• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Jul 6, 2026 · IPR2025-00191 · APJ Michael T Cygan · IPR · Final written decision

  Claims 3, 8, 11, 12, and 19 are unpatentable under §103; Petitioner did not show claims 6, 9, 10, 13–18, and 20 unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “at the critical time “would have had a Bachelor of Science degree in electrical engineering or a similar discipline, along with 2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 27 (citing Ex. 1003 ¶¶34–38). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, how it is manufactured, and its component parts.” Id. Patent Owner does 5 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. Pet. 100; PO. Resp. circuit design. PO Resp. 9–10 (citing Ex. 2021 ¶ 35). Neither Patent Owner nor Dr. Campbell considers the obviousness of the claims to turn on the precise definition of the level or ordinary skill in the art. PO Resp. 10; Ex. 2021 ¶ 35. For purposes of this Decision, we adopt Petitioner’s proposed level of ordinary skill, as it appears to be consistent with the specification of the ’322 patent and the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for petitioner

    “C. Claim Construction Neither party proposes any express claim construction. Pet. 27 (stating claims should receive their “plain and ordinary meaning”); PO Resp. 10 (stating that Petitioner’s challenges fail “under any reasonable construction”). In an inter partes review, we construe a patent claim “using the same claim construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b).” 37 C.F.R. § 42.100(b). Under this standard, the words of a claim generally are given their “ordinary and customary meaning,” which is the meaning the term would have to a person of ordinary skill at the time of the invention, in the context of the entire patent including the specification. Phillips v. AWH Corp., 415 F.3d 1303, 1312–13 (Fed. Cir. 2005) (en banc). We determine no terms require express construction for purposes of this Decision.” slip op. at 8

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner

    “We determine that such a configuration would be neither inoperable nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedMixed

    “nor significantly undesirable. Dr. Campbell testified that he does not argue that this configuration would be inoperable. Ex. 1106, 74:12–17; Ex. 2021 ¶60. Dr. Lee testifies that this configuration is “consistent with Nishikawa[123]’s Figure 14B.” Ex. 1105 ¶ 13. Dr. Lee further testifies that this configuration would not necessarily require a larger footprint, but instead, “could simply replace the trenches, abutting the device edge.” Id. Dr. Campbell testified that if the circular TAC replaced the rectangular trench, “I don’t know what it would be or exactly where it would be,” and therefore, “I can’t say what the size of the red circle would have to be.” Ex. 1106, 83:19–84:3. Therefore, the record does not support finding a circular TAC to have a larger footprint. Absent a larger footprint, there is no evidence that the end-connected TAC would be undesirable.” slip op. at 15

  Patent outcomesUS 11,581,322 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 11,581,322
• Allstate Insurance Company v. Atos, LLCSome claims unpatentable
  PTAB · Jan 30, 2026 · IPR2021-01449 · APJ Jon M Jurgovan · IPR · Remand

  Claims 3–5 are unpatentable; claims 1 and 2 are not shown unpatentable. Claims 3 and 4 are obvious over the applied grounds under the remand construction of “movement vector.”

  RulingsRemand decision

  • RemandOther

    “was incorrect, vacated the Final Written Decision as to claims 3 and 4, and remanded the case to the Board to determine the ordinary and customary meaning of “movement vector” and decide the outcome for claims 3 and 4 in accordance with that meaning. Atos, LLC v. Allstate Insurance Company, 2025 WL 1482404, at *5 (Fed. Cir. May 23, 2025); Paper 35 (“Federal Circuit Remand,” “Remand,” or “Fed. Cir. Remand”). Pursuant to the Federal Circuit’s instructions, the Board authorized the” slip op. at 3

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for patent owner

    “considered individually and together, have well-understood, common meanings to ordinarily skilled artisans as of the invention date, reflected by the ’174 patent’s specification and other evidence of record noted above. Accordingly, we determine that the ordinary and customary meaning of “movement vector” is “a vector indicating movement of an object.” 3) “operation indicator” Petitioner” slip op. at 20

  • Obviousness (§103) › Graham factors (scope of art, differences, level of skill)Not shown unpatentableNot shown unpatentable

    “Dr. Kanellakopoulos’s explanation that angular momentum is not inherent to an object, and its computation requires an arbitrary choice of a point of origin that has no physical meaning in the context of vehicle motion, also supports Patent Owner’s position. Id. ¶ 71 (citing Ex. 2004, 262). Accordingly, Patent Owner’s argument, that angular momentum cannot be used to detect a vehicle turning, is persuasive. Id. We also find persuasive, as Dr. Kanellakopoulos explains, that Petitioner’s argument regarding the figure on Kleppner 234 is based on misinterpretation of the vectors in that figure. Id. ¶ 67 (explaining that Kleppner 233–234 does not depict a gravity vector).” slip op. at 35

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable

    “Kleppner does not disclose a rotation vector, a person of ordinary skill would have used the knowledge of a rotation vector (because it is a term of art) alongside Kleppner’s teaching, to arrive at claim 1. See Pet. Reply 11. This argument does not satisfy Petitioner’s burden to provide articulated reasoning with some rational underpinning to support the conclusion of obviousness. See KSR, 550 U.S. at 419 (citing In re Kahn, 441 F.3d 977, 988 (Fed. Cir. 2006)). Petitioner does not explain which teaching of Kleppner a person of ordinary skill would have selected and combined with their knowledge of a rotation vector to yield the method of claim 1, or explain why a person of ordinary skill would have recognized based on Kleppner that estimating the angle between a rotation vector and gravity vector could be used to detect a vehicle turning. Nor does Petitioner respond to Patent Owner’s assertion that Kleppner provides no rationale for estimating an angle of alignment between a rotation vector and gravity vector as a way of detecting a vehicle turning. See Ex. 2001 ¶ 65.” slip op. at 35

  Patent outcomesUS 9,846,174 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 9,846,174
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 23, 2025 · IPR2024-00790 · APJ Jo-Anne M Kokoski · IPR · Final written decision

  Claims 1–3 are unpatentable as obvious over Kim; claims 4 and 5 were not shown unpatentable over the asserted grounds.

