• Activision Blizzard, Inc. v. Milestone Entertainment, LLCSome claims unpatentable
  PTAB · Oct 13, 2026 · IPR2025-00710 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1–7, 9, 13, and 16–20 are unpatentable as obvious over Schneier and over Schneier with Okita; claim 8 was not shown unpatentable under either ground.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “On this record, Petitioner’s proposed level of ordinary skill in the art is not contradicted and is consistent with the technology and descriptions in the ’294 patent and the asserted prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner indicates that “[t]his Petition establishes that the prior art meets each of the claim limitations under any reasonable construction. Thus, no express construction is required.” Pet. 13 (citing Ex. 1003 ¶ 86). In its Response, Patent Owner indicates that no constructions are necessary “because under any reasonable construction of the claim terms, the prior art fails to disclose or suggest the claimed features.” PO Resp. 4–5. Because there is no dispute between the parties as to any particular claim term and because the claims, as a whole, are reasonably clear on their face, no specific claim construction is necessary in this proceeding.” slip op. at 8

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “rather than 10 credits, does not have a temporal component. Ex. 1008, 63:31–34. Rather, it describes an option for the user or player to obtain a discount at a particular point in time if the player is willing to purchase 20 rather than 10 credits. Id. Petitioner’s citations to this embodiment do not 9. Pet. 31; Pet. Reply 3–7 (citing Ex. 1008, 63:31–34). In this embodiment the $0.30 and $0.50 multipliers are constant, and the user is simply choosing between two existing options at a particular time to potentially take advantage of a $0.20 discount on credits. Comparatively, the $0.30 and $0.50 multipliers are different, but they are not “variable over time,” as required by claim 9. Ex. 1001, 47:38–40.” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “and reliance on Figure 19 do not in any way explain how updating game costs by meter 502 with a new Cost_Table is relevant to a credit multiplier or even a multiplier being varied over time. Ex. 1003 ¶ 155. Considering this evidence, we determine that Petitioner and Mr. Crevelt’s reliance mainly on snippets from Schneier’s “Updating Cost Information protocol” embodiment does not sufficiently explain why or how a person of ordinary skill in the art would have understood updating game cost to encompass varying a multiplier of credits over time. We also note that during his deposition, Mr. Crevelt was given opportunity to clarify his testimony as to Figure 19 and explain the cost updating embodiment in Schneier, and mostly demurred. See Ex. 2004:158:4–182:6. Explaining his reliance on Figure 19, Mr. Crevelt stated: A: And whatever latest price from that updated cost information coming from the central site is -- is variable, it’s variable as time proceed[s]. It’s a – it’s a, much of a complicated section, and -- but the information is in the Schneier patent and shows that it could have -- it should change over time. Id. at 158:23–159:5. Mr. Crevelt further stated that: A: . . . for a metered play where you’re buying so much time or so many credits or so many games on a specific game and when it runs out, then have you to buy more, and that variable can change over time. relates Schneier’s “updated cost,” with the claimed “multiplier” and “variable,” and does not adequately explain how they are equivalent or interconnected. See, e.g., id. at 160:16–23 (Mr. Crevelt testifying that “we can go from the description of figure 19, which starts at basically the top of column 56 in the Schneier patent, and . . . describes this process in detail of how the information is transferred from one place to the other and updated.”). Mr. Crevelt concludes that Schneier’s description is “complicated,” and from Figure 19 asserts the cost somehow includes a credit multiplier that “could” or “should” change over time. Id. at 158:23– 159:5. Overall, this testimony fails to sufficiently explain or point to persuasive evidence in Schneier as to how or why a person of ordinary skill in the art would have understood that the Figure 19 cost updating embodiment discloses a time-variable multiplier as required in claim 8.” slip op. at 20

  Patent outcomesUS 10,825,294 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,825,294
• Activision Blizzard, Inc. v. Milestone Entertainment, LLCSome claims unpatentable
  PTAB · Oct 13, 2026 · IPR2025-00709 · APJ Scott A Daniels · IPR · Final written decision

  Claims 1, 2, 4, 6, 8, 10, 14–18, 21–23, 25, 27, and 29 are unpatentable as obvious over Schneier and over Schneier with Okita; claim 9 was not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Patent Owner states it “does not dispute Petitioners’ proposed level of skill, and under any level of skill a POSITA would not understand the asserted Grounds to raise any unpatentability issue.” PO Resp. 4. Patent Owner states further that “this [Patent Owner Response] and supporting declarations apply Petitioner’s proposed level of skill.” Id. On this record, Petitioner’s proposed level of ordinary skill in the art is not contradicted and is consistent with the technology and descriptions in the ’635 patent and the asserted prior art references. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). For purposes of this Decision, we rely on Petitioner’s proposed level of ordinary skill in the art.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner indicated in the Petition that “[t]his Petition establishes that the prior art meets each of the claim limitations under any reasonable construction.[] Thus, no express construction is required.” Pet. 12–13 (citing Ex. 1003 ¶ 85). In its Response, Patent Owner indicates that no constructions are necessary “because under any reasonable construction of the claim terms, the prior art fails to disclose or suggest the claimed features.” PO Resp. 4–5. Because there is no dispute between the parties as to any particular claim term and because the claims, as a whole, are reasonably clear on their face, no specific claim construction is necessary in this proceeding.” slip op. at 8

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “We also note that during his deposition, Mr. Crevelt was given opportunity to clarify his testimony as to Figure 19 and explain the cost updating embodiment in Schneier, and mostly demurred. See Ex. 2004, 158:4–182:6. Explaining his reliance on Figure 19, Mr. Crevelt stated: A: And whatever latest price from that updated cost information coming from the central site is -- is variable, it’s variable as time proceed[s]. It’s a – it’s a, much of a complicated section, and -- but the information is in the Schneier patent and shows that it could have -- it should change over time. Id. at 158:23–159:5. Mr. Crevelt further stated that: A: . . . for a metered play where you’re buying so much time or so many credits or so many games on a specific game and when it runs out, then have you to buy more, and that variable can change over time. Id. at 161:2–6. These explanations are unpersuasive because the testimony relates Schneier’s “updated cost,” with the claimed “multiplier” and “variable,” and does not adequately explain how they are equivalent or interconnected. See, e.g., id. at 160:16–23 (Mr. Crevelt testifying that “we can go from the description of figure 19, which starts at basically the top of column 56 in the Schneier patent, and . . . describes this process in detail of how the information is transferred from one place to the other and updated.”). Mr. Crevelt concludes that Schneier’s description is “complicated,” and from Figure 19 asserts the cost somehow includes a credit multiplier that “could” or “should” change over time. Id. at 158:23– 159:5. Overall, this testimony fails to sufficiently explain or point to in the art would have understood that the Figure 19 cost updating embodiment discloses a time-variable multiplier as required in claim 9.” slip op. at 21

