• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision

  Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  Patent outcomesUS 11,581,322 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,581,322
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 23, 2025 · IPR2024-00790 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–3 are unpatentable as obvious over Kim; claims 4 and 5 were not shown unpatentable over the asserted grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “SuperGuide, 358 F.3d at 875 (“We review the patent’s written description and drawings to confirm that the patentee’s own use of the disputed term is consistent with the meaning given to it by the court.”). The ’031 patent teaches that dielectric pairs of different tiers are etched to form staircases extending along the x-y plane. Ex. 1001, 13:27–28. As described above (§ I.D, supra), dielectric filling structure 311 is formed by depositing a dielectric filling material to fill the space remaining after portions of dielectric stack 203 are removed to form staircase structure 303. Id. at 13:36–41; see also id. at 22:63–65 (“Memory structure 1200 can be formed by forming dielectric filling structure 1201 to fill the space formed by the removal of portions of dielectric stack 1003.”) The ’031 patent then teaches that excess dielectric filling material overlying the topmost surface of staircase structure 303 is removed using a suitable planarization method. Id. at 13:41–44; see also 22:67–23:5 (performing a planarization process to remove excess dielectric filling structure 1201 over the top surface of memory structure 1200). According to the ’031 patent, the portion of the deposited dielectric filling material that remains “over staircase structure 303 and isolation layer 109” forms “dielectric filling structure 311 that surrounds staircase structure 303.” Id. at 13:44–48 (emphasis added); see also id. at 1:56–58 (stating in “some embodiments, the memory device also includes a filling structure surrounding the multiple-stack staircase structure”). structure is etched along the x-, y-, and z-axes, and the dielectric filling structure fills the spaces in the x-, y-, and z-directions created when the staircase structure is etched. Because the excess portion of the dielectric filling structure overlying the top of the staircase structure is removed, what remains is dielectric filling structure in the spaces around the staircase structure in the x-, y-, and z-planes. In this way, the ’031 patent teaches that the dielectric filling structure surrounds, i.e., is all around or encircles, the staircase structure.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had “a bachelor of science degree in electrical engineering or a similar discipline” with “2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices,” or “an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 22–23. Petitioner further contends that a “POSITA would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. at 23 (citing Ex. 1003 ¶¶ 41–44). Patent Owner states that it does not object to the definition of a POSITA proffered by Petitioner. PO Resp. 13–14 (citing Pet. 22). In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’031 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableDecided for patent owner

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  Patent outcomesUS 10,868,031 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,868,031
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 22, 2025 · IPR2024-00794 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1 and 6 are unpatentable over Park; claims 2–5 and 7–11 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 19 (citing Ex. 1003 ¶¶ 36–37). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to this assessment, arguing that its claims are valid regardless of the precise definition. PO 3 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. skill, as it appears to be consistent with the specification of the ’623 patent and the prior art of record.” slip op. at 5

  • Expert testimonyPetitioner expert discountedMixed

    “the Petition, Petitioner’s approach to Shibata’s drive circuit and Park’s dummy channel/open region teachings results in a deficiency in its showing of reasonable expectation of success for its expressed combination of extending Park’s insulative trenches to replace some of its common source lines. Petitioner relies solely on the fact that the references are capable of performing the relied-upon functions or could possess the relied-upon structure. See, e.g., Pet. Reply 19–20 (stating, “If Shibata accommodates this type of trench . . . there is no reason Park cannot as well,” and “Park itself already presents a variety of ways to minimize any etching problem that may be encountered when using wet etching”). But Park does not describe its dummy channel or open region teachings as generally applicable to all of its embodiments. And Petitioner needs to show a reason why the application of Shibata would be reasonably expected to have been successfully applied in Park, not merely state that there is “no reason” to expect that it would not be successful. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018) (finding that even where two structures have “the same physical structure,” applying the teachings of one structure to the other requires “additional, reasoned analysis.”). The knowledge of one skilled in the art cannot bridge this gap, because these are inventive features of Park and Shibata. Furthermore, Petitioner also has not sufficiently explained, for any of its proposed augmentations, how metal gate deposition would occur sufficiently in the most remote regions of the long, parallel insulating layers in Petitioner’s Park-Shibata combination of such regions to avoid the risk of incomplete gate electrode layers in the final memory device that Patent Owner argues would result in a significant trade-off in memory device accuracy, and device scalability. PO Resp. 68 (citing Ex. 2010 ¶ 145). For example, Dr. Lee addresses only etching issues, not deposition issues. Ex. 1025, ¶¶ 32–47.” slip op. at 46