  RulingsFinal written decision

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner

    “SuperGuide, 358 F.3d at 875 (“We review the patent’s written description and drawings to confirm that the patentee’s own use of the disputed term is consistent with the meaning given to it by the court.”). The ’031 patent teaches that dielectric pairs of different tiers are etched to form staircases extending along the x-y plane. Ex. 1001, 13:27–28. As described above (§ I.D, supra), dielectric filling structure 311 is formed by depositing a dielectric filling material to fill the space remaining after portions of dielectric stack 203 are removed to form staircase structure 303. Id. at 13:36–41; see also id. at 22:63–65 (“Memory structure 1200 can be formed by forming dielectric filling structure 1201 to fill the space formed by the removal of portions of dielectric stack 1003.”) The ’031 patent then teaches that excess dielectric filling material overlying the topmost surface of staircase structure 303 is removed using a suitable planarization method. Id. at 13:41–44; see also 22:67–23:5 (performing a planarization process to remove excess dielectric filling structure 1201 over the top surface of memory structure 1200). According to the ’031 patent, the portion of the deposited dielectric filling material that remains “over staircase structure 303 and isolation layer 109” forms “dielectric filling structure 311 that surrounds staircase structure 303.” Id. at 13:44–48 (emphasis added); see also id. at 1:56–58 (stating in “some embodiments, the memory device also includes a filling structure surrounding the multiple-stack staircase structure”). structure is etched along the x-, y-, and z-axes, and the dielectric filling structure fills the spaces in the x-, y-, and z-directions created when the staircase structure is etched. Because the excess portion of the dielectric filling structure overlying the top of the staircase structure is removed, what remains is dielectric filling structure in the spaces around the staircase structure in the x-, y-, and z-planes. In this way, the ’031 patent teaches that the dielectric filling structure surrounds, i.e., is all around or encircles, the staircase structure.” slip op. at 11

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “(“POSITA”) would have had “a bachelor of science degree in electrical engineering or a similar discipline” with “2–3 years of professional experience working with (e.g., researching, designing, or teaching) monolithic 3D structures and NAND memory devices,” or “an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 22–23. Petitioner further contends that a “POSITA would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. at 23 (citing Ex. 1003 ¶¶ 41–44). Patent Owner states that it does not object to the definition of a POSITA proffered by Petitioner. PO Resp. 13–14 (citing Pet. 22). In the Institution Decision, we adopted the assessment offered by Petitioner. Dec. 7. Because Petitioner’s definition of the level of skill in the art is consistent with the ’031 patent and the asserted prior art, we maintain it for purposes of this Final Written Decision. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir 2001).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundMixed

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › HindsightNot shown unpatentableDecided for patent owner

    “Dr. Banerjee adequately explains why a POSITA would have been motivated to make dummy structures DS with a conductive core as Petitioner proposes. In an obviousness analysis, some kind of reason must be shown as to why a POSITA would have thought of combining or modifying the prior art to achieve the patented invention. See Innogenetics, N.V. v. Abbott Labs., 512 F.3d 1363, 1374 (Fed. Cir. 2008). Here, Petitioner offers only the general proposition that pillar support structures comprising electrically conductive material were known in the art, but this does not provide a reason why a POSITA would have been motivated to modify Kim’s dummy structures. Pet. 55–56; Ex. 1003 ¶¶ 156–157. Petitioner’s arguments and Dr. Banerjee’s testimony with respect to the modification of Kim leaves an analytical gap that does not apprise us of why a POSITA would have modified Kim’s dummy structures to include a conductive core as the pillar-support material recited in claim 4. Instead, Petitioner attempts to imbue a POSITA with the knowledge of the claimed invention, when no prior art reference, references of record, or other evidence conveys or suggests that knowledge. Petitioner’s argument that a POSITA would have modified Kim in this way appears to be premised on Petitioner’s knowledge of the ’031 patent disclosure. This is improper hindsight reasoning. Petitioner needed to explain sufficiently what invention to consider modifying Kim’s dummy structures to include a conductive core. Petitioner fails to provide such an explanation. See W.L. Gore & Assoc., Inc. v. Garlock, Inc., 721 F.2d 1540, 1553 (Fed. Cir. 1983) (In an obviousness analysis, we must “cast the mind back to the time the invention was made” and “occupy the mind of one skilled in the art who is presented only with the references, and who is normally guided by the thenaccepted wisdom in the art.”).” slip op. at 23

  Patent outcomesUS 10,868,031 mixed
  Claim construction§ 103 obviousnesscites Phillips
  Patents in suitUS 10,868,031
• Micron Technology, Inc. v. Yangtze Memory Technologies Company, Ltd.Some claims unpatentable
  PTAB · Oct 22, 2025 · IPR2024-00794 · APJ Michael T Cygan · IPR · Final written decision

