- PTAB · Sep 19, 2025 · PGR2025-00025 · APJ Kimberly Mcgraw · PGR · Institution
The Board instituted PGR on claims 1–19 and all asserted grounds, finding it more likely than not that claim 1 is anticipated by the Gatorade Label.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)InstitutedInstituted
“if “the information presented in the petition . . . demonstrate[s] that it is more likely than not that at least 1 of the claims challenged in the petition is unpatentable.” Post-grant review is available for patents that issue from applications that at one point contained at least one claim with an effective filing date on or after March 16, 2013. See Leahy-Smith America Invents Act, Pub. L. No. 112-29, 125 Stat. 284 (2011) (“AIA”), §§ 3(n)(1), 6(f)(2)(A). After considering the briefing and the evidence of record, for the reasons set forth below, we determine that Petitioner has shown that the ’422 Patent is eligible for post-grant review and has shown it is more likely than not that at least one challenged claim of the ’422 Patent is unpatentable under § 324(a). Accordingly, we institute a post-grant review of the challenged claims of the ’422 Patent.” slip op. at 2
- Skill levelSkill level petitioner adoptedDecided for petitioner
“B. Level of Ordinary Skill in the Art Petitioner contends that a person of ordinary skill in the art “would possess at least (1) a Bachelor’s degree in chemistry or a related field, with (2) five years of experience in material identification and characterization using multiple analytical methods and field sampling, or equivalent research or professional experience.” Pet. 12 (citing Ex. 1014 ¶ 24). Patent Owner does not dispute Petitioner’s definition for one of ordinary skill in the art nor provide a proposed definition of its own. See generally Prelim. Resp. For the purposes of this Decision, we adopt Petitioner’s undisputed proposal regarding the level of one of ordinary skill in the art.” slip op. at 7
- Claim Construction › Intrinsic evidence (Phillips canons) › Prosecution history disclaimer / disavowalDisclaimer foundDecided for patent owner
“336. The applicant explained that not all combinations of shrink films and light blocking materials are recyclable. Id. at 335. The applicant explained that films can be compatible with PET recycling in two ways, (1) the film can float in water and be separated from PET that sinks in water or (2) the PET films crystallize and “can be recovered with the PET stream.” Id. at 336 (citing “A Resource Document by the Association of Plastic Recyclers (APR)”) (found at Ex. 1002, 323–332) (emphasis omitted). The applicant explained that “removing the label before or during the recycling process is not evidence of the recyclability of the label” and that “[r]emoving the label during the recycling process is not equivalent to actually recycling the label.” Id. at 335. As such, a POSITA reading the prosecution history would understand that a label is not recyclable with a PET container, as recited by the independent claims, by removing the label from the PET recycle stream before or during the recycling process.” slip op. at 10
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed board ownOther
“To determine how a person skill in the art would determine if a shrink label is “recyclable” as recited in the independent claims, we look to how the Specification of the ’422 Patent describes or defines recyclable shrink labels. For example, the ’422 Patent states that PET shrink films are generally considered recyclable if no inks are retained on the film after a caustic wash cycle typically used in PET reclaiming processes. Ex. 1001, 6:61–65. The ’422 Patent further states that labels are fully recyclable if the polymers used are clear, preferably clear PET, and the labels include inks that can be washed off in a “typical PET recycling wash (caustic wash).” Id. at 11:44– 49; see also id. at 11:49–54 (describing embodiments in which the labels are free or substantially free of inks that cannot be washed off in a caustic wash or where the labels are free or substantially free of color plastics that cannot be recycled). The ’422 Patent further discusses “industry standards” for determining whether various embodiments of shrink labels are recyclable. See, e.g., id. at 11:29–53. For example, the Specification states that the “Association for Plastic Recyclers (APR) Critical Guidance Protocol for Clear PET Articles with Labels and Closures (PET-CG-02)” (Ex. 1005) can certify that a film is fully recyclable with a container or bottle. Id. at 11:34– 38. Additionally, the Specification states that labels “are recyclable according to the Evaluation of the Near Infrared (NIR) Sorting Potential of a Whole Plastic Article (SORT-B-01)” (Ex. 1010) and/or the “Evaluation of Sorting Potential for Plastic Articles Utilizing Metal, Metalized, or Metallic Printed Components (SORT-B-03)” (Ex. 1011). Ex. 1001, 11:39–44. The ’422 Patent further states that embodiments of the labels “are fully recyclable. For example, the labels may include inks that can be washed off in a typical PET recycling wash (caustic wash) and the polymers” are preferably clear PET. Id. at 11:44–48. The ’422 Patent thus provides various descriptions or standards to determine the recyclability of shrink labels. For the purposes of addressing the anticipation and obviousness grounds, we determine that any of these standards can be used to determine if a shrink label is “recyclable.” We note that our construction is preliminary and is based on the present record. We invite the parties to further the address the construction of “wherein the recyclable shrink label is recyclable with a PET container” during trial.” slip op. at 12
