• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentable
  PTAB · Jul 10, 2026 · IPR2025-00147 · APJ Linda E Horner · IPR · Final written decision

  The Board found claims 1–6 and 8–20 not shown unpatentable under three obviousness grounds, principally because the proposed combinations did not establish a feasible curved battery or transparent potting encapsulating the components.

  RulingsFinal written decision

  • Skill levelSkill level board ownOther

    “at least a four-year degree in electrical engineering, mechanical engineering, biomedical engineering, optical engineering, or related field of study, or equivalent experience, and at least two years’ experience in academia or industry studying or developing physiological monitoring devices such as non-invasive biosensors. Pet. 8 (citing Ex. 1002 ¶ 29). Petitioner also contends that a person of ordinary skill would have been “familiar with, e.g., sensor system design, including inertial and other motion sensor system design, and signal processing” and that “[a] higher level of education or skill might make up for less experience, and vice versa.” Id. Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. Resp. 25. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’124 patent and the references cited in the Petition.” slip op. at 10

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “We need not reach the issue of whether the preamble is limiting for purposes of determining patentability of the challenged claims. Even were we to agree with Patent Owner that the preamble is limiting and the claims are limited to a finger-worn ring wearable computer device, Petitioner has relied on Schröder in each ground to disclose a “wearable computing device configured to be worn around a finger of a wearer.” Pet. 22 (Ground 1), 45 (Ground 2, relying on Yuen for adding the functionality of light sources with a photodetector, temperature sensors, and varying the sampling frequency of sensor data acquisition), 56 (Ground 3). We agree with Petitioner that Schröder discloses such a device. Thus, no explicit claim construction is necessary for this decision.” slip op. at 11

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successReasonable expectation not foundNot shown unpatentableNot shown unpatentable

    “We are not persuaded by Petitioner’s arguments and find that Patent Owner has the better position for several reasons. First, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor, and “would have to be reduced in size on the 6 There is no Exhibit 2022 in the record of this case. magnitude of 5-10x from its current size to fit in a ring of Schröder.” Resp. 38 (citing Dr. Anthony’s cross-examination testimony at Ex. 2021, 313:12). Second, Petitioner relies on evidence in the Reply that Petitioner failed to specifically identify in the Petition. Compare Reply 3–5 (citing Ex. 1369 ¶¶ 7–14; Ex. 1079 ¶¶ 47, 71; Ex. 2022, 138:7–143:1; Ex. 1002 ¶¶ 96, 337; Ex. 2021, 12–13, 307:7–17; Ex. 2020, 212:6–214:13; Ex. 1081, 130:18–131:14; Ex. 1010 ¶ 168), 9 (referring back to Section § II.B.2) with Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99; Ex. 1010 ¶¶ 157, 163, 168, 201, Fig. 6). More specifically, while the portion of Dr. Anthony’s Declaration cited in the Petition (see Pet. 25–26 (citing Ex. 1002 ¶¶ 193–99)) mentions the Technology Background Section V of his Declaration (Ex. 1002 ¶¶ 42–147), neither Petitioner nor Dr. Anthony sufficiently explains what evidence supports his opinion that it was feasible to incorporate batteries or battery-like devices into finger-rings, or how a person of ordinary skill in the art would have miniaturized a curved battery for incorporation into Schröder’s ring. Ex. 1002 ¶ 196 (describing that rechargeable batteries powering wearable electronic devices were “well-known by 2013” and “had also undergone significant advances in terms of miniaturization and energy density [that] made it feasible to incorporate batteries or battery-like devices such as supercapacitors into smaller form factors, such as finger rings, without sacrificing functionality” such as “lithium-polymer (Li-Po) batteries and solid-state batteries.”). Moreover, some of Petitioner’s citations in the Reply appear to be incorrect as there is no Exhibit 2022 of record in this case, as noted above. These issues undermine the strength of Petitioner’s showing by making it difficult to follow its reasoning, much less identify where in the record that reasoning finds support. See DeSilva v. DiLeonardi, 181 F.3d 865, 866–67 (7th Cir. 1999) (“A brief must make all arguments accessible to the judges, rather than ask them to play archaeologist with the record.”); United States v. Dunkel, 927 F.2d 955, 956 (7th Cir. 1991) (“Judges are not like pigs, hunting for truffles buried in briefs.”). Third, even considering Petitioner’s new Reply arguments and” slip op. at 27

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “We credit Dr. Mercier’s testimony over Dr. Anthony’s and agree that Dr. Anthony’s testimony fails to account for the constraints of a substantially smaller form factor in Schröder’s finger-ring as compared to Mestas’s wrist device. Ex. 2018 ¶ 140. Although large curved batteries suitable for use in a wrist band or other larger wearable device, such as shown in Mestas, were known at the time of the ’124 patent, we also have evidence that prior art “finger ring wearables up to the ’124 patent had used ‘coin’ type batteries.” Resp. 40 (citing Ex. 2018 ¶ 140). We credit Dr. Mercier’s testimony that a person having ordinary skill in the art would have looked to a coin type battery for the necessary power requirements of Schröder’s device. Ex. 2018 ¶ 141. Indeed, this testimony is consistent with the other art of record that consistently shows the use of flat batteries in finger-ring devices, often stacked above and protruding from the general ring shape of the device. See, e.g., Ex. 1005 (Niwa), Figs. 22, 28; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura patent), Fig. 24; Ex. 2018 ¶¶ 74–84. In fact, Oura’s first-generation ring design, released in 2015, used a Superbowl ring type design, with the battery and other components mounted on top of the ring. Ex. 2034; Ex. 2018 ¶ 85. We also agree with Dr. Mercier that Dr. Anthony’s testimony lacks evidence or a technical analysis of the power requirements for the various sensors he suggests including in a wearable device and the capacity of the proposed GMBPow battery. See, e.g., Ex. 1002 ¶¶ 94, 210, 214–17; Ex. 2018 ¶ 97. Moreover, Dr. Anthony does not address the issues with the batteries that are identified in the references he discusses. For example, Dr. Anthony does not address Lee’s disclosure that “direct coating of electrode slurry onto plain paper led to the occasional internal-shorting of the device due to the leakage of the electrode material through a large-sized hole in the paper.” Ex. 1019, 2415. In contrast, Dr. Mercier discusses the pitfalls the skilled artisan faced in developing finger-ring devices. See, e.g., Ex. 2018 ¶¶ 77–79 (discussing the issues Rhee’s and Asada’s large rings), 83 (identifying power requirements as a design constraint). For example, Dr. Mercier explains that “flexible or curved batteries include flexible packaging materials such as aluminum laminated films that house the electrodes and electrolyte” such that “once the battery packaging is added to a battery such as GMBPow and then placed within a housing (e.g., external housing shell and internal potting), the resulting device would have dimensions that are not suitable for a finger-worn ring.” Id. ¶ 96 (citing Ex. 2026).” slip op. at 34