  Claims 1 and 6 are unpatentable over Park; claims 2–5 and 7–11 were not shown unpatentable on the asserted grounds.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “B. Level of Ordinary Skill in the Art Petitioner asserts that a person of ordinary skill in the art (“POSITA”) at the critical time “would have had a bachelor’s degree in electrical engineering or a similar discipline, along with 2-3 years of professional experience working with (e.g., researching, designing, or teaching) NAND flash memory devices, or an equivalent level of skill, knowledge, and experience (e.g., an advanced degree may replace some of the professional experience).” Pet. 19 (citing Ex. 1003 ¶¶ 36–37). Petitioner further asserts that a POSITA “would have been aware of and generally knowledgeable about 3D NAND’s structure, its component parts, how it operates, and how it is controlled.” Id. Patent Owner does not object to this assessment, arguing that its claims are valid regardless of the precise definition. PO 3 Neither party presents evidence or arguments regarding objective evidence of non-obviousness. skill, as it appears to be consistent with the specification of the ’623 patent and the prior art of record.” slip op. at 5

  • Expert testimonyPetitioner expert discountedMixed

    “the Petition, Petitioner’s approach to Shibata’s drive circuit and Park’s dummy channel/open region teachings results in a deficiency in its showing of reasonable expectation of success for its expressed combination of extending Park’s insulative trenches to replace some of its common source lines. Petitioner relies solely on the fact that the references are capable of performing the relied-upon functions or could possess the relied-upon structure. See, e.g., Pet. Reply 19–20 (stating, “If Shibata accommodates this type of trench . . . there is no reason Park cannot as well,” and “Park itself already presents a variety of ways to minimize any etching problem that may be encountered when using wet etching”). But Park does not describe its dummy channel or open region teachings as generally applicable to all of its embodiments. And Petitioner needs to show a reason why the application of Shibata would be reasonably expected to have been successfully applied in Park, not merely state that there is “no reason” to expect that it would not be successful. See DSS Tech. Mgmt., Inc. v. Apple Inc., 885 F.3d 1367, 1377 (Fed. Cir. 2018) (finding that even where two structures have “the same physical structure,” applying the teachings of one structure to the other requires “additional, reasoned analysis.”). The knowledge of one skilled in the art cannot bridge this gap, because these are inventive features of Park and Shibata. Furthermore, Petitioner also has not sufficiently explained, for any of its proposed augmentations, how metal gate deposition would occur sufficiently in the most remote regions of the long, parallel insulating layers in Petitioner’s Park-Shibata combination of such regions to avoid the risk of incomplete gate electrode layers in the final memory device that Patent Owner argues would result in a significant trade-off in memory device accuracy, and device scalability. PO Resp. 68 (citing Ex. 2010 ¶ 145). For example, Dr. Lee addresses only etching issues, not deposition issues. Ex. 1025, ¶¶ 32–47.” slip op. at 46

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner

    “We agree with Petitioner. As pointed out by Patent Owner, the “trenches formed in the BSG” language of claim 1 reflects specific description of the gate-first method of manufacturing, but not the gate-last method of manufacturing. Ex. 1001, 7:17–19 (“referring to Fig. 1A, one or more first dielectric trenches . . . are formed in the one or more BSGs”). However, as Petitioner points out, the claims are to a memory “device,” not to a method of manufacturing or a device produced by specific manufacturing steps. Pet. Reply 1. During prosecution of the application that matured into the ’623 patent, the Examiner determined that the device of claim 1 was distinct from a separately claimed method of manufacturing and The Examiner’s requirement stated that the memory device of claim 1 is not limited by the disclosed process of manufacture because “the process claims require . . . deposition steps of polysilicon whereas the product claims do not require any polysilicon.” Id. Applicant agreed “without traverse” with the Examiner’s determination and selected to pursue only the “device” claims. Id. at 596 (“Applicant elects, without traverse, Invention I, Claims 1–11, drawn to a device”).4 The distinctiveness is also supported by the discussion in the ’623 patent of “formed in the BSG” that describes its device separately from its method of formation. The ’623 patent describes that “[i]n the disclosed memory device, one or more first dielectric trenches are formed in the BSG and extend in a length direction of the substrate to separate the BSG into a plurality of sub-BSGs.” Ex. 1001, 2:25–28. This description precedes, and is separate from, its description of an aspect of a process for manufacturing a memory device in which the BSG layer is formed and then “dielectric trenches are formed” that may “pass through the BSG layer” so that the “BSG layer is separated by the one or more first dielectric trenches into a plurality of sub-BSG layers.” Id. at 3:30–45. The description of the device having trenches formed in the BSG, which is not limited to a particular manufacturing process, further supports Petitioner’s contention that the “formed in the BSG” language is not limited to a particular manufacturing embodiment.” slip op. at 7

  • Claim Construction › Intrinsic evidence (Phillips canons) › Specification disavowal / 'present invention' languageTerm construed board ownDecided for patent owner

    “We do not agree that such arguments support Patent Owner’s conclusion. Patent Owner acknowledges that two portions of a BSG that are connected at a small opening are not separated because both portions remain electrically connected to each other. Id. at 17 (stating, “common source regions 52a is merely in the middle of a single sub-BSG 2 (‘SUB-BLK2’) and does not divide it into further sub-BSGs because there is an H-cut 72 that connects the two sides of the common source region such that both regions are part of the same sub-BSG”) (citing Ex. 1001, 9:15–19, 9:41–44) (emphasis omitted); Ex. 1026, 34:4–15, 41:23–42:16 (Dr. Kuhn attesting that common source regions may isolate adjacent BSGs). Patent Owner considers other portions of the BSG to be separated into sub-BSGs because there is no such connection between the sub-BSG portions. Id. at 17–18 (annotating Ex. 1001, Fig. 1B). Under such reasoning, the addition of a trench closing a gap between two neighboring BSG portions, thereby breaking the electrical connection therebetween, would “separate” the two BSG portions into further sub-BSGs. In its obviousness assertions, Petitioner argues for such an interpretation of the claim. See Pet. Reply 10 (“Park’s layers 111 electrically separate its BSG”). Based on the above, we determine that the phrase “dielectric trenches formed in the BSG and extending in a length direction of the substrate to perform electrical separation between sub-BSGs, but does not require that the trenches act alone, extending from one end of the device to the other across the entire BSG. Similarly, the trenches need not have any particular length, and need only to have some length that performs that separation.” slip op. at 13