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableNot shown unpatentableMixed

    “Discount Credit Pricing Structure The $0.20 discount described by Schneier for purchasing 20 credits, rather than 10 credits, does not have a temporal component. Ex. 1008, 63:31–34. Rather, it describes an option for the user or player to obtain a discount at a particular point in time if the player is willing to purchase 20 rather than 10 credits. Id. Petitioner’s citations to this embodiment do not address the idea of a time component, i.e., “over time,” as required by claim 9. Pet. 31; Pet. Reply 3–7 (citing Ex. 1008, 63:31–34). In this embodiment the $0.30 and $0.50 multipliers are constant, and the user is simply choosing between two existing options at a particular time to potentially take advantage of a $0.20 discount on credits. Comparatively, the $0.30 and $0.50 multipliers are different, but they are not “variable over time,” as required by claim 9. Ex. 1001, 47:38–40.” slip op. at 18

  Patent outcomesUS 10,650,635 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,650,635
• Axon Enterprise, Inc. / Dedrone Holdings, Inc. et al. v. Airspace Defense, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00629 · APJ Scott C Moore · IPR · Final written decision

  Original claim 12 is not unpatentable; substitute claim 37 is added, while substitute claims 21–28 and 30–36 are denied as obvious.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “F.3d at 1279–80, we begin our analysis with the Specification of the ’711 Patent. The Specification indicates when a UAV (such as the recited “reference aerial vehicle”) navigates autonomously, it flies without manual control, and can, for example, track and fly to a target using information captured onboard the vehicle itself. See Ex. 1001, 3:24–28 (“[I]t may not be desirable to manually control the interceptor aerial vehicle to follow the target UAV. In some embodiments, the interceptor aerial vehicle is able to autonomously track and fly to the target UAV using machine vision based on images captured by a camera of the interceptor aerial vehicle.”). The Specification also indicates that “autonomous” means more than just “automatic flight,” and clarifies that autonomous navigation occurs when a UAV that previously received a target location from an external source subsequently turns and flies itself towards the received location. See, e.g., id. at 4:15–17 (disclosing that the detected location of a target may be provided to an interceptor “to allow it to automatically and autonomously fly toward the direction of the detected location”); 15:64–16:3 (automatic and autonomous navigation occurs when an interceptor’s navigation component and/or flight controller receive the location of a target, and adjust the interceptor “to turn and fly towards the received location . . . based on the received location”); 16:49–60 (“For example, a flight direction and/or speed of an interceptor aerial vehicle are automatically and autonomously adjusted based on a location and size of the target within the captured image. . . . This allows the flight path of the interceptor aerial vehicle to be dynamically adjusted to track and follow a moving target.”).” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable

    “have had reason to combine Beard and Laufer in the manner proposed by Petitioner, the combination would not satisfy the Autonomous Navigation limitation required by claim 12 because Laufer’s autopilot commands are generated by and transmitted from a remote command center (i.e., Laufer’s central controller 115). PO Resp. 15–16. In its Reply, Petitioner does not dispute that Laufer’s autopilot commands are generated by Laufer’s central controller 115, which is remote from the aircraft being controlled. See Reply 13–17. Petitioner asserts, however, that the combination still satisfies the Autonomous Navigation limitation because these autopilot commands are generated without human input. See id. Based on the complete trial record, Patent Owner’s arguments are persuasive. See PO Resp. 15–16; PO Sur-reply 42, 1–6; Ex. 2025 ¶¶ 84–87. The flight of Beard’s UAV 100 under the control of Laufer’s autopilot commands does not satisfy the Autonomous Navigation limitation of claim 12, as we have construed that limitation, because Laufer’s autopilot commands are generated at a location that is remote from UAV 100 (Laufer’s central controller 115.) See, e.g., Ex. 1010 ¶ 40 (“Central controller 115 uses autopilot command module 440 to generate autopilot aircraft commands”), ¶¶ 26, 30 (clarifying that central controller 115 and the controlled interceptor aircraft are separate devices that may communicate through a “wireless connection”), Fig. 4 (depicting “aircraft control commands 475” being generated externally from the depicted “Interceptor Aircraft”); see also Ex. 2025 ¶¶ 95–95. Petitioner never disputes that, in the proposed combination, Laufer’s central controller 115 would remain external to Beard’s UAV 100. See Reply 13–17. Instead, Petitioner relies on its proposed construction of the Autonomous Navigation limitation, which would have encompassed such an arrangement. See id. Our construction of the Autonomous Navigation limitation, which did not adopt Petitioner’s claim construction position, is dispositive of Petitioner’s argument. We thus determine that Petitioner has not shown by a preponderance of the evidence that claim 12 would have been obvious over Beard and Laufer.” slip op. at 15

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part

    “the legal requirements set forth in 35 U.S.C. § 316(d) and 37 C.F.R. § 42.121. Lectrosonics, Paper 15 at 4, 7–8. For the reasons that follow, we determine that Patent Owner has satisfied this burden. 1. Proposal of a Reasonable Number of Substitute Claims A motion to amend must “propose a reasonable number of substitute claims.” 35 U.S.C. § 316(d)(1)(B); see also 37 C.F.R. § 42.121(a)(3) (“A motion to amend may cancel a challenged claim or propose a reasonable number of substitute claims.”). “There is a rebuttable presumption that a reasonable number of substitute claims per challenged claim is one (1) substitute claim.” Lectrosonics, IPR2018-01129, Paper 15 at 4; see also 37 C.F.R. § 42.121(a)(3). Patent Owner has shown it proposes a reasonable number of substitute claims by proposing a single substitute claim for each of challenged claims 1–4, 8–11, and 13–20. MTA 1–2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 2. Amendments Respond to a Ground of Unpatentability “A motion to amend may be denied where … [t]he amendment does not respond to a ground of unpatentability involved in the trial.” 37 C.F.R. § 42.121(a)(2)(i). Patent Owner has responded to the grounds of unpatentability involved in this proceeding by amending the claims in response to the Petition’s asserted prior art. See MTA 2, 25, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 3. No Enlargement of the Scope of the Claims An amendment may not seek to enlarge the scope of the claims of the patent. 35 U.S.C. § 316(d)(3); 37 C.F.R. §§ 42.121(b)(1)–(b)(2). Patent Owner asserts that the amendments in the Motion do not enlarge the scope of the claims of the patent because each proposed substitute claim “retains all of the limitations of the corresponding challenged claim, and each proposed independent substitute claim adds further limitations.” See MTA 2, Claims App. Petitioner does not argue otherwise. See generally MTA Opp. We determine that Patent Owner meets this requirement. 4. No Introduction of New Matter An amendment may not introduce new matter. 35 U.S.C. § 316(d)(3);” slip op. at 22

