- Jiangsu Favored Nanotechnology Co., Ltd. v. P2i Ltd.All claims unpatentablePTAB · Apr 11, 2025 · IPR2024-00380 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–5, 7, and 9–14 are unpatentable as obvious over Cohen and Legein or Francesch and Legein; Petitioner’s motion to strike is denied as moot.
RulingsFinal written decision- Skill levelSkill level board ownDecided for petitioner
“The parties agree that a person of ordinary skill in the art in the field of the ’087 patent in June 20154 “would have had at least a bachelor’s degree in a field such as chemistry, physics, or chemical engineering, as well as at least two years of experience with plasma-polymerization techniques.” Pet. 20 (citing Ex. 1002 ¶¶ 22–29); PO Resp. 13 (Patent Owner stating that it “does not dispute this characterization of the level of ordinary skill in the art.”); see also PO Sur-reply 1–2 (noting both parties’ agreement on the education and experience level of the ordinarily skilled artisan).” slip op. at 7
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)No construction neededOther
“On the fully developed trial record, we determine that no claims need an express construction. See Nidec Motor Corp. v. Zhongshan Broad Ocean Motor Co. Ltd., 868 F.3d 1013, 1017 (Fed. Cir. 2017) (holding that only claim terms in controversy need to be construed, and only to the extent necessary to resolve the controversy (citing Vivid Techs., Inc. v. Am. Sci. & Eng’g, Inc., 200 F.3d 795, 803 (Fed. Cir. 1999))).” slip op. at 9
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Because of Patent Owner’s shifting definitions of the education and experience level of the ordinarily skilled artisan, it is unclear on the complete record what precise definition Patent Owner and Dr. Senkevitch are applying when arguing the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13; Ex. 2007 ¶¶ 30, 31, 33, 34, 37, 40, 52–55, 60, 68, 74, 76, 77, 80–86, 89, 91, 94, 95, 100, 102–105, 108, 110, 111, 113–116, 118–120, 122, 124, 127–134. We, therefore, give Dr. Senkevitch’s testimony regarding the capabilities of a person of ordinary skill in the art minimal weight, which leaves us with Patent Owner’s insufficiently supported arguments regarding the skilled artisan’s capabilities. PO Resp. 13, 22–27, 31–32, 34–40; PO Sur-reply 1–6, 11–13. Moreover, as Petitioner correctly points out, the ʼ087 patent expressly teaches that the precise conditions for forming a protective polymeric coating “will vary depending upon factors such as, without limitation, the nature of the monomer compound, the crosslinking agent, the substrate, as well as the desired properties of the coating” and that such “conditions can be determined using routine methods.” Ex. 1001 15:1–15:5 (emphasis added); Pet. Reply 17. Where the patent itself leaves to the judgment of an ordinarily skilled artisan the assessment of these factors to ascertain suitable conditions for forming the protective coating, we find persuasive Petitioner’s view that it would have been well within the level of ordinary skill to ascertain such suitable conditions.” slip op. at 20
- Obviousness (§103) › Analogous artAnalogous artDecided for petitioner
“We disagree with Patent Owner. Although the claims of the ʼ087 patent recite obtaining the protective cross-linked polymeric coating “by exposing the device or component to a plasma,” the field of endeavor analysis in an analogous art inquiry does not exclusively turn on the claims at issue, but rather takes account of the entirety of a patent’s disclosure. See In re Bigio, 381 F.3d 1320, 1326 (Fed. Cir. 2004) (explaining that “the PTO must show adequate support for its findings on the scope of the field of endeavor in the application’s written description and claims” (emphasis added)); In re Mettke, 570 F.3d 1356, 1359 (Fed. Cir. 2009) (rejecting an argument that the field of endeavor was limited to a claimed “Internet terminal” when “the specification describes various communication media, including facsimile machines and email, as related to the invention.”). This is significant here because the ʼ087 patent discloses that “[t]he … invention relates to protective coatings” and specifically “relates to protective coatings for electronic or electrical devices and components thereof, and methods of forming such coatings.” Ex. 1001, 1:14–17. Based on this disclosure, we find that the ʼ087 patent’s field of endeavor relates to “protective coatings for electronic or electrical devices and components thereof” broadly, not just those formed on such devices or components via a plasma polymerization process as asserted by Patent Owner. Id. Although Cohen does not explicitly disclose that its crosslinked polymers constitute a “protective coating,” Cohen does disclose that its “copolymerizable mixture can be cast into films” (Ex. 1004, 2:61–62), that the polymerization can “effected in situ,” and that the polymers may be used in “numerous” electrical applications (id. at 5:17–25). Tr. 8:9–10:2, 27:2– 21; see Pet. Reply 5 (explaining how “Cohen described insulating polymers that could be applied as films and be used to protect substrates including cables and electrical coils.” (citing Ex. 1004, 2:60–63, 5:13–25)). These disclosures suggest strongly that Cohen’s crosslinked polymers––if cast into a film or formed in situ on an electrical device or component––would serve as a protective coating on that electrical device or component, even though Cohen does not expressly refer to its crosslinked polymers ipsis verbis as a “protective coating.” Thus, we find that Cohen is within the field of endeavor of the ʼ087 patent.” slip op. at 15
Patent outcomesUS 11,041,087 unpatentableClaim construction§ 103 obviousnesscites KSR · GrahamPatents in suitUS 11,041,087 - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00071 · APJ Julia Heaney · IPR · Final written decision
Claims 3–5, 8, 11, 20–22, 27–29, 31, and 33 are unpatentable as obvious over the stated combinations of prior art and skilled-artisan knowledge.