  Patent outcomesUS 10,950,623 mixed
  Claim construction§ 103 obviousnesscites Phillips · KSR · Graham
  Patents in suitUS 10,950,623
• Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Feb 18, 2025 · IPR2023-01350 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 5–10 are unpatentable as obvious; claims 11–14 were not shown unpatentable because the evidence did not establish the claimed capacity retention after 400 cycles.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends a person of ordinary skill in the art “would have held a Bachelor’s degree in chemistry or chemical engineering, with at least 4 years of experience in cell design, electrochemical techniques, and battery materials development.” Pet. 4. Petitioner further contends that a “Master’s Degree can substitute[] for some of the relevant experience,” and “[e]quivalent training with battery specific experience can accommodate other degreed fields.” Id. 9 The parties here do not address objective evidence of nonobviousness. Patent Owner does not dispute Petitioner’s definition of the ordinarily skilled artisan. PO Resp. 20. We adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the ’641 patent, the prior art of record, and the parties’ arguments.” slip op. at 6

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther

    “The parties agree that the term “charge cut-off voltage” is “the maximum voltage to which the battery is configured to be charged.” PO Resp 21–22; Pet. Reply 1. The parties dispute, however, whether the “charge cut-off voltage” is a “battery property” or “the voltage applied to the battery during charging.” PO Resp. 21–24; Pet. Reply 1–6. We need not resolve the precise meaning of “charge cut-off voltage” because there is no dispute that Yamaki discloses this limitation under either party’s interpretation of the claim term. Upon review of the prior art and the parties’ arguments, we determine that no terms of the ’641 patent require express construction. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’” (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))); Pet. Reply 1 (asserting that the challenged claims are unpatentable under either parties’ construction of “charge cut-off voltage”).” slip op. at 7

  • Obviousness (§103) › Motivation to combine / reasonable expectation of successUnpatentableMotivation foundUnpatentable

    “Patent Owner’s arguments do not persuasively undermine Petitioner’s position. Sakamoto expressly discloses setting the ratio of negative to positive electrode active material in the range of 1.05 to 1.30. Ex. 1005 ¶ 8. Sakamoto also explains why this range is preferable, i.e., if the ratio is roughly equal “the charge-discharge cycle performance is insufficient due to significant deterioration from charging and discharging,” and if the ratio is 10 Citations to the prosecution history of Yamaki are to the page numbers added to the lower right corner of the document. too high “too much of the compound does not participate in charging and discharging.” Id. ¶¶ 6, 8. These disclosures are sufficient to explain why one of ordinary skill in the art would have found it obvious to select the ratios disclosed in Sakamoto in Yamaki. Id. ¶ 8 (providing a secondary battery with a capacity ratio between 1.05 and 1.30 and noting that by setting the ratio within this range the resulting secondary lithium battery is “safe due to low risk of heat being generated and an explosion occurring”). We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 14

  • Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner

    “We also disagree that Sakamoto teaches away from elevated voltages or from increasing the amount of lithium in circulation. See PO Resp. 29. Contrary to Patent Owner’s arguments, Sakamoto provides no general teaching against using a charge cut-off voltage above 4.2 V, or against increasing the level of lithium in circulation. Nor does Sakamoto “criticize, discredit, or otherwise discourage” the claimed invention. In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004). Rather, Sakamoto warns against setting the reversible capacities of the positive and negative electrode substantially equal as this may result in excess lithium plating on the surface of the electrode. Ex. 1005 ¶¶ 6, 8. We agree with Petitioner that this disclosure would lead one of ordinary skill in the art to design a battery with a higher capacity in the negative electrode active material than the positive electrode active material. Pet. 11–12.” slip op. at 15

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2024-00597 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9–10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “We also agree with Patent Owner that the charge cut-off voltage is not necessarily the applied voltage during charging. PO Resp. 20. Rather, depending on the charging protocol used and when in the charging cycle the voltage is applied, the applied voltage could be higher than the battery voltage. Ex. 2013; Ex. 2006 ¶ 91. For example, as discussed in more detail below with respect to the Uemura grounds, when fast charging using constant current is used and the charging rate is not slow, the applied voltage will be higher than the battery voltage when the constant current charging phase is stopped. Ex. 2006 ¶ 91; Ex. 2013. Likewise, during constant current/constant voltage charging, the applied voltage approximates the battery voltage only when the battery is nearly completely charged. Ex. 2013; Ex. 2006 ¶ 91. Thus, the applied voltage may be, but is not necessarily, the charge cut-off voltage. In view of the foregoing, we construe “charge cut-off voltage” in claims 1 and 5 as “the maximum value to which the battery is configured to be charged.” PO Resp. 18; Ex. 2008, 217:6–11; Pet. Reply 5. Contrary to Patent Owner’s arguments, however, we do not understand the phrase “configured to be charged” to necessarily represent a single voltage for the battery that is determined based on the structure and chemistry of the battery. Pet. Reply 4–5. Rather, the charge cut-off voltage is a selected potential, or voltage, of the battery or cell at the end of charging that is controlled by a circuit or device, such as a charger or control circuit within the battery. Ex. 1001, 9:50–55; Ex. 1048, 2, 7–8; Ex. 1008, 3:9–13. And, for the reasons discussed herein, the charge cut-off voltage may be, but is not necessarily, the same as the applied voltage during charging. PO Resp. 20.” slip op. at 15