Claim construction§ 102 anticipation§ 103 obviousness§ 112 disclosurecites Phillips · NautilusPatents in suitUS 11,961,422 - Champion Laboratories, Inc. / First Brands Group, LLC v. Hengst SENo claims unpatentablePTAB · Sep 8, 2025 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1, 3, 5, 8–11, 15–17, 19, 23–25, and 28–30 were not shown unpatentable over Yokoyama, Yokoyama and Cline, or Honermann and Cline.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). Because the level of ordinary skill in the art is not in dispute, and because the parties’ definition is consistent with the disclosures in the ʼ203 patent, the prior art, and the declaration testimony of Mr. Nranian and Dr. Basirat, we view the prior art and arguments through this lens when determining whether the claims are unpatentable as obvious over the prior art.5 See Graham, 383 U.S. at 17 (identifying “the level of ordinary skill in the pertinent art” as an underlying factual inquiry to be resolved in deciding obviousness, which is a question of law).” slip op. at 12
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededDecided for patent owner
“Although the parties spend significant portions of their briefing discussing the term “eccentric” and how it applies to certain figures from the ʼ203 patent and the relied-upon prior art, we determine that it is not necessary to expressly construe the term “eccentric” beyond the parties’ agreed-upon definition. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))). Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“Rather, we adopt Patent Owner’s proffered definition because it is consistent with the intrinsic record and because it is not in dispute. Specifically, Patent Owner asserts that the plain meaning of the term “eccentric” is defined as “located elsewhere than at the geometric center; also: having the axis or support so located.” PO Resp. 18–19 (citing the Merriam-Webster online dictionary definition of the term “eccentric” for support). Petitioner agrees with this definition. Pet. 35 (asserting that certain prior art elements are eccentric “because they are not located at the center of the filter insert or housing”); Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”); see also Ex. 2017 ¶ 33 (Dr. Basirat testifying that “[a] POSITA would understand that ‘eccentric’ in the context of [the] ʼ203 patent, means that central axis is located elsewhere than at the geometric center [and] not placed centrally or not having its axis or other part placed centrally”). The parties’ definition of “eccentric” is also consistent with the usage of the term in the ʼ203 patent. Ex. 1001, 10:23–31; Fig. 17.” slip op. at 14
- Expert testimonyPetitioner expert discountedDecided for patent owner
“(opining that “Patent Owner’s construction of ‘having an axis no located in a geometric center’ is too narrow”). Mr. Nranian’s Declaration testimony in this respect is not persuasive for several reasons. First, it is internally inconsistent. Compare Ex. 1016 ¶ 3 (criticizing the “axis” language in Patent Owner’s definition), with id. ¶¶ 9, 11 (relying on that very language to support an argument). Also, Mr. Nranian’s proposed definition of “eccentric” to merely mean “not located at the center” begs the question of what, precisely, is “the center”? Mr. Nranian does not persuasively explain how far a person of ordinary skill in the art would understand she could travel from the exact center point of an object and still be in “the center” of that object. See Tr. 10:13–19 (Judge McGee asking whether the center is “a miniscule point in the middle of [the] disc”); see also id. at 10:25–12:26 (Judge Weatherly highlighting the significant ambiguity in referring to something as in “the center”). Also, Mr. Nranian’s opinion is inconsistent with how the ʼ203 patent compares something that is “central,” i.e., “at the center,” and something that is “eccentrically” located. Ex. 1001, 7:13–14 (describing pipe nozzle 15 as “central”); id. at 8:53–56 (describing a “through hole” as “located in the center of the front panel 22” depicted in Figures 7 and 8); id. at 10:23–31 (describing return 12 as “in the center” and outlet 13 as “eccentrically thereto” in Figure 17). Patent Owner’s colorized and annotated Figure 7 is reproduced below: Patent Owner’s colorized and annotated version of Figure 7 of the ʼ203 patent illustrates “central pipe nozzle 15” in yellow passing through the “through hole” located in “the center” of front panel 22. PO Resp. 20. Significantly, pipe nozzle 15 and the through hole in panel 22 are both described as “central” and in “the center” but must have different diameters; otherwise, “central pipe nozzle 15” would not be capable of traveling through “through hole 22.” Ex. 1001, Fig. 7. Thus, the ʼ203 patent intrinsically bases whether an element is “central” or “in the center” on whether its axis is located at the geometric center. This is also illustrated in Figure 17 of the ʼ203 patent, reproduced below: Figure 17 of the ʼ203 patent illustrates filter housing 10 with return 12 “in the center . . . and, eccentrically thereto, the outlet 13 with the seat 14 for the blocking element 24.” Ex. 1001, 10:23–30. Finally, Mr. Nranian’s narrow interpretation of “eccentric”––which excludes the “having the axis or support so located” in the geometric center language––is at odds with the arguments it was proffered to support. Cf. Pet. Reply 9 (arguing that certain elements are eccentric because they “do not have an axis located at the geometric center”); id. at 10 (arguing the eccentricity of an element that does “not have an axis in the center” which has “an off-center axis”).” slip op. at 29
Patent outcomesUS 9,023,203 not shown unpatentableClaim construction§ 103 obviousnesscites GrahamPatents in suitUS 9,023,203 - Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentablePTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15
Patent outcomesUS 11,041,087 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,041,087 - PTAB · Sep 18, 2024 · IPR2024-00603 · APJ Sheldon M Mcgee · IPR · Institution
The Board instituted IPR on all challenged claims and all asserted grounds, finding a reasonable likelihood that Petitioner would prevail on claim 1 over Honermann and Cline.