RulingsFinal written decision- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionDecided for petitioner
“On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.” Our analysis begins with the claim language. The term “adhesion layer” appears in each of the ’806 patent’s independent claims, which include both method and device claims. See, e.g., Ex. 1001, 13:44–63 (claim 1 directed to a “semiconductor device”); id. at 17:58–18:17 (claim 30 directed to a “method of manufacturing a semiconductor device”). Claim 1 recites “a first semiconductor chip having a first adhesion layer adhered to its back surface” and “a second semiconductor chip having a second adhesion layer adhered to its back surface.” Id. at 13:49–51, 13:54–56 (emphasis added). Claim 30 recites the steps of “forming a first insulating adhesion layer on a back surface of a first wafer” and “forming a second insulating adhesion layer on a back surface of a second wafer.” Id. at 17:60–62, 18:3–5 (emphases added). In the absence of contrary evidence, we must assume that the term “adhesion layer” has the same meaning in all claims of the ’806 patent. In re Varma, 816 F.3d 1352, 1363 (Fed. Cir. 2016) (“the principle that the same phrase in different claims of the same patent should have the same meaning is a strong one, overcome only if ‘it is clear’ that the same phrase has different meanings in different claims,” quoting Fin Control Sys. Pty, Ltd. v. OAM, Inc., 265 F.3d 1311, 1318 (Fed. Cir. 2001)). The language of claim 30 and similarly worded claims of the ’806 patent suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer and need not be pre-formed, as argued by Patent Owner. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of claims 30 and 31 does not support Patent Owner’s construction that the “adhesion layer” must be a pre-formed layer that is adhered. Cf. PO Resp. 22–25 (arguing for that construction).” slip op. at 17
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Citing testimony from Dr. Suhling, Petitioner asserts that a person of ordinary skill in the art at the priority date of the ’806 patent would have had i) a bachelor-level degree in electrical engineering, mechanical engineering, material science, or a related subject and five or more years of experience working in the field of semiconductor packaging; ii) a Master’s-level degree in mechanical engineering, electrical engineering, material science, or a related field, and at least 1-3 years of experience in the design/development of semiconductor packages; or iii) a Ph.D.- level degree in mechanical engineering, material science, electrical engineering, or a related field, and at least some experience in the area of semiconductor packaging. Pet. 17–18 (citing Ex. 1002 ¶¶ 28–32). Petitioner further states that “[a]dditional education may substitute for professional experience, and significant work experience may substitute for formal education.” Pet. 18. Patent Owner’s declarant, Mr. Elenius, states that a person of ordinary skill in the art would have had “a bachelor’s degree in electrical, mechanical or materials engineering and two to three years of experience in the design or development of semiconductor manufacturing, or the equivalent.” Ex. 2014 ¶ 32. Mr. Elenius further states that “[a]dditional graduate education could substitute for professional experience, or significant experience in the field could substitute for formal education.” Id. For purposes of this Decision, we find no meaningful differences” slip op. at 14
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“3. Reasons to Combine Petitioner contends that it would have been obvious for a person of ordinary skill in the art to combine Ball’s teachings of stacking chips with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 28–29. Petitioner contends that a person of ordinary skill would have been motivated to combine the teachings of Ball and Mostafazadeh for several reasons, including to provide a more efficient manufacturing process for multichip modules and to simplify the stacking process. Pet. 28–31. Patent Owner argues that a person of ordinary skill would not have been motivated to combine Mostafazadeh with Ball because there would have been no reasonable expectation of success and the combination would not have resulted in a functioning semiconductor device. PO Resp. 39. Patent Owner asserts that Petitioner’s combination of Ball and Mostafazadeh would fail for multiple reasons and that Mostafazadeh does not describe multi-chip stacked mounting. Id. at 39–52. Having considered the evidence and arguments, we determine that the preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module with Mostafazadeh’s process for applying adhesive at the wafer stage and then dicing to create individual chips with adhesive backsides. Pet. 28–31. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s combination. Ball teaches a stacked multichip module using flip-chip and wire bond interconnections, where a lower chip is flip-chip connected to a substrate using metal bumps, and an upper chip is wire bond connected to the substrate. Ex. 1005, Abstract, 3:42–64, 4:58–59, 5:3–12, 5:18–20, 5:23– 27, Fig. 1. Ball teaches that the upper chip is attached to the lower chip in a back-to-back arrangement with a layer of adhesive applied over a back side of the lower chip. Id. Mostafazadeh teaches a method for applying integrated circuit dies to support surfaces. Ex. 1003, Abstract. In Mostafazadeh’s method, an adhesive coating is formed on a surface of a semiconductor wafer, the adhesive coating is dried, and the semiconductor wafer is diced to form integrated circuit dies, each having an adhesive layer on its mounting surface, i.e., its back surface. Id. at 3:5–11, 5:20–25, 7:9–11, 7:29–8:2, Fig. 2 (steps 104–110). A selected die is then attached to an associated support surface by placing the adhesive layer of the selected die in contact with the associated support surface. Id. at 3:11–13, 8:10–12, Fig. 2 (steps 112–118).” slip op. at 33