  Patent outcomesUS 11,188,124 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,188,124
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 30, 2026 · IPR2025-00175 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–17 were not shown unpatentable because Petitioner failed to establish that Usui’s interconnect structure or Yu’s metal gate stacks satisfy the construed “electrode stack” limitation.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA” or “POSA”) would have had “at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design,” and “[a]dditional education could substitute for professional experience and vice versa.” Pet. 6 (citing Ex. 1002 ¶¶ 80–82). Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 6–7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’562 patent and the asserted prior art, we maintain Petitioner’s definition for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “comprises the recited metals and has the recited thickness, which forms an electrical contact for use on a semiconductor device generally or a group III- V semiconductor in particular. This is consistent with our determination that “electrode stack” is a conductor that provides a path for current entering or leaving a medium such as a semiconductor device We disagree with Patent Owner that “electrode stack” as used in the challenged claims should be limited to the specific electrodes shown in the embodiments described in the Specification. See PO Resp. 4–9. Although the Specification describes embodiments using source, drain, and Schottky gate electrodes as electrical contacts, we see no reason to construe the term “electrode stack” itself to be limited to these components as Patent Owner proposes. Claims 1 and 13 expressly recite that electrode stacks comprise the claimed “electrical contact,” without expressly including or precluding any specific type of electrode. Ex. 1001, 5:54–63, 6:37–47. The Federal Circuit advises that the Specification “is not a substitute for, nor can it be used to rewrite, the chosen claim language. ‘Specifications teach. Claims claim.’” SuperGuide, 358 F.3d at 875 (quoting SRI Int’l v. Matsushita Elec. Corp. of Am., 775 F.2d 1107, 1121 n.14 (Fed. Cir. 1985) (en banc)). The Specification does teach electrical contacts that include source, drain, and Schottky gate electrodes, but claims 1 and 13 are directed to electrical contacts that are not expressly so limited. Patent Owner’s proposed construction would effectively rewrite the claim by adding limitations, which we decline to do under the guise of claim construction. See id. (“Though understanding the claim language may be aided by the explanations contained in the written description, it is important not to import into a claim limitations that are not a part of the claim.”). In view of the foregoing, we construe the claim term “electrode stack” to mean “a conductor that provides a path for current entering or leaving a medium such as a semiconductor device.”” slip op. at 17

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential). In contrast, Patent Owner’s declarant Dr. Piner testifies, with evidentiary support, that interconnects (such as Usui’s interconnect metallurgy structure) and electrical contacts (such as that claimed in the ’562 patent) are not the same thing. See Ex. 2024 ¶¶ 63–70. For example, Dr. Piner explains: In other words, not all metals in a semiconductor device have the same purpose and could not be said to be interchangeable. By August 2009 it was well known to a POSA how to discern if a metal component in a transistor is an interconnect or serves as an electrical contact such as a gate contact or ohmic contact, based on the structure and functionality of the metal component. For example, interconnects are made up of metal strips and are deposited on insulators. EX-1011 (Mishra) at 216. Interconnects are low resistance conductors that can carry very high current densities. Id., 216, 217. Unlike Schottky contacts and ohmic contacts, interconnects do not provide non-linear IV response like Schottky contacts nor inject electrons and holes into semiconductors like ohmic contacts. Id., 218. As many of the references cited by Dr. Zhao illustrate, electrical contacts had their own highly complex design challenges. EX-1008 (Pearton), 41-59 (Pages 53-71 of 383) (discussing electrical contacts); EX-1017 (Kramer), 11-126 (Pages 18-130 of 151) (same). And while Dr. Zhao cites these as supporting a POSA’s knowledge of an electrical contact, none of these references describe electrical contacts as interconnects. Id. ¶ 71. Dr. Piner further testifies that Usui’s interconnect metallurgy structure is an interconnect, and not an electrical contact, because “Usui states that ‘[t]he structures fabricated by the process of the present invention are especially useful for forming electrical connections or wiring such as between active and/or passive devices of an integrated circuit structure.’” Id. ¶ 148 (citing Ex. 1004, 1:11–14) (alteration in original); see also id. ¶¶ 150– 151 (Dr. Piner testifying that Usui’s interconnect metallization structure is not an “electrode stack” under a broad definition of electrode). Dr. Piner’s testimony in this regard rebuts Petitioner’s and Dr. Zhao’s conclusory assertions to the contrary.” slip op. at 21

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “conductor that provides a path for current entering or leaving a medium such as a semiconductor device.” Thus, Petitioner must show that Usui’s layers 13–15, 18, and 19 provide a path for current entering or leaving a medium such as a semiconductor device. After reviewing the complete trial record, we are not persuaded that Petitioner has done so. Petitioner relies on the testimony of Dr. Zhao to support its contention that the identified layers in Usui’s interconnect metallurgy structure form an “electrode stack including a plurality of metal layers and a capping layer formed over said plurality of metal layers” as recited in claim 1. See Pet. 11–12 (citing Ex. 1002 ¶¶ 89–91). Neither Petitioner nor Dr. Zhao, however, provide adequate explanation or evidence as to why Usui’s interconnect metallurgy structure forms an “electrode stack,” i.e., a conductor that provides a path for current entering or leaving a medium such as a semiconductor device. Dr. Zhao’s testimony merely repeats the disclosures in Usui and concludes, without further technical detail, explanation, or reference to objective evidence, that Usui’s Figure 8 discloses an electrode stack. Ex. 1002 ¶¶ 89–91. Dr. Zhao’s testimony sets forth Petitioner’s conclusory assertions as though they are facts, rather than setting forth facts and evidence in support of those assertions. Compare id. with Pet. 11–12. Absent underlying facts or evidence to support Dr. Zhao’s opinion, the cited testimony “adds little to the conclusory assertion for which it is offered to support, and is entitled to little weight.” Xerox Corp. v. Bytemark, Inc., IPR2022-00624, Paper 9 at 15 (PTAB Aug. 24, 2022) (precedential).” slip op. at 21

  Patent outcomesUS 8,686,562 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,686,562
• Innoscience America, Inc. v. Infineon Technologies Americas Corp.No claims unpatentable
  PTAB · Jun 12, 2026 · IPR2025-00094 · APJ Christopher M Kaiser · IPR · Final written decision