  • 112 supportDecided for patent owner

    “Having considered the evidence and argument cited by both parties, we determine there is sufficient written description support for the disputed portions of limitations [37.e1], [37.e3,] and [37.e4]. The ’452 application discloses selecting between groups of processing schemes (e.g., algorithms) depending on a confidence level, where the groups are, for example: high cost, high robustness algorithms; medium cost, medium robustness algorithms; and low cost, low robustness algorithms. See Ex. 2019 ¶¶ 146–147. These schemes or algorithms may be neural networks. See, e.g., id. ¶ 50 (including neural network as a type of algorithm); see also id. ¶¶ 109–110); see generally MTA Opp 1 (not disputing that schemes may be neural networks). Specifically, the ’452 application describes “algorithms that process video frames of one or more video data streams,” and “produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Id. ¶ 141. The ’452 application also discloses the concept of switching between neural networks based on confidence levels. In particular, the ’452 application discloses that a “process cycles through the processing schemes to produce a detection of an object,” for example, where “if the confidence number is higher than an activation number, an action is performed to stop or change a running group (i) and select or switch to group (ii).” Id. ¶ 146. More particularly, “a processing scheme from the group of (i) High cost (low refresh rate), high robustness algorithm[s] can select a cheaper processing scheme from the group of (ii) Medium cost, medium robustness algorithms.” Id. The ’452 application additionally discloses that schemes or algorithms (e.g., neural networks) are applied to individual video frames, and that the confidence levels that determine which neural network will be applied in the future are also derived from individual video frames. For example, as discussed above, the ’452 application describes that “[t]he processing schemes produce a prediction of objects within the video f[r]ame, as well as a confidence number that is a measure of quality for that prediction.” Ex. 2019 ¶ 141 (emphases added). The ’452 application also describes selecting and applying an individual neural network, rather than only selecting and applying a group of processing schemes. For example, as highlighted above, the ’452 application describes that “a processing scheme from the” “High” group “can select a cheaper processing scheme from the” “Medium” group. Id. ¶ 146 (emphases added). In our view, these disclosures, read together, would reasonably convey to one skilled in the art that the inventor had possession of the disputed subject matter described above. See Ariad, 598 F.3d at 1351.” slip op. at 24

  Patent outcomesUS 10,514,711 mixed
  Claim construction§ 103 obviousness§ 112 disclosurecites Phillips · Graham · Nautilus
  Patents in suitUS 10,514,711
• Aroma360, LLC v. Air Esscentials, Inc.Some claims unpatentable
  PTAB · Oct 6, 2026 · IPR2025-00707 · APJ Eric C Jeschke · IPR · Final written decision

  Claim 5 is unpatentable over Gao-2 and over Gao-2 with Goubet; claims 1, 3, 4, and 6–8 were not shown unpatentable on any ground, and substitute claim 17 was denied.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “As noted in the Decision on Institution, Petitioner’s proposed definition appears generally consistent with the record, including the prior art. See Dec. Inst. 8 (citing In re GPAC Inc., 57 F.3d at 1579). We remove the phrase “at least” in both listed options, however, as that phrase adds ambiguity. Further, Patent Owner has not argued at trial that Petitioner’s proposal for the level of ordinary skill leads to an improper understanding of how a skilled artisan would have understood either the challenged patent or the prior art. In the analysis below, we continue to apply the level of ordinary skill in the art adopted in the Decision on Institution, as proposed by Petitioner.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither Petitioner nor Patent Owner propose explicit constructions for any claim terms. Pet. 16–17; PO Resp. 5–6. Based on the complete record, we need not construe explicitly any claim terms because doing so would not change the outcome of the analysis below. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedDecided for patent owner

    “As an initial matter, the record here does not support any sound basis to disregard the entirety of Dr. Micklow’s Declaration for allegedly not reviewing the parties’ claim constructions. See Pet. Reply 2–3 (citing Ex. 1046, 115:15–18). Contrary to Petitioner’s argument, in the cited 11 This refers to the recitation in clauses 1F and 5F that the “diffusion assembly is disposed between said upper chamber and said lower chamber.” discussion, Dr. Micklow does not indicate that he applied an incorrect understanding of a claim term. Cf. Cordis Corp. v. Bos. Sci. Corp., 658 F.3d 1347, 1357–58 (Fed. Cir. 2011) (disregarding testimony “based on an incorrect understanding of the claim construction”), cited at Pet. Reply 1; see also Pet. Reply 3 (arguing that “Dr. Micklow’s opinion that the prior art does not render the claims obvious is premised on an interpretation of certain claim limitations that are inconsistent with both parties’ constructions” (emphasis added)). Instead, we read Dr. Micklow’s testimony as clarifying that he was not involved in claim construction at all and that, as stated, he “made [his] opinions based on what [he] read in the patents.” Ex. 1046, 112:11–12; see also id. at 115:15–18 (“I don’t know if I would even apply claim construction. I applied engineering principles to a document that had been published with the patent office.”).” slip op. at 12

  • BurdenNot shown unpatentable

    “referring to the same direction as the separation of the “upper chamber” and “lower chamber” (vertically in both Figure 6 of the challenged patent and Figure 1 of Goubet), we turn back now to Petitioner’s discussion of clause 1F, which includes the limitation at issue. There, Petitioner does not discuss why the “diffusion assembly” is allegedly “disposed between” the “upper chamber” and “lower chamber,” but instead, Petitioner discusses why a component of the “diffusion assembly”—the “atomizer assembly”—is allegedly “disposed between” the “upper chamber” and “lower chamber”: Pet. 39. In the end, we need not assess whether the “atomizer assembly” identified by Petitioner is “disposed between” the “upper chamber” and “lower chamber” under the proper construction of that term (which, again, we need not and do not determine here) because the “disposed between” limitation does not involve the “atomizer assembly.” Instead, we find that, by failing to address why the identified “diffusion assembly” is “disposed between” the identified “upper chamber” and “lower chamber,” Petitioner has failed to provide persuasive evidence that Goubet discloses or suggests the “disposed between” limitation. Pet. 38–39 (discussing the claim language “said diffusion assembly is disposed between said upper chamber and said lower chamber” but only discussing the location of the “atomizer assembly”); see 35 U.S.C. § 316(e) (“In an inter partes review . . . , the petitioner shall have the burden of proving a proposition of unpatentability by a preponderance of the evidence.”). For the reasons above, we find, based on the complete record, that Petitioner has not shown by a preponderance of the evidence that Goubet discloses or suggests the “disposed between” limitation.” slip op. at 22