- Obviousness (§103) › Graham factors (scope of art, differences, level of skill)UnpatentableUnpatentable
“After considering the parties’ arguments and evidence, we determine that Petitioner meets its burden of proof for claim element [3d]. Our finding is supported by Figure 1 of Ball, which depicts a second chip mounted to a first chip in a back-to-back arrangement. Ex. 1002 ¶ 158; Ex. 1005, Fig. 1. More particularly, Ball’s Figure 1 shows that back side 32 of upper die 12 (the claimed “second semiconductor chip”) is mounted to back side 30 of lower die 14 (the claimed “first semiconductor chip”) by adhesion layer 28. Ex. 1005, 5:18–20. Relying on Dr. Suhling’s testimony, Petitioner shows persuasively that “a circuit is formed on the front surface 34 of upper die 12 . . . , as evidenced by bonding pads 36 and wires 38 connecting the upper die’s circuitry to the wiring layer on substrate 16.” Pet. 41; Ex. 1002 ¶ 159. We credit Dr. Suhling’s unrebutted testimony that, “[b]ecause the circuitry is on the front side of upper die 12, a [person of ordinary skill in the art] would know that the back surface adhesive layer is ‘where a circuit is not formed.’” Ex. 1002 ¶ 159. Patent Owner argues that, to meet claim elements [3b] and [3d], “a reference must show that an adhesion layer extends to cover the entire back surface of the second semiconductor chip where a circuit is not formed.” PO Resp. 30. We find no support in the claim language or other intrinsic evidence for Patent Owner’s argument. In our view, the phrase “back surface where a circuit is not formed” identifies the back side of the chip as opposed to the front side, where a circuit is formed. Ex. 1001, 14:26–27 (claim element [3d]). Our interpretation is supported by the claim language as a whole. Claim element [3b], for example, recites “a first semiconductor chip having a circuit forming on its front surface and an adhesion layer adhered to its back surface.” Id. at 14:17–19 (emphasis added). In this” slip op. at 47
Patent outcomesUS RE38,806 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00072 · APJ Julia Heaney · IPR · Final written decision
Claims 1, 2, 6, 7, 9, 10, 12–19, 23–26, 30, and 32 are unpatentable as obvious over the asserted combinations of prior art.
RulingsFinal written decision- Skill levelSkill level petitioner adoptedDecided for petitioner
“Although the proposals for the level of skill in the art by the parties’ declarants have differences in wording, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’806 patent, the types of problems and solutions described in the ’806 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 14
- Claim Construction › Threshold & procedure › Whether a term needs construction (O2 Micro)Term construed petitioner constructionGranted
“On the fully developed record, we find that Petitioner’s construction, “a layer that adheres,” is more strongly supported by the evidence than Patent Owner’s construction, “a pre-formed layer that is adhered.”” slip op. at 16
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“Petitioner shows persuasively that a person of ordinary skill in the art would have had a reasonable expectation of success in combining Mostafazadeh with Ball and Fogal. Pet. 32–33. The evidence discussed above concerning reasons to combine supports a reasonable expectation of success. We are also persuaded by Dr. Suhling’s testimony that the “combination of Ball, Fogal, and Mostafazadeh would require no modification of the multichip modules in Ball and Fogal: rather Mostafazadeh merely explains in more detail methods known in the art for creating chips with adhesive surfaces.” Ex. 1002 ¶ 239; see also id. ¶¶ 62– 69 (describing prior art methods for applying adhesive to the backside of a wafer). For the foregoing reasons, we find that Petitioner has demonstrated that a person of ordinary skill in the art would have had a reasonable expectation of successfully combining Ball, Fogal, and Mostafazadeh.” slip op. at 46
- ExcludeOther
“We do not discuss or cite any of these exhibits in this Decision, or rely on any of them in reaching our determination that all of the challenged claims are unpatentable. Because their presence in the record would not affect our analysis in this Decision, we dismiss as moot Petitioner’s motion with respect to these exhibits.” slip op. at 72
Patent outcomesUS RE38,806 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSR - Micron Technology, Inc. v. Katana Silicon Technologies LLCAll claims unpatentablePTAB · May 13, 2024 · IPR2023-00073 · APJ Sheldon M Mcgee · IPR · Final written decision
Claims 1–15 are unpatentable under §103: the Board found the asserted combinations taught the limitations, with motivation to combine and a reasonable expectation of success.