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We agree with Petitioner. As pointed out by Patent Owner, the “trenches formed in the BSG” language of claim 1 reflects specific description of the gate-first method of manufacturing, but not the gate-last method of manufacturing. Ex. 1001, 7:17–19 (“referring to Fig. 1A, one or more first dielectric trenches . . . are formed in the one or more BSGs”). However, as Petitioner points out, the claims are to a memory “device,” not to a method of manufacturing or a device produced by specific manufacturing steps. Pet. Reply 1. During prosecution of the application that matured into the ’623 patent, the Examiner determined that the device of claim 1 was distinct from a separately claimed method of manufacturing and The Examiner’s requirement stated that the memory device of claim 1 is not limited by the disclosed process of manufacture because “the process claims require . . . deposition steps of polysilicon whereas the product claims do not require any polysilicon.” Id. Applicant agreed “without traverse” with the Examiner’s determination and selected to pursue only the “device” claims. Id. at 596 (“Applicant elects, without traverse, Invention I, Claims 1–11, drawn to a device”).4 The distinctiveness is also supported by the discussion in the ’623 patent of “formed in the BSG” that describes its device separately from its method of formation. The ’623 patent describes that “[i]n the disclosed memory device, one or more first dielectric trenches are formed in the BSG and extend in a length direction of the substrate to separate the BSG into a plurality of sub-BSGs.” Ex. 1001, 2:25–28. This description precedes, and is separate from, its description of an aspect of a process for manufacturing a memory device in which the BSG layer is formed and then “dielectric trenches are formed” that may “pass through the BSG layer” so that the “BSG layer is separated by the one or more first dielectric trenches into a plurality of sub-BSG layers.” Id. at 3:30–45. The description of the device having trenches formed in the BSG, which is not limited to a particular manufacturing process, further supports Petitioner’s contention that the “formed in the BSG” language is not limited to a particular manufacturing embodiment.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner

    “We do not agree that such arguments support Patent Owner’s conclusion. Patent Owner acknowledges that two portions of a BSG that are connected at a small opening are not separated because both portions remain electrically connected to each other. Id. at 17 (stating, “common source regions 52a is merely in the middle of a single sub-BSG 2 (‘SUB-BLK2’) and does not divide it into further sub-BSGs because there is an H-cut 72 that connects the two sides of the common source region such that both regions are part of the same sub-BSG”) (citing Ex. 1001, 9:15–19, 9:41–44) (emphasis omitted); Ex. 1026, 34:4–15, 41:23–42:16 (Dr. Kuhn attesting that common source regions may isolate adjacent BSGs). Patent Owner considers other portions of the BSG to be separated into sub-BSGs because there is no such connection between the sub-BSG portions. Id. at 17–18 (annotating Ex. 1001, Fig. 1B). Under such reasoning, the addition of a trench closing a gap between two neighboring BSG portions, thereby breaking the electrical connection therebetween, would “separate” the two BSG portions into further sub-BSGs. In its obviousness assertions, Petitioner argues for such an interpretation of the claim. See Pet. Reply 10 (“Park’s layers 111 electrically separate its BSG”). Based on the above, we determine that the phrase “dielectric trenches formed in the BSG and extending in a length direction of the substrate to perform electrical separation between sub-BSGs, but does not require that the trenches act alone, extending from one end of the device to the other across the entire BSG. Similarly, the trenches need not have any particular length, and need only to have some length that performs that separation.” slip op. at 13