  Patent outcomesUS 10,092,918 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 10,092,918
• Trove Brands, LLC v. Camelbak Products, LLCSome claims unpatentable
  PTAB · Jun 2, 2026 · IPR2025-00140 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1–6 are unpatentable as obvious; claims 7–18 were not shown unpatentable because Ribarits does not disclose a mouthpiece disposed on the pivotal mount.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Trove contends that a person of ordinary skill in the art “would have had an undergraduate degree in mechanical engineering or equivalent coursework, and a year or more of experience in designing, prototyping, and/or manufacturing fluid containers or similar products” and that “[m]ore work experience may substitute for a lower level of education, and vice versa.” Pet. 15 (citing Ex. 1002 ¶ 25). While CamelBak offers “a similar, though slightly different level,” it nonetheless “discerns no material difference between the definitions provided by the parties for purposes of the Board’s decision in this proceeding.” PO Resp. 27. That being the case, we adopt Trove’s proposed definition of the level of skill in the art, as it is 2 JP 2002-211613A, published July 31, 2002 (Ex. 1004, “Nakajima”). 3 WO 2004/063042 A2, published July 29, 2004 (Ex. 1006, “Ribarits”). 4 US 4,485,963, issued Dec. 4, 1984 (Ex. 1007, “Panicci”). 5 US 6,523,711 B1, issued Feb. 25, 2003 (Ex. 1008, “Hughes”). reasonable and consistent with what is reflected in the asserted prior art and the specification of the ’250 patent. B. Claim Construction” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “We will not bite. CamelBak’s original assertion—that the plain and ordinary meaning of the constituent parts of “mouth” and “piece” is “a piece (or part) that goes in the mouth”—underscores the fallacy of CamelBak’s additional physical contact requirement. PO Resp. 28 (emphasis added). Indeed, in support of that earlier assertion, CamelBak pointed to the very dictionary definition that we relied on at institution in construing “mouthpiece” as a part that either “goes in the mouth or to which the mouth is applied.” See id. at 31 (citing Ex. 2005 (emphasis added)). Even the original testimony of CamelBak’s own expert confirms that one skilled in the art “would understand that the term ‘mouthpiece’ is commonly known in the art as a part designed for a user’s mouth,” without any requirement for physical contact with the mouth. Ex. 2016 ¶ 58 (citing Ex. 2005) (emphasis added)). And nothing in the Specification limits that common understanding. Although, indisputably, the Specification contemplates an embodiment where the user physically contacts the mouthpiece with their teeth (i.e., a bite-actuated mouthpiece), it also contemplates an embodiment where the user simply inserts the bottle in their mouth and commences fluid flow by squeezing it. See Ex. 1001, 10:9–13. That disclosure supports a meaning of “mouthpiece” that simply requires placement in the opening of the user’s mouth without necessarily incurring physical contact with some portion of the mouth, such as the teeth, tongue, or lips. Indeed, had CamelBak wished to premise the meaning of “mouthpiece” on some sort of physical contact with the mouth, it knew how to do so. For instance, the independent claims of CamelBak’s earlier ’255 patent, which is the subject of the related 1137 IPR, are limited in just such a manner, as they recite “wherein the resilient mouthpiece is adapted to resiliently compress responsive to compressive forces applied to the resilient mouthpiece by a user’s teeth.” Ex. 2023, at 20–25 (emphasis added). Thus, we reject CamelBak’s attempt to narrow our construction of “mouthpiece” to something other than “a part (as of an instrument) that goes in the mouth or to which the mouth is applied.” Neither the intrinsic nor extrinsic evidence supports the narrower construction proposed by CamelBak.” slip op. at 11

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In reply, Trove argues that CamelBak’s “novel” construction that the mouthpiece moves with rotational motion about that same axis of rotation defined by the two joint as the pivotal mount and in the same direction as the pivotal mount “are inconsistent with the claim language’s plain and ordinary meaning and find no support in the intrinsic and extrinsic record.” See Pet. Reply 16. But, because we find that, when properly construed, the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis” requires that the mouthpiece rotate about the same axis and in the same direction as the pivotal mount, we reject Trove’s argument as unavailing. And, although we agree with Trove that Nakajima’s mouthpiece engages in counter-clockwise rotation about a “Second Pivot Axis” when Nakajima’s lid 4 is opened (id. at 20–22), that rotation is about a different axis—one defined by Nakajima’s protrusions 24 rather than the claimed “pivotal axis” defined by Nakajima’s hinge shafts 19—and in a different manner—an upward and counterclockwise path rather than the claimed “pivotal movement with the pivotal mount” defined by Nakajima’s lid 4. Finally, in an alternative theory, Trove and its expert use “image- manipulation tools” in an attempt to show that Nakajima’s mouthpiece engages in some initial “clockwise-rotation” with Nakajima’s lid as it is opened. See Pet. Reply 18–24. We reject that theory as entirely conjectural and unsupported by the evidence.” slip op. at 39

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableNot shown unpatentable

    “We disagree. As discussed above, the proper construction of “for pivotal movement with the pivotal mount” requires that the mouthpiece mirror the rotational movement of the pivotal mount, i.e., rotate about the same axis as the pivotal mount and in the same direction as the pivotal mount. See supra § II.B.3. But Nakajima’s mouthpiece does neither, and, thus, does not exhibit the claimed “pivotal movement with the pivotal mount” about “two joints that define a pivotal axis for . . . the pivotal mount axis,” as properly construed.” slip op. at 36

  Patent outcomesUS 11,851,250 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 11,851,250
• Lululemon USA Inc. v. Nike, Inc.Some claims unpatentable
  PTAB · May 21, 2025 · IPR2024-00159 · APJ Carl M Defranco · IPR · Final written decision

  Claims 8, 9, 14, 15, and 19 are unpatentable over Minami; claims 1–3, 7, 16–18, and 20 were not shown unpatentable over Good or Munsing.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “lululemon contends, and Nike does not dispute, that a person skilled in the art in the relevant time frame would have had “at least a bachelor’s degree in mechanical engineering, textile engineering, or similar technical degree and at least 3 years of experience working with knitted textiles for use in fabric-based articles, including apparel such as footwear” and such person’s “additional experience compensates for any differences in that person’s education as stated above.” Pet. 13–14 (citing Ex.1003 ¶¶ 33–35); see also PO Resp. 14 (“For purposes of this proceeding, Nike applies lululemon’s proposed level of skill in the art.”). We find that lululemon’s proposed definition is consistent with the problems and solutions described in the ’046 patent and the prior art of record. Thus, we adopt the parties’ agreed-upon definition of the level of skill in the art.” slip op. at 6