RulingsFinal written decision- Claim Construction › Intrinsic evidence (Phillips canons) › Plain and ordinary meaning to a POSITATerm construed petitioner constructionDecided for petitioner
“The claim language, “forming” an “adhesion layer on a back surface,” suggests strongly that an “adhesion layer” may be formed in situ on the back surface of a wafer. The testimony of Patent Owner’s expert, Mr. Elenius, supports this interpretation. See Ex. 2014 ¶¶ 43, 50 (testifying that a person of ordinary skill in the art “would recognize that there are multiple methods of forming an ‘adhesion layer’ on the back surface of the semiconductor chip” and that “[p]astes and other adhesives, adhesive agents, adhesive layers or other material that are dispensed onto a substrate or chip back are formed into a layer over time as they harden through curing” (emphasis added)). Thus, the language of the claims of the ʼ879 patent does not support Patent Owner’s construction that the “adhesion layer” must be a preformed layer that is adhered. Cf. PO Resp. 21–23 (arguing for that construction).” slip op. at 16
- Skill levelSkill level petitioner adoptedDecided for petitioner
“For purposes of this Decision, we find no meaningful differences between the parties’ respective definitions that would materially alter the outcome of this Decision. Nevertheless, based on our review of the ’879 patent, the types of problems and solutions described in the ’879 patent, and cited prior art, we adopt and apply Petitioner’s definition of the level of ordinary skill in the art.” slip op. at 13
- Expert testimonyPetitioner expert creditedPatent owner expert discountedDecided for petitioner
“Mostafazadeh, could overflow.” PO Resp. 41, 42 (citing Ex. 2014 ¶ 121). According to Patent Owner, the downward pressure during mounting “could cause adhesive to squeeze out.” Id. at 41. We find that Patent Owner’s argument and the corresponding testimony of Mr. Elenius are speculative and do not outweigh Petitioner’s evidence of obviousness. The overflow issue was recognized and addressed by Mostafazadeh. Contrary to Patent Owner’s argument, Mostafazadeh provides explicitly that its adhesive layer “covers an entire mounting surface 190 of the selected integrated circuit dies 182 and does not extend beyond a boundary of the mounting surface 190.” Ex. 1003, 10:6–9 (emphasis added). Additionally, Mostafazadeh teaches that when “the adhesive layer is rolled on, it is exactly the same size as the mounting surface and is quite even. Thus, when the die is attached to its supporting surface the adhesive does not extend beyond the mounting surface of the die.” Id. at 9:15–18. Further, Mostafazadeh teaches that its process avoids the adhesive jutting around the edges of the die. Id. at 2:26–28. These teachings support that a person of ordinary skill in the art would have had a reasonable expectation of successfully applying Mostafazadeh’s die attachment method to Ball’s multichip device while avoiding adhesive overflow. Next, Patent Owner argues that Petitioner’s combination would fail” slip op. at 40
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundUnpatentable
“preponderance of the evidence favors Petitioner. Petitioner demonstrates persuasively that a person of ordinary skill in the art would have had reasons to combine Ball’s stacked multichip module using flip-chip and wire bond connections with Mostafazadeh’s process for applying adhesive to create individual chips with adhesive backsides. Pet. 25–28. In particular, Petitioner shows that a person of ordinary skill in the art would have considered Mostafazadeh’s teaching of applying the adhesive to a wafer surface and then subsequently dicing the wafer in order to provide a more efficient manufacturing process for multichip modules and to simplify Ball’s process of stacking chips. Id.; see KSR, 550 U.S. at 417 (stating that the “mere application of a known technique to a piece of prior art ready for the improvement” suggests obviousness). The teachings of both Ball and Mostafazadeh support Petitioner’s” slip op. at 33
Patent outcomesUS 6,352,879 unpatentableClaim construction§ 103 obviousnesscites Phillips · KSRPatents in suitUS 6,352,879 - Arkema Inc. / Arkema France v. Honeywell International Inc.All claims unpatentablePTAB · Aug 25, 2022 · PGR2016-00012 · APJ Sheldon M Mcgee · PGR · Remand
Claims 1–20 are unpatentable under § 102(a) for prior public use; the Board did not reach the remaining anticipation, obviousness, and enablement grounds.