RulingsInstitution decision- Skill levelSkill level patent owner adoptedDecided for patent owner
“Pet. 5–6 (citing Ex. 1003 ¶ 50). Petitioner further states “that more education could compensate for less experience and vice versa.” Id. at 6. Petitioner’s position is, therefore, consistent with Patent Owner’s proffered level of skill in the art which reflects less education and more experience in substantially the same fields. Specifically, Patent Owner asserts that such a skilled artisan “would have at least a bachelor’s degree in mechanical or automotive engineering and/or five or more years of experience in the automotive industry designing, developing, testing, and engineering automotive components or practical experience servicing, assembling, repairing, and/or developing internal combustion engines and/or engine oil filters.” Prelim. Resp. 4. On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Patent Owner’s definition because it is consistent with the disclosures of the asserted prior art references. We note, however, that we would reach the same conclusion under either parties’ definition.” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that all non-“means” terms in the challenged claims should be afforded their plain and ordinary meaning, and that the “means” limitations recited in claims 1 and 15 should not be construed as means-plus- function terms pursuant to 35 U.S.C. § 112(6). Pet. 7. According to Petitioner, claims 1 and 15 include additional limitations that denote structure for those “means” limitations and furthermore do not recite a function corresponding to the recited means. Id. Patent Owner asserts that “the Board need not make a determination on claim construction in assessing whether to institute” trial. Prelim. Resp. 5. After review of the preliminary record, we determine that no claim terms require an express construction for purposes of institution. See Wellman, Inc. v. Eastman Chem. Co., 642 F.3d 1355, 1361 (Fed. Cir. 2011) (“[C]laim terms need only be construed ‘to the extent necessary to resolve the controversy.’”).” slip op. at 8
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsDecided for petitioner
“2. Advanced Bionics Prong One: whether “the same or substantially the same art or arguments previously were presented to the Office” As Petitioner acknowledges, a Japanese-language version of Yokoyama was cited in an IDS without an English translation. Pet. 19; Ex. 1002, 34 (indicating that an English translation was not provided by virtue of the absence of a checkmark in the “T” column on the far right of the PTO/SB/08a form).4 The Yokoyama reference relied on in the Petition (Ex. 1008) however, includes an English language translation of the text in 4 It is also not readily apparent that Patent Owner complied fully with the “Content Requirements for an Information Disclosure Statement” as set forth in MPEP § 609 in its IDS submission dated March 30, 2015. Specifically, § 609.04(a)(III) states that “[e]ach information disclosure statement must further include a concise explanation of the relevance . . . of the information listed that is not in the English language.” (italicized emphasis added, underlining in original); see also § 609.01 B.3 (stating this requirement). It does not appear that any concise explanation was filed with respect to either Japanese reference filed in the IDS. See Ex. 1002, 13–38 (IDS documents pertaining to Yokoyama reference); Semiconductor Energy Laboratory Co. v. Samsung Electronics Co., 204 F.3d 1368, 1376 (Fed. Cir. 2000) (“[A]lthough MPEP Section 609[] allows the applicant some discretion in the manner in which it phrases its concise explanation, it nowhere authorizes the applicant to intentionally omit altogether key teachings of the reference.”). addition to the Drawings that also appear in the untranslated Japanese-language version of Yokoyama submitted during prosecution. Compare Ex. 1007 (containing Japanese text with Figures 1–7c), with Ex. 1008 (containing English text along with Figures 1–7c). As such, the Yokoyama reference relied on in the Petition––being in English––contains roughly ten pages of more readily discernible information than the Japanese-language version of this reference submitted during prosecution. Significantly, Petitioner relies on textual disclosure in the English-translated version of Yokoyama in its challenges. Pet. 28–51, 54, 58, 59 (citing Ex. 1008 repeatedly). Such English-translated disclosure was not previously before the Examiner. Ex. 1002, 13–38. In view of this additional disclosure before us in English, i.e., disclosure that was not presented previously to the Office, we find that the English translated version of Yokoyama relied on here (Ex. 1008) is not “the same or substantially the same art” that was previously presented to the Office (Ex. 1007).” slip op. at 10
- PTAB / AIA Trials › Discretionary denial › Fintiv (parallel litigation)Decided for petitioner
“discretionary denial, we must also consider whether the Petition presents compelling merits. IPR2022-01242, Paper 23 at 4–5. As set forth above, we have considered the circumstances and facts before us in view of Fintiv factors 1–5, and determine that: Factor 1 is neutral, Factor 2 weighs heavily against discretionary denial, Factor 3 is neutral, Factor 4 weighs against discretionary denial, and Factor 5 weighs in favor of discretionary denial. Factors 1–5, considered as a whole, collectively weigh against exercising discretion to deny institution. As such, we need not undertake a “compelling merits” analysis as set forth under CommScope. The Merits Even though we do not consider here whether the merits are “compelling,” we do consider the merits of the Petition under Fintiv factor 6. As set forth below, we determine that Petitioner has satisfied the reasonable likelihood standard for purposes of institution. Such satisfaction weighs further against discretionary denial of the Petition.” slip op. at 19