  Claims 1–16 were not shown unpatentable under any asserted obviousness ground because Petitioner failed to establish the proposed modifications and combinations.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have possessed at least a four-year degree in electrical engineering or a closely related field, and at least two years of experience in semiconductor device design.” Pet. 5 (citing Ex. 1003 ¶¶ 67–69). Petitioner also argues that “[a]dditional education could substitute for professional experience and vice versa.” Id. Patent Owner does not dispute Petitioner’s proposed level of ordinary skill. PO Resp. 1–76. Neither party explains why the outcome of this case would be affected by the adoption of the proffered definition of a person of ordinary skill in the art. Accordingly, and because it appears to be consistent with the ’003 patent and the asserted prior art, we adopt Petitioner’s assessment of the level of ordinary skill in the art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Neither party proposes construing any claim terms. Pet. 6; Prelim. Resp. 1–76. In addition, as discussed below, we are able to determine the outcome of this proceeding without expressly construing any terms. Thus, we do not construe any terms for the purposes of this Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “challenged claim. Unigene Labs., Inc. v. Apotex, Inc., 655 F.3d 1352, 1360 (Fed. Cir. 2011). “This is so because inventions in most, if not all, instances rely upon building blocks long since uncovered, and claimed discoveries almost of necessity will be combinations of what, in some sense, is already known.” KSR, 550 U.S. at 418–419. On the other hand, an obviousness analysis “need not seek out precise teachings directed to the specific subject matter of the challenged claim, for a court can take account of the inferences and creative steps that a person of ordinary skill in the art would employ.” Id. at 418; accord In re Translogic Tech., Inc., 504 F.3d 1249, 1259 (Fed. Cir. 2007). However, a petitioner cannot satisfy its burden of proving obviousness by employing “mere conclusory statements.” In re Magnum Oil Tools Int’l, Ltd., 829 F.3d 1364, 1380 (Fed. Cir. 2016). Instead, a petitioner must articulate a reason why a person of ordinary skill in the art would have combined or modified the prior art references. In re NuVasive, Inc., 842 F.3d 1376, 1382 (Fed. Cir. 2016); see also Metalcraft of Mayville, Inc. v. The Toro Co., 848 F.3d 1358, 1366 (Fed. Cir. 2017) (“In determining whether there would have been a motivation to combine prior art references to arrive at the claimed invention, it is insufficient to simply conclude the combination would have been obvious without identifying any reason why a person of skill in the art would have made the combination.”); Belden Inc. v. Berk-Tek LLC, 805 F.3d 1064, 1073 (Fed. Cir. 2015) (“[O]bviousness concerns whether a skilled artisan not only could have made but would have been motivated to make the combinations or modifications of prior art to arrive at the claimed invention.”) (citing InTouch Techs., Inc. v. VGO Commc’ns, Inc., 751 F.3d 1327, 1352 (Fed. Cir. 2014)). In arguing for the obviousness of claim 1 over the combination of Bonn and Mizuta, Petitioner argues that a person of ordinary skill in the art would have modified Bonn to perform high-frequency signal amplification. Pet. 19–25. In particular, Petitioner argues that a person of ordinary skill in the art “would have found it obvious to modify the circuit of Figure 1 [of Bonn] and use Figure 7’s structure for high frequency signal amplification in place of mixer 40,” followed by additional modifications to the circuit of Figure 1. Id. at 22–25. These additional modifications include removing LO port 55, removing FET 20 (along with voltage source 80, capacitors 16, 26, and 34, resistor 18, and inductors 22 and 24), removing capacitor 34 and shorting gate structure 324 to ground, and removing resistors 46 and 48 and shorting terminal 51 to ground. Id. According to Petitioner, the motivation for these modifications was that “Bonn . . . teaches using its dual gate structures for signal amplification without signal mixing.” Id. at 22 (citing Ex. 1006, 11:26–37). On the record developed at trial, we disagree. Bonn does, as Petitioner argues, teach that “the dual gate FET structure of the present invention can be tailored to provide superior performance over the prior art dual gate FET structures in high frequency signal mixing as well as other applications such as high frequency signal amplification.” Ex. 1006, 11:33–37. But the tailoring that Bonn refers to relates to changes to the structure of the field-effect transistor itself, not to the circuitry surrounding that transistor. Id. (teaching that the reason that “the dual gate FET structure of the present invention can be tailored” is that “the parameters such as gate width, dopant concentration, and channel depth, under each gate of the dual gate FET are individually adjusted for optimum performance”). Thus, although Bonn might have motivated a person of ordinary skill in the art to have made changes to the dual-gate FET itself, we are not persuaded that it would have motivated the additional changes to the circuit of Bonn’s Figure 1.” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Mishra’s Figure 5 is a second gate in favor of a new position. Petitioner’s new argument is that a person of ordinary skill in the art would have found it obvious to connect the field plate of Mishra’s Figure 5 to the source instead of the gate, converting the field plate into a second gate. Compare Pet. 83 (equating “drain side gate” with “field plate 66, Figure 5”), 86–88 (identifying field plate 66 as a “second gate”), with Reply 21–22 (identifying only the embodiment of Mishra’s Figure 10 as a source-connected field plate), 22–23 (arguing that Mishra teaches that the Figure 5 embodiment “could be arranged as ‘a single transistor with a dual gate structure’”). Although “the introduction of new evidence in the course of the trial is to be expected in inter partes review trial proceedings,” Genzyme Therapeutic Prods. LP v. Biomarin Pharm. Inc., 825 F.3d 1360, 1366 (Fed. Cir. 2016), the shifting of arguments is not, Wasica Fin. GmbH v. Cont’l Auto. Sys., Inc., 853 F.3d 1272, 1286 (Fed. Cir. 2017). Accordingly, Petitioner’s change of arguments here is inappropriate. Moreover, even if we were to consider Petitioner’s inappropriate new argument, we would conclude that Petitioner does not support the argument with sufficient evidence. “Whether [an obviousness ground] is based on combining disclosures from multiple references, combining multiple embodiments from a single reference, or selecting from large lists of elements in a single reference, there must be a motivation to make the combination and a reasonable expectation that such a combination would be successful, otherwise a skilled artisan would not arrive at the claimed combination.” In re Stepan, 868 F.3d 1342, 1346 n.1 (Fed. Cir. 2017). Petitioner’s new argument relies on a person of ordinary skill in the art modifying the Figure 5 embodiment of Mishra to connect the field plate to the source rather than the gate. Reply 21–24. Petitioner does not, however, show that a person of ordinary skill in the art would have had a motivation to make this modification or a reasonable expectation that this combination would be successful. Id. Petitioner argues instead that “[n]o ‘reason’ is needed.” Id. at 24. Thus, Petitioner does not show by a preponderance of the evidence that claim 1 would have been obvious over the combination of Mishra and Ren.” slip op. at 19

  Patent outcomesUS 8,264,003 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 8,264,003
• Shenzhen Tuozhu Technology Co., Ltd. v. Stratasys, Inc.No claims unpatentable
  PTAB · Jun 9, 2026 · IPR2025-00321 · APJ Christopher M Kaiser · IPR · Final written decision

  The Board held claims 1, 2, 5–7, 9, 16, and 17 not unpatentable because the asserted combinations did not establish the required purge-tower teachings or prior-art status.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that one of ordinary skill in the art “would have had (1) at least a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a related field, and (2) at least two years of research or industry experience in 3D printing or materials used for 3D printing.” Pet. 5 (citing Ex. 1003 ¶¶ 14–16). Petitioner also argues that “[a]dditional experience could substitute for a formal degree or formal training (and vice versa).” Id. Patent Owner proposes a slightly different level of skill, arguing that a person of ordinary skill in the art “would have had a bachelor’s degree in Mechanical Engineering, Computer Engineering, Chemical Engineering, Materials Science, or a comparable field and at least two years of experience related to 3D printing, with additional experience potentially being a substitute for a formal degree or training (and vice versa).” Prelim. Resp. 24. Neither party explains why the outcome of this case would be affected by the adoption of any of the proffered definitions of a person of ordinary skill in the art. We adopt Petitioner’s assessment of the level of ordinary skill in the art, as it appears consistent with the ’324 patent and the asserted prior art. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001).” slip op. at 8

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownOther

    “According to the ’713 patent, “[p]urge tower 24 itself may be . . . recycled or otherwise discarded as desired.” Ex. 1001, 8:27–28. This description provides some support for Patent Owner’s view, because a purge tower too intimately integrated with the part would be difficult or impossible to recycle or discard. This is further supported by the ’713 patent’s statement that “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Id. at 8:30–34. It also is supported by Dr. Hickner’s testimony that the ’713 patent “clearly shows . . . the 24 purge tower separated from the part” and that “the purge tower is a separate physical object.” Ex. 2016, 28:8–10, 64:1–9. On the other hand, there is evidence supporting Petitioner’s view that, as long as the purge tower is generally separate from the part and the support structure, it may still make contact with those portions of the print. As noted above, “purge tower 24 may be printed at any suitable location on build substrate 44 (i.e., at any location in the x-y build plane not occupied by 3D part 20 or support structure 22).” Ex. 1001, 8:30–34. This language does not exclude locations adjacent to or in contact with the part or the support structure. Thus, determine that a “purge tower,” as that term is used in the context of the ’713 patent, may not be an integrated portion of a printed part or support structure but need not be free of all contact with the printed part or support structure.” slip op. at 9