RulingsRemand decision- RemandOther
“On October 1, 2019, the Federal Circuit held that we “abused [our] discretion by assuming the authority that 35 U.S.C. § 255 expressly delegates to the Director: to determine when a Certificate of Correction is appropriate,” and vacated our Final Written Decision. Honeywell Int’l Inc. v. Arkema Inc., 939 F.3d 1345 (Fed. Cir. 2019). The Federal Circuit instructed us to “authorize Honeywell to file a motion seeking leave to petition the Director for a Certificate of Correction.” Id. at 1351. Pursuant to the Federal Circuit’s mandate, we gave our authorization, and Patent Owner filed its Motion for Leave to Request a Certificate of Correction. PGR11 Paper 61; PGR12 Paper 41. After additional briefing from the parties was complete, we granted Patent Owner’s Motion. PGR11 Paper 77; PGR12 Paper 57. Patent Owner filed its Request for a Certificate of Correction, as well as a Petition to Accept [Unintentionally] Delayed Claim to Priority under 35 U.S.C. § 120 and 37 C.F.R. § 1.78. PGR11 Ex. 2174; PGR12 Ex. 2172.” slip op. at 3
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateDecided for petitioner
“Synthes USA, LLC v. Spinal Kinetics, Inc., 734 F.3d 1332, 1344 (Fed. Cir. 2013). And, although there are no bright-line rules for the amount of disclosure needed in an unpredictable art, that amount “necessarily changes with each invention” and “changes with progress in the field.” Ariad, 598 F.3d at 1351. Here, we find that the art of AAC was unpredictable and that a heat-transfer composition for AAC required specific technical features that were unpredictable and unexpected. Thus, we conclude that the ’525 application requires a more-detailed disclosure than would be required in a predictable field to adequately demonstrate possession of a heat-transfer composition consisting essentially of HFO-1234yf and PAG for use in AAC. (iii) Disclosure in the ’525 Application With these background findings in mind, we now turn to the four corners of the ’525 application—and we find that the ’525 application does not contain the detailed disclosure needed in this case to reasonably convey possession of a heat-transfer composition consisting essentially of HFO- 1234yf and PAG for use in AAC.” slip op. at 37
- Skill levelSkill level board ownDecided for patent owner
“develops new refrigerants for use as heat transfer fluids. Ex. 1002 ¶ 149. Such a person would have had a Ph.D. in Chemistry, Chemical Engineering, Mechanical Engineering, Material Science, or a related field or discipline and at least 3 to 5 years of experience, or alternatively an M.S. degree and 5 to 10 years of experience. Id. Patent Owner’s Declarant, Dr. Bivens, provides a similar description of the person of ordinary skill in the art, stating that such a person would have a B.S. degree in Chemical Engineering or Chemistry, and five years of work experience, or a Ph.D. or M.S. degree and 2–3 years of experience. Ex. 2001 ¶ 23. Based on these descriptions, we find that the parties’ definitions of ordinary skill in the art are substantially the same, and agree with the parties that an ordinarily skilled artisan would be educated in the Chemical and Chemical Engineering arts or related disciplines. We also agree with the parties that a person having less formal education, such as a B.S. or M.S. degree, would require more years of experience than a person with more formal education, such as a Ph.D., to qualify as an ordinarily skilled artisan. We also find that neither party states how any difference in the parties’ articulated levels of skill impacts this proceeding. Thus, our analysis would be the same regardless of any minor differences between the parties’ respective articulations. Finally, we note that the level of ordinary skill in the art is reflected by the prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 20
- Novelty / Anticipation (§102) › Prior-art status of a reference › On-sale bar (Pfaff, Helsinn)UnpatentableUnpatentable