Claim constructionDiscretionary denialcites PhillipsPatents in suitUS 9,023,203 - Salem Fabrication Technologies Group, Inc. v. Uniglass Engineering OYInstitution deniedPTAB · Mar 22, 2023 · IPR2022-01516 · APJ Elizabeth M Roesel · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–5 were obvious over the asserted combinations.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Pursuant to our delegated authority, we may not institute an inter partes review “unless . . . the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018); 37 C.F.R. § 42.4(a) (2022). After considering the information presented in the Petition and the Preliminary Response, we determine that the reasonable likelihood standard is not met. Accordingly, we deny institution of an inter partes review.” slip op. at 2
- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed patent owner constructionDecided for patent owner
“We agree with Patent Owner that separate structures are required. The strongest evidence for this requirement is the claim language itself, which plainly recites two different elements: “a pressurization unit” for inside air and “a compressor” for outside air. The separate naming of two elements in the claim strongly implies that they are not one and the same structure. Becton, Dickinson & Co. v. Tyco Healthcare Group, LP, 616 F.3d 1249, 1254 (Fed. Cir. 2010) (“Where a claim lists elements separately, the clear implication of the claim language is that those elements are distinct components of the patented invention.” (punctuation omitted) (quoting Gaus v. Conair Corp., 363 F.3d 1284, 1288 (Fed. Cir. 2004))).” slip op. at 8
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“At most, the similarities between each pair of references establish, as a threshold matter, that they would have been considered by a POSITA. See K-Tec, Inc. v. Vita-Mix, Corp., 696 F.3d 1364, 1375 (Fed. Cir. 2012) (to qualify as prior art in an obviousness analysis, references must be analogous art—either in the same field of endeavor, or reasonably pertinent to the problem with which the inventor is involved). But the asserted similarities alone are not sufficient to show that a POSITA would have had a reason to combine the teachings in the manner described in the challenged claims. Personal Web Techs., LLC v. Apple, Inc., 848 F.3d 987, 994 (Fed. Cir. 2017) (It is not enough that a skilled artisan, once presented with two references, would have understood that they could be combined; Petitioner needs to establish a motivation to pick out the two references and combine them to arrive at the claimed invention.). Next, Petitioner asserts that a POSITA would have been motivated to modify the glass tempering furnace of each base reference “to temper low-E glass more quickly and efficiently.” Pet. 24, 27, 30 (citing Ex. 1003 ¶¶ 82, 90, 98). As discussed below, Petitioner fails to show a sufficient logical connection between the asserted motivation and the proposed modification(s) of the base references. Stated differently, Petitioner fails to show a sufficient reason why a POSITA would have made the modifications necessary to bridge the gap between the prior art and the claimed subject matter. We discuss each pair of references more specifically below.” slip op. at 18
- Skill levelSkill level petitioner adoptedOther
“Petitioner contends that a person of ordinary skill in the art (“POSITA”) would have had “at least a two-year technical degree in engineering or science (materials, chemistry, etc.), or at least two years of work experience in the field of materials processing and/or fabrication (such as glass or ceramics), and/or the industrial processes and machinery used for materials processing and/or fabrication.” Pet. 7 (citing Ex. 1003 ¶ 27). For purposes of the Preliminary Response, Patent Owner does not dispute Petitioner’s definition of a POSITA. Prelim. Resp. 27. For purposes of this Decision, we apply Petitioner’s definition of a POSITA, which is consistent with the scope and content of the ’911 Patent and the asserted prior art.” slip op. at 7
Claim construction§ 103 obviousnessDiscretionary denialcites Phillips · KSR · GrahamPatents in suitUS 8,650,911 - Markforged Inc. v. Continuous Composites, Inc.Institution deniedPTAB · Jan 18, 2023 · IPR2022-01431 · APJ Sheldon M Mcgee · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood that claims 1–4 were unpatentable over the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“III. ANALYSIS We have authority to institute an inter partes review only where “there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). Our findings and conclusions set forth in this Decision are provided for the exclusive purpose of explaining our determination that Petitioner has not met that standard on this record.” slip op. at 5
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation not foundNot shown unpatentable