  • BurdenNot shown unpatentable

    “There is evidence of record to support both Petitioner’s view and Patent Owner’s view. On the record developed at trial, however, we cannot say that the preponderance of the evidence favors Petitioner, who bears the burden of proof. See 35 U.S.C. § 316(e). Accordingly, Petitioner has not shown by a preponderance of the evidence that KISSlicer teaches printing a layer of a purge tower each time the printer switches one extruder to the operating mode. Because proving the obviousness of claims 1 and 16 requires such a showing, Petitioner has not shown by a preponderance of the evidence that claims 1 and 16 would have been obvious over the combination of Priedeman and KISSlicer. 5. Analysis of Remaining Claims Claims 2, 6, 7, 9, and 17 all depend, directly or indirectly, from claim 1 or claim 16. Accordingly, they all include the limitations of either claim 1 or claim 16. Because, as discussed above, Petitioner has not shown that the combination of Priedeman and KISSlicer teaches or suggests all the limitations of claims 1 and 16, Petitioner also has not proven by a preponderance of the evidence that claims 2, 6, 7, 9, and 17 would have been obvious over that combination of references.” slip op. at 21

  • Obviousness (§103) › Analogous artAnalogous artOther

    “On the record developed at trial, we agree with Petitioner. According to several industry forum posts, people interested in three-dimensional printing located the website where KISSlicer was posted between February 2012 and April 2012. Ex. 1028, 1 (post discussing and directing others to KISSlicer on April 11, 2012); Ex. 1031, 1 (two posts discussing KISSlicer on March 16, 2012, and March 21, 2012); Ex. 1032, 1 (two posts discussing KISSlicer on February 11, 2012, and February 14, 2012). Thus, not only was it possible for people of ordinary skill in the art to locate KISSlicer; people of ordinary skill in the art actually did locate it. Accordingly, Petitioner has shown by a preponderance of the evidence that KISSlicer was publicly accessible.” slip op. at 19

  Patent outcomesUS 9,421,713 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 9,421,713
• Illumina, Inc. v. Molecular Loop Biosciences, Inc.No claims unpatentable
  PTAB · Apr 15, 2026 · IPR2024-01419 · APJ Susan L C Mitchell · IPR · Final written decision

  Claims 1–9 were not shown unpatentable because the asserted references failed to disclose the claimed correcting step, and Chee was not prior art to claims 1–3 and 9.

  RulingsFinal written decision

  • Novelty / Anticipation (§102) › Priority / effective filing date / continuation supportPriority date awardedReference not prior artDecided for patent owner

    “We have considered both parties’ arguments and evidence and determine that Patent Owner has presented sufficient evidence of reasonable the invention to practice every day during the critical period in order to demonstrate reasonable diligence. See Perfect Surgical Techniques, Inc. v. Olympus America, Inc., 841 F.3d 1004, 1009 (Fed. Cir. 2016). “[D]iligence need not be perfectly continuous—only reasonably continuous.” Arctic Cat Inc. v. GEP Power Prods., Inc., 919 F.3d 1320, 1331 (2019). The key question is whether, “in light of the evidence as a whole, the invention was not abandoned or unreasonably delayed.” Id. (internal quotations omitted). Applying this standard, we determine that Patent Owner sufficiently demonstrates reasonably continuous diligence throughout the critical period.” slip op. at 32

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “introduced during said workflow by collapsing target:differentiator tag combinations observed more than once into a single count.” Ex. 1001, 131:46–48 (emphasis added). The “determining step” of claim 2 recites “determining a consensus base call for the target nucleic acid molecule sequences,” but performs “collapsing all sequence reads comprising a same differentiator tag into a single read,” before the “determining step.” Id. at 131:49–53. Patent Owner proposes an interpretation of these “collapsing” and “determining” steps recited in claims 1 and 2 and asserts that they should be construed as distinct steps performed in a particular order in which the “collapsing step” is performed before the “determining step.” PO Resp. 42–45. We agree. First, Patent Owner asserts a person of ordinary skill in the art would have understood that the “collapsing step” of claim 1 is distinct from, and must occur before, the “determining step” of claim 2 based on the plain language of claims 1 and 2. PO Resp. 42–43. Patent Owner argues that the “collapsing step” and the “determining step” are distinct steps because claims 1 and 2 use different terms to describe these distinct steps that are performed sequentially according to the claim language. Id. (citing Ex. 1001, 131:47–54; Ex. 2023 ¶ 133; Ex. 2024, 57:11–58:22). More specifically, Patent Owner explains that claim 1 recites a “collapsing step,” followed by claim 2, which depends from claim 1 and refers to “collapsing” before “determining a consensus base call” such that “claim 2 describes determining a consensus base call from collapsed reads, not performing ‘collapsing’ by determining a consensus base call.” Id. at 42 (citing Ex. 1001, 131:47–54). collapsing corrects for skewing, an issue related to over- or under-amplification, which is a separate and distinct problem from the sequence errors that a consensus base call is designed to address.” Id. at 43 (citing Ex. 1001, 27:47–50, 32:29–34). Patent Owner contends further that “‘[c]ollapsing’ is a different step, performed separately from determining any consensus base call, to provide even greater accuracy when subsequently determining a consensus base call” such that “if one were to collapse by determining the consensus base call, errors from amplification bias could still be represented in the consensus base call generated.” Id. at 43–44 (emphasis omitted, citing Ex. 2023 ¶¶ 134–37). Second, Patent Owner argues a person of ordinary skill in the art would have understood that the “collapsing step” of claim 1 is distinct from the “determining step” based on the specification of the ’730 patent. PO Resp. 43–45. For example, Patent Owner explains that the specification states that “[f]or any target:differentiator tag combination observed more than once, all such reads are ‘collapsed’ into a single read before consensus basecalls are determined. This will cancel the effect of bias on consensus basecall accuracy.” Id. at 43 (emphasis omitted) (quoting Ex. 1001, 72:63– 73:5) (citing Ex. 2023 ¶¶ 133, 138–142).” slip op. at 11

  • Novelty / Anticipation (§102) › Anticipation standard (single reference, every element)Not shown unpatentableNot shown unpatentable

    “We have considered both parties’ arguments and evidence and agree with Patent Owner’s position. As discussed above, we agree with Patent Owner that the “collapsing step” recited in claim 1 and the “determining step” recited in claim 2 are two different steps required by the challenged claims such that “collapsing” does not mean determining a consensus base call or sequence, and must occur before any determining step. As a result, we determine Chee’s step of determining a consensus sequence does not disclose the “collapsing step” recited in claim 1 that requires collapsing “target:differentiator tag combinations.” We are also unpersuaded by Petitioner’s reliance on Chee’s process of correcting for amplification bias as disclosing the claimed collapsing step. As recognized by Patent Owner, the claim language of the “collapsing step” requires “collapsing target:differentiator tag combinations,” rather than collapsing only differentiator tags. In view of this requirement, Chee does not disclose the “collapsing step” because Chee teaches quantifying the starting nucleic acid molecules using their unique identifiers, rather than target:differentiator tag combinations. As Petitioner admits, “Chee’s technique for correcting amplification bias corrects quantitative errors without correcting sequencing errors” (Reply 15), whereas claim 1’s “collapsing step” corrects both quantitative errors and sequencing errors by using target:differentiator tag combinations. See Ex. 1001, 131:47–49 target:differentiator tag combinations).” slip op. at 41

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Given this claim interpretation requiring collapsing target:differentiator tag combinations, it is undisputed that McCloskey, who uses unique barcodes alone, does not teach this limitation. Petitioner does not rely on Bignell as teaching this collapsing step. Accordingly, we conclude Petitioner has not shown that the combination of Bignell and McCloskey teaches the “collapsing step” recited in claim 1. Because claims 4 through 6 depend from claim 1, they also require the “collapsing step” of claim 1 that is not taught by the combination of Bignell and McCloskey.” slip op. at 54