“Tr. 114:15–115:18 (emphases added). Thus, we find that Patent Owner does not contest that a heat-transfer composition consisting essentially of HFO- 1234yf and PAG for AAC was in public commercial use before the March 26, 2014, filing date of the ’017 patent. Accordingly, we find that Petitioner’s evidence, together with Patent Owner’s concessions, demonstrates by a preponderance of evidence that the claimed subject matter of the ’017 patent was in commercial use before its March 26, 2014, effective filing date. See Ex. 1002 ¶¶ 399–409. In particular, as to claims 1, 3–10, 12, 13, and 15–20, we credit Dr. Brown’s uncontested testimony that the refrigerant-lubricant AAC composition of the Ford Transit Custom Bus, the Mazda CX 5 (2.0i and 2.2D), and the Opel Mocca used HFO-1234yf and a PAG lubricant as early as 2012. Ex. 1002 ¶ 399 (citing Ex. 101324, 2, 38, 55, 70). We also credit Dr. Brown’s 24 Behr Hella Services, Refrigerant and Oil Filling Quantities Passenger Cars & Commercial Vehicles 2014–15. PGR12 Ex. 1013. (“Service Guide”). PGR12 Ex. 1013. The Service Guide provides tables setting forth specifications for refrigerant type, refrigerant quantity, vehicle manufacturers’ original equipment compressor oil type, and oil filling quantity for the air-conditioning system of each vehicle listed in the tables. Id. at 2–3. Petitioner and Dr. Brown direct us to the Sevice Guide’s entries calculations, which show that the Ford Transit Custom Bus had an AAC refrigerant-lubricant composition of 26.7% of PAG lubricant and 73.3% of HFO-1234yf (Ex. 1002 ¶ 401 (citing Ex. 1013, 38)); the Mazda CX 5 2.0i had 16.7% PAG lubricant and 83.3% HFO-1234yf (Ex. 1002 ¶ 402 (citing Ex. 1013, 55)); the Mazda CX 5 2.2D had a 17.5% PAG lubricant and 82.5% HFO-1234yf (id.); and the Opal Mocca had 11.6% PAG lubricant and 88.4% HFO-1234yf (Ex. 1002 ¶ 402 (citing Ex. 1013, 70)). As to dependent claims 2, 11, and 14, which all require that the lubricant is present “in an amount from about 30% to about 50% weight,” we credit Dr. Brown’s uncontested testimony that the refrigerant-lubricant composition of the Ford Transit Custom Bus recited lubricant amount. Ex. 1002 ¶ 403. In particular, we agree with Dr. Brown that, because the lubricant accounts for 26.7% of the AAC refrigerant-lubricant composition in the Ford Transit Custom Bus, the lubricant makes up “about 30%” of the refrigerant-lubricant composition as claimed. Id. For these reasons, we find that Petitioner has met its burden to show that claims 1–20 are unpatentable for anticipation under § 102(a)(1).” slip op. at 55
Patent outcomesUS 9,157,017 unpatentable§ 102 anticipation§ 112 disclosurePatents in suitUS 9,157,017 - Arkema Inc. / Arkema France v. Honeywell International Inc.All claims unpatentablePTAB · Aug 25, 2022 · PGR2016-00011 · APJ Grace Karaffa Obermann · PGR · Remand
Claims 1–20 are unpatentable under § 102(a) for prior public use; the Board did not reach the other anticipation, obviousness, and enablement grounds.
RulingsRemand decision- RemandOther
“On October 1, 2019, the Federal Circuit held that we “abused [our] discretion by assuming the authority that 35 U.S.C. § 255 expressly delegates to the Director: to determine when a Certificate of Correction is appropriate,” and vacated our Final Written Decision. Honeywell Int’l Inc. v. Arkema Inc., 939 F.3d 1345 (Fed. Cir. 2019). The Federal Circuit instructed us to “authorize Honeywell to file a motion seeking leave to petition the Director for a Certificate of Correction.” Id. at 1351. Pursuant to the Federal Circuit’s mandate, we gave our authorization, and Patent Owner filed its Motion for Leave to Request a Certificate of Correction. PGR11 Paper 61; PGR12 Paper 41. After additional briefing from the parties was complete, we granted Patent Owner’s Motion. PGR11 Paper 77; PGR12 Paper 57. Patent Owner filed its Request for a Certificate of Correction, as well as a Petition to Accept [Unintentionally] Delayed Claim to Priority under 35 U.S.C. § 120 and 37 C.F.R. § 1.78. PGR11 Ex. 2174; PGR12 Ex. 2172.” slip op. at 3
- Skill levelSkill level board ownDecided for petitioner