“The question of whether the prior art references are in the same field of endeavor is merely a threshold issue that must be satisfied before an obviousness determination can be made. See K-Tec, Inc. v. Vita-Mix, Corp., 696 F.3d 1364, 1375 (Fed. Cir. 2012) (to qualify as prior art in an obviousness analysis, references must be analogous art—either in the same field of endeavor, or reasonably pertinent to the problem with which the inventor is involved). In other words, once it is determined that the prior art is analogous to the claimed invention, it is then necessary to show that it would have been obvious for the skilled artisan to select and combine the teachings of the prior art in the manner claimed. Thus, we agree with Patent Owner that the Petition needs to set forth specific reasoning as to why an ordinarily skilled artisan would have been motivated to combine these references even if they are in the same or similar fields. Prelim. Resp. 31. Petitioner fails to do so on this record. The absence of such reasoning is particularly noteworthy here in view of Ma’s numerous teachings which appear to discredit the “passive” method of pulling the composite strand from the extruder as recited in claim 4, which is challenged in each of Grounds 2 and 3. Patent Owner identifies no fewer than eight disclosures within Ma that seemingly disparage the passive “pulling” method and discuss benefits of the active “pushing” method. Prelim. Resp. 16–19 (citing Ex. 1007, 53, 95–96, 98–107, 143–147, 149, 167–168). In the absence of any explanation from Petitioner on this point, we are not persuaded that the skilled artisan would have ignored those teachings and selected Ma’s pulling method.” slip op. at 19
- Expert testimonyPetitioner expert discountedDecided for patent owner
“explained why the ordinarily skilled artisan would have combined the non-precoating embodiment of Lipsker’s Figure 2 and the precoating embodiment of Lipsker’s Figure 5, much less with a reasonable expectation of successfully arriving at the subject matter of challenged claims 1–3. Prelim. Resp. 22–23. As Patent Owner correctly observes (id.), Petitioner’s general assertion that “Lipsker discloses that combinations of disclosed embodiments and features are possible and proper” (Pet. 20) does not constitute a reasoned explanation regarding why the skilled artisan would have combined Lipsker’s precoating and non-precoating actuator embodiments to arrive at the claimed subject matter. Moreover, Dr. Rosen’s declaration testimony on this point is entitled to little to no weight as it merely parrots the Petition. Compare Pet. 20, with Ex. 1002 ¶ 69. 37 C.F.R. § 42.65(a).” slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Petitioner’s proposed definition because, on this record, it is consistent with the disclosures of the asserted prior art references. In any event, for the reasons explained below, even under Petitioner’s definition, Petitioner fails to establish a reasonable likelihood of prevailing at trial with respect to any challenged claim based on the grounds of unpatentability advanced in the Petition.” slip op. at 9
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 11,173,660 - Markforged Inc. v. Continuous Composites, Inc.Institution deniedPTAB · Jan 11, 2023 · IPR2022-01220 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of proving claims 13, 14, and 17–20 unpatentable on the asserted obviousness grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2021). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level board ownOther
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review.” slip op. at 7
- Expert testimonyPetitioner expert discountedOther
“means of the precuring device 15, causing the surface to dry and stick.”). In light of these disclosures in Wohrl, Petitioner does not adequately explain why a POSITA would have understood that using a nip roller to press the path onto the core, then precuring the path as it is laid, creates an anchor as the ’798 patent teaches. Nor does Petitioner sufficiently address why a POSITA would have understood Wohrl to be teaching the use of an anchor when Wohrl uses a core to support the formation of the part. Moreover, Dr. Rosen’s declaration testimony on this point is entitled to little to no weight as it merely parrots the Petition. Compare Pet. 101–102, with Ex. 1002 ¶¶ 414–416; see 37 C.F.R. § 42.65(a).” slip op. at 34
- Obviousness (§103) › Motivation to combine / reasonable expectation of successNot shown unpatentableMotivation not foundNot shown unpatentable
“teachings of multiple references, an articulated reason with some rational underpinning to combine the known elements in the fashion claimed must be provided. See KSR Int’l Co. v. Teleflex, Inc., 550 U.S. 398, 418 (2007); see also In re Magnum Oil Tools, Int’l, Ltd., 829 F.3d 1364, 1381 (Fed. Cir. 2016) (It is the petitioner’s “burden to demonstrate both that a skilled artisan would have been motivated to combine the teachings of the prior art references to achieve the claimed invention[s], and that the skilled artisan would have had a reasonable expectation of success in doing so.” (citation and internal quotation marks omitted)). Having reviewed the parties’ arguments and evidence of record, we are not persuaded that Petitioner provides sufficient articulated reasoning with a rational underpinning as to why one of ordinary skill in the art would have combined the teachings of Ma and Lipsker in the manner recited in the challenged claims.” slip op. at 14
§ 103 obviousnesscites Phillips · KSRPatents in suitUS 9,987,798 - Markforged Inc. v. Continuous Composites, Inc.Institution deniedPTAB · Jan 11, 2023 · IPR2022-01218 · APJ Jo-Anne M Kokoski · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of prevailing on any challenged claim, including because Ma taught against pulling, combinations lacked adequate motivation, and Wohrl did not disclose the claimed …
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsInstitution denied