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “We are not persuaded by lululemon’s attempt to equate the term “channel” in that passage with an open-periphery configuration. Nowhere does that passage indicate that the “channel” has an open-periphery. Instead, lululemon merely presumes, without support, that channels are open-periphery structures. More accurately, the terms “tunnel” and “channel” in the passage cited by lululemon are used synonymously. That is made clear by the overall context of the ’046 patent at issue, which is directed to how tubular rib structures 126 are formed by “first” and “second” curved portions 416 and 418 that are “knitted together” to define “hollow tube 112.” See Ex. 1001, 10:16–11:14, Figs. 4, 5 (emphasis added). In particular, the sentence cited by lululemon describes hollow tube 112 as being “disposed between” first and second curved portions 416 and 418, which Figures 4 and 5 of the ’046 patent clearly depict in a closed-periphery configuration. See id. at 10:66–11:3, Figs. 4, 5. Moreover, the very next sentence expressly describes that hollow tube 112 has “a generally cylindrical or elliptical shape” wherein “[t]he diameter of one hollow tube and the diameter of other hollow tubes may differ in some embodiments.” Id. at 11:3–14 (emphases added). We are not aware of any open-periphery channels being described as having a cylindrical or elliptical shape, nor are we aware of such a channel being described as having a diameter. Thus, lululemon’s proposed claim construction ignores the context surrounding the ’046 patent’s description of the tubular rib structures when it describes them as having the configuration of a tunnel or channel.” slip op. at 10

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We agree with Nike, given our construction of the claimed “tubular structures.” As shown in annotated Figures 1, 3, and 4 of Good (reproduced below), Good discloses a sock 12 having rib portions 22 (red) and webbed areas 24 (green). See PO Resp. 19. lululemon contends that Good’s rib portions 22 meet the claimed “tubular structures” because each rib portion 22 “roll[s] substantially together in the relaxed condition” and “has the shape of a tube, namely an elongate hollow structure.” Pet. 29–30. In support, lululemon points to Good’s Figure 3 (reproduced below center) as allegedly showing the tubular shape of Good’s rib portions 22. Id. at 30. Annotated Figure 3 is a vertical cross-section of rib portions 22 (red) shown in Good’s Figure 1. But, as Nike correctly notes, Good’s rib portions 22 are “C-shaped knitted portions,” which when stretched, go from an essentially C-shaped configuration (Figure 3) to a relatively flat, linear configuration (Figure 4). PO Resp. 19–20 (citing Ex. 2006 ¶¶ 48–49). Nowhere does Good disclose that the ends of C-shaped rib portions 22 ever meet and remain in a closed periphery configuration to form a hollow tube per our construction of “tubular structures” (as discussed above in Section II.B). In at least this way, Good’s C-shaped rib portions 22 differ from the claimed “tubular structures.”7 Thus, we find that Good does not disclose or otherwise suggest the claimed “tubular structures,” as properly construed, meaning that lululemon fails to demonstrate, by a preponderance of the evidence, that Good either anticipates claims 1–3, 7, 16–18, and 20, or, alternatively, renders obvious claim 3.” slip op. at 16

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “In our Institution Decision, we said that Munsing lacks the claimed “tubular structures” because “nowhere does Munsing indicate that the rows of stitches or loops form a rib that is tubular-like, let alone one with a closed periphery.” Inst. Dec. 10–12. During the trial phase, lululemon’s expert likewise agreed, conceding (on cross-examination) that Munsing only discloses non-tubular structures. See Ex. 2007, 40:9–41:11 (“Q [by Patent Owner’s counsel]: So you agree that . . . Munsing only discloses a nontubular rib? A [by lululemon’s expert]: That’s what I said.”). Nowhere does lululemon rebut that admission by its own expert, despite Nike noting it explicitly as a reason for rejecting Ground 2. Compare PO Resp. 25–26 (noting the admission of lululemon’s expert), with Pet. Reply 1–26 (addressing only Grounds 1 and 3, while omitting any mention of Ground 2, which is based on Munsing). Nor does lululemon ever dispute the preliminary findings in our Institution Decision as to why Munsing is not an anticipatory reference. Compare Inst. Dec. 10–12, with Pet. Reply 1–22. Thus, lululemon fails to demonstrate, by a preponderance of the evidence, that Munsing anticipates challenged claims 1–3, 7, 17, 18, and 20.” slip op. at 18

  Patent outcomesUS 9,375,046 mixed
  Claim construction§ 102 anticipation§ 103 obviousness
  Patents in suitUS 9,375,046
• Lululemon Athletica Canada Inc. / Lululemon USA Inc. v. Nike, Inc.Some claims unpatentable
  PTAB · May 13, 2024 · IPR2023-00189 · APJ Stephen E Belisle · IPR · Final written decision

  Claims 1–4, 7, 8, and 11–16 are unpatentable over Arrasvuori; claims 5, 6, 9, 10, and 17–20 are not unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “In determining the level of ordinary skill in the art, various factors may be considered, including the “type of problems encountered in the art; prior art solutions to those problems; rapidity with which innovations are made; sophistication of the technology; and educational level of active workers in the field.” In re GPAC Inc., 57 F.3d 1573, 1579 (Fed. Cir. 1995) (citation omitted). The level of ordinary skill in the art also is reflected by the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001). Neither party argues that the outcome of this case would differ based on our adoption of any particular definition of the level of ordinary skill in the art. Considering the subject matter of the ’256 patent, the background technical field, the prior art, and Petitioner’s unopposed definition of the skilled artisan, we apply the level of skill set forth above, which is consistent with the testimony of Dr. Lynch (Ex. 1003 ¶¶ 43, 44).” slip op. at 13

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther

    “simultaneously communicate in real-time to the first user at the first location and the second user at the second location, an interface indicating whether the challenge has been met.” Ex. 1001, 40:64–67 (emphasis added). The claim language itself suggests that “continuously generat[ing]” an interface in “real-time” allows the interface to indicate whether a challenge “has been met,” and doing so “in real-time” suggests that updates to the interface are generated as developments occur that may affect whether the challenge “has been met.” Notably, the subject claim limitation explicitly recites “continuously” generating the interface “in real-time”; it does not recite— but easily could have if intended—“periodically” generating the interface (i.e., at predetermined time intervals independent of the occurrence of developments that may affect whether the challenge has been met).3” slip op. at 29

  • Novelty / Anticipation (§102) › Prior-art status of a reference › Printed publication / public accessibilityReference is prior artDecided for petitioner