  Patent outcomesUS 11,840,730 not shown unpatentable
  Claim construction§ 102 anticipation§ 103 obviousnesscites Graham
  Patents in suitUS 11,840,730
• Alamar Biosciences, Inc. v. Olink Proteomics ABNo claims unpatentable
  PTAB · Mar 4, 2026 · IPR2024-01353 · APJ Tawen Chang · IPR · Final written decision

  Claims 1–20 were not shown unpatentable: the asserted obviousness grounds failed, including because Kanan and Neri did not teach selecting the claimed cis-reactive cells.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Accordingly, for purposes of this decision we adopt Petitioner’s proposal of a person of ordinary skill in the art, with the following changes noted in italics below: A person with “an advanced degree, such as a Ph.D., in organic chemistry, molecular biology, biochemistry, or a related field; and about two years of experience in industry and/or laboratory experience relating to small molecules and proteins and would have been familiar with nucleic acid chemistry and conventional hybridization techniques; and (b) access to one or more team members having an advanced degree, such as a Ph.D., in organic chemistry, molecular biology, biochemistry, or a related field; and about two years of experience in industry and/or laboratory experience relating to high throughput screening techniques such as nucleic acid sequencing. A person could also have qualified as a POSA with less formal education and more technical or professional experience.11 We emphasize, however, that our decision would not change if we instead used Patent Owner’s proposed definition of a POSA.” slip op. at 13

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “Because the parties have placed the limitation “selecting all cis- reactive cells exhibiting the detectable trace” into controversy, we construe the term below, but only to the extent necessary to resolve the controversy. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)). For the reasons discussed below, we agree with Patent Owner that the plain and ordinary meaning of this phrase, in light of the language of the claims, the Specification, and the prosecution history of record, requires “selecting all of the [molecular complexes or structures] meeting the defined criteria for [cis-reactive cells (CRCs)] and exhibiting the detectable trace.” Sur-reply 8 (citing Ex. 2008 ¶¶ 94, 98–119). We further agree that cis-reactive cells should be construed to mean “an association of at least two interactor moieties, joined by an associated oligonucleotide.” (PO Resp. 9 (quoting Ex. 1001, 9:35-37)). Accordingly, we determine that, properly construed, the claims require that what is “selected” at step 1(d) — what is differentiated or set apart from other molecular complexes or structures in the reaction mixture at the conclusion of step 1(d) — to be “an association of at least two interactor moieties joined by an associated oligonucleotide” that exhibits the detectable trace.” slip op. at 16

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “We agree that Petitioner has not shown that the combination of Kanan and Neri teaches “selecting all cis-reactive cells exhibiting the detectable trace,” as we have construed that phrase above. In particular, we determine that, properly construed, the limitation requires the selection of “all associations of at least two interactor moieties joined by an associated oligonucleotide and exhibiting the detectable trace.” Instead, as described in Kanan, what is “selected” is the molecules of interest joined by bond formation, with only one of the molecules of interest coupled to a nucleic acid moiety. Thus, the selected molecular complex or structure does not comprise two interactors (i.e., two molecules of interest coupled to NAMs). Moreover, to the extent there are two interactors, they are joined by the bond between the molecules of interest rather than an associated oligonucleotide.” slip op. at 35

  • ExcludeMotion to exclude, deniedDenied

    “III. PATENT OWNER’S MOTION TO EXCLUDE EVIDENCE Patent Owner moved to exclude Exhibit 1008, on the ground that it contains settlement statements and that Rule 408 of the Federal Rule of Evidence prohibits Petitioner from using the statements to impeach or contradict Patent Owner. Mot. 5. Because we do not rely in our analysis on this exhibit, we dismiss the Motion to Exclude as moot.” slip op. at 43

  Patent outcomesUS 7,883,848 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 7,883,848
• Axion Biosystems, Inc. v. Agilent Technologies, Inc.No claims unpatentable
  PTAB · Feb 2, 2026 · IPR2024-01467 · APJ David Cotta · IPR · Final written decision

  Claims 1–8 and 11–15 were not shown unpatentable over Xu-752 and Jones because the proposed combination did not establish obvious millisecond time resolution.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner contends a person of ordinary skill in the art (“POSA”) as of May 2009 “would have had a B.S. in electrical/mechanical/biomedical engineering or biological science, or a related field, and approximately 2 years of relevant experience or equivalent study in systems and methods for bioanalysis of cells.” Pet. 14 (citing Ex. 1003 ¶¶ 23–25). Patent Owner adopts this definition for purposes of this proceeding. PO Resp. 9 (citing Ex. 2009 ¶ 19). We find Petitioner’s description of the level of ordinary skill in the art to be consistent with the level of skill reflected in the ’508 patent and in the prior art of record. Accordingly, we apply Petitioner’s definition in this decision.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Lexicography (patentee as own lexicographer)Term construed petitioner constructionDecided for petitioner

    “As used herein, “impedance measurement at millisecond time resolution” refers to the ability to perform a series of at least two consecutive impedance measurements within milliseconds of one another for each and every well of the system where each well is associated with an electrode array for impedance measurement. In each instance the time between two consecutive impedance measurements are less than 300 milliseconds from one another. Id. at 10:8–15. There does not appear to be any dispute as to the definitional nature of the first sentence in the passage above. That is, the parties agree that millisecond time resolution should be construed to mean: “the time between two consecutive impedance measurements for each and every well being evaluated in the claimed apparatus or system.” PO Resp. 15 (proposing construction); Pet. Reply. 23 (“Axion also agrees that the term ‘millisecond time resolution’ is ‘the time between two consecutive impedance measurements for each and every well being evaluated in the claimed apparatus or system.’”). The parties also agree that we do not need to determine whether the time interval between two consecutive impedance measurements is less than 300 milliseconds, as set forth in the definition portion of the specification, or whether it can be met by some other time interval, as suggested by other portions of the specification. See e.g., Ex. 1001, 23:49–55 (explaining that “[i]n some embodiments 500 millisecond time resolution is sufficient”), 24:37–39 (similar); PO Resp. 15 (arguing that “the distinction between 300 milliseconds and 500 milliseconds is immaterial to the dispute in this IPR because Jones teaches a 1.5 second update period, thus at least three times longer than the 500 milliseconds formulation”); Pet. Reply 23–24 (section headed “[Petitioner] Agrees That, In This IPR, The 300 Versus 500 Milliseconds Distinction is Immaterial To Addressing the Unpatentability of the Challenged Claims”), see also, Pet. Reply 24–26 (asserting that the claims are indefinite because it is not clear whether they require a 300 or a 500 millisecond time interval, but arguing that “the claims’ unpatentability can be determined without resolving the 300 versus 500 milliseconds indefiniteness issue”). We agree with the parties that “millisecond time resolution” should be construed to mean: “the time between two consecutive impedance measurements for each and every well being evaluated in the claimed apparatus or system.” PO Resp. 15; Pet. Reply. 23. We further agree that resolution of this case does not require that we determine whether the period between two consecutive impedance measurements is less than 300 or less than 500 milliseconds because Petitioner has not carried its burden under either time interval.” slip op. at 7

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “Ex. 1003 ¶ 179. But Dr. Kim does not cite to any additional supporting evidence or provide any technical reasoning to support his statements. The notion that one can reduce the time between measurements by, e.g., reducing the number of frequencies measured, has intuitive appeal and appears mathematically correct. However, the absence of technical reasoning and supporting evidence diminishes the persuasiveness of Dr. Kim’s testimony that the POSA would made such modifications to reduce the time between measurements. Dr. Kim does provide some technical reasoning in connection with his discussion of eliminating all reference channels as a way to get the time resolution down to the levels required by, e.g., claim 14, which recites a millisecond time resolution of “less than 5 milliseconds.” See e.g., Ex. 1003 ¶ 172 (“A POSA seeking to study biological cell phenomena occurring on the order of a few milliseconds would have recognized that after measuring the reference network channels at the start, the reference network channels would not need measured again for some time, e.g., because temperature and other drift factors do not change appreciably on a millisecond time scale.”). However, even if we were to credit this testimony, Dr. Kim still lacks support and reasoning for the selection of the other parameters in his noreference-channel calculations. See, e.g., id. ¶ 173 (positing, but not providing technical reasoning for using, a no-reference-channel impedance system with 16 wells, a single 10kHz measurement frequency, and 16 daughter boards that measure simultaneously rather than sequentially).” slip op. at 29

