-bottom illustrations that were used in all of the previous Figures, even for those in which it is undisputed that a gate-stack-on-top configuration is a described alternative. The Figures exemplify rather than limit the description of the gate-stack-on-bottom view in Figures 4–15 and do not exclude the gate-stack on bottom description of the embodiments exemplified by those figures.” slip op. at 17

  Patent outcomesUS 10,672,711 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,672,711
• Dr. Squatch, LLC v. The Procter & Gamble CompanyAll claims unpatentable
  PTAB · Mar 25, 2026 · IPR2024-01498 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–19 are unpatentable as obvious over the Lesniak- and Native-based grounds; the Squatch and Sturgis ground fails because Squatch was not shown to be a printed publication.

  RulingsFinal written decision

  • BurdenDecided for patent owner

    “We agree with Patent Owner that Petitioner has not shown sufficiently that Squatch is a printed publication. As described above, Petitioner relies on Squatch as a “website excerpt” placed on its site at the relevant time, but has not produced a screen shot of the website to show that it ever existed. See Ex. 1059. Petitioner provides internal documents that purport to describe what would have been on Dr. Squatch’s website at the relevant time, but falls short of establishing what was on the website for the interested consumer to view. Thus, we determine that this ground fails.” slip op. at 55

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “or “POSITA”) at the time of the invention “would have (1) at least a B.S. or equivalent degree; and (2) at least two years of experience in cosmetics formulations.” Pet. 17 (citing Ex. 1002 ¶¶ 26–28). Patent Owner does not dispute Petitioner’s proposal about the POSA’s qualifications at this stage of the proceeding. PO Resp. 10. We adopt and apply Petitioner’s proposed definition of a POSA, which is consistent with the level of skill reflected in the asserted prior art. See e.g., Exs. 1003, 1004.” slip op. at 8

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner

    “compositions with the relevant ingredients and achieves stable compositions through the use of a second wax having a melting point of 73 to 90° C. Pet. Reply 6–7 (citing Ex. 1003, 1:39–54). For example, Lesniak’s compositions (nos. 8 and 11) that used such a secondary wax, namely CastorWax MP80, are disclosed as sufficiently stable. Ex. 1003, Table 2. Here, we further credit the testimony of Dr. Michniak-Kohn that Lesniak teaches how to make stable compositions by including a secondary wax, such as castor wax, with a sufficiently high melting point. Ex. 1003, 1:39-54, 5:23-32, Table 2. Both of the compositions (nos. 8 and 11) tested by Lesniak that had such a wax passed the stability tests. Id. Ex. 1086 ¶ 7; see also Pet. Reply 6 (“Lesniak overcame any stability issues, as it expressly discloses compositions that are ‘physically stable at high and low temperatures.’”) (citing Ex. 1003, 5:23–32). Having considered the parties’ positions and evidence of record, summarized above, we determine that Lesniak provides sufficient disclosure to enable a person of ordinary skill in the art to formulate deodorant stick within the parameters of claim 1.” slip op. at 25

  • Claim Construction › Intrinsic evidence (Phillips canons) › Preamble limiting or notPreamble limitingDecided for patent owner

    “Patent Owner asserts that the preamble of independent claims 1, 16, and 19 reciting “a deodorant stick” is limiting as it provides antecedent basis for the recitation of “said deodorant stick being free of an aluminum salt” for each independent claim. PO Resp. 7–10. Patent Owner also points to dependent claims 6–9 as relying on the preamble reciting “a deodorant stick” as antecedent basis for claim elements. Id. at 9. We agree. Petitioner does not argue to the contrary. See, e.g., Pet. 19 (arguing that Lesniak discloses a deodorant stick in the form of an antiperspirant stick).” slip op. at 8

  Patent outcomesUS 11,844,752 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,844,752
• Avation Medical, Inc. v. Emkinetics, Inc.All claims unpatentable
  PTAB · Mar 16, 2026 · IPR2024-01378 · APJ John G New · IPR · Final written decision