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Samsung Electronics Co., Ltd. / Apple Inc. v. RJ Technology LLCSome claims unpatentable
  PTAB · Jan 17, 2025 · IPR2023-01183 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 2–4 and 6–18 are unpatentable as obvious over Abe and Guyomard, with claims 9 and 10 also obvious over Iwaizono; claims 1 and 5 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have had a Master’s degree in material science, chemical engineering, chemistry, or similar field with four years of experience designing testing, and building secondary lithium batteries.” Pet. 11 (citing Ex. 1002 ¶ 51). Petitioner further contends that a person of ordinary skill in the art would have been aware of “(1) positive electrode materials, (2) negative electrode materials, (3) separators, (4) electrolytes, (5) charge-discharge parameters, and (6) protection circuits, as well as ‘battery failure modes’ such as plating and the formation of dendrites.” Id. (citing Ex. 1002 ¶¶ 50–51). Patent Owner “does not dispute Petitioner’s level of ordinary skill.” PO Resp. 17. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the person of ordinary skill in the art as it is consistent with the disclosures of the ’641 patent and the prior art of record.” slip op. at 9

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “constructions. First, we agree with Petitioner that the ’641 patent indicates that the charge cut-off voltage selected for a particular battery need not be a fixed property of the battery or something that is set by the design and chemistry of the battery. Consistent with this conclusion, the ’641 patent discloses that a “charging device controls the charge cut-off voltage of the single lithium-ion cell within a range from 4.3 V to 5.8 V.” Ex. 1001, 9:50– 55. This strongly suggests that the charge cut-off voltage is controlled by the charger and is not necessarily an inherent property of the battery. Patent Owner contends that this is merely an unclaimed embodiment, but the relevant disclosure states that the charging device for the “present invention” may be any type of device “with the proviso that said charging device controls the charge cut-off voltage.” Id. at 9:50–53.” slip op. at 12

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededNot reached

    “charge cut-off voltage “greater than 4.2 V but less than 5.8 V” and calculating a specific or theoretic capacity “with a charge cut-off voltage limited to 4.2” (claim 1) or “with a charge cut-off voltage set at 4.2 V” (claim 5). Ex. 1001, 16:56–61, 17:6–11. Although the parties dispute the precise scope of these claim terms, the parties agree that the first use of “charge cut-off voltage” in claims 1 and 5 refers to the potential of the battery as a whole (between the cathode and the anode), and not a half-cell voltage using lithium metal as a counter electrode.10 Tr. 17:1–3 (agreeing 10 With respect to the phrase “as calculated by a theoretic capacity with a charge cut-off voltage set at 4.2 V,” the parties in fact appear to be in that the first use of “charge cut-off voltage” in claim 5 refers to a full-cell voltage); Sur-reply 5; PO Resp. 22. We need not further construe the claims to resolve the disputes between the parties. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999) (“[O]nly those terms need be construed that are in controversy, and only to the extent necessary to resolve the controversy.”)).” slip op. at 16

  • Expert testimonyPatent owner expert creditedPetitioner expert discountedDecided for patent owner

    “Given Mr. Juzkow’s unambiguous testimony that Uemura uses constant current charging that would stop when the applied voltage reached 11 The chart is reproduced from SAFT, Charging your lithium-ion batteries: 5 expert tips for a longer lifespan, (https://www.saft.com/energizing-iot/charging-your-lithium-ion-batteries-5-expert-tips-longerlifespan#:~: text=When%20the%20battery%20provides%20current,This%20restore s%20the%20battery's%20capacity). 4.3 V, as well as Dr. Yao’s persuasive testimony that Uemura’s constant charging rate is not slow, we credit the testimony of Dr. Yao that one of ordinary skill in the art would have understood that the internal voltage to which the battery of Uemura was charged is less than 4.3 V. Ex. 2006 ¶ 119. In particular, Dr. Yao persuasively testifies that one of ordinary skill in the art would have believed that the charge cut-off voltage was no more than 4.2 V, and most likely equal to “about 4 V.” Id. ¶¶ 119–122. Petitioner argues that because the battery of Uemura is charged “to” a maximum voltage of 4.3 V, Uemura discloses the claimed charge cut-off voltage under either Petitioner’s or Patent Owner’s construction of the term. Pet. Reply 11–12 (citing Ex. 1009 ¶ 81; Ex. 1044 ¶¶ 56–59). This argument is not persuasive because Mr. Juzkow unambiguously testified that charging in Uemura stopped when the applied voltage reached 4.3 V, and Uemura discloses that the battery was charged “at” a voltage ranging from 4.3 V to 2.0 V, not “to” such a voltage. Ex. 1009 ¶ 81; Ex. 2008, 113:2–13; Ex. 2006 ¶ 119 n.64; Sur-reply 9. In view of the foregoing, we determine that Petitioner has not demonstrated by a preponderance of the evidence that Uemura anticipates independent claims 1 and 5 of the ’641 patent.” slip op. at 21

  Patent outcomesUS 7,749,641 mixed
  Claim construction§ 102 anticipation§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 7,749,641
• Chongqing Yanmei Technology Co., Ltd. v. Terves, LLCSome claims unpatentable
  PTAB · Aug 27, 2024 · IPR2023-00521 · APJ Jon B Tornquist · IPR · Final written decision