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable

    “Given that Jones’s only exemplified embodiment targets a 1.5 second update period, that Jones does not suggest reducing the update period, and that much of Jones’s focus is on benefits other than speed of measurement, Jones’s impedance analyzer seems an unlikely choice for a POSA seeking to take measurements having millisecond time resolution. Put another way, we find no persuasive non-hindsight reason that supports Petitioner’s assertion that the POSA would have sought to apply Jones’s impedance analyzer to Xu-752’s system in order to take measurements in millisecond time resolution.” slip op. at 22

  Patent outcomesUS 11,906,508 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,906,508
• Samsung Electronics Co., Ltd. / Samsung Electronics America, Inc. v. Ouraring, Inc.No claims unpatentable
  PTAB · Jan 30, 2026 · IPR2024-01078 · APJ Neil T Powell · IPR · Final written decision

  Claims 1–6, 11–15, and 38–43 were not shown unpatentable because Petitioner failed to establish obviousness over the asserted combinations, including the feasibility and motivation to use curved batteries in a ring.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for petitioner

    “Patent Owner agrees with Petitioner’s proposed definition of a person of ordinary skill in the art. PO Resp. 22; see also Ex. 2018 ¶ 27. We adopt this uncontested definition of the level of ordinary skill in the art. This definition is supported by the record and consistent with the disclosure in the ’953 patent and the references cited in the Petition.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner expresses that it “does not believe that any term requires express construction.” Pet. 8. “Patent Owner agrees with Petitioner that no terms need to be construed.” PO Resp. 22. We agree with the parties that resolution of their dispute does not require us to construe any claim terms. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy controversy) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “be improper hindsight in Petitioner’s position. Petitioner and Dr. Anthony assume that a POSITA would position the battery between Schröder’s ring halves and implement Mestas’s curved battery because it “allows a larger battery to conform to a ring’s circular shape without stressing the battery or ring housing.” Pet. 60, 64–65; Ex. 1002 ¶¶ 337, 351–354. That position, however, ignores alternative designs that are at least equally supported by Schröder’s disclosure (see Ex. 1007, Fig. 3), but would not result in a ring configured as recited in the challenged claims. Petitioner attempts to downplay this concern by characterizing the modification of Schröder’s ring to include Mestas’s curved battery as an obvious “matter of choice” in design. See Reply 10–11 (citing Ex. 1079 ¶¶ 71–77). We disagree. As explained above, the record supports Patent Owner’s argument that Mestas’s batteries are much too large to fit within a ring form factor because they are “5 to 10 times” the size that would be required for a finger ring. PO Resp. 27 (quoting Ex. 2021, 313:12). Petitioner argues that it “does not propose bodily incorporating Mestas’s battery into Schröder’s ring,” which on the surface is correct. See Reply 10. But this does not help Petitioner meet its burden because its actual obviousness theory that “a POSITA would have found it trivial to implement Mestas’s teachings into a ring like Schröder’s ‘finger-ring’” is not persuasive. See Pet. 60 (citing Ex. 1002 ¶ 338). For the same reasons explained in Section II.D.1 above in our analysis of Ground 1, Dr. Mestas’s teaching of a curved battery (Ex. 1002 ¶ 338) in the much smaller form factor of Schröder’s ring is not credible. See Ex. 2021, 315:9–318:9 (acknowledging that it would have been beyond the level of ordinary skill to miniaturize Mestas’s battery, but that a POSITA could try to procure one); 321:5–10 (conceding that he did not try to ascertain whether such a battery was available in the relevant time frame). Instead, we credit Dr. Mercier’s testimony that Petitioner’s proposed modification would have presented intractable practical challenges. Ex. 2018 ¶¶ 228, 230–240 (describing various aspects of battery design that Dr. Anthony did not consider). As before, Dr. Mercier’s testimony is further supported by evidence showing a consistent pattern of flat battery use in prior art finger-ring devices. See, e.g., Ex. 1005 (Niwa), Figs. 22, 29; Ex. 2025 (Asada ’701 patent), Fig. 4; Ex. 1035 (Rhee), Figs. 7-1, 8-1, 8-2; Ex. 1037 (Asada article), Fig. 9; Ex. 1034 (Asada ’199 patent), Fig. 2; Ex. 1028 (Kimura), Fig. 24; Ex. 2018 ¶¶ 57–67. In sum, Petitioner’s showing for limitation 1[c] is deficient in multiple respects. First, Petitioner assumes that an ordinarily-skilled artisan would have been motivated to implement Mestas’s curved battery in the much smaller interior space occupied by Schröder’s inlay 12 without sufficiently considering the feasibility of that modification or alternative designs suggested by Schröder. Second, even if we accept Petitioner’s purported rationale for the combination (which we do not because we find it that it is predicated on improper hindsight), Petitioner has not shown that an ordinarily-skilled artisan would have had a reasonable expectation of successfully implementing the proposed modification.” slip op. at 46

  • Obviousness (§103) › Objective indicia / secondary considerations › NexusObjective indicia with nexusDecided for patent owner

    “We find that the evidence presented by Patent Owner is sufficient to establish that the Oura Ring Gen. 3 Horizon and Gen. 4 products are commercial embodiments of claim 1 of the ’953 patent and that claim 1 is coextensive in that it encompasses the entire structural apparatus of these products. See PO Resp. 82–92; Ex. 2018 ¶¶ 322–346 (comparing these products to claim 1); Ex. 2029; Ex. 2030; Ex. 2118; Ex. 2119.9 Indeed, Petitioner does not challenge any aspect of Dr. Mercier’s limitation-by-limitation analysis showing that these products practice claim 1. But more than just practicing the claimed invention, Patent Owner’s evidence supports that claim 1 recites the overall structure that provides for the particular form factor of the Oura Ring Gen. 3 Horizon and Gen. 4 products, i.e., a fingerring “wedding band” design that allows for the electronic components to be entirely contained within the ring housing with a curved external surface having no protrusions or bulges. Ex. 2018 ¶¶ 359–360; see also id. ¶¶ 322–346 (pictures depicting wedding band design of the Oura Ring Gen. 3 Horizon and Gen. 4 products); Ex. 2019 ¶¶ 47–49 (“[Patent Owner’s] decision to highlight the ring form factor indicates this feature’s importance to the marketplace success of the Oura Ring.”). We disagree with Petitioner’s assertion that the Oura Ring Application and/or Oura Membership are essential, unclaimed features such that a presumption of nexus is not appropriate. The Oura Application functions in conjunction with the Oura Ring to form a “complete solution” 9 Patent Owner and Dr. Mercier only compare these products to claim 1. Patent Owner has not demonstrated a nexus to independent claim 38. ¶¶ 20–21. The Oura Application cannot receive or display any information absent the Oura Ring’s ability to collect the information from the user. Id. Even though the Oura Application may provide additional unclaimed functionality, such as displaying activity, sleep, and readiness scores based on the data collected by the Oura ring that allow “a user to take advantage of the ring’s offerings,” this functionality is secondary to the ring’s ability to collect that data, without which, the Oura Application would serve no purpose. See Ex. 2019 ¶ 21; Ex. 2024, 93:22–95:22. As the Federal Circuit has explained, “there is rarely a perfect correspondence between the claimed invention and the product.” Fox Factory, 944 F.3d at 1374. Here, we find that on the spectrum of “unclaimed features,” the Oura Ring Application is closer to the “insignificant features” end because, while it allows the user to access and interpret data tracked by their Oura Ring, it does not materially impact the functionality of the Oura Ring or its structure.10 See Teva 8 F.4th at 1361 (explaining that “like the coextensiveness requirement itself, the concept of unclaimed features is best viewed as part of a spectrum”).” slip op. at 27