  Patent outcomesUS 10,950,623 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,950,623
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.All claims unpatentable
  PTAB · Oct 7, 2025 · IPR2024-00795 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1–9 and 11–19 are unpatentable as obvious over Lee or Zhao and Lee; the Board did not find claims unpatentable over Zhao or Yang alone.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND memory devices (including issues relating to the operation, e.g., programming, of said devices), or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience). Pet. 18 (citing Ex. 1003 ¶¶ 35–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about NAND memory’s structure, its component parts, how it operates, and how it is controlled. Id. (citing Ex. 1003 ¶ 38). Patent Owner does not object to this assertion. PO Resp. 12. We adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’822 patent and the prior art of record.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “1. Word line pre-pulse signal Patent Owner argues that such a signal “must increase in value and then decrease in value (or vice versa).” PO Resp. 13; PO Sur-Reply 1. Petitioner agrees with this construction. Pet. Reply. 3. Patent Owner further argues that the pre-pulse signal “prepares the word line before the programming step.” PO Resp. 13. We agree that Petitioner applies its teachings with the same understanding of “pre-pulse signal” as Patent Owner. See, e.g., Pet. 38–39 (asserting that Lee teaches, or that that Lee would make obvious, pre-bias signals applied as pulses). Because both parties agree that a pre-pulse signal “must increase in value and then decrease in value (or vice versa),” and apply this construction in their assertions and arguments, no dispute as to the meaning of this phrase exists in a manner that would affect the outcome of this decision. Therefore, we do not need to determine a particular construction. Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (“[W]e need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci & Eng'g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “with the plain language of the claims, each claim states “disposed.” Patent Owner provides dictionary definitions for “disposed,” which is described as a verb. See, e.g., Ex. 2016, 3. When described as a verb in these definitions, “disposed” is the action of the actor; i.e., “the chief disposed his attendants in a circle” (Ex. 2019, 3); “She disposed of her estate among her heirs” (Ex. 2018, 3); “disposed of the matter efficiently” (Ex. 2017, 3); “troops disposed for withdrawal” (Ex. 2016, 3). Petitioner offers no contrary definition from either the Specification or any extrinsic source for that term. We agree with Patent Owner’s construction of “disposed” as “put in place” or “arranged in a particular position.” Nevertheless, the construction of “disposed” does not resolve the controversy over the language of claims 2, 3, 12, and 13. The claims recite “are disposed.” For example, claim 2 recites, “wherein the [first through third groups] of the plurality of word lines are disposed in an order of distance from the selected word line.” Under Patent Owner’s construction, this reads as, “wherein the [first through third groups] of the plurality of word lines are arranged in a particular position in an order of distance from the selected word line.” But claim 2 does not recite that the word lines are arranged “based on” the selected word line, or that the arrangement occurs only after a word line is selected, as argued by Patent Owner. We agree with Petitioner that the express language of claim 2 does not recite any limitation as to how or when the groups of word lines are disposed. Both parties point to the same language in the ’822 patent Specification in support of their position: “the word lines disposed between the selected word line and the top select gate TSG can be divided into multiple groups of the word lines.” PO Sur-Reply 2 (citing Pet. Reply 11 requires the recited arrangement to exist, at some point. But we determine that none of claims 2, 3, 12, or 13 require a step of arrangement, or an action to change the arrangement of grouped word lines.” slip op. at 9