  Claims 19–61, 63–77, and 79 are unpatentable as anticipated by Doud; claims 78, 80, and 81 are not shown unpatentable. The contingent motion to amend is granted in part and denied in part.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “Petitioner contends that a person of ordinary skill in the art “would have at least a Ph.D. in chemistry, metallurgy, or material science or material engineering” or, in the alternative, “would have a Bachelor of Science or Master of Science degree in one of these disciplines plus experience involving the use and design of dissolvable metal alloys for use in creating tools and other downhole parts for well drilling or completion activities.” Pet. 13–14. Patent Owner does not oppose Petitioner’s contentions regarding the level of ordinary skill in the art. PO Resp. 12 n.4. Upon review of the prior art of record and the parties’ arguments, we adopt Petitioner’s unopposed definition of the ordinarily skilled artisan as it is consistent with the prior art of record.” slip op. at 7

  • Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner

    “With respect to claim 19, Petitioner proposes constructions for the terms “in situ precipitate” and “a plurality of particles of said in situ precipitate having a size of no more than 50 µm.” Pet. 11–12. With respect to claims 76–81, Petitioner proposes a construction for the term “wherein said additive material includes one or more metal materials selected from the group consisting of 0.1–35 wt. % copper, 0.1–24.5 wt. % nickel and 0.1–20 wt. % cobalt.” Id. at 13. Patent Owner contends no claims require construction for purposes of this Decision. PO Resp. 12 n.4, 17–18; Mot. 16–17. Upon review of the prior art of record, we determine that no claim terms require express construction for purposes of this Final Written Decision. See Realtime Data, LLC v. Iancu, 912 F.3d 1368, 1375 (Fed. Cir. 2019) (“The Board is required to construe ‘only those terms . . . that are in controversy, and only to the extent necessary to resolve the controversy.’”) (quoting Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999)).” slip op. at 8

  • Disclosure Requirements (§112) › Written description (Ariad)Written description inadequateWritten description adequateMixed

    “Ex. 2027, 20:25–21:5 (emphasis added). The disclosure that the “magnesium composite” of “[t]he present invention” “includes at least 50 wt% magnesium” is unambiguous and constitutes strong evidence that the inventors were not in possession of a magnesium composite with less than 50 wt. % magnesium, or additive concentrations above 50 wt. %. See SciMed Life Systems, Inc. v. Advanced Cardiovasular Systems, Inc., 242 F.3d 1337, 1343 (Fed. Cir. 2001) (noting that a description of the “present invention” as having a particular structure “is strong evidence that the claims should not be read to encompass the opposite structure”). Consistent with this conclusion, the original claims of the ’295 application all limited the additive material in the composite to 0.05 wt %–45 wt %. Ex. 2027, 26:1– 13, 29:9–15. Likewise, in each example where copper, nickel, or cobalt additives are used in the range recited in the proposed substitute claims, the magnesium composite is “over 50 wt% magnesium,” and any claims that do not require this range of magnesium are limited to an additive range of “about 0.05 wt%–45 wt% of said mixture.”8 Ex. 2027, 6:13–7:4, 7:16–19, 8 Written description support is considered from the view point of the ordinarily skilled artisan. Ariad Pharms., Inc. v. Eli Lilly and Co., 598 F.3d 1336, 1351 (Fed. Cir. 2010) (en banc). Patent Owner, bearing the burden to show written description support in any priority application for which it seeks the benefit of its filing date, provides no testimony from an ordinarily skilled artisan regarding written description support in the ’295 application, or any evidence to show what such an artisan would conclude from the express disclosures of the ’295 application. Lectrosonics, Paper 15 at 7; In re NTP, 654 F.3d 1268, 1276 (Fed. Cir. 2011) (noting that “a patent’s claims are not entitled to an earlier priority date merely because the patentee claims priority . . . Rather, for a patent’s claims to be entitled to an earlier priority date, the patentee must demonstrate that the claims meet the requirements of 35 U.S.C. § 120”). Where there is any ambiguity in the disclosures of the ’295 application, the absence of supporting testimony tends to cut against 26:2–31:2; see Ex. 1005 ¶¶ 12, 13, 18, 19, 16–21, 26, 28, claims 16–21, 26– 28. In view of the foregoing, we are not persuaded that Patent Owner has demonstrated that the inventors of the priority applications were in possession of a magnesium cast composite that included less than 50 wt. % magnesium, or greater than 50 wt. % additives. As proposed substitute claim 104 encompasses a magnesium cast composite with up to 90 wt. % additives, and therefore as little as 10 wt. % magnesium, Patent Owner has not demonstrated that the full scope of this claim finds written description support in any application prior to the ’915 application, filed on October 12, 2018.” slip op. at 17

  • Disclosure Requirements (§112) › Definiteness (Nautilus)DefiniteIndefiniteMixed

    “The definiteness requirement of § 112(a) is satisfied when “a patent’s claims, viewed in light of the specification and prosecution history, inform those skilled in the art about the scope of the invention with reasonable clarity.” Nautilus, Inc. v. Biosig Instruments, Inc., 572 U.S. 898, 910 (2014); see 37 C.F.R. § 42.100(b) (changing the claim construction standard used to review a claim proposed in a motion to amend from the broadest reasonable construction to the “same construction standard that would be used to construe the claim in a civil action under 35 U.S.C. [§] 282(b)”). Proposed substitute claim 104 generically requires “in situ precipitate” and also a specific type of in situ precipitate: “in situ galvanically-active intermetallic precipitate.” Mot. Appendix A. Although this claim would have best been clarified by Patent Owner after seeking preliminary guidance on its Motion to Amend, upon review of the written description, claims, and figures of the ’740 patent, as well as Patent Owner’s clarification in its Reply to the Opposition, we agree with Patent Owner that one of ordinary skill in the art would have understood that the “in situ galvanically-active intermetallic precipitate” is merely a more complete description of the “in situ precipitate” mentioned earlier in the sentence. Mot. Reply 4. As such, we do not find that this part of proposed substitute claim renders claim 104 indefinite.” slip op. at 22

  Patent outcomesUS 10,689,740 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Graham · Nautilus
  Patents in suitUS 10,689,740
• Dexcom, Inc. v. Abbott Diabetes Care Inc.Some claims unpatentable
  PTAB · Jul 10, 2023 · IPR2022-00605 · APJ Cynthia M Hardman · IPR · Final written decision

  Claims 1–6, 8–10, and 12–17 are unpatentable over Gravesen and Brister; claims 7, 11, and 18–28 were not shown unpatentable.