  Patent outcomesUS 10,281,953 not shown unpatentable
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,281,953
• MSN Laboratories Private Ltd. / MSN Pharmaceuticals Inc. v. Bausch Health Ireland LimitedNo claims unpatentable
  PTAB · Jan 27, 2026 · IPR2023-00016 · APJ Michael A Valek · IPR · Remand

  On remand, the Board held claims 1–6 not shown unpatentable because unexpected results outweighed the prima facie obviousness case, and granted Patent Owner’s motion to exclude.

  RulingsRemand decision

  • RemandOther

    “the Court of Appeals for the Federal Circuit (“Federal Circuit”)See Paper 83 (“CAFC Decision”). The Federal Circuit did not disturb our determination that Petitioner “established a prima facie case of obviousness.” See CAFC Dec. 6–8. However, it took issue with the unexpected results analysis in the Decision, explaining that “without more explanation from the Board as to its determination that the experiments [offered by Patent Owner to show unexpected results] compared the challenged claims to the closest prior art, we cannot reach a judgment on MSN’s challenges to the Board’s holding of non-obviousness.” Id. at 14. Accordingly, the Federal Circuit vacated the Decision and remanded the case for further consideration of the unexpected results evidence. Id.” slip op. at 2

  • Expert testimonyPetitioner expert discountedPatent owner expert creditedDecided for patent owner

    “We agree with Patent Owner and credit Dr. Davies’s testimony (Ex. 2024 ¶¶ 210–215) that a POSA would not have expected the Glu3 substitution to produce such a result. Indeed, the premise for Petitioner’s “conservative substitution” rationale is that the Glu3 substitution would have been expected to produce an analog having similar properties to human uroguanylin. See, e.g., Pet. 1, 36 (stating that a POSA “would have expected this particular conservative substitution to retain excellent receptor-activating activity”); Reply 3 (urging that the reason to modify a known compound may be an expectation that the new compound will have “similar properties to the old”) (internal quotations omitted). Patent Owner’s HPLC data, however, demonstrate a difference in kind between the data for SP-304 (a single HPLC peak) and uroguanylin (two distinct peaks corresponding to the active and inactive topoisomer) after incubation under the same conditions. As Dr. Davies explains, “topoisomers exist as a mixture of compounds with different[] spatial conformations” that are “continuously interconverting between spatial conformations” with “varying degrees of interconversion stability.” See Ex. 2024 ¶¶ 51–56. Thus, Patent Owner’s data show that the Glu3 substitution results in a peptide that is demonstrably more stable against interconversion than the parent, unmodified peptide.” slip op. at 35

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia with nexusObjective indicia outweighedDecided for patent owner

    “We find Patent Owner’s evidence persuasive to show that the Glu3 substitution results in an unexpected improvement in interconversion stability. As explained above, RP-HPLC was a known technique for separating the topoisomers of human uroguanylin. Ex. 2010, 230–231; Ex. 2011, 27–28; Ex. 2020, 223; Ex. 2028, TRUL00018269; see also Ex. 1063 ¶¶ 37, 40 (Petitioner’s expert confirming same). It was also known that one of human uroguanylin’s topoisomers was biologically active, whereas the other, i.e., what we and the parties refer to as the “inactive” topoisomer, had significantly less or no activity at the same concentration. Ex. 2011, 31 (“compound I shows significant activity in the cGMP producing assay, whereas compound II is practically inactive”); see also Ex. 2010, 238–239 (Fig. 8) (showing the “A isomer” had a potency “with a minimal concentration between 10-7and 10-8 M,” but that the B isomer “had virtually no effect on cGMP level at 10-6 M”); Ex. 2074, 48 (compound II “showed maximal 10% of the activity of compound I at 10-6 M”). The chromatograph for uroguanylin in Patent Owner’s data is consistent with these teachings, showing two peaks representing the active and inactive topoisomers. Compare Ex. 2028, TRUL00018269 (Fig. 1) with Ex. 2011, 28 (Fig. 2). The chromatograph for SP-304 shows a markedly different result, i.e., a “single peak,” which was confirmed “using the cGMP T84 cell assay” to represent “the fully active conformer of SP-304.” Ex. 2028, TRUL00018269; Ex. 2024 ¶¶ 208–209. We agree with Patent Owner and credit Dr. Davies’s testimony (Ex. 2024 ¶¶ 210–215) that a POSA would not have expected the Glu3 substitution to produce such a result. Indeed, the premise for Petitioner’s “conservative substitution” rationale is that the Glu3 substitution would have been expected to produce an analog having similar properties to human uroguanylin. See, e.g., Pet. 1, 36 (stating that a POSA “would have expected this particular conservative substitution to retain excellent receptor-activating activity”); Reply 3 (urging that the reason to modify a known compound may be an expectation that the new compound will have “similar properties to the old”) (internal quotations omitted). Patent Owner’s HPLC data, however, demonstrate a difference in kind between the data for SP-304 (a single HPLC peak) and uroguanylin (two distinct peaks corresponding to the active and inactive topoisomer) after incubation under the same conditions. As Dr. Davies explains, “topoisomers exist as a mixture of compounds with different[] spatial conformations” that are “continuously interconverting between spatial conformations” with “varying degrees of interconversion stability.” See Ex. 2024 ¶¶ 51–56. Thus, Patent Owner’s data show that the Glu3 substitution results in a peptide that is demonstrably more stable against interconversion than the parent, unmodified peptide.” slip op. at 34

  • ExcludeMotion to exclude, grantedGranted

    “motion. The American Peptide letter contains out of court statements from a third party submitted by the EPO opponent. The statements in the letter were not made under oath, nor is there evidence that Patent Owner was ever able to question the author of that letter or anyone else with personal knowledge of the statements therein. Petitioner argues that the American Peptide letter is evidence “to doubt that the ‘singular peak’ for uroguanylin in Liu represents the active topoisomer of uroguanylin” because it evidences that American Peptide “provided its customers with the ‘B’ (i.e., inactive) form of uroguanylin at the time.” Pet. Remand Resp. 25. That is, Petitioner relies on the American Peptide letter for the truth of the matters asserted therein. Such use plainly implicates the rule against hearsay and falls squarely within our prior reasoning for excluding the Currie submission portion of Exhibit 1067. We incorporate that analysis herein. See Dec. 61–72. Petitioner asserts that the American Peptide letter is admissible under the residual hearsay exception in FRE 807. MTE Opp. 3–5. We disagree. The American Peptide letter was submitted by the EPO opponent specifically for the purpose of opposing a foreign counterpart to the ’786 patent. We see no reason to distinguish it from the other materials previously excluded as hearsay in the Currie submission. Petitioner’s assertion that it contains sufficient guarantees of trustworthiness because it was “provided by a neutral third-party” (American Peptide) and “an individual having first- hand knowledge, [American Peptide Company’s] VP of sales and marketing” is speculation. See id. at 3–4. Based on the record before us, Patent Owner has never been afforded an opportunity to examine anyone regarding the statements in this letter or even confirm that it is, in fact, a letter from the American Peptide Company. The mere fact that it was submitted in a foreign patent proceeding does not make it any more trustworthy than any other untested assertion offered by an adverse party in a legal proceeding.” slip op. at 58

  Patent outcomesUS 7,041,786 not shown unpatentable
  § 103 obviousness
  Patents in suitUS 7,041,786
• MSN Laboratories Private Ltd. / MSN Pharmaceuticals Inc. v. Bausch Health Ireland LimitedNo claims unpatentable
  PTAB · Jan 27, 2026 · IPR2022-00722 · APJ Michael A Valek · IPR · Remand

  Claims 1–6 were not shown unpatentable because the unexpected results from the Glu3 substitution outweighed the prima facie obviousness showing; Patent Owner’s motion to exclude was granted.