    “Petitioner contends Arrasvuori qualifies as prior art under 35 U.S.C. §§ 102(a) and 102(e) based on its filing and publication dates. Pet. 24. Patent Owner does not contest the prior art status of Arrasvuori. Also, on this record, we have no evidence of an invention date other than the earliest possible effective filing date of the challenged claims. Thus, for purposes of this Decision, we determine that Arrasvuori qualifies as prior art under 35 U.S.C. § 102(a) because Arrasvuori’s publication date of October 11, 2007, is before the earliest possible effective filing date of the challenged claims, which is March 3, 2008, and under § 102(e) because Arrasvuori’s filing date of March 29, 2006, is before the earliest possible effective filing date of the challenged claims (March 3, 2008). Ex. 1001, codes (22), (60), (63); Ex. 1005, code (22), (43).” slip op. at 18

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Arrasvuori discloses (a) “[m]onitoring” of “users performing real- world fitness tasks” (Ex. 1005 ¶ 38), using (b) “monitoring equipment . . . integrated into . . . wireless nodes and/or other computers of users, and/or [] attached to bodies of users” (id. at ¶ 39 (emphasis added)), where (c) “[u]sers might . . . wear their wireless nodes and/or other computers” (id. (emphasis added)), and where (d) “[t]he phrase[] ‘computer’ . . . refer[s] but [is] not limited to . . . a computerized watch” (id. at ¶ 90 (emphasis added); see id. at ¶ 40 (disclosing that “employed monitoring equipment might include one or more sensors”)). We find that these descriptions in Arrasvuori provide an anticipatory disclosure, particularly to the skilled artisan, of the limitation “wirelessly-connected sensor worn on an appendage of a first user.” See Ex. 1017 ¶ 45; Ex. 2006, 84:10-85:22. Although Arrasvuori does not recite in a single sentence the substance of disclosures (a) through (d) above, such as explicitly stating that its “wireless node is a computerized watch,” this is not necessary for the skilled artisan to understand that Arrasvuori discloses such a feature. See In re Bond, 910 F.2d at 832–33 (anticipation “is not an ‘ipsissimis verbis’ test”). Moreover, as argued by Petitioner, Arrasvuori’s disclosure of sensors “attached to bodies of users” and of users “wear[ing]” sensors itself discloses the subject limitation as broadly recited, even without considering the additional disclosure of a computerized watch. See Pet. Reply 17 (“Arrasvuori teaches wrist-worn sensors by stating that its users can ‘wear their wireless nodes and/or other computers.’” (citing Ex. 1005 ¶39)).” slip op. at 21

  Patent outcomesUS 9,278,256 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,278,256
• Whitewater West Industries, Ltd. v. American Wave Machines, Inc.Some claims unpatentable
  PTAB · Nov 20, 2023 · IPR2022-01033 · APJ Carl M Defranco · IPR · Final written decision

  Claims 1, 2, 7, 9–11, and 16–18 are unpatentable as obvious over McFarland and Chutter; claims 3–6, 8, and 12–15 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “pools would have “knowledge and familiarity with: (i) design of mechanical structures and (ii) fluid characteristics and the interaction of fluid forces upon mechanical structures,” and that this knowledge “could be obtained by: (i) successfully completing a Master’s degree in Mechanical Engineering or (ii) at least 5 years of experience in a job working with control systems, including designing or implementing such wave generation machines.” Pet. 15–16 (citing Ex. 1009 ¶¶ 36–37). AWM does not contest that assertion. See PO Resp. 2 (“it will be assumed that a PHOSITA has a background and the level of skill described in Petitioner’s definition”). We see no reason to deviate from WhiteWater’s proffered level of skill in the art. Thus, we adopt WhiteWater’s definition of the level of skill in the art.” slip op. at 8

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We need not expressly construe the disputed “controller” limitation because, as discussed below, WhiteWater prevails in its challenge of claims 1, 11, and 16, even assuming AWM’s proposed construction is correct. 2. “the delay . . . is a fraction of the chamber period” AWM construes this claim limitation to mean that the delay is “a portion of the whole chamber period,” in other words, a time period “less than the whole chamber period.” PO Resp. 6–7. WhiteWater, in turn, contends that the term “fraction” is not limited to “something ‘less than a whole’” and can be represented simply as a “quotient of two numbers.” Pet. Reply 5. We need not expressly construe term “fraction” as used in this claim limitation because, as discussed below, WhiteWater fails in its challenge of claims 3, 8, and 12, even assuming its proposed construction is correct.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “chamber 11 includes “operating device 30” and “flow control devices 17, 19.” Ex. 1005, 3:11-16, 3:43–45. According to Chutter, each chamber 11 “has similar mechanisms and the bank of chambers can be operated in any desired rhythm or sequence by a controller 40 coupled to each of operating devices 30 so that the pool can be provided with recreational waves of any desired pattern.” Id. at 4:3–13 (emphasis added). The pattern of waves “may be varied, as is well known, according to the sequencing at which pressurized air is delivered to the plurality of chambers.” Id. at 2:55–58 (emphasis added). Notably, Chutter teaches that central controller 40 is “arranged to control the rhythm or pattern of the several operating means so that, for example, all operating means” are actuated either “simultaneously” to create an “essentially linear” wave effect, or “sequentially” to create a “curved” or “non-orthogonal” wave effect. Id. at 2:12–39 (emphasis added); see also id. at 2:58–59 (“Adjacent chambers may be air pressurized alternately or simultaneously.”). Consistent with that disclosure, Chutter depicts controller 40 with multiple “connection” arrows to also indicate that a single, common controller controls the valve structure8 in multiple of Chutter’s wave-generating chambers 11. See id. at Fig. 1. Based on Chutter’s disclosures as a whole, we find that Chutter’s central controller 40 exemplifies a well-known and conventional controller 8 During the oral hearing, AWM’s counsel conceded that the term “valve structure,” as used in the claims, means not only “a set of valves,” but also “additional structure,” such as the means “to operate those valves” or “the actuator for the valves.” Hrg. Tr. 33:1–17. As such, we view Chutter’s operating means 30 and flow control devices 17 and 19 as corresponding to the claimed “valve structure.” capable of being connected to the valve structure in each of a series of wavegenerating chambers so as to actuate the valve structures in a sequential and delayed fashion to create a surf-simulating wave in a pool. See Ex. 1009 ¶ 162; Ex. 1016 ¶¶ 129–130. With that in mind, we further find that one skilled in the art would have looked to Chutter to reprogram or modify McFarland’s controller to operate in the same manner as Chutter’s controller so that McFarland’s controller was also capable of actuating the wave-generating chambers in a sequential and delayed fashion, as required by independent claims 1, 11, and 16. See Ex. 1009 ¶¶ 163–164; Ex. 1016 ¶¶ 131–133. Indeed, both McFarland and Chutter seek to create desirable surf waves and have similar wave-generating structures, such as a bank of chambers at one end of a pool and a controller for actuating a valve structure in each chamber to release water from the chamber into the pool. See Ex. 1009 ¶ 163; Ex. 1016 ¶ 131.” slip op. at 14