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundUnpatentableUnpatentable

    “not based on the location of the source or bit lines. Instead, Petitioner relies upon the distance from the selected word line and the drain-side of the string. See Pet. 66 (“the channel length between the drain-side of the string and word line selected for programming would be quite long, resulting in a relatively high channel resistance” (citing Ex. 1003 ¶ 360)). Petitioner asserts that Lee’s application of higher pre-charge voltages to the drain-side word lines “offset the channel resistance effect.” Id. (citing Ex. 1003 ¶ 361). Lee and Zhao both admittedly have “typical memory strings, which are a ‘vertical column’ of memory cells arranged in series between a source side select transistor and a drain side transistor.” PO Resp. 53 (emphasis omitted). Petitioner asserts that applying pre-charging to mitigate program disturb (sought by both Lee and Zhao) relies on the creation of a potential difference to facilitate electron redistribution. Pet. Reply 17–18 (citing Ex. 1004, 1:52–56; Ex. 1005, 17:4–12; Ex. 1021 ¶¶ 72–78). Petitioner asserts that the application of voltage can be performed from either end of the channel so long as it targets the portion of the channel desired to be pre- charged. Id. at 18 (citing Ex. 1021 ¶¶ 77–78; Ex. 1010, 17:16–23). Although Patent Owner points to Yang as showing different “biasing schemes” based upon whether the bit line, source line, or both are used for pre-charging, each of the cited Figures 8–10 of Yang indicates that Vbypass (Yang’s uncontested pre-pulse signal) is applied to at least some word lines between the selected word line and the drain-side SGD0. Ex. 1010, Figs. 8C, 9C, 10C; see PO Resp. 25–28 (“a ‘bypass voltage’ (‘Vbypass’) is applied to ‘not yet programmed’ memory cells during the ‘pre-charge phase’” (citing Fig. 8C) (emphasis omitted)). We do not discern in Patent Owner’s arguments, or in the evidence provided during trial, sufficient reasons why applying voltage from either source or bit line disturbs Petitioner’s asserted advantage of offsetting the resistance of the channel between a selected word line and the drain side of the string. Patent Owner further argues that Lee discusses a “wholly disparate approach” for mitigating program disturb than Zhao and that a POSITA would not have been motivated to apply Lee’s teaching to Zhao. PO Resp. 56–58. Patent Owner contends that because Zhao does not conduct current when applying its bypass voltage to equalize charges, but Lee does conduct current when doing so, Lee need only compensate for insufficient charge boosting due to the increased resistance component between source and drain and does not need to compensate for “resistance” effects creating voltage differences along the length of the memory string channel. Id. at 56. Dr. Przybylski’s supporting testimony is based upon such differences in the resistance components. See, e.g., Ex. 2011 ¶ 128. However, we have credited Dr. Liu’s testimony that a chain of transistors in both systems creates a resistance effect regardless of current flow in the steady state. Supra § II.F.1.b.2. We further agree with Petitioner that applying pre- on the creation of a potential difference to facilitate electron redistribution. Pet. Reply 17–18 (citing Ex. 1004, 1:52–56; Ex. 1005, 17:4–12; Ex. 1021 ¶¶ 72–78). We further credit Dr. Liu’s testimony that Zhao’s use of the same pre-charge voltages to not-yet-programmed word lines presents an issue of inadequate pre-charging that Lee addresses. Ex. 1021 ¶¶ 55–56; Pet. Reply 22–23. Consequently, we are persuaded by Petitioner that the chain resistance effects in Zhao and Lee permit the application of Lee’s method of pre-charging to mitigate program disturb to be applicable and desirable in Zhao’s method of applying pre-charging to mitigate program disturb. Consequently, we determine that Petitioner has shown persuasive motivation for its combination.” slip op. at 45

  Patent outcomesUS 11,501,822 unpatentable
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 11,501,822
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Instituted
  PTAB · Jul 25, 2025 · IPR2025-00191 · APJ Michael T Cygan · IPR · Institution

  The Board instituted review on all challenged grounds for non-disclaimed claims 3, 6, 8–20; it found a reasonable likelihood of success for claims 8–12 and 19.

  RulingsInstitution decision

  • PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted

    “review. See 35 U.S.C. § 314; 37 C.F.R. § 42.4(a). The standard for instituting an inter partes review is set forth in 35 U.S.C. § 314(a), which provides that an inter partes review may not be instituted “unless . . . there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” For the reasons discussed below, we determine that Petitioner has sufficiently shown a reasonable likelihood that it will prevail as to the unpatentability of claims 8–12 and 19 of the ’322 patent but has not sufficiently shown a reasonable likelihood that it will prevail as to the unpatentability as to claims 3, 6, 13–17, and 20. Because Petitioner has sufficiently shown a reasonable likelihood that at” slip op. at 2

  • Adverse judgmentAdverse judgmentOther

    “B. Patent Owner’s Disclaimer of Claims 1, 2, 4, 5, and 7 As indicated above, Patent Owner filed a statutory disclaimer of claims 1, 2, 4, 5, and 7 of the ’322 patent. See Ex. 2006. In view of Patent Owner’s statutory disclaimer, we treat claims 1, 2, 4, 5, and 7 as having never been part of the ’322 patent. See Vectra Fitness, Inc. v. TNWK Corp., 162 F.3d 1379, 1383 (Fed. Cir. 1998) (“This court has interpreted the term ‘considered as part of the original patent’ in [35 U.S.C.] § 253 to mean that the patent is treated as though the disclaimed claims never existed.”). Because inter partes review cannot be instituted based on disclaimed claims, claims 1, 2, 4, 5, and 7 are outside the scope of this proceeding. 37 C.F.R. § 42.107(e) (“No inter partes review will be instituted based on disclaimed claims.”); General Elec. Co. v. United Techs. Corp., IPR2017- 00491, Paper 9 (PTAB July 6, 2017) (precedential) (denying institution in view of a statutory disclaimer of all the challenged claims). Thus, we confine our analysis in this Decision to claims 3, 6, and 8–20, the challenged claims that have not been disclaimed.” slip op. at 3