“Institution of an inter partes review is authorized by statute when “the information presented in the petition . . . and any response . . . shows that there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314 (2018); see also 37 C.F.R. § 42.4 (2021). For the reasons discussed below, we deny the Petition and do not institute an inter partes review.” slip op. at 2
- Skill levelSkill level board ownOther
“Petitioner contends that a person having ordinary skill in the art (“POSITA”) would have had “a master’s degree in mechanical engineering, materials science, or a related degree, and at least 3–5 years of experience in composite materials or additive manufacturing,” or a bachelor’s degree in the same fields and at least 5–6 years of experience. Pet. 12–13 (citing Ex. 1002 ¶ 36). Patent Owner states that it “does not agree that Petitioner’s proposed level of skill in the art accurately reflects the level of ordinary skill in the art as of the priority date . . . . Regardless of what level of skill is applied, however, the Petition does not show a reasonable likelihood to prevail.” Prelim. Resp. 3. Patent Owner does not propose a different level of skill in the art at this stage of the proceeding. See id. at 3–4 (“Patent Owner reserves the right to propose a level of ordinary skill in the art in this proceeding should it be instituted, or in other proceedings.”). On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review.” slip op. at 6
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“Petitioner asserts that the “claim terms should be given their plain and ordinary meaning because, to the extent certain claim terms are subject to multiple interpretations, those questions do not affect the grounds advanced here.” Pet. 13 (footnote omitted). Patent Owner does not address claim construction at this stage of the proceeding. See generally Prelim. Resp. We determine that no claim term requires express construction for purposes of this Decision.” slip op. at 7
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayNot shown unpatentableMotivation not foundNot shown unpatentable
“Ma distinguishes between these two methods, noting that with the “active” method, “the forming quality of a previous layer does not influence the forming of the current layer,” while with the “passive” method, “the quality of a previous layer has a profound effect on the forming quality of the current layer.” Ex. 1007, 53. Ma sets forth other problems with using the “passive” method. See, e.g., id. at 95–96, 98–107, 143, 145–147, 149. For example, Ma teaches that during deposition using the “passive” method, “it is possible to make a big error, especially when the nozzle makes a big-angle turn” (id. at 98), and that “[a] toolpath error could be generated if an anchoring point is not formed properly” when using the “passive” method (id. at 143). Ma also discloses that forming speed is an issue with the “passive” method, (id. at 146), but discloses “[o]ne of the advantages [of the ‘active’ method] is that the forming speed is not limited by the solidification condition of the towpreg during the forming process” (id. at 168). 2. Analysis Claim 1 recites, inter alia, “moving the nozzle away from the anchor during discharging to pull the path of the composite material out of the nozzle.” Ex. 1001, 10:61–63. Petitioner contends that Ma teaches this limitation because “Ma discloses that ‘when the object moves relative to the nozzle during the forming process, the towpreg is pulled out by the object instead of being pushed out by nozzle pressure” and “the anchor points are used to pull the towpreg (‘the path of the composite material’) out of the nozzle during discharging.” Pet. 33 (citing Ex. 1007, 38, 72)(emphasis omitted). controlled layer manufacturing: an “active” method that pushes the composite material from an extruder’s orifice, and a self-anchoring or “passive” method, wherein the composite material is pulled out by the object. Ex. 1007, 7–8, 52–54. Here, Petitioner relies on Ma’s disclosures relating to the passive method. Petitioner, however, fails to provide a persuasive explanation as to why a POSITA would have selected Ma’s passive pulling method over Ma’s active pushing method for further development or improvement. Petitioner’s failure to do so is particularly noteworthy here, because Ma includes numerous teachings against the passive method of pulling the composite material through the nozzle. Indeed, Patent Owner identifies no fewer than eight disclosures within Ma that seemingly disparage the passive pulling method and discuss the benefits of the active pushing method. Prelim. Resp. 7–10 (citing Ex. 1007, 53, 95– 96, 98–107, 143–147, 149, 167–168). We also agree with Patent Owner that Petitioner has not sufficiently explained why the ordinarily skilled artisan would have combined Ma’s active and passive methods, much less with a reasonable expectation of successfully arriving at the subject matter of claim 1. Id. at 11–14. In the absence of any explanation from Petitioner, we are not persuaded that a POSITA would have ignored Ma’s teachings against the passive pulling method and selected Ma’s pulling method over Ma’s active pushing method for further development and improvement. Accordingly, Petitioner has not demonstrated a reasonable likelihood that claim 1 would have been obvious over Ma.” slip op. at 8
Claim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 9,987,798 - Google LLC v. Valtrus Innovations LimitedInstitution deniedPTAB · Jan 3, 2023 · IPR2022-01197 · APJ Sheldon M Mcgee · IPR · Institution
The Board denied institution because Petitioner did not show a reasonable likelihood of prevailing on the Ogawa grounds and § 325(d) barred the Vea grounds.