  RulingsFinal written decision

  • Skill levelSkill level petitioner adoptedDecided for petitioner

    “The person of ordinary skill in the art as of the earliest possible effective filing date (“POSITA”) would have had a Bachelor’s degree in Bioengineering, Mechanical Engineering, Electrical Engineering, or a related subject, and one or more years of experience researching, developing and/or designing insertable medical devices, including, e.g., systems for implanting wearable medical devices such as cannulas, infusion sets, and analyte sensors, or equivalent experience. Less work experience may be compensated by a higher level of education, such as a Master’s Degree, and vice versa. Pet. 14–15 (citing Ex. 1003 (Fletcher Decl.) ¶ 22). Patent Owner does not dispute Petitioner’s proposal. PO Resp. 11 n.1. Because Petitioner’s proposed level of ordinary skill in the art appears to be consistent with the cited prior art and is undisputed on this record, we adopt it for purposes of this Decision.” slip op. at 8

  • Expert testimonyPetitioner expert creditedPatent owner expert discountedOther

    “Second, turning to the extrinsic evidence of record, Dr. Fletcher points to a general dictionary definition indicating that a rotor is simply a “rotating member.” Ex. 1003 (Fletcher Decl.) ¶ 81 (citing Ex. 1025 (dictionary excerpts), 1). In contrast, Dr. Cima provides no evidence corroborating his evidence. The language Patent Owner quotes from the Petition comes from a “Dictionary of Mechanical Engineering.” See Pet. 38 n.9 (quoting Ex. 1024, 328). This contradicts Patent Owner’s argument that Petitioner’s proposed construction “has no basis in mechanical engineering.” PO Resp. 19. view that a rotor must rotate on a central axis. He cites a textbook indicating that “[r]otational motion needs to take place around an appropriate axis,” but he does not explain whether or why the “appropriate axis” must necessarily be a “central axis.” Ex. 2024 (Cima Decl.) ¶ 179 (quoting Ex. 2040 (Rotordynamics) 2 (emphasis added)). “Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.” 37 C.F.R. § 42.65(a).” slip op. at 11

  • Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed board ownDecided for petitioner

    “On the full trial record, we again find that Patent Owner’s proposed narrowing is unwarranted. First, the intrinsic record does not support Patent Owner’s required “central” axis. Patent Owner argues that the Specification describes two inserter embodiments as having “rotors,” and those rotors have a central axis. PO Resp. 17–18 (citing Ex. 1001, 29:25–28, 29:55–59, Figs. 32, 45). Patent Owner, however, fails to explain why those embodiments should be understood to limit the claims. For example, in Phillips, the Federal Circuit “expressly rejected the contention that if a patent describes only a single embodiment, the claims of the patent must be construed as being limited to that embodiment.” Phillips, 415 F.3d at 1323; see also SuperGuide Corp. v. DirecTV Enters., Inc., 358 F.3d 870, 875 (Fed. Cir. 2004) (“[A] particular embodiment appearing in the written description may not be read into a claim when the claim language is broader than the embodiment.”). Second, turning to the extrinsic evidence of record, Dr. Fletcher points to a general dictionary definition indicating that a rotor is simply a “rotating member.” Ex. 1003 (Fletcher Decl.) ¶ 81 (citing Ex. 1025 (dictionary excerpts), 1). In contrast, Dr. Cima provides no evidence corroborating his evidence. The language Patent Owner quotes from the Petition comes from a “Dictionary of Mechanical Engineering.” See Pet. 38 n.9 (quoting Ex. 1024, 328). This contradicts Patent Owner’s argument that Petitioner’s proposed construction “has no basis in mechanical engineering.” PO Resp. 19. view that a rotor must rotate on a central axis. He cites a textbook indicating that “[r]otational motion needs to take place around an appropriate axis,” but he does not explain whether or why the “appropriate axis” must necessarily be a “central axis.” Ex. 2024 (Cima Decl.) ¶ 179 (quoting Ex. 2040 (Rotordynamics) 2 (emphasis added)). “Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.” 37 C.F.R. § 42.65(a).” slip op. at 11