  • Other 314aDenied

    “Patent Owner filed a Brief on Discretionary Denial, and Petitioner filed a brief in opposition. Papers 10 and 18. The Director considered the briefing and determined that discretionary denial was not warranted. Paper 21.” slip op. at 2

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶ 34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does not provide any such assessment in its Preliminary Response. Prelim. Resp. 8; Ex. 2007 ¶ 22 (reserving the right to opine as to an alternative level of a POSITA). For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 8

  Claim construction§ 103 obviousnessDiscretionary denialcites KSR · Graham
  Patents in suitUS 11,581,322
• Intel Corporation v. Besang Inc.No claims unpatentable
  PTAB · Dec 11, 2024 · IPR2023-00991 · APJ Jon B Tornquist · IPR · Final written decision

  The Board held claims 1 and 13–17 not unpatentable, finding the asserted obviousness grounds deficient in claim limitations or motivation to combine.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “The parties proposed definitions differ in that Petitioner would permit a degree in “materials science” and require three years, as opposed to two years, of relevant experience. Compare Pet. 9 with PO Resp. 14. On this record, we adopt Patent Owner’s proposed definition, as it is more consistent with the prior art of record and the disclosures of the ’702 patent. We note, however, that neither party contends that the outcome of this case depends on the slight differences in the proposed definitions of a person of ordinary skill in the art.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “1996) (“It is well-settled that, in interpreting an asserted claim, the court should look first to the intrinsic evidence of record, i.e., the patent itself, including the claims, the specification and, if in evidence, the prosecution history.”). Upon review of the parties’ arguments and the intrinsic record, we agree with Petitioner that the ’702 patent does not support a construction of “stackable add-on layer” that encompasses memory cells formed by sequential deposition on a substrate without being formed and then added to a separately formed substrate. Pet. 11–12. First, the plain language of the claim does not require merely a “layer” having a plurality of vertically oriented semiconductor memory cells, but rather “a stackable add-on layer” having a plurality of vertically oriented semiconductor memory cells; that plurality is bonded to the dielectric layer. Ex. 1001, 12:29–32. A construction that gives meaning to all words of the claim is preferred. Merck & Co., Inc. v. Teva Pharm. USA, Inc., 395 F.3d 1364, 1372 (Fed. Cir. 2005) (“A claim construction that gives meaning to all the terms of the claim is preferred over one that does not do so.”).” slip op. at 12

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “As discussed above, we do not understand a “stackable add-on layer” to include memory cells that are formed by sequential deposition on or above a substrate without being added to a separately formed substrate. It is undisputed, and indeed it is Petitioner’s assertion, that Lee’s memory devices are formed by sequential deposition. Pet. 16, 29 n.11, 51 (“In Lee, each level 3104 is deposited on the underlying level of array 3101.”). Therefore, Petitioner has not shown that Lee discloses every limitation of independent claim 13 under our claim construction. Thus, Petitioner does not demonstrate by a preponderance of the evidence that claim 13 would have been obvious in view of Lee. 3. Analysis: Claims 14–17 Claims 14–17 each depend, directly or indirectly, from claim 13. Petitioner’s arguments with respect to these claims do not remedy the deficiencies noted above with respect to claim 13. Pet. 31–41. Accordingly, Petitioner does not demonstrate by a preponderance of the evidence that claims 14–17 would have been obvious over Lee.” slip op. at 19

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentableNot shown unpatentable

    “We agree with Patent Owner that Petitioner has not demonstrated that Aspar would improve Lee, would solve a problem in Lee, and that Petitioner is proposing to use Aspar in a way that is not disclosed in the reference. PO Resp. 49–50 (citing Ex. 2029 ¶¶ 153–162); Tr. 57:24–58:12; Pet. 61; KSR, 550 U.S. at 417 (asking whether a technique “would improve similar devices in the same way”), 420 (asking whether there was a known problem in the art), 421 (asking whether one of ordinary skill in the art had reason to “pursue the known options”); Intel, 61 F.4th at 1381 (explaining that obviousness may be demonstrated by showing that there was a known problem in the art (“cache coherency in multiprocessor systems”) and that a person of ordinary skill in the art would recognize that that the prior art solution to this problem (“global segmented secondary cache”) would improve the system of another prior art reference). Petitioner does not persuasively show that there was any known problem in the art with respect to Lee or its monolithic method of constructing memory arrays. Nor does Petitioner provide persuasive argument or evidence that Aspar’s wafer bonding would improve Lee’s memory device.10 For example, Petitioner states in a conclusory fashion that Aspar would address the known problem of “fabricating 3D structures,” but does not explain what those problems were or why Lee fails to solve them. Pet. 61. Dr. Sechen’s testimony merely parrots the Petition, providing no further analysis or explanation of what problem might exist in Lee when fabricating its 3D structures. Ex. 1003 ¶ 212. The Petition notes that Aspar transfers “thin layers of very good thickness homogeneity and with a high crystalline quality,” but the Petition never asserts that Lee’s direct deposition method fails to provide these same or similar qualities. Pet. 60–61.” slip op. at 27