“develops new refrigerants for use as heat transfer fluids. Ex. 1002 ¶ 149. Such a person would have had a Ph.D. in Chemistry, Chemical Engineering, Mechanical Engineering, Material Science, or a related field or discipline and at least 3 to 5 years of experience, or alternatively an M.S. degree and 5 to 10 years of experience. Id. Patent Owner’s Declarant, Dr. Bivens, provides a similar description of the person of ordinary skill in the art, stating that such a person would have a B.S. degree in Chemical Engineering or Chemistry, and five years of work experience, or a Ph.D. or M.S. degree and 2–3 years of experience. Ex. 2001 ¶ 23. Based on these descriptions, we find that the parties’ definitions of ordinary skill in the art are substantially the same, and agree with the parties that an ordinarily skilled artisan would be educated in the Chemical and Chemical Engineering arts or related disciplines. We also agree with the parties that a person having less formal education, such as a B.S. or M.S. degree, would require more years of experience than a person with more formal education, such as a Ph.D., to qualify as an ordinarily skilled artisan. We also find that neither party states how any difference in the parties’ articulated levels of skill impacts this proceeding. Thus, our analysis would be the same regardless of any minor differences between the parties’ respective articulations. Finally, we note that the level of ordinary skill in the art is reflected by the prior art of record. Okajima v. Bourdeau, 261 F.3d 1350, 1355 (Fed. Cir. 2001) (the prior art itself can reflect the appropriate level of ordinary skill in the art).” slip op. at 20
- Disclosure Requirements (§112) › Written description (Ariad)Not entitled to earlier dateNot shown unpatentable
“We agree with Petitioner that the ’525 application’s statement that the compounds are “adaptable for use” weighs against a finding of adequate written description. First, “adaptable for use” is vague, as Dr. Bivens acknowledges. See Ex. 1177, 151:15 (testifying that “adaptable for use can have a wide range of meaning”). Second, the ’525 application gives no direction on how a skilled artisan would need to adapt any particular composition for use in AAC, or even if any “adaptation” was necessary. We find that such a teaching is important in this case to show that the inventors had possession of the claimed invention, given our findings above that the art of AAC was unpredictable and that a heat-transfer composition for AAC required specific technical features that were unpredictable and unexpected. For completeness, we again reject Patent Owner’s argument that “[t]o show the inventors possessed claim 1 requires no more” than the statement in the written description that “‘the compositions of the present invention are believed to be adaptable . . . with or without system modification.’” PGR12 Resp. 27–28 (quoting Ex. 1001, 7:4–8). Regardless of the exact wording of claim 1, the inventors “still [had to have] describe[d] some way of performing the claimed methods.” Ariad, 598 F.3d at 1355. And here, with merely a passing reference to AAC, the ’525 application fails to provide any credible “technologic knowledge” to demonstrate to an ordinarily skilled artisan that Patent Owner “was in possession of the invention that is claimed.” Id.” slip op. at 43
- Novelty / Anticipation (§102) › Prior-art status of a reference › On-sale bar (Pfaff, Helsinn)UnpatentableUnpatentable
“unless . . . the claimed invention was . . . in public use . . . before the effective filing date of the claimed invention.” 35 U.S.C. § 102(a)(1). “The proper test for the public use prong . . . is whether the purported use was accessible to the public or was commercially exploited.” Delano Farms Co. v. Cal. Table Grape Comm’n, 778 F.3d 1243, 1247 (Fed. Cir. 2015) (quotation omitted). “Commercial exploitation is a clear indication of public use . . . .” Invitrogen Corp. v. Biocrest Mfg., L.P., 424 F.3d 1374, 1380 (Fed. Cir. 2005).” slip op. at 53
Patent outcomesUS 9,157,017 unpatentable§ 102 anticipation§ 112 disclosurePatents in suitUS 9,157,017 - Google LLC / Samsung Electronics Co., Ltd. et al. v. Parus Holdings, Inc.All claims unpatentablePTAB · Oct 19, 2021 · IPR2020-00846 · APJ David C Mckone · IPR · Final written decision
Claims 1, 2, 4–7, 9, 10, 13, and 14 are unpatentable as obvious over the stated prior-art combinations.