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable

    “As discussed above, WhiteWater persuasively shows that the combination of McFarland and Chutter teaches or suggests the disputed “controller” limitations of independent claims 1, 11, and 16, in particular, limitations 1.C, 1.D, 1.D.1, 11.C, 11.D, 11.D.1, 16.C, and 16.D.1. AWM does not otherwise dispute WhiteWater’s showing of how the asserted combination teaches the remaining limitations of the independent claims. See PO Resp. 44, 49, 53, 62 (identifying claim elements 1.C, 1.D, 1.D.1, 11.C, 11.D, 11.D.1, 16.C, and 16.D.1 as being absent from the asserted combination). Nor does AWM dispute WhiteWater’s showing that the asserted combination teaches the limitations of dependent claims 2, 7, 9, 10, 17, and 18, contending only that they are “distinguishable over McFarland and Chutter for at least the same reasons previously explained” with respect to claims 1, 11, and 16. Based on our review, we find that the record fully supports WhiteWater’s showing that the asserted combination teaches or suggests all the limitations of claims 1, 11, and 16, as well as the limitations of dependent claims 2, 7, 9, 10, 17, and 18. See Pet. 58–63. In sum, after weighing all relevant factual findings, including the level of ordinary skill in the art, the scope and content of McFarland and Chutter, and any differences between their combined teachings and the claimed invention,9 we conclude that WhiteWater demonstrates, by a preponderance of the evidence, that claims 1, 2, 7, 9–11, and 16–18 of the ’966 patent are unpatentable as obvious over McFarland and Chutter. Having determined those claims to be unpatentable, we do not address whether they are also unpatentable under WhiteWater’s alternative theories based on McFarland alone and Chutter alone. See SAS Inst. Inc. v. Iancu, 138 S. Ct. 1348, 1359 (2018) (holding that petitioner “is entitled to a final written decision addressing all of the claims it has challenged”); Boston Sci. Scimed, Inc. v. Cook Grp. Inc., 809 F. App’x 984, 990 (Fed. Cir. 2020) (non-precedential) (recognizing that the “Board need not address issues that are not necessary to the resolution of the proceeding” and, thus, has “discretion to decline to decide additional instituted grounds once the petitioner has prevailed on all its challenged claims”).” slip op. at 17

  Patent outcomesUS 8,434,966 mixed
  Claim construction§ 103 obviousness
  Patents in suitUS 8,434,966
• Chanel, Inc. v. Molo Design, Ltd.Some claims unpatentable
  PTAB · Aug 9, 2023 · IPR2022-00545 · APJ Carl M Defranco · IPR · Final written decision

  Claims 19–25 and 27 are unpatentable as obvious over MacAllen with the cited references; claims 1–10, 12, 14, and 18 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Chanel argues, with support from its declarant, Mr. Rake, that one skilled in the art during the relevant time frame “would have a bachelor’s degree and at least two years of relevant experience working as an industrial designer, interior designer, furniture designer, architect, or other similar professional” and “would be knowledgeable regarding furniture design and/or the design of exhibit and display systems, and would have a general understanding of related manufacturing processes.” Pet. 21–22 (citing Ex. 1003 ¶¶ 42–46). Molo does not contest Chanel’s definition, and Mr. Rake agrees that it accurately reflects the level of skill in the art. See Pet. Reply 1 (“The parties agree on the POSITA and level of ordinary skill in the art.”); Ex. 2010 ¶ 34 (“I believe this is an accurate definition of a POSITA and 13 Although occasionally we may focus on Molo’s arguments, we do not shift the ultimate burden from Chanel. We focus on Molo’s arguments simply to identify issues in dispute, some of which we find unpersuasive in view of the record as a whole. have used this for my analysis.”). Because Chanel’s definition of the level of skill in the art appears reasonable and consistent with the ’161 patent and the prior art, we adopt it for purposes of our analysis.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalTerm construed board ownDecided for petitioner

    “The meaning of “freestanding” set forth in our Institution Decision is consistent with the Specification and prosecution history of the ’161 patent. For instance, during prosecution, the applicants rebutted the Examiner’s finding that “supports are required for the structure to be freestanding” by representing that “the extended wall, which is the structure itself, is freestanding when the base of the wall is placed on the floor of a room” and is “without supports.” Ex. 1002 at 185, 190 (first emphasis added). Based on that representation—that the expanded structure is capable of standing on its own without additional supports that are not part of the structure itself— the Examiner allowed the claims. See id. at 192. The Specification also supports that the expanded structure is freestanding in the absence of additional supports due to foldable supports 14 and 16 being adhered to end panels 18d at opposite ends of the core so as to be part of the structure itself— An end panel 18d of the core is connected to respective ones of the supports 14 and 16 over its entire width. The supports 14 and 16 are made from a self-supporting material, typically a non woven felt material, which has a degree of flexibility but also has sufficient rigidity to resist collapse of the core 12. The supports 14 and 16 extend laterally beyond the core as indicated at 32 and are adhered to respective ones of the end panels 18d. * * * Once partially extended, the supports 14 and 16 may be folded along a vertical axis to provide enhanced rigidity at each end of the partition 12. * * * [T]he supports 14, 16, at the free ends of the partition [are] folded upon themselves to provide stable support. Ex. 1001, 4:50–61, 5:12–14, 5:57–59. With that intrinsic evidence in mind, we maintain the construction in our Institution Decision that the term “freestanding” means “standing alone free of support or attachment.”” slip op. at 10