  Patent outcomesUS 7,378,702 not shown unpatentable
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,378,702
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Home Depot U.S.A., Inc. v. Lynk Labs, Inc.All claims unpatentable
  PTAB · May 22, 2023 · PGR2022-00009 · APJ Monica S Ullagaddi · PGR · Final written decision

  Claims 1–5, 7–12, and 14–19 are unpatentable based on lack of written description, anticipation by Bruning, or obviousness over Bruning and Kabel.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “lighting device.” Accordingly, we determine that the level of ordinary skill in the art is “a bachelor’s degree in electrical engineering, or similar technical field, with two years of relevant experience in the field of design and/or development of LEDs and circuits,” as Petitioner proposes and that “the field of design and/or development” would be “in the context of lighting devices” as Patent Owner proposes, in which “[a]n increase in experience could compensate for less education.” Id.; Pet. 24 (citing Ex. 1002 ¶ 46).” slip op. at 15

  • Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner

    “theoretically fall under the “or greater” portion of the amended claim limitation “forward voltage of 6V or greater,” Applicant distinguished Colby on the basis that the 120V AC voltage from a wall outlet is not “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs.” See Ex. 1023, 9 (emphasis added). Applicant’s argument specifically identifies the claim language at issue––“forward voltage of 6V or greater”––and specifically states that it is not disclosed because Colby does not disclose the minimum voltage and instead, discloses something else, something larger–– 120V AC voltage. Accordingly, we conclude that Applicant disclaimed any voltage that is more than “the minimum voltage difference required between the anode and cathode of the LEDs in the claimed circuit to allow current to flow through the LEDs” from the scope of “forward voltage.”” slip op. at 25

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateUnpatentable

    “4. 35 U.S.C. § 112(a) With respect to the written description requirement, we are persuaded” slip op. at 32

  • Disclosure Requirements (§112) › Enablement (Wands, Amgen full scope)Not enabledUnpatentable

    “Basis § Unpatentable Unpatentable Lack of written description, 3, 10, 17 112(a) 3, 10, 17 Lack of enablement 3, 10, 17 112(b) Indefiniteness 3, 10, 17 Lack of written description, 4, 11, 18 112(a) 4, 11, 18 Lack of enablement 4, 11, 18 112(b) indefiniteness 4, 11, 18” slip op. at 77

  Patent outcomesUS 10,932,341 unpatentable
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham · Nautilus
  Patents in suitUS 10,932,341
• Samsung Electronics Co., Ltd. v. Lynk Labs, Inc.Some claims unpatentable
  PTAB · May 5, 2023 · IPR2022-00098 · APJ Arthur M Peslak · IPR · Final written decision

  Claims 1, 3, and 4 are unpatentable as obvious over the stated combinations; claim 2 was not shown unpatentable because the driver was not shown configured to receive the rectifier’s forward voltages.

  RulingsFinal written decision

  • Skill levelSkill level patent owner adoptedDecided for patent owner

    “We agree with Patent Owner that a person of ordinary skill in the art would have had experience in LED devices. For this reason, we apply Patent Owner’s proposed level of ordinary skill in the art because it comports with the level of skill reflected in the ’149 patent and the prior art of record. However, if we were to apply Petitioner’s proposed level of skill, our Decision would not be affected.” slip op. at 9

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Upon review of the entire record, we determine that no claim terms require express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (noting that “we need only construe terms ‘that are in controversy, and only to the extent necessary to resolve the controversy’”) (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 10