RulingsFinal written decision- BurdenNew argument disregardedDecided for petitioner
“According to our rules, “[a]rguments must not be incorporated by reference from one document into another document.” 37 C.F.R. § 42.6(a)(3). For example, the Board has explained that “parties that incorporate expert testimony by reference in their petitions, motions, or replies without providing explanation of such testimony risk having the testimony not considered by the Board.” Patent Trial and Appeal Board Consolidated Trial Practice Guide 35–36 (November 2019) (“TPG”)3 (citing Cisco Systems, Inc. v. C-Cation Techs., LLC, IPR2014-00454 (PTAB Aug. 29, 2014) (Paper 12) (informative)).” slip op. at 14
- Skill levelSkill level petitioner adoptedDecided for petitioner
“Petitioner, relying on the testimony of Mr. Lipoff, contends that a person of ordinary skill in the art “would have had a Bachelor’s Degree in electrical engineering, computer science or a related field, and at least two years of experience with voice interfaces and information processing,” and that “[m]ore education could substitute for less experience, and vice versa.” Pet. 5 (citing Ex. 1002 ¶¶ 41–48). Patent Owner does not contest Petitioner’s proposal or offer an alternative. On the complete record, we are persuaded that Petitioner’s proposal is consistent with the technology 7 The complete record does not include allegations or evidence of objective indicia of nonobviousness. described in the Specification and the cited prior art and adopt Petitioner’s proposed level of skill.” slip op. at 26
- Obviousness (§103) › Motivation to combine / reasonable expectation of success › Teaching awayTeaching away not foundDecided for petitioner
“proposed combination with Kovatch. PO Resp. 37. According to the Federal Circuit, “[a] reference may be said to teach away when a person of ordinary skill, upon reading the reference, would be discouraged from following the path set out in the reference, or would be led in a direction divergent from the path that was taken by the applicant.” In re Mouttet, 686 F.3d 1322, 1333–34 (Fed. Cir. 2012) (quoting In re Gurley, 27 F.3d 551, 553 (Fed. Cir. 1994)) (alteration in original). However, “the ‘mere disclosure of alternative designs does not teach away.’” Id. at 1334 (quoting In re Fulton, 391 F.3d 1195, 1201 (Fed. Cir. 2004)). Indeed, “just because better alternatives exist in the prior art does not mean that an inferior combination is inapt for obviousness purposes.” Id. (citing Gurley, 27 F.3d at 553). Specifically, Patent Owner (PO Resp. 37), points to disclosure in Neal describing disadvantages of a keyword search strategy (e.g., “users must be familiar with the appropriate key word terms that are likely to yield the desired data records”) and disadvantages of a classification search strategy (e.g., “users may not always anticipate the proper classification of certain records, and may search the wrong categories for their desired database record”). Ex. 1007, 2:16–65. Neal then describes a “preferred embodiment” in which “the system manager will expand the scope of the search strategies from ‘exact’ string matches, along a continuum of search methodologies, including perhaps fuzzy logic strategies.” Id. at 7:14–17. According to Neal, “[t]he purpose of expanding the search strategies is to avoid the situation wherein the search fails to identify the desired item from any data set, and thereby drops into logical block 222 a negative search result is reported to the user.” Id. at 7:28–32. Patent Owner argues that “Neal advocates for employing a sequence of search algorithms from the narrowest to the most broad.” PO Resp. 38 (citing Ex. 1007, 7:56–58; Ex. 2059 ¶ 124). Patent Owner contends that Neal teaches away from a combination “that employs a single keyword matching search strategy.” Id. Patent Owner argues that Petitioner’s combination of Kovatch and Neal results in a system that only sequentially searches datasets using a single keyword matching search strategy, and not the cascading sequence of search methodologies described by Neal. Id. at 37–39. We do not agree with Patent Owner that Neal teaches away from a system that employs a single keyword matching search strategy. Indeed, Neal’s preferred embodiment expressly contemplates such a system. For example, Neal describes employing a first “exact string search” methodology to search a first data set (Figure 2, block 206). Ex. 1007, 6:34– 46. This appears to be what Patent Owner considers a “single keyword matching search strategy.” PO Resp. 37–38. Neal describes that if this search of the first data set does not yield a match, the system searches a second data set using a second search methodology (Figure 2, block 210). Ex. 1007, 6:47–52. However, in the preferred embodiment there is no requirement that the second search methodology in 210 must be different from the first search methodology in 206. For example, if the first preferred supplier did not yield an exact string match to the input search term, the same search methodology could be applied to a second preferred supplier’s catalog. Id. at 6:59–65. Thus, Neal expressly teaches using a single keyword search strategy on a first dataset and the same keyword search strategy on a second dataset, without necessarily employing a cascading sequence of different search methodologies. See Reply 19.” slip op. at 39
- Obviousness (§103) › Motivation to combine / reasonable expectation of successMotivation foundReasonable expectation foundDecided for petitioner
“advertisements while waiting for information to be retrieved; rather, it first retrieves the requested information and then generates an audio stream with both the commercials and retrieved information. Reply 22–23 (citing Ex. 1005, 14:1–8, 18:1–15; Ex. 1057 ¶ 18). Petitioner’s characterization of Kovatch is correct (and Patent Owner’s incorrect). Kovatch’s system first navigates to a destination and retrieves requested information (step 6), then generates commercials (step 8), then intermixes the commercials and information (step 9), and finally returns speech to the user (step 10). Ex. 1005, 14:1–8. We find unavailing Patent Owner’s argument that, when combined, Neal’s teachings would have an adverse impact on Kovatch’s generation and presentation of advertisements.” slip op. at 45
Patent outcomesUS 7,076,431 unpatentable§ 103 obviousness§ 112 disclosurecites Phillips · GrahamPatents in suitUS 7,076,431
Holdings, summaries, rulings, issues, outcomes, winners and claim constructions shown for a decision were generated by a large language model reading the opinion. They are a guide to the decision, not the decision. Confirm every one against the court's own text before relying on it. Outcomes read from the patent owner’s side. Party names are extracted from the decision and are missing on about 900 short Director denials and scans, which carry the trial number instead.