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “We disagree on both counts. Chanel’s justification for folding the end panels of SoftHousing I into tubular supports finds absolutely no support in the record, and instead, amounts to impermissible hindsight. More specifically, Chanel’s first justification—“functional reasons”—most certainly is derived from the ’161 patent itself, which states unequivocally that “supports 14 and 16 may be folded along a vertical axis to provide enhanced rigidity at each end of the partition 12.” Ex. 1001, 5:12–14. Nowhere does Chanel or its declarant, Mr. Rake, point us to any teaching in SoftHousing I or other prior art indicating that folding the end panels of a honeycomb-like structure into tubular supports was known to enhance its structural integrity. Instead, Chanel’s sole evidence for modifying SoftHousing I, be it for functional or aesthetic reasons, is the unsupported and conclusory opinion testimony of Mr. Rake. See Pet. 40–41 (citing Ex. 1003 ¶¶ 134–137). But nowhere does Mr. Rake provide any evidentiary support for his conclusions. Instead, he simply opines generally on the limits of folding paper effectively—“[T]here’s kind of a limit to how you can manipulate paper effectively, and one of the things you do is fold it. That’s, like, first off. Take a piece of paper, it has no structure, no strength, and you put a fold in it, and you can probably stand it on a – on a desk.” Ex. 2011, 200:3–14. But that testimony says nothing about folding paper into a tubular shape, let alone folding end panels of a honeycomb structure into a tubular shape. As such, we reject the notion that Mr. Rake’s testimony provides credible support for modifying the paper-like end panels of SoftHousing I into tubular supports.” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Unlike SoftHousing I, Okuno discloses rigid supports—namely, “substrates 1, 1”—for a honeycomb structure. See Ex. 1011 at 2, Fig. 1. However, Chanel fails to explain why one skilled in the art would have looked to Okuno’s lampshade to modify a partition wall as disclosed in SoftHousing I. Although Chanel states that both are constructed of honeycomb structures, so too are many other objects, including beehives, window shades, collapsible containers, and expandable benches, chairs, and tables. See Ex. 1003 ¶ 55. So, it was incumbent on Chanel to state a more compelling reason for combining the teachings of SoftHousing I and Okuno than simply they share a common material, i.e., a honeycomb-like core. Indeed, conspicuously absent from Chanel’s evidence is any testimony from Chanel’s declarant, Mr. Rake, regarding a reason to combine Okuno with SoftHousing I. See Ex. 1003 ¶ 141 (relying solely on SoftHousing I for teaching the subject matter of claims 12 and 14); see also Pet. 43–44 (lacking citation to Mr. Rake’s declaration). Without more, we are not persuaded that Chanel articulates sufficient reasoning with rational underpinning for combining Okuno’s teachings with SoftHousing I. Thus, we determine that Chanel fails to demonstrate that dependent claims 12 and 14 would have been obvious over SoftHousing I and Okuno.” slip op. at 25

  Patent outcomesUS 9,689,161 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR
  Patents in suitUS 9,689,161
• Siemens Industry Software Inc. v. Synopsys, Inc.Some claims unpatentable
  PTAB · Jan 11, 2023 · IPR2021-01215 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–5, 7, 8, 11–15, 17, 18, and 21–24 are unpatentable over Yoshimura-based grounds; claims 6, 9, 10, 16, 19, and 20 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “B. Level of Skill in the Art Petitioner offers an assessment as to the level of skill in the art as of the time the ’655 patent was filed. Pet. 9. For purposes of this proceeding, Petitioner and Petitioner’s declarant “adopt the [following] definition for the person of ordinary skill in the art”: “a Bachelor of Science degree in Electrical Engineering or Computer Engineering, and has either received academic credits for an ASIC design course or completed at least one year of work experience in the VLSI design, electronic design automation for VLSI, or ASIC design fields.” Id. at 9–10; Ex. 1003 ¶ 78 (Robins Declaration). Patent Owner applies the same definition. Resp. 5. To the extent necessary, we accept this definition because it is supported by the Robins Declaration and consistent with the ’655 patent and the asserted prior art.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Although the phrase “separate from,” is not found in the claims, we look to the language of the claims, the description in the patent disclosure, and the prosecution history to determine what type of separateness is required by the claims. We start with the relied-upon Figure 4 of the ’655 patent, which illustrates a box labeled “Multi-Scenario ECO Database 426” that is near, but not overlapping with or surrounding, boxes labeled “Image 424” through “Image 422” and “Image 420.” Ex. 1001, Fig. 4. The ’655 patent also describes a storage device 408 as “storing scenario images 420– 424 that correspond to different scenarios,” and “can additionally store multi-scenario ECO database 426,” which “can include circuit information for multiple scenarios that can be used to estimate the impact of ECOs in multiple scenarios.” Ex. 1001, 5:9–11, 5:18–21.” slip op. at 9

  • Prior constructionPrior construction adoptedDecided for patent owner

    “determin[e/ing . . . ] an ECO to fix one or more design requirement violations, wherein said determining includes identifying an ECO to fix a design requirement violation in the scenario and checking that ECO against at least some of the multiple scenarios by estimating parameter values based on parameter values stored in the scenario image and the multi-scenario ECO database. Resp. 10 (citing Ex. 2001, 21-24). In reviewing the term, the District Court explained that the multi- scenario ECO database “stores parameters and allows for a quick estimation of an ECO’s impact across multiple scenarios.” Ex. 2001, 19. The District Court further summarized the ’655 patent as describing that a scenario image is “[f]irst” loaded, and if there is a design requirement violation, an ECO is determined for that scenario, and then subsequent scenarios are loaded to check whether the ECO from the first scenario will create new, or exacerbate existing, design violations. Id. (citing Ex. 1001, 4:21–33). However, as recognized by the Court, the process at the cited section is described in the ’655 patent as an “approach [that] may take an impracticably long time to fix design requirement violations in multiple scenarios” due to the long time that is required to load a scenario image. Id. at 24; Ex. 1001, 4:43–47. The Court reasoned that in order to determine an ECO to fix a violation, “determine” must involve “identifying” a possible fix and “checking” whether that fix is suitable. Id. at 23. Thus, the District Court’s construction requires both identifying and checking as part of the claimed determining step. Id. at 23–24. We agree with the District Court’s reasoning, and apply their construction in this proceeding.” slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)UnpatentableUnpatentable

    “Petitioner assertion that Yoshimura’s estimation in step S5 is performed to check an identified ECO is supported by the record. In determining the change to be made (the ECO), Yoshimura uses estimated parameters for the third and fourth corner conditions, calculated in step S5 through the “Hold Margin” equation. Ex. 1007, 6:63–67. Those third and fourth corner conditions are then used to check potential layouts identified in step S6. Id. at 7:18–20 (“In step S6, the automatic EC device 16 searches for a layout that does not cause a timing error under any one of the first to fourth comer conditions from the analysis results of step S4 and step S5.”). In this manner, step S5 sets an initial third corner condition having estimated parameter values that is included, as the initial step, in checking an identified ECO at steps S6–S8. Thus, Yoshimura’s determination of a change to satisfy the corner conditions is, to use Dr. Edward’s phrase, “based on” its third and fourth corner conditions having parameters estimated in step S5. For this reason, we determine that Petitioner has sufficiently shown that Yoshimura discloses the claimed limitation.” slip op. at 20

  Patent outcomesUS 8,407,655 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,407,655

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.