  RulingsRemand decision

  • RemandOther

    “More specifically, the Federal Circuit identified “three reasons” why “the Board’s determination that the[se] experiments compared the claimed invention with the closest prior art lack[ed] adequate explanation” and instructed us to address these issues on remand. See CAFC Dec. 11–13. First, the Court stated we “should determine, based on the evidence put forward by the parties, whether plecanatide exhibits topoisomerism and whether the testing of the challenged claims should encompass both the active and inactive forms.” Id. at 12.3 Second, the Court instructed us to reconsider what the closest prior art compound is in view of Patent Owner’s “contention that highly pure A-form uroguanylin could be maintained as a lyophilized powder,” noting that “[i]f it is true . . . that uroguanylin can be maintained and therefore tested in its active A form as a lyophilized powder, that would support that the experiments [which were conducted in solution] did not use the closest prior art.” Id. Third, the Court observed that the Decision did not sufficiently address “whether the experiments submitted by [Patent Owner] actually used” the closest prior art and instructed the Board “to reevaluate the experimental evidence consistent” with the determinations noted above. Id. at 12–13.” slip op. at 3

  • Obviousness (§103) › Objective indicia / secondary considerationsObjective indicia outweighedDecided for patent owner

    “In sum, we find that there is a sufficient nexus between Patent Owner’s results and the challenged claims and that those results are reasonably commensurate with the same. Accordingly, for all of reasons explained above, the unexpected results Patent Owner relies upon are probative of non-obviousness. E. Conclusion for Ground 1 Weighing the record as a whole in view of the findings and analysis above as well as our findings and analysis relating to Petitioner’s prima facie showing in the Decision, we conclude that Petitioner has not met its burden to show that claim 1 would have been obvious over Currie and Li. The evidence suggesting that it would have been obvious to make the Glu3 substitution because it is a conservative substitution (see Dec. 20–38 (§ III.E.ii)) is substantially outweighed by Patent Owner’s comparatively strong evidence demonstrating unexpected results relating to improved interconversion stability, potency, and binding affinity from the Glu3 substitution. See Millennium Pharms., Inc. v. Sandoz Inc., 862 F.3d 1356, 1368 (Fed. Cir. 2017) (“Evidence of objective indicia [such as unexpected results] ‘can be the most probative evidence of nonobviousness in the record,’ and . . . enable[s] ‘the court to avert the trap of hindsight.’”) (quoting Leo Pharm. Prods., Ltd. v. Rea, 726 F.3d 1346, 1358 (Fed. Cir. 2013). Indeed, the interconversion and potency categories of Patent Owner’s unexpected results showing are particularly strong such that even without the additional results in Liu, we would still reach the same ultimate conclusion on obviousness. Accordingly, Petitioner has not shown by a preponderance of the evidence that claim 1 is unpatentable.” slip op. at 56

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundDecided for patent owner

    “same combination of Currie and Li for the limitations of claim 1 and the similar limitations recited in the other independent claims. In the Decision, we found that, based on the teachings in those references, an ordinarily-skilled artisan would have been motivated both to select human uroguanylin as a lead compound and modify its sequence by making a conservative Glu3 substitution for uroguanylin’s Asp3. Dec. 15–37. We did not, however, credit Petitioner’s other purported rationales for that modification. Id. at 34–37. Those findings were not disturbed on appeal. See CAFC Dec. 6–8 (rejecting 9 The Leahy-Smith America Invents Act, Pub. L. No. 112–29, 125 Stat. 284 (2011) (“AIA”), included revisions to 35 U.S.C. § 103 that became effective after the filing of the application that led to the ’786 patent. Therefore, we apply the pre-AIA version of 35 U.S.C. § 103. 10 U.S. Pat. 5,489,670, issued Feb. 6, 1996 (Ex. 1005) (“Currie”). 11 Z. Li et al., Purification, cDNA Sequence, and Tissue Distribution of Rat Uroguanylin, 68 Regulatory Peptides 45–56 (1997) (Ex. 1006) (“Li”). 12 R. Narayani et al., Polymer-coated Gelatin Capsules as Oral Delivery Devices and their Gastrointestinal Tract Behavior in Humans, 7 J. Biomater. Sci. Polymer Edn. 39–48 (1995) (Ex. 1007) (“Narayani”). 13 M. Campieri et al., Oral Budesonide is as Effective as Oral Prednisolone in Active Crohn’s Disease, 41 Gut 209–214 (1997) (Ex. 1008) (“Campieri”). 14 U.S. Pat. 5,359,030, issued Oct. 25, 1994 (Ex. 1009) (“Ekwuribe”). Patent Owner’s alternative arguments for affirmance). We incorporate by reference the portions of the Decision addressing Petitioner’s prima facie showing herein. See Dec. 8–37 (§§ III.A–D and E.i–ii). We consider the findings and explanation therein to the extent it bears on our analysis below.” slip op. at 10

  • ExcludeMotion to exclude, grantedGranted

    “motion. The American Peptide letter contains out of court statements from a third party submitted by the EPO opponent. The statements in the letter were not made under oath, nor is there evidence that Patent Owner was ever able to question the author of that letter or anyone else with personal knowledge of the statements therein. Petitioner argues that the American Peptide letter is evidence “to doubt that the ‘singular peak’ for uroguanylin in Liu represents the active topoisomer of uroguanylin” because it evidences that American Peptide “provided its customers with the ‘B’ (i.e., inactive) form of uroguanylin at the time.” Pet. Remand Resp. 25. That is, Petitioner relies on the American Peptide letter for the truth of the matters asserted therein. Such use plainly implicates the rule against hearsay and falls squarely within our prior reasoning for excluding the Currie submission portion of Exhibit 1067. We incorporate that analysis herein. See Dec. 61–72. Petitioner asserts that the American Peptide letter is admissible under the residual hearsay exception in FRE 807. MTE Opp. 3–5. We disagree. The American Peptide letter was submitted by the EPO opponent specifically for the purpose of opposing a foreign counterpart to the ’786 patent. We see no reason to distinguish it from the other materials previously excluded as hearsay in the Currie submission. Petitioner’s assertion that it contains sufficient guarantees of trustworthiness because it was “provided by a neutral third-party” (American Peptide) and “an individual having first- hand knowledge, [American Peptide Company’s] VP of sales and marketing” is speculation. See id. at 3–4. Based on the record before us, Patent Owner has never been afforded an opportunity to examine anyone regarding the statements in this letter or even confirm that it is, in fact, a letter from the American Peptide Company. The mere fact that it was submitted in a foreign patent proceeding does not make it any more trustworthy than any other untested assertion offered by an adverse party in a legal proceeding. For these reasons, we grant Patent Owner’s motion to exclude page 86 of Exhibit 1067.” slip op. at 58

  Patent outcomesUS 7,041,786 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 7,041,786

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.