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “Dr. Ducharme’s testimony that “the spacing of the chips in Zhang would not likely be so close as to create overheating issues” (Ex. 2002 ¶ 111) is unsupported by any disclosure of the actual spacing of Zhang’s chips. Consequently, his testimony that there would be no overheating concerns in Zhang due to the spacing of the chips is entitled to little, if any, weight. Dr. Ducharme further testifies that the components of Zhang’s driver “could easily increase the temperature of the LED 19 chips on the circuit board, which can cause LEDs to generate less illumination, burn out and otherwise adversely affect their performance.” Ex. 2002 ¶ 126. Dr. Ducharme further testifies that “[i]t is well-known that excessive operational temperatures can reduce the illumination provided by the LEDs, can decrease the operational lifetime of the LEDs, and if the temperature is sufficiently high, it can cause LED junction failure and a burnt-out LED.” Id. We agree with this testimony, which as discussed below, is consistent with Salam. Dr. Ducharme’s testimony concerning overheating issues caused by the driver components contradicts Patent Owner’s ’s contention that there would not be “an overheating issue with Zhang’s LED exit sign circuit in Figure 2.1.” PO Resp. 30. Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106). Patent Owner next contends it would be extremely burdensome and costly to modify Zhang to add a heat sink layer because “each of the multiple chips mounted and epoxied to Zhang’s circuit board in the exit sign would have to be modified.” PO Resp. 30 (citing Ex. 2002 ¶ 112). Dr. Ducharme’s testimony repeats the Patent Owner Response verbatim and is entitled to little, if any, weight. Ex. 2002 ¶ 112. Nonetheless, this contention is unavailing because it is based on Patent Owner’s bodily incorporation of Zhang and Salam. Patent Owner next contends that a person of ordinary skill in the art” slip op. at 27

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable

    “Regardless of whether Zhang’s LEDs in Figure 2.1 have a heat problem or not, Salam teaches the advantages of using a heat sink. Salam teaches that a heat sink will result in a higher efficiency of the LEDs and improved life. Ex. 1006, 16:38–43. The Federal Circuit, in DyStar Textilfarben GmBH & Co v. C.H. Patrick Co., 464 F.3d 1356 (Fed. Cir. 2006), stated that “the desire to enhance commercial opportunities by improving a product or process is universal–and even common-sensical . . . the proper question is whether the ordinary artisan possesses the knowledge and skills rendering him capable of combining the prior art references.” Id. at 1368. Dr. Ducharme testified that a person of ordinary skill in the art “would have an understanding of the generation of heat and using a heat sink to remove unwanted heat from electronics and LED lighting devices.” Ex. 1102, 23:18–24:3. Dr. Ducharme’s testimony is consistent with Petitioner’s contention that the combination of Zhang and Salam “would have been a straightforward combination of known components and technologies, according to known methods, to produce the predictable result of reducing/ mitigating heat effects in a circuit.” Pet. 17 (citing Ex. 1002 ¶ 106).” slip op. at 27

  Patent outcomesUS 10,517,149 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,517,149
• Alcon Inc. / Alcon Vision, LLC et al. v. Amo Development, LLCNo claims unpatentable
  PTAB · Dec 12, 2022 · IPR2021-00862 · APJ Sheridan K Snedden · IPR · Final written decision

  Claims 1–24 were not shown unpatentable because Petitioner failed to establish the proposed prior-art combinations and the required motivation to combine with a reasonable expectation of success.

  RulingsFinal written decision

  • Skill levelSkill level board ownDecided for patent owner

    “The parties present compelling argument and evidence that one of ordinary skill in the art would include those with experience in ophthalmology, as well as in the research, manufacture, and design of medical optics or medical lasers. Pet. 25; PO Resp. 9–10. The evidence of record also demonstrates that few individuals actually had such comprehensive experience. Rather, teams of individuals with different expertise and various academic degrees (Ph.D.s, B.S.s, and M.D.s) would work together to design laser surgery systems intended to make incisions in the lens of the eye. See, e.g., Ex. 1041 (several authors are M.D.s); Ex. 1042 (the authors’ degrees include Ph.D.s, an M.D., and a B.S.); see also Ex. 1053; Ex. 1054; Ex. 1055; Ex. 2010; Ex. 2019. Thus, we find that the person of ordinary skill in the art would have been either an ophthalmic surgeon or someone with a Ph.D., M.S., or B.S. degree in physics, biomedical engineering, or a related science such as nuclear engineering, having experience in researching, manufacturing, or designing medical optics or medical lasers (e.g., five years of experience for a Ph.D. or more to compensate for lesser degrees), and that such persons would have worked in collaboration with one another to fill any necessary gaps in knowledge (e.g., the engineer would consult the medical doctor on clinical issues or physiology and the medical doctor would consult the engineer on technical issues). This definition marries the two proposed by the parties.” slip op. at 11