  • Strike new argumentNew argument disregardedDecided for patent owner

    “Although the Petition does state that a person of ordinary skill in the art “would understand the plain and ordinary meaning of a ‘recess’ to include ‘an indentation in a line or surface (as an alcove in a room),’” the Petition does not specify what else is “include[d]” in this term, nor does it specify that the plain and ordinary meaning of “recess” includes the entire interior of a housing. The Petition also does not invoke the Specification as demonstrating that the plain and ordinary meaning of “recess” includes the entire housing.13 Pet. 64 (emphasis added). Petitioner’s belated proposal also conflicts with the language of the claims themselves. Independent claim 1 recites “a rotor disposed within the inserter housing.” Ex. 1001, 43:42. Dependent claim 7 narrows claim 1 by reciting that “the housing comprises a recess in which the rotor is received.” Id. at 44:11–12. If the interior of the inserter housing and the recess could be one and the same as Petitioner proposes, there would be no need for claim 7, because it would not further limit claim 1. See 35 U.S.C. § 112(d) (“a claim in dependent form shall contain a reference to a claim previously set forth and then specify a further limitation of the subject matter claimed”); see also Nazomi Commc’ns, Inc. v. Arm Holdings, PLC, 403 F.3d 1364, 1370 (Fed. Cir. 2005) (“The concept of claim differentiation ‘normally means that limitations stated in dependent claims are not to be read into the independent claim from which they depend.’”) (quoting Karlin Tech., Inc. v. Surgical Dynamics, Inc., 177 F.3d 968, 971–72 (Fed. Cir. 1999)). Accordingly, we decline Petitioner’s belated request to construe “recess” to include “an entire cavity of a housing or a cylinder.” 13 We acknowledge that Petitioner argued that the entire interior of Gravesen’s housing maps to the claimed “recess,” but this was in the context of comparing the prior art to the claim as construed. Indeed, Petitioner asserted that “the space within [Gravesen’s] housing is an alcove.” Pet. 64– 65 (emphasis added). In sum, Petitioner did not timely argue that the plain and ordinary meaning of the term “recess” includes an entire cavity of a housing or a cylinder. We adopt the only construction Petitioner offered and supported in the Petition. In view of the above, we construe “recess” as meaning “an indentation in a line or surface (as an alcove in a room).”” slip op. at 16

  Patent outcomesUS 10,945,649 mixed
  Claim construction§ 103 obviousnesscites KSR · Graham
  Patents in suitUS 10,945,649
• Pelican Biothermal, LLC v. Va-Q-Tec AGSome claims unpatentable
  PTAB · Jun 16, 2023 · PGR2021-00085 · APJ Barry L Grossman · PGR · Final written decision

  The Board granted the motion to amend but held amended claim 64 unpatentable as anticipated by NanoCool 98596-type products and obvious over the cited combinations; all other amended claims were not shown unpatentable.

  RulingsFinal written decision

  • PTAB / AIA Trials › Motions to amend / substitute claimsMotion to amend granted in partGranted in part

    “VI. ORDER In consideration of the foregoing, it is hereby: ORDERED that Petitioner has demonstrated by a preponderance of the evidence that amended claim 64 is unpatentable; FURTHER ORDERED that Patent Owner’s Non-Contingent Motion to Amend is granted for claims 64 and denied for all other amended claims; and” slip op. at 77

  • ExcludeMotion to exclude, deniedDenied

    “A. Status as Prior Art Is a Substantive Issue, Not an Evidentiary Issue. A motion to exclude is not an appropriate mechanism for challenging the sufficiency of evidence, such as whether a reference qualifies as prior art, or the proper weight that should be afforded an argument. See Flir Systems, Inc. v. Leak Surveys, Inc., IPR2014-00411, Paper 113, 4, 8–9 (PTAB September 3, 2015); PTAB Consol. Trial Practice Guide 79 (Nov. 30 Mr. Zumwalt testifies that other NanoCool products, designated by product number 85430 and 98630, also have the same configuration as the 98830 product and are made by the same process. Thus, “the 98830, 85430, and 98630 products can be collectively referred to as ‘98830-type’ products all having the same relevant design.” Ex. 1030 ¶ 17. 2019) (“A motion to exclude . . . may not be used to challenge the sufficiency of the evidence to prove a particular fact. A motion to exclude is not a vehicle for addressing the weight to be given evidence—arguments regarding weight should appear only in the merits documents.”); Caterpillar Inc. v. Wirtgen Am., Inc., IPR2017-02187, Paper 42,17 (PTAB May 21, 2019) (status as prior art “is a substantive issue, not an evidentiary issue.”) Thus, whether the NanoCool 98830 product is prior art is not the proper basis for Patent Owner’s Motion to Exclude evidence concerning the NanoCool 98830 product.” slip op. at 29

  • Skill levelSkill level board ownOther

    “Neither Petitioner nor Mr. Harber provide any analysis of the factors pertinent to a determination of the level of ordinary skill, identified above, to support their conclusory statements. We give Mr. Harber’s conclusory testimony minimal probative weight. 37 C.F.R. § 42.64(a) (“Expert testimony that does not disclose the underlying facts or data on which the opinion is based is entitled to little or no weight.”). Moreover, there is no persuasive evidence to which we have been directed of the need for specific education or experience in biological or chemical technologies related to the claimed containers and inserts.” slip op. at 26

  • Expert testimonyPetitioner expert discountedDecided for patent owner

    “With regard to the level of ordinary skill in the art, Petitioner asserts that a person of ordinary skill would have had “a bachelor’s degree or higher degree in biological, chemical or mechanical engineering, or related sciences, and at least two to five years of experience in designing and testing ISCs [insulated shipping containers] depending on education level.” Pet. 9 (emphasis added) (citing Ex. 1002 ¶¶ 23–24). Exhibit 1002 is the Declaration testimony of Mr. Paul Haber. Mr. Harber actually states a slightly different level of ordinary skill. Mr. Harber testifies: The hypothetical POSITA would have: (i) at least a bachelor’s degree in biological, chemical or mechanical engineering, or related sciences, and have at least three to five years of experience in designing and testing ISCs [Insulated Shipping Containers][29]. Such a person may also have (ii) a higher level degree, such as a PhD and/or Master’s degree in engineering, or related sciences, and have at least two to three years of experience in designing and testing ISCs. 29 See Ex. 1002 ¶ 23. Ex. 1002 ¶ 24 (emphasis added). Mr. Harber also testifies that “[t]hese descriptions are approximate, and a higher level of education or specific skill might make up for less experience, and vice-versa.” Id.” slip op. at 25

  Patent outcomesUS 10,766,685 mixed
  Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · KSR · Graham
  Patents in suitUS 10,766,685

Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.