  Claims 1–10 are unpatentable as anticipated by Svihra or obvious over the asserted combinations; the cited non-patent references qualify as printed publications.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Legal Standards Anticipation A claim is unpatentable as anticipated under 35 U.S.C. § 102 only when “every element and limitation of the claim was previously described in a single prior art reference, either expressly or inherently, so as to place a person of ordinary skill in possession of the invention.” Sanofi-Synthelabo v. Apotex, Inc., 550 F.3d 1075, 1082 (Fed. Cir. 2008). However, a reference may inherently anticipate if a claim limitation that is not expressly disclosed “is necessarily present, or inherent, in the single anticipating reference.” Verizon Servs. Corp. v. Cox Fibernet Va., Inc., 602 F.3d 1325, 1337 (Fed. Cir. 2010). The “very essence of inherency is that one of ordinary skill in the art would recognize that a reference unavoidably teaches the property in question.” Agilent Technologies, Inc. v. Affymetrix, Inc., 567 F.3d 1366, 1383 (Fed. Cir. 2009).” slip op. at 8

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityPrinted publication establishedDecided for petitioner

    “(citing In re Klopfenstein, 380 F.3d 1345, 1350 (Fed. Cir. 2004)). Of particular relevance to the case presently before us is the VidStream court’s holding that “[w]hen there is an established publisher there is a presumption of public accessibility as of the publication date.” VidStream, 981 F.3d at 1065. Hulu addressed, inter alia, whether certain asserted references were shown to be publicly available and could be considered as prior art. IPR2018-01039, Paper 29 at 8. In Hulu, the Board held that, although testimonial evidence is one way to prove public accessibility, there are also various indicia of publication and other evidence that may be considered as a totality of the evidence to determine if an asserted reference was publicly accessible and prior art. Id. at 18. Facts to be considered in analyzing the issue, other than testimonial evidence, include, for example, whether there is an established publisher, a copyright date/notice, other publication-related dates (impression, printing, etc.), an ISBN number, citations to the reference before (and to a lesser degree, after) the priority date at issue corroborating its availability and/or that the publisher was established. Id. at 19–20 (see Valve Corp. v. Ironburg Inventions Ltd., 8 F.4th 1364, 1374 (Fed. Cir. 2021)). Here, we find the totality of evidence supports the conclusion that Petitioner has made a sufficient showing that Svihra and Amarenco (as well as the other identified non-patent references) were printed publications, and publicly accessible, prior to the ’477 patent’s priority date. We note at the outset that Patent Owner does not allege that any contested reference is fabricated, or a counterfeit document, but only that Petitioner has not set forth sufficient facts establishing that such references were published and available. Resp. 4. Svihra bears sufficient indicia of publication to conclude it was a printed publication and publicly accessible as of 2002. Ex. 1004. First, it appears on its face to be a legitimate scientific journal article; it indicates it was included at pages 480–83 in volume 103 (No. 12) of Bratisl Lek Listy, the Bratislava Medical Journal, which was established in 1921. The article identifies that it was received for publication on May 30, 2002, and accepted for publication on December 9, 2002; and multiple means of contact for the author and publisher are provided. Id. at 480, 483. Each of these indicia supports the contention that Svihra was published and publicly available in 2002. There is no direct evidence that Svihra was publicly accessed as of this date, but the article is cited as a reference in each of Exhibits 1085–1087, which further supports that Svihra was, generally, publicly available to interested individuals of ordinary skill in the art, which further corroborates that it was a published and publicly accessible publication. Having an established publisher also creates a presumption of publication for Svihra, which has not been rebutted by Patent Owner. VidStream, 981 F.3d at 1065.” slip op. at 22

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Petitioner also explains why a person of ordinary skill would have been motivated to combine the cited references, again citing specific disclosures from the references, and the supporting testimony of Dr. Wingeier. See Pet. at 27–28. Based on our review of Petitioner’s arguments and the evidence of record, we determine that Petitioner has established, by a preponderance of the evidence, that the cited references teach or suggest all of the limitations of challenged claim 1, and that Petitioner has established why a person of ordinary skill would have been motivated to combine the references, as proposed, with a reasonable expectation of success, for the reasons advocated by Petitioner with respect to Ground 2.” slip op. at 14

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “engineering, and at least two years of experience in the design and/or analysis of biomedical devices” and that “[a]dditional work experience could substitute for a formal degree and vice versa.” Pet. 14 (citing Ex. 1003 ¶ 21). Patent Owner does not dispute Petitioner’s proposal. See generally Resp. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the challenged patent and the level of skill in the prior art, we adopt Petitioner’s proposed definition and additionally use the term “skilled artisans” to refer to people with such skill at the time the invention was filed.” slip op. at 10

  Patent outcomesUS 9,002,477 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · Graham
  Patents in suitUS 9,002,477

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.