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “Petitioner does not assert that any claim term requires express construction. See Pet. 6 (stating that it “reserves the right to respond to any constructions that [Patent Owner] submits”). Patent Owner does not present any remarks regarding claim construction. See generally PO Resp. On this record, we determine that no claim terms require express construction because it is not essential to our conclusions on patentability. See Nidec Motor., 868 F.3d at 1017 (quoting Vivid Techs., 200 F.3d at 803 (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)). To the extent further discussion of the meaning of any claim term is necessary to our decision, we provide that discussion below in our analysis of the asserted grounds of unpatentability.” slip op. at 13

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundReasonable expectation not foundNot shown unpatentable

    “summarized above, we find that the evidence of record does not support a conclusion that it would have been simple, straightforward, or otherwise routine to convert Swinger’s manual HeNe aiming system and Swinger’s surgeon-identification-of-target-tissue step to a computer-controlled, OCT-guided laser system. Even assuming that a person of ordinary skill in the art would have combined the teachings of Swinger and Baikoff to achieve a laser surgical system incorporating an OCT imaging system, that combination still would not have achieved the required “computer system” of the claims and all of its programmed surgical functionality, particularly, using a computer system to construct an anterior capsulotomy cutting region based on the image data. Petitioner relies on the ability of a person of ordinary skill in the art to configure Swinger’s computer control unit with the missing functionality, thus necessitating an electronic conversion of the steps performed using Swinger’s direct visualization method using a HeNe aiming beam to manually identify a surgical treatment region for laser surgery. Ex. 1039, 34:52–57; Ex. 2088 ¶¶ 55–59, 66. That conversion, however, involves the incorporation of OCT imaging technology as the basis for a computer-controlled system to plan and then implement the planned cataract surgery, two technological leaps that the record fails to show were known or suggested. In particular, the evidence of record does not support a conclusion that OCT was a well-known system used routinely, if at all, in the identification of treatment regions in the lens or lens capsule for cataract surgery, and further does not support a conclusion that a computer-controlled system to plan and to implement a planned cataract surgery in the lens was commonplace or even considered before the invention.” slip op. at 25

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightMotivation not foundNot shown unpatentableNot shown unpatentable

    “The evidence of record demonstrates, however, that modifying an existing corneal surgery system to image and perform surgery on the lens was not the simple task asserted by Petitioner. For example, in a patent application filed in November 2009, Petitioner asserted that due to the different depth ranges for the laser’s focus, “laser systems designed for corneal procedures do not offer solution[s] for the considerable challenges of performing surgery on the lens of the eye.” Ex. 2007, 4:65–67, 5:30–36, code (22). Similarly, in a different patent filed in December 2008, Petitioner outlined the various challenges in developing laser surgery systems for creating incisions in the lens, including the difficulty in focusing a laser beam that propagates through regions of the eye with different optical properties and different curvatures. Ex. 2014, 15:51–16:18, code (22). This patent then states: Because of all the described hard challenges, corneal surgical laser systems are qualitatively simpler than lens surgical lasers. This is well supported by the fact that even though corneal surgical systems were suggested about 40 years ago, none have been adapted successfully for lens surgery to date. Id. at 16:13–18. During prosecution of another patent filed in 2008, and in responses to office actions filed in 2012 and 2013, Petitioner argued that a corneal OCT system “simply will not work” on the lens and that it would not have been obvious to modify such an OCT system to image the lens. Ex. 2015, 898, 1591, 1788. This was because OCT systems designed to image the lens would be required to deliver and scan an imaging beam “to a depth ten times bigger and a depth range ten times bigger” than an OCT system designed to image the cornea. Id. at 1591. According to Petitioner, “it is not obvious” to modify an OCT imaging system to achieve a depth and scanning range that is ten times larger than that disclosed in the art. Id. at 898 (“Increasing a system’s performance by an order of magnitude cannot be regarded as obvious.”), 1590–1591. Petitioner’s arguments presented in its own patents and during their” slip op. at 39

  Patent outcomesUS 8,709,001 not shown unpatentable
  Claim construction§ 103 obviousness
  Patents in suitUS 8,709,001

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.