RulingsInstitution decision- PTAB / AIA Trials › Institution threshold (reasonable likelihood / more likely than not)Institution denied meritsDenied
“there is a reasonable likelihood that the petitioner would prevail with respect to at least 1 of the claims challenged in the petition.” 35 U.S.C. § 314(a) (2018). The findings and conclusions set forth in this Decision are provided for the exclusive purpose of explaining our determination that Petitioner has not met that standard on this record. slip op. at 7
- PTAB / AIA Trials › Discretionary denial › §325(d) same art / argumentsInstitution denied 325dDenied
“framework set forth under Advanced Bionics, LLC v. Med-El Electromedizinische Geräte GmbH, IPR2019-01469, Paper 6 at 7 (PTAB Feb. 13, 2020) (precedential) (“Advanced Bionics”). Under that framework, we must first determine whether the same or substantially the same art or arguments previously were presented to the Office. If so, we must then determine whether the petitioner has demonstrated that the Office erred in a manner material to the patentability of the challenged claims. Id. at 8.” slip op. at 21
- Skill levelSkill level petitioner adoptedDecided for petitioner
“On this record, we determine that the level of ordinary skill is reflected in the prior art of record. See Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (specific findings on the ordinary skill level are not required “where the prior art itself reflects an appropriate level and a need for testimony is not shown” (quoting Litton Indus. Prods., Inc. v. Solid State Sys. Corp., 755 F.2d 158, 163–64 (Fed. Cir. 1985))). A more specific definition is not necessary for purposes of deciding whether to institute review. To the extent a more specific definition is required, however, we adopt Petitioner’s proposed definition because, on this record, it is consistent with the disclosures of the asserted prior art references.” slip op. at 10
- Expert testimonyPetitioner expert discountedDecided for patent owner
“12 Dr. Madisetti’s testimony here is entitled to little to no weight as it merely parrots the Petition. 37 C.F.R. § 42.65(a).” slip op. at 19
§ 103 obviousnessDiscretionary denialcites PhillipsPatents in suitUS 6,816,809 - Arkema Inc. / Arkema France v. Honeywell International Inc.All claims unpatentablePTAB · Aug 25, 2022 · PGR2016-00012 · APJ Sheldon M Mcgee · PGR · Remand
Claims 1–20 are unpatentable under § 102(a) for prior public use; the Board did not reach the remaining anticipation, obviousness, and enablement grounds.
RulingsRemand decision- RemandOther
“On October 1, 2019, the Federal Circuit held that we “abused [our] discretion by assuming the authority that 35 U.S.C. § 255 expressly delegates to the Director: to determine when a Certificate of Correction is appropriate,” and vacated our Final Written Decision. Honeywell Int’l Inc. v. Arkema Inc., 939 F.3d 1345 (Fed. Cir. 2019). The Federal Circuit instructed us to “authorize Honeywell to file a motion seeking leave to petition the Director for a Certificate of Correction.” Id. at 1351. Pursuant to the Federal Circuit’s mandate, we gave our authorization, and Patent Owner filed its Motion for Leave to Request a Certificate of Correction. PGR11 Paper 61; PGR12 Paper 41. After additional briefing from the parties was complete, we granted Patent Owner’s Motion. PGR11 Paper 77; PGR12 Paper 57. Patent Owner filed its Request for a Certificate of Correction, as well as a Petition to Accept [Unintentionally] Delayed Claim to Priority under 35 U.S.C. § 120 and 37 C.F.R. § 1.78. PGR11 Ex. 2174; PGR12 Ex. 2172.” slip op. at 3
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). And, although there are no bright-line rules for the amount of disclosure needed in an unpredictable art, that amount “necessarily changes with each invention” and “changes with progress in the field.” Ariad, 598 F.3d at 1351. Here, we find that the art of AAC was unpredictable and that a heat-transfer composition for AAC required specific technical features that were unpredictable and unexpected. Thus, we conclude that the ’525 application requires a more-detailed disclosure than would be required in a predictable field to adequately demonstrate possession of a heat-transfer composition consisting essentially of HFO-1234yf and PAG for use in AAC. (iii) Disclosure in the ’525 Application With these background findings in mind, we now turn to the four corners of the ’525 application—and we find that the ’525 application does not contain the detailed disclosure needed in this case to reasonably convey possession of a heat-transfer composition consisting essentially of HFO- 1234yf and PAG for use in AAC.” slip op. at 37
- Skill levelSkill level board ownDecided for patent owner
“develops new refrigerants for use as heat transfer fluids. Ex. 1002 ¶ 149. Such a person would have had a Ph.D. in Chemistry, Chemical Engineering, Mechanical Engineering, Material Science, or a related field or discipline and at least 3 to 5 years of experience, or alternatively an M.S. degree and 5 to 10 years of experience. Id. Patent Owner’s Declarant, Dr. Bivens, provides a similar description of the person of ordinary skill in the art, stating that such a person would have a B.S. degree in Chemical Engineering or Chemistry, and five years of work experience, or a Ph.D. or M.S. degree and 2–3 years of experience. Ex. 2001 ¶ 23. Based on these descriptions, we find that the parties’ definitions of ordinary skill in the art are substantially the same, and agree with the parties that an ordinarily skilled artisan would be educated in the Chemical and Chemical Engineering arts or related disciplines. We also agree with the parties that a person having less formal education, such as a B.S. or M.S. degree, would require more years of experience than a person with more formal education, such as a Ph.D., to qualify as an ordinarily skilled artisan. We also find that neither party states how any difference in the parties’ articulated levels of skill impacts this proceeding. Thus, our analysis would be the same regardless of any minor differences between the parties’ respective articulations. Finally, we note that the level of ordinary skill in the art is reflected by the prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 20
- Novelty / Anticipation (§102) › Prior-art status of a reference › On-sale bar (Pfaff, Helsinn)UnpatentableUnpatentable
“Tr. 114:15–115:18 (emphases added). Thus, we find that Patent Owner does not contest that a heat-transfer composition consisting essentially of HFO- 1234yf and PAG for AAC was in public commercial use before the March 26, 2014, filing date of the ’017 patent. Accordingly, we find that Petitioner’s evidence, together with Patent Owner’s concessions, demonstrates by a preponderance of evidence that the claimed subject matter of the ’017 patent was in commercial use before its March 26, 2014, effective filing date. See Ex. 1002 ¶¶ 399–409. In particular, as to claims 1, 3–10, 12, 13, and 15–20, we credit Dr. Brown’s uncontested testimony that the refrigerant-lubricant AAC composition of the Ford Transit Custom Bus, the Mazda CX 5 (2.0i and 2.2D), and the Opel Mocca used HFO-1234yf and a PAG lubricant as early as 2012. Ex. 1002 ¶ 399 (citing Ex. 101324, 2, 38, 55, 70). We also credit Dr. Brown’s 24 Behr Hella Services, Refrigerant and Oil Filling Quantities Passenger Cars & Commercial Vehicles 2014–15. PGR12 Ex. 1013. (“Service Guide”). PGR12 Ex. 1013. The Service Guide provides tables setting forth specifications for refrigerant type, refrigerant quantity, vehicle manufacturers’ original equipment compressor oil type, and oil filling quantity for the air-conditioning system of each vehicle listed in the tables. Id. at 2–3. Petitioner and Dr. Brown direct us to the Sevice Guide’s entries calculations, which show that the Ford Transit Custom Bus had an AAC refrigerant-lubricant composition of 26.7% of PAG lubricant and 73.3% of HFO-1234yf (Ex. 1002 ¶ 401 (citing Ex. 1013, 38)); the Mazda CX 5 2.0i had 16.7% PAG lubricant and 83.3% HFO-1234yf (Ex. 1002 ¶ 402 (citing Ex. 1013, 55)); the Mazda CX 5 2.2D had a 17.5% PAG lubricant and 82.5% HFO-1234yf (id.); and the Opal Mocca had 11.6% PAG lubricant and 88.4% HFO-1234yf (Ex. 1002 ¶ 402 (citing Ex. 1013, 70)). As to dependent claims 2, 11, and 14, which all require that the lubricant is present “in an amount from about 30% to about 50% weight,” we credit Dr. Brown’s uncontested testimony that the refrigerant-lubricant composition of the Ford Transit Custom Bus recited lubricant amount. Ex. 1002 ¶ 403. In particular, we agree with Dr. Brown that, because the lubricant accounts for 26.7% of the AAC refrigerant-lubricant composition in the Ford Transit Custom Bus, the lubricant makes up “about 30%” of the refrigerant-lubricant composition as claimed. Id. For these reasons, we find that Petitioner has met its burden to show that claims 1–20 are unpatentable for anticipation under § 102(a)(1).” slip op. at 55
Patent outcomesUS 9,157,017 unpatentable§ 102 anticipation§ 112 disclosurePatents in suitUS 9,